WARNING: QA Issue: vsftpd: Files/directories were installed but not shipped
/run
/run/vsftpd
/run/vsftpd/empty
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Postfix is Wietse Venema's mail server that started life at IBM
research as an alternative to the widely-used Sendmail program.
Postfix attempts to be fast, easy to administer, and secure.
The outside has a definite Sendmail-ish flavor, but the inside
is completely different.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
AR is defined as "ar cq" in MCONFIG.in, then "cq" is no longer needed in
Makefile of common and libs subdir.
#grep AR MCONFIG.in
AR = ar cq
#
#grep AR common/Makefile
$(AR) $(LIB) $(OBJS)
#
But MCONFIG maybe not able to be generated by MCONFIG.in, common/Makefile
allows this condition [Note the - before include]
#grep MCONFIG common/Makefile
-include ../MCONFIG
#
then AR from building environment is used, but it not included the parameter
"cq", and lead to below error, so add the "cq" to AR to fix this issue.
i586-wrs-linux-ar libcommon.a tftpsubs.
i586-wrs-linux-ar: two different operation options specified
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* These recipes all use pkg-config in some way but were missing
dependencies on the tool, this patch adds them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
In ascii mode, if the CR and LF was separated into different transfer
blocks, This LF will be just dropped instead of replacing the previous
CR. Add a checking on the first character to fix it.
Signed-off-by: Zhang Xiao <xiao.zhang@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
It needs autotools-brokensep, otherwise do_install error:
install: cannot stat `vblade-20/vblade': No such file or directory
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
It needs autotools-brokensep, otherwise do_install error:
make: *** No rule to make target `install'. Stop.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Otherwise do_configure failed:
sed: can't read configure.in: No such file or directory
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
It needs autotools-brokensep, otherwise do_configure error:
sed: can't read sasldb/db_berkeley.c: No such file or directory
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
It needs autotools-brokensep, otherwise do_compile error:
proftpd-1.3.4b/include/version.h:1:24: fatal error: buildstamp.h: No such file or directory
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* when sysv script is removed QA warn is shown:
atftp-0.7.1+gitAUTOINC+be3291a18c: atftp: Files/directories were installed but not shipped
/etc
empty dir doesn't cost much, so just include it
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
When run 'service radvd stop' in case radvd is not started/running,
we'll get warnings like this:
Stopping radvd: no /usr/sbin/radvd found; none killed
/etc/init.d/radvd: warning: cannot restore settings
radvd.
We could by pass these OPs by just check if the service is running
or not so eliminate possible warnings.
Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Changes:
- rename SUMMARY with length > 80 to DESCRIPTION
- rename DESCRIPTION with length < 80 to (non present tag) SUMMARY
- drop final point character at the end of SUMMARY string
- remove trailing whitespace of SUMMARY line
Note: don't bump PR
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Update radvd to version 1.9.8
* remove change-scanner-dependency.patch which is merged
* add 'status' subcommand for radvd.init
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Use /bin/false as the login shell, just like what Ubuntu does,
otherwise there might be secure issue; add /var/lib/ftp as user
ftp home-dir.
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
When ntpd starts, it will create a daemon to connect this invalid server,
and fail, then ntpd will create other daemon to connect the local-only
(127.127.1.0) server.
The users should be aware that they need to configure the correct ntp
servers, a invalid server will lead to a redundant daemon, so it is better
to comment this example server to wait user to configure
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
/var/run/ is more suitable to store pidfile for OE, and this fixes
"/etc/init.d/proftpd stop" failure too, since this script assumes
the pidfile is under /var/run
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Proftpd is meant to be a system user, not a normal user of the
system so lets pass the correct parameters to the system.
Just add --system param when creating ftp group.
Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
If we build a project without systemd support on a system that has systemd
enabled, the following QA items get flagged:
/lib
/lib/systemd
/lib/systemd/system
/lib/systemd/system/autofs.service
Trying to keep the solution to the problem as contained as possible in a
way that may be accepted up-stream by adding an optional parameter to the
--with-systemd flag.
Signed-off-by: Joe MacDonald <joe@deserted.net>
* Remove all PR = "r0" from all .bb files in meta-oe repo. This was done
with the command sed -e '/^PR.*=.*r0\"/d' meta*/recipes*/*/*.bb -i
* We've switching to the PR server, PR bumps are no longer needed and
this saves people either accidentally bumping them or forgetting to
remove the lines (r0 is the default anyway).
