godzil/emu51
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
fa75493e0ca08a8ebdd7d0eee4635e9409684d48
emu51/asm_man.txt
Godzil 3d6cb8ac9e First Commit
2013-12-17 00:25:22 +00:00

6056 lines
232 KiB
Plaintext
Executable File
Raw Blame History

This file contains invisible Unicode characters
This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
8051 CROSS ASSEMBLER
USER'S MANUAL
MetaLink Corporation
Chandler, Arizona
MetaLink Corporation
P.O. BOX 1329
Chandler, Arizona 85244-1329
(602) 926-0797
TELEX: 4998050 MTLNK
FAX: (602) 926-1198
PURCHASE TERMS AND CONDITIONS
Since MetaLink Corporation does business and is located solely in
the State of Arizona, such orders or agreements and the rights of
the parties hereunder shall be governed by the laws of the State
of Arizona.
PAYMENTS TERMS:
Unless otherwise agreed upon, the TOTAL UNPAID BALANCE is due and
payable 30 days following the invoice date.
LIMITED WARRANTY: METALINK MAKES NO WARRANTIES OTHER THAN THOSE
CONTAINED HEREIN AND METALINK EXPRESSLY DISCLAIMS ANY AND ALL
IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE OR OF MERCHANTABILITY.
The foregoing limited warranty shall not apply unless Buyer has
paid for in full the MetaLink products. Updates to the MetaLink
Assembler User's Manual and MetaLink Assembler software are
available free to Registered Buyer upon request for a one (1) year
period from the invoice date.
NOTICE
MetaLink Corp. reserves the right to make improvements in the
software product described in this manual as well as the manual
itself at any time and without notice.
DISCLAIMER OF ALL WARRANTIES AND LIABILITY
METALINK CORP. MAKES NO WARRANTIES, EITHER EXPRESSED OR IMPLIED,
WITH RESPECT TO THIS MANUAL OR WITH RESPECT TO THE SOFTWARE
DESCRIBED IN THIS MANUAL, ITS QUALITY, PERFORMANCE, MERCHANTABILITY,
OR FITNESS FOR ANY PARTICULAR PURPOSE. METALINK CORP. SOFTWARE
IS SOLD OR LICENSED "AS IS". IN NO EVENT SHALL METALINK CORP. BE
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY
DEFECT IN THE SOFTWARE.
Copyright (c) 1984, 1985, 1986, 1987, 1988, 1989 by MetaLink Corp.
All rights are reserved. This manual may not, in whole or part,
be copied, photocopied, reproduced, translated, or reduced to any
electronic medium or machine readable form without the prior
agreement and written permission of MetaLink Corp.
MS-DOS is a trademark of Microsoft, Inc.
IBMR is a registered trademark of IBM Corp.
IntelR is a registered trademark of Intel Corp.
MetaLink is a trademark of MetaLink Corp.
T A B L E O F C O N T E N T S
1. 8051 OVERVIEW............................................1-1
1.1. Introduction........................................1-1
1.2. 8051 Architecture...................................1-2
1.3. Summary of the 8051 Family of Components............1-4
1.4. References..........................................1-5
2. 8051 CROSS ASSEMBLER OVERVIEW............................2-1
2.1. Introduction........................................2-1
2.2. Symbols.............................................2-1
2.3. Labels..............................................2-2
2.4. Assembler Controls..................................2-3
2.5. Assembler Directives................................2-3
2.6. 8051 Instruction Mnemonics..........................2-4
2.7. Bit Addressing......................................2-6
2.8. ASCII Literals......................................2-6
2.9. Comments............................................2-6
2.10. The Location Counter...............................2-7
2.11. Syntax Summary.....................................2-7
2.12. Numbers and Operators..............................2-7
2.13. Source File Listing...............................2-10
2.14. Object File.......................................2-11
3. RUNNING THE 8051 CROSS ASSEMBLER.........................3-1
3.1. Cross Assembler Files...............................3-1
3.2. Minimum System Requirements.........................3-1
3.3. Running the Cross Assembler.........................3-1
3.4. Example Running the Cross Assembler.................3-3
3.5. DOS Hints and Suggestions...........................3-3
3.6. References..........................................3-4
4. 8051 INSTRUCTION SET.....................................4-1
4.1. Notation............................................4-1
4.2. 8051 Instruction Set Summary........................4-4
4.3. Notes..............................................4-14
4.4. References.........................................4-14
5. 8051 CROSS ASSEMBLER DIRECTIVES..........................5-1
5.1. Introduction........................................5-1
5.2. Symbol Definition Directives........................5-1
5.3. Segment Selection Directives........................5-4
5.4. Memory Reservation and Storage Directives...........5-5
5.5. Miscellaneous Directives............................5-7
5.6. Conditional Assembly Directives.....................5-8
6. 8051 CROSS ASSEMBLER CONTROLS............................6-1
6.1. Introduction........................................6-1
6.2. Assembler Control Descriptions......................6-1
7. 8051 CROSS ASSEMBLER MACRO PROCESSOR.....................7-1
7.1. Introduction........................................7-1
7.2. Macro Definition....................................7-1
7.3. Special Macro Operators.............................7-4
7.4. Using Macros........................................7-4
7.4.1. NESTING MACROS...............................7-4
7.4.2. LABELS IN MACROS.............................7-6
8. 8051 CROSS ASSEMBLER ERROR CODES.........................8-1
8.1. Introduction........................................8-1
8.2. Explanation of Error Messages.......................8-2
Appendices
A. SAMPLE PROGRAM AND LISTING...............................A-1
A.1. Source File.........................................A-1
A.2. Source File Listing.................................A-4
B. PRE-DEFINED BYTE AND BIT ADDRESSES.......................B-1
B.1. Pre-defined Byte Addresses..........................B-1
B.2. Pre-defined Bit Addresses..........................B-11
C. RESERVED SYMBOLS.........................................C-1
D. CROSS ASSEMBLER CHARACTER SET............................D-1
CHAPTER 1
8051 OVERVIEW
1.1. Introduction
For new users of MetaLink's ASM51 Cross Assembler, please take a
moment to fill out and return postage-prepaid User Registration
Card. This card will be found with the system diskette in the
vinyl jacket at the front of this manual. MetaLink will use this
information to send out, free of charge, any software updates
occurring during the warranty period. Respondents will also be
notified of any new products or product enhancements.
The 8051 series of microcontrollers are highly integrated single
chip microcomputers with an 8-bit CPU, memory, interrupt
controller, timers, serial I/O and digital I/O on a single piece
of silicon. The current members of the 8051 family of components
include:
80C152JA/JB/JC/JD, 83C152JA/JC, 80C157
80C154, 83C154, 85C154
8044, 8344, 8744
80C451, 83C451, 87C451
80C452, 83C452, 87C452
8051, 8031, 8751, 80C51, 80C31, 87C51
80512, 80532
80515, 80535, 80C535, 80C515
80C517, 80C537
80C51FA, 83C51FA, 87C51FA, 83C51FB, 87C51FB, 83C51FC, 87C51FC
8052, 8032, 8752
80C321, 80C521, 87C521, 80C541, 87C541
8053, 9761, 8753
80C552, 83C552, 87C552
80C652, 83C652, 87C652
83C654, 87C654
83C751, 87C751
83C752, 87C752
80C851, 83C851
All members of the 8051 series of microcontrollers share a common
architecture. They all have the same instruction set, addressing
modes, addressing range and memory spaces. The primary
differences between different 8051 based products are the amount
of memory on chip, the amount and types of I/O and peripheral
functions, and the component's technology (see Table 1-1).
In the brief summary of the 8051 architecture that follows, the
term 8051 is used to mean collectively all available members of
the 8051 family. Please refer to reference (1) for a complete
description of the 8051 architecture and the specifications for
all the currently available 8051 based products.
1-1
1.2. 8051 Architecture
The 8051 is an 8-bit machine. Its memory is organized in bytes
and practically all its instruction deal with byte quantities.
It uses an Accumulator as the primary register for instruction
results. Other operands can be accessed using one of the four
different addressing modes available: register implicit, direct,
indirect or immediate. Operands reside in one of the five memory
spaces of the 8051.
The five memory spaces of the 8051 are: Program Memory, External
Data Memory, Internal Data Memory, Special Function Registers and
Bit Memory.
The Program Memory space contains all the instructions, immediate
data and constant tables and strings. It is principally
addressed by the 16-bit Program Counter (PC), but it can also be
accessed by a few instructions using the 16-bit Data Pointer
(DPTR). The maximum size of the Program Memory space is 64K
bytes. Several 8051 family members integrate on-chip some amount
of either masked programmed ROM or EPROM as part of this memory
space (refer to Table 1-1).
The External Data Memory space contains all the variables,
buffers and data structures that can't fit on-chip. It is
principally addressed by the 16-bit Data Pointer (DPTR), although
the first two general purpose register (R0,R1) of the currently
selected register bank can access a 256-byte bank of External
Data Memory. The maximum size of the External Data Memory space
is 64Kbytes. External data memory can only be accessed using
the indirect addressing mode with the DPTR, R0 or R1.
The Internal Data Memory space is functionally the most important
data memory space. In it resides up to four banks of general
purpose registers, the program stack, 128 bits of the 256-bit
memory, and all the variables and data structures that are
operated on directly by the program. The maximum size of the
Internal Data Memory space is 256-bytes. However, different
8051 family members integrate different amounts of this memory
space on chip (see Amnt of RAM in Table 1-1). The register
implicit, indirect and direct addressing modes can be used in
different parts of the Internal Data Memory space.
The Special Function Register space contains all the on-chip
peripheral I/O registers as well as particular registers that
need program access. These registers include the Stack Pointer,
the PSW and the Accumulator. The maximum number of Special
Function Registers (SFRs) is 128, though the actual number on a
particular 8051 family member depends on the number and type of
peripheral functions integrated on-chip (see Table 1-1). The
SFRs all have addresses greater than 127 and overlap the address
space of the upper 128 bytes of the Internal Data Memory space.
The two memory spaces are differentiated by addressing mode. The
SFRs can only be accessed using the Direct addressing mode while
the upper 128 bytes of the Internal Data Memory (if integrated
on-chip) can only be accessed using the Indirect addressing mode.
1-2
The Bit Memory space is used for storing bit variables and flags.
There are specific instructions in the 8051 that operate only in
the Bit Memory space. The maximum size of the Bit Memory space
is 256-bits. 128 of the bits overlap with 16-bytes of the
Internal Data Memory space and 128 of the bits overlap with 16
Special Function Registers. Bits can only be accessed using the
bit instructions and the Direct addressing mode.
The 8051 has a fairly complete set of arithmetic and logical
instructions. It includes an 8X8 multiply and an 8/8 divide.
The 8051 is particularly good at processing bits (sometimes
called Boolean Processing). Using the Carry Flag in the PSW as a
single bit accumulator, the 8051 can move and do logical
operations between the Bit Memory space and the Carry Flag. Bits
in the Bit Memory space can also be used as general purpose flags
for the test bit and jump instructions.
1-3
Except for the MOVE instruction, the 8051 instructions can only
operate on either the Internal Data Memory space or the Special
Function Registers. The MOVE instruction operates in all memory
spaces, including the External Memory space and Program Memory
space.
Program control instructions include the usual unconditional
calls and jumps as well as conditional relative jumps based on
the Carry Flag, the Accumulator's zero state, and the state of
any bit in the Bit Memory space. Also available is a Compare and
Jump if Not Equal instruction and a Decrement Counter and Jump if
Not Zero loop instruction. See Chapter 4 for a description of
the complete 8051 instruction set.
1.3. Summary of the 8051 Family of Components
1-4
Table 1-1: 8051 Family of Components
1.4. References
1. Intel Corp., 8-Bit Embedded Controllers, 1990.
2. Siemens Corp., Microcontroller Component 80515, 1985.
3. AMD Corp., Eight-Bit 80C51 Embedded Processors, 1990.
4. Signetics Corp., Microcontroller Users' Guide, 1989.
1-5
CHAPTER 2
8051 CROSS ASSEMBLER OVERVIEW
2.1. Introduction
The 8051 Cross Assembler takes an assembly language source file
created with a text editor and translates it into a machine
language object file. This translation process is done in two
passes over the source file. During the first pass, the Cross
Assembler builds a symbol table from the symbols and labels used
in the source file. It's during the second pass that the Cross
Assembler actually translates the source file into the machine
language object file. It is also during the second pass that the
listing is generated.
The following is a discussion of the syntax required by the Cross
Assembler to generate error free assemblies.
2.2. Symbols
Symbols are alphanumeric representations of numeric constants,
addresses, macros, etc. The legal character set for symbols is
the set of letters, both upper and lower case (A..Z,a..z), the
set of decimal numbers (0..9) and the special characters,
question mark (?) and underscore (_). To ensure that the Cross
Assembler can distinguish between a symbol and a number, all
symbols must start with either a letter or special character (?
or _). The following are examples of legal symbols:
PI
Serial_Port_Buffer
LOC_4096
?_?_?
In using a symbol, the Cross Assembler converts all letters to
upper case. As a result, the Cross Assembler makes no distinction
between upper and lower case letters. For example, the following
two symbols would be seen as the same symbol by the Cross
Assembler:
Serial_Port_Buffer
SERIAL_PORT_BUFFER
Symbols can be defined only once. Symbols can be up to 255
characters in length, though only the first 32 are significant.
Therefore, for symbols to be unique, they must have a unique
character pattern within the first 32 characters. In the
following example, the first two symbols would be seen by the
Cross Assembler as duplicate symbols, while the third and fourth
2-1
symbols are unique.
BEGINNING_ADDRESS_OF_CONSTANT_TABLE_1
BEGINNING_ADDRESS_OF_CONSTANT_TABLE_2
CONSTANT_TABLE_1_BEGINNING_ADDRESS
CONSTANT_TABLE_2_BEGINNING_ADDRESS
There are certain symbols that are reserved and can't be defined
by the user. These reserved symbols are listed in Appendix C and
include the assembler directives, the 8051 instruction mnemonics,
implicit operand symbols, and the following assembly time
operators that have alphanumeric symbols: EQ, NE, GT, GE, LT, LE,
HIGH, LOW, MOD, SHR, SHL, NOT,
AND, OR and XOR.
The reserved implicit operands include the symbols A, AB, C,
DPTR, PC, R0, R1, R2, R3, R4, R5, R6, R7, AR0, AR1, AR2, AR3,
AR4, AR5, AR6 and AR7. These symbols are used primarily as
instruction operands. Except for AB, C, DPTR or PC, these
symbols can also be used to define other symbols (see EQU
directive in Chapter 5).
The following are examples of illegal symbols with an explanation
of why they are illegal:
1ST_VARIABLE (Symbols can not start with a number.)
ALPHA# (Illegal character "#" in symbol.)
MOV (8051 instruction mnemonic)
LOW (Assembly operator)
DATA (Assembly directive)
2.3. Labels
Labels are special cases of symbols. Labels are used only before
statements that have physical addresses associated with them.
Examples of such statements are assembly language instructions,
data storage directives (DB and DW), and data reservation
directives (DS and DBIT). Labels must follow all the rules of
symbol creation with the additional requirement that they be
followed by a colon. The following are legal examples of label
uses:
TABLE_OF_CONTROL_CONSTANTS:
DB 0,1,2,3,4,5 (Data storage)
MESSAGE: DB 'HELP' (Data storage)
VARIABLES: DS 10 (Data reservation)
BIT_VARIABLES: DBIT 16 (Data reservation)
START: MOV A,#23 (Assembly language instruction)
2.4. Assembler Controls
2-2
Assembler controls are used to control where the Cross Assembler
gets its input source file, where it puts the object file, and
how it formats the listing file. Table 2-1 summarizes the
assembler controls available. Refer to Chapter 6 for a detailed
explanation of the controls.
Table 2-1: Summary of Cross Assembler Controls
As can be seen in Table 2-1, all assembler controls are prefaced
with a dollar sign ($). No spaces or tabs are allowed between the
dollar sign and the body of the control. Also, only one control
per line is permitted. However, comments can be on the same line
as a control. The following are examples of assembler controls:
$TITLE(8051 Program Ver. 1.0)
$LIST
$PAGEWIDTH(132)
2.5. Assembler Directives
Assembler directives are used to define symbols, reserve memory
space, store values in program memory and switch between
different memory spaces. There are also directives that set the
location counter for the active segment and identify the end of
the source file. Table 2-2 summarizes the assembler directives
available. These directives are fully explained in Chapter 5.
Table 2-2: Summary of Cross Assembler Directives
Only one directive per line is allowed, however comments may be
2-3
included. The following are examples of assembler directives:
TEN EQU 10
RESET CODE 0
ORG 4096
2.6. 8051 Instruction Mnemonics
The standard 8051 Assembly Language Instruction mnemonics plus
the generic CALL and JMP instructions are recognized by the Cross
Assembler and are summarized in Table 2-3. See Chapter 4 for the
operation of the individual instructions.
2-4
Table 2-3: 8051 Instructions and Mnemonics
When the Cross Assembler sees a generic CALL or JMP instruction,
it will try to translate the instruction into its most byte
efficient form. The Cross Assembler will translate a CALL into
one of two instructions (ACALL or LCALL) and it will translate a
generic JMP into one of three instructions (SJMP, AJMP or LJMP).
The choice of instructions is based on which one is most byte
efficient. The generic CALL or JMP instructions saves the
programmer the trouble of determining which form is best.
However, generic CALLs and JMPs do have their limitations. While
the byte efficiency algorithm works well for previously defined
locations, when the target location of the CALL or JMP is a forward
location (a location later on in the program), the assembler has no
way of determining the best form of the instruction. In this case
the Cross Assembler simply puts in the long version (LCALL or LJMP)
of the instruction, which may not be the most byte efficient. NOTE
that the generic CALLs and JMPs must not be used for the 751/752
device as LCALL and LJMP are not legal instructions for those
devices. Instead use ACALL and AJMP explicitly.
For instructions that have operands, the operands must be
separated from the mnemonic by at least one space or tab. For
instructions that have multiple operands, each operand must be
separated from the others by a comma.
Two addressing modes require the operands to be preceded by
special symbols to designate the addressing mode. The AT sign
(@) is used to designate the indirect addressing mode. It is
used primarily with Register 0 and Register 1 (R0, R1), but is
can also be used with the DPTR in the MOVX and the Accumulator in
MOVC and JMP @A+DPTR instructions. The POUND sign (#) is used to
designate an immediate operand. It can be used to preface
either a number or a symbol representing a number.
A third symbol used with the operands actually specifies an
operation. The SLASH (/) is used to specify that the contents of
a particular bit address is to be complemented before the
2-5
instruction operation. This is used with the ANL and ORL bit
instructions.
Only one assembly language instruction is allowed per line.
Comments are allowed on the same line as an instruction, but only
after all operands have been specified. The following are
examples of instruction statements:
START: LJMP INIT
MOV @R0,Serial_Port_Buffer
CJNE R0 , #TEN, INC_TEN
ANL C,/START_FLAG
CALL GET_BYTE
RET
2.7. Bit Addressing
The period (.) has special meaning to the Cross Assembler when
used in a symbol. It is used to explicitly specify a bit in a
bit-addressable symbol. For example, it you wanted to specify
the most significant bit in the Accumulator, you could write
ACC.7, where ACC was previously defined as the Accumulator
address. The same bit can also be selected using the physical
address of the byte it's in. For example, the Accumulator's
physical address is 224. The most significant bit of the
Accumulator can be selected by specifying 224.7. If the symbol
ON was defined to be equal to the value 7, you could also specify
the same bit by either ACC.ON or 224.ON.
