diff --git a/mk/build.common.mk b/mk/build.common.mk
deleted file mode 100644
index c099e53..0000000
--- a/mk/build.common.mk
+++ /dev/null
@@ -1,65 +0,0 @@
-#
-# Copyright (c) 2001-2009 Hypertriton, Inc.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-# USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#
-# Generic defines common to all BSDBuild libraries.
-#
-
-PREFIX?= /usr/local
-DESTDIR?=
-LOCALSTATEDIR?= ${PREFIX}/share
-SYSCONFDIR?= ${PREFIX}/etc
-SHAREDIR?= ${PREFIX}/share
-BINDIR?= ${PREFIX}/bin
-LIBDIR?= ${PREFIX}/lib
-INCLDIR?= ${PREFIX}/include
-MANDIR?= ${PREFIX}/man
-PSDIR?= ${PREFIX}/man
-
-SUDO?=
-SH?= sh
-FIND?= find
-AWK?= awk
-
-INSTALL_PROG= install -c -m 755
-INSTALL_LIB= install -c -m 644
-INSTALL_DATA= install -c -m 644
-INSTALL_INCL= install -c -m 644
-
-INSTALL_PROG_DIR= mkdir -p
-INSTALL_LIB_DIR= mkdir -p
-INSTALL_DATA_DIR= mkdir -p
-INSTALL_INCL_DIR= mkdir -p
-INSTALL_MAN_DIR= mkdir -p
-INSTALL_PS_DIR= mkdir -p
-
-DEINSTALL_PROG= rm -f
-DEINSTALL_LIB= rm -f
-DEINSTALL_DATA= rm -f
-DEINSTALL_INCL= rm -f
-
-DEINSTALL_PROG_DIR= rmdir -p
-DEINSTALL_LIB_DIR= rmdir -p
-DEINSTALL_DATA_DIR= rmdir -p
-DEINSTALL_INCL_DIR= rmdir -p
diff --git a/mk/build.dep.mk b/mk/build.dep.mk
deleted file mode 100644
index 1272e51..0000000
--- a/mk/build.dep.mk
+++ /dev/null
@@ -1,47 +0,0 @@
-#
-# Copyright (c) 2001-2007 Hypertriton, Inc.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-# USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#
-# Get object file dependency information from the compiler.
-#
-
-MKDEP= sh ${TOP}/mk/mkdep
-CC?= cc
-
-depend: ${DPADD} depend-subdir
- @echo > .depend
- @files="${SRCS}"; \
- if [ "$$files" != "" -a "$$files" != "none" ]; then \
- if [ "${BUILD}" != "" ]; then \
- env CC=${CC} ${MKDEP} ${CFLAGS} -I${BUILD} $$files; \
- env CC=${CC} ${MKDEP} -a -l ${CFLAGS} -I${BUILD} $$files; \
- else \
- env CC=${CC} ${MKDEP} ${CFLAGS} $$files; \
- env CC=${CC} ${MKDEP} -a -l ${CFLAGS} $$files; \
- fi; \
- fi
-
-clean-depend:
- echo > .depend
-
diff --git a/mk/build.prog.mk b/mk/build.prog.mk
deleted file mode 100644
index 3d33541..0000000
--- a/mk/build.prog.mk
+++ /dev/null
@@ -1,410 +0,0 @@
-#
-# Copyright (c) 2001-2009 Hypertriton, Inc.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-# USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#
-# Compile executables from source.
-#
-
-PROG?=
-GMONOUT?= gmon.out
-WINRES?=
-
-CC?= cc
-ASM?= nasm
-LEX?= lex
-YACC?= yacc
-WINDRES?=
-
-CFLAGS?= -O2 -g
-CPPFLAGS?=
-CXXFLAGS?=
-OBJCFLAGS?= ${CFLAGS}
-ASMFLAGS?= -g -w-orphan-labels
-LFLAGS?=
-LIBL?= -ll
-YFLAGS?= -d
-
-PROG_INSTALL?= Yes
-PROG_TYPE?= "CLI"
-PROG_GUID?=
-
-SHARE?=none
-SHARESRC?=none
-SRCS?=none
-OBJS?=none
-POBJS?=none
-SHOBJS?=none
-CONF?=none
-CONF_OVERWRITE?=No
-CLEANFILES?=
-
-CTAGS?=
-CTAGSFLAGS?=
-DPADD+=prog-tags
-
-all: all-subdir ${PROG}
-install: install-prog install-subdir
-deinstall: deinstall-prog deinstall-subdir
-clean: clean-prog clean-subdir
-cleandir: clean-prog clean-subdir cleandir-prog cleandir-subdir
-regress: regress-subdir
-depend: depend-subdir
-
-.SUFFIXES: .o .po .c .cc .cpp .asm .l .y .m
-
-# Compile C code into an object file
-.c.o:
- ${CC} ${CFLAGS} ${CPPFLAGS} -o $@ -c $<
-.c.po:
- ${CC} -pg -DPROF ${CFLAGS} ${CPPFLAGS} -o $@ -c $<
-
-# Compile C++ code into an object file
-.cc.o:
- ${CXX} ${CXXFLAGS} ${CPPFLAGS} -o $@ -c $<
-.cc.po:
- ${CXX} -pg -DPROF ${CXXFLAGS} ${CPPFLAGS} -o $@ -c $<
-.cpp.o:
- ${CXX} ${CXXFLAGS} ${CPPFLAGS} -o $@ -c $<
-.cpp.po:
- ${CXX} -pg -DPROF ${CXXFLAGS} ${CPPFLAGS} -o $@ -c $<
-
-# Compile C+Objective-C code into an object file
-.m.o:
- ${CC} ${OBJCFLAGS} ${CPPFLAGS} -o $@ -c $<
-.m.po:
- ${CC} -pg -DPROF ${OBJCFLAGS} ${CPPFLAGS} -o $@ -c $<
-
-# Compile assembly code into an object file
-.asm.o:
- ${ASM} ${ASMFLAGS} ${CPPFLAGS} -o $@ $<
-
-# Compile a Lex lexer into an object file
-.l:
- ${LEX} ${LFLAGS} -o$@.yy.c $<
- ${CC} ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} -o $@ $@.yy.c ${LIBL} ${LIBS}
- @rm -f $@.yy.c
-.l.o:
- ${LEX} ${LFLAGS} -o$@.yy.c $<
- ${CC} ${CFLAGS} ${CPPFLAGS} -o $@ -c $@.yy.c
- @mv -f $@.yy.o $@
- @rm -f $@.yy.c
-.l.po:
- ${LEX} ${LFLAGS} -o$@.yy.c $<
- ${CC} -pg -DPROF ${CFLAGS} ${CPPFLAGS} -o $@ -c $@.yy.c
- @mv -f $@.yy.o $@
- @rm -f $@.yy.c
-
-# Compile a Yacc parser into an object file
-.y:
- ${YACC} ${YFLAGS} -b $@ $<
- ${CC} ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} -o $@ $@.tab.c ${LIBS}
- @rm -f $@.tab.c
-.y.o:
- ${YACC} ${YFLAGS} -b $@ $<
- ${CC} ${CFLAGS} ${CPPFLAGS} -o $@ -c $@.tab.c
- @mv -f $@.tab.o $@
- @rm -f $@.tab.c
-.y.po:
- ${YACC} ${YFLAGS} -b $@ $<
- ${CC} -pg -DPROF ${CFLAGS} ${CPPFLAGS} -o $@ -c $@.tab.c
- @mv -f $@.tab.o $@
- @rm -f $@.tab.c
-
-# Build the program's object files
-_prog_objs:
- @if [ "${PROG}" != "" -a "${OBJS}" = "none" \
- -a "${SRCS}" != "none" ]; then \
- for F in ${SRCS}; do \
- F=`echo $$F | sed 's/.[clym]$$/.o/'`; \
- F=`echo $$F | sed 's/.cc$$/.o/'`; \
- F=`echo $$F | sed 's/.cpp$$/.o/'`; \
- F=`echo $$F | sed 's/.asm$$/.o/'`; \
- ${MAKE} $$F; \
- if [ $$? != 0 ]; then \
- echo "${MAKE}: failure"; \
- exit 1; \
- fi; \
- done; \
- fi
- @if [ "${WINRES}" != "" -a "${WINDRES}" != "" ]; then \
- echo "${WINDRES} -o ${WINRES}.o ${WINRES}"; \
- ${WINDRES} -o ${WINRES}.o ${WINRES}; \
- fi
-
-# Build profiled versions of the program's object files
-_prog_pobjs:
- @if [ "${GMONOUT}" != "" -a "${POBJS}" = "none" \
- -a "${SRCS}" != "none" ]; then \
- for F in ${SRCS}; do \
- F=`echo $$F | sed 's/.[clym]$$/.po/'`; \
- F=`echo $$F | sed 's/.cc$$/.po/'`; \
- F=`echo $$F | sed 's/.cpp$$/.po/'`; \
- F=`echo $$F | sed 's/.asm$$/.po/'`; \
- ${MAKE} $$F; \
- if [ $$? != 0 ]; then \
- echo "${MAKE}: failure"; \
- exit 1; \
- fi; \
- done; \
- fi
-
-# Compile and link the program
-${PROG}: _prog_objs ${OBJS}
- @if [ "${PROG}" != "" -a "${SRCS}" != "none" ]; then \
- if [ "${OBJS}" = "none" ]; then \
- export _objs=""; \
- for F in ${SRCS}; do \
- F=`echo $$F | sed 's/.[clym]$$/.o/'`; \
- F=`echo $$F | sed 's/.cc$$/.o/'`; \
- F=`echo $$F | sed 's/.cpp$$/.o/'`; \
- F=`echo $$F | sed 's/.asm$$/.o/'`; \
- _objs="$$_objs $$F"; \
- done; \
- if [ "${WINRES}" != "" ]; then \
- echo "${CC} ${CFLAGS} ${LDFLAGS} -o ${PROG} $$_objs ${LIBS} \
- ${WINRES}.o"; \
- ${CC} ${CFLAGS} ${LDFLAGS} -o ${PROG} $$_objs ${LIBS} \
- ${WINRES}.o; \
- else \
- echo "${CC} ${CFLAGS} ${LDFLAGS} -o ${PROG} $$_objs ${LIBS}"; \
- ${CC} ${CFLAGS} ${LDFLAGS} -o ${PROG} $$_objs ${LIBS}; \
- fi; \
- else \
- if [ "${WINRES}" != "" ]; then \
- echo "${CC} ${CFLAGS} ${LDFLAGS} -o ${PROG} ${OBJS} ${LIBS} \
- ${WINRES}.o"; \
- ${CC} ${CFLAGS} ${LDFLAGS} -o ${PROG} ${OBJS} ${LIBS} \
