mirror of
https://github.com/clockworkpi/bluetooth.git
synced 2026-06-02 09:06:53 +02:00
Updated Home (markdown)
10
Home.md
10
Home.md
@@ -1,7 +1,7 @@
|
|||||||
1. Update the uImage and sun8i-r16-clockworkpi-cpi3.dtb under the boot partition in the SD card and reboot GS.
|
1. Update the [uImage](https://github.com/clockworkpi/bluetooth/blob/master/uImage) and [sun8i-r16-clockworkpi-cpi3.dtb](https://github.com/clockworkpi/bluetooth/blob/master/sun8i-r16-clockworkpi-cpi3.dtb) under the boot partition in the SD card and reboot GS.
|
||||||
2. Copy the Bluetooth chip firmware bcm43438a0.hcd to /lib/firmware/brcm/
|
2. Copy the Bluetooth chip firmware [bcm43438a0.hcd](https://github.com/clockworkpi/bluetooth/blob/master/bcm43438a0.hcd) to /lib/firmware/brcm/
|
||||||
3. Copy the firmware burning program brcm_patchram_plus to /usr/bin/ and add the executable permission “chmod +x /usr/bin/brcm_patchram_plus”.
|
3. Copy the firmware burning program [brcm_patchram_plus](https://github.com/clockworkpi/bluetooth/blob/master/brcm_patchram_plus) to /usr/bin/ and “`chmod +x /usr/bin/brcm_patchram_plus`”.
|
||||||
4. sudo apt-get install bluez
|
4. `sudo apt-get install bluez`
|
||||||
5. Load the Bluetooth driver with the following command:
|
5. Load the Bluetooth driver with the following command:
|
||||||
|
|
||||||
<pre>
|
<pre>
|
||||||
@@ -18,7 +18,7 @@ After loading, you can see the Bluetooth device with hciconfig:
|
|||||||
<pre>
|
<pre>
|
||||||
cpi@clockworkpi:~$ hciconfig
|
cpi@clockworkpi:~$ hciconfig
|
||||||
hci0: Type: Primary Bus: UART
|
hci0: Type: Primary Bus: UART
|
||||||
BD Address: B0:F1:EC:2D:07:5B ACL MTU: 1021:8 SCO MTU: 64:1
|
BD Address: aa:22:33:44:55:66 ACL MTU: 1021:8 SCO MTU: 64:1
|
||||||
UP RUNNING PSCAN
|
UP RUNNING PSCAN
|
||||||
RX bytes:1193 acl:1 sco:0 events:64 errors:0
|
RX bytes:1193 acl:1 sco:0 events:64 errors:0
|
||||||
TX bytes:2339 acl:2 sco:0 commands:54 errors:0
|
TX bytes:2339 acl:2 sco:0 commands:54 errors:0
|
||||||
|
|||||||
Reference in New Issue
Block a user