2.8. ASCII Literals
Printable characters from the ASCII character set can be used
directly as an immediate operand, or they can used to define
symbols or store ASCII bytes in Program Memory. Such use of the
ASCII character set is called ASCII literals. ASCII literals are
identified by the apostrophe (') delimiter. The apostrophe
itself can be used as an ASCII literal. In this case, use two
apostrophes in a row. Below are examples of using ASCII
literals.
MOV A,#'m' ;Load A with 06DH (ASCII m)
QUOTE EQU '''' ;QUOTE defined as 27H (ASCII single quote)
DB '8051' ;Store in Program Memory
2.9. Comments
Comments are user defined character strings that are not
processed by the Cross Assembler. A comment begins with a
semicolon ( ; ) and ends at the carriage return/line feed pair
that terminates the line. A comment can appear anywhere in a
line, but it has to be the last field. The following are
examples of comment lines:
2-6
; Begin initialization routine here
$TITLE(8051 Program Vers. 1.0) ;Place version number here
TEN EQU 10 ;Constant
; Comment can begin anywhere in a line
MOV A,Serial_Port_Buffer ; Get character
2.10. The Location Counter
The Cross Assembler keeps a location counter for each of the five
segments (code, internal data, external data, indirect internal
data and bit data). Each location counter is initialized to zero
and can be modified using Assembler Directives described in
Chapter 5.
The dollar sign ($) can be used to specify the current value of
the location counter of the active segment. The following are
examples of how this can be used:
JNB FLAG,$ ;Jump on self until flag is reset
CPYRGHT: DB 'Copyright, 1983'
CPYRGHT_LENGTH
EQU $-CPYRGHT-1 ;Calculate length of copyright message
2.11. Syntax Summary
Since the Cross Assembler essentially translates the source file
on a line by line basis, certain rules must be followed to ensure
the translation process is done correctly. First of all, since
the Cross Assembler's line buffer is 256 characters deep, there
must always be a carriage return/line feed pair within the first
256 columns of the line.
A legal source file line must begin with either a control, a
symbol, a label, an instruction mnemonic, a directive, a comment
or it can be null (just the carriage return/line feed pair). Any
other beginning to a line will be flagged as an error.
While a legal source file line must begin with one of the above
items, the item doesn't have to begin in the first column of the
line. It only must be the first field of the line. Any number
(including zero) of spaces or tabs, up to the maximum line size,
may precede it.
Comments can be placed anywhere, but they must be the last field
in any line.
2.12. Numbers and Operators
The Cross Assembler accepts numbers in any one of four radices:
binary, octal, decimal and hexadecimal. To specify a number in a
specific radix, the number must use the correct digits for the
particular radix and immediately following the number with its
2-7
radix designator. Decimal is the default radix and the use of
its designator is optional. An hexadecimal number that would
begin with a letter digit must be preceded by a 0 (zero) to
distinguish it from a symbol. The internal representation of
numbers is 16-bits, which limits the maximum number possible.
Table 2-4 summarizes the radices available.
MAXIMUM LEGAL
RADIX DESIGNATOR LEGAL DIGITS NUMBER
----------- ---------- ------------ -----------------
Binary B 0,1 1111111111111111B
Octal O,Q 0,1,2,3,4,5, 177777O
6,7 177777Q
Decimal D,(default) 0,1,2,3,4,5, 65535D
6,7,8,9 65535
Hexadecimal H 0,1,2,3,4,5, 0FFFFH
6,7,8,9,A,B,
C,D,E,F
Table 2-4: Cross Assembler Radices
No spaces or tabs are allowed between the number and the radix
designator. The letter digits and radix designators can be in
upper or lower case. The following examples list the decimal
number 2957 in each of the available radices:
101110001101B (Binary)
5615o or 5615Q (Octal)
2957 or 2957D (Decimal)
0B8DH, 0b8dh (Hexadecimal)
When using radices with explicit bit symbols, the radix
designator follows the byte portion of the address as shown in
the following examples:
0E0H.7 Bit seven of hexadecimal address 0E0
200Q.ON Bit ON of octal address 200
The Cross Assembler also allows assembly time evaluation of
arithmetic expressions up to thirty-two levels of embedded
parentheses. All calculations use integer numbers and are done
in sixteen bit precision.
OPERATOR SYMBOL OPERATION
--------------- ------------------------
+ Addition
Unary positive
- Subtraction
Unary negation (2's complement)
* Multiplication
/ Integer division (no remainder)
MOD Modulus (remainder of integer division)
SHR Shift right
SHL Shift left
2-8
NOT Logical negation (1's complement)
AND Logical and
OR Inclusive or
XOR Exclusive or
LOW Low order 8-bits
HIGH High order 8-bits
EQ, = Relational equal
NE, <> Relational not equal
GT, > Relational greater than
GE, >= Relational greater than or equal
LT, < Relational less than
LE, <= Relational less than or equal
( ) Parenthetical statement
Table 2-5: Assembly Time Operations
The relational operators test the specified values and return
either a True or False. False is represented by a zero value,
True is represented by a non zero value (the True condition
actually returns a 16-bit value with every bit set; i.e.,
0FFFFH). The relational operators are used primarily with the
Conditional Assembly capability of the Cross Assembler.
Table 2-5 lists the operations available while Table 2-6 lists
the operations precedence in descending order. Operations with
higher precedence are done first. Operations with equal
precedence are evaluated from left to right.
OPERATION PRECEDENCE
--------- ----------
(,) HIGHEST
HIGH,LOW
*,/,MOD,SHR,SHL
+,-
EQ,LT,GT,LE,GE,NE,=,<,>,<=,>=,<>
NOT
AND
OR,XOR LOWEST
Table 2-6: Operators Precedence
The following are examples of all the available operations and
their result:
HIGH(0AADDH) will return a result of 0AAH
LOW(0AADDH) will return a result of 0DDH
7*4 will return a result of 28
7/4 will return a result of 1
7 MOD 4 will return a result of 3
1000B SHR 2 will return a result of 0010B
1010B SHL 2 will return a result of 101000B
10+5 will return a result of 15
+72 will return a result of 72
25-17 will return a result of 8
2-9
-1 will return a result of 1111111111111111B
NOT 1 will return a result of 1111111111111110B
7 EQ 4, 7 = 4 will return a result of 0
7 LT 4, 7 < 4 will return a result of 0
7 GT 4, 7 > 4 will return a result of 0FFFFH
7 LE 4, 7 <= 4 will return a result of 0
7 GE 4, 7 >= 4 will return a result of 0FFFFH
7 NE 4, 7 <> 4 will return a result of 0FFFFH
1101B AND 0101B will return a result of 0101B
1101B OR 0101B will return a result of 1101B
1101B XOR 0101B will return a result of 1000B
2.13. Source File Listing
The source file listing displays the results of the Cross
Assembler translation. Every line of the listing includes a copy
of the original source line as well as a line number and the
Cross Assembler translation.
For example, in translating the following line taken from the
middle of a source file:
TRANS: MOV R7,#32 ;Set up pointer
the listing will print:
002F 7920 152 TRANS: MOV R1,#32 ;Set up pointer
The '002F' is the current value of the location counter in
hexadecimal. The '7920' is the translated instruction, also in
hexadecimal. The '152' is the decimal line number of the current
assembly. After the line number is a copy of the source file
line that was translated.
Another example of a line in the listing file is as follows:
015B 13 =1 267 +2 RRC A
Here we see two additional fields. The '=1' before the line
number gives the current nesting of include files. The '+2'
after the line number gives the current macro nesting. This line
essentially says that this line comes from a second level nesting
of a macro that is part of an include file.
Another line format that is used in the listing is that of symbol
definition. In this case the location counter value and
translated instruction fields described above are replaced with
the definition of the symbol. The following are examples of
this:
00FF 67 MAX_NUM EQU 255
REG 68 COUNTER EQU R7
The '00FF' is the hexadecimal value of the symbol MAX_NUM.
Again, '67'is the decimal line number of the source file and the
2-10
remainder of the first line is a copy of the source file. In the
second line above, the 'REG' shows that the symbol COUNTER was
defined to be a general purpose register.
Optionally, a listing can have a page header that includes the
name of the file being assembled, title of program, date and page
number. The header and its fields are controlled by specific
Assembler Controls (see Chapter 6).
The default case is for a listing to be output as a file on the
default drive with the same name as the entered source file and
an extension of .LST. For example, if the source file name was
PROGRAM.ASM, the listing file would be called PROGRAM.LST. Or if
the source file was called MODULE1, the listing file would be
stored as MODULE1.LST. The default can be changed using the
$NOPRINT and $PRINT() Assembler Controls (see Chapter 6).
2.14. Object File
The 8051 Cross Assembler also creates a machine language object
file. The format of the object file is standard Intel
Hexadecimal. This Hexadeciaml file can be used to either program
EPROMs using standard PROM Programmers for prototyping, or used
to pattern masked ROMs for production.
The default case is for the object file to be output on the
default drive with the same name as the first source file and an
extension of .HEX. For example, if the source file name was
PROGRAM.ASM, the object file would be called PROGRAM.HEX. Or if
the source file was called MODULE1, the object file would be
stored as MODULE1.HEX. The default can be changed using the
$NOOBJECT and $OBJECT() Assembler Controls (see Chapter 6).
2-11
CHAPTER 3
RUNNING THE 8051 CROSS ASSEMBLER ON PC-DOS/MS-DOS SYSTEMS
3.1. Cross Assembler Files
The floppy disk you receive with this manual is an 8 sector,
single-sided, double density disk. This distribution disk will
contain the following files:
ASM51.EXE The Cross Assembler program itself
MOD152 Source file for the $MOD152 control
MOD154 Source file for the $MOD154 control
MOD252 Source file for the $MOD252 control
MOD44 Source file for the $MOD44 control
MOD451 Source file for the $MOD451 control
MOD452 Source file for the $MOD452 control
MOD51 Source file for the $MOD51 control
MOD512 Source file for the $MOD512 control
MOD515 Source file for the $MOD515 control
MOD517 Source file for the $MOD517 control
MOD52 Source file for the $MOD52 control
MOD521 Source file for the $MOD521 control
MOD552 Source file for the $MOD552 control
MOD652 Source file for the $MOD652 control
MOD751 Source file for the $MOD751 control
MOD752 Source file for the $MOD752 control
MOD851 Source file for the $MOD851 control
There will also be one or more files with an extension of .ASM.
These are sample programs. Listings of these programs can be
found in Appendix A.
DON'T USE THE DISTRIBUTION DISK. MAKE WORKING AND BACKUP COPIES
FROM THE DISTRIBUTION DISK AND THEN STORE THE DISTRIBUTION DISK
IN A SAFE PLACE.
3.2. Minimum System Requirements
With DOS 2.0 or later - 96K RAM
1 Floppy Disk Drive
3.3. Running the Cross Assembler
Once you've created an 8051 assembly language source text file in
accordance with the guidelines in Chapter 2, you are now ready to
run the Cross Assembler. Make sure your system is booted and the
DOS prompt ( A> ) appears on the screen. Place the disk with the
8051 Cross Assembler on it in the drive and simply type (in all
the following examples, the symbol <CR> is used to show where the
3-1
ENTER key was hit):
ASM51<CR>
If the 8051 Cross Assembler disk was placed in a drive other than
the default drive, the drive name would have to be typed first.
For example, if the A drive is the default drive, and the 8051
Cross Assembler is in the B drive, you would then type:
B:ASM51<CR>
After loading the program from the disk, the program's name, its
version number and general copyright information will be dis-
played on the screen. The Cross Assembler then asks for the
source file name to begin the assembly process.
Source file drive and name [.ASM]:
At this point, if you have only one floppy disk drive and the
8051 Cross Assembler and source files are on separate disks,
remove the disk with the 8051 Cross Assembler on it and replace
it with your source file disk.
Next, enter the source file name. If no extension is given, the
Cross Assembler will assume an extension of .ASM. If no drive is
given, the Cross Assembler will assume the default drive. Since
in every case where no drive is given, the Cross Assembler
assumes the default drive, it is generally a good practice to
change the default drive to the drive with your source files.
An alternative method for entering the source file is in the
command line. In this case, after typing in ASM51, type in a
space and the source file name (again if no extension is given,
source file on the command line:
A>ASM51 B:CONTROL.A51<CR>
After the source file name has been accepted, the Cross Assembler
will begin the translation process. As it starts the first pass
of its two pass process, it will print on the screen:
First pass
At the completion of the first pass, and as it starts its second
pass through the source file, the Cross Assembler will display:
Second pass
When second pass is completed, the translation process is done
and the Cross Assembler will print the following message:
ASSEMBLY COMPLETE, XX ERRORS FOUND
XX is replaced with the actual number of errors that were found.
Disk I/O may continue for a while as the Cross Assembler appends
3-2
the symbol table to the listing file.
3.4. Example Running the Cross Assembler
The following is an example of an actual run. The Cross
Assembler will take the source file SAMPLE.ASM from Drive A
(default drive).
Again, the symbol <CR> is used to show where the ENTER key was
hit.
A>ASM51<CR>
8 0 5 1 C R O S S A S S E M B L E R
Version 1.2
(c) Copyright 1984, 1985, 1986, 1987, 1988, 1989, 1990
MetaLink Corporation
Source file drive and name [.ASM]: sample<CR>
First pass
Second pass
ASSEMBLY COMPLETE, 0 ERRORS FOUND
3.5. DOS Hints and Suggestions
If you are using DOS 2.0 or later, you may want to use the BREAK
ON command before you run the Cross Assembler. This will allow
you to abort (Ctrl-Break) the Cross Assembler at any time.
Otherwise, you will only be able to abort the Cross Assembler
after it completes a pass through the source file. If you are
assembling a large file, this could cause you a several minute
wait before the Cross Assembler aborts.
The reason for this it that the default condition for DOS to
recognizes a Ctrl-Break is when the program (in this case the
Cross Assembler) does keyboard, screen or printer I/O.
Unfortunately, the assembler does this very rarely (once each
pass). By using the BREAK ON command, DOS will recognize a Ctrl-
Break for all I/O, including disk I/O. Since the Cross Assembler
is constantly doing disk I/O, with BREAK ON you can abort almost
immediately by hitting the Ctrl-Break keys.
3-3
So much for the good news. However, aborting a program can cause
some undesirable side-effects. Aborting a program while files
are open causes DOS to drop some information about the open
files. This results in disk sectors being allocated when they
are actually free. Your total available disk storage shrinks.
You should make the practice of running CHKDSK with the /F switch
periodically to recover these sectors.
The Cross Assembler run under DOS 2.0 or later supports
redirection. You can specify the redirection on the command line.
Use the following form:
ASM51 <infile >outfile
"infile" and "outfile" can be any legal file designator. The
Cross Assembler will take its input from the "infile" instead of
the keyboard and will send its output to "outfile" instead of the
screen.
Note that redirection of input in ASM51 is redundant since the
assembler is an absolute assembler and has no command line
options other than the file name argument.
Output redirection is useful for speeding up the assembly
process. Because assembly-time errors are directed to std_err in
DOS, an error listing cannot be redirected to a file
To make the .lst file serve as an error-only file, use the Cross
Assembler Controls $PRINT (create a list file) $NOLIST (turn the
listing off). Use the Cross Assembler Controls $NOSYMBOLS to
further compress the error-only listing resulting from the
manipulation of the list file controls. See Chapter 6 for more
information. The errors will be listed in the .lst file, as
usual.
If the control $NOPRINT (see Chapter 6) is active, all error
messages are send to the screen.
3.6. References
1. IBM Corp., Disk Operating System, Version 1.10, May 1982.
2. IBM Corp., Disk Operating System, Version 2.00, January 1983.
3-4
CHAPTER 4
8051 INSTRUCTION SET
4.1. Notation
Below is an explanation of the column headings and column
contents of the 8051 Instruction Set Summary Table that follows
in this chapter.
MNEMONIC
The MNEMONIC column contains the 8051 Instruction Set Mnemonic
and a brief description of the instruction's operation.
OPERATION
The OPERATION column describes the 8051 Instruction Set in unam-
biguous symbology. Following are the definitions of the symbols
used in this column.
<n:m> Bits of a register inclusive. For
example, PC<10:0> means bits 0 through 10
inclusive of the PC. Bit 0 is always the
least significant bit.
+ Binary addition
- Binary 2s complement subtraction
/ Unsigned integer division
X Unsigned integer multiplication
~ Binary complement (1s complement)
^ Logical And
v Inclusive Or
v Exclusive Or
> Greater than
<> Not equal to
= Equals
-> Is written into. For example, A + SOper -
> A means the result of the binary
addition between A and the Source Operand
is written into A.
A The 8-bit Accumulator Register.
AC The Auxiliary Carry Flag in the Program
Status Word
CF The Carry Flag in the Program Status Word
DOper The Destination Operand used in the
instruction.
DPTR 16-bit Data Pointer
Intrupt Active Flag Internal Flag that holds off interrupts
4-1
until the Flag is cleared.
Jump Relative to PC A Jump that can range between -128 bytes
and +127 bytes from the PC value of
the next instruction.
Paddr A 16-bit Program Memory address
PC The 8051 Program Counter. This 16-bit
register points to the byte in the
Program Memory space that is fetched as
part of the instruction stream.
PM(addr) Byte in Program Memory space pointed
to by addr.
Remainder Integer remainder of unsigned integer division
SOper The Source Operand used in the instruction.
SP 8-bit Stack Pointer
STACK The Last In First Out data structure that
is controlled by the 8-bit Stack
Pointer (SP). Sixteen bit quantities are
pushed on the stack low byte first.
DEST ADDR MODE/SOURCE ADDR MODE
These two columns specify the Destination and Source Addressing
Modes, respectively, that are available for each instruction.
AB The Accumulator-B Register pair.
Accumulator Operand resides in the accumulator
Bit Direct Operand is the state of the bit specified by the
Bit Memory address.
Carry Flag Operand is the state of the 1-bit Carry flag in
the Program Status Word (PSW).
Data Pointer Operand resides in the 16-bit Data Pointer
Register.
Direct Operand is the contents of the specified 8-bit
Internal Data Memory address from 0
(00H) to 127 (7FH) or a Special Function Register
address.
Indirect Operand is the contents of the address contained
in the register specified.
Immediate Operand is the next sequential byte after the
instruction in Program Memory space
Prog Direct 16-bit address in Program Memory Space.
Prog Indir Operand in Program Memory Space is the address
contained in the register specified.
Register Operand is the contents of the register specified.
Stack Operand is on the top of the Stack.
ASSEMBLY LANGUAGE FORM
This column contains the correct format of the instructions that
are recognized by the Cross Assembler.
A Accumulator
AB Accumulator-B Register pair.
4-2
C Carry Flag
Baddr Bit Memory Direct Address.
Daddr Internal Data Memory or Special Function Register
Direct Address.
data 8-bit constant data.
data16 16-bit constant data.
DPTR 16-bit Data Pointer Register.
PC 16-bit Program Counter.
Paddr 16-bit Program Memory address
Ri Indirect Register. R0 or R1 are the only indirect
registers.
Roff 8-bit offset for Relative Jump.
Rn Implicit Register. Each register bank has 8 general
purpose registers, designated R0, R1, R2, R3,
R4, R5, R6, R7.
HEX OPCODE
This column gives the machine language hexadecimal opcode for
each 8051 instruction.
BYT
This column gives the number of bytes in each 8051 instruction.