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
`/etc/init.d/populate-volatile.sh update' only needs to run in case
of an on-target installation. And it should have a prerequisite that
the script is executable.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
saslpasswd2 is used by an administrator to set a user's sasl password,
setting a default one in pkg_postinst in not only unnecessary but also
inappropriate.
Besides, running saslpasswd2 takes a significant amount of time to finish,
so this pkg_postinst will make the first boot take longer time.
According to the above two reasons, the patch remove the pkg_postint.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
While making use of the cyrus-sasl library an external application
will most likely include sasl.h which will cause compilation failures
if steps haven't been taken to define size_t. This should not be the
responsibility of the application building against the sasl library
but rather handled already in sasl.h. Here we ensure sasl.h has the
proper includes to have size_t defined before it is used.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
The tftp-hpa package installs /var/lib/tftpboot and tftpd-hpa is
configured to use that directory, but the default points at /svc/tftpboot.
Correct that so the default points to a location that exists when the
package is installed.
Signed-off-by: Joe MacDonald <joe@deserted.net>
If ${D}/run doesn't exist, the following statement will have non-zero
exit code, which leads to do_install failure.
test -d ${D}/run && rmdir ${D}/run
Modify it to use the if statement to make the do_install task succeed
no matter ${D}/run exists or not.
Also, this patch removes the unused /var/run directory. Leaving that
directory there will result in /run directory created before splitting
package, which in turn lead to 'installed-vs-shipped' QA error or QA
warning.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
"test -z ${PAMLIB}" in do_install() may report error if ${PAMLIB}
has space chars. This commit added double quotes to wrap it in
case of errors.
Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Otherwise, configure will try to auto-detect using host paths.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Joe MacDonald <joe@deserted.net>
standalone daemon exits as recipe installs file as tftpd-hpa
* Changed script so it can consult /etc/default, as daemon name may be
subject to change.
* Changed the default name to match the recipe
Signed-off-by: David Turgeon <david.turgeon@gmail.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Change default value of secure_chroot_dir to /var/run/vsftpd/empty, add
volatiles entry for it, to ensure it won't fail to start with error:
"500 OOPS: vsftpd: not found: directory given in 'secure_chroot_dir':/var/share/empty"
This shows up in both standalone mode or started by xined.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Add error check when the write-buffer is finally flushed to the file,
the caller can detect if the disk filled up (or had an i/o error) and
return a NOSAPCE nak to the other side.
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
It's not necessary to specify the protocol parameter when it's the
default protocol for the fetcher, e.g. the default protocol for
git fetcher it git, "protocol=git" isn't needed.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This fixes the build on at least Fedora 19 x86_64 as a host; we were
trying to link a non-PIC static object into a shared library.
Signed-off-by: Colin Walters <walters@verbum.org>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
A minor bit of reorganization of the cyrus-sasl recipe directory in
preparation for a build fix.
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
Upgrade vsftpd to 3.0.0 with below modification:
1. more strict access limitation, like: do not allow anonymous access
2. use vsftpd.ftpusers and vsftpd.user_list to confine user access
3. enable pam if DISTRO_FEATURE includes pam
4. enable tcp-wrapper
5. install vsftpd.conf with 0600 permission, not 0755
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
1. Fix hardcoded libdir
2. configure cyrus-sasl based on PACKAGECONFIG
3. create user by inherit useradd
4. add -fPIC to CFLAG to fix the below building failure:
ld: ../sasldb/.libs/libsasldb.a(db_berkeley.o): relocation R_X86_64_32S against
`.rodata' can not be used when making a shared object; recompile with -fPIC
../sasldb/.libs/libsasldb.a(db_berkeley.o): could not read symbols: Bad value
The cause is that libsasldb.a is built twice since {.c.o: and .c.lo} co-exist, one
with -fPIC, other without -fPIC. if no -fPIC library follows behind, this error
will appear. so we enable -fPIC no matter whatever objects are built.
5. The version of db in oe-core is 5.0
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
If the gssapi libraries are compiled before cyrus-sasl, configure will call
AC_TRY_RUN to check if gssapi libraries support SPNEGO, but calling AC_TRY_RUN
will fail on cross-compile environment.
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
The Cyrus SASL plugins are loaded without their version number so the
plugin *.so symbolic links need to be placed in the cyrus-sasl package
rather than the cyrus-sasl-dev package.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
autofs's lib sources have a dependency on a number of files that are
generated by rpcgen during buildtime.
fix a typo in configure.in
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
WARNING: QA Issue: proftpd: Files/directories were installed but not shipped
/home
/home/ftp
/home/ftp/pub
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
