The dnsmasq target depends on .configured and $(objs). .configured does an rm
-f *.o. Yet the only thing telling make to build the .configured target before
the $(objs) target was the order of the dependencies of the dnsmasq target. We
can't rely on that order when doing a paralllel make build, so add an explicit
rule to enforce that order.
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Shrikant Bobade <Shrikant_Bobade@mentor.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Commit 6d781369 warranted a PE bump but didn't include it. Update it,
correct a typo in EXTRA_OECONF and explicitly disable c-ares resolver at
the same time.
Acked-by: Armin Kuster <akuster@mvista.com>
Acked-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Minor tweaks to the README to make the email suggestion follow the format
used in other meta-openembedded README files and adding clarification on
building wireshark in a GUI environment.
Acked-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
This should address issues found in test-dependencies 2014-07-25
wireshark/wireshark/latest lost dependency on libcap libnl libnl-genl libnl-nf libnl-route portaudio-v19 sbc
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* Inital wireshark support on gtk+, gtk3
* README with additional info
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* Dead peer detection (DPD) is a method that network devices use to verify
the current existence and availability of other peer devices.
* NAT traversal (sometimes abbreviated as NAT-T) is a general term for
techniques that establish and maintain Internet protocol connections
traversing network address translation (NAT) gateways
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
1. use PACKAGECONFIG
2. add three patches which will add the address check, to avoid SEGFAULT
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
it will lead to QA failure, since .debug dir can not be installed into dbg package
ERROR: QA Issue: non debug package contains .debug directory: openvpn path
/work/core2-64-wrs-linux/openvpn/2.3.4-r0/packages-split/openvpn/usr/lib64i
/openvpn/plugins/.debug/openvpn-plugin-down-root.so [debug-files]
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
- Added .bb for version 2.3.4.
- The download URL was broken; it's changed to reflect where the website
points to.
- Force use of iproute2, which is generally recommended when running
OpenVPN as an unprivileged user. Ref:
http://community.openvpn.net/openvpn/wiki/UnprivilegedUser
- Explicitly add libpam to DEPENDS if pam is enabled, and disable the
auth-pam plugin if pam is not enabled.
- Pass the path to the 'ip' utility to the configure script to keep it
from trying to find it on the host.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
1. update the patch tcpdump_configure_no_-O2.patch
2. do not check libdlpi dependence on cross-compile, or else it will
cause do_qa_configure to fail.
3. do not check libpcap dependence, since the libpcap has been added
into DEPENDS, or else it will cause do_qa_configure to fail
4. make the check of getaddrinfo work on cross-compile
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Fixed SRC_URI:
* ${PN} -> ${BPN}, use ${BP} if it was ${PN}-${PV}
* ${P} -> ${BP}
Otherwise we would meet do_fetch errors when we do the multilib, native
or nativesdk build.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
memcached 1.4.15 has some configuration errors:
configure:5798: error: cannot run test program while cross compiling
Uprev has the needed fix for the configuration error and some other fixes.
Signed-off-by: Amy Fong <amy.fong@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* These recipes all use pkg-config in some way but were missing
dependencies on the tool, this patch adds them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
building rquota_xdr.c depends on a head file, which is generated
when building, so add the dependency to ensure the header file is
generated firstly.
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
It needs autotools-brokensep, otherwise do_configure error:
cat: config/pthread.c: No such file or directory
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
It needs autotools-brokensep, otherwise do_configure error:
LifetimeLibrary.cpp:1:49: fatal error: utilspp/singleton/SingletonHolder.hpp: No such file or directory
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
It needs autotools-brokensep, otherwise do_compile error:
src/defines.h:5:18: fatal error: tcpr.h: No such file or directory
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
It needs autotools-brokensep, otherwise do_install error:
make: *** No rule to make target `install'. Stop.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Common Information Model (CIM) is a model for describing overall
management information in a network or enterprise environment. CIM
consists of a specification and a schema. The specification defines the
details for integration with other management models. The schema
provides the actual model descriptions.
Signed-off-by: Yao Xinpan <yaoxp@cn.fujitsu.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Do the patching in the do_patch phase instead of the compile
phase. That way if the compile phase needs to be rerun
patching isn't attempted a second time.
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Joe MacDonald <joe@deserted.net>
FILES_${PN} is set to null in original .bb file, this would cause
ndisc6 main package is missing, then one build error will happen:
ERROR: ndisc6 not found in the base feeds (qemux86 i586 x86 noarch any all).
To fix this, need to set ALLOW_EMPTY_${PN} = "1".
Signed-off-by: Xudong.zhu <xudong.zhu@windriver.com>
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
This patch properly uses the path variables and fixes ntptrace and
ntp-wait, just in case perl is not installed with the hardcode path.
Signed-off-by: Rahat Mahbub <rahat.mahbub@windriver.com>
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Fixes a bug with libvirt and DHCP, which is fixed in 2.66.
"Handle the situation where libc headers define
SO_REUSEPORT, but the kernel in use doesn't, to cope with
the introduction of this option to Linux. Thanks to Rich
Felker for the bug report."
Signed-off-by: Christian Ziethén <Christian.Ziethen@enea.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
'--with-ssl=DIR' configure parameter expects the location of the
libraries and include files in the sysroot. This means the directory
containing the 'lib' and 'include' subdirectories, not the include
directory itself.
This fixes an error at configure time:
checking
<local-path>/tmp/sysroots/ccimx6adpt/usr/include/include/openssl/engine.h
usability... no
(notice duplicated include entry in above line)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
If ntp is built without libcap, it refuses to start with the following
message:
Starting ntpd: /usr/sbin/ntpd: The ``user'' option has been disabled -- built
without --enable-clockctl or --enable-linuxcaps
ntpd - NTP daemon program - Ver. 4.2.6p5
USAGE: ntpd [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
By adding cap to the PACKAGECONFIG the default runs. In the
future, someone could add an option for using clockctl.
Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Joe MacDonald <joe@deserted.net>