CYC
This column gives the number of cycles of each 8051 instruction.
The time value of a cycle is defined as 12 divided by the
oscillator frequency. For example, if running an 8051 family
component at 12 MHz, each cycle takes 1 microsecond.
PSW
This column identifies which condition code flags are affected by
the operation of the individual instructions. The condition code
flags available on the 8051 are the Carry Flag, CF, the Auxiliary
Carry Flag, AC, and the Overflow Flag, OV.
It should be noted that the PSW is both byte and bit directly
addressable. Should the PSW be the operand of an instruction
that modifies it, the condition codes could be changed even if
this column states that the instruction doesn't affect them.
0 Condition code is cleared
1 Condition code is set
* Condition code is modified by instruction
- Condition code is not affected by instruction
4.2. 8051 Instruction Set Summary
4-3
4-4
4-5
4-6
4-7
4-8
4-9
4-10
4-11
4-12
4.3. Notes
1 There are 8 possible opcodes. Starting with 11H as the
opcode base, the final opcode is formed by placing bits 8, 9 and
10 of the target address in bits 5, 6 and 7 of the opcode. The 8
possible opcodes in hexadecimal are then: 11, 31, 51, 71, 91, B1,
D1, F1.
2 There are 8 possible opcodes. Starting with 01H as
the opcode base, the final opcode is formed by placing bits 8, 9
and 10 of the target address in bits 5, 6 and 7 of the opcode.
The 8 possible opcodes in hexadecimal are then: 01, 21, 41, 61,
81, A1, C1, E1.
3 The Carry Flag is set if the Destination Operand is
less than the Source Operand. Otherwise the Carry Flag is
cleared.
4 The Carry Flag is set if the BCD result in the
Accumulator is greater than decimal 99.
5 The Overflow Flag is set if the B Register contains
zero (flags a divide by zero operation). Otherwise the Overflow
Flag is cleared.
6 If any of the condition code flags are specified as
the operand of this instruction, they will be reset by the
instruction if they were originally set.
7 The high byte of the 16-bit product is placed in the
B Register, the low byte in Accumulator.
4.4. References
1. Intel Corp., Microcontroller Handbook, 1984.
4-13
CHAPTER 5
8051 CROSS ASSEMBLER DIRECTIVES
5.1. Introduction
The 8051 Cross Assembler Directives are used to define symbols,
reserve memory space, store values in program memory, select
various memory spaces, set the current segment's location counter
and identify the end of the source file.
Only one directive per line is allowed, however comments may be
included. The remaining part of this chapter details the
function of each directive.
5.2. Symbol Definition Directives
EQU Directive
The EQUate directive is used to assign a value to a symbol. It
can also be used to specify user defined names for the implicit
operand symbols predefined for the Accumulator (i.e., A) and the
eight General Purpose Registers (i.e., R0 thru R7).
The format for the EQU directive is: symbol, followed by one or
more spaces or tabs, followed by EQU, followed by one or more
spaces or tabs, followed by a number, arithmetic expression,
previously defined symbol (no forward references allowed) or one
of the allowed implicit operand symbols (e.g., A, R0, R1, R2, R3,
R4, R5, R6, R7), followed by an optional comment.
Below are examples of using the EQU Directive:
TEN EQU 10 ;Symbol equated to a number
COUNTER EQU R7 ;User defined symbol for the implicit
;operand symbol R7. COUNTER can now
;be used wherever it is legal to use
;R7. For example the instruction
;INC R7 could now be written INC COUNTER.
ALSO_TEN EQU TEN ;Symbol equated to a previously defined
;symbol.
FIVE EQU TEN/2 ;Symbol equated to an arithmetic exp.
A_REG EQU A ;User defined symbol for the implicit
;operand symbol A.
ASCII_D EQU 'D' ;Symbol equated to an ASCII literal
SET Directive
Similar to the EQU directive, the SET directive is used to assign
a value or implicit operand to a user defined symbol. The
difference however, is that with the EQU directive, a symbol can
5-1
only be defined once. Any attempt to define the symbol again
will cause the Cross Assembler to flag it as an error. On the
other hand, with the SET directive, symbols are redefineable.
There is no limit to the number of times a symbol can be
redefined with the SET directive.
The format for the SET directive is: symbol, followed by one or
more spaces or tabs, followed by SET, followed by one or more
spaces or tabs, followed by a number, arithmetic expression,
previously defined symbol (no forward references allowed) or one
of the allowed implicit operand symbols (e.g., A, R0, R1, R2, R3,
R4, R5, R6, R7), followed by an optional comment.
Below are examples of using the SET Directive:
POINTER SET R0 ;Symbol equated to register 0
POINTER SET R1 ;POINTER redefined to register 1
COUNTER SET 1 ;Symbol initialized to 1
COUNTER SET COUNTER+1 ;An incrementing symbol
BIT Directive
The BIT Directive assigns an internal bit memory direct address
to the symbol. If the numeric value of the address is between 0
and 127 decimal, it is a bit address mapped in the Internal
Memory Space. If the numeric value of the address is between 128
and 255, it is an address of a bit located in one of the Special
Function Registers. Addresses greater than 255 are illegal and
will be flagged as an error.
The format for the BIT Directive is: symbol, followed by one or
more spaces or tabs, followed by BIT, followed by one or more
spaces or tabs, followed by a number, arithmetic expression, or
previously defined symbol (no forward references allowed),
followed by an optional comment.
Below are examples of using the BIT Directive:
CF BIT 0D7H ;The single bit Carry Flag in PSW
OFF_FLAG BIT 6 ;Memory address of single bit flag
ON_FLAG BIT OFF_FLAG+1 ;Next bit is another flag
CODE Directive
The CODE Directive assigns an address located in the Program
Memory Space to the symbol. The numeric value of the address
cannot exceed 65535.
The format for the CODE Directive is: symbol, followed by one or
more spaces or tabs, followed by CODE, followed by one or more
spaces or tabs, followed by a number, arithmetic expression, or
previously defined symbol (no forward references allowed),
followed by an optional comment.
5-2
Below are examples of using the CODE Directive:
RESET CODE 0
EXTI0 CODE RESET + (1024/16)
DATA Directive
The DATA Directive assigns a directly addressable internal memory
address to the symbol. If the numeric value of the address is
between 0 and 127 decimal, it is an address of an Internal Data
Memory location. If the numeric value of the address is between
128 and 255, it is an address of a Special Function Register.
Addresses greater than 255 are illegal and will be flagged as an
error.
The format for the DATA Directive is: symbol, followed by one or
more spaces or tabs, followed by DATA, followed by one or more
spaces or tabs, followed by a number, arithmetic expression, or
previously defined symbol (no forward references allowed),
followed by an optional comment.
Below are examples of using the DATA Directive:
PSW DATA 0D0H ;Defining the Program Status address
BUFFER DATA 32 ;Internal Data Memory address
FREE_SPAC DATA BUFFER+16 ;Arithmetic expression.
IDATA Directive
The IDATA Directive assigns an indirectly addressable internal
data memory address to the symbol. The numeric value of the
address can be between 0 and 255 decimal. Addresses greater than
255 are illegal and will be flagged as an error.
The format for the IDATA Directive is: symbol, followed by one or
more spaces or tabs, followed by IDATA, followed by one or more
spaces or tabs, followed by a number, arithmetic expression, or
previously defined symbol (no forward references allowed),
followed by an optional comment.
Below are examples of using the IDATA Directive:
TOKEN IDATA 60
BYTE_CNT IDATA TOKEN + 1
ADDR IDATA TOKEN + 2
XDATA Directive
The XDATA Directive assigns an address located in the External
Data Memory Space to the symbol. The numeric value of the
address cannot exceed 65535.
5-3
The format for the XDATA Directive is: symbol, followed by one or
more spaces or tabs, followed by XDATA, followed by one or more
spaces or tabs, followed by a number, arithmetic expression, or
previously defined symbol (no forward references allowed),
followed by an optional comment.
Below are examples of using the XDATA Directive:
USER_BASE XDATA 2048
HOST_BASE XDATA USER_BASE + 1000H
5.3. Segment Selection Directives
There are five Segment Selection Directives: CSEG, BSEG, DSEG,
ISEG, XSEG, one for each of the five memory spaces in the 8051
architecture. The CSEG Directive is used to select the Program
Memory Space. The BSEG Directive is used to select the Bit
Memory Space. The DSEG Directive is used to select the directly
addressable Internal Data Memory Space. The ISEG is used to
select the indirectly addressable Internal Data Memory Space.
The XSEG is used to select the External Data Memory Space.
Each segment has its own location counter that is reset to zero
during the Cross Assembler program initialization. The contents
of the location counter can be overridden by using the optional
AT after selecting the segment.
The Program Memory Space, or CSEG, is the default segment and is
selected when the Cross Assembler is run.
The format of the Segment Selection Directives are: zero or more
spaces or tabs, followed by the Segment Selection Directive,
followed by one or more spaces or tabs, followed by the optional
segment location counter override AT command and value, followed
by an optional comment.
The value of the AT command can be a number, arithmetic
expression or previously defined symbol (forward references are
not allowed). Care should be taken to ensure that the location
counter does not advance beyond the limit of the selected
segment.
Below are examples of the Segment Selection Directives:
DSEG ;Select direct data segment using
;current location counter value.
BSEG AT 32 ;Select bit data segment forcing
;location counter to 32 decimal.
XSEG AT (USER_BASE * 5) MOD 16 ;Arithmetic expressions can be
;used to specify location.
5.4. Memory Reservation and Storage Directives
5-4
DS Directive
The DS Directive is used to reserve space in the currently
selected segment in byte units. It can only be used when ISEG,
DSEG or XSEG are the currently active segments. The location
counter of the segment is advanced by the value of the directive.
Care should be taken to ensure that the location counter does not
advance beyond the limit of the segment.
The format for the DS Directive is: optional label, followed by
one or more spaces or tabs, followed by DS, followed by one or
more spaces or tabs, followed by a number, arithmetic expression,
or previously defined symbol (no forward references allowed),
followed by an optional comment.
Below is an example of using the DS Directive in the internal
Data Segment. If, for example, the Data Segment location counter
contained 48 decimal before the example below, it would contain
104 decimal after processing the example.
DSEG ;Select the data segment
DS 32 ;Label is optional
SP_BUFFER: DS 16 ;Reserve a buffer for the serial port
IO_BUFFER: DS 8 ;Reserve a buffer for the I/O
DBIT Directive
The DBIT Directive is used to reserve bits within the BIT
segment. It can only be used when BSEG is the active segment.
The location counter of the segment is advanced by the value of
the directive. Care should be taken to ensure that the location
counter does not advance beyond the limit of the segment.
The format for the DBIT Directive is: optional label, followed by
one or more spaces or tabs, followed by DBIT, followed by one or
more spaces or tabs, followed by a number, arithmetic expression,
or previously defined symbol (no forward references allowed),
followed by an optional comment.
Below is an example of using the DBIT Directive:
BSEG ;Select the bit segment
DBIT 16 ;Label is optional
IO_MAP: DBIT 32 ;Reserve a bit buffer for I/O
DB Directive
The DB Directive is used to store byte constants in the Program
Memory Space. It can only be used when CSEG is the active
segment.
The format for the DB Directive is: optional label, followed by
one or more spaces or tabs, followed by DB, followed by one or
more spaces or tabs, followed by the byte constants that are
5-5
separated by commas, followed by an optional comment.
The byte constants can be numbers, arithmetic expressions, symbol
values or ASCII literals. ASCII literals have to be delimited by
apostrophes ( ' ), but they can be strung together up to the
length of the line.
Below are examples of using the DB Directive. If an optional
label is used, its value will point to the first byte constant
listed.
COPYRGHT_MSG:
DB '(c) Copyright, 1984' ;ASCII Literal
RUNTIME_CONSTANTS:
DB 127,13,54,0,99 ;Table of constants
DB 17,32,239,163,49 ;Label is optional
MIXED: DB 2*8,'MPG',2*16,'abc' ;Can mix literals & no.
DW Directive
The DW Directive is used to store word constants in the Program
Memory Space. It can only be used when CSEG is the active
segment.
The format for the DW Directive is: optional label, followed by
one or more spaces or tabs, followed by DW, followed by one or
more spaces or tabs, followed by the word constants that are
separated by commas, followed by an optional comment.
The word constants can be numbers, arithmetic expressions, symbol
values or ASCII literals. ASCII literals must be delimited by
apostrophes ( ' ), but unlike the DB Directive, only a maximum of
two ASCII characters can be strung together. The first character
is placed in the high byte of the word and the second character
is placed in the low byte. If only one character is enclosed by
the apostrophes, a zero will be placed in the high byte of the
word.
Below are examples of using the DW Directive. If an optional
label is used, its value will point to the high byte of the first
word constant listed.
JUMP_TABLE: DW RESET,START,END ;Table of addresses
DW TEST,TRUE,FALSE ;Optional label
RADIX: DW 'H',1000H ;1st byte contains 0
;2nd byte contains 48H (H)
;3rd byte contains 10H
;4th byte contains 0
5.5. Miscellaneous Directives
ORG Directive
5-6
The ORG Directive is used to specify a value for the currently
active segment's location counter. It cannot be used to select
segments like the directives above. It can only be used within a
segment when the location counter needs to be changed. Care
should be taken to ensure that the location counter does not
advance beyond the limit of the selected segment.
The format of the ORG Directive is: zero or more spaces or tabs,
followed by ORG, followed by one or more spaces or tabs, followed
by a number, arithmetic expression, or previously defined symbol
(no forward references are allowed), followed by an optional
comment.
Below are examples of the ORG directive.
ORG 1000H ;Location counter set at 4096 decimal
ORG RESET ;Previously defined symbol
ORG BASE + MODULE_NO ;Arithmetic expression
USING DIRECTIVE
The USING Directive is used to specify which of the four General
Purpose Register banks is used in the code that follows the
directive. It allows the use of the predefined register symbols
AR0 thru AR7 instead of the register's direct addresses. It
should be noted that the actual register bank switching must
still be done in the code. This directive simplifies the direct
addressing of a specified register bank.
The format of the USING Directive is: zero or more spaces or
tabs, followed by USING, followed by one or more spaces or tabs,
followed by a number, arithmetic expression, or previously
defined symbol (no forward references are allowed), followed by
an optional comment.
The number, arithmetic expression, or previously defined symbol
must result in a number between 0 and 3 in order to specify one
of the four register banks in the 8051.
5-7
The following table maps the specified value in the USING
directive with the direct addresses of the predefined symbols.
Predefined | USING Value |
Symbol | 0 1 2 3 |
-----------------------------------------------
AR0 0 8 16 24
AR1 1 9 17 25
AR2 2 10 18 26
AR3 3 11 19 27
AR4 4 12 20 28
AR5 5 13 21 29
AR6 6 14 22 30
AR7 7 15 23 31
Below are examples of the USING Directive:
USING 0 ;Select addresses for Bank 0
USING 1+1+1 ;Arithmetic expressions
END Directive
The END Directive is used to signal the end of the source program
to the Cross Assembler. Every source program must have one and
only one END Directive. A missing END Directive, as well as text
beyond the occurrence of the END Directive are not allowed and
will be flagged as errors.
The format of the END Directive is: zero or more spaces or tabs,
followed by END, followed by an optional comment. All text must
appear in the source program before the occurrence of the END
Directive.
Below is an example of the END Directive:
END ;This is the End
5.6. Conditional Assembly Directives
IF, ELSE and ENDIF Directive
The IF, ELSE and ENDIF directives are used to define conditional
assembly blocks. A conditional assembly block begins with an IF
statement and must end with the ENDIF directive. In between the
IF statement and ENDIF directive can be any number of assembly
language statements, including directives, controls,
instructions, the ELSE directive and nested IF-ENDIF conditional
assembly blocks.
The IF statement starts with the keyword IF, followed by one or
more spaces or tabs, followed by a number, arithmetic expression,
or previously defined symbol (no forward references are allowed),
followed by an optional comment. The number, arithmetic
5-8
expression or symbol is evaluated and if found to be TRUE (non-
zero), the assembly language statements are translated up to the
next ELSE or ENDIF directives. If the IF statement was evaluated
FALSE (zero), the assembly language statements are considered
null up to the next ELSE or ENDIF directives.
If an optional ELSE appears in the conditional assembly block,
the assembly language statements following are handled oppositely
from the assembly language statements following the IF statement.
In other words, if the IF statement was evaluated TRUE, the
statements following it are translated, while the statements
following the ELSE will be handled as if they were null. On the
other hand, if the IF statement was evaluated FALSE, only the
assembly language statements following the ELSE directive would
be translated.
IF-ELSE-ENDIF conditional assembly blocks can be nested up to 255
levels deep. The following are some examples of conditional
assembly blocks. This first conditional assembly block simply
checks the symbol DEBUG. If DEBUG is non-zero, the MOV and CALL
instructions will be translated by the Cross Assembler.
IF (DEBUG)
MOV A,#25
CALL OUTPUT
ENDIF
The next example used the optional ELSE directive. If
SMALL_MODEL is zero, only the statements following the ELSE
directive will be translated.
IF (SMALL_MODEL)
MOV R0,#BUFFER
MOV A,@R0
ELSE
MOV R0,#EXT_BUFFER
MOVX A,@R0
ENDIF
The last example shows nested conditional assembly blocks.
Conditional assembly blocks can be nested up to 255 levels deep.
Every level of nesting must have balanced IF-ENDIF statements.
_
IF (VERSION > 10) \
CALL DOUBLE_PRECISION |
CALL UPDATE_STATUS _ |
IF (DEBUG) \ |
CALL DUMP_REGISTERS > Nested |
ENDIF _/ Block |
ELSE > Outer Block
CALL SINGLE_PRECISION |
CALL UPDATE_STATUS _ |
IF (DEBUG) \ |
CALL DUMP_REGISTERS > Nested |
ENDIF _/ Block |
ENDIF _/
5-9
CHAPTER 6
8051 CROSS ASSEMBLER CONTROLS
6.1. Introduction
Assembler controls are used to control where the Cross Assembler
gets its input source file, where it stores the object file, how
it formats and where it outputs the listing.
All Assembler controls are prefaced with a dollar sign, ($). No
spaces or tabs are allowed between the dollar sign and the body
of the control. Also, only one control per line is permitted.
Comments are allowed on the same line as an Assembler control.
There are two types of controls, Primary controls and General
controls. Primary controls can be invoked only once per
assembly. If an attempt is made to change a previously invoked
primary control, the attempt is ignored. For example, if
$NOPRINT is put on line 1 of the source file and $PRINT is put on
line 2, the $PRINT control will be ignored and the listing will
not be output. General controls can be invoked any number of
times in a source program.
There are two legal forms for each Assembler control, the full
form and the abbreviated form. The two forms can be used inter-
changeable in the source program.
Below is a description of each Assembler control. Assembler
controls with common functionality are grouped together.
6.2. Assembler Control Descriptions
$DATE(date)
Places the ASCII string enclosed by parenthesis in the date
field of the page header. The ASCII string can be from 0 to 9
characters long.
