Uclibc doesn't have aio.h, which xfsprogs checks for.
However, xfsprogs doesn't use aio.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Replace CXXFLAGS += "-fPIC" with EXTRA_CXXFLAGS to allow native
build and use relative paths to simplify recipe.
Signed-off-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
luajit does not honor standard CC variables
so when its built from shared state it does
not compile because --sysroot is wrong.
This patch fixes the problem by passing
the TOOLCHAIN_OPTONS to appropriate flags
so that it gets the correct sysroot value
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Otherwise the libav executables (avplay, ffmpeg etc.) get dragged
into the image, along with all their dependencies (e.g. SDL).
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Acked-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Fix build with mutlilib enabled architectures
when we have libdir != /usr/lib it always would
not package libsensors.* since they will get
installed into /usr/lib and ignored. So define
LIBDIR properly
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This fixes the compile errors seen when building
tcsh from scratch. Its not seen with image builds
normally since ncurses is already built due to
other image dependencies
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The previous version (4.1.3-10) was unbuildable due to this issue:
WARNING: Failed to fetch URL git://git.debian-maintainers.org/git/daniel/libdvdread.git;protocol=git;branch=debian,
attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository <snip>/downloads//git2/git.debian-maintainers.org.git.daniel.libdvdread.git...
fatal: Unable to look up git.debian-maintainers.org (port 9418) (Name or service not known)
Signed-off-by: Mario Domenech Goulart <mario@ossystems.com.br>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
OE-Core now handles the detection of authentication so we don't need
to do it here. The bbappend file is kept to provide the upgrade path
only, or the revision would go backwards.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
When build on host with older eglibc (Ubuntu 12.04) build fails with:
/tmp/OE/build/tmp-eglibc/sysroots/genericarmv8/usr/include/bits/predefs.h:23:3: error: #error "Never use <bits/predefs.h> directly; include <stdc-predef.h> instead."
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Disable parallel make it does not work all the time
Fix build with kernel-headers from 3.8
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
while testing this patch a hidden configure error was detected [1]
autoreconf: running: gnu-configize
Can't load '/home/andreas/tmp/oe-core-eglibc/sysroots/x86_64-linux/usr/lib/perl-native/perl/5.14.3/auto/Data/Dumper/Dumper.so' for module Data::Dumper: /home/andreas/tmp/oe-core-eglibc/sysroots/x86_64-linux/usr/lib/perl-native/perl/5.14.3/auto/Data/Dumper/Dumper.so: undefined symbol: PL_charclass at /home/andreas/tmp/oe-core-eglibc/sysroots/x86_64-linux/usr/lib/perl-native/perl/5.14.3/XSLoader.pm line 71.
at /home/andreas/tmp/oe-core-eglibc/sysroots/x86_64-linux/usr/lib/perl-native/perl/5.14.3/Data/Dumper.pm line 36
Compilation failed in require at /home/andreas/tmp/oe-core-eglibc/sysroots/x86_64-linux/usr/share/autoconf/Autom4te/C4che.pm line 33.
BEGIN failed--compilation aborted at /home/andreas/tmp/oe-core-eglibc/sysroots/x86_64-linux/usr/share/autoconf/Autom4te/C4che.pm line 33.
Compilation failed in require at /home/andreas/tmp/oe-core-eglibc/sysroots/x86_64-linux/usr/bin/autom4te line 37.
BEGIN failed--compilation aborted at /home/andreas/tmp/oe-core-eglibc/sysroots/x86_64-linux/usr/bin/autom4te line 37.
autoreconf: Leaving directory `.'
but this seems unrelated to geany.
[1] http://lists.linuxtogo.org/pipermail/openembedded-core/2013-March/036745.html
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* Explicitly disable all other languages than python, which was the
only language listed in DEPENDS.
* Inherit pythonnative to make it find OE's python executable.
* Depend on libpcre in order to reliably enable Swig's regex feature.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
*fix bug that can not find CONFIG file
|error: run ./results|./results: line 15: .: CONFIG.p2041rdb: file not found
* update CONFIG file path
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This was removed from oe-core but it's still useful, so add it to meta-oe.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This recipe provides the Qt library and QML plugins for connman.
MJ: exported INSTALL_ROOT to fix build with dash
MJ: dropped AUTOREV
MJ: dropped TAG and replaced with SRCREV for 0.4.0
Signed-off-by: Felipe F. Tonello <ftonello@cercacor.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* FindSWIG.cmake is using swig -swiglib to find swig.swg and set
SWIG_DIR without that patch swig -swiglib reports absolute path
to datadir how it was on builder which created sstate archive,
reusing swig from sstate results in invalid path hardcoded in
swig binary and FindSWIG reporting missing swig
* unfortunately it's not using any config file we could make
relocateble with SSTATE_SCAN_FILES
* LICENSE-UNIVERSITIES change is only formal
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* how was it possible to check LIC_FILES_CHKSUMs before? I know it was
building, now it fails with:
ERROR: Function failed: obexd: LIC_FILES_CHKSUM points to an invalid file:
/OE/shr-core/tmp-eglibc/work/xscalete-oe-linux-gnueabi/obexd/0.48-r0/obexd-0.48/
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This allows for applications to resolv wins without the winbindd and
sambad.
Change-Id: Iaa86154a59e758b37f28796963e6550ed2d30464
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
lmsensors-config provides lmsensors configuration files. The main lmsensors
recipe provides machine-independent parts of lmsensors, while this recipe
allows configuration files to be machine-specific.
The packages consist of:
* lmsensors-config-libsensors: libsensors configuration file
* lmsensors-config-sensord: sensord logging daemon configuration files
* lmsensors-config-fancontrol: fancontrol script configuration file
Signed-off-by: Thomas Fitzsimmons <fitzsim@cisco.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Nothing in oe-core uses this anymore, but claws-mail in meta-oe does.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Add patch to avoid running AC_RUN_IFELSE code while configuring package.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Add patch to avoid running AC_RUN_IFELSE code while configuring package.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
-march flag is not in CFLAGS so this will always default to -mcpu=cortex-a8
-mfpu=neon. Obviously wrong for other machines.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
A recipe for Redis 2.6.9, an advanced key-value store.
Needed some patching of Makefiles and deps to get it to work with OE.
OE Specific configuration: This is built to override MALLOC and use
libc's malloc instead of the provided jemalloc or tcmalloc that
weren't building correctly.
Also the default savepoint setting was updated in the default
redis.conf to tune for a small embedded system.
Known Bug: redis-cli eats all the input on a serial port - watch out
when using the serial console with redis-cli.
see https://github.com/antirez/linenoise/issues/38
Tested with Yocto "Danny" / armv7a.
Signed-off-by: Kevin Baker <kevinb@ventureresearch.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
