godzil/sd2snes
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

FPGA: add missing IP core files

Browse Source
This commit is contained in:
ikari 2011-06-11 23:55:24 +02:00
parent 344fa362be
commit 1717bf942b
5 changed files with 439 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

101
verilog/sd2snes/ipcore_dir/dac_buf.xco Normal file
View File

@ -0,0 +1,101 @@
##############################################################
#
# Xilinx Core Generator version 13.1
# Date: Thu Jun 2 00:39:53 2011
#
##############################################################
#
# This file contains the customisation parameters for a
# Xilinx CORE Generator IP GUI. It is strongly recommended
# that you do not manually alter this file as it may cause
# unexpected and unsupported behavior.
#
##############################################################
#
# BEGIN Project Options
SET addpads = false
SET asysymbol = true
SET busformat = BusFormatAngleBracketNotRipped
SET createndf = false
SET designentry = Advanced
SET device = xc3s400
SET devicefamily = spartan3
SET flowvendor = Foundation_ISE
SET formalverification = false
SET foundationsym = false
SET implementationfiletype = Ngc
SET package = pq208
SET removerpms = false
SET simulationfiles = Behavioral
SET speedgrade = -4
SET verilogsim = true
SET vhdlsim = true
# END Project Options
# BEGIN Select
SELECT Block_Memory_Generator xilinx.com:ip:blk_mem_gen:6.1
# END Select
# BEGIN Parameters
CSET additional_inputs_for_power_estimation=false
CSET algorithm=Minimum_Area
CSET assume_synchronous_clk=true
CSET axi_id_width=4
CSET axi_slave_type=Memory_Slave
CSET axi_type=AXI4_Full
CSET byte_size=9
CSET coe_file=no_coe_file_loaded
CSET collision_warnings=ALL
CSET component_name=dac_buf
CSET disable_collision_warnings=false
CSET disable_out_of_range_warnings=false
CSET ecc=false
CSET ecctype=No_ECC
CSET enable_a=Always_Enabled
CSET enable_b=Always_Enabled
CSET error_injection_type=Single_Bit_Error_Injection
CSET fill_remaining_memory_locations=false
CSET interface_type=Native
CSET load_init_file=false
CSET memory_type=Simple_Dual_Port_RAM
CSET operating_mode_a=WRITE_FIRST
CSET operating_mode_b=WRITE_FIRST
CSET output_reset_value_a=0
CSET output_reset_value_b=0
CSET pipeline_stages=0
CSET port_a_clock=100
CSET port_a_enable_rate=100
CSET port_a_write_rate=50
CSET port_b_clock=100
CSET port_b_enable_rate=100
CSET port_b_write_rate=0
CSET primitive=8kx2
CSET read_width_a=8
CSET read_width_b=32
CSET register_porta_input_of_softecc=false
CSET register_porta_output_of_memory_core=false
CSET register_porta_output_of_memory_primitives=false
CSET register_portb_output_of_memory_core=false
CSET register_portb_output_of_memory_primitives=false
CSET register_portb_output_of_softecc=false
CSET remaining_memory_locations=0
CSET reset_memory_latch_a=false
CSET reset_memory_latch_b=false
CSET reset_priority_a=CE
CSET reset_priority_b=CE
CSET reset_type=SYNC
CSET softecc=false
CSET use_axi_id=false
CSET use_byte_write_enable=false
CSET use_error_injection_pins=false
CSET use_regcea_pin=false
CSET use_regceb_pin=false
CSET use_rsta_pin=false
CSET use_rstb_pin=false
CSET write_depth_a=2048
CSET write_width_a=8
CSET write_width_b=32
# END Parameters
# BEGIN Extra information
MISC pkg_timestamp=2011-02-03T22:20:43.000Z
# END Extra information
GENERATE
# CRC: 70eef295