CONTROL: $DATE(date)
ABBREV: $DA(date)
TYPE: Primary
DEFAULT: No date in page header
EXAMPLES: $DATE(1-JUL-84)
$DA(7/22/84)
6-1
$DEBUG(file)
$NODEBUG
These controls determine whether or not a MetaLink Absolute
Object Module format file is created. The MetaLink Absolute
Object Module format file is used in conjunction with
MetaLink's MetaICE series of in-circuit-emulators. Among
other advantages, it provides powerful symbolic debug
capability in the emulator debug environment. $NODEBUG
specifies that a MetaLink Absolute Object Module file will not
be created. $DEBUG specifies that a MetaLink Absolute Object
Module file will be created. The $DEBUG control allows any
legal file name to be specified as the MetaLink Absolute
Object Module filename. If no filename is specified, a
default name is used. The default name used for the file is
the source file name root with a .DBG extension. If the
$DEBUG control is used, both a MetaLink Absolute Object Module
file and a standard Intel Hexadecimal format object file can
be generated at the same time. Refer to the $OBJECT control
description later in this chapter for information on
controlling the Hexadecimal format object file output.
CONTROL: $DEBUG(file)
$NODEBUG
ABBREV: $DB(file)
$NODB
DEFAULT: $NODEBUG
TYPE: Primary
EXAMPLES: $DB(A:NEWNAME.ICE)
$DEBUG
$NOOBJECT
$EJECT
Places a form feed (ASCII 0CH) in the listing output. The
$NOPAGING control will override this control.
CONTROL: $EJECT
ABBREV: $EJ
DEFAULT: No form feeds in listing output
TYPE: General
EXAMPLES: $EJECT
$EJ
$INCLUDE(file)
Inserts a file in source program as part of the input source
program. The file field in this control can be any legal file
designator. No extension is assumed, so the whole file name
must be specified. Any number of files can be included in a
source program. Includes can be nested up to 8 level deep. It
is important to note that this control inserts files, it does
not chain or concatenate files.
CONTROL: $INCLUDE(file)
ABBREV: $IC(file)
DEFAULT: No file included in source program
TYPE: General
EXAMPLES: $INCLUDE(B:COMMON.EQU
$IC(TABLES.ASM) ;Uses default drive
6-2
$LIST
$NOLIST
These controls determine whether or not the source program
listing is output or not. $LIST will allow the source program
listing to be output. $NOLIST stops the source program
listing from being output. The $NOPRINT control overrides the
$LIST control.
CONTROL: $LIST
$NOLIST
ABBREV: $LI
$NOLI
DEFAULT: $LIST
TYPE: General
EXAMPLES: $NOLIST ;This will cause the included
$INCLUDE(COMMON.TBL) ;file not to be listed
$LI ;Listing continues
$MOD51
$MOD52
$MOD44
$MOD515
$MOD512
$MOD517
$MOD152
$MOD451
$MOD452
$MOD751
$MOD752
$MOD154
$MOD252
$MOD521
$MOD552
$MOD652
$MOD851
$NOMOD
Recognizes predefined special function register symbols in the
source program. This saves the user from having to define all
the registers in the source program. Appendix B lists the
symbols that are defined by these controls. $NOMOD disables
the recognizing function. These controls access a files of
the same name that are included with the MetaLink 8051 CROSS
ASSEMBLER distribution diskette. When a $MOD control is used
in a source program, it is important that the $MOD file be
available to the Cross Assembler. The Cross Assembler first
looks for the $MOD file on the default drive, if it isn't
found there, the Cross Assembler looks for it on the A: drive.
The components supported by each switch are:
$MOD51: 8051, 8751, 8031, 80C51, 80C31, 87C51, 9761, 8053
$MOD52: 8052, 8032, 8752
$MOD44: 8044, 8344, 8744
$MOD515: 80515, 80535, 80C515, 80C535
$MOD512: 80512, 80532
$MOD517: 80C517, 80C537
6-3
$MOD152: 80C152, 83C152, 80C157
$MOD451: 80C451. 83C451, 87C451
$MOD452: 80C452, 83C452, 87C452
$MOD752: 83C752, 87C752
$MOD751: 83C751, 87C751
$MOD154: 83C514, 80C154, 85C154
$MOD252: 80C252, 83C252, 87C252, 80C51FA, 83C51FA, 87C51FA,
83C51FB, 87C51FB
$MOD521: 80C521, 80C321, 87C521, 80C541, 87C541
$MOD552: 80C552, 83C552, 87C552
$MOD652: 80C652, 83C652
$MOD851: 80C851, 83C851
CONTROL: $MOD51
$MOD52
$MOD44
$MOD152
$MOD515
$MOD512
$MOD451
$MOD452
$MOD751
$MOD752
$MOD154
$MOD252
$MOD521
$MOD552
$MOD652
$MOD517
$MOD851
$NOMOD
ABBREV:
DEFAULT: $NOMOD
TYPE: Primary
EXAMPLES: $MOD51
$MOD52
$MOD44
$MOD515
$MOD512
$MOD152
$MOD451
$MOD452
$MOD751
$MOD752
$MOD154
$MOD252
$MOD521
$MOD552
$MOD652
$MOD517
$MOD851
$NOMOD
$OBJECT(file)
$NOOBJECT
6-4
These controls determine whether or not a standard Intel
Hexadecimal format object file is created. $NOOBJECT
specifies that an object file will not be created. $OBJECT
specifies that an object file will be created. If other than
the default name is to be used for the object file, the
$OBJECT control allows any legal file name to be specified as
the object filename. The default name used for the object
file is the source file name root with a .HEX extension.
CONTROL: $OBJECT(file)
$NOOBJECT
ABBREV: $OJ(file)
$NOOJ
DEFAULT: $OBJECT(source.HEX)
TYPE: Primary
EXAMPLES: $OJ(A:NEWNAME.OBJ)
$NOOBJECT
$PAGING
$NOPAGING
These controls specify whether or not the output listing will
be broken into pages or will be output as one continuous
listing. When the $NOPAGING control is used, the $EJECT and
$PAGELENGTH controls are ignored. With the $PAGING control, a
form feed and header line is inserted into the output listing
whenever an $EJECT control is met, or whenever the number of
lines output on the current page exceeds the value specified
by the $PAGELENGTH control. The header line contains source
file name, title (if $TITLE control was used), date (if $DATE
control was used) and page number.
CONTROL: $PAGING
$NOPAGING
ABBREV: $PI
$NOPI
DEFAULT: $PAGING
TYPE: Primary
EXAMPLES: $PAGING
$NOPI
$PAGELENGTH(n)
Sets the maximum number of lines, (n), on a page of the output
listing. If the maximum is exceeded, a form feed and page
header is inserted in the output listing. This control allows
the number of lines per page to be set anywhere between 10 and
255. If the number of lines specified is less than 10,
pagelength will be set to 10. If the number of lines
specified is greater than 255, pagelength will be set to 255.
The $NOPAGING control will override this control.
CONTROL: $PAGELENGTH(n)
ABBREV: $PL(n)
DEFAULT: $PAGELENGTH(60)
TYPE: Primary
EXAMPLES: $PAGELENGTH(48)
6-5
$PL(58)
$PAGEWIDTH(n)
Sets the maximum number of characters, (n), on a line of the
output listing. This control allows the number of characters
per line to be set anywhere between 72 and 132. If the number
specified is less than 72, the pagewidth is set at 72. If the
number specified is greater than 132, the pagewidth is set at
132. If the pagewidth is specified between 72 and 100 and the
line being output exceeds the pagewidth specification, the
line is truncated at the specified pagewidth and a carriage
return/line feed pair is inserted in the listing. If the
pagewidth is specified to be greater than 100 and the line
being output exceed the pagewidth specification, a carriage
return/line feed pair is inserted at the specified pagewidth
and the line will continue to be listed on the next line
beginning at column 80.
CONTROL: $PAGEWIDTH(n)
ABBREV: $PW(n)
DEFAULT $PAGEWIDTH(72)
TYPE: Primary
EXAMPLES: $PAGEWIDTH(132)
$PW(80)
$PRINT(file)
$NOPRINT
These controls determine whether or not a listing file is
created. $NOPRINT specifies that a listing file will not be
created. $PRINT specifies that an listing file will be
created. If other than the default name is to be used for the
listing file, the $PRINT control allows any legal file name to
be specified as the listing filename. The default name used
for the listing file is the source file name root with a .LST
extension.
CONTROL: $PRINT(file)
$NOPRINT
ABBREV: $PR
$NOPR
DEFAULT: $PRINT(source.LST)
TYPE: Primary
EXAMPLES: $PRINT(A:CONTROL.OUT)
$NOPR
$SYMBOLS
$NOSYMBOLS
Selects whether or not the symbol table is appended to the
listing output. $SYMBOLS causes the symbol table to be sorted
alphabetically by symbol, formatted and output to the listing
file. Along with the symbol name, its value and type are
output. Values are output in hexadecimal. Types include NUMB
6-6
(number), ADDR (address), REG (register symbol) and ACC
(accumulator symbol). If a symbol was of type ADDR, it
segment is also output as either C (code), D (data) or X
(external). Other information listed with the symbols is NOT
USED (symbol defined but never referenced), UNDEFINED (symbol
referenced but never defined) and REDEFINEABLE (symbol defined
using the SET directive). The type and value listed for a
REDEFINABLE symbol is that of its last definition in the
source program. $NOSYMBOLS does not output the symbol table.
CONTROL: $SYMBOLS
$NOSYMBOLS
ABBREV: $SB
$NOSB
DEFAULT: $SYMBOLS
TYPE: Primary
EXAMPLES: $SB
$NOSYMBOLS
$TITLE(string)
Places the ASCII string enclosed by the parenthesis in the
title field of the page header. The ASCII string can be from
0 to 64 characters long. If the string is greater than 64
characters or if the width of the page will not support such a
long title, the title will be truncated. If parentheses are
part of the string, they must be balanced.
CONTROL: $TITLE(string)
ABBREV: $TT(string)
DEFAULT: No title in page header
TYPE: Primary
EXAMPLES: $TITLE(SAMPLE PROGRAM V1.2)
$TT(METALINK (TM) CROSS ASSEMBLER)
6-7
CHAPTER 7
8051 CROSS ASSEMBLER MACRO PROCESSOR
7.1. Introduction
Macros are useful for code that is used repetitively throughout
the program. It saves the programmer the time and tedium of
having to specify the code every time it is used. The code is
written only once in the macro definition and it can be used
anywhere in the source program any number of times by simply
using the macro name.
Sometimes there is confusion between macros and subroutines.
Subroutines are common routines that are written once by the
programmer and then accessed by CALLing them. Subroutines are
usually used for longer and more complex routines where the
call/return overhead can be tolerated. Macros are commonly used
for simpler routines or where the speed of in-line code is
required.
7.2. Macro Definition
Before a macro can be used, it first must be defined. The macro
definition specifies a template that is inserted into the source
program whenever the macro name is encountered. Macro
definitions can not be nested, but once a macro is defined, it
can be used in other macro definitions. Macros used this way can
be nested up to nine levels deep.
The macro definition has three parts to it: 1) the macro header
which specifies the macro name and its parameter list, 2) the
macro body which is the part that is actually inserted into the
source program, and 3) the macro terminator.
The macro header has the following form:
name MACRO <parameter list>
The name field contains a unique symbol that it used to identify
the macro. Whenever that symbol is encountered in the source
program, the Cross Assembler will automatically insert the macro
body in the source program at that point. The name must be a
unique symbol that follows all the rules of symbol formation as
outlined in Chapter 2.
The MACRO field of the macro header contains the keyword MACRO.
This is used to notify the Cross Assembler that this is the
beginning of a macro definition.
7-1
The <parameter list> field of the macro header lists anywhere
from zero to 16 parameters that are used in the macro body and
are defined at assembly time. The symbols used in the parameter
list are only used by the Cross Assembler during the storing of
the macro definition. As a result, while symbols used in the
parameter list must be unique symbols that follow all the the
rules of symbol formation as outlined in Chapter 2, they can be
reissued in the parameter list of another macro definition
without conflict. Parameter list items are separated from one
another by a comma. The following are examples of macro
definition headers:
MULT_BY_16 MACRO (no parameters)
DIRECT_ADD MACRO DESTINATION,SOURCE (two parameters)
The macro body contains the template that will replace the macro
name in the source program. The macro body can contain
instructions, directives, conditional assembly statements or
controls. As a matter of fact, the macro body can contain any
legal Cross Assembler construct as defined in Chapters 2, 4, 5
and 6.
There are two macro definition terminators: ENDM and EXITM.
Every macro definition must have an ENDM at the end of its
definition to notify the Cross Assembler that the macro
definition is complete. The EXITM terminator is an alternative
ending of the macro that is useful with conditional assembly
statements. When a EXITM is encountered in a program, all
remaining statements (to the ENDM) are ignored.
The following is an example of a macro definition that multiplies
the Accumulator by 16:
MULT_BY_16 MACRO
RL A ;* 2
RL A ;* 4
RL A ;* 8
RL A ;* 16
ENDM
The following is an example of a macro that adds two numbers
together. This could be used by the programmer to do direct
memory to memory adds of external variables (create a virtual
instruction).
DIRECT_ADDX MACRO DESTINATION,SOURCE (two parameters)
MOV R0,#SOURCE
MOVX A,@R0
MOV R1,A
MOV R0,#DESTINATION
MOVX A,@R0
ADD A,R1
MOVX @R0,A
ENDM
7-2
A final macro definition example shows the use of the EXITM
macro terminator. If CMOS is non-zero, the MOV and only the MOV
instruction will be translated by the Cross Assembler.
IDLE MACRO
IF (CMOS)
MOV PCON,#IDL
EXITM
ENDIF
JMP $
ENDM
7-3
7.3. Special Macro Operators
There are four special macro operators that are defined below:
% when the PERCENT sign prefaces a symbol in the
parameter list, the symbol's value is passed to
the macro's body instead of the symbol itself.
! when the EXCLAMATION POINT precedes a character,
that character is handled as a literal and is
passed to the macro body with the EXCLAMATION
POINT removed. This is useful when it is
necessary to pass a delimiter to the macro body.
For example, in the following parameter list, the
second parameter passed to the macro body would be
a COMMA ( , ):
GENERATE_INST 75,!,,STK_VALUE
& when the AMPERSAND is used in the macro body, the
symbols on both sides of it are concatenated
together and the AMPERSAND is removed.
;; when double SEMI-COLONS are used in a macro
definition, the comment preceded by the double
SEMI_COLONS will not be saved and thus will not
appear in the listing whenever the macro is
invoked. Using the double SEMI-COLONS lowers the
memory requirement in storing the macro
definitions and should be used whenever possible.
Examples of using the above special macro operators follow in the
"Using Macros" section.
7.4. Using Macros
This section section discusses several situations that arise
using macros and how to handle them. In general the discussion
uses examples to get the point across. First the macro
definition is listed, then the source line program that will
invoke the macro and finally how the macro was expanded by the
Cross Assembler.
7.4.1. NESTING MACROS
The following shows a macro nested to a depth of three.
Remember, definitions cannot be nested. Macros must be defined
before they are used in other macro definitions.
;MACRO DEFINITIONS
GET_EXT_BYTE MACRO EXT_ADDR
MOV R0,#EXT_ADDR
MOVX A,@R0
ENDM
7-4
ADD_EXT_BYTES MACRO EXT_DEST,EXT_SRC
GET_EXT_BYTE EXT_DEST
MOV R1,A
GET_EXT_BYTE EXT_SRC
ADD A,R1
ENDM
ADD_DIRECT_BYTES MACRO DESTINATION,SOURCE
IF (SMALL_MODEL)
MOV A,SOURCE
ADD A,DESTINATION
MOV DESTINATION
ELSE
ADD_EXT_BYTES DESTINATION,SOURCE
MOVX @R0,A
ENDIF
ENDM
;USAGE IN PROGRAM
ADD_DIRECT_BYTES 127,128
;TRANSLATED MACRO
30 +1 ADD_DIRECT_BYTES 127,128
31 +1 IF (SMALL_MODEL)
32 +1 MOV A,128
33 +1 ADD A,127
34 +1 MOV 127
35 +1 ELSE
36 +2 ADD_EXT_BYTES 127,128
37 +3 GET_EXT_BYTE 127
0100 787F 38 +3 MOV R0,#127
0102 E2 39 +3 MOVX A,@R0
0103 F9 40 +2 MOV R1,A
41 +3 GET_EXT_BYTE 128
0104 7880 42 +3 MOV R0,#128
0106 E2 43 +3 MOVX A,@R0
0107 29 44 +2 ADD A,R1
0108 F2 45 +1 MOVX @R0,A
46 +1 ENDIF
48
Two things should be pointed out from the above example. First,
the order of the parameter list is important. You must maintain
the the order of parameters from the macro definition if the
Cross Assembler is to translate the macro correctly.
Secondly, in order to pass parameters to nested macros, simply
use the same parameter symbol in the parameter list of the
definition. For example, the parameter DESTINATION was passed
properly to the nested macros ADD_EXT_BYTES and GET_EXT_BYTE.
This occurred because in the macro definition of
ADD_DIRECT_BYTES, the parameter DESTINATION was specified in the
7-5
parameter lists of both ADD_EXT_BYTES and GET_EXT_BYTE.
7.4.2. LABELS IN MACROS
You have two choices for specifying labels in a macro body. A
label can either be passed to the body as a parameter or it can
be generated within the body. The following example shows both
ways.
;MACRO DEFINITION
MULTIPLE_SHIFT MACRO LABEL,LABEL_SUFFIX,COUNTER,N
COUNTER SET COUNTER+1 ;INCREMENT SUFFIX FOR NEXT
USAGE
LABEL: MOV R0,#N
SHIFT&LABEL_SUFFIX: RL A
DJNZ R0,SHIFT&LABEL_SUFFIX
ENDM
;USAGE IN PROGRAM
MULTIPLE_SHIFT LOOP_SHIFT,%COUNT,COUNT,4
;TRANSLATED MACRO
15 +1 MULTIPLE_SHIFT LOOP_SHIFT,%COUNT,COUNT,4
0006 16 +1 COUNT SET COUNT+1
17 +1
0100 7804 18 +1 LOOP_SHIFT: MOV R0,#4
0102 23 19 +1 SHIFT5: RL A
0103 D8FD 20 +1 DJNZ R0,SHIFT5
22
Points to note in the above example: 1) the double semi-colon
caused the comment not to be listed in the translated macro; 2)
the percent sign caused the value of COUNT (in this case the
value 5) to be passed to the macro body instead of the symbol;
and 3) the ampersand allowed two symbols to be concatenated to
form the label SHIFT5.
7-6
CHAPTER 8
8051 CROSS ASSEMBLER ERROR CODES
8.1. Introduction
When the Cross Assembler encounters an error in the source
program, it will emit an error message in the listing file. If
the $NOPRINT control has been invoked, the error message will be
output to the screen.
There are basically two types of errors that are encountered by
the Cross Assembler, translation errors and I/O errors. I/O
errors are usually fatal errors. However, whenever an error is
detected, the Cross Assembler makes every effort possible to
continue with the assembly.
If it is possible to recover from the error and continue
assembling, the Cross Assembler will report the error, use a
default condition and continue on its way. However, when a fatal
error is encountered, it is impossible for the Cross Assembler to
proceed. In this case, the Cross Assembler reports the error and
then aborts the assembly process.
Fatal I/O error messages are displayed on the screen and are of
the form:
FATAL ERROR opening <filename>
where <filename> would be replaced with the file designator
initially entered or read from the source program. The cause of
this error is usually obvious, typically a typographical error or
the wrong drive specification.
Another fatal I/O error message is:
FATAL ERROR writing to <type> file
where <type> would be replaced with either "listing" or "object".
The cause of this error is usually either a write protected disk
or a full disk.
