o cleanup

packages/efsl-0.3.6/conf/config-linux64.h

@@ -0,0 +1,151 @@
+#ifndef __EFSL_CONFIG_H__
+#define __EFSL_CONFIG_H__
+
+/* Hardware target
+   ---------------
+
+ * Here you will define for what hardware-endpoint EFSL should be compiled.
+ * Look in interfaces.h to see what systems are supported, and add your own
+ * there if you need to write your own driver. Then, define the name you 
+ * selected for your hardware there here. Make sure that you only select one
+ * device!
+*/
+
+	/*#define HW_ENDPOINT_LINUX*/
+	/*#define HW_ENDPOINT_ATMEGA128_SD*/
+	/*#define HW_ENDPOINT_DSP_TI6713_SD*/
+	
+#define MULTIPLE_INTERFACE_SUPPORT
+/*#define HWIFUNC_INIT(x)      lf_init(x)
+#define HWIFUNC_READ(x,y,z)  lf_readBuf(x,y,z)
+#define HWIFUNC_WRITE(x,y,z) lf_writeBuf(x,y,z)
+#define HWIFUNC_HEADER interfaces/linuxfile.h */
+	
+/* Architecture
+   ------------
+
+ * In this section you should configure how large the default variable
+ * types in your system are. This is controlled in types.h in the general
+ * include directory. The selection you make here defines to what the various
+ * e(s|u)int(8,16,32) types will map.
+ * For 32 bit Linux : VARSIZE_LINUX32
+ * For 64 bit Linux : VARSIZE_LINUX64
+ * For AVR's        : VARSIZE_ATMEGA
+ * For TMS67XX      : VARSIZE_TMS67XX
+ */
+ 
+#define VARSIZE_LINUX64
+	
+/* Memory configuration
+   --------------------
+ 
+ * Here you must configure wheter your processor can access memory byte
+ * oriented. All x86 processors can do it, AVR's can do it to. Some DSP
+ * or other microcontrollers can't. If you have an 8 bit system you're safe.
+ * If you are really unsure, leave the setting commented out, it will be slower
+ * but it will work for sure.
+*/
+
+	#define BYTE_ALIGNMENT
+	
+/* Cache configuration
+   -------------------
+   
+ * Here you must configure how much memory of cache you can/want to use.
+ * The number you put at IOMAN_NUMBUFFER is multiplied by 512. So 1 means 
+ * 512 bytes cache, 4 means 2048 bytes cache. More is better.
+ * The number after IOMAN_NUMITERATIONS should be untouched.
+ * The last field (IOMAN_DO_MEMALLOC) is to tell ioman to allocate it's
+ * own memory in it's structure, or not. If you choose to do it yourself
+ * you will have to pass a pointer to the memory as the last argument of
+ * ioman_init.
+*/
+	#define IOMAN_NUMBUFFER 10
+	#define IOMAN_NUMITERATIONS 3
+	#define IOMAN_DO_MEMALLOC
+
+/* Cluster pre-allocation 
+   ----------------------
+   
+ * When writing files, the function that performs the actual write has to
+ * calculate how many clusters it will need for that request. It then allocates
+ * that number of new clusters to the file. Since this involves some 
+ * calculations and writing of the FAT, you might find it beneficial to limit 
+ * the number of allocations, and allow fwrite to pre-allocate a number of 
+ * clusters extra. This setting determines how many clusters will be extra 
+ * allocated whenever this is required.
+ * Take in carefull consideration how large your clustersize is, putting 10 here
+ * with a clustersize of 32kb means you might waste 320 kb.
+ * The first option is for preallocating files, the other is used when enlarging
+ * a directory to accomodate more files
+*/
+      #define CLUSTER_PREALLOC_FILE 5
+      #define CLUSTER_PREALLOC_DIRECTORY 2
+
+/* Endianess configuration
+   -----------------------
+   
+ * Here you can configure wheter your architecture is little or big endian. This
+ * is important since all FAT structures are stored in intel little endian 
+ * order. So if you have a big endian system the library has to convert all 
+ * figures to big endian in order to work.
+ */
+	/*#define HOST_BIG_ENDIAN*/
+	#define HOST_LITTLE_ENDIAN
+	
+/* Date and Time support
+   ---------------------
+   
+ * Here you can enable or disable date and time support. If you enable
+ * it you will have to create 6 functions, that are described in the
+ * EFSL manual. If the functions are not present when linking your
+ * program with the library you will get unresolved dependencies.
+ */ 
+ 	/* #define DATE_TIME_SUPPORT */
+
+/* Error reporting support
+   -----------------------
+   
+ * When you receive an error in userland, it usually only gives limited
+ * information (most likely, fail or success). If error detection and
+ * reporting is important for you, you can enable more detailed error
+ * reporting here. This is optional, the costs are 1 byte per object,
+ * and a small increase in code size.
+ * You can enable error recording for all object, or you can select the
+ * object manually.
+ * For full error reporting use FULL_ERROR_SUPPORT
+ * For only the base-core of the library use BASE_ERROR_SUPPORT
+ * For IO/Man use ERRSUP_IOMAN
+ * For Disc   use ERRSUP_IOMAN
+ * For Part   use ERRSUP_PARTITION
+ * For Fs     use ERRSUP_FILESYSTEM
+ * For File   use ERRSUP_FILE
+*/
+
+	#define FULL_ERROR_SUPPORT
+	/*#define BASE_ERROR_SUPPORT*/
+ 
+
+/* Debugging configuration
+   -----------------------
+   
+ * Here you can configure the debugging behaviour. Debugging is different
+ * on every platform (see debug.h for more information). 
+ * If your hardware has no means of output (printf) dont define any anything, 
+ * and nothing will happen. For real world use debugging should be turned off.
+*/
+
+	/*#define DEBUG*/
+	/*#define DO_FUNC_DEBUG*/
+
+/* List options 
+   ------------
+   
+ * In this section you can configure what kind of data you will get from
+ * directory listing requests. Please refer to the documentation for
+ * more information
+*/
+
+	#define LIST_MAXLENFILENAME 12
+
+#endif