Changes:
- add PACKAGECONFIG "xft" enables XFontConfig features
- add PACKAGECONFIG "xss" enables XScreenSaver extension
- use ${BPN} and ${PV}
- use ${VER} intermediate variable for readability
- fulfill LIC_FILES_CHKSUM
- remove BINCONFIG_GLOB: inherit binconfig is not present, lib/tkConfig.sh paths are valid
- add SSTATE_SCAN_FILES, like it is done in tcl recipe (OE-Core)
Note: tcl and tk are sharing the same licence, tcl licence file in commited in OE-Core.
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This updates to last stable release and, as a plus, fix an out of tree
build failure.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* when there is no gtk+ in sysroot, configure fails to find it
but doesn't cause do_configure task to fail :/
configure: WARNING: using cross tools not prefixed with host triplet
checking pkg-config is at least version 0.9.0... yes
checking for GTK... no
* builds fails a bit later with confusing do_install error:
ERROR: Function failed: do_install (log file is located at /OE/build/oe-core/tmp-eglibc/work/i586-oe-linux/gtkperf/0.40-r0/temp/log.do_install.31526)
ERROR: Logfile of failure stored in: /OE/build/oe-core/tmp-eglibc/work/i586-oe-linux/gtkperf/0.40-r0/temp/log.do_install.31526
Log data follows:
| DEBUG: SITE files ['endian-little', 'bit-32', 'ix86-common', 'common-linux', 'common-glibc', 'i586-linux', 'common']
| DEBUG: Executing shell function do_install
| NOTE: make -j 9 DESTDIR=/OE/build/oe-core/tmp-eglibc/work/i586-oe-linux/gtkperf/0.40-r0/image install
| make: *** No rule to make target 'install'. Stop.
| ERROR: oe_runmake failed
| WARNING: /OE/build/oe-core/tmp-eglibc/work/i586-oe-linux/gtkperf/0.40-r0/temp/run.do_install.31526:1 exit 1 from
| exit 1
| ERROR: Function failed: do_install (log file is located at /OE/build/oe-core/tmp-eglibc/work/i586-oe-linux/gtkperf/0.40-r0/temp/log.do_install.31526)
NOTE: recipe gtkperf-0.40-r0: task do_install: Failed
ERROR: Task 2 (/OE/build/oe-core/meta-openembedded/meta-oe/recipes-graphics/gtkperf/gtkperf_0.40.bb, do_install) failed with exit code '1'
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This fixes the Makefile so the client.txt file is copied from the
original source tree. This fixes the out of tree build error.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* otherwise fails in do_compile with:
| mimremotewindow.cpp:27:39: fatal error: X11/extensions/Xcomposite.h: No such file or directory
| #include <X11/extensions/Xcomposite.h>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This commit also modifies SRC_URI to fetch a release tarfile instead
of checking out from SourceForge SVN and makes some minor updates to
the jpeg-tools DESCRIPTION text.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* Update recipe:
- update SRCREV to latest release, 2.18
- switch back to master branch
- increase verbosity (pass V=1 to EXTRA_OEMAKE) to make debugging easier
* Drop patches:
- fix-lib64-can-not-be-shiped-in-64bit-target.patch
replaced by LIBARGS definition. the build system allows to override libdir
using LIB32 and LIB64 variables
- 0001-install-perl-lib-to-directory-perl-instead-of-perl5.patch
replaced by a one-liner to fixup perl module directory hardcoded to perl5
* Refresh skip-checking-LIB32-and-LIB64-if-they-point-to-the-s.patch
- only disable the error to skip the check
* Add patches:
- 0001-aarch64-fix-cross-compilation.patch - submitted upstream
allow to override CC and use it for aarch64 case like the other arch
- 0001-aarch64-fix-page-size-not-properly-computed.patch - submitted upstream
fix typo on MB variable (MB -> $MB) and add the missing linker variants
(aarch64elfb, aarch64linux, aarch64linuxb)
- 0001-replace-lib-lib64-hardcoded-values-by-LIBDIR32-LIBDI.patch
submitted upstream. replace lib/lib64 hardcoded values by LIBDIR32 and
LIBDIR64 variables
* Remove patches that aren't applied in the recipe (they're all merged
upstream and available in 2.18 release):
- libhugetlbfs/files/aarch64-support.patch
- aarch64-unit-test-fixes.patch
- add-PROT-NONE-to-the-mprotest-test.patch
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This new version of Gate One uses a new configuration file format which
means the old server.conf is gone. It now stores configuration files in
/etc/gateone/conf.d. The /opt/gateone directory is also gone and
instead the package installs like a regular Python module in
site-packages. SSL certificates/keys are stored in /etc/gateone/ssl/.