- ${WINRES}.o; \
- else \
- echo "${CC} ${CFLAGS} ${LDFLAGS} -o ${PROG} ${OBJS} ${LIBS}"; \
- ${CC} ${CFLAGS} ${LDFLAGS} -o ${PROG} ${OBJS} ${LIBS}; \
- fi; \
- fi; \
- fi
-
-# Compile and link a profiled version of the program
-${GMONOUT}: _prog_pobjs ${POBJS}
- @if [ "${GMONOUT}" != "" -a "${SRCS}" != "none" ]; then \
- if [ "${POBJS}" = "none" ]; then \
- export _pobjs=""; \
- for F in ${SRCS}; do \
- F=`echo $$F | sed 's/.[clym]$$/.po/'`; \
- F=`echo $$F | sed 's/.cc$$/.po/'`; \
- F=`echo $$F | sed 's/.cpp$$/.po/'`; \
- F=`echo $$F | sed 's/.asm$$/.po/'`; \
- _pobjs="$$_pobjs $$F"; \
- done; \
- echo "${CC} -pg -DPROF ${LDFLAGS} -o ${GMONOUT} $$_pobjs \
- ${LIBS}"; \
- ${CC} -pg -DPROF ${LDFLAGS} -o ${GMONOUT} $$_pobjs ${LIBS}; \
- else \
- echo "${CC} -pg -DPROF ${LDFLAGS} -o ${GMONOUT} ${POBJS} \
- ${LIBS}"; \
- ${CC} -pg -DPROF ${LDFLAGS} -o ${GMONOUT} ${POBJS} ${LIBS}; \
- fi; \
- fi
-
-clean-prog:
- @if [ "${PROG}" != "" -a "${SRCS}" != "none" ]; then \
- if [ "${SHOBJS}" = "none" ]; then \
- export _objs=""; \
- for F in ${SRCS}; do \
- F=`echo $$F | sed 's/.[clym]$$/.lo/'`; \
- F=`echo $$F | sed 's/.cc$$/.lo/'`; \
- F=`echo $$F | sed 's/.cpp$$/.lo/'`; \
- F=`echo $$F | sed 's/.asm$$/.lo/'`; \
- _objs="$$_objs $$F"; \
- done; \
- echo "rm -f $$_objs"; \
- rm -f $$_objs; \
- else \
- export _objs=""; \
- for F in ${SHOBJS}; do \
- F=`echo $$F | sed 's/.lo$$/.o/'`; \
- _objs="$$_objs $$F"; \
- done; \
- echo "rm -f $$_objs ${SHOBJS}"; \
- rm -f $$_objs ${SHOBJS}; \
- fi; \
- if [ "${OBJS}" = "none" ]; then \
- export _objs=""; \
- for F in ${SRCS}; do \
- F=`echo $$F | sed 's/.[clym]$$/.o/'`; \
- F=`echo $$F | sed 's/.cc$$/.o/'`; \
- F=`echo $$F | sed 's/.cpp$$/.o/'`; \
- F=`echo $$F | sed 's/.asm$$/.o/'`; \
- _objs="$$_objs $$F"; \
- done; \
- echo "rm -f $$_objs"; \
- rm -f $$_objs; \
- else \
- echo "rm -f ${OBJS}"; \
- rm -f ${OBJS}; \
- fi; \
- if [ "${POBJS}" = "none" ]; then \
- export _objs=""; \
- for F in ${SRCS}; do \
- F=`echo $$F | sed 's/.[clym]$$/.po/'`; \
- F=`echo $$F | sed 's/.cc$$/.po/'`; \
- F=`echo $$F | sed 's/.cpp$$/.po/'`; \
- F=`echo $$F | sed 's/.asm$$/.po/'`; \
- _objs="$$_objs $$F"; \
- done; \
- echo "rm -f $$_objs"; \
- rm -f $$_objs; \
- else \
- echo "rm -f ${POBJS}"; \
- rm -f ${OBJS}; \
- fi; \
- echo "rm -f ${PROG}${EXECSUFFIX} ${GMONOUT} ${WINRES}.o"; \
- rm -f ${PROG}${EXECSUFFIX} ${GMONOUT} ${WINRES}.o; \
- fi
- @if [ "${CLEANFILES}" != "" ]; then \
- echo "rm -f ${CLEANFILES}"; \
- rm -f ${CLEANFILES}; \
- fi
- @if [ -e ".depend" ]; then \
- echo "echo >.depend"; \
- echo >.depend; \
- fi
-
-cleandir-prog:
- rm -f *.core config.log configure.lua tags
- if [ -e "./config/prefix.h" ]; then rm -fr ./config; fi
- if [ -e "Makefile.config" ]; then echo >Makefile.config; fi
- if [ -e ".depend" ]; then echo >.depend; fi
-
-install-prog:
- @if [ ! -e "${BINDIR}" ]; then \
- echo "${INSTALL_PROG_DIR} ${BINDIR}"; \
- ${SUDO} ${INSTALL_PROG_DIR} ${DESTDIR}${BINDIR}; \
- fi
- @if [ "${PROG}" != "" -a "${PROG_INSTALL}" != "No" ]; then \
- echo "${INSTALL_PROG} ${PROG}${EXECSUFFIX} ${BINDIR}"; \
- ${SUDO} ${INSTALL_PROG} ${PROG}${EXECSUFFIX} ${DESTDIR}${BINDIR}; \
- fi
- @if [ "${SHARE}" != "none" ]; then \
- if [ ! -d "${SHAREDIR}" ]; then \
- echo "${INSTALL_DATA_DIR} ${SHAREDIR}"; \
- ${SUDO} ${INSTALL_DATA_DIR} ${DESTDIR}${SHAREDIR}; \
- fi; \
- for F in ${SHARE}; do \
- echo "${INSTALL_DATA} $$F ${SHAREDIR}"; \
- ${SUDO} ${INSTALL_DATA} $$F ${DESTDIR}${SHAREDIR}; \
- done; \
- fi
- @if [ "${SHARESRC}" != "none" ]; then \
- if [ ! -d "${SHAREDIR}" ]; then \
- echo "${INSTALL_DATA_DIR} ${SHAREDIR}"; \
- ${SUDO} ${INSTALL_DATA_DIR} ${DESTDIR}${SHAREDIR}; \
- fi; \
- if [ "${SRC}" != "" ]; then \
- for F in ${SHARESRC}; do \
- echo "${INSTALL_DATA} $$F ${SHAREDIR}"; \
- ${SUDO} ${INSTALL_DATA} ${SRC}/${BUILDREL}/$$F \
- ${DESTDIR}${SHAREDIR}; \
- done; \
- else \
- for F in ${SHARESRC}; do \
- echo "${INSTALL_DATA} $$F ${SHAREDIR}"; \
- ${SUDO} ${INSTALL_DATA} $$F ${DESTDIR}${SHAREDIR}; \
- done; \
- fi; \
- fi
- @if [ "${CONF}" != "none" ]; then \
- if [ ! -d "${SYSCONFDIR}" ]; then \
- echo "${INSTALL_DATA_DIR} ${SYSCONFDIR}"; \
- ${SUDO} ${INSTALL_DATA_DIR} ${DESTDIR}${SYSCONFDIR}; \
- fi; \
- if [ "${CONF_OVERWRITE}" != "Yes" ]; then \
- echo "+----------------"; \
- echo "| The following configuration files exist and "; \
- echo "| will not be overwritten:"; \
- echo "|"; \
- for F in ${CONF}; do \
- if [ -e "${DESTDIR}${SYSCONFDIR}/$$F" ]; then \
- echo "| - $$F"; \
- else \
- ${SUDO} ${INSTALL_DATA} $$F ${DESTDIR}${SYSCONFDIR}; \
- fi; \
- done; \
- echo "+----------------"; \
- else \
- for F in ${CONF}; do \
- echo "${INSTALL_DATA} $$F ${SYSCONFDIR}"; \
- ${SUDO} ${INSTALL_DATA} $$F ${DESTDIR}${SYSCONFDIR}; \
- done; \
- fi; \
- fi
-
-deinstall-prog:
- @if [ "${PROG}" != "" -a "${PROG_INSTALL}" != "No" ]; then \
- echo "${DEINSTALL_PROG} ${BINDIR}/${PROG}${EXECSUFFIX}"; \
- ${SUDO} ${DEINSTALL_PROG} ${DESTDIR}${BINDIR}/${PROG}${EXECSUFFIX}; \
- fi
- @if [ "${SHARE}" != "none" ]; then \
- for F in ${SHARE}; do \
- echo "${DEINSTALL_DATA} ${SHAREDIR}/$$F"; \
- ${SUDO} ${DEINSTALL_DATA} ${DESTDIR}${SHAREDIR}/$$F; \
- done; \
- fi
- @if [ "${CONF}" != "none" ]; then \
- echo "+----------------"; \
- echo "| To completely deinstall ${PROG} you need to perform."; \
- echo "| the following steps as root:"; \
- echo "|"; \
- for F in ${CONF}; do \
- if [ -e "${DESTDIR}${SYSCONFDIR}/$$F" ]; then \
- echo "| rm -f $$F"; \
- fi; \
- done; \
- echo "|"; \
- echo "| Do not do this if you plan on re-installing ${PROG}"; \
- echo "| at some future time."; \
- echo "+----------------"; \
- fi
-
-none:
-
-prog-tags:
- -@if [ "${CTAGS}" != "" ]; then \
- if [ "${SRC}" != "" ]; then \
- (cd ${SRC}; \
- echo "${CTAGS} ${CTAGSFLAGS} -R"; \
- ${CTAGS} ${CTAGSFLAGS} -R); \
- else \
- echo "${CTAGS} ${CTAGSFLAGS} -R"; \
- ${CTAGS} ${CTAGSFLAGS} -R; \
- fi; \
- fi
-
-.PHONY: install deinstall clean cleandir regress depend
-.PHONY: install-prog deinstall-prog clean-prog cleandir-prog
-.PHONY: _prog_objs _prog_pobjs prog-tags none
-
-include ${TOP}/mk/build.common.mk
-include ${TOP}/mk/build.dep.mk
-include ${TOP}/mk/build.proj.mk
-include ${TOP}/mk/build.subdir.mk
-include .depend
diff --git a/mk/build.proj.mk b/mk/build.proj.mk
deleted file mode 100644
index db081fd..0000000
--- a/mk/build.proj.mk
+++ /dev/null
@@ -1,164 +0,0 @@
-#
-# Copyright (c) 2007 Hypertriton, Inc.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-# USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#
-# For Makefiles using and , generate project
-# files for various IDEs using Premake (http://premake.sourceforge.net/).
