From f60a0ce3dba719c7c4c5c50d577ce422640806bc Mon Sep 17 00:00:00 2001
From: dphys <dphys.net@gmail.com>
Date: Fri, 10 Aug 2018 22:00:06 +0800
Subject: [PATCH] Updated Home (markdown)

---
 Home.md | 30 +++++++++++++++++++++++++++---
 1 file changed, 27 insertions(+), 3 deletions(-)

diff --git a/Home.md b/Home.md
index e491e75..d7577f8 100644
--- a/Home.md
+++ b/Home.md
@@ -7,14 +7,14 @@
 <pre>
 sudo rfkill block 0
 sudo rfkill unblock 0
-sudo brcm_patchram_plus --patchram /lib/firmware/brcm/bcm43438a0.hcd --enable_hci --bd_addr aa:22:33:44:55:66 --no2bytes --tosleep 5000 /dev/ttyS1
+sudo brcm_patchram_plus --patchram /lib/firmware/brcm/bcm43438a0.hcd --enable_hci --bd_addr B0:F1:EC:2D:07:5B --no2bytes --tosleep 5000 /dev/ttyS1
 </pre>
 
-"--bd_addr aa:22:33:44:55:66" is to set the Bluetooth MAC address, recommended to read the wifi MAC address and change the last bit as the Bluetooth MAC address.
+"--bd_addr B0:F1:EC:2D:07:5B" is to set the Bluetooth MAC address, recommended to read the WiFi MAC address and change the last bit as the Bluetooth MAC address.
 
 If the driver loads successfully, you can see "Done setting line discpline", currently it takes **about 20 seconds** (this is an issue).
 
-After loading, you can see the Bluetooth device with hciconfig:
+After loading, you can see the Bluetooth device with `hciconfig`:
 <pre>
 cpi@clockworkpi:~$ hciconfig 
 hci0:   Type: Primary  Bus: UART
@@ -23,3 +23,27 @@ hci0:   Type: Primary  Bus: UART
         RX bytes:1193 acl:1 sco:0 events:64 errors:0
         TX bytes:2339 acl:2 sco:0 commands:54 errors:0
 </pre>
+
+Now you can use the command `bluetoothctl` to connecting a Bluetooth device:
+<pre>
+cpi@clockworkpi:~$ bluetoothctl 
+[NEW] Controller B0:F1:EC:2D:07:5B clockworkpi [default]
+
+[bluetooth]# scan on
+Discovery started
+[CHG] Device 34:88:5D:3B:CB:6F LegacyPairing: yes
+[CHG] Device 34:88:5D:3B:CB:6F RSSI: -72
+[CHG] Device 34:88:5D:3B:CB:6F Class: 0x002540
+[CHG] Device 34:88:5D:3B:CB:6F Icon: input-keyboard
+
+[bluetooth]# connect 34:88:5D:3B:CB:6F
+Attempting to connect to 34:88:5D:3B:CB:6F
+[CHG] Device 34:88:5D:3B:CB:6F Connected: yes
+Connection successful
+[Keyboard K480]# [12027.524551] hid-generic 0005:046D:B33C.0003: unknown main item tag 0x0
+[12027.535022] input: Keyboard K480 as /devices/platform/soc@01c00000/1c28400.serial/tty/ttyS1/hci0/hci0:12/0005:046D:B33C.0003/input/input3
+[12027.548045] hid-generic 0005:046D:B33C.0003: input: BLUETOOTH HID v28.02 Keyboard [Keyboard K480] on b0:f1:ec:2d:07:5b
+[CHG] Device 34:88:5D:3B:CB:6F ServicesResolved: yes
+</pre>
+
+`Pair 34:88:5D:3B:CB:6F` is required for pairing before the first connection.
\ No newline at end of file