Changes:
- rename SUMMARY with length > 80 to DESCRIPTION
- rename DESCRIPTION with length < 80 to (non present tag) SUMMARY
- drop final point character at the end of SUMMARY string
- remove trailing whitespace of SUMMARY line
Note: don't bump PR
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The configure script of netcf checks the HOST setup to identify the
network interface. This means it checks for Red Hat, SuSE, debian,
Ubuntu, etc. As this is an embedded cross build, it doesn't seem to
make sense to check the HOST in the first place to determine info for
the TARGET.
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
We will get the following ERROR/WARN if we enable systemd and
the installed-vs-shipped check in QA:
ERROR: QA Issue: ntp: Files/directories were installed but not shipped
/lib/systemd/ntp-units.d
/lib/systemd/ntp-units.d/60-ntpd.list
Signed-off-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The default ntp.conf file does the right thing but one of the comments is
a bit misleading based on the active parts of the file changing a few
times. Update the comment to accurately describe what is happening in the
configuration file and what a user should do next.
Signed-off-by: Joe MacDonald <joe@deserted.net>
When ntpd starts, it will create a daemon to connect this invalid server,
and fail, then ntpd will create other daemon to connect the local-only
(127.127.1.0) server.
The users should be aware that they need to configure the correct ntp
servers, a invalid server will lead to a redundant daemon, so it is better
to comment this example server to wait user to configure
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
tcpreplay - a suite of GPLv3 licensed tools for UNIX operating systems
which gives you the ability to use previously captured traffic in libpcap
format to test a variety of network devices.
Signed-off-by: Zongchun Yu <Zongchun.Yu@freescale.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
If ntpd script is being called by a non-root user using sudo,
it will fail as follows:
/etc/init.d/ntpd restart
Stopping ntpd: /etc/init.d/ntpd: line 29: start-stop-daemon:
command not found
done
Starting ntpd: /etc/init.d/ntpd: line 24: start-stop-daemon:
command not found
done
This is because /etc/init.d/ntpd calls start-stop-daemon which
is in /sbin (not in the default path for non-root users)
Explicitly configure the PATH to include /sbin.
Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Reworked to set PATH instead of hardcode the location of start-stop-daemon
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
We don't have a proper help2man so building the manpages fails; just
disable building them to fix this as we do elsewhere.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
A minimum dnsmasq version of 2.5.9 is required deal with IPv6 link local
addresses. So instead of just going to the minimum version, we can go
all the way to 2.6.3.
As part of this update, the following changes have been made in addition to
the pure version update:
- PR is dropped in favour of PRSERVER functionality
- dhcp_release is added to the default build, since it is used in the
cleanup phase for virtual machines.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
netcf was orginally introduced in meta-virtualization, since it provides
functionality required by libvirt, but it is otherwise not bound to
virtualization.
So we can move it to meta-networking, and in the process uprev to the
the latest 0.2.3 functinality.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
* Remove all PR = "r0" from all .bb files in meta-oe repo. This was done
with the command sed -e '/^PR.*=.*r0\"/d' meta*/recipes*/*/*.bb -i
* We've switching to the PR server, PR bumps are no longer needed and
this saves people either accidentally bumping them or forgetting to
remove the lines (r0 is the default anyway).
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* make files in bindir/sbindir a bit more deterministic
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
We can use chmod to set the SUID bit for applications in the do_install
task. If we do so, the pkg_postinsts are no longer needed.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
configure python files installation path or else it will use the
default value /usr/lib/python*, which is wrong on 64bit and multilibs
enabled system
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Add --ignore-fail-on-non-empty for rmdir in case there are files in the
directories.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
The 0.3 release was a year ago and git HEAD contains fixes to make it
work with contiki, so build from git instead of backporting all of the
patches.
Based on a patch by Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Taken from [1]:
"However, if the difference between the client time and server time is greater
than the panic threshold, which defaults to 1000 s, the daemon will send a
message to the system log and shut down without setting the clock."
On RTC-less or 'fresh' systems with unpredicatble inital date ntpd will stop
with work undone (note: I did NOT find the message mentioned above - so it
took long way to fix). This is a wide use case for using NTP in production:
No need for initial datetime setup by some operator.
[1] http://doc.ntp.org/4.1.1/debug.htm
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
* read-only rootfs cannot run postinsts on first boot and in this case
it doesn't really have to as we can create cron task in do_rootfs
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
* it fails in do_configure without it
configure.ac:99: error: possibly undefined macro: AC_MSG_ERROR
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.ac:140: error: possibly undefined macro: AC_MSG_WARN
autoreconf: sysroots/x86_64-linux/usr/bin/autoconf failed with exit status: 1
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
1. fix a running issue on PPC, since 'char' type has different range of values
on x86 and on PPC.
2. fix a building issue.
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
ipsec-tools depends on bison-native
enable ipv6 support by DISTRO_FEATURE, and enable shared library support.
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
Add the missing dependency on libbsd
it was not building otherwise. libbsd recipes for OE-Core
has been ported please wait until they are applied
| netcat.c:99:24: fatal error: bsd/stdlib.h: No such file or directory
| #include <bsd/stdlib.h>
| ^
| compilation terminated.
| make: *** [netcat.o] Error 1
| make: *** Waiting for unfinished jobs....
| socks.c:41:32: fatal error: bsd/readpassphrase.h: No such file or directory
| #include <bsd/readpassphrase.h>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
${PN}-utils has greedy expression of capturing all in ${bindir}
and sntp gets swept in too. This move in PACKAGES fixes the problem
and now sntp binary is packaged in sntp package itself.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