-#
-
-PREMAKE?= premake
-ZIP?= zip
-ZIPFLAGS?= -r
-MKPROJFILES?= mkprojfiles
-PREMAKEOUT?= premake.lua
-PREMAKEFLAGS?=
-
-PROJECT?=
-PROJDIR?= ProjectFiles
-PROJFILESEXTRA?=
-PROJFILELIST= .projfiles2.out
-PROJCONFIGDIR?=
-PROJNOCLEAN?= no
-
-PROJFILES?= linux:cb-gcc:: \
- macosx:cb-gcc:: \
- windows:cb-gcc:: \
- windows:cb-ow:: \
- windows:vs2005:: \
- windows:vs2008::
-
-CLEANFILES+= ${PREMAKEOUT}
-
-proj-package:
- @if [ "${PROJECT}" = "" ]; then \
- echo "cat Makefile | ${MKPROJFILES} > ${PREMAKEOUT}"; \
- cat Makefile | \
- env PROJTARGET="${PROJTARGET}" PROJOS="${PROJOS}" \
- PROJFLAVOR="" PROJINCLUDES="${TOP}/configure.lua" \
- ${MKPROJFILES} > ${PREMAKEOUT}; \
- fi
-
-proj:
- @if [ ! -d "${PROJDIR}" ]; then \
- echo "mkdir -p ${PROJDIR}"; \
- mkdir -p ${PROJDIR}; \
- fi
- @for TGT in ${PROJFILES}; do \
- _tgtos=`echo $$TGT |awk -F: '{print $$1}' `; \
- _tgtproj=`echo $$TGT |awk -F: '{print $$2}' `; \
- _tgtflav=`echo $$TGT |awk -F: '{print $$3}' `; \
- _tgtopts=`echo $$TGT |awk -F: '{print $$4}'|sed 's/,/ /g'`; \
- echo "*"; \
- echo "* Target: $$_tgtos ($$_tgtproj)"; \
- echo "* Target flavor: $$_tgtflav"; \
- echo "* Target options: $$_tgtopts"; \
- echo "*"; \
- \
- if [ -e "config" ]; then \
- echo "rm -fR config"; \
- rm -fR config; \
- fi; \
- if [ -e "${PROJCONFIGDIR}" ]; then \
- echo "rm -fR ${PROJCONFIGDIR}"; \
- rm -fR "${PROJCONFIGDIR}"; \
- fi; \
- echo "mkconfigure --emul-env=$$_tgtproj --emul-os=$$_tgtos \
- --output-lua=${TOP}/configure.lua > configure.tmp"; \
- cat configure.in | \
- mkconfigure --emul-env=$$_tgtproj --emul-os=$$_tgtos \
- --output-lua=${TOP}/configure.lua > configure.tmp; \
- if [ $$? != 0 ]; then \
- echo "mkconfigure failed"; \
- rm -fR configure.tmp ${TOP}/configure.lua; \
- exit 1; \
- fi; \
- echo "./configure.tmp $$_tgtopts --with-proj-generation"; \
- ${SH} ./configure.tmp $$_tgtopts --with-proj-generation; \
- if [ $$? != 0 ]; then \
- echo "configure failed"; \
- echo > Makefile.config; \
- exit 1; \
- fi; \
- echo "${MAKE} proj-package-subdir"; \
- env PROJTARGET="$$_tgtproj" PROJOS="$$_tgtos" \
- ${MAKE} proj-package-subdir; \
- \
- if [ "${PROJCONFIGDIR}" != "" ]; then \
- echo "rm -fR ${PROJCONFIGDIR}"; \
- rm -fR ${PROJCONFIGDIR}; \
- echo "mv -f config ${PROJCONFIGDIR}"; \
- mv -f config ${PROJCONFIGDIR}; \
- fi; \
- if [ "${PROJNOCLEAN}" = "no" ]; then \
- echo "rm -f configure.tmp config.log"; \
- rm -f configure.tmp config.log; \
- fi; \
- \
- echo "cat Makefile | ${MKPROJFILES} > ${PREMAKEOUT}"; \
- cat Makefile | \
- env PROJFLAVOR="$$_tgtflav" \
- PROJOS="$$_tgtos" \
- PROJINCLUDES="${TOP}/configure.lua" \
- ${MKPROJFILES} > ${PREMAKEOUT}; \
- perl ${TOP}/mk/cmpfiles.pl; \
- echo "${PREMAKE} ${PREMAKEFLAGS} --file ${PREMAKEOUT} \
- --os $$_tgtos --target $$_tgtproj"; \
- ${PREMAKE} ${PREMAKEFLAGS} --file ${PREMAKEOUT} \
- --os $$_tgtos --target $$_tgtproj; \
- if [ $$? != 0 ]; then \
- echo "premake failed"; \
- exit 1; \
- fi; \
- perl ${TOP}/mk/cmpfiles.pl added > .projfiles.out; \
- echo "* Generated files: "; \
- cat .projfiles.out; \
- cp -f .projfiles.out ${PROJFILELIST}; \
- rm .cmpfiles.out; \
- if [ "${PROJFILESEXTRA}" != "" ]; then \
- for EXTRA in ${PROJFILESEXTRA}; do \
- echo "+ $$EXTRA: "; \
- echo "$$EXTRA" >> ${PROJFILELIST}; \
- done; \
- fi; \
- if [ -e "${PROJCONFIGDIR}" ]; then \
- echo "+ ${PROJCONFIGDIR}"; \
- echo "${PROJCONFIGDIR}" >> ${PROJFILELIST}; \
- fi; \
- echo "rm -f ${PROJDIR}/$$_tgtproj-$$_tgtos$$_tgtflav.zip"; \
- rm -f "${PROJDIR}/$$_tgtproj-$$_tgtos$$_tgtflav.zip"; \
- echo "* Creating $$_tgtproj-$$_tgtos$$_tgtflav.zip";\
- cat ${PROJFILELIST} | ${ZIP} ${ZIPFLAGS} \
- ${PROJDIR}/$$_tgtproj-$$_tgtos$$_tgtflav.zip -@;\
- if [ "${PROJNOCLEAN}" = "no" ]; then \
- echo "cat .projfiles.out | perl ${TOP}/mk/cleanfiles.pl"; \
- cat .projfiles.out | perl ${TOP}/mk/cleanfiles.pl; \
- echo "rm -fR ${PROJCONFIGDIR} ${PROJFILELIST}"; \
- rm -fR ${PROJCONFIGDIR} ${PROJFILELIST}; \
- echo "rm -f .projfiles.out ${TOP}/configure.lua"; \
- rm -f .projfiles.out ${TOP}/configure.lua; \
- fi; \
- done
- @echo "* Done"
-
-.PHONY: proj
diff --git a/mk/build.subdir.mk b/mk/build.subdir.mk
deleted file mode 100644
index 8da06d4..0000000
--- a/mk/build.subdir.mk
+++ /dev/null
@@ -1,307 +0,0 @@
-#
-# Copyright (c) 2001-2009 Hypertriton, Inc.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-# USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#
-# Logic required for recursing into subdirectories.