Translation error reports contain at least three lines. The
first line is the source line in which the error was detected,
the second line is a pointer to the character, symbol, expression
or line that caused the error. The final line is the error
message itself. There may be more than one error message,
depending on the number of errors in the source line. An example
of a source line with two errors in it follows:
0100 2323 26 START: MOV AB,@35
8-1
****----------------------------------------^---^
****ERROR #20: Illegal operand
****ERROR #20: Illegal operand
The errors are pointed out by the up-arrows ( ^ ). For every up-
arrow there will be an error message. Errors are ordered left to
right, so the first error message corresponds to the left-most
up-arrow and so on. The error message includes an error number
and an description of the error. The error number can be used as
an index to the more detailed error explanations that follow in
this chapter.
After the Cross Assembler has completed its translation process,
it will print an assembly complete message:
ASSEMBLY COMPLETE, nn ERRORS FOUND
If it was an error free assembly, in place of the "nn" above the
word "NO" will be output. However, if errors were encountered
during the assembly process, the "nn" will be replaced with the
number of errors that were found (up to a maximum of 50). In this
case, an error summary will follow in the listing file with all
the errors that were reported during the assembly. An error
summary looks like the following:
ERROR SUMMARY:
Line #26, ERROR #20: Illegal operand
Line #26, ERROR #20: Illegal operand
The same error message that occurred after the source line
appears again prefaced by the source line number to aid in
tracking down the error in the source listing.
8.2. Explanation of Error Messages
ERROR #1: Illegal character
This error occurs when the Cross Assembler encounters a
character that is not part of its legal character set. The
Cross Assembler character set can be found in Appendix D.
ERROR #2: Undefined symbol
This error occurs when the Cross Assembler tries to use a
symbol that hasn't been defined. The two most common reasons
for this error are typographical errors and forward
references.
ERROR #3: Duplicate symbol
This error occurs when a previously defined symbol or a
reserved symbol is attempted to be defined again. Refer to
Appendix C for the reserved words. Also inspect the symbol in
the symbol table listing. If the symbol doesn't appear there,
you are using a reserved word. If the symbol does appear, its
original definition will be listed.
ERROR #4: Illegal digit for radix
A digit was encountered that is not part of the legal digits
8-2
for the radix specified. Chapter 2 lists the legal digits for
each radix available. Often this error occurs because a
symbol was started with a number instead of a letter, question
mark, or underscore.
ERROR #5: Number too large
The number specified, or the returned value of the expression,
exceeds 16-bit precision. The largest value allowed is
65,535.
ERROR #6: Missing END directive
The source program must end with one and only one END
directive. The END is placed after all the assembly line
statements.
ERROR #7: Illegal opcode/directive after label
The symbol after a label is not an opcode nor a directive that
allows labels. The only thing permitted on a line after a
label is an instruction, the DS, DB or DW directives, or a
comment. If none of these are found, this error will be
reported.
ERROR #8: Illegal assembly line
The assembly line doesn't begin with a symbol, label,
instruction mnemonic, control, directive, comment or null
line. No attempt is made to translate such a line.
ERROR #9: Text beyond END directive
The END directive must be the last line of the source program.
Any text beyond the END line will cause this error. Any such
text is ignore. Text here is defined as any printable ASCII
characters.
ERROR #10: Illegal or missing expression
A number, symbol or arithmetic expression was expected, but it
was either found to be missing or the Cross Assembler was
unable to evaluate it properly.
ERROR #11: Illegal or missing expression operator
An arithmetic operator was expected but it is either missing
or it is not one of the legal operators specified in Chapter
2.
ERROR #12: Unbalanced parentheses
In evaluating an expression, the parentheses in the expression
were found not to balance.
ERROR #13: Illegal or missing expression value
In evaluating an expression, the Cross Assembler expected to
find either a number or a symbol, but it was either missing or
illegal.
ERROR #14: Illegal literal expression
This error occurs when a null ASCII literal string is found.
A null ASCII literal is nothing more than two apostrophes
together ( '' ) and is illegal.
8-3
ERROR #15: Expression stack overflow
The expression stack has a depth of 32 values. The expression
being evaluated exceeds this depth. This is a very rare
error. However, if you ever get it, divide the expression
into two or more expressions using the EQU directive.
ERROR #16: Division by zero
The expression being evaluated includes an attempt to divide
by zero.
ERROR #17: Illegal bit designator
A bit designator address was specified in the source program
and it points to an illegal bit address. A bit designator
contains a byte address, followed by a PERIOD, followed by the
bit index into the byte address (e.g., ACC.7) as discussed in
Chapter 2. This error can occur for one of two reasons.
First, if the number or a symbol that is used to specify the
byte address part of the bit designator is not a legal bit
addressable address, ERROR #17 will occur. Second, if the bit
index into the byte address exceeds the number 7, again ERROR
#17 will be output.
ERROR #18: Target address exceeds relative address range
A Program Counter relative jump instruction (e.g., SJMP, JZ,
JNC, etc.) was decoded with the target address of the jump
exceeding the maximum possible forward jump of 127 bytes or
the maximum possible backward jump of 128 bytes.
ERROR #20: Illegal operand
The operand specified is not a legal operand for the
instruction. Review the legal operands allowed for the
instruction.
ERROR #21: Illegal indirect register
R0 and R1 are the only primary legal indirect register. This
error occurs when the indirect addressing mode designator (@)
is not followed by either R0, R1 or symbols that were defined
to be equivalent to either R0 or R1. This error can also
occur in the MOVC A,@A+DPTR, MOVC A,@A+PC, MOVX A,@DPTR, MOVX
@DPTR,A and the JMP @A+DPTR instructions if the operands after
the indirect addressing mode designator ( @ ) aren't specified
properly.
ERROR #22: Missing operand delimiter
A COMMA operand delimiter is missing from the operand fields
of the instruction.
ERROR #23: Illegal or missing directive
This error occurs when the Cross Assembler cannot find a legal
directive. The most common cause of this error is due to
leaving the COLON off a label. As a result, the following
opcode mnemonic is attempted to be decoded as a directive.
ERROR #24: Attempting to EQUate a previously SET symbol
Once a symbol is defined using the SET directive, it cannot be
8-4
later redefined using the EQU directive.
ERROR #25: Attempting to SET a previously EQUated symbol
Once a symbol is defined using the EQU directive, it cannot be
redefined. If you want the symbol to be redefineable, use the
SET directive.
ERROR #26: Illegal SET/EQU expression
The expression following the SET or EQU directive is illegal.
This typically occurs when an attempt is made to define a
symbol to be equivalent to an implicit register other than A,
R0, R1, R2, R3, R4, R5, R6 or R7.
ERROR #27: Illegal expression with forward reference
This error occurs when an expression contains a symbol that
hasn't been defined yet. Move the symbol definition earlier
in the source file.
ERROR #28: Address exceeds segment range
The address specified exceeds 255 and you are in the DSEG,
BSEG, or ISEG.
ERROR #29: Expecting an EOL or COMMENT
The Cross Assembler has completed processing a legal assembly
language line and expected the line to be terminated with
either a COMMENT or a carriage return/line feed pair.
ERROR #30: Illegal directive with current active segment
The specified directive is not legal in the active segment.
This can happen by trying to use the DBIT directive in other
than the BSEG, or using the DS directive in the BSEG.
ERROR #31: Only two character string allowed
This error occurs using the DW directive. The maximum ASCII
literal allowed in a DW specification is a two character
string.
ERROR #32: Byte definition exceeds 255
This error occurs using the DB directive. The value specified
in the DB specification cannot fit into a byte.
ERROR #33: Premature end of string
An ASCII literal string was not terminated properly with an
apostrophe.
ERROR #34: Illegal register bank number
This error occurs when the number specified with the USING
directive exceed 3. Legal register bank numbers are: 0, 1, 2,
3.
ERROR #35: Include file nesting exceeds 8
The maximum number of nested include files is eight. You will
get this error if you exceed this limit.
ERROR #36: Illegal or missing argument
This error occurs when the syntax of a Cross Assembler control
8-5
requires an argument and it was either incorrectly specified
or is missing all together.
ERROR #37: Illegal control statement
The Cross Assembler does not recognize the specified control.
The legal controls are detailed in Chapter 6.
ERROR #38: Unable to open file
The Cross Assembler is unable to open the file as specified.
This is a fatal error which will abort the assembly process.
ERROR #39: Illegal file specification
The file specification is not a legal file designator. Refer
to your DOS manual for a description of legal file
designators. This is a fatal error which will abort the
assembly process.
ERROR #40: Program synchronization error
This error occurs when the Cross Assembler is generating the
object hex file and finds that the code segment location
counter is not advancing properly. There are two cases where
this can happen. First, if the source program uses ORG
directives and they are not placed in ascending order. Second,
if a generic CALL or JMP is made to a forward reference that
is actually defined later in the program to be a backward
reference. For example, the following code sequence will cause
this error due to the second reason:
BACK_REF: NOP
CALL FORWARD_REF
FORWARD_REF EQU BACK_REF
During the first pass, the generic CALL will be replaced with
a 3-byte LCALL instruction. During the second pass, the
generic CALL will be replaced with a 2-byte ACALL instruction.
To prevent this kind of problem, use the generic CALLs and
JMPs with labeled targets, not EQU or SET defined symbols.
ERROR #41: Insufficient memory
This error occurs when there isn't enough memory to hold all
the symbols that have been generated by the source program.
If you have 96 Kbytes or more of RAM this will be a very rare
error. Only a massive source program or numerous large macros
could potentially cause this error. However, if this error
does occur, your best bet is to either buy more memory or to
break up your program into smaller pieces and share common
symbols with a common $INCLUDE file.
ERROR #42: More errors detected, not listed
The internal error buffer can hold 50 errors. If more than 50
errors occur, only the first 50 will be reported.
ERROR #43: ENDIF without IF
The terminator of a conditional assembly block (ENDIF) was
recognized without seeing a matching IF.
8-6
ERROR #44: Missing ENDIF
A conditional assembly block was begun with an IF statement,
but no matching ENDIF was detected.
ERROR #45: Illegal or missing macro name
The MACRO keyword was recognized, but the symbol that is
supposed to precede the MACRO keyword was missing, an illegal
symbol or a duplicate symbol.
ERROR #46: Macro nesting too deep
Macros can be nested to a depth of 9 levels. Exceeding this
limit will cause this error.
ERROR #47: Number of parameters doesn't match definition
In attempting to use a macro, the number of parameters in the
parameter list does not equal the number of parameters
specified in the macro definition. They must match.
ERROR #48: Illegal parameter specification
This error typically occurs when a previously defined symbol
is used in the parameter list of the macro definition.
ERROR #49: Too many parameters
The maximum number of parameters in a macro parameter list is
sixteen. This error occurs when you exceed that limit.
ERROR #50: Line exceeds 255 characters
The maximum length of a source line is 255 characters. If a
carriage return/line feed pair is not detected in the first
256 characters of a line, this error is reported and the line
is truncated at 255 characters.
8-7
APPENDIX A
SAMPLE PROGRAM AND LISTING
A.1. Source File
;
; 8-bit by 8-bit signed multiply--byte signed multiply
;
; This routine takes the signed byte in multiplicand and
; multiplies it by the signed byte in multiplier and places
; the signed 16-bit product in product_high and product_low.
;
; This routine assumes 2s complement representation of signed
; numbers. The maximum numbers possible are then -128 and
; +127. Multiplying the possible maximum numbers together
; easily fits into a 16-bit product, so no overflow test is
; done on the answer.
;
; Registers altered by routine: A, B, PSW.
;
;
; Primary controls
$MOD51
$TITLE(BYTE SIGNED MULTIPLY)
$DATE(JUL-30-84)
$PAGEWIDTH(132)
$OBJECT(B:BMULB.OBJ)
;
;
; Variable declarations
;
sign_flag BIT 0F0H ;sign of product
multiplier DATA 030H ;8-bit multiplier
multiplicand DATA 031H ;8-bit multiplicand
product_high DATA 032H ;high byte of 16-bit answer
product_low DATA 033H ;low byte of answer
;
;
;
ORG 100H ;arbitrary start
;
byte_signed_multiply:
CLR sign_flag ;reset sign
MOV A,multiplier ;put multiplier in accumulator
JNB ACC.7,positive ;test sign bit of multiplier
CPL A ;negative--complement and
INC A ;add 1 to convert to positive
SETB sign_flag ;and set sign flag
;
A-1
positive: MOV B,multiplicand ;put multiplicand in B register
JNB B.7,multiply ;test sign bit of multiplicand
XRL B,#0FFh ;negative--complement and
INC B ;add 1 to convert to positive
CPL sign_flag ;complement sign flag
;
multiply: MUL AB ;do unsigned multiplication
;
sign_test: JNB sign_flag,byte_signed_exit ;if positive,done
XRL B,#0FFh ;else have to complement both
CPL A ;bytes of the product and inc
ADD A,#1 ;add here because inc doesn't
JNC byte_signed_exit ;set the carry flag
INC B ;if add overflowed A, inc the
;high byte
byte_signed_exit:
MOV product_high,B ;save the answer
MOV product_low,A
;
RET ;and return
END
A-2
A.2. Source File Listing
A-3
A-4
A-5
APPENDIX B
PRE-DEFINED BYTE AND BIT ADDRESSES
The following tables detail the pre-defined byte and bit addresses
for the 8051/8031 microcontrollers supported by the MetaLink family
of emulators. Proliferation parts are delimited from the standard
MCS-51 definitions by asterisk ("*") boxes.
This list covers these microcontrollers:
8044 8031 8032 8051 8052 8053 80C154 80C321
8344 80C31 80C32 8751 8752 8753 83C154 80C521
8744 80C51 80C52 85C154 87C521
87C51
80C321 80C51FA(80C252) 80C452 80C152JA/JB/JC/JD 80C851
80C541 83C51FA(83C252) 83C452 83C152JA/JC 83C851
87C541 87C51FA(87C252) 87C452
80C451 80C652 80C552 83C751 83C752 80512 80515 80C515 80C517
83C451 83C652 83C552 87C751 87C752 80532 80535 80C535 80C537
87C451 87C652 87C552
B.1. Pre-defined Byte Addresses
