* and Applying patch waf-as-source.patch
...
File buildtools/bin/waf-svn is not empty after patch; not deleting
...
Patch waf-as-source.patch does not apply (enforce with -f)
I've dropped this chunk and now it builds
* there is also WARNING about unpackaged but empty base_sbindir
WARNING: QA Issue: samba: Files/directories were installed but not
shipped
/sbin
created by do_install in samba.inc but used only when cifs is built,
maybe we should remove it from samba.inc now
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* There are difference spaces between inetutils-1.8/COPYING
and inetutils-1.9.1/COPYING,so md5sum is changed.
* the following patches are accepted by inetutils 1.9.1 upstream
inetutils-1.8-1005-ftpd-add-daemon-D-nommu-support.patch
inetutils-1.8-1004-detect-fork-support.patch
inetutils-1.8-1003-use-daemon-from-the-C-library-when-possible.patch
inetutils-1.8-1002-rshd-detect-__rcmd_errstr-support-in-the-C-lib.patch
inetutils-1.8-1001-ftp-rename-ruserpass-to-avoid-C-library-collision.patch
inetutils-1.8-0002-argp-fix-program_invocation_name-detection.patch
Signed-off-by: Chunrong Guo <b40290@freescale.com>
If the native recipe has the RDEPENDS in, the build fails because these
packages are not provided by python-native.
Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
- provide default configuration files for both gammu and
gammu-smsd
- enable MySQL support
- enable libdbi support
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
* Update opencv and opencv-samples to 2.4.3
* Use tar instead of no longer available SVN repository
* Remove numpy detection patch and update related CMAKE variable
* Fix QA Issues: contains probably-redundant RPATH
* Add PACKAGES_DYNAMIC for split library packages
Signed-off-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
The compilation routine for the kernel has an explicit call to
build version.h, which works fine for most kernels, but the
location of it has recently changes.
commit d183e6f5 [UAPI: Move linux/version.h]
commit 10b63956 [UAPI: Plumb the UAPI Kbuilds into the user
header installation and checking]
moves the file to include/generated/linux/version.h and then to
include/generated/uapi/linux/version.h.
As a result kernel builds of 3.7 or bisection builds of intermediate
kernel commits will fail with:
make[2]: *** No rule to make target `include/linux/version.h'. Stop.
Making the explicit version.h build conditional on the version, or
via a file test would fix the problem, but it introduces some complexity
to the build.
Even without an explicit call to build version.h, it is always produced
by the kernel build, so it can simply be removed.
This extra make line was originally so that the kernel version could be
determined, so that then different instructions could be executed depending
on whether it was a 2.4 or 2.6 kernel. Since we no longer support 2.4, this
code is no longer needed.
[YOCTO: #3293]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
else host python is used leading to the following error if the host doesn't
have the python headers installed :
| Python headers are required to build Mercurial
| make: *** [build] Error 1
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
replace oe_run and oe.process with bb.process
gitver got broken by following oe-core commits:
15ad62ab1be060d8a7cdc2d28167ea3af4cfd5d5
d56062cbf92ef206bf06c767befacb66927a9a36
Signed-off-by: Radek Dostal <rd@radekdostal.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
This changes the build system from autotools for cmake so we change
the options to allow it to proper build.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
* Update to 0.4.4, adjusting python module dependencies as appropriate
* Add SUMMARY and DESCRIPTION
* Add LIC_FILES_CHKSUM
* Make LICENSE more accurate
* Fix unpackaged directory warning
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* Update to 1.16
* Add LIC_FILES_CHKSUM
* Add SUMMARY and extend DESCRIPTION
* Drop PRIORITY
* Drop AUTHOR (generally we don't include this)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Used sed expression given here:
http://lists.linuxtogo.org/pipermail/openembedded-core/2011-November/012373.html
Plus an additional expression for .expand. Full expression is:
sed \
-e 's:bb.data.\(setVar([^,]*,[^,]*\), \([^ )]*\) *):\2.\1):g' \
-e 's:bb.data.\(setVarFlag([^,]*,[^,]*,[^,]*\), \([^) ]*\) *):\2.\1):g' \
-e 's:bb.data.\(getVar([^,]*\), \([^, ]*\) *,\([^)]*\)):\2.\1,\3):g' \
-e 's:bb.data.\(getVarFlag([^,]*,[^,]*\), \([^, ]*\) *,\([^)]*\)):\2.\1,\3):g' \
-e 's:bb.data.\(getVarFlag([^,]*,[^,]*\), \([^) ]*\) *):\2.\1):g' \
-e 's:bb.data.\(getVar([^,]*\), \([^) ]*\) *):\2.\1):g' \
-e 's:bb.data.\(expand([^,]*\), \([^ )]*\) *):\2.\1):g' \
-i `grep -ril bb.data *`
Some minor correction in systemd.bbclass was needed for some expressions
that didn't quite match the regex in the desired way; additionally a few
instances were manually changed.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
hddtemp is unmaintained upstream so we have to do a bit of patching. All
patches sourced from Debian/Fedora, except hddtemp-no-nls-support.patch
which came from OE-Classic.