-#
-
-MAKE?=make
-
-all-subdir:
- @(if [ "${SUBDIR}" = "" ]; then \
- SUBDIR="NONE"; \
- else \
- SUBDIR="${SUBDIR}"; \
- fi; \
- if [ "$$SUBDIR" != "" -a "$$SUBDIR" != "NONE" ]; then \
- for F in $$SUBDIR; do \
- echo "==> ${REL}$$F"; \
- (cd $$F && ${MAKE} REL=${REL}$$F/); \
- if [ $$? != 0 ]; then \
- exit 1; \
- fi; \
- done; \
- fi)
-
-all-subdir-ifexists:
- @(if [ "${SUBDIR}" = "" ]; then \
- SUBDIR="NONE"; \
- else \
- SUBDIR="${SUBDIR}"; \
- fi; \
- if [ "$$SUBDIR" != "" -a "$$SUBDIR" != "NONE" ]; then \
- for F in $$SUBDIR; do \
- if [ -e "$$F" ]; then \
- echo "==> ${REL}$$F"; \
- (cd $$F && ${MAKE} REL=${REL}$$F/); \
- if [ $$? != 0 ]; then \
- exit 1; \
- fi; \
- fi; \
- done; \
- fi)
-
-clean-subdir:
- @(if [ "${SUBDIR}" = "" ]; then \
- SUBDIR="NONE"; \
- else \
- SUBDIR="${SUBDIR}"; \
- fi; \
- if [ "$$SUBDIR" != "" -a "$$SUBDIR" != "NONE" ]; then \
- for F in $$SUBDIR; do \
- echo "==> ${REL}$$F"; \
- (cd $$F && ${MAKE} REL=${REL}$$F/ clean); \
- if [ $$? != 0 ]; then \
- exit 1; \
- fi; \
- done; \
- fi)
-
-clean-subdir-ifexists:
- @(if [ "${SUBDIR}" = "" ]; then \
- SUBDIR="NONE"; \
- else \
- SUBDIR="${SUBDIR}"; \
- fi; \
- if [ "$$SUBDIR" != "" -a "$$SUBDIR" != "NONE" ]; then \
- for F in $$SUBDIR; do \
- if [ -e "$$F" ]; then \
- echo "==> ${REL}$$F"; \
- (cd $$F && ${MAKE} REL=${REL}$$F/ clean); \
- if [ $$? != 0 ]; then \
- exit 1; \
- fi; \
- fi; \
- done; \
- fi)
-
-install-subdir:
- @(if [ "${SUBDIR}" = "" ]; then \
- SUBDIR="NONE"; \
- else \
- SUBDIR="${SUBDIR}"; \
- fi; \
- if [ "$$SUBDIR" != "" -a "$$SUBDIR" != "NONE" ]; then \
- for F in $$SUBDIR; do \
- echo "==> ${REL}$$F"; \
- (cd $$F && ${MAKE} REL=${REL}$$F/ install); \
- if [ $$? != 0 ]; then \
- exit 1; \
- fi; \
- done; \
- fi)
-
-install-subdir-ifexists:
- @(if [ "${SUBDIR}" = "" ]; then \
- SUBDIR="NONE"; \
- else \
- SUBDIR="${SUBDIR}"; \
- fi; \
- if [ "$$SUBDIR" != "" -a "$$SUBDIR" != "NONE" ]; then \
- for F in $$SUBDIR; do \
- if [ -e "$$F" ]; then \
- echo "==> ${REL}$$F"; \
- (cd $$F && ${MAKE} REL=${REL}$$F/ install); \
- if [ $$? != 0 ]; then \
- exit 1; \
- fi; \
- fi; \
- done; \
- fi)
-
-deinstall-subdir:
- @(if [ "${SUBDIR}" = "" ]; then \
- SUBDIR="NONE"; \
- else \
- SUBDIR="${SUBDIR}"; \
- fi; \
- if [ "$$SUBDIR" != "" -a "$$SUBDIR" != "NONE" ]; then \
- for F in $$SUBDIR; do \
- echo "==> ${REL}$$F"; \
- (cd $$F && ${MAKE} REL=${REL}$$F/ deinstall); \
- if [ $$? != 0 ]; then \
- exit 1; \
- fi; \
- done; \
- fi)
-
-deinstall-subdir-ifexists:
- @(if [ "${SUBDIR}" = "" ]; then \
- SUBDIR="NONE"; \
- else \
- SUBDIR="${SUBDIR}"; \
- fi; \
- if [ "$$SUBDIR" != "" -a "$$SUBDIR" != "NONE" ]; then \
- for F in $$SUBDIR; do \
- if [ -e "$$F" ]; then \
- echo "==> ${REL}$$F"; \
- (cd $$F && ${MAKE} REL=${REL}$$F/ deinstall); \
- if [ $$? != 0 ]; then \
- exit 1; \
- fi; \
- fi; \
- done; \
- fi)
-
-depend-subdir:
- @(if [ "${SUBDIR}" = "" ]; then \
- SUBDIR="NONE"; \
- else \
- SUBDIR="${SUBDIR}"; \
- fi; \
- if [ "$$SUBDIR" != "" -a "$$SUBDIR" != "NONE" ]; then \
- for F in $$SUBDIR; do \
- echo "==> ${REL}$$F"; \
- (cd $$F && ${MAKE} REL=${REL}$$F/ depend); \
- if [ $$? != 0 ]; then \
- exit 1; \
- fi; \
- done; \
- fi)
-
-depend-subdir-ifexists:
- @(if [ "${SUBDIR}" = "" ]; then \
- SUBDIR="NONE"; \
- else \
- SUBDIR="${SUBDIR}"; \
- fi; \
- if [ "$$SUBDIR" != "" -a "$$SUBDIR" != "NONE" ]; then \
- for F in $$SUBDIR; do \
- if [ -e "$$F" ]; then \
- echo "==> ${REL}$$F"; \
- (cd $$F && ${MAKE} REL=${REL}$$F/ depend); \
- if [ $$? != 0 ]; then \
- exit 1; \
- fi; \
- fi; \
- done; \
- fi)
-
-
-cleandir-subdir:
- @(if [ "${SUBDIR}" = "" ]; then \
- SUBDIR="NONE"; \
- else \
- SUBDIR="${SUBDIR}"; \
- fi; \
- if [ "$$SUBDIR" != "" -a "$$SUBDIR" != "NONE" ]; then \
- for F in $$SUBDIR; do \
- echo "==> ${REL}$$F"; \
- (cd $$F && ${MAKE} REL=${REL}$$F/ cleandir); \
- if [ $$? != 0 ]; then \
- exit 1; \
- fi; \
- done; \
- fi)
-
-cleandir-subdir-ifexists:
- @(if [ "${SUBDIR}" = "" ]; then \
- SUBDIR="NONE"; \
- else \
- SUBDIR="${SUBDIR}"; \
- fi; \
- if [ "$$SUBDIR" != "" -a "$$SUBDIR" != "NONE" ]; then \
- for F in $$SUBDIR; do \
- if [ -e "$$F" ]; then \
- echo "==> ${REL}$$F"; \
- (cd $$F && ${MAKE} REL=${REL}$$F/ cleandir); \
- if [ $$? != 0 ]; then \
- exit 1; \
- fi; \
- fi; \
- done; \
- fi)
-
-regress-subdir:
- @(if [ "${SUBDIR}" = "" ]; then \
- SUBDIR="NONE"; \
- else \
- SUBDIR="${SUBDIR}"; \
- fi; \
- if [ "$$SUBDIR" != "" -a "$$SUBDIR" != "NONE" ]; then \
- for F in $$SUBDIR; do \
- echo "==> ${REL}$$F"; \
- (cd $$F && ${MAKE} REL=${REL}$$F/ regress); \
- if [ $$? != 0 ]; then \
- exit 1; \
- fi; \
- done; \
- fi)
-
-regress-subdir-ifexists:
- @(if [ "${SUBDIR}" = "" ]; then \
- SUBDIR="NONE"; \
- else \
- SUBDIR="${SUBDIR}"; \
- fi; \
- if [ "$$SUBDIR" != "" -a "$$SUBDIR" != "NONE" ]; then \
- for F in $$SUBDIR; do \
- if [ -e "$$F" ]; then \
- echo "==> ${REL}$$F"; \
- (cd $$F && ${MAKE} REL=${REL}$$F/ regress); \
- if [ $$? != 0 ]; then \
- exit 1; \
- fi; \
- fi; \
- done; \
- fi)
-
-proj-package-subdir:
- @(if [ "${SUBDIR}" = "" ]; then \
- SUBDIR="NONE"; \
- else \
- SUBDIR="${SUBDIR}"; \
- fi; \
- if [ "$$SUBDIR" != "" -a "$$SUBDIR" != "NONE" ]; then \
- for F in $$SUBDIR; do \
- echo "==> ${REL}$$F"; \
- (cd $$F && ${MAKE} REL=${REL}$$F/ proj-package); \
- if [ $$? != 0 ]; then \
- exit 1; \
- fi; \
- done; \
- fi)
-
-proj-clean-subdir:
- @(if [ "${SUBDIR}" = "" ]; then \
- SUBDIR="NONE"; \
- else \
- SUBDIR="${SUBDIR}"; \
- fi; \
- if [ "$$SUBDIR" != "" -a "$$SUBDIR" != "NONE" ]; then \
- for F in $$SUBDIR; do \
- echo "==> ${REL}$$F"; \
- (cd $$F && ${MAKE} REL=${REL}$$F/ proj-clean); \
- if [ $$? != 0 ]; then \
- exit 1; \
- fi; \
- done; \
- fi)
-
-.PHONY: all-subdir clean-subdir cleandir-subdir install-subdir
-.PHONY: deinstall-subdir depend-subdir regress-subdir
-.PHONY: all-subdir-ifexists clean-subdir-ifexists cleandir-subdir-ifexists
-.PHONY: install-subdir-ifexists deinstall-subdir-ifexists
-.PHONY: depend-subdir-ifexists regress-subdir-ifexists
-.PHONY: proj-package-subdir proj-clean-subdir
diff --git a/mk/config.guess b/mk/config.guess
deleted file mode 100644
index 12734a7..0000000
--- a/mk/config.guess
+++ /dev/null
@@ -1,1554 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
-# Free Software Foundation, Inc.
-
-timestamp='2009-08-19'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner. Please send patches (context
-# diff format) to and include a ChangeLog
-# entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub. If it succeeds, it prints the system name on stdout, and
-# exits with 0. Otherwise, it exits with 1.
-#
-# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to ."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit ;;
- --version | -v )
- echo "$version" ; exit ;;
- --help | --h* | -h )
- echo "$usage"; exit ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help" >&2
- exit 1 ;;
- * )
- break ;;
- esac
-done
-
-if test $# != 0; then
- echo "$me: too many arguments$help" >&2
- exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,) echo "int x;" > $dummy.c ;
- for c in cc gcc c89 c99 ; do
- if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
- CC_FOR_BUILD="$c"; break ;
- fi ;
- done ;
- if test x"$CC_FOR_BUILD" = x ; then
- CC_FOR_BUILD=no_compiler_found ;
- fi
- ;;
- ,,*) CC_FOR_BUILD=$CC ;;
- ,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac ; set_cc_for_build= ;'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
- PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-case "${UNAME_SYSTEM}" in
-Linux|GNU/*)
- eval $set_cc_for_build
- cat << EOF > $dummy.c
- #include
- #ifdef __UCLIBC__
- # ifdef __UCLIBC_CONFIG_VERSION__
- LIBC=uclibc __UCLIBC_CONFIG_VERSION__
- # else
- LIBC=uclibc
- # endif
- #else
- LIBC=gnu
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep LIBC= | sed -e 's: ::g'`
- ;;
-esac
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
- *:NetBSD:*:*)
- # NetBSD (nbsd) targets should (where applicable) match one or
- # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
- # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
- # switched to ELF, *-*-netbsd* would select the old
- # object file format. This provides both forward
- # compatibility and a consistent mechanism for selecting the
- # object file format.
- #
- # Note: NetBSD doesn't particularly care about the vendor
- # portion of the name. We always set it to "unknown".
- sysctl="sysctl -n hw.machine_arch"
- UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
- /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
- case "${UNAME_MACHINE_ARCH}" in
- armeb) machine=armeb-unknown ;;
- arm*) machine=arm-unknown ;;
- sh3el) machine=shl-unknown ;;
- sh3eb) machine=sh-unknown ;;
- sh5el) machine=sh5le-unknown ;;
- *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
- esac
- # The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
- case "${UNAME_MACHINE_ARCH}" in
- arm*|i386|m68k|ns32k|sh3*|sparc|vax)
- eval $set_cc_for_build
- if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep -q __ELF__
- then
- # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
- # Return netbsd for either. FIX?