P0 DATA 080H ;PORT 0
SP DATA 081H ;STACK POINTER
DPL DATA 082H ;DATA POINTER - LOW BYTE
DPH DATA 083H ;DATA POINTER - HIGH BYTE
************************************************************************
for the 80C321/80C521
DPL1 DATA 084H ;DATA POINTER LOW 1
DPH1 DATA 085H ;DATA POINTER HIGH 1
DPS DATA 086H ;DATA POINTER SELECTION
************************************************************************
************************************************************************
for the 83C152/80C152
GMOD DATA 084H ;GSC MODE
TFIFO DATA 085H ;GSC TRANSMIT BUFFER
************************************************************************
************************************************************************
for the 80C517/80C537
WDTREL DATA 086H ;WATCHDOG TIMER RELOAD REG
************************************************************************
PCON DATA 087H ;POWER CONTROL
TCON DATA 088H ;TIMER CONTROL
TMOD DATA 089H ;TIMER MODE
TL0 DATA 08AH ;TIMER 0 - LOW BYTE
TL1 DATA 08BH ;TIMER 1 - LOW BYTE
B-1
************************************************************************
for the 83C751/83C752
RTL DATA 08BH ;TIMER 0 - LOW BYTE RELOAD
************************************************************************
TH0 DATA 08CH ;TIMER 0 - HIGH BYTE
TH1 DATA 08DH ;TIMER 1 - HIGH BYTE
************************************************************************
for the 83C751/83C752
RTH DATA 08DH ;TIMER 0 - HIGH BYTE RELOAD
************************************************************************
************************************************************************
for the 83C752
PWM DATA 08EH ;PULSE WIDTH MODULATION
************************************************************************
P1 DATA 090H ;PORT 1
************************************************************************
for the 83C152/80C152
P5 DATA 091H ;PORT 5
DCON0 DATA 092H ;DMA CONTROL 0
DCON1 DATA 093H ;DMA CONTROL 1
BAUD DATA 094H ;GSC BAUD RATE
ADR0 DATA 095H ;GSC MATCH ADDRESS 0
************************************************************************
************************************************************************
for the 80C452/83C452
DCON0 DATA 092H ;DMA CONTROL 0
DCON1 DATA 093H ;DMA CONTROL 1
************************************************************************
************************************************************************
for the 80C517/80C537
DPSEL DATA 092H ;DATA POINTER SELECT REGISTER
************************************************************************
SCON DATA 098H ;SERIAL PORT CONTROL
SBUF DATA 099H ;SERIAL PORT BUFFER
************************************************************************
for the 83C751/83C752
I2CON DATA 098H ;I2C CONTROL
I2DAT DATA 099H ;I2C DATA
************************************************************************
************************************************************************
for the 80C517/80C537
IEN2 DATA 09AH ;INTERRUPT ENABLE REGISTER 2
S1CON DATA 09BH ;SERIAL PORT CONTROL 1
S1BUF DATA 09CH ;SERIAL PORT BUFFER 1
S1REL DATA 09DH ;SERIAL RELOAD REG 1
************************************************************************
P2 DATA 0A0H ;PORT 2
IE DATA 0A8H ;INTERRUPT ENABLE
B-2
************************************************************************
for the 80C51FA/83C51FA(83C252/80C252)
SADDR DATA 0A9H ;SLAVE INDIVIDUAL ADDRESS
************************************************************************
************************************************************************
for the 80515/80535 and 80C517/80C537
IP0 DATA 0A9H ;INTERRUPT PRIORITY REGISTER 0
************************************************************************
************************************************************************
for the 80C321/80C521
WDS DATA 0A9H ;WATCHDOG SELECTION
WDK DATA 0AAH ;WATCHDOG KEY
************************************************************************
************************************************************************
for the 83C152/80C152
P6 DATA 0A1H ;PORT 6
SARL0 DATA 0A2H ;DMA SOURCE ADDR. 0 (LOW)
SARH0 DATA 0A3H ;DMA SOURCE ADDR. 0 (HIGH)
IFS DATA 0A4H ;GSC INTERFRAME SPACING
ADR1 DATA 0A5H ;GSC MATCH ADDRESS 1
************************************************************************
************************************************************************
for the 80C452/83C452
SARL0 DATA 0A2H ;DMA SOURCE ADDR. 0 (LOW)
SARH0 DATA 0A3H ;DMA SOURCE ADDR. 0 (HIGH)
************************************************************************
************************************************************************
for the 80C552/83C552
CML0 DATA 0A9H ;COMPARE 0 - LOW BYTE
CML1 DATA 0AAH ;COMPARE 1 - LOW BYTE
CML2 DATA 0ABH ;COMPARE 2 - LOW BYTE
CTL0 DATA 0ACH ;CAPTURE 0 - LOW BYTE
CTL1 DATA 0ADH ;CAPTURE 1 - LOW BYTE
CTL2 DATA 0AEH ;CAPTURE 2 - LOW BYTE
CTL3 DATA 0AFH ;CAPTURE 3 - LOW BYTE
************************************************************************
P3 DATA 0B0H ;PORT 3
************************************************************************
for the 83C152/80C152
SARL1 DATA 0B2H ;DMA SOURCE ADDR. 1 (LOW)
SARH1 DATA 0B3H ;DMA SOURCE ADDR. 1 (HIGH)
SLOTTM DATA 0B4H ;GSC SLOT TIME
ADR2 DATA 0B5H ;GSC MATCH ADDRESS 2
************************************************************************
************************************************************************
for the 80C452/83C452
SARL1 DATA 0B2H ;DMA SOURCE ADDR. 1 (LOW)
SARH1 DATA 0B3H ;DMA SOURCE ADDR. 1 (HIGH)
************************************************************************
IP DATA 0B8H ;INTERRUPT PRIORITY
************************************************************************
for the 80C51FA/83C51FA(83C252/80C252)
B-3
SADEN DATA 0B9H ;SLAVE ADDRESS ENABLE
************************************************************************
************************************************************************
for the 80515/80535 and 80C517/80C537
IP1 DATA 0B9H ;INTERRUPT PRIORITY REGISTER 1
IRCON DATA 0C0H ;INTERRUPT REQUEST CONTROL
CCEN DATA 0C1H ;COMPARE/CAPTURE ENABLE
CCL1 DATA 0C2H ;COMPARE/CAPTURE REGISTER 1 - LOW BYTE
CCH1 DATA 0C3H ;COMPARE/CAPTURE REGISTER 1 - HIGH BYTE
CCL2 DATA 0C4H ;COMPARE/CAPTURE REGISTER 2 - LOW BYTE
CCH2 DATA 0C5H ;COMPARE/CAPTURE REGISTER 2 - HIGH BYTE
CCL3 DATA 0C6H ;COMPARE/CAPTURE REGISTER 3 - LOW BYTE
CCH3 DATA 0C7H ;COMPARE/CAPTURE REGISTER 3 - HIGH BYTE
T2CON DATA 0C8H ;TIMER 2 CONTROL
CRCL DATA 0CAH ;COMPARE/RELOAD/CAPTURE - LOW BYTE
CRCH DATA 0CBH ;COMPARE/RELOAD/CAPTURE - HIGH BYTE
TL2 DATA 0CCH ;TIMER 2 - LOW BYTE
TH2 DATA 0CDH ;TIMER 2 - HIGH BYTE
************************************************************************
************************************************************************
for the 80C517/80C537
CC4EN DATA 0C9H ;COMPARE/CAPTURE 4 ENABLE
CCL4 DATA 0CEH ;COMPARE/CAPTURE REGISTER 4 - LOW BYTE
CCH4 DATA 0CFH ;COMPARE/CAPTURE REGISTER 4 - HIGH BYTE
************************************************************************
************************************************************************
for the RUPI-44
STS DATA 0C8H ;SIU STATUS REGISTER
SMD DATA 0C9H ;SERIAL MODE
RCB DATA 0CAH ;RECEIVE CONTROL BYTE
RBL DATA 0CBH ;RECEIVE BUFFER LENGTH
RBS DATA 0CCH ;RECEIVE BUFFER START
RFL DATA 0CDH ;RECEIVE FIELD LENGTH
STAD DATA 0CEH ;STATION ADDRESS
DMA_CNT DATA 0CFH ;DMA COUNT
************************************************************************
************************************************************************
for the 8052/8032, 80C51FA/83C51FA(83C252/80C252), 80C154/83C154
T2CON DATA 0C8H ;TIMER 2 CONTROL
************************************************************************
************************************************************************
for the 80C51FA/83C51FA(83C252/80C252)
T2MOD DATA 0C9H ;TIMER 2 MODE CONTROL
************************************************************************
************************************************************************
for the 8052/8032, 80C51FA/83C51FA(83C252/80C252), 80C154/83C154
RCAP2L DATA 0CAH ;TIMER 2 CAPTURE REGISTER, LOW BYTE
RCAP2H DATA 0CBH ;TIMER 2 CAPTURE REGISTER, HIGH BYTE
TL2 DATA 0CCH ;TIMER 2 - LOW BYTE
TH2 DATA 0CDH ;TIMER 2 - HIGH BYTE
************************************************************************
B-4
************************************************************************
for the 83C152/80C152
P4 DATA 0C0H ;PORT 4
DARL0 DATA 0C2H ;DMA DESTINATION ADDR. 0 (LOW)
DARH0 DATA 0C3H ;DMA DESTINATION ADDR. 0 (HIGH)
BKOFF DATA 0C4H ;GSC BACKOFF TIMER
ADR3 DATA 0C5H ;GSC MATCH ADDRESS 3
IEN1 DATA 0C8H ;INTERRUPT ENABLE REGISTER 1
************************************************************************
************************************************************************
for the 80C452/83C452
P4 DATA 0C0H ;PORT 4
DARL0 DATA 0C2H ;DMA DESTINATION ADDR. 0 (LOW)
DARH0 DATA 0C3H ;DMA DESTINATION ADDR. 0 (HIGH)
************************************************************************
************************************************************************
for the 80C451/83C451
P4 DATA 0C0H ;PORT 4
P5 DATA 0C8H ;PORT 5
************************************************************************
************************************************************************
for the 80512/80532
IRCON DATA 0C0H ;INTERRUPT REQUEST CONTROL
************************************************************************
************************************************************************
for the 80C552/83C552
P4 DATA 0C0H ;PORT 4
P5 DATA 0C4H ;PORT 5
ADCON DATA 0C5H ;A/D CONVERTER CONTROL
ADCH DATA 0C6H ;A/D CONVERTER HIGH BYTE
TM2IR DATA 0C8H ;T2 INTERRUPT FLAGS
CMH0 DATA 0C9H ;COMPARE 0 - HIGH BYTE
CMH1 DATA 0CAH ;COMPARE 1 - HIGH BYTE
CMH2 DATA 0CBH ;COMPARE 2 - HIGH BYTE
CTH0 DATA 0CCH ;CAPTURE 0 - HIGH BYTE
CTH1 DATA 0CDH ;CAPTURE 1 - HIGH BYTE
CTH2 DATA 0CEH ;CAPTURE 2 - HIGH BYTE
CTH3 DATA 0CFH ;CAPTURE 3 - HIGH BYTE
************************************************************************
PSW DATA 0D0H ;PROGRAM STATUS WORD
************************************************************************
for the RUPI-44
NSNR DATA 0D8H ;SEND COUNT/RECEIVE COUNT
SIUST DATA 0D9H ;SIU STATE COUNTER
TCB DATA 0DAH ;TRANSMIT CONTROL BYTE
TBL DATA 0DBH ;TRANSMIT BUFFER LENGTH
TBS DATA 0DCH ;TRANSMIT BUFFER START
FIFO0 DATA 0DDH ;THREE BYTE FIFO
FIFO1 DATA 0DEH
FIFO2 DATA 0DFH
************************************************************************
B-5
************************************************************************
for the 80C51FA/83C51FA(83C252/80C252)
CCON DATA 0D8H ;CONTROL COUNTER
CMOD DATA 0D9H ;COUNTER MODE
CCAPM0 DATA 0DAH ;COMPARE/CAPTURE MODE FOR PCA MODULE 0
CCAPM1 DATA 0DBH ;COMPARE/CAPTURE MODE FOR PCA MODULE 1
CCAPM2 DATA 0DCH ;COMPARE/CAPTURE MODE FOR PCA MODULE 2
CCAPM3 DATA 0DDH ;COMPARE/CAPTURE MODE FOR PCA MODULE 3
CCAPM4 DATA 0DEH ;COMPARE/CAPTURE MODE FOR PCA MODULE 4
************************************************************************
************************************************************************
for the 80515/80535
ADCON DATA 0D8H ;A/D CONVERTER CONTROL
ADDAT DATA 0D9H ;A/D CONVERTER DATA
DAPR DATA 0DAH ;D/A CONVERTER PROGRAM REGISTER
************************************************************************
************************************************************************
for the 83C152/80C152
DARL1 DATA 0D2H ;DMA DESTINATION ADDR. 1 (LOW)
DARH1 DATA 0D3H ;DMA DESTINATION ADDR. 1 (HIGH)
TCDCNT DATA 0D4H ;GSC TRANSMIT COLLISION COUNTER
AMSK0 DATA 0D5H ;GSC ADDRESS MASK 0
TSTAT DATA 0D8H ;TRANSMIT STATUS (DMA & GSC)
************************************************************************
************************************************************************
for the 80C452/83C452
DARL1 DATA 0D2H ;DMA DESTINATION ADDR. 1 (LOW)
DARH1 DATA 0D3H ;DMA DESTINATION ADDR. 1 (HIGH)
************************************************************************
************************************************************************
for the 80C451/83C451
P6 DATA 0D8H ;PORT 6
************************************************************************
************************************************************************
for the 80512/80532
ADCON DATA 0D8H ;A/D CONVERTER CONTROL
ADDAT DATA 0D9H ;A/D CONVERTER DATA
DAPR DATA 0DAH ;D/A CONVERTER PROGRAM REGISTER
P6 DATA 0DBH ;PORT 6
************************************************************************
************************************************************************
for the 83C751/83C752
I2CFG DATA 0D8H ;I2C CONFIGURATION
************************************************************************
************************************************************************
for the 80C552/83C552 and 80C652/83C652
S1CON DATA 0D8H ;SERIAL 1 CONTROL
S1STA DATA 0D9H ;SERIAL 1 STATUS
S1DAT DATA 0DAH ;SERIAL 1 DATA
S1ADR DATA 0DBH ;SERIAL 1 SLAVE ADDRESS
************************************************************************
B-6
************************************************************************
for the 80C517/80C537
CML0 DATA 0D2H ;COMPARE REGISTER 0 - LOW BYTE
CMH0 DATA 0D3H ;COMPARE REGISTER 0 - HIGH BYTE
CML1 DATA 0D4H ;COMPARE REGISTER 1 - LOW BYTE
CMH1 DATA 0D5H ;COMPARE REGISTER 1 - HIGH BYTE
CML2 DATA 0D6H ;COMPARE REGISTER 2 - LOW BYTE
CMH2 DATA 0D7H ;COMPARE REGISTER 2 - HIGH BYTE
ADCON0 DATA 0D8H ;A/D CONVERTER CONTROL 0
ADDAT DATA 0D9H ;A/D CONVERTER DATA
DAPR DATA 0DAH ;D/A CONVERTER PROGRAM REGISTER
P7 DATA 0DBH ;PORT 7
ADCON1 DATA 0DCH ;A/D CONVERTER CONTROL 1
P8 DATA 0DDH ;PORT 8
CTRELL DATA 0DEH ;COM TIMER REL REG - LOW BYTE
CTRELH DATA 0DFH ;COM TIMER REL REG - HIGH BYTE
************************************************************************
ACC DATA 0E0H ;ACCUMULATOR
************************************************************************
for the 83C152/80C152
BCRL0 DATA 0E2H ;DMA BYTE COUNT 0 (LOW)
BCRH0 DATA 0E3H ;DMA BYTE COUNT 0 (HIGH)
PRBS DATA 0E4H ;GSC PSEUDO-RANDOM SEQUENCE
AMSK1 DATA 0E5H ;GSC ADDRESS MASK 1
RSTAT DATA 0E8H ;RECEIVE STATUS (DMA & GSC)
************************************************************************
************************************************************************
for the 80C452/83C452
BCRL0 DATA 0E2H ;DMA BYTE COUNT 0 (LOW)
BCRH0 DATA 0E3H ;DMA BYTE COUNT 0 (HIGH)
HSTAT DATA 0E6H ;HOST STATUS
HCON DATA 0E7H ;HOST CONTROL
SLCON DATA 0E8H ;SLAVE CONTROL
SSTAT DATA 0E9H ;SLAVE STATUS
IWPR DATA 0EAH ;INPUT WRITE POINTER
IRPR DATA 0EBH ;INPUT READ POINTER
CBP DATA 0ECH ;CHANNEL BOUNDARY POINTER
FIN DATA 0EEH ;FIFO IN
CIN DATA 0EFH ;COMMAND IN
************************************************************************
************************************************************************
for the 80515/80535
P4 DATA 0E8H ;PORT 4
************************************************************************
************************************************************************
for the 80C451/83C451
CSR DATA 0E8H ;CONTROL STATUS
************************************************************************
************************************************************************
for the 80512/80532
P4 DATA 0E8H ;PORT 4
************************************************************************
B-7
************************************************************************
for the 80C552/83C552
IEN1 DATA 0E8H ;INTERRUPT ENABLE REGISTER 1
TM2CON DATA 0EAH ;T2 COUNTER CONTROL
CTCON DATA 0EBH ;CAPTURE CONTROL
TML2 DATA 0ECH ;TIMER 2 - LOW BYTE
TMH2 DATA 0EDH ;TIMER 2 - HIGH BYTE
STE DATA 0EEH ;SET ENABLE
RTE DATA 0EFH ;RESET/TOGGLE ENABLE
