This recipe currently relies on EXTRA_OEMAKE having been to set to
"-e MAKEFLAGS=" in bitbake.conf to operate. It is necessary to make
this explicit so that the default in bitbake.conf can be changed.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
1) Upgrade opensaf from 4.6.0 to 4.7.0.
2) Delete two patches,since they are not needed any more.
Revert_imma_client_node_replyPending_to_unsigned_char.patch
Fix_GCC_5.1.0_compiler_warning.patch
Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
While hostname is numeric, start postfix failed
...
root@qemux86-64:~# hostname 1.2.3.4
root@qemux86-64:~# systemctl restart postfix
|Job for postfix.service failed because the control process exited
with error code. See "systemctl status postfix.service" and
"journalctl -xe" for details.
root@qemux86-64:~# systemctl status postfix -l
Dec 02 08:05:40 1.2.3.4 aliasesdb[535]: /usr/sbin/postconf: fatal: unable to use my own hostname
Dec 02 08:05:41 1.2.3.4 aliasesdb[535]: newaliases: warning: valid_hostname: numeric hostname: 1.2.3.4
Dec 02 08:05:41 1.2.3.4 postfix/sendmail[537]: warning: valid_hostname: numeric hostname: 1.2.3.4
Dec 02 08:05:41 1.2.3.4 aliasesdb[535]: newaliases: fatal: unable to use my own hostname
Dec 02 08:05:42 1.2.3.4 postfix[540]: warning: valid_hostname: numeric hostname: 1.2.3.4
Dec 02 08:05:42 1.2.3.4 postfix[540]: fatal: unable to use my own hostname
...
Refer meta/recipes-core/initscripts/initscripts-1.0/hostname.sh in oe-core,
add check_hostname.sh and invoke it before postfix start, if the hostname
is invalid, set "localhost" to main.cf.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
configure the systemd unit file dir, otherwise it will be auto-checked
by 'pkg-config --variable=systemdsystemunitdir systemd', but if systemd
is not built firstly, and the the unit file will not be installed, and
lead to below error:
ERROR: Function failed: SYSTEMD_SERVICE_lldpd value lldpd.service does not exist
and disable sysusersdir, since sysuser is not used currently.
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Based on this thread:
http://comments.gmane.org/gmane.comp.handhelds.openembedded/70890
it seems that lldpd is a more complete implementation of the LLDP
protocol. Remove this implementation to provide better direction to
newcomers and to attempt to focus support for a single implementation in
the meta-networking layer.
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
It hardcoded to assign vmail's userid and groupid with 5000,
which caused the following useradd/groupadd is increased from
5000 at do_root time. Such as 'tracing' group id is 5001
(tracing group is added in lttng-tools).
It is better to allocate it dynamically.
BTW, you may google to find the hardcoded 5000 in following site:
https://help.ubuntu.com/community/PostfixVirtualMailBoxClamSmtpHowto
In its main.cf, it also hardcoded virtual_uid_maps and virtual_gid_maps.
...
virtual_uid_maps = static:5000
virtual_gid_maps = static:5000
..
But in meta-oe's main.cf_2.0, it assigned virtual_uid_maps and
virtual_gid_maps with a search.
...
virtual_uid_maps = static:`grep vmail /etc/passwd | cut -d ":" -f 3`
virtual_gid_maps = static:`grep vmail /etc/passwd | cut -d ":" -f 4`
...
So please feel free to forget 5000.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Don't enable GNU atomic operations for all targets, it fails on
powerpc and mips:
AtomicWord.h: undefined reference to `__sync_fetch_and_add_8'
collect2: error: ld returned 1 exit status
Refer to https://gcc.gnu.org/bugzilla/show_bug.cgi?id=56300:
There is no hardware support for 8 bytes atomic operations on
32-bit MIPS targets.
The 32-bit PowerPC fails as well.