- os=netbsd
- else
- os=netbsdelf
- fi
- ;;
- *)
- os=netbsd
- ;;
- esac
- # The OS release
- # Debian GNU/NetBSD machines have a different userland, and
- # thus, need a distinct triplet. However, they do not need
- # kernel version information, so it can be replaced with a
- # suitable tag, in the style of linux-gnu.
- case "${UNAME_VERSION}" in
- Debian*)
- release='-gnu'
- ;;
- *)
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- ;;
- esac
- # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
- # contains redundant information, the shorter form:
- # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
- exit ;;
- *:OpenBSD:*:*)
- UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
- echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
- exit ;;
- *:ekkoBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
- exit ;;
- *:SolidBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
- exit ;;
- macppc:MirBSD:*:*)
- echo powerpc-unknown-mirbsd${UNAME_RELEASE}
- exit ;;
- *:MirBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
- exit ;;
- alpha:OSF1:*:*)
- case $UNAME_RELEASE in
- *4.0)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- ;;
- *5.*)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
- ;;
- esac
- # According to Compaq, /usr/sbin/psrinfo has been available on
- # OSF/1 and Tru64 systems produced since 1995. I hope that
- # covers most systems running today. This code pipes the CPU
- # types through head -n 1, so we only detect the type of CPU 0.
- ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
- case "$ALPHA_CPU_TYPE" in
- "EV4 (21064)")
- UNAME_MACHINE="alpha" ;;
- "EV4.5 (21064)")
- UNAME_MACHINE="alpha" ;;
- "LCA4 (21066/21068)")
- UNAME_MACHINE="alpha" ;;
- "EV5 (21164)")
- UNAME_MACHINE="alphaev5" ;;
- "EV5.6 (21164A)")
- UNAME_MACHINE="alphaev56" ;;
- "EV5.6 (21164PC)")
- UNAME_MACHINE="alphapca56" ;;
- "EV5.7 (21164PC)")
- UNAME_MACHINE="alphapca57" ;;
- "EV6 (21264)")
- UNAME_MACHINE="alphaev6" ;;
- "EV6.7 (21264A)")
- UNAME_MACHINE="alphaev67" ;;
- "EV6.8CB (21264C)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8AL (21264B)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8CX (21264D)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.9A (21264/EV69A)")
- UNAME_MACHINE="alphaev69" ;;
- "EV7 (21364)")
- UNAME_MACHINE="alphaev7" ;;
- "EV7.9 (21364A)")
- UNAME_MACHINE="alphaev79" ;;
- esac
- # A Pn.n version is a patched version.
- # A Vn.n version is a released version.
- # A Tn.n version is a released field test version.
- # A Xn.n version is an unreleased experimental baselevel.
- # 1.2 uses "1.2" for uname -r.
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- exit ;;
- Alpha\ *:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # Should we change UNAME_MACHINE based on the output of uname instead
- # of the specific Alpha model?
- echo alpha-pc-interix
- exit ;;
- 21064:Windows_NT:50:3)
- echo alpha-dec-winnt3.5
- exit ;;
- Amiga*:UNIX_System_V:4.0:*)
- echo m68k-unknown-sysv4
- exit ;;
- *:[Aa]miga[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-amigaos
- exit ;;
- *:[Mm]orph[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-morphos
- exit ;;
- *:OS/390:*:*)
- echo i370-ibm-openedition
- exit ;;
- *:z/VM:*:*)
- echo s390-ibm-zvmoe
- exit ;;
- *:OS400:*:*)
- echo powerpc-ibm-os400
- exit ;;
- arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
- echo arm-acorn-riscix${UNAME_RELEASE}
- exit ;;
- arm:riscos:*:*|arm:RISCOS:*:*)
- echo arm-unknown-riscos
- exit ;;
- SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
- echo hppa1.1-hitachi-hiuxmpp
- exit ;;
- Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
- # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
- if test "`(/bin/universe) 2>/dev/null`" = att ; then
- echo pyramid-pyramid-sysv3
- else
- echo pyramid-pyramid-bsd
- fi
- exit ;;
- NILE*:*:*:dcosx)
- echo pyramid-pyramid-svr4
- exit ;;
- DRS?6000:unix:4.0:6*)
- echo sparc-icl-nx6
- exit ;;
- DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
- case `/usr/bin/uname -p` in
- sparc) echo sparc-icl-nx7; exit ;;
- esac ;;
- s390x:SunOS:*:*)
- echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4H:SunOS:5.*:*)
- echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
- eval $set_cc_for_build
- SUN_ARCH="i386"
- # If there is a compiler, see if it is configured for 64-bit objects.
- # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
- # This test works for both compilers.
- if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
- if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
- (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
- grep IS_64BIT_ARCH >/dev/null
- then
- SUN_ARCH="x86_64"
- fi
- fi
- echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:6*:*)
- # According to config.sub, this is the proper way to canonicalize
- # SunOS6. Hard to guess exactly what SunOS6 will be like, but
- # it's likely to be more like Solaris than SunOS4.
- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:*:*)
- case "`/usr/bin/arch -k`" in
- Series*|S4*)
- UNAME_RELEASE=`uname -v`
- ;;
- esac
- # Japanese Language versions have a version number like `4.1.3-JL'.
- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit ;;
- sun3*:SunOS:*:*)
- echo m68k-sun-sunos${UNAME_RELEASE}
- exit ;;
- sun*:*:4.2BSD:*)
- UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
- case "`/bin/arch`" in
- sun3)
- echo m68k-sun-sunos${UNAME_RELEASE}
- ;;
- sun4)
- echo sparc-sun-sunos${UNAME_RELEASE}
- ;;
- esac
- exit ;;
- aushp:SunOS:*:*)
- echo sparc-auspex-sunos${UNAME_RELEASE}
- exit ;;
- # The situation for MiNT is a little confusing. The machine name
- # can be virtually everything (everything which is not
- # "atarist" or "atariste" at least should have a processor
- # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
- # to the lowercase version "mint" (or "freemint"). Finally
- # the system name "TOS" denotes a system which is actually not
- # MiNT. But MiNT is downward compatible to TOS, so this should
- # be no problem.
- atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
- exit ;;
- hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
- exit ;;
- *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
- exit ;;
- m68k:machten:*:*)
- echo m68k-apple-machten${UNAME_RELEASE}
- exit ;;
- powerpc:machten:*:*)
- echo powerpc-apple-machten${UNAME_RELEASE}
- exit ;;
- RISC*:Mach:*:*)
- echo mips-dec-mach_bsd4.3
- exit ;;
- RISC*:ULTRIX:*:*)
- echo mips-dec-ultrix${UNAME_RELEASE}
- exit ;;
- VAX*:ULTRIX*:*:*)
- echo vax-dec-ultrix${UNAME_RELEASE}
- exit ;;
- 2020:CLIX:*:* | 2430:CLIX:*:*)
- echo clipper-intergraph-clix${UNAME_RELEASE}
- exit ;;
- mips:*:*:UMIPS | mips:*:*:RISCos)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-#ifdef __cplusplus
-#include /* for printf() prototype */
- int main (int argc, char *argv[]) {
-#else
- int main (argc, argv) int argc; char *argv[]; {
-#endif
- #if defined (host_mips) && defined (MIPSEB)
- #if defined (SYSTYPE_SYSV)
- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_SVR4)
- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
- #endif
- #endif
- exit (-1);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c &&
- dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
- SYSTEM_NAME=`$dummy $dummyarg` &&
- { echo "$SYSTEM_NAME"; exit; }
- echo mips-mips-riscos${UNAME_RELEASE}
- exit ;;
- Motorola:PowerMAX_OS:*:*)
- echo powerpc-motorola-powermax
- exit ;;
- Motorola:*:4.3:PL8-*)
- echo powerpc-harris-powermax
- exit ;;
- Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
- echo powerpc-harris-powermax
- exit ;;
- Night_Hawk:Power_UNIX:*:*)
- echo powerpc-harris-powerunix
- exit ;;
- m88k:CX/UX:7*:*)
- echo m88k-harris-cxux7
- exit ;;
- m88k:*:4*:R4*)
- echo m88k-motorola-sysv4
- exit ;;
- m88k:*:3*:R3*)
- echo m88k-motorola-sysv3
- exit ;;
- AViiON:dgux:*:*)
- # DG/UX returns AViiON for all architectures
- UNAME_PROCESSOR=`/usr/bin/uname -p`
- if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
- then
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
- [ ${TARGET_BINARY_INTERFACE}x = x ]
- then
- echo m88k-dg-dgux${UNAME_RELEASE}
- else
- echo m88k-dg-dguxbcs${UNAME_RELEASE}
- fi
- else
- echo i586-dg-dgux${UNAME_RELEASE}
- fi
- exit ;;
- M88*:DolphinOS:*:*) # DolphinOS (SVR3)
- echo m88k-dolphin-sysv3
- exit ;;
- M88*:*:R3*:*)
- # Delta 88k system running SVR3
- echo m88k-motorola-sysv3
- exit ;;
- XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
- echo m88k-tektronix-sysv3
- exit ;;
- Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
- echo m68k-tektronix-bsd
- exit ;;
- *:IRIX*:*:*)
- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit ;;
- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
- i*86:AIX:*:*)
- echo i386-ibm-aix
- exit ;;
- ia64:AIX:*:*)
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
- exit ;;
- *:AIX:2:3)
- if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include
-
- main()
- {
- if (!__power_pc())
- exit(1);
- puts("powerpc-ibm-aix3.2.5");
- exit(0);
- }
-EOF
- if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
- then
- echo "$SYSTEM_NAME"
- else
- echo rs6000-ibm-aix3.2.5
- fi
- elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
- echo rs6000-ibm-aix3.2.4
- else
- echo rs6000-ibm-aix3.2
- fi
- exit ;;
- *:AIX:*:[456])
- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
- IBM_ARCH=rs6000
- else
- IBM_ARCH=powerpc
- fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit ;;
- *:AIX:*:*)
- echo rs6000-ibm-aix
- exit ;;
- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
- echo romp-ibm-bsd4.4
- exit ;;
- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit ;; # report: romp-ibm BSD 4.3
- *:BOSX:*:*)
- echo rs6000-bull-bosx
- exit ;;
- DPX/2?00:B.O.S.:*:*)
- echo m68k-bull-sysv3
- exit ;;
- 9000/[34]??:4.3bsd:1.*:*)
- echo m68k-hp-bsd
- exit ;;
- hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
- echo m68k-hp-bsd4.4
- exit ;;
- 9000/[34678]??:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- case "${UNAME_MACHINE}" in
- 9000/31? ) HP_ARCH=m68000 ;;
