Firmware/bootldr: size reduction and stability measures

src/bootldr/clock.c

@@ -14,8 +14,8 @@ void clock_disconnect() {
 
 void clock_init() {
 
-/* set flash access time to 5 clks (80<f<=100MHz) */
-  setFlashAccessTime(5);
+/* set flash access time to 6 clks (safe setting) */
+  setFlashAccessTime(6);
 
 /* setup PLL0 for ~44100*256*8 Hz
    Base clock: 12MHz

src/bootldr/config.h

@@ -56,7 +56,7 @@
 #define CONFIG_UART_PCLKDIV       1
 #define CONFIG_UART_TX_BUF_SHIFT  8
 #define CONFIG_UART_BAUDRATE      921600
-//#define CONFIG_UART_DEADLOCKABLE
+#define CONFIG_UART_DEADLOCKABLE
 
 #define SSP_CLK_DIVISOR_FAST 2
 #define SSP_CLK_DIVISOR_SLOW 250

src/bootldr/ffconf.h

@@ -14,7 +14,7 @@
 / Function and Buffer Configurations
 /----------------------------------------------------------------------------*/
 
-#define	_FS_TINY	0		/* 0:Normal or 1:Tiny */
+#define	_FS_TINY	1		/* 0:Normal or 1:Tiny */
 /* When _FS_TINY is set to 1, FatFs uses the sector buffer in the file system
 /  object instead of the sector buffer in the individual file object for file
 /  data transfer. This reduces memory consumption 512 bytes each file object. */
@@ -57,7 +57,7 @@
 / Locale and Namespace Configurations
 /----------------------------------------------------------------------------*/
 
-#define _CODE_PAGE	1252
+#define _CODE_PAGE	1
 /* The _CODE_PAGE specifies the OEM code page to be used on the target system.
 /  Incorrect setting of the code page can cause a file open failure.
 /

src/bootldr/iap.c

@@ -72,10 +72,12 @@ FLASH_RES check_flash() {
 }
 
 IAP_RES iap_wrap(uint32_t *iap_cmd, uint32_t *iap_res) {
-  NVIC_DisableIRQ(RIT_IRQn);
-  NVIC_DisableIRQ(UART_IRQ);
+//  NVIC_DisableIRQ(RIT_IRQn);
+//  NVIC_DisableIRQ(UART_IRQ);
+  for(volatile int i=0; i<2048; i++);
   iap_entry(iap_cmd, iap_res);
-  NVIC_EnableIRQ(UART_IRQ);
+  for(volatile int i=0; i<2048; i++);
+//  NVIC_EnableIRQ(UART_IRQ);
   return iap_res[0];
 }
 
@@ -153,12 +155,16 @@ FLASH_RES flash_file(uint8_t *filename) {
 
     writeled(1);
     DBG_BL printf("erasing flash...\n");
+    DBG_UART uart_putc('P');
     if((res = iap_prepare_for_write(FW_START / 0x1000, FLASH_SECTORS)) != CMD_SUCCESS) {
       DBG_BL printf("error %ld while preparing for erase\n", res);
+      DBG_UART uart_putc('X');
       return ERR_FLASHPREP;
     };
+    DBG_UART uart_putc('E');
     if((res = iap_erase(FW_START / 0x1000, FLASH_SECTORS)) != CMD_SUCCESS) {
       DBG_BL printf("error %ld while erasing\n", res);
+      DBG_UART uart_putc('X');
       return ERR_FLASHERASE;
     }
     DBG_BL printf("writing... @%08lx\n", flash_addr);
@@ -174,18 +180,23 @@ FLASH_RES flash_file(uint8_t *filename) {
       DBG_BL printf("current_sec=%d flash_addr=%08lx\n", current_sec, flash_addr);
       DBG_UART uart_putc('.');
       if(current_sec < (FW_START / 0x1000)) return ERR_FLASH;
+      DBG_UART uart_putc(current_sec["0123456789ABCDEFGH"]);
+      DBG_UART uart_putc('p');
       if((res = iap_prepare_for_write(current_sec, current_sec)) != CMD_SUCCESS) {
         DBG_BL printf("error %ld while preparing sector %d for write\n", res, current_sec);
+        DBG_UART uart_putc('X');
         return ERR_FLASH;
       }
+      DBG_UART uart_putc('w');
       if((res = iap_ram2flash(flash_addr, file_buf, 512)) != CMD_SUCCESS) {
         DBG_BL printf("error %ld while writing to address %08lx (sector %d)\n", res, flash_addr, current_sec);
+        DBG_UART uart_putc('X');
         return ERR_FLASH;
       }
     }
     if(total_read != (file_header.size + 0x100)) {
       DBG_BL printf("wrote less data than expected! (%08lx vs. %08lx)\n", total_read, file_header.size);
-      DBG_UART uart_putc('X');
+//      DBG_UART uart_putc('X');
       return ERR_FILECHK;
     }
     writeled(0);

src/bootldr/timer.c

@@ -18,32 +18,6 @@ extern volatile int sd_changed;
 volatile tick_t ticks;
 volatile int wokefromrit;
 