101
verilog/sd2snes/ipcore_dir/msu_databuf.xco Normal file
View File

@ -0,0 +1,101 @@
##############################################################
#
# Xilinx Core Generator version 13.1
# Date: Thu Jun 2 00:41:09 2011
#
##############################################################
#
# This file contains the customisation parameters for a
# Xilinx CORE Generator IP GUI. It is strongly recommended
# that you do not manually alter this file as it may cause
# unexpected and unsupported behavior.
#
##############################################################
#
# BEGIN Project Options
SET addpads = false
SET asysymbol = true
SET busformat = BusFormatAngleBracketNotRipped
SET createndf = false
SET designentry = Advanced
SET device = xc3s400
SET devicefamily = spartan3
SET flowvendor = Foundation_ISE
SET formalverification = false
SET foundationsym = false
SET implementationfiletype = Ngc
SET package = pq208
SET removerpms = false
SET simulationfiles = Behavioral
SET speedgrade = -4
SET verilogsim = true
SET vhdlsim = true
# END Project Options
# BEGIN Select
SELECT Block_Memory_Generator xilinx.com:ip:blk_mem_gen:6.1
# END Select
# BEGIN Parameters
CSET additional_inputs_for_power_estimation=false
CSET algorithm=Minimum_Area
CSET assume_synchronous_clk=true
CSET axi_id_width=4
CSET axi_slave_type=Memory_Slave
CSET axi_type=AXI4_Full
CSET byte_size=9
CSET coe_file=no_coe_file_loaded
CSET collision_warnings=ALL
CSET component_name=msu_databuf
CSET disable_collision_warnings=false
CSET disable_out_of_range_warnings=false
CSET ecc=false
CSET ecctype=No_ECC
CSET enable_a=Always_Enabled
CSET enable_b=Always_Enabled
CSET error_injection_type=Single_Bit_Error_Injection
CSET fill_remaining_memory_locations=false
CSET interface_type=Native
CSET load_init_file=false
CSET memory_type=Simple_Dual_Port_RAM
CSET operating_mode_a=WRITE_FIRST
CSET operating_mode_b=WRITE_FIRST
CSET output_reset_value_a=0
CSET output_reset_value_b=0
CSET pipeline_stages=0
CSET port_a_clock=100
CSET port_a_enable_rate=100
CSET port_a_write_rate=50
CSET port_b_clock=100
CSET port_b_enable_rate=100
CSET port_b_write_rate=0
CSET primitive=8kx2
CSET read_width_a=8
CSET read_width_b=8
CSET register_porta_input_of_softecc=false
CSET register_porta_output_of_memory_core=false
CSET register_porta_output_of_memory_primitives=false
CSET register_portb_output_of_memory_core=false
CSET register_portb_output_of_memory_primitives=false
CSET register_portb_output_of_softecc=false
CSET remaining_memory_locations=0
CSET reset_memory_latch_a=false
CSET reset_memory_latch_b=false
CSET reset_priority_a=CE
CSET reset_priority_b=CE
CSET reset_type=SYNC
CSET softecc=false
CSET use_axi_id=false
CSET use_byte_write_enable=false
CSET use_error_injection_pins=false
CSET use_regcea_pin=false
CSET use_regceb_pin=false
CSET use_rsta_pin=false
CSET use_rstb_pin=false
CSET write_depth_a=16384
CSET write_width_a=8
CSET write_width_b=8
# END Parameters
# BEGIN Extra information
MISC pkg_timestamp=2011-02-03T22:20:43.000Z
# END Extra information
GENERATE
# CRC: eabbe14d

