1) Upgrade xrdp from 0.9.4 to 0.9.11.
2) Remove patch that is included in 0.9.11.
0001-Fix-of-CVE-2017-16927.patch
3) Remove patch that is not suitable for 0.9.11.
0001-Fix-sesman.ini-and-xrdp.ini.patch
Signed-off-by: Zheng Ruoqin <zhengrq.fnst@cn.fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
License checksum changed because the section that was not part of the
license was removed (see @d0e81c8e0fb9676602db14a4120235f1524b1306).
Signed-off-by: Oleksandr Kravchuk <open.source@oleksandr-kravchuk.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Backport a patch from upstream master that corrects the passing of
link flags through configure.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Spice is only compatible with x86 architectures, its dependency triggers
a build error on other archs since the build system isnt able to find a
provider for it.
Fix dependencies to only include spice when an x86 architecture is being
built, and configure the package accordingly.
Signed-off-by: Alejandro Hernandez <aehs29@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Remmina has become one of the most widely used RDP clients,
it uses freeRDP 2.0 as a backend and also supports multiple
network protocols like RSP, VNC, SPICE, NX, and SSH.
Link with libexecinfo explicitly on musl
limit to x86/x86_64 alone since spice is limited to these architectures
Signed-off-by: Alejandro Enedino Hernandez Samaniego <aehs29@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Remove patch: 0001-fix-NULL-pointer-problem.patch
since this is included in 2.0.13
Signed-off-by: Yuan Chao <yuanc.fnst@cn.fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Run blkdeactivate failed:
...
root@intel-x86-64:~# /usr/sbin/blkdeactivate
Deactivating block devices:
/usr/sbin/blkdeactivate: line 345: /bin/lsblk: No such file or directory
/usr/sbin/blkdeactivate: line 345: /bin/sort: No such file or directory
/usr/sbin/blkdeactivate: line 345: /bin/lsblk: No such file or directory
/usr/sbin/blkdeactivate: line 384: SKIP_DEVICE_LIST: bad array subscript
...
- Add missing runtime depends
- Set location of the commands
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Fix out of tree builds
Fix build with clang as well as musl
Refresh and forward port patches as needed
Update boost headers
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Using COMMON_LICENSE_DIR in LIC_FILES_CHKSUM of downloaded
code is never the right thing to do, there must be some
license information and that has to be checked instead.
In several cases the claimed LICENSE was also incorrect.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
deploy.bbclass requires do_deploy to copy files to DEPLOYDIR (sstate
input dir) instead of DEPLOY_DIR_TOOLS (sstate output dir), otherwise
the sstate caching does not work.
Signed-off-by: Daniel Klauer <daniel.klauer@gin.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
this recipe inherits python3native class conditionally, this condition
depends on a given packageconfig, however inherit ${VAR} syntax requires
VAR to be evaluated before inheriting it, therefore if someone appends
python3 to packageconfig via a bbappend, then the packageconfig will
become effective and add --enable-bindings-python to configure but
inherit wont evaluate correctly since the expression adding to
packageconfig
PACKAGECONFIG_append = " python3"
will be coming _after_ the inherit, and the builds will fail e.g.
| ../../../libgpiod-1.3/bindings/python/gpiodmodule.c:8:10: fatal error: Python.h: No such file or directory
| #include <Python.h>
This will still mean that python3native is always inherited but the
effective configure option will be --disable-bindings-python and that
will do the right thing
See. https://github.com/openembedded/meta-openembedded/issues/140
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This is not a security tool, it is a support library that
is needed for vgauth in open-vm-tools and can also be used
by libreoffice.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Since commit [libdevmapper/lvm2: force recipe libdevmapper to populate
sysroot only] applied, if recipe DEPENDS on libdevmapper, we have to
add lvm2 to DEPENDS
Remove duplicated bash from RDEPENDS
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Previously, in order to fix circular dependencies, we split
libdm from lvm2 as a new recipe libdevmapper, and as running result
proved, we need to keep both of them built with the same configuration
option
With new configuration options added, it is hard to keep them the same,
so we make recipe libdevmapper to populate libdevmapper sysroot only,
and make lvm2 to provide package libdevmapper.
In this situation, option differ does not affect header and library API
between lvm2 and libdevmapper, although lvm2 and libdevmapper are different
at build time, but there is only one lvm2 at run time
Side effect:
- If one recipe DEPENDS on libdevmapper, it has to add libdevmapper to
its RDEPENDS or add lvm2 to DEPENDS, otherwise, there will be a
[file-rdeps] or [build-deps] QA warning
- It has to add `PREFERRED_RPROVIDER_libdevmapper = "lvm2"' to local.conf
to workaound 'Multiple providers' NOTE
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The package does use autotools based build systemd but it comes with a
bit of a twist. It explicitly disallows running autoheader on the source
tree. This can apparently be easilt accomplished with exclude parameter
passed via EXTRA_AUTORECONF.
This patch also adds PACKAGECONFIG option allowing the user to toggle
threading support in the library. Not sure how useful it is, but upstream
does offer such option, it works, and its not a lot of work to expose it
via PACKAGECONFIG.
Another improvement is related to package optimization handling.
mxml has a nasty habit of disregarding optimization flags passed by the
user. It always appends -Os -g to CFLAGS in its configure script. Its
a bit suprising to find out DEBUG_BUILD=1 in local.conf has no impact on
libraries produced by mxml recipe. This can be fixed with a simple sed
script.
Sed is also used to enable verbose compilation output. Having full
compiler invocations visible in the logs is generally useful, but
more importantly it allows some of the QA checks to their work.
While doing this cleanup I've also renamed the recipe from libxml_git.bb
to libxml_3.0.bb. The git keyword suggests this recipe is for some
random git snapshot, while in reality its for latest stable upstream
release of the package.
Last but not least this patch removes the bin package. Current versions of
mxml no longer provide any tools. The package was empty.
Signed-off-by: Piotr Tworek <tworaz@tworaz.net>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
While systemd enable cryptsetup (PACKAGECONFIG_append_pn-systemd = ' cryptsetup'),
there is a circular dependencies:
systemd -> systemd -> cryptsetup -> libdevmapper -> udev (PREFERRED_PROVIDER_udev = systemd)
The libdevmapper was used to break circular dependencies,
it does not require udev, refer commit [698d512 lvm2: Add a
PACKAGECONFIG for udev support] to move udev related from
lvm2.inc to lvm2.bb
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
ADE Framework is a graph construction, manipulation, and processing
framework. ADE Framework is suitable for organizing data flow
processing and execution.
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
clinfo is a simple command-line application that enumerates all possible
(known) properties of the OpenCL platform and devices available on the
system.
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
It was no longer building and will be removed in the next
upstream version.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
cli11 is header-only and the main package is empty. Remove the
dependency to cli11 from cli11-dev so cli11-dev can be included in an
SDK via IMAGE_INSTALL, RDEPENDS, and the like.
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Commit c6e963f9e ("lvm2: Add RDEPEND on lvm2 to lvm2-udevrules") added
a package dependency due to lvm2-udevrules needs dmsetup, however
dmsetup was moved to libdevmapper in commit 269d009a81 ("lvm2:
libdevicemapper package needs udev rules and dmsetup"), so this
dependency should be only for libdevmapper instead of the full package.
With the current implementation, a package that has a dependency with
lvm2-udev rules will include also many unnecessary packages like lvm2,
lvm2-scripts, etc. and their dependencies.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