Other improvements:
* Add initscript from Debian
* Make LICENSE more accurate
* Add LIC_FILES_CHKSUM
* inherit gettext to avoid error during configure
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
This introduces a recipe to build hplip 3.12.6 in a simple configuration
aimed at USB printers. It is based on a 3.11.3a recipe for oe classic
by Steve Sakoman.
The hp-setup program is patched to add a small delay after restarting cups,
as on slower embedded systems the cups daemon would sometimes not restart
quickly enough and adding a new printer would sporadically fail.
Tested on an armv6 system (with cups 1.4.6, ghostscript 9.05, foomatic).
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Path replacement was not happening on some machines if the MySQL build
scripts set a different path in the produced mysql_config script,
resulting in host paths being left in.
Original patch by Joe Slater <jslater@windriver.com>.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
autoconf.bbclass forces building po dirs by copying po/Makefile.in.in. We have
to care for libgphoto2_port/po/Makefile.in.in too and have to remove
AM_PO_SUBDIRS() from configure.ac since that causes
| autoreconf: running: aclocal --system-acdir=/home/Superandy/tmp/oe-core-eglibc/work/armv7a-vfp-neon-angstrom-linux-gnueabi/libgphoto2-2.4.11-r2/libgphoto2-2.4.11/aclocal-copy/ --automake-acdir=/home/Superandy/tmp/oe-core-eglibc/sysroots/x86_64-linux/usr/share/aclocal-1.12 -I /home/Superandy/tmp/oe-core-eglibc/work/armv7a-vfp-neon-angstrom-linux-gnueabi/libgphoto2-2.4.11-r2/libgphoto2-2.4.11/auto-m4/ -I /home/Superandy/tmp/oe-core-eglibc/work/armv7a-vfp-neon-angstrom-linux-gnueabi/libgphoto2-2.4.11-r2/libgphoto2-2.4.11/m4m/ -I /home/Superandy/tmp/oe-core-eglibc/work/armv7a-vfp-neon-angstrom-linux-gnueabi/libgphoto2-2.4.11-r2/libgphoto2-2.4.11/auto-m4/ -I /home/Superandy/tmp/oe-core-eglibc/work/armv7a-vfp-neon-angstrom-linux-gnueabi/libgphoto2-2.4.11-r2/libgphoto2-2.4.11/m4m/ --force -I auto-m4 -I m4m
| configure.ac:230: error: `po-directories' is already registered with AC_CONFIG_COMMANDS.
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
The lmsensors project provides hardware health monitoring tools in the
form of kernel drivers, a user-space library and some helper
programs. This recipe provides all the different user-space tools
offered by lmsensors in separete packages. Startup scripts and default
configuration files are also made available through this commit.
The packages consist of (description text from lmsensors documentation):
* lmsensors-libsensors: The user-space sensors support library code.
* lmsensors-sensors: A console tool to report sensor readings and set
new sensor limits.
* lmsensors-sensord: A daemon to watch sensor values and log
problems. It includes RRD support.
* lmsensors-fancontrol