79
verilog/sd2snes/ipcore_dir/upd77c25_datram.xise Normal file
View File

@ -0,0 +1,79 @@
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
<header>
<!-- ISE source project file created by Project Navigator. -->
<!-- -->
<!-- This file contains project source information including a list of -->
<!-- project source files, project and process properties. This file, -->
<!-- along with the project source files, is sufficient to open and -->
<!-- implement in ISE Project Navigator. -->
<!-- -->
<!-- Copyright (c) 1995-2011 Xilinx, Inc. All rights reserved. -->
</header>
<version xil_pn:ise_version="13.1" xil_pn:schema_version="2"/>
<files>
<file xil_pn:name="upd77c25_datram.ngc" xil_pn:type="FILE_NGC">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="3"/>
<association xil_pn:name="Implementation" xil_pn:seqID="3"/>
</file>
<file xil_pn:name="upd77c25_datram.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="5"/>
<association xil_pn:name="Implementation" xil_pn:seqID="5"/>
<association xil_pn:name="PostMapSimulation" xil_pn:seqID="5"/>
<association xil_pn:name="PostRouteSimulation" xil_pn:seqID="5"/>
<association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="5"/>
</file>
<file xil_pn:name="upd77c25_datram.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="7"/>
<association xil_pn:name="Implementation" xil_pn:seqID="7"/>
<association xil_pn:name="PostMapSimulation" xil_pn:seqID="7"/>
<association xil_pn:name="PostRouteSimulation" xil_pn:seqID="7"/>
<association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="7"/>
</file>
</files>
<properties>
<property xil_pn:name="Auto Implementation Top" xil_pn:value="false" xil_pn:valueState="non-default"/>
<property xil_pn:name="Device" xil_pn:value="xc3s400" xil_pn:valueState="non-default"/>
<property xil_pn:name="Device Family" xil_pn:value="Spartan3" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Stop View" xil_pn:value="PreSynthesis" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top" xil_pn:value="Architecture|upd77c25_datram|upd77c25_datram_a" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top File" xil_pn:value="upd77c25_datram.vhd" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top Instance Path" xil_pn:value="/upd77c25_datram" xil_pn:valueState="non-default"/>
<property xil_pn:name="Package" xil_pn:value="pq208" xil_pn:valueState="default"/>
<property xil_pn:name="Preferred Language" xil_pn:value="Verilog" xil_pn:valueState="default"/>
<property xil_pn:name="Project Generator" xil_pn:value="CoreGen" xil_pn:valueState="non-default"/>
<property xil_pn:name="Property Specification in Project File" xil_pn:value="Store all values" xil_pn:valueState="default"/>
<property xil_pn:name="Simulator" xil_pn:value="ISim (VHDL/Verilog)" xil_pn:valueState="default"/>
<property xil_pn:name="Speed Grade" xil_pn:value="-4" xil_pn:valueState="non-default"/>
<property xil_pn:name="Synthesis Tool" xil_pn:value="XST (VHDL/Verilog)" xil_pn:valueState="default"/>
<property xil_pn:name="Top-Level Source Type" xil_pn:value="HDL" xil_pn:valueState="default"/>
<property xil_pn:name="Working Directory" xil_pn:value="." xil_pn:valueState="non-default"/>
<!-- -->
<!-- The following properties are for internal use only. These should not be modified.-->
<!-- -->
<property xil_pn:name="PROP_DesignName" xil_pn:value="upd77c25_datram" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_DevFamilyPMName" xil_pn:value="spartan3" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_intProjectCreationTimestamp" xil_pn:value="2011-06-02T02:44:44" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWbtProjectID" xil_pn:value="5247F245DC669D55BA9C67DF111B1080" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWorkingDirLocWRTProjDir" xil_pn:value="Same" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWorkingDirUsed" xil_pn:value="No" xil_pn:valueState="non-default"/>
</properties>
<bindings/>
<libraries/>
<autoManagedFiles>
<!-- The following files are identified by `include statements in verilog -->
<!-- source files and are automatically managed by Project Navigator. -->
<!-- -->
<!-- Do not hand-edit this section, as it will be overwritten when the -->
<!-- project is analyzed based on files automatically identified as -->
<!-- include files. -->
</autoManagedFiles>
</project>

