* LIC_FILES_CHKSUM changed because of the introduction of an extra blank
line in the LICENSE file (!)
* Refreshed TLS Next Protocol Negotiation support patch for conflict
with 2.4.7. Thanks to Hongxu Jia for doing this work.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Changes:
- rename SUMMARY with length > 80 to DESCRIPTION
- rename DESCRIPTION with length < 80 to (non present tag) SUMMARY
- drop final point character at the end of SUMMARY string
- remove trailing whitespace of SUMMARY line
Note: don't bump PR
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
In recent versions, upstream has decided to place additional
restrictions on commercial use beyond a standard open source license
(LGPLv3) [1]. This makes it hard to set a LICENSE value that is easily
understood. Of course, as the authors, they have the right to decide
what licensing terms they wish to distribute their project under, and we
could always set LICENSE_FLAGS to denote the extra terms, but this is
somewhat messy and personally I feel less inclined to continue
maintaining this recipe in meta-webserver now, especially since I
originally put it together on my own time. At the moment due to a
branch/commit mismatch it is no longer fetching in any case.
(If someone wants to resurrect this recipe in another layer, they are
more than welcome to do so.)
[1] http://support.ajenti.org/topic/351265-clarify-licensing/
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Previously, modphp estimates endian on host rather than checks it on
target. If the host is little-endian and the target is big-endian,
modphp claims that endian is little. As a result, a memory location
that it is not allowed to access when calling libphp5.so module on
target. It will occur segmentation fault.
This patch enables endian check support for modphp.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Initial recipe created by Steve Arnold. Original build patch and 1.0.10
recipe graciously contributed by bencoh (in #oe on irc.freenode.net).
New recipe and init script contributed by this author. Built and
tested on master branches using author's fork of meta-raspberrypi.
Signed-off-by: stephen.arnold42 <stephen.arnold42@gmail.com>
Signed-off-by: Sébastien Mennetrier <s.mennetrier@innotis.org>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* Remove all PR = "r0" from all .bb files in meta-oe repo. This was done
with the command sed -e '/^PR.*=.*r0\"/d' meta*/recipes*/*/*.bb -i
* We've switching to the PR server, PR bumps are no longer needed and
this saves people either accidentally bumping them or forgetting to
remove the lines (r0 is the default anyway).
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Since both config_var.mk and config.nice will be packaged into sstate cache,
and be reused, add them into SSTATE_SCAN_FILES to replace the hardcoded paths
Signed-off-by: Roy Li <rongqing.li@windriver.com>
We will get the following ERROR/WARN if we enable the
installed-vs-shipped check in QA:
ERROR: QA Issue: cherokee: Files/directories were installed but not shipped
/srv
/srv/www
/srv/www/htdocs
/srv/www/htdocs/index.html
/srv/www/htdocs/images
/srv/www/htdocs/images/cherokee-logo.png
/srv/www/htdocs/images/default-bg.png
/srv/www/htdocs/images/favicon.ico
/srv/www/htdocs/images/powered_by_cherokee.png
I think that we can pack these files into cherokee just like what
apache2 does.
Fedora 17 also packs them
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
There are error messages when restart apache service:
Observed Behavior
======================
root@qemu0:/etc/php# apachectl restart
AH00557: httpd: apr_sockaddr_info_get() failed for qemu0
AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message
root@qemu0:/etc/php# /etc/init.d/apache2 restart
AH00557: httpd: apr_sockaddr_info_get() failed for qemu0
AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message
root@qemu0:/etc/php# /etc/init.d/apache2 stop
AH00557: httpd: apr_sockaddr_info_get() failed for qemu0
AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message
Add 'ServerName localhost:80' to httpd.conf could fix this issue.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
The package is no longer available in the official cherokee site,
so download it from a mirror.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
apxs is installed under /usr/bin/crossscripts of sysroot, its hardcode paths
should be handled when store or extracts the sstate archives.
Signed-off-by: Roy Li <rongqing.li@windriver.com>
when use systemd as a system and service manager, systemd-tmpfiles will replace
/etc/init.d/populate-volatile.sh to handle temporary files, so we need to create
the configuration file for apache2
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Running systemd-tmpfiles --update without specifying a configuration
file results in all tmpfiles.d configuration files being processed.
