By defining 'listen-address' in the global dnsmasq.conf file we
prevent other instances of dnsmasq from using the global config as we
will get an error that the address is already in use. Instead we pass
'local-service' when we start the main dnsmasq instance which will
listen on the loopback address as well as any other local
subnets. This will allow the main dnsmasq instance to play nice with
other instances we might start for network-manager, libvirt, lxc...
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
The dnsmasq package installs a ${sysconfigdir}/dnsmasq.d directory but
doesn't currently use any configuration files that might be placed
there. This goes against what the user would expect and doesn't match
what you see in other distros.
We could ensure this config directory is read when dnsmasq is started,
as we are doing here, or by including it in the main dnsmasq.conf
file. By doing it here we can have better reuseability of the main
dnsmasq.conf file by other instances of dnsmasq.
There are currently no files added to the dnsmasq.d directory for core
oe images, so this should not result in any runtime behavior changes.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
curlpp is configured with boost by default. And it searches boost
directory on build machine. If boost is installed on build machine, then
causes qa issue:
| ERROR: curlpp-0.7.3-r0 do_configure: This autoconf log indicates
| errors, it looked at host include and/or library paths while
| determining system capabilities.
Pass the boost directory in ${STAGING_DIR_HOST} to configure script to
disable search on build machine to fix the issue.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
The configure is not generated by autotools, and it's
designed to enable ipv6 by default and have option
--disable-ipv6 to disable it, but no --enable-ipv6,
so remove it.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
1) Upgrade drbd-utils from 8.9.3 to 8.9.6.
2) Delete one patch, since the data has been changed.
0001-Makefile.in-don-t-compile-documentation.patch
3) Modify EXTRA_OECONF, since the documentation file is not suitable for cross-compile, so we do not compile it.
Signed-off-by: Wang Xin <wangxin2015.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Highlight:
- fix CVE-2016-5180
Other changes, from https://c-ares.haxx.se/changelog.html
c-ares version 1.12.0 - Sep 29 2016
Changes:
api: add ARES_OPT_NOROTATE optmask value
Bug fixes:
CVE-2016-5180: ares_create_query single byte out of buffer write
configure: acknowledge --disable-tests [1]
man pages: fix typos detected by Lintian
test: add missing #includes for dns-proto.cc
test: avoid in6addr_* constants
test: Build with MinGW on AppVeyor
Makefile.m32: add support for extra flags
Makefile.m32: add support for CROSSPREFIX
configure: check if tests can get built before enabled
ares_library_cleanup: reset ares_realloc too
ahost.c: add cast to fix C++ compile
test: Only pass unused args to GoogleTest
build: commonize MSVC version detection
msvc_ver.inc: support Visual Studio 2015 Update 1, 2, 3
test: for AF_UNSPEC, return CNAME only for AAAA, but valid A record
ares_getnameinfo: explicitly clear struct servent before use
test: Update fuzzing function prototype
init: fix nsort initialization
test: add fuzzing check script to tests
web: http => https
read_tcp_data: remove superfluous NULL check
LICENSE.md: add a stand-alone license file
SECURITY.md: suggested "security process" for the project
ares_init_options: only propagate init failures from options [2]
headers: remove checks for and defines of variable sizes
test: fix gMock to work with gcc >= 6.x [3]
fix metadata:
We should set SUMMARY instead of DESCRIPTION.
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
With linux kernel v4.8, for file ./src/maint/zntune.c, glibc time.h is
included before linux time.h, when compile zntune.c, it break down by
the following errors:
redefinition of 'struct timespec' 'struct timeval'
'struct timezone' 'struct itimerval'
We should exclude the linux time.h by disable linux/atm_zatm.h and move
some useful definition in linux/atm_zatm.h to a new header file in linux-atm
source code to resolve it.
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
A nice tool to directly read, write and interpret ethernet PHY data.
Very useful when debugging PHY or MDIO problems, which ethtool does
not do.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* Upgrade geoip-perl from 1.45 to 1.50
* Update LIC_FILES_CHKSUM to check LICENSE file instead
of the previous README as no README file in 1.50
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Solve the potential issue for previous commit
<arptables: add arptables systemd service file>: in a small build where
/etc/sysconfig directory doesn't exist, the action of adding default
configuration file (/etc/sysconfig/arptables) will fail.
Signed-off-by: Li Zhou <li.zhou@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Add arptables systemd service file.
If there isn't any configuration file (/etc/sysconfig/arptables),
add a default configuration file.
Signed-off-by: Li Zhou <li.zhou@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* Add configure option and PACKAGECONFIG for
the following packages:
- acl
- attr
- libaio
- libbsd
- libcap
- valgrind
* They are all optional, so disable by default
or control them based on DISTRO_FEATURES.
* Remove the direct dependency on libaio
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* Add configure option and PACKAGECONFIG for
the following packages:
- acl
- attr
- libaio
- libbsd
- libcap
- valgrind
* They are all optional, so disable by default
or control them based on DISTRO_FEATURES.
* Remove the direct dependency on libaio and libbsd
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* Add configure option and PACKAGECONFIG for
the following packages:
- acl
- attr
- libaio
- libbsd
- libcap
- valgrind
* They are all optional, so disable by default
or control them based on DISTRO_FEATURES.
* Remove the direct dependency on libaio and libbsd
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* Add configure option and PACKAGECONFIG for
the following packages:
- acl
- attr
- libaio
- libbsd
- libcap
- valgrind
* They are all optional, so disable by default
or control them based on DISTRO_FEATURES.
* Remove the direct dependency on libaio and libbsd
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* fixes autodetected dependencies
http://logs.nslu2-linux.org/buildlogs/oe/world/log.report.20160905_011801.log
chrony-2.4: chronyc rdepends on nss, but it isn't a build dependency, missing nss in DEPENDS or PACKAGECONFIG? [build-deps]
chrony-2.4: chrony rdepends on libcap, but it isn't a build dependency, missing libcap in DEPENDS or PACKAGECONFIG? [build-deps]
chrony-2.4: chrony rdepends on nss, but it isn't a build dependency, missing nss in DEPENDS or PACKAGECONFIG? [build-deps]
* also use PACKAGECONFIG_CONFARGS instead of EXTRA_OECONF in do_configure
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* Upgrade tcpreplay from 3.4.4 to 4.1.1
* Update the LICENSE file checksum as the LICENSE
updated to implement GPLv3 license
* Remove the backport and unapplicable patches
- tcpreplay-3.4.4-cross-compile.patch
- tcpreplay-3.4.4-no-bfp-support.patch
- tcpreplay-3.4.4-fix-unable-to-link-libpcap-issue.patch
- tcpreplay-3.4.4-improve-search-for-libpcap.patch are
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
1) Upgrade openvpn from 2.3.8 to 2.3.9.
2) Modify EXTRA_OECONF, Since the Changelog in the new version shows:
Remove --enable-password-save option
Reflect enable-password-save change in documentation
Also remove second instance of enable-password-save in the man page
3) Fix the Warning:
WARNING: openvpn-2.3.9-r0 do_configure: QA Issue: openvpn: configure was passed unrecognised options: --enable-password-save [unknown-configure-option]
Signed-off-by: Wang Xin <wangxin2015.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
The current version of ifenslave is 2.6_1.1.0 actually, then update to
2.7 and change the version to 2.7 too.
* update to SRC_URI to the debian git repo
* the license is changed from GPLv2 to GPLv3
* the program is rewrote with shell script
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