79
verilog/sd2snes/ipcore_dir/upd77c25_datrom.xise Normal file
View File

@ -0,0 +1,79 @@
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
<header>
<!-- ISE source project file created by Project Navigator. -->
<!-- -->
<!-- This file contains project source information including a list of -->
<!-- project source files, project and process properties. This file, -->
<!-- along with the project source files, is sufficient to open and -->
<!-- implement in ISE Project Navigator. -->
<!-- -->
<!-- Copyright (c) 1995-2011 Xilinx, Inc. All rights reserved. -->
</header>
<version xil_pn:ise_version="13.1" xil_pn:schema_version="2"/>
<files>
<file xil_pn:name="upd77c25_datrom.ngc" xil_pn:type="FILE_NGC">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="3"/>
<association xil_pn:name="Implementation" xil_pn:seqID="3"/>
</file>
<file xil_pn:name="upd77c25_datrom.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="5"/>
<association xil_pn:name="Implementation" xil_pn:seqID="5"/>
<association xil_pn:name="PostMapSimulation" xil_pn:seqID="5"/>
<association xil_pn:name="PostRouteSimulation" xil_pn:seqID="5"/>
<association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="5"/>
</file>
<file xil_pn:name="upd77c25_datrom.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="7"/>
<association xil_pn:name="Implementation" xil_pn:seqID="7"/>
<association xil_pn:name="PostMapSimulation" xil_pn:seqID="7"/>
<association xil_pn:name="PostRouteSimulation" xil_pn:seqID="7"/>
<association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="7"/>
</file>
</files>
<properties>
<property xil_pn:name="Auto Implementation Top" xil_pn:value="false" xil_pn:valueState="non-default"/>
<property xil_pn:name="Device" xil_pn:value="xc3s400" xil_pn:valueState="non-default"/>
<property xil_pn:name="Device Family" xil_pn:value="Spartan3" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Stop View" xil_pn:value="PreSynthesis" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top" xil_pn:value="Architecture|upd77c25_datrom|upd77c25_datrom_a" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top File" xil_pn:value="upd77c25_datrom.vhd" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top Instance Path" xil_pn:value="/upd77c25_datrom" xil_pn:valueState="non-default"/>
<property xil_pn:name="Package" xil_pn:value="pq208" xil_pn:valueState="default"/>
<property xil_pn:name="Preferred Language" xil_pn:value="Verilog" xil_pn:valueState="default"/>
<property xil_pn:name="Project Generator" xil_pn:value="CoreGen" xil_pn:valueState="non-default"/>
<property xil_pn:name="Property Specification in Project File" xil_pn:value="Store all values" xil_pn:valueState="default"/>
<property xil_pn:name="Simulator" xil_pn:value="ISim (VHDL/Verilog)" xil_pn:valueState="default"/>
<property xil_pn:name="Speed Grade" xil_pn:value="-4" xil_pn:valueState="non-default"/>
<property xil_pn:name="Synthesis Tool" xil_pn:value="XST (VHDL/Verilog)" xil_pn:valueState="default"/>
<property xil_pn:name="Top-Level Source Type" xil_pn:value="HDL" xil_pn:valueState="default"/>
<property xil_pn:name="Working Directory" xil_pn:value="." xil_pn:valueState="non-default"/>
<!-- -->
<!-- The following properties are for internal use only. These should not be modified.-->
<!-- -->
<property xil_pn:name="PROP_DesignName" xil_pn:value="upd77c25_datrom" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_DevFamilyPMName" xil_pn:value="spartan3" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_intProjectCreationTimestamp" xil_pn:value="2011-06-09T12:20:38" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWbtProjectID" xil_pn:value="B24E105884805347406B2EAE26162387" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWorkingDirLocWRTProjDir" xil_pn:value="Same" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWorkingDirUsed" xil_pn:value="No" xil_pn:valueState="non-default"/>
</properties>
<bindings/>
<libraries/>
<autoManagedFiles>
<!-- The following files are identified by `include statements in verilog -->
<!-- source files and are automatically managed by Project Navigator. -->
<!-- -->
<!-- Do not hand-edit this section, as it will be overwritten when the -->
<!-- project is analyzed based on files automatically identified as -->
<!-- include files. -->
</autoManagedFiles>
</project>