- 9000/[34]?? ) HP_ARCH=m68k ;;
- 9000/[678][0-9][0-9])
- if [ -x /usr/bin/getconf ]; then
- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
- 532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
- '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
- esac ;;
- esac
- fi
- if [ "${HP_ARCH}" = "" ]; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-
- #define _HPUX_SOURCE
- #include
- #include
-
- int main ()
- {
- #if defined(_SC_KERNEL_BITS)
- long bits = sysconf(_SC_KERNEL_BITS);
- #endif
- long cpu = sysconf (_SC_CPU_VERSION);
-
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
- case CPU_PA_RISC2_0:
- #if defined(_SC_KERNEL_BITS)
- switch (bits)
- {
- case 64: puts ("hppa2.0w"); break;
- case 32: puts ("hppa2.0n"); break;
- default: puts ("hppa2.0"); break;
- } break;
- #else /* !defined(_SC_KERNEL_BITS) */
- puts ("hppa2.0"); break;
- #endif
- default: puts ("hppa1.0"); break;
- }
- exit (0);
- }
-EOF
- (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
- test -z "$HP_ARCH" && HP_ARCH=hppa
- fi ;;
- esac
- if [ ${HP_ARCH} = "hppa2.0w" ]
- then
- eval $set_cc_for_build
-
- # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
- # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
- # generating 64-bit code. GNU and HP use different nomenclature:
- #
- # $ CC_FOR_BUILD=cc ./config.guess
- # => hppa2.0w-hp-hpux11.23
- # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
- # => hppa64-hp-hpux11.23
-
- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
- grep -q __LP64__
- then
- HP_ARCH="hppa2.0w"
- else
- HP_ARCH="hppa64"
- fi
- fi
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit ;;
- ia64:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- echo ia64-hp-hpux${HPUX_REV}
- exit ;;
- 3050*:HI-UX:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include
- int
- main ()
- {
- long cpu = sysconf (_SC_CPU_VERSION);
- /* The order matters, because CPU_IS_HP_MC68K erroneously returns
- true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
- results, however. */
- if (CPU_IS_PA_RISC (cpu))
- {
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
- default: puts ("hppa-hitachi-hiuxwe2"); break;
- }
- }
- else if (CPU_IS_HP_MC68K (cpu))
- puts ("m68k-hitachi-hiuxwe2");
- else puts ("unknown-hitachi-hiuxwe2");
- exit (0);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
- echo unknown-hitachi-hiuxwe2
- exit ;;
- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
- echo hppa1.1-hp-bsd
- exit ;;
- 9000/8??:4.3bsd:*:*)
- echo hppa1.0-hp-bsd
- exit ;;
- *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
- echo hppa1.0-hp-mpeix
- exit ;;
- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
- echo hppa1.1-hp-osf
- exit ;;
- hp8??:OSF1:*:*)
- echo hppa1.0-hp-osf
- exit ;;
- i*86:OSF1:*:*)
- if [ -x /usr/sbin/sysversion ] ; then
- echo ${UNAME_MACHINE}-unknown-osf1mk
- else
- echo ${UNAME_MACHINE}-unknown-osf1
- fi
- exit ;;
- parisc*:Lites*:*:*)
- echo hppa1.1-hp-lites
- exit ;;
- C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
- echo c1-convex-bsd
- exit ;;
- C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
- echo c34-convex-bsd
- exit ;;
- C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
- echo c38-convex-bsd
- exit ;;
- C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
- echo c4-convex-bsd
- exit ;;
- CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*[A-Z]90:*:*:*)
- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
- | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
- -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*T3E:*:*:*)
- echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*SV1:*:*:*)
- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- *:UNICOS/mp:*:*)
- echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit ;;
- 5000:UNIX_System_V:4.*:*)
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit ;;
- i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit ;;
- sparc*:BSD/OS:*:*)
- echo sparc-unknown-bsdi${UNAME_RELEASE}
- exit ;;
- *:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
- exit ;;
- *:FreeBSD:*:*)
- case ${UNAME_MACHINE} in
- pc98)
- echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
- amd64)
- echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
- *)
- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
- esac
- exit ;;
- i*:CYGWIN*:*)
- echo ${UNAME_MACHINE}-pc-cygwin
- exit ;;
- *:MINGW*:*)
- echo ${UNAME_MACHINE}-pc-mingw32
- exit ;;
- i*:windows32*:*)
- # uname -m includes "-pc" on this system.
- echo ${UNAME_MACHINE}-mingw32
- exit ;;
- i*:PW*:*)
- echo ${UNAME_MACHINE}-pc-pw32
- exit ;;
- *:Interix*:[3456]*)
- case ${UNAME_MACHINE} in
- x86)
- echo i586-pc-interix${UNAME_RELEASE}
- exit ;;
- EM64T | authenticamd | genuineintel)
- echo x86_64-unknown-interix${UNAME_RELEASE}
- exit ;;
- IA64)
- echo ia64-unknown-interix${UNAME_RELEASE}
- exit ;;
- esac ;;
- [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
- echo i${UNAME_MACHINE}-pc-mks
- exit ;;
- 8664:Windows_NT:*)
- echo x86_64-pc-mks
- exit ;;
- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
- # UNAME_MACHINE based on the output of uname instead of i386?
- echo i586-pc-interix
- exit ;;
- i*:UWIN*:*)
- echo ${UNAME_MACHINE}-pc-uwin
- exit ;;
- amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
- echo x86_64-unknown-cygwin
- exit ;;
- p*:CYGWIN*:*)
- echo powerpcle-unknown-cygwin
- exit ;;
- prep*:SunOS:5.*:*)
- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- *:GNU:*:*)
- # the GNU system
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit ;;
- *:GNU/*:*:*)
- # other systems with GNU libc and userland
- echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
- exit ;;
- i*86:Minix:*:*)
- echo ${UNAME_MACHINE}-pc-minix
- exit ;;
- arm*:Linux:*:*)
- eval $set_cc_for_build
- if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep -q __ARM_EABI__
- then
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
- else
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
- fi
- exit ;;
- avr32*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
- exit ;;
- cris:Linux:*:*)
- echo cris-axis-linux-${LIBC}
- exit ;;
- crisv32:Linux:*:*)
- echo crisv32-axis-linux-${LIBC}
- exit ;;
- frv:Linux:*:*)
- echo frv-unknown-linux-${LIBC}
- exit ;;
- ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
- exit ;;
- m32r*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
- exit ;;
- m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
- exit ;;
- mips:Linux:*:* | mips64:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef ${UNAME_MACHINE}
- #undef ${UNAME_MACHINE}el
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=${UNAME_MACHINE}el
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=${UNAME_MACHINE}
- #else
- CPU=
- #endif
- #endif
-EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^CPU/{
- s: ::g
- p
- }'`"
- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
- ;;
- or32:Linux:*:*)
- echo or32-unknown-linux-${LIBC}
- exit ;;
- ppc:Linux:*:*)
- echo powerpc-unknown-linux-${LIBC}
- exit ;;
- ppc64:Linux:*:*)
- echo powerpc64-unknown-linux-${LIBC}
- exit ;;
- alpha:Linux:*:*)
- case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
- EV5) UNAME_MACHINE=alphaev5 ;;
- EV56) UNAME_MACHINE=alphaev56 ;;
- PCA56) UNAME_MACHINE=alphapca56 ;;
- PCA57) UNAME_MACHINE=alphapca56 ;;
- EV6) UNAME_MACHINE=alphaev6 ;;
- EV67) UNAME_MACHINE=alphaev67 ;;
- EV68*) UNAME_MACHINE=alphaev68 ;;
- esac
- objdump --private-headers /bin/sh | grep -q ld.so.1
- if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
- exit ;;
- padre:Linux:*:*)
- echo sparc-unknown-linux-${LIBC}
- exit ;;
- parisc:Linux:*:* | hppa:Linux:*:*)
- # Look for CPU level
- case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
- PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
- PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
- *) echo hppa-unknown-linux-${LIBC} ;;
- esac
- exit ;;
- parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-unknown-linux-${LIBC}
- exit ;;
- s390:Linux:*:* | s390x:Linux:*:*)
- echo ${UNAME_MACHINE}-ibm-linux
- exit ;;
- sh64*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
- exit ;;
- sh*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
- exit ;;
- sparc:Linux:*:* | sparc64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
- exit ;;
- vax:Linux:*:*)
- echo ${UNAME_MACHINE}-dec-linux-${LIBC}
- exit ;;
- x86_64:Linux:*:*)
- echo x86_64-unknown-linux-${LIBC}
- exit ;;
- xtensa*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
- exit ;;
- i*86:Linux:*:*)
- # The BFD linker knows what the default object file format is, so
- # first see if it will tell us. cd to the root directory to prevent
- # problems with other programs or directories called `ld' in the path.
- # Set LC_ALL=C to ensure ld outputs messages in English.
- ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
- | sed -ne '/supported targets:/!d
- s/[ ][ ]*/ /g
- s/.*supported targets: *//
- s/ .*//
- p'`
- case "$ld_supported_targets" in
- elf32-i386)
- TENTATIVE="${UNAME_MACHINE}-pc-linux-${LIBC}"
- ;;
- esac
- # This should get integrated into the C code below, but now we hack
- if [ "$LIBC" != "gnu" ] ; then echo "$TENTATIVE" && exit 0 ; fi
- # Determine whether the default compiler is a.out or elf
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include
- #ifdef __ELF__
- # ifdef __GLIBC__
- # if __GLIBC__ >= 2
- LIBC=gnu
- # else
- LIBC=gnulibc1
- # endif
- # else
- LIBC=gnulibc1
- # endif
- #else
- #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
- LIBC=gnu
- #else
- LIBC=gnuaout
- #endif
- #endif
- #ifdef __dietlibc__
- LIBC=dietlibc
- #endif
-EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^LIBC/{
- s: ::g
- p
- }'`"
- test x"${LIBC}" != x && {
- echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
- exit
- }
- test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
- ;;
- i*86:DYNIX/ptx:4*:*)
- # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
- # earlier versions are messed up and put the nodename in both
- # sysname and nodename.