************************************************************************
************************************************************************
for the 80C51FA/83C51FA(83C252/80C252)
CL DATA 0E9H ;CAPTURE BYTE LOW
CCAP0L DATA 0EAH ;COMPARE/CAPTURE 0 LOW BYTE
CCAP1L DATA 0EBH ;COMPARE/CAPTURE 1 LOW BYTE
CCAP2L DATA 0ECH ;COMPARE/CAPTURE 2 LOW BYTE
CCAP3L DATA 0EDH ;COMPARE/CAPTURE 3 LOW BYTE
CCAP4L DATA 0EEH ;COMPARE/CAPTURE 4 LOW BYTE
************************************************************************
************************************************************************
for the 80C517/80C537
CTCON DATA 0E1H ;COM TIMER CONTROL REG
CML3 DATA 0E2H ;COMPARE REGISTER 3 - LOW BYTE
CMH3 DATA 0E3H ;COMPARE REGISTER 3 - HIGH BYTE
CML4 DATA 0E4H ;COMPARE REGISTER 4 - LOW BYTE
CMH4 DATA 0E5H ;COMPARE REGISTER 4 - HIGH BYTE
CML5 DATA 0E6H ;COMPARE REGISTER 5 - LOW BYTE
CMH5 DATA 0E7H ;COMPARE REGISTER 5 - HIGH BYTE
P4 DATA 0E8H ;PORT 4
MD0 DATA 0E9H ;MUL/DIV REG 0
MD1 DATA 0EAH ;MUL/DIV REG 1
MD2 DATA 0EBH ;MUL/DIV REG 2
MD3 DATA 0ECH ;MUL/DIV REG 3
MD4 DATA 0EDH ;MUL/DIV REG 4
MD5 DATA 0EEH ;MUL/DIV REG 5
ARCON DATA 0EFH ;ARITHMETIC CONTROL REG
************************************************************************
B DATA 0F0H ;MULTIPLICATION REGISTER
************************************************************************
for the 80C154/83C154
IOCON DATA 0F8H ;I/O CONTROL REGISTER
************************************************************************
************************************************************************
for the 83C152/80C152
BCRL1 DATA 0F2H ;DMA BYTE COUNT 1 (LOW)
BCRH1 DATA 0F3H ;DMA BYTE COUNT 1 (HIGH)
RFIFO DATA 0F4H ;GSC RECEIVE BUFFER
MYSLOT DATA 0F5H ;GSC SLOT ADDRESS
IPN1 DATA 0F8H ;INTERRUPT PRIORITY REGISTER 1
************************************************************************
B-8
************************************************************************
for the 83C851/80C851
EADRL DATA 0F2H ;EEPROM Address Register - Low Byte
EADRH DATA 0F3H ;EEPROM Address Register - High Byte
EDAT DATA 0F4H ;EEPROM Data Register
ETIM DATA 0F5H ;EEPROM Timer Register
ECNTRL DATA 0F6H ;EEPROM Control Register
************************************************************************
************************************************************************
for the 80C452/83C452
BCRL1 DATA 0F2H ;DMA BYTE COUNT 1 (LOW)
BCRH1 DATA 0F3H ;DMA BYTE COUNT 1 (HIGH)
ITHR DATA 0F6H ;INPUT FIFO THRESHOLD
OTHR DATA 0F7H ;OUTPUT FIFO THRESHOLD
IEP DATA 0F8H ;INTERRUPT PRIORITY
MODE DATA 0F9H ;MODE
ORPR DATA 0FAH ;OUTPUT READ POINTER
OWPR DATA 0FBH ;OUTPUT WRITE POINTER
IMIN DATA 0FCH ;IMMEDIATE COMMAND IN
IMOUT DATA 0FDH ;IMMEDIATE COMMAND OUT
FOUT DATA 0FEH ;FIFO OUT
COUT DATA 0FFH ;COMMAND OUT
************************************************************************
************************************************************************
for the 80515/80535
P5 DATA 0F8H ;PORT 5
************************************************************************
************************************************************************
for the 80512/80532
P5 DATA 0F8H ;PORT 5
************************************************************************
************************************************************************
for the 83C751/83C752
I2STA DATA 0F8H ;I2C STATUS
************************************************************************
************************************************************************
for the 80C552/83C552
IP1 DATA 0F8H ;INTERRUPT PRIORITY REGISTER 1
PWM0 DATA 0FCH ;PULSE WIDTH REGISTER 0
PWM1 DATA 0FDH ;PULSE WIDTH REGISTER 1
PWMP DATA 0FEH ;PRESCALER FREQUENCY CONTROL
T3 DATA 0FFH ;T3 - WATCHDOG TIMER
************************************************************************
************************************************************************
for the 80C517/80C537
CMEN DATA 0F6H ;COMPARE ENABLE
CML6 DATA 0F2H ;COMPARE REGISTER 6 - LOW BYTE
CMH6 DATA 0F3H ;COMPARE REGISTER 6 - HIGH BYTE
CML7 DATA 0F4H ;COMPARE REGISTER 7 - LOW BYTE
CMH7 DATA 0F5H ;COMPARE REGISTER 7 - HIGH BYTE
CMSEL DATA 0F7H ;COMPARE INPUT REGISTER
P5 DATA 0F8H ;PORT 5
P6 DATA 0FAH ;PORT 6
************************************************************************
B-9
************************************************************************
for the 80C51FA/83C51FA(83C252/80C252)
CH DATA 0F9H ;CAPTURE HIGH BYTE
CCAP0H DATA 0FAH ;COMPARE/CAPTURE 0 HIGH BYTE
CCAP1H DATA 0FBH ;COMPARE/CAPTURE 1 HIGH BYTE
CCAP2H DATA 0FCH ;COMPARE/CAPTURE 2 HIGH BYTE
CCAP3H DATA 0FDH ;COMPARE/CAPTURE 3 HIGH BYTE
CCAP4H DATA 0FEH ;COMPARE/CAPTURE 4 HIGH BYTE
************************************************************************
************************************************************************
for the 83C752
PWENA DATA 0FEH ;PULSE WIDTH ENABLE
************************************************************************
B-10
B.2. Pre-defined Bit Addresses
************************************************************************
for the 83C751/83C752
SCL BIT 080H ;P0.0 - I2C SERIAL CLOCK
SDA BIT 081H ;P0.1 - I2C SERIAL DATA
************************************************************************
IT0 BIT 088H ;TCON.0 - EXT. INTERRUPT 0 TYPE
IE0 BIT 089H ;TCON.1 - EXT. INTERRUPT 0 EDGE FLAG
IT1 BIT 08AH ;TCON.2 - EXT. INTERRUPT 1 TYPE
IE1 BIT 08BH ;TCON.3 - EXT. INTERRUPT 1 EDGE FLAG
TR0 BIT 08CH ;TCON.4 - TIMER 0 ON/OFF CONTROL
TF0 BIT 08DH ;TCON.5 - TIMER 0 OVERFLOW FLAG
TR1 BIT 08EH ;TCON.6 - TIMER 1 ON/OFF CONTROL
TF1 BIT 08FH ;TCON.7 - TIMER 1 OVERFLOW FLAG
************************************************************************
for the 83C751/83C752
C/T BIT 08EH ;TCON.6 - COUNTER OR TIMER OPERATION
GATE BIT 08FH ;TCON.7 - GATE TIMER
************************************************************************
************************************************************************
for the 80515/80535
INT3 BIT 090H ;P1.0 - EXT. INTERRUPT 3/CAPT & COMP 0
INT4 BIT 091H ;P1.1 - EXT. INTERRUPT 4/CAPT & COMP 1
INT5 BIT 092H ;P1.2 - EXT. INTERRUPT 5/CAPT & COMP 2
INT6 BIT 093H ;P1.3 - EXT. INTERRUPT 6/CAPT & COMP 3
INT2 BIT 094H ;P1.4 - EXT. INTERRUPT 2
T2EX BIT 095H ;P1.5 - TIMER 2 EXT. RELOAD TRIGGER INP
CLKOUT BIT 096H ;P1.6 - SYSTEM CLOCK OUTPUT
T2 BIT 097H ;P1.7 - TIMER 2 INPUT
************************************************************************
************************************************************************
for the 83C152/80C152
GRXD BIT 090H ;P1.0 - GSC RECEIVER DATA INPUT
GTXD BIT 091H ;P1.1 - GSC TRANSMITTER DATA OUTPUT
DEN BIT 092H ;P1.2 - DRIVE ENABLE TO ENABLE EXT DRIVE
TXC BIT 093H ;P1.3 - GSC EXTERNAL TRANSMIT CLOCK INPU
RXC BIT 094H ;P1.4 - GSC EXTERNAL RECEIVER CLOCK INPU
************************************************************************
************************************************************************
for the 83C552/80C552
CT0I BIT 090H ;P1.0 - CAPTURE/TIMER INPUT 0
CT1I BIT 091H ;P1.1 - CAPTURE/TIMER INPUT 1
CT2I BIT 092H ;P1.2 - CAPTURE/TIMER INPUT 2
CT3I BIT 093H ;P1.3 - CAPTURE/TIMER INPUT 3
T2 BIT 094H ;P1.4 - T2 EVENT INPUT
RT2 BIT 095H ;P1.5 - T2 TIMER RESET SIGNAL
SCL BIT 096H ;P1.6 - SERIAL PORT CLOCK LINE I2C
SDA BIT 097H ;P1.7 - SERIAL PORT DATA LINE I2C
************************************************************************
B-11
************************************************************************
for the 80C517/80C537
INT3 BIT 090H ;P1.0 - EXT. INTERRUPT 3/CAPT & COMP 0
INT4 BIT 091H ;P1.1 - EXT. INTERRUPT 4/CAPT & COMP 1
INT5 BIT 092H ;P1.2 - EXT. INTERRUPT 5/CAPT & COMP 2
INT6 BIT 093H ;P1.3 - EXT. INTERRUPT 6/CAPT & COMP 3
INT2 BIT 094H ;P1.4 - EXT. INTERRUPT 2
T2EX BIT 095H ;P1.5 - TIMER 2 EXT. RELOAD TRIGGER INPU
CLKOUT BIT 096H ;P1.6 - SYSTEM CLOCK OUTPUT
T2 BIT 097H ;P1.7 - TIMER 2 INPUT
************************************************************************
************************************************************************
for the 80C452/83C452 and 80C152/83C152
HLD BIT 095H ;P1.5 - DMA HOLD REQUEST I/O
HLDA BIT 096H ;P1.6 - DMA HOLD ACKNOWLEDGE OUTPUT
************************************************************************
************************************************************************
for the 83C751/83C752
INT0 BIT 095H ;P1.5 - EXTERNAL INTERRUPT 0 INPUT
INT1 BIT 096H ;P1.6 - EXTERNAL INTERRUPT 1 INPUT
T0 BIT 096H ;P1.7 - TIMER 0 COUNT INPUT
************************************************************************
RI BIT 098H ;SCON.0 - RECEIVE INTERRUPT FLAG
TI BIT 099H ;SCON.1 - TRANSMIT INTERRUPT FLAG
RB8 BIT 09AH ;SCON.2 - RECEIVE BIT 8
TB8 BIT 09BH ;SCON.3 - TRANSMIT BIT 8
REN BIT 09CH ;SCON.4 - RECEIVE ENABLE
SM2 BIT 09DH ;SCON.5 - SERIAL MODE CONTROL BIT 2
SM1 BIT 09EH ;SCON.6 - SERIAL MODE CONTROL BIT 1
SM0 BIT 09FH ;SCON.7 - SERIAL MODE CONTROL BIT 0
************************************************************************
for the 83C751/83C752
MASTER BIT(READ) 099H ;I2CON.1 - MASTER
STP BIT(READ) 09AH ;I2CON.2 - STOP
STR BIT(READ) 09BH ;I2CON.3 - START
ARL BIT(READ) 09CH ;I2CON.4 - ARBITRATION LOSS
DRDY BIT(READ) 09DH ;I2CON.5 - DATA READY
ATN BIT(READ) 09EH ;I2CON.6 - ATTENTION
RDAT BIT(READ) 09FH ;I2CON.7 - RECEIVE DATA
XSTP BIT(WRITE)098H ;I2CON.0 - TRANSMIT STOP
XSTR BIT(WRITE)099H ;I2CON.1 - TRANSMIT REPEATED START
CSTP BIT(WRITE)09AH ;I2CON.2 - CLEAR STOP
CSTR BIT(WRITE)09BH ;I2CON.3 - CLEAR START
CARL BIT(WRITE)09CH ;I2CON.4 - CLEAR ARBITRATION LOSS
CDR BIT(WRITE)09DH ;I2CON.5 - CLEAR DATA READY
IDLE BIT(WRITE)09EH ;I2CON.6 - GO IDLE
CXA BIT(WRITE)09FH ;I2CON.7 - CLEAR TRANSMIT ACTIVE
************************************************************************
EX0 BIT 0A8H ;IE.0 - EXTERNAL INTERRUPT 0 ENABLE
ET0 BIT 0A9H ;IE.1 - TIMER 0 INTERRUPT ENABLE
EX1 BIT 0AAH ;IE.2 - EXTERNAL INTERRUPT 1 ENABLE
ET1 BIT 0ABH ;IE.3 - TIMER 1 INTERRUPT ENABLE
ES BIT 0ACH ;IE.4 - SERIAL PORT INTERRUPT ENABLE
B-12
************************************************************************
for the 83C751/83C752
EI2 BIT 0ACH ;IE.4 - SERIAL PORT INTERRUPT ENABLE
************************************************************************
************************************************************************
for the 8052/8032, 80C154/83C154, 80C252(80C51FA), 80515/80535
ET2 BIT 0ADH ;TIMER 2 INTERRUPT ENABLE
************************************************************************
************************************************************************
for the 80C652/83C652
ES1 BIT 0ADH ;IE.5 - SERIAL PORT 1 INTERRUPT ENABLE
************************************************************************
************************************************************************
for the 80C252(80C51FA)
EC BIT 0AEH ;IE.6 - ENABLE PCA INTERRUPT
************************************************************************
************************************************************************
for the 80515/80535
WDT BIT 0AEH ;IEN0.6 - WATCHDOG TIMER RESET
************************************************************************
************************************************************************
for the 83C552/80C552
ES1 BIT 0ADH ;IEN0.5 - SERIAL PORT 1 INTERRUPT ENABLE
EAD BIT 0AEH ;IEN0.6 - ENABLE A/D INTERRUPT
************************************************************************
************************************************************************
for the 80C517/80C537
ET2 BIT 0ADH ;IEN0.5 - TIMER 2 INTERRUPT ENABLE
WDT BIT 0AEH ;IEN0.6 - WATCHDOG TIMER RESET
************************************************************************
EA BIT 0AFH ;IE.7 - GLOBAL INTERRUPT ENABLE
RXD BIT 0B0H ;P3.0 - SERIAL PORT RECEIVE INPUT
TXD BIT 0B1H ;P3.1 - SERIAL PORT TRANSMIT OUTPUT
INT0 BIT 0B2H ;P3.2 - EXTERNAL INTERRUPT 0 INPUT
INT1 BIT 0B3H ;P3.3 - EXTERNAL INTERRUPT 1 INPUT
T0 BIT 0B4H ;P3.4 - TIMER 0 COUNT INPUT
T1 BIT 0B5H ;P3.5 - TIMER 1 COUNT INPUT
WR BIT 0B6H ;P3.6 - WRITE CONTROL FOR EXT. MEMORY
RD BIT 0B7H ;P3.7 - READ CONTROL FOR EXT. MEMORY
PX0 BIT 0B8H ;IP.0 - EXTERNAL INTERRUPT 0 PRIORITY
PT0 BIT 0B9H ;IP.1 - TIMER 0 PRIORITY
PX1 BIT 0BAH ;IP.2 - EXTERNAL INTERRUPT 1 PRIORITY
PT1 BIT 0BBH ;IP.3 - TIMER 1 PRIORITY
PS BIT 0BCH ;IP.4 - SERIAL PORT PRIORITY
************************************************************************
for the 80C154/83C154
PT2 BIT 0BCH ;IP.5 - TIMER 2 PRIORITY
PCT BIT 0BFH ;IP.7 - INTERRUPT PRIORITY DISABLE
************************************************************************
B-13
************************************************************************
for the 80C652/83C652
PS1 BIT 0BDH ;IP.5 - SERIAL PORT 1 PRIORITY
************************************************************************
************************************************************************
for the 80C51FA/83C51FA(83C252/80C252)
PT2 BIT 0BDH ;IP.5 - TIMER 2 PRIORITY
PPC BIT 0BEH ;IP.6 - PCA PRIORITY
************************************************************************
************************************************************************
for the 80515/80535 and 80C517/80C537
EADC BIT 0B8H ;IEN1.0 - A/D CONVERTER INTERRUPT EN
EX2 BIT 0B9H ;IEN1.1 - EXT. INTERRUPT 2 ENABLE
EX3 BIT 0BAH ;IEN1.2 - EXT. INT 3/CAPT/COMP INT 0 EN
EX4 BIT 0BBH ;IEN1.3 - EXT. INT 4/CAPT/COMP INT 1 EN
EX5 BIT 0BCH ;IEN1.4 - EXT. INT 5/CAPT/COMP INT 2 EN
EX6 BIT 0BDH ;IEN1.5 - EXT. INT 6/CAPT/COMP INT 3 EN
SWDT BIT 0BEH ;IEN1.6 - WATCHDOG TIMER START
EXEN2 BIT 0BFH ;IEN1.7 - T2 EXT. RELOAD INTER START
IADC BIT 0C0H ;IRCON.0 - A/D CONVERTER INTER REQUEST
IEX2 BIT 0C1H ;IRCON.1 - EXT. INTERRUPT 2 EDGE FLAG
IEX3 BIT 0C2H ;IRCON.2 - EXT. INTERRUPT 3 EDGE FLAG
IEX4 BIT 0C3H ;IRCON.3 - EXT. INTERRUPT 4 EDGE FLAG
IEX5 BIT 0C4H ;IRCON.4 - EXT. INTERRUPT 5 EDGE FLAG
IEX6 BIT 0C5H ;IRCON.5 - EXT. INTERRUPT 6 EDGE FLAG
TF2 BIT 0C6H ;IRCON.6 - TIMER 2 OVERFLOW FLAG
EXF2 BIT 0C7H ;IRCON.7 - TIMER 2 EXT. RELOAD FLAG
T2IO BIT 0C8H ;T2CON.0 - TIMER 2 INPUT SELECT BIT 0
T2I1 BIT 0C9H ;T2CON.1 - TIMER 2 INPUT SELECT BIT 1
T2CM BIT 0CAH ;T2CON.2 - COMPARE MODE
T2R0 BIT 0CBH ;T2CON.3 - TIMER 2 RELOAD MODE SEL BIT 0
T2R1 BIT 0CCH ;T2CON.4 - TIMER 2 RELOAD MODE SEL BIT 1
I2FR BIT 0CDH ;T2CON.5 - EXT. INT 2 F/R EDGE FLAG
I3FR BIT 0CEH ;T2CON.6 - EXT. INT 3 F/R EDGE FLAG
T2PS BIT 0CFH ;T2CON.7 - PRESCALER SELECT BIT
************************************************************************
************************************************************************
for the 83C552/80C552
PS1 BIT 0BDH ;IP0.5 - SIO1
PAD BIT 0BEH ;IP0.6 - A/D CONVERTER
CMSR0 BIT 0C0H ;P4.0 - T2 COMPARE AND SET/RESET OUTPUTS
CMSR1 BIT 0C1H ;P4.1 - T2 COMPARE AND SET/RESET OUTPUTS
CMSR2 BIT 0C2H ;P4.2 - T2 COMPARE AND SET/RESET OUTPUTS
CMSR3 BIT 0C3H ;P4.3 - T2 COMPARE AND SET/RESET OUTPUTS
CMSR4 BIT 0C4H ;P4.4 - T2 COMPARE AND SET/RESET OUTPUTS
CMSR5 BIT 0C5H ;P4.5 - T2 COMPARE AND SET/RESET OUTPUTS
CMT0 BIT 0C6H ;P4.6 - T2 COMPARE AND TOGGLE OUTPUTS
CMT1 BIT 0C7H ;P4.7 - T2 COMPARE AND TOGGLE OUTPUTS
CTI0 BIT 0C8H ;TM2IR.0 - T2 CAPTURE 0
CTI1 BIT 0C9H ;TM2IR.1 - T2 CAPTURE 1
CTI2 BIT 0CAH ;TM2IR.2 - T2 CAPTURE 2
CTI3 BIT 0CBH ;TM2IR.3 - T2 CAPTURE 3
CMI0 BIT 0CCH ;TM2IR.4 - T2 COMPARATOR 0
CMI1 BIT 0CDH ;TM2IR.5 - T2 COMPARATOR 1
CMI2 BIT 0CEH ;TM2IR.6 - T2 COMPARATOR 2
T2OV BIT 0CFH ;TM2IR.7 - T2 OVERFLOW
B-14
************************************************************************
************************************************************************
for the RUPI-44
RBP BIT 0C8H ;STS.0 - RECEIVE BUFFER PROTECT
AM BIT 0C9H ;STS.1 - AUTO/ADDRESSED MODE SELECT
OPB BIT 0CAH ;STS.2 - OPTIONAL POLL BIT
BOV BIT 0CBH ;STS.3 - RECEIVE BUFFER OVERRUN