79
verilog/sd2snes/ipcore_dir/upd77c25_pgmrom.xise Normal file
View File

@ -0,0 +1,79 @@
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
<header>
<!-- ISE source project file created by Project Navigator. -->
<!-- -->
<!-- This file contains project source information including a list of -->
<!-- project source files, project and process properties. This file, -->
<!-- along with the project source files, is sufficient to open and -->
<!-- implement in ISE Project Navigator. -->
<!-- -->
<!-- Copyright (c) 1995-2011 Xilinx, Inc. All rights reserved. -->
</header>
<version xil_pn:ise_version="13.1" xil_pn:schema_version="2"/>
<files>
<file xil_pn:name="upd77c25_pgmrom.ngc" xil_pn:type="FILE_NGC">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="3"/>
<association xil_pn:name="Implementation" xil_pn:seqID="3"/>
</file>
<file xil_pn:name="upd77c25_pgmrom.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="5"/>
<association xil_pn:name="Implementation" xil_pn:seqID="5"/>
<association xil_pn:name="PostMapSimulation" xil_pn:seqID="5"/>
<association xil_pn:name="PostRouteSimulation" xil_pn:seqID="5"/>
<association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="5"/>
</file>
<file xil_pn:name="upd77c25_pgmrom.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="7"/>
<association xil_pn:name="Implementation" xil_pn:seqID="7"/>
<association xil_pn:name="PostMapSimulation" xil_pn:seqID="7"/>
<association xil_pn:name="PostRouteSimulation" xil_pn:seqID="7"/>
<association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="7"/>
</file>
</files>
<properties>
<property xil_pn:name="Auto Implementation Top" xil_pn:value="false" xil_pn:valueState="non-default"/>
<property xil_pn:name="Device" xil_pn:value="xc3s400" xil_pn:valueState="non-default"/>
<property xil_pn:name="Device Family" xil_pn:value="Spartan3" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Stop View" xil_pn:value="PreSynthesis" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top" xil_pn:value="Architecture|upd77c25_pgmrom|upd77c25_pgmrom_a" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top File" xil_pn:value="upd77c25_pgmrom.vhd" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top Instance Path" xil_pn:value="/upd77c25_pgmrom" xil_pn:valueState="non-default"/>
<property xil_pn:name="Package" xil_pn:value="pq208" xil_pn:valueState="default"/>
<property xil_pn:name="Preferred Language" xil_pn:value="Verilog" xil_pn:valueState="default"/>
<property xil_pn:name="Project Generator" xil_pn:value="CoreGen" xil_pn:valueState="non-default"/>
<property xil_pn:name="Property Specification in Project File" xil_pn:value="Store all values" xil_pn:valueState="default"/>
<property xil_pn:name="Simulator" xil_pn:value="ISim (VHDL/Verilog)" xil_pn:valueState="default"/>
<property xil_pn:name="Speed Grade" xil_pn:value="-4" xil_pn:valueState="non-default"/>
<property xil_pn:name="Synthesis Tool" xil_pn:value="XST (VHDL/Verilog)" xil_pn:valueState="default"/>
<property xil_pn:name="Top-Level Source Type" xil_pn:value="HDL" xil_pn:valueState="default"/>
<property xil_pn:name="Working Directory" xil_pn:value="." xil_pn:valueState="non-default"/>
<!-- -->
<!-- The following properties are for internal use only. These should not be modified.-->
<!-- -->
<property xil_pn:name="PROP_DesignName" xil_pn:value="upd77c25_pgmrom" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_DevFamilyPMName" xil_pn:value="spartan3" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_intProjectCreationTimestamp" xil_pn:value="2011-06-09T10:59:21" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWbtProjectID" xil_pn:value="92401B0F8DC628848EF92C534EB4C9BB" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWorkingDirLocWRTProjDir" xil_pn:value="Same" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWorkingDirUsed" xil_pn:value="No" xil_pn:valueState="non-default"/>
</properties>
<bindings/>
<libraries/>
<autoManagedFiles>
<!-- The following files are identified by `include statements in verilog -->
<!-- source files and are automatically managed by Project Navigator. -->
<!-- -->
<!-- Do not hand-edit this section, as it will be overwritten when the -->
<!-- project is analyzed based on files automatically identified as -->
<!-- include files. -->
</autoManagedFiles>
</project>