/usr/lib/tmpfiles.d/systemd.conf creates /run/nologin on boot to
prevent non-root users from logging in while the system is booting.
If systemd-tmpfiles --update is run after the system has started,
it will still create /run/nologin which would prevent non-root users
from logging in with the message "System is booting up.".
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* LIC_FILES_CHKSUM needed to change because the copyright year changed
* Enabled mcrypt since upstream recommend this for acceptable
performance (and we now have a libmcrypt recipe in meta-oe)
* Disabled the opcache; this is a new feature in 5.5 and the configure
check for it currently breaks when cross-compiling.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
pidile was stored in /var/apache2/log which is saved over boots.
This might prevent startup of apache2 on boots. Move it to /run
where pidfiles in general belong.
Changes:
- Remove unnecessary -c option from install
- Add tmpfiles.d config to create /run/nostromo when systemd is
enabled in DISTRO_FEATURES
- Add postinst script to create /run/nostromo using tmpfiles.d if
running systemd (detected by existence of /sys/fs/cgroup/systemd),
otherwise using populate-volatile.sh if it exists
- Remove /var/log/nostromo and /var/run/nostromo from package
Signed-off-by: Jonathan Liu <net147@gmail.com>
The /var/run directory is already created by base-files.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The /var/run directory is already created by base-files.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Remove some mostly superfluous scripts for adding additional mimetype
support that add an explicit dependency on bash.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Copying files and then modifying them is preferred rather than the other
way around because then the modification can never be run twice if the
function is re-executed on an existing work directory.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Fixes the following warning:
WARNING: QA Issue: ELF binary '${WORKDIR}/packages-split/modphp/usr/lib/apache2/modules/libphp5.so' has relocations in .text
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
The fix for the apr-1-config/apu-1-config path issue has been in OE-Core
for some time now (OE-Core commit
ab56f1063a666df5faddd97f44758c8ae378e51c) so we no longer need these
workarounds.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
This is the "supported" fork of thttpd which has a rewritten build
system to avoid the need to patch it, as well as other minor
fixes. The recipe was based on the thttpd recipe in meta-arago-extras
(originally migrated from OE-Classic by
Franklin S. Cooper Jr <fcooper@ti.com>) with the following improvements:
* Set SUMMARY
* Remove PARALLEL_MAKE = "" (new build system should avoid previous issues)
* Use more accurate LICENSE
* Rearrange recipe to conform with current style
* Use += instead of _append for FILES definitions
* Add LSB headers to initscript
* Fix hardcoded ${sbindir} in initscript
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Change PN -> BPN in a number of places so that files are stored in the
correct location and packaged correctly.
Based on a patch by Song.Li <Song.Li@windriver.com> with additional
PN -> BPN replacements.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* This change is only aesthetic (unlike indentation in Python
tasks).
* Some recipes were using tabs.
* Some were using 8 spaces.
* Some were using mix or different number of spaces.
* Make them consistently use 4 spaces everywhere.
* Yocto styleguide advises to use tabs (but the only reason to keep
tabs is the need to update a lot of recipes). Lately this advice
was also merged into the styleguide on the OE wiki.
* Using 4 spaces in both types of tasks is better because it's less
error prone when someone is not sure if e.g.
do_generate_toolchain_file() is Python or shell task and also allows
to highlight every tab used in .bb, .inc, .bbappend, .bbclass as
potentially bad (shouldn't be used for indenting of multiline
variable assignments and cannot be used for Python tasks).
* Don't indent closing quote on multiline variables
we're quite inconsistent wheater it's first character on line
under opening quote or under first non-whitespace character in
previous line.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Acked-by: Koen Kooi <koen@dominion.thruhere.net>
* enable mysql option in PACKAGECONFIG
* add patch to support autoconf 2.59+ so we can use
autotools do_configure to fix a libtool cross-compile issue
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
revert pthread-check.patch which hacks the old configure,
instead, add one against threads.m4 to enable pthread support
when cross-compiling.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
