mirror of
https://github.com/FunKey-Project/FunKey-Project.github.io.git
synced 2026-11-02 03:00:18 +01:00
add boot rom description
Signed-off-by: Michel-FK <michel.stempin@funkey-project.com>
This commit is contained in:
Michel-FK
@@ -3,7 +3,9 @@ pretty straightforward. It only require a standard **Phillips
|
||||
screwdriver (PH0)** and **tweezers**.
|
||||
|
||||
!!! note
|
||||
FunKey Project is not responsible for any damage done to your console during a teardown.
|
||||
|
||||
FunKey Project is not responsible for any damage done to your
|
||||
console during a teardown.
|
||||
|
||||
### **STEP 1 - Removing the screws** {.step-title}
|
||||
|
||||
@@ -15,16 +17,18 @@ Using a standard **Phillips PH0 screwdriver**, remove the 2 screws on
|
||||
the back of your FunKey S.
|
||||
|
||||
!!! warning
|
||||
Be careful to use the correct screwdriver head size and type to
|
||||
prevent damaging the screws (do not use JIS screwdrivers).
|
||||
FunKey Project is not responsible for replacing damaged screws.
|
||||
|
||||
Be careful to use the correct screwdriver head size and type to
|
||||
prevent damaging the screws (do not use JIS screwdrivers). FunKey
|
||||
Project is not responsible for replacing damaged screws.
|
||||
|
||||
### **STEP 2 - Opening up the console** {.step-title}
|
||||
|
||||
{.step-thumb}
|
||||
{.step-thumb}
|
||||
|
||||
Carefully remove the plastic back of the console by pulling up the hinge side first
|
||||
Carefully remove the plastic back of the console by pulling up the
|
||||
hinge side first
|
||||
|
||||
### **STEP 3 - Removing the keychain lanyard** {.step-title}
|
||||
|
||||
@@ -32,9 +36,11 @@ Carefully remove the plastic back of the console by pulling up the hinge side fi
|
||||
{.step-thumb}
|
||||
{.step-thumb}
|
||||
|
||||
Carefully remove the keychain lanyard and its axis by pulling gently (it may fall off when opening).
|
||||
Carefully remove the keychain lanyard and its axis by pulling gently
|
||||
(it may fall off when opening).
|
||||
|
||||
!!! warning
|
||||
|
||||
The axis is a small part, be careful not to loose it.
|
||||
|
||||
### **STEP 4 - Removing the LR buttons** {.step-title}
|
||||
@@ -43,7 +49,8 @@ Carefully remove the keychain lanyard and its axis by pulling gently (it may fal
|
||||
{.step-thumb}
|
||||
{.step-thumb}
|
||||
|
||||
Carefully remove the L/R plastic buttons by gently pulling them out of their axis
|
||||
Carefully remove the L/R plastic buttons by gently pulling them out of
|
||||
their axis.
|
||||
|
||||
!!! warning
|
||||
Be careful not to damage the L/R switches on the circuit board!
|
||||
@@ -54,10 +61,15 @@ Carefully remove the L/R plastic buttons by gently pulling them out of their axi
|
||||
{.step-thumb}
|
||||
{.step-thumb}
|
||||
|
||||
Lift the battery and pull gently by the top of the circuit board to unplug the battery. The battery may be stuck to the processor with double-sided adhesive, it's perfectly normal if you have to lift with a bit of force to unstick it.
|
||||
Lift the battery and pull gently by the top of the circuit board to
|
||||
unplug the battery. The battery may be stuck to the processor with
|
||||
double-sided adhesive, it's perfectly normal if you have to lift with
|
||||
a bit of force to unstick it.
|
||||
|
||||
!!! warning
|
||||
Be sure to pull on the connector and **NOT the wires** when removing the battery. It is recommended to use tweezers.
|
||||
|
||||
Be sure to pull on the connector and **NOT the wires** when
|
||||
removing the battery. It is recommended to use tweezers.
|
||||
|
||||
### **STEP 6 - Unplugging the screen** {.step-title}
|
||||
|
||||
@@ -65,9 +77,13 @@ Lift the battery and pull gently by the top of the circuit board to unplug the b
|
||||
{.step-thumb}
|
||||
{.step-thumb}
|
||||
|
||||
Now that you have access to the circuit board, you can unplug the screen.
|
||||
Now that you have access to the circuit board, you can unplug the
|
||||
screen.
|
||||
|
||||
!!! warning
|
||||
This connector is fragile, unplug it vertically without force. It is recommended to use tweezers.
|
||||
|
||||
This connector is fragile, unplug it vertically without force. It
|
||||
is recommended to use tweezers.
|
||||
|
||||
### **STEP 7 - Removing the circuit board** {.step-title}
|
||||
|
||||
@@ -75,7 +91,8 @@ Now that you have access to the circuit board, you can unplug the screen.
|
||||
{.step-thumb}
|
||||
{.step-thumb}
|
||||
|
||||
By grabbing it **by the hinge side**, gently pull up the circuit board from the plastic casing.
|
||||
By grabbing it **by the hinge side**, gently pull up the circuit board
|
||||
from the plastic casing.
|
||||
|
||||
### **STEP 8 - Removing the micro-SD card** {.step-title}
|
||||
|
||||
@@ -85,11 +102,17 @@ By grabbing it **by the hinge side**, gently pull up the circuit board from the
|
||||
Remove the micro-SD card from its socket.
|
||||
|
||||
!!! note
|
||||
|
||||
You may need to use some tweezers and pull with some strength in
|
||||
order to remove the micro-SD card from its socket, as it is
|
||||
strongly inserted to prevent loose connections.
|
||||
|
||||
!!! warning
|
||||
During this step be very careful not to damage the L/R switches. Never put the PCB on a flat surface (this would apply force on the LR switches) and do not grab the PCB by these switches.
|
||||
|
||||
During this step be very careful not to damage the L/R
|
||||
switches. Never put the PCB on a flat surface (this would apply
|
||||
force on the LR switches) and do not grab the PCB by these
|
||||
switches.
|
||||
|
||||
### **STEP 9 - Removing the buttons** {.step-title}
|
||||
|
||||
@@ -97,14 +120,15 @@ Remove the micro-SD card from its socket.
|
||||
{.step-thumb}
|
||||
{.step-thumb}
|
||||
|
||||
Remove the buttons from their socket. It is recommended to use tweezers.
|
||||
Remove the buttons from their socket. It is recommended to use
|
||||
tweezers.
|
||||
|
||||
### **STEP 10 - Teardown complete** {.step-title}
|
||||
|
||||
{.step-thumb}
|
||||
{.step-thumb}
|
||||
|
||||
Good job the teardown is complete.
|
||||
Good job the teardown is complete!
|
||||
|
||||
### **STEP 11 - Reassembly** {.step-title}
|
||||
|
||||
@@ -117,10 +141,10 @@ putting the circuit board back in the case, like in the pictures.
|
||||
Reassemble the console by following the previous steps in reverse order.
|
||||
|
||||
!!! warning
|
||||
|
||||
Be careful not to damage the switches on the circuit board when
|
||||
putting back the L/R plastic buttons.
|
||||
|
||||
|
||||
--8<--
|
||||
includes/glossary.md
|
||||
--8<--
|
||||
--8<--
|
||||
|
||||
Reference in New Issue
Block a user