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
1. fix the building failure when host is gcc5
2. fix the building failure when DEBUG_BUILD is 1 by removal of -Werror
Remove -Werror, since it is suitable to develop only; otherwise when
gcc adds -O0 option to compile codes, the error will be generated
since the warning:
//# warning _FORTIFY_SOURCE requires compiling with optimization (-O)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
1. Remove the squid-change-ksh-referen*.patch which is not needed, since
3.5.7 did not use ksh by default.
2. Update the checksum of COPYING,since the date in it has been changed.
3. Define BUILDCXXFLAGS, otherwise the target gcc options -std=c++11 will
add into it, and lead to building failure since host gcc maybe not
support "-std=c++11"
4. Assume to support GNU atomic operations by default, the running check
on cross-compile setup does not work
5. enable basic auth by checking the DISTRO_FEATURE, and the default
dependency on db, opensasl and openldap nis have been set, so enable
them by default.
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
atftp fails to build with gcc 5.2:
git/tftp_def.h:54:14: warning: inline function 'Strncpy' declared but never defined
git/argz.c:44:8: error: redefinition of 'argz_next'
GCC 5 defaults to -std=gnu11 instead of -std=gnu89. The semantics of
inline function changes. Pass '-std=gnu89' to gcc to compile atftp.
Ref:
https://gcc.gnu.org/gcc-5/porting_to.html
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Delete ptpd-add-dpaa-etsec-support.patch.The reason is the following:
- The ptpd-add-dpaa-etsec-support.patch does not suitable for new version.
- The upstream didn't accept this patch.
Signed-off-by: Lei Maohui <leimaohui@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
OpenSAF uses OpenHPI if available. If openhpi happens to be in
PACKAGECONFIG from the build, turn on support in OpenSAF and add it to the
DEPENDS list.
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
1) WARNING: The recipe opensaf is trying to install files into a
shared area when those files already exist,so set
--libdir=${libdir}/opensaf
2) Add systemd service file plmcboot.service and plmcd.service.
Signed-off-by: Li Xin <lixin.fnst@cn.fujitsu.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
1.Remove postfix-add-db6-support.patch which is not needed,
since it is backported from upstream.
2.update install.patch and makedefs.patch that context changes.
3.Install smtp-sink which listens on the named host (or address) and port.
It takes SMTP messages from the network and throws them away.
Ref: http://www.postfix.org/smtp-sink.1.html
Signed-off-by: Li Xin <lixin.fnst@cn.fujitsu.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Bitbake is likely to require this parameter in future, add
the default value.
Patch generated with the command:
sed -e 's:\(getVar([^,()]*\)\s*):\1, False):g' -i `grep -ril getVar *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
daemon_directory is set to /usr/lib/postfix which causes daemon postfix
fails to start on 64 bits target if enable multilib. Set daemon_directory
with libexecdir to fix it.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
SECTION has been used inconsistently throughout the recipes in this layer.
Convert them to all use the same convention.
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
We should set group of ${localstatedir}/lib/postfix to 'nogroup' not 'postfix',
actually it's done at the below, so remove this useless code.
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
pcap-config should not be used for determining how to build against
libpcap in a yocto environment.
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Specifying the plugin directory with a trailing '/' hit this failure in
the install rule:
... snip ...
install-exec-local: $(INSTALLOSX)
@if test "$(plugindir)" != "$(prefix)/lib/sasl2"; then \
echo "********************************************************"; \
echo "* WARNING:"; \
echo "* Plugins are being installed into $(prefix)/lib/sasl2,"; \
echo "* but the library will look for them in $(plugindir)."; \
echo "* You need to make sure that the plugins will eventually"; \
echo "* be in $(plugindir) -- the easiest way is to make a"; \
echo "* symbolic link from $(plugindir) to $(prefix)/lib/sasl2,"; \
echo "* but this may not be appropriate for your site, so this"; \
echo "* installation procedure won't do it for you."; \
echo "*"; \
echo "* If you don't want to do this for some reason, you can"; \
echo "* set the location where the library will look for plugins"; \
echo "* by setting the environment variable SASL_PATH to the path"; \
echo "* the library should use."; \
echo "********************************************************"; \
fi
Work around that.
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