- echo i386-sequent-sysv4
- exit ;;
- i*86:UNIX_SV:4.2MP:2.*)
- # Unixware is an offshoot of SVR4, but it has its own version
- # number series starting with 2...
- # I am not positive that other SVR4 systems won't match this,
- # I just have to hope. -- rms.
- # Use sysv4.2uw... so that sysv4* matches it.
- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit ;;
- i*86:OS/2:*:*)
- # If we were able to find `uname', then EMX Unix compatibility
- # is probably installed.
- echo ${UNAME_MACHINE}-pc-os2-emx
- exit ;;
- i*86:XTS-300:*:STOP)
- echo ${UNAME_MACHINE}-unknown-stop
- exit ;;
- i*86:atheos:*:*)
- echo ${UNAME_MACHINE}-unknown-atheos
- exit ;;
- i*86:syllable:*:*)
- echo ${UNAME_MACHINE}-pc-syllable
- exit ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- i*86:*DOS:*:*)
- echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit ;;
- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
- UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
- echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
- else
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
- fi
- exit ;;
- i*86:*:5:[678]*)
- # UnixWare 7.x, OpenUNIX and OpenServer 6.
- case `/bin/uname -X | grep "^Machine"` in
- *486*) UNAME_MACHINE=i486 ;;
- *Pentium) UNAME_MACHINE=i586 ;;
- *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
- esac
- echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
- exit ;;
- i*86:*:3.2:*)
- if test -f /usr/options/cb.name; then
- UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then
- UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
- (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
- (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
- && UNAME_MACHINE=i586
- (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
- && UNAME_MACHINE=i686
- (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
- && UNAME_MACHINE=i686
- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
- else
- echo ${UNAME_MACHINE}-pc-sysv32
- fi
- exit ;;
- pc:*:*:*)
- # Left here for compatibility:
- # uname -m prints for DJGPP always 'pc', but it prints nothing about
- # the processor, so we play safe by assuming i586.
- # Note: whatever this is, it MUST be the same as what config.sub
- # prints for the "djgpp" host, or else GDB configury will decide that
- # this is a cross-build.
- echo i586-pc-msdosdjgpp
- exit ;;
- Intel:Mach:3*:*)
- echo i386-pc-mach3
- exit ;;
- paragon:*:*:*)
- echo i860-intel-osf1
- exit ;;
- i860:*:4.*:*) # i860-SVR4
- if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
- else # Add other i860-SVR4 vendors below as they are discovered.
- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
- fi
- exit ;;
- mini*:CTIX:SYS*5:*)
- # "miniframe"
- echo m68010-convergent-sysv
- exit ;;
- mc68k:UNIX:SYSTEM5:3.51m)
- echo m68k-convergent-sysv
- exit ;;
- M680?0:D-NIX:5.3:*)
- echo m68k-diab-dnix
- exit ;;
- M68*:*:R3V[5678]*:*)
- test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
- 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
- OS_REL=''
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
- 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4; exit; } ;;
- NCR*:*:4.2:* | MPRAS*:*:4.2:*)
- OS_REL='.3'
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
- /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
- m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
- echo m68k-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- mc68030:UNIX_System_V:4.*:*)
- echo m68k-atari-sysv4
- exit ;;
- TSUNAMI:LynxOS:2.*:*)
- echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- rs6000:LynxOS:2.*:*)
- echo rs6000-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
- echo powerpc-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- SM[BE]S:UNIX_SV:*:*)
- echo mips-dde-sysv${UNAME_RELEASE}
- exit ;;
- RM*:ReliantUNIX-*:*:*)
- echo mips-sni-sysv4
- exit ;;
- RM*:SINIX-*:*:*)
- echo mips-sni-sysv4
- exit ;;
- *:SINIX-*:*:*)
- if uname -p 2>/dev/null >/dev/null ; then
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- echo ${UNAME_MACHINE}-sni-sysv4
- else
- echo ns32k-sni-sysv
- fi
- exit ;;
- PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says
- echo i586-unisys-sysv4
- exit ;;
- *:UNIX_System_V:4*:FTX*)
- # From Gerald Hewes .
- # How about differentiating between stratus architectures? -djm
- echo hppa1.1-stratus-sysv4
- exit ;;
- *:*:*:FTX*)
- # From seanf@swdc.stratus.com.
- echo i860-stratus-sysv4
- exit ;;
- i*86:VOS:*:*)
- # From Paul.Green@stratus.com.
- echo ${UNAME_MACHINE}-stratus-vos
- exit ;;
- *:VOS:*:*)
- # From Paul.Green@stratus.com.
- echo hppa1.1-stratus-vos
- exit ;;
- mc68*:A/UX:*:*)
- echo m68k-apple-aux${UNAME_RELEASE}
- exit ;;
- news*:NEWS-OS:6*:*)
- echo mips-sony-newsos6
- exit ;;
- R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
- if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
- else
- echo mips-unknown-sysv${UNAME_RELEASE}
- fi
- exit ;;
- BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
- echo powerpc-be-beos
- exit ;;
- BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
- echo powerpc-apple-beos
- exit ;;
- BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
- echo i586-pc-beos
- exit ;;
- BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
- echo i586-pc-haiku
- exit ;;
- SX-4:SUPER-UX:*:*)
- echo sx4-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-5:SUPER-UX:*:*)
- echo sx5-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-6:SUPER-UX:*:*)
- echo sx6-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-7:SUPER-UX:*:*)
- echo sx7-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-8:SUPER-UX:*:*)
- echo sx8-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-8R:SUPER-UX:*:*)
- echo sx8r-nec-superux${UNAME_RELEASE}
- exit ;;
- Power*:Rhapsody:*:*)
- echo powerpc-apple-rhapsody${UNAME_RELEASE}
- exit ;;
- *:Rhapsody:*:*)
- echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
- exit ;;
- *:Darwin:*:*)
- UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
- case $UNAME_PROCESSOR in
- unknown) UNAME_PROCESSOR=powerpc ;;
- esac
- echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
- exit ;;
- *:procnto*:*:* | *:QNX:[0123456789]*:*)
- UNAME_PROCESSOR=`uname -p`
- if test "$UNAME_PROCESSOR" = "x86"; then
- UNAME_PROCESSOR=i386
- UNAME_MACHINE=pc
- fi
- echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
- exit ;;
- *:QNX:*:4*)
- echo i386-pc-qnx
- exit ;;
- NSE-?:NONSTOP_KERNEL:*:*)
- echo nse-tandem-nsk${UNAME_RELEASE}
- exit ;;
- NSR-?:NONSTOP_KERNEL:*:*)
- echo nsr-tandem-nsk${UNAME_RELEASE}
- exit ;;
- *:NonStop-UX:*:*)
- echo mips-compaq-nonstopux
- exit ;;
- BS2000:POSIX*:*:*)
- echo bs2000-siemens-sysv
- exit ;;
- DS/*:UNIX_System_V:*:*)
- echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
- exit ;;
- *:Plan9:*:*)
- # "uname -m" is not consistent, so use $cputype instead. 386
- # is converted to i386 for consistency with other x86
- # operating systems.
- if test "$cputype" = "386"; then
- UNAME_MACHINE=i386
- else
- UNAME_MACHINE="$cputype"
- fi
- echo ${UNAME_MACHINE}-unknown-plan9
- exit ;;
- *:TOPS-10:*:*)
- echo pdp10-unknown-tops10
- exit ;;
- *:TENEX:*:*)
- echo pdp10-unknown-tenex
- exit ;;
- KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
- echo pdp10-dec-tops20
- exit ;;
- XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
- echo pdp10-xkl-tops20
- exit ;;
- *:TOPS-20:*:*)
- echo pdp10-unknown-tops20
- exit ;;
- *:ITS:*:*)
- echo pdp10-unknown-its
- exit ;;
- SEI:*:*:SEIUX)
- echo mips-sei-seiux${UNAME_RELEASE}
- exit ;;
- *:DragonFly:*:*)
- echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
- exit ;;
- *:*VMS:*:*)
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- case "${UNAME_MACHINE}" in
- A*) echo alpha-dec-vms ; exit ;;
- I*) echo ia64-dec-vms ; exit ;;
- V*) echo vax-dec-vms ; exit ;;
- esac ;;
- *:XENIX:*:SysV)
- echo i386-pc-xenix
- exit ;;
- i*86:skyos:*:*)
- echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
- exit ;;
- i*86:rdos:*:*)
- echo ${UNAME_MACHINE}-pc-rdos
- exit ;;
- i*86:AROS:*:*)
- echo ${UNAME_MACHINE}-pc-aros
- exit ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <
-# include
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-# include
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- c34*)
- echo c34-convex-bsd
- exit ;;
- c38*)
- echo c38-convex-bsd
- exit ;;
- c4*)
- echo c4-convex-bsd
- exit ;;
- esac
-fi
-
-cat >&2 < in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo = `(hostinfo) 2>/dev/null`
-/bin/universe = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/mk/install-manpages.sh b/mk/install-manpages.sh
deleted file mode 100644
index 96a62f2..0000000
--- a/mk/install-manpages.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/sh
-#
-# Public domain
-#
-# Install the manual pages ${MAN} and ${CATMAN} into ${MANDIR} and
-# ${CATMANDIR}, respectively. ${CATMAN} is optional.
-#
-
-for F in ${MAN}; do
- echo "${INSTALL_DATA} $F ${MANDIR}"
- ${INSTALL_DATA} $F ${MANDIR}
- if [ $? != 0 ]; then
- exit 1;
- fi
-done
-
-if [ "${NOCATMAN}" != "yes" ]; then
- for F in ${CATMAN} ignore; do
- if [ "$F" = "ignore" ]; then continue; fi
- CAT=`echo $F | sed 's/.1$$/.cat1/'`
- echo "${INSTALL_DATA} $CAT ${CATMANDIR}"
- ${INSTALL_DATA} $CAT ${CATMANDIR}
- if [ $? != 0 ]; then
- exit 1;
- fi
- done
-fi
diff --git a/mk/mkdep b/mk/mkdep
deleted file mode 100644
index 12e9b9a..0000000
--- a/mk/mkdep
+++ /dev/null
@@ -1,143 +0,0 @@
-#!/bin/sh -
-#
-# $Csoft: mkdep,v 1.8 2003/08/13 03:57:04 vedge Exp $
-# $OpenBSD: mkdep.gcc.sh,v 1.10 2000/07/23 22:22:07 millert Exp $
-# $NetBSD: mkdep.gcc.sh,v 1.9 1994/12/23 07:34:59 jtc Exp $
-#
-# Copyright (c) 1991, 1993
-# The Regents of the University of California. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-# must display the following acknowledgement:
-# This product includes software developed by the University of
-# California, Berkeley and its contributors.