SI BIT 0CCH ;STS.4 - SIU INTERRUPT FLAG
RTS BIT 0CDH ;STS.5 - REQUEST TO SEND
RBE BIT 0CEH ;STS.6 - RECEIVE BUFFER EMPTY
TBF BIT 0CFH ;STS.7 - TRANSMIT BUFFER FULL
************************************************************************
************************************************************************
for the 8052/8032, 80C154/83C154, 80C51FA/83C51FA(83C252/80C252)
CAP2 BIT 0C8H ;T2CON.0 - CAPTURE OR RELOAD SELECT
CNT2 BIT 0C9H ;T2CON.1 - TIMER OR COUNTER SELECT
TR2 BIT 0CAH ;T2CON.2 - TIMER 2 ON/OFF CONTROL
EXEN2 BIT 0CBH ;T2CON.3 - TIMER 2 EXTERNAL ENABLE FLAG
TCLK BIT 0CCH ;T2CON.4 - TRANSMIT CLOCK SELECT
RCLK BIT 0CDH ;T2CON.5 - RECEIVE CLOCK SELECT
EXF2 BIT 0CEH ;T2CON.6 - EXTERNAL TRANSITION FLAG
TF2 BIT 0CFH ;T2CON.7 - TIMER 2 OVERFLOW FLAG
************************************************************************
************************************************************************
for the 83C152/80C152
EGSRV BIT 0C8H ;IEN1.0 - GSC RECEIVE VALID
EGSRE BIT 0C9H ;IEN1.1 - GSC RECEIVE ERROR
EDMA0 BIT 0CAH ;IEN1.2 - DMA CHANNEL REQUEST 0
EGSTV BIT 0CBH ;IEN1.3 - GSC TRANSMIT VALID
EDMA1 BIT 0CCH ;IEN1.4 - DMA CHANNEL REQUEST 1
EGSTE BIT 0CDH ;IEN1.5 - GSC TRANSMIT ERROR
************************************************************************
************************************************************************
for the 80512/80532
IADC BIT 0C0H ;IRCON.0 - A/D CONVERTER INTERRUPT REQ
************************************************************************
P BIT 0D0H ;PSW.0 - ACCUMULATOR PARITY FLAG
************************************************************************
for the 83C552/80C552
F1 BIT 0D1H ;PSW.1 - FLAG 1
************************************************************************
************************************************************************
for the 80512/80532
F1 BIT 0D1H ;PSW.1 - FLAG 1
MX0 BIT 0D8H ;ADCON.0 - ANALOG INPUT CH SELECT BIT 0
MX1 BIT 0D9H ;ADCON.1 - ANALOG INPUT CH SELECT BIT 1
MX2 BIT 0DAH ;ADCON.2 - ANALOG INPUT CH SELECT BIT 2
ADM BIT 0DBH ;ADCON.3 - A/D CONVERSION MODE
BSY BIT 0DCH ;ADCON.4 - BUSY FLAG
BD BIT 0DFH ;ADCON.7 - BAUD RATE ENABLE
************************************************************************
OV BIT 0D2H ;PSW.2 - OVERFLOW FLAG
RS0 BIT 0D3H ;PSW.3 - REGISTER BANK SELECT 0
B-15
RS1 BIT 0D4H ;PSW.4 - REGISTER BANK SELECT 1
F0 BIT 0D5H ;PSW.5 - FLAG 0
AC BIT 0D6H ;PSW.6 - AUXILIARY CARRY FLAG
CY BIT 0D7H ;PSW.7 - CARRY FLAG
************************************************************************
for the 80C51FA/83C51FA(83C252/80C252)
CCF0 BIT 0D8H ;CCON.0 -PCA MODULE 0 INTERRUPT FLAG
CCF1 BIT 0D9H ;CCON.1 -PCA MODULE 1 INTERRUPT FLAG
CCF2 BIT 0DAH ;CCON.2 -PCA MODULE 2 INTERRUPT FLAG
CCF3 BIT 0DBH ;CCON.3 -PCA MODULE 3 INTERRUPT FLAG
CCF4 BIT 0DCH ;CCON.4 -PCA MODULE 4 INTERRUPT FLAG
CR BIT 0DEH ;CCON.6 - COUNTER RUN
CF BIT 0DFH ;PCA COUNTER OVERFLOW FLAG
************************************************************************
************************************************************************
for the RUPI-44
SER BIT 0D8H ;NSNR.0 - RECEIVE SEQUENCE ERROR
NR0 BIT 0D9H ;NSNR.1 - RECEIVE SEQUENCE COUNTER-BIT 0
NR1 BIT 0DAH ;NSNR.2 - RECEIVE SEQUENCE COUNTER-BIT 1
NR2 BIT 0DBH ;NSNR.3 - RECEIVE SEQUENCE COUNTER-BIT 2
SES BIT 0DCH ;NSNR.4 - SEND SEQUENCE ERROR
NS0 BIT 0DDH ;NSNR.5 - SEND SEQUENCE COUNTER-BIT 0
NS1 BIT 0DEH ;NSNR.6 - SEND SEQUENCE COUNTER-BIT 1
NS2 BIT 0DFH ;NSNR.7 - SEND SEQUENCE COUNTER-BIT 2
************************************************************************
************************************************************************
for the 80515/80535
MX0 BIT 0D8H ;ADCON.0 - ANALOG INPUT CH SELECT BIT 0
MX1 BIT 0D9H ;ADCON.1 - ANALOG INPUT CH SELECT BIT 1
MX2 BIT 0DAH ;ADCON.2 - ANALOG INPUT CH SELECT BIT 2
ADM BIT 0DBH ;ADCON.3 - A/D CONVERSION MODE
BSY BIT 0DCH ;ADCON.4 - BUSY FLAG
CLK BIT 0DEH ;ADCON.5 - SYSTEM CLOCK ENABLE
BD BIT 0DFH ;ADCON.7 - BAUD RATE ENABLE
************************************************************************
************************************************************************
for the 80C652/83C652
CR0 BIT 0D8H ;S1CON.0 - CLOCK RATE 0
CR1 BIT 0D9H ;S1CON.1 - CLOCK RATE 1
AA BIT 0DAH ;S1CON.2 - ASSERT ACKNOWLEDGE
SI BIT 0DBH ;S1CON.3 - SIO1 INTERRUPT BIT
STO BIT 0DCH ;S1CON.4 - STOP FLAG
STA BIT 0DDH ;S1CON.5 - START FLAG
ENS1 BIT 0DEH ;S1CON.6 - ENABLE SIO1
************************************************************************
B-16
************************************************************************
for the 83C152/80C152
DMA BIT 0D8H ;TSTAT.0 - DMA SELECT
TEN BIT 0D9H ;TSTAT.1 - TRANSMIT ENABLE
TFNF BIT 0DAH ;TSTAT.2 - TRANSMIT FIFO NOT FULL
TDN BIT 0DBH ;TSTAT.3 - TRANSMIT DONE
TCDT BIT 0DCH ;TSTAT.4 - TRANSMIT COLLISION DETECT
UR BIT 0DDH ;TSTAT.5 - UNDERRUN
NOACK BIT 0DEH ;TSTAT.6 - NO ACKNOWLEDGE
LNI BIT 0DFH ;TSTAT.7 - LINE IDLE
HBAEN BIT 0E8H ;RSTAT.0 - HARDWARE BASED ACKNOWLEDGE EN
GREN BIT 0E9H ;RSTAT.1 - RECEIVER ENABLE
RFNE BIT 0EAH ;RSTAT.2 - RECEIVER FIFO NOT EMPTY
RDN BIT 0EBH ;RSTAT.3 - RECEIVER DONE
CRCE BIT 0ECH ;RSTAT.4 - CRC ERROR
AE BIT 0EDH ;RSTAT.5 - ALIGNMENT ERROR
RCABT BIT 0EEH ;RSTAT.6 - RCVR COLLISION/ABORT DETECT
OR BIT 0EFH ;RSTAT.7 - OVERRUN
PGSRV BIT 0F8H ;IPN1.0 - GSC RECEIVE VALID
PGSRE BIT 0F9H ;IPN1.1 - GSC RECEIVE ERROR
PDMA0 BIT 0FAH ;IPN1.2 - DMA CHANNEL REQUEST 0
PGSTV BIT 0FBH ;IPN1.3 - GSC TRANSMIT VALID
PDMA1 BIT 0FCH ;IPN1.4 - DMA CHANNEL REQUEST 1
PGSTE BIT 0FDH ;IPN1.5 - GSC TRANSMIT ERROR
************************************************************************
************************************************************************
for the 80C452/83C452
OFRS BIT 0E8H ;SLCON.0 - OUTPUT FIFO CH REQ SERVICE
IFRS BIT 0E9H ;SLCON.1 - INPUT FIFO CH REQ SERVICE
FRZ BIT 0EBH ;SLCON.3 - ENABLE FIFO DMA FREEZE MODE
ICOI BIT 0ECH ;SLCON.4 - GEN INT WHEN IMMEDIATE COMMAN
OUT REGISTER IS AVAILABLE
ICII BIT 0EDH ;SLCON.5 - GEN INT WHEN A COMMAND IS
WRITTEN TO IMMEDIATE COMMAND IN REG
OFI BIT 0EEH ;SLCON.6 - ENABLE OUTPUT FIFO INTERRUPT
IFI BIT 0EFH ;SLCON.7 - ENABLE INPUT FIFO INTERRUPT
EFIFO BIT 0F8H ;IEP.0 - FIFO SLAVE BUS I/F INT EN
PDMA1 BIT 0F9H ;IEP.1 - DMA CHANNEL REQUEST 1
PDMA0 BIT 0FAH ;IEP.2 - DMA CHANNEL REQUEST 0
EDMA1 BIT 0FBH ;IEP.3 - DMA CHANNEL 1 INTERRUPT ENABLE
EDMA0 BIT 0FCH ;IEP.4 - DMA CHANNEL 0 INTERRUPT ENABLE
PFIFO BIT 0FDH ;IEP.5 - FIFO SLAVE BUS I/F INT PRIORITY
************************************************************************
************************************************************************
for the 80C451/83C451
IBF BIT 0E8H ;CSR.0 - INPUT BUFFER FULL
OBF BIT 0E9H ;CSR.1 - OUTPUT BUFFER FULL
IDSM BIT 0EAH ;CSR.2 - INPUT DATA STROBE
OBFC BIT 0EBH ;CSR.3 - OUTPUT BUFFER FLAG CLEAR
MA0 BIT 0ECH ;CSR.4 - AFLAG MODE SELECT
MA1 BIT 0EDH ;CSR.5 - AFLAG MODE SELECT
MB0 BIT 0EEH ;CSR.6 - BFLAG MODE SELECT
MB1 BIT 0EFH ;CSR.7 - BFLAG MODE SELECT
************************************************************************
************************************************************************
B-17
for the 83C751/83C752
CTO BIT(READ) 0D8H ;I2CFG.0 - CLOCK TIMING 0
CT1 BIT(READ) 0D9H ;I2CFG.1 - CLOCK TIMING 1
T1RUN BIT(READ) 0DCH ;I2CFG.4 - START/STOP TIMER 1
MASTRQ BIT(READ) 0DEH ;I2CFG.6 - MASTER I2C
SLAVEN BIT(READ) 0DFH ;I2CFG.7 - SLAVE I2C
CT0 BIT(WRITE)0D8H ;I2CFG.0 - CLOCK TIMING 0
CT1 BIT(WRITE)0D9H ;I2CFG.1 - CLOCK TIMING 1
TIRUN BIT(WRITE)0DCH ;I2CFG.4 - START/STOP TIMER 1
CLRTI BIT(WRITE)0DDH ;I2CFG.5 - CLEAR TIMER 1 INTERRUPT FLAG
MASTRQ BIT(WRITE)0DEH ;I2CFG.6 - MASTER I2C
SLAVEN BIT(WRITE)0DFH ;I2CFG.7 - SLAVE I2C
RSTP BIT(READ) 0F8H ;I2STA.0 - XMIT STOP CONDITION
RSTR BIT(READ) 0F9H ;I2STA.1 - XMIT REPEAT STOP COND.
MAKSTP BIT(READ) 0FAH ;I2STA.2 - STOP CONDITION
MAKSTR BIT(READ) 0FBH ;I2STA.3 - START CONDITION
XACTV BIT(READ) 0FCH ;I2STA.4 - XMIT ACTIVE
XDATA BIT(READ) 0FDH ;I2STA.5 - CONTENT OF XMIT BUFFER
RIDLE BIT(READ) 0FEH ;I2STA.6 - SLAVE IDLE FLAG
************************************************************************
************************************************************************
for the 83C552/80C552
CR0 BIT 0D8H ;S1CON.0 - CLOCK RATE 0
CR1 BIT 0D9H ;S1CON.1 - CLOCK RATE 1
AA BIT 0DAH ;S1CON.2 - ASSERT ACKNOWLEDGE
SI BIT 0DBH ;S1CON.3 - SERIAL I/O INTERRUPT
STO BIT 0DCH ;S1CON.4 - STOP FLAG
STA BIT 0DDH ;S1CON.5 - START FLAG
ENS1 BIT 0DEH ;S1CON.6 - ENABLE SERIAL I/O
ECT0 BIT 0E8H ;IEN1.0 - ENABLE T2 CAPTURE 0
ECT1 BIT 0E9H ;IEN1.1 - ENABLE T2 CAPTURE 1
ECT2 BIT 0EAH ;IEN1.2 - ENABLE T2 CAPTURE 2
ECT3 BIT 0EBH ;IEN1.3 - ENABLE T2 CAPTURE 3
ECM0 BIT 0ECH ;IEN1.4 - ENABLE T2 COMPARATOR 0
ECM1 BIT 0EDH ;IEN1.5 - ENABLE T2 COMPARATOR 1
ECM2 BIT 0EEH ;IEN1.6 - ENABLE T2 COMPARATOR 2
ET2 BIT 0EFH ;IEN1.7 - ENABLE T2 OVERFLOW
PCT0 BIT 0F8H ;IP1.0 - T2 CAPTURE REGISTER 0
PCT1 BIT 0F9H ;IP1.1 - T2 CAPTURE REGISTER 1
PCT2 BIT 0FAH ;IP1.2 - T2 CAPTURE REGISTER 2
PCT3 BIT 0FBH ;IP1.3 - T2 CAPTURE REGISTER 3
PCM0 BIT 0FCH ;IP1.4 - T2 COMPARATOR 0
PCM1 BIT 0FDH ;IP1.5 - T2 COMPARATOR 1
PCM2 BIT 0FEH ;IP1.6 - T2 COMPARATOR 2
PT2 BIT 0FFH ;IP1.7 - T2 OVERFLOW
************************************************************************
B-18
************************************************************************
for the 80C517/80C537
F1 BIT 0D1H ;PSW.1 - FLAG 1
MX0 BIT 0D8H ;ADCON0.0 - ANALOG INPUT CH SELECT BIT 0
MX1 BIT 0D9H ;ADCON0.1 - ANALOG INPUT CH SELECT BIT 1
MX2 BIT 0DAH ;ADCON0.2 - ANALOG INPUT CH SELECT BIT 2
ADM BIT 0DBH ;ADCON0.3 - A/D CONVERSION MODE
BSY BIT 0DCH ;ADCON0.4 - BUSY FLAG
CLK BIT 0DEH ;ADCON0.5 - SYSTEM CLOCK ENABLE
BD BIT 0DFH ;ADCON0.7 - BAUD RATE ENABLE
************************************************************************
************************************************************************
for the 80C154/83C154
ALF BIT 0F8H ;IOCON.0 - CPU POWER DOWN MODE CONTROL
P1F BIT 0F9H ;IOCON.1 - PORT 1 HIGH IMPEDANCE
P2F BIT 0FAH ;IOCON.2 - PORT 2 HIGH IMPEDANCE
P3F BIT 0FBH ;IOCON.3 - PORT 3 HIGH IMPEDANCE
IZC BIT 0FCH ;IOCON.4 - 10K TO 100 K OHM SWITCH (P1-3)
SERR BIT 0FDH ;IOCON.5 - SERIAL PORT RCV ERROR FLAG
T32 BIT 0FEH ;IOCON.6 - 32 BIT TIMER SWITCH
WDT BIT 0FFH ;IOCON.7 - WATCHDOG TIMER CONTROL
*************************************************************************
B-19
APPENDIX C
RESERVED SYMBOLS
The following is a list of reserved symbols used by the Cross
Assembler. These symbols cannot be redefined.
A AB ACALL ADD
ADDC AJMP AND ANL
AR0 AR1 AR2 AR3
AR4 AR5 AR6 AR7
BIT BSEG C CALL
CJNE CLR CODE CPL
CSEG DA DATA DB
DBIT DEC DIV DJNZ
DPTR DS DSEG DW
END EQ EQU GE
GT HIGH IDATA INC
ISEG JB JBC JC
JMP JNB JNC JNZ
JZ LCALL LE LJMP
LOW LT MOD MOV
MOVC MOVX MUL NE
NOP NOT OR ORG
ORL PC POP PUSH
R0 R1 R2 R3
R4 R5 R6 R7
RET RETI RL RLC
RR RRC SET SETB
SHL SHR SJMP SUBB
SWAP USING XCH XCHD
XDATA XOR XRL XSEG
C-1
APPENDIX D
CROSS ASSEMBLER CHARACTER SET
---------------------------+----------------+-------------------
| PRINTABLE | ASCII CODE
CHARACTER NAME | FORM | HEX | DECIMAL
---------------------------+----------------+---------+----------
Horizontal Tab | | 09 | 9
Line Feed | | 0A | 10
Carriage Return | | 0D | 13
Space | | 20 | 32
Exclamation Point | ! | 21 | 33
Pound Sign | # | 23 | 35
Dollar Sign | $ | 24 | 36
Percent Sign | % | 25 | 37
Ampersand | & | 26 | 38
Apostrophe | ' | 27 | 39
Left Parenthesis | ( | 28 | 40
Right Parenthesis | ) | 29 | 41
Asterisk | * | 2A | 42
Plus sign | + | 2B | 43
Comma | , | 2C | 44
Hyphen | - | 2D | 45
Period | . | 2E | 46
Slash | / | 2F | 47
Number 0 | 0 | 30 | 48
" 1 | 1 | 31 | 49
" 2 | 2 | 32 | 50
" 3 | 3 | 33 | 51
" 4 | 4 | 34 | 52
" 5 | 5 | 35 | 53
" 6 | 6 | 36 | 54
" 7 | 7 | 37 | 55
" 8 | 8 | 38 | 56
" 9 | 9 | 39 | 57
Colon | : | 3A | 58
Semi-colon | ; | 3B | 59
Left Angle Bracket | < | 3C | 60
Equal Sign | = | 3D | 61
Right Angle Bracket | > | 3E | 62
Question Mark | ? | 3F | 63
At Sign | @ | 40 | 64
Upper Case A | A | 41 | 65
" " B | B | 42 | 66
" " C | C | 43 | 67
" " D | D | 44 | 68
" " E | E | 45 | 69
" " F | F | 46 | 70
" " G | G | 47 | 71
" " H | H | 48 | 72
D-1
---------------------------+----------------+-------------------
| PRINTABLE | ASCII CODE
CHARACTER NAME | FORM | HEX | DECIMAL
---------------------------+----------------+---------+----------
Upper Case I | I | 49 | 73
" " J | J | 4A | 74
" " K | K | 4B | 75
" " L | L | 4C | 76
" " M | M | 4D | 77
" " N | N | 4E | 78
" " O | O | 4F | 79
" " P | P | 50 | 80
" " Q | Q | 51 | 81
" " R | R | 52 | 82
" " S | S | 53 | 83
" " T | T | 54 | 84
" " U | U | 55 | 85
" " V | V | 56 | 86
" " W | W | 57 | 87
" " X | X | 58 | 88
" " Y | Y | 59 | 89
" " Z | Z | 5A | 90
Underscore | _ | 5F | 95
Lower Case A | a | 61 | 97
" " B | b | 62 | 98
" " C | c | 63 | 99
" " D | d | 64 | 100
" " E | e | 65 | 101
" " F | f | 66 | 102
" " G | g | 67 | 103
" " H | h | 68 | 104
" " I | i | 69 | 105
" " J | j | 6A | 106
" " K | k | 6B | 107
" " L | l | 6C | 108
" " M | m | 6D | 109
" " N | n | 6E | 110
" " O | o | 6F | 111
" " P | p | 70 | 112
" " Q | q | 71 | 113
" " R | r | 72 | 114
" " S | s | 73 | 115
" " T | t | 74 | 116
" " U | u | 75 | 117
" " V | v | 76 | 118
" " W | w | 77 | 119
" " X | x | 78 | 120
" " Y | y | 79 | 121
" " Z | z | 7A | 122
D-2
INDEX
A
ASCII Literals, 2-6
Assembler
Comments, 2-6
Control Description ($), 6-1
Controls, 2-3
Directives, 2-3
Error codes/messages, 8-1
Labels, 2-2
Location Counter, 2-7
Numbers, 2-7
Operators, 2-7
Running it, 3-1
Symbols, 2-1
Syntax Summary, 2-7
B
Bit Addressing, 2-6
C
Character Set, D-1
Comments, 2-6
Control Description ($)
DATE, 6-1
DEBUG, 6-2
EJECT, 6-2
INCLUDE, 6-2
LIST, 6-3
MOD152, 6-3
MOD154, 6-3
MOD252, 6-3
MOD44, 6-3
MOD451, 6-3
MOD452, 6-3
MOD51, 6-3
MOD512, 6-3
MOD515, 6-3
MOD517, 6-3
MOD52, 6-3
MOD521, 6-3
MOD552, 6-3
MOD652, 6-3
MOD751, 6-3
MOD752, 6-3
MOD851, 6-3
NODEBUG, 6-2
NOLIST, 6-3
NOMOD, 6-3
NOOBJECT, 6-5
NOPAGING, 6-5
NOPRINT, 6-6
NOSYMBOLS, 6-6
OBJECT, 6-5
1
PAGELENGTH, 6-5
PAGEWIDTH, 6-6
PAGING, 6-5
PRINT, 6-6
SYMBOLS, 6-6
TITLE, 6-7
Controls
Description, 6-1
Introduction, 2-3, 6-1
D
Directive
Assembler, 2-3
Conditional Assembly, 5-8
Introduction, 5-1
Memory Reservation, 5-5
Miscellaneous, 5-7
Segment Selection, 5-4
Storage, 5-5
Symbol, 5-1
Directives
BIT, 5-2
BSEG, 5-4
CODE, 5-2
CSEG, 5-4
DATA, 5-3
DB, 5-5
DBIT, 5-5
DS, 5-5
DSEG, 5-4
DW, 5-6
ELSE, 5-8
END, 5-8
ENDIF, 5-8
EQU, 5-1
IDATA, 5-3
IF, 5-8
ISEG, 5-4
ORG, 5-7
SET, 5-1
XDATA, 5-3
XSEG, 5-4
E
Error Codes
Explainations, 8-2
Introduction, 8-1
Numerical Listing, 8-2
Executing
Assembler, 3-1
Assembler Example, 3-3
2
F
File
ASM51 Cross Assembler Diskette, 3-1
Object, 2-11
Source Listing, 2-10
Source Listing Sample, A-4
H
Hardware
Requirements, 3-1
I
Instruction
BYT, 4-3
CYC, 4-3
Dest/Source ADDR Mode, 4-2
HEX Opcode, 4-3
Language Form, 4-2
Mnemonics, 2-4, 4-1
Notation, 4-1
Operation, 4-1
PSW, 4-3
Set, 4-4
Introduction
Controls, 6-1
Cross Assembler, 2-1
Directives, 5-1
Error codes/messages, 8-1
Macro Processor, 7-1
L
Labels, 2-2
Location Counter, 2-7
M
Macro
Definition, 7-1
Special Operators, 7-4
Using, Labels, 7-6
Using, Nesting, 7-4
Using them, 7-4
Macro Processor
Introduction, 7-1
Microcontroller
Architecture MCS-51, 1-2
Background MCS-51, 1-1
Supported, 1-4
Mnemonics
MCS-51, 2-4
Notations, 4-1
Summary, 4-4
3
N
Numbers, 2-7
O
Operators, 2-7
Overview
Cross Assembler, 2-1
Symbols, 2-1
P
Program Sample, A-1
R
Reserved Symbols, 2-2
S
Sample program, A-1
Symbols
Directive Definition, 5-1
Labels, 2-2
Overview, 2-1
Reserved, 2-2
Reserved list, C-1
Syntax Summary, 2-7
System
DOS hints, 3-3
4
Reference in New Issue View Git Blame Copy Permalink