-void __attribute__((weak,noinline)) SysTick_Hook(void) {
-  /* Empty function for hooking the systick handler */
-}
-
-/* Systick interrupt handler */
-void SysTick_Handler(void) {
-  ticks++;
-  static uint16_t sdch_state = 0;
-  sdch_state = (sdch_state << 1) | SDCARD_DETECT | 0xe000;
-  if((sdch_state == 0xf000) || (sdch_state == 0xefff)) {
-    sd_changed = 1;
-  }
-  sdn_changed();
-  SysTick_Hook();
-}
-
-void __attribute__((weak,noinline)) RIT_Hook(void) {
-}
-
-void RIT_IRQHandler(void) {
-  LPC_RIT->RICTRL = BV(RITINT);
-  NVIC_ClearPendingIRQ(RIT_IRQn);
-  wokefromrit = 1;
-  RIT_Hook();
-}
-
 void timer_init(void) {
   /* turn on power to RIT */
   BITBAND(LPC_SC->PCONP, PCRIT) = 1;
@@ -54,8 +28,6 @@ void timer_init(void) {
   /* PCLK = CCLK */
   BITBAND(LPC_SC->PCLKSEL1, 26) = 1;
   BITBAND(LPC_SC->PCLKSEL1, PCLK_TIMER3) = 1;
-  /* enable SysTick */
-  SysTick_Config((SysTick->CALIB & SysTick_CALIB_TENMS_Msk));
 }
 
 void delay_us(unsigned int time) {
@@ -84,21 +56,3 @@ void delay_ms(unsigned int time) {
   LPC_RIT->RICTRL = 0;
 }
 
-void sleep_ms(unsigned int time) {
-
-  wokefromrit = 0;
-  /* Prepare RIT */
-  LPC_RIT->RICOUNTER = 0;
-  LPC_RIT->RICOMPVAL = (CONFIG_CPU_FREQUENCY / 1000) * time;
-  LPC_RIT->RICTRL    = BV(RITEN) | BV(RITINT);
-  NVIC_EnableIRQ(RIT_IRQn);
-
-  /* Wait until RIT signals an interrupt */
-//uart_putc(';');
-  while(!wokefromrit) {
-    __WFI();
-  }
-  NVIC_DisableIRQ(RIT_IRQn);
-  /* Disable RIT */
-  LPC_RIT->RICTRL = BV(RITINT);
-}

src/bootldr/uart.c

@@ -74,65 +74,14 @@
   }
 }
 */
-static char txbuf[1 << CONFIG_UART_TX_BUF_SHIFT];
+//static char txbuf[1 << CONFIG_UART_TX_BUF_SHIFT];
 static volatile unsigned int read_idx,write_idx;
 
-void UART_HANDLER(void) {
-  int iir = UART_REGS->IIR;
-  if (!(iir & 1)) {
-    /* Interrupt is pending */
-    switch (iir & 14) {
-#if CONFIG_UART_NUM == 1
-    case 0: /* modem status */
-      (void) UART_REGS->MSR; // dummy read to clear
-      break;
-#endif
-
-    case 2: /* THR empty - send */
-      if (read_idx != write_idx) {
-        int maxchars = 16;
-        while (read_idx != write_idx && --maxchars > 0) {
-          UART_REGS->THR = (unsigned char)txbuf[read_idx];
-          read_idx = (read_idx+1) & (sizeof(txbuf)-1);
-        }
-        if (read_idx == write_idx) {
-          /* buffer empty - turn off THRE interrupt */
-          BITBAND(UART_REGS->IER, 1) = 0;
-        }
-      }
-      break;
-      
-    case 12: /* RX timeout */
-    case  4: /* data received - not implemented yet */
-      (void) UART_REGS->RBR; // dummy read to clear
-      break;
-
-    case 6: /* RX error */
-      (void) UART_REGS->LSR; // dummy read to clear
-
-    default: break;
-    }
-  }
-}
-
 void uart_putc(char c) {
   if (c == '\n')
     uart_putc('\r');
-
-  unsigned int tmp = (write_idx+1) & (sizeof(txbuf)-1) ;
-
-  if (read_idx == write_idx && (BITBAND(UART_REGS->LSR, 5))) {
-    /* buffer empty, THR empty -> send immediately */
-    UART_REGS->THR = (unsigned char)c;
-  } else {
-#ifdef CONFIG_UART_DEADLOCKABLE
-    while (tmp == read_idx) ;
-#endif
-    BITBAND(UART_REGS->IER, 1) = 0; // turn off UART interrupt
-    txbuf[write_idx] = c;
-    write_idx = tmp;
-    BITBAND(UART_REGS->IER, 1) = 1;
-  }
+  while(!(UART_REGS->LSR & (0x20)));
+  UART_REGS->THR = c;
 }
 
 /* Polling version only */
@@ -183,10 +132,6 @@ void uart_init(void) {
   /* reset and enable FIFO */
   UART_REGS->FCR = BV(0);
 
-  /* enable transmit interrupt */
-  BITBAND(UART_REGS->IER, 1) = 1;
-  NVIC_EnableIRQ(UART_IRQ);
-
   UART_REGS->THR = '?';
 }