godzil/quickdev16
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

fix usb reconnect

Browse Source
This commit is contained in:
David Voswinkel
2009-06-23 19:33:11 +02:00
parent 925c54a9c6
commit f3cc60e77b
5 changed files with 326 additions and 89 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
avr/usbload/usbconfig.h
View File

@@ -56,13 +56,13 @@ section at the end of this file).
/* ----------------------- Optional Hardware Config ------------------------ */
#define USB_CFG_PULLUP_IOPORTNAME D
//#define USB_CFG_PULLUP_IOPORTNAME D
/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
* V+, you can connect and disconnect the device from firmware by calling
* the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
* This constant defines the port on which the pullup resistor is connected.
*/
#define USB_CFG_PULLUP_BIT 6
//#define USB_CFG_PULLUP_BIT 6
/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
* above) where the 1.5k pullup resistor is connected. See description
* above for details.
@@ -206,7 +206,7 @@ section at the end of this file).
* own Vendor ID, define it here. Otherwise you use one of obdev's free shared
* VID/PID pairs. Be sure to read USBID-License.txt for rules!
*/
#define USB_CFG_DEVICE_ID 0xdc, 0x05
#define USB_CFG_DEVICE_ID 0xdd, 0x05
/* This is the ID of the product, low byte first. It is interpreted in the
* scope of the vendor ID. If you have registered your own VID with usb.org
* or if you have licensed a PID from somebody else, define it here. Otherwise