OpenSAF uses OpenHPI if available. If openhpi happens to be in
PACKAGECONFIG from the build, turn on support in OpenSAF and add it to the
DEPENDS list.
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
1) WARNING: The recipe opensaf is trying to install files into a
shared area when those files already exist,so set
--libdir=${libdir}/opensaf
2) Add systemd service file plmcboot.service and plmcd.service.
Signed-off-by: Li Xin <lixin.fnst@cn.fujitsu.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
1.Remove postfix-add-db6-support.patch which is not needed,
since it is backported from upstream.
2.update install.patch and makedefs.patch that context changes.
3.Install smtp-sink which listens on the named host (or address) and port.
It takes SMTP messages from the network and throws them away.
Ref: http://www.postfix.org/smtp-sink.1.html
Signed-off-by: Li Xin <lixin.fnst@cn.fujitsu.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Bitbake is likely to require this parameter in future, add
the default value.
Patch generated with the command:
sed -e 's:\(getVar([^,()]*\)\s*):\1, False):g' -i `grep -ril getVar *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
daemon_directory is set to /usr/lib/postfix which causes daemon postfix
fails to start on 64 bits target if enable multilib. Set daemon_directory
with libexecdir to fix it.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
SECTION has been used inconsistently throughout the recipes in this layer.
Convert them to all use the same convention.
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
We should set group of ${localstatedir}/lib/postfix to 'nogroup' not 'postfix',
actually it's done at the below, so remove this useless code.
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
pcap-config should not be used for determining how to build against
libpcap in a yocto environment.
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Specifying the plugin directory with a trailing '/' hit this failure in
the install rule:
... snip ...
install-exec-local: $(INSTALLOSX)
@if test "$(plugindir)" != "$(prefix)/lib/sasl2"; then \
echo "********************************************************"; \
echo "* WARNING:"; \
echo "* Plugins are being installed into $(prefix)/lib/sasl2,"; \
echo "* but the library will look for them in $(plugindir)."; \
echo "* You need to make sure that the plugins will eventually"; \
echo "* be in $(plugindir) -- the easiest way is to make a"; \
echo "* symbolic link from $(plugindir) to $(prefix)/lib/sasl2,"; \
echo "* but this may not be appropriate for your site, so this"; \
echo "* installation procedure won't do it for you."; \
echo "*"; \
echo "* If you don't want to do this for some reason, you can"; \
echo "* set the location where the library will look for plugins"; \
echo "* by setting the environment variable SASL_PATH to the path"; \
echo "* the library should use."; \
echo "********************************************************"; \
fi
Work around that.
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
postfix should be started by default, so that the root user can
receive mail, and if init is not systemd, it is started by default
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
iscsid is installed into ${sbindir}, which is /usr/sbin, not /sbin/,
so fix it in /etc/iscsi/iscsid.conf
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
The default configuration for OpenSAF creates /run and /var/lock during
install time. Tweak the recipe to use ${localstatedir} as other recipes
do, and clean up at the end of do_install.
Swap the hard-coded SRC_URI with ${SOURCEFORGE_MIRROR} while we're at it.
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
dropped proftpd-sftp.patch as it is included in update.
combined make.patch, move-pidfile-to-var-run.patch, move-runfile-to-var-run.patch into
build_fixup
Added several packagesconfig options (too much eggnog)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
dnrd is a proxying nameserver. It forwards DNS queries to the appropriate
nameserver, but can also act as the primary nameserver for a subnet behind
a firewall. It also has features such as caching DNS requests, support for
DNS servers, cache poisoning prevention, TCP support, etc.
Signed-off-by: Qian Lei <qianl.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
LLDPAD contains the Linux user space daemon and configuration tool for
Intel LLDP Agent with Enhanced Ethernet support for the Data Center.
Signed-off-by: Qian Lei <qianl.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This patch is for Freescale QorIQ DPAA and eTSEC which support 1588 hardware
assist module, and mainly uses SO_TIMESTAMPING API for HW timestamp and PHC
API.
Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
aliases.db should be created by postinstall script, but failed since
queue_directory is not includes root dir ${D}:
------
|newaliases: fatal: chdir /var/spool/postfix: No such file or directory
------
initscript will recall newaliases before start postfix daemon, the similar
method, which run aliasesdb to create aliases.db when using systemd, is
introduced to fix this issue.
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
This solves the following warning:
squid-3.4.7: squid requires /bin/bash, /usr/bin/perl, but no providers in its
RDEPENDS [file-rdeps]
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
This solves the following warning:
WARNING: QA Issue: squid rdepends on libnetfilter-conntrack, but it isn't a
build dependency? [build-deps]
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
1. Fix radvd.service to start daemon correctly.
2. Make the daemon run under 'radvd' user by default.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
make write_behind to return 0 if a empty file is written, to
distinguish a true writing failure[on which the write_behind
will return -1], then the annoying wrong log will disappear.
____
|Error code 3: Disk full or allocation exceeded
-----
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
This reverts commit b2eb21a5fbcb065e84ed582e87de21bdc3082f00.
It make 3d8520a0b411[tftp-hpa: add error check for disk filled up]
unable to work
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