-# 4. Neither the name of the University nor the names of its contributors
-# may be used to endorse or promote products derived from this software
-# without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-# SUCH DAMAGE.
-#
-# @(#)mkdep.gcc.sh 8.1 (Berkeley) 6/6/93
-#
-
-D=.depend # default dependency file is .depend
-append=0
-pflag=
-lflag=
-
-while :
- do case "$1" in
- # -a appends to the depend file
- -a)
- append=1
- shift ;;
-
- # -f allows you to select a makefile name
- -f)
- D=$2
- shift; shift ;;
-
- # the -p flag produces "program: program.c" style dependencies
- # so .o's don't get produced
- -p)
- pflag=p
- shift ;;
-
- # the -l flag produces dependencies for .lo's instead of .o's
- -l)
- lflag=p
- shift ;;
- *)
- break ;;
- esac
-done
-
-ccargs=""
-for arg
-do
- case "${arg}" in
- -I*|-D*|*.c*)
- ccargs="${ccargs} ${arg}"
- ;;
- esac
-done
-
-if [ "${ccargs}" = "" ]; then
- echo 'mkdep: nothing to do'
- exit 0
-fi
-
-if [ $# = 0 ] ; then
- echo 'usage: mkdep [-p] [-l] [-f depend_file] [cc_flags] file ...'
- exit 1
-fi
-
-DTMP=/tmp/mkdep$$
-TMP=$DTMP/mkdep
-OTMP=$DTMP/out
-
-um=`umask`
-umask 022
-if ! mkdir $DTMP ; then
- exit 1
-fi
-
-umask $um
-trap 'rm -rf $DTMP ; trap 2 ; kill -2 $$' 1 2 3 13 15
-
-if [ x$pflag = x ]; then
- echo "${CC} -M ${ccargs}"
- ${CC} -M ${ccargs} > $OTMP
- if [ $? != 0 ]; then
- rm -rf $DTMP
- exit 1
- fi
- if [ x$lflag = x ]; then
- cat $OTMP | sed -e 's; \./; ;g' > $TMP
- else
- cat $OTMP | sed -e 's; \./; ;g' -e 's;\.o:;\.lo:;g' > $TMP
- fi
-else
- echo "${CC} -M ${ccargs}"
- ${CC} -M ${ccargs} > $OTMP
- if [ $? != 0 ]; then
- rm -rf $DTMP
- exit 1
- fi
- cat $OTMP | sed -e 's;\.o[ ]*:; :;' -e 's; \./; ;g' > $TMP
-fi
-
-if [ $append = 1 ]; then
- cat $TMP >> $D
- if [ $? != 0 ]; then
- rm -rf $DTMP
- exit 1
- fi
-else
- mv -f $TMP $D
- if [ $? != 0 ]; then
- rm -rf $DTMP
- exit 1
- fi
-fi
-
-rm -rf $DTMP
-exit 0
diff --git a/mk/tests/imlib2.pm b/mk/tests/imlib2.pm
deleted file mode 100644
index 233ecea..0000000
--- a/mk/tests/imlib2.pm
+++ /dev/null
@@ -1,37 +0,0 @@
-sub Test
-{
- my ($ver, $pfx) = @_;
-
- MkExecPkgConfig($pfx, 'imlib2', '--modversion', 'IMLIB2_VERSION');
- MkExecPkgConfig($pfx, 'imlib2', '--cflags', 'IMLIB2_CFLAGS');
- MkExecPkgConfig($pfx, 'imlib2', '--libs', 'IMLIB2_LIBS');
- MkIfNE('${IMLIB2_VERSION}', '');
- MkCompileC('HAVE_IMLIB2', '${IMLIB2_CFLAGS}', '${IMLIB2_LIBS}', << 'EOF');
-#include
-#include
-#include
-
-int
-main(int argc, char *argv[])
-{
- imlib_context_set_display(NULL);
-
- return (0);
-}
-EOF
- MkSaveIfTrue('${HAVE_IMLIB2}', 'IMLIB2_CFLAGS', 'IMLIB2_LIBS');
- MkElse;
- MkPrint('no');
- MkSaveUndef('HAVE_IMLIB2');
- MkEndif;
- return (0);
-}
-
-BEGIN
-{
- $DESCR{'imlib2'} = 'Imlib2 library (http://docs.enlightenment.org/api/imlib2/html)';
- $TESTS{'imlib2'} = \&Test;
- $DEPS{'imlib2'} = 'cc,x11';
-}
-
-;1
diff --git a/mk/tests/xft.pm b/mk/tests/xft.pm
deleted file mode 100644
index 409e10e..0000000
--- a/mk/tests/xft.pm
+++ /dev/null
@@ -1,37 +0,0 @@
-
-sub Test
-{
- my ($ver, $pfx) = @_;
-
- MkExecPkgConfig($pfx, 'xft', '--modversion', 'XFT_VERSION');
- MkExecPkgConfig($pfx, 'xft', '--cflags', 'XFT_CFLAGS');
- MkExecPkgConfig($pfx, 'xft', '--libs', 'XFT_LIBS');
- MkIfNE('${XFT_VERSION}', '');
- MkCompileC('HAVE_XFT', '${XFT_CFLAGS}', '${XFT_LIBS}', << 'EOF');
-#include
-#include
-#include
-
-int
-main(int argc, char *argv[])
-{
- XftFontOpenName(NULL, 0, NULL);
- return (0);
-}
-EOF
- MkSaveIfTrue('${HAVE_XFT}', 'XFT_CFLAGS', 'XFT_LIBS');
- MkElse;
- MkPrint('no');
- MkSaveUndef('HAVE_XFT');
- MkEndif;
- return (0);
-}
-
-BEGIN
-{
- $DESCR{'xft'} = 'X11 xft extension';
- $TESTS{'xft'} = \&Test;
- $DEPS{'xft'} = 'cc,x11';
-}
-
-;1
diff --git a/mk/tests/xinerama.pm b/mk/tests/xinerama.pm
deleted file mode 100644
index 20a1644..0000000
--- a/mk/tests/xinerama.pm
+++ /dev/null
@@ -1,38 +0,0 @@
-
-sub Test
-{
- my ($ver, $pfx) = @_;
-
- MkExecPkgConfig($pfx, 'xinerama', '--modversion', 'XINERAMA_VERSION');
- MkExecPkgConfig($pfx, 'xinerama', '--cflags', 'XINERAMA_CFLAGS');
- MkExecPkgConfig($pfx, 'xinerama', '--libs', 'XINERAMA_LIBS');
- MkIfNE('${XINERAMA_VERSION}', '');
- MkCompileC('HAVE_XINERAMA', '${XINERAMA_CFLAGS}', '${XINERAMA_LIBS}', << 'EOF');
-#include
-#include
-#include
-
-int
-main(int argc, char *argv[])
-{
- XineramaQueryExtension(NULL, NULL, NULL);
-
- return (0);
-}
-EOF
- MkSaveIfTrue('${HAVE_XINERAMA}', 'XINERAMA_CFLAGS', 'XINERAMA_LIBS');
- MkElse;
- MkPrint('no');
- MkSaveUndef('HAVE_XINERAMA');
- MkEndif;
- return (0);
-}
-
-BEGIN
-{
- $DESCR{'xinerama'} = 'X11 Xinerama library';
- $TESTS{'xinerama'} = \&Test;
- $DEPS{'xinerama'} = 'cc,x11';
-}
-
-;1
diff --git a/mk/tests/xrandr.pm b/mk/tests/xrandr.pm
deleted file mode 100644
index e624e18..0000000
--- a/mk/tests/xrandr.pm
+++ /dev/null
@@ -1,38 +0,0 @@
-
-sub Test
-{
- my ($ver, $pfx) = @_;
-
- MkExecPkgConfig($pfx, 'xrandr', '--modversion', 'XRANDR_VERSION');
- MkExecPkgConfig($pfx, 'xrandr', '--cflags', 'XRANDR_CFLAGS');
- MkExecPkgConfig($pfx, 'xrandr', '--libs', 'XRANDR_LIBS');
- MkIfNE('${XRANDR_VERSION}', '');
- MkCompileC('HAVE_XRANDR', '${XRANDR_CFLAGS}', '${XRANDR_LIBS}', << 'EOF');
-#include
-#include
-#include
-
-int
-main(int argc, char *argv[])
-{
- XRRQueryExtension(NULL, NULL, NULL);
-
- return (0);
-}
-EOF
- MkSaveIfTrue('${HAVE_XRANDR}', 'XRANDR_CFLAGS', 'XRANDR_LIBS');
- MkElse;
- MkPrint('no');
- MkSaveUndef('HAVE_XRANDR');
- MkEndif;
- return (0);
-}
-
-BEGIN
-{
- $DESCR{'xrandr'} = 'X11 xrandr extension';
- $TESTS{'xrandr'} = \&Test;
- $DEPS{'xrandr'} = 'cc,x11';
-}
-
-;1
diff --git a/src/draw.c b/src/draw.c
index 936c8f9..8f33f1f 100644
--- a/src/draw.c
+++ b/src/draw.c
@@ -39,7 +39,8 @@
* \param y Y position
* \param name Path of the image
*/
-static void draw_image(Drawable dr, int x, int y, int w, int h, char *name)
+static void
+draw_image(Drawable dr, int x, int y, int w, int h, char *name)
{
Imlib_Image image;
diff --git a/src/init.c b/src/init.c
index 8ba69cb..349dde0 100644
--- a/src/init.c
+++ b/src/init.c
@@ -80,6 +80,9 @@ init_font(void)
int d;
XFontStruct **xfs = NULL;
+ /* locale support */
+ setlocale(LC_CTYPE, "");
+
if(!conf.font)
conf.font = xstrdup("fixed");
diff --git a/src/wmfs.h b/src/wmfs.h
index 641d5c2..00ae187 100644
--- a/src/wmfs.h
+++ b/src/wmfs.h
@@ -50,6 +50,7 @@
#include
#include
#include
+#include
#include
#include
#include