The new version requires python-tornado 3.1.1 (which was submitted
earlier today) and the python-futures package (which was also submitted
today).
An 80oe.conf file has been added specific to OpenEmbedded that replaces
the old pre-configured server.conf functionality.
The old patch that removes the init script checks has been deprecated by
the use of the --skip_init_scripts option which is now being passed to
setup.py.
Lastly, Gate One 1.2 is about twice as fast (benchmarked) as Gate One
1.1 on the Beaglebone platform.
Signed-off-by: Dan McDougall <daniel.mcdougall@liftoffsoftware.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This commit also adds a new package (lmsensors-sensorsconfconvert-doc)
for the sensors-conf-convert script man page which was added in 3.3.5.
Signed-off-by: Marc Ferland <ferlandm@sonatest.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Also remove hack that deletes headers from staging, it's not needed anymore.
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This package will not build with a separate build directory.
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
License is changed since readlink is dropped
from package which was sole package licensed under BSD
Additionally fix B != S build too
Below is the diff of license change
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
1. default enable perl and python bindings
2. rrdtool uses perl.real, perl.real doesn't know where the PERL5LIB should be
when prebuilts are used. Use the wrapper perl instead, perl sets PERL5LIB and
invokes perl.real
3. While using dash as /bin/sh, subsequent commands in functions will not use
the environment variables passed to the function call line unless explicitly
run "export ENV_VAR".
4. delete unrecognized options: "--enable-local-libpng" and "--enable-local-zlib"
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
to avoid the folloing warnings:
log.world.20140418_190059.log/bitbake.log:WARNING: gegl-0.2.0 was registered as shlib provider for load.so, changing it to collectd-5.2.2 because it was built later
log.world.20140418_190059.log/bitbake.log:WARNING:
libgphoto2-camlibs-2.4.11 was registered as shlib provider for disk.so, changing it to collectd-5.2.2 because it was built later
log.world.20140418_190059.log/bitbake.log:WARNING: gegl-0.2.0 was registered as shlib provider for threshold.so, changing it to
collectd-5.2.2 because it was built later
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Adding a recipe for the X Window Dump tool, a lightweight tool that is
useful for taking screenshots on embedded targets.
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Update to latest and at the same time fix
building when S != B
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
- upgrade to version 303
- set B=S due to broken build/source seperation
- tweak licence file md5 to account for date change
Signed-off-by: Jack Mitchell <jmitchell@cbnl.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Out-of-tree builds don't seem to work for vim, probably as it doesn't use
automake.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Add ImageMagick to known licenses
The license checksum is changed due to year change in license text
-Copyright 1999-2013 ImageMagick Studio LLC, a non-profit organization dedicated to making software imaging solutions freely available.
+Copyright 1999-2014 ImageMagick Studio LLC, a non-profit organization dedicated to making software imaging solutions freely available.
Add suffix .im6 to binaries, this avoids conflicts with other packages
e.g. lmbench provides stream utility and imagemagick does too so when
both packages are being part of image we have conflicts. This resolves
it by renaming stream to stream.im6 to make it distinct
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The old license file, COPYING has been renamed to LICENSE. It has also been
appended with the the disclaimer from src/common/convert_UTF.h (see r1285).
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Previously this was only set in CFLAGS.
An build issue was discovered while convering in internal application
from Qt4 to Qt5. As a result of this, the required header files were
no longer found, until we also set CXXFLAGS.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
1. Enable pam, openssl, python, uuid, libxml, tcl, nls, libxml and perl bindings.
2. Make plperl, plpython, pltcl subpackages as dynamic in case other packages runtime
depend on them.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
1. Split out libecpg-compat-dev, libecpg-staticdev, libecpg-doc, libpq-staticdev,
libpgtypes-staticdev and libpgtypes-dev into seperate packages.
2. Multilib builds set the package name (PN) to both foo and lib32-foo breaking
build.use BPN instead to get the Base package name.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
1. Add DESCRIPTION
2. Add init script for starting up the PostgreSQL server.
3. Disable krb5 by default
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
As most linux distribution do, gd only includes the library,
and split all the command line tools into gd-tools, and add
the perl dependcy since one of the tools is a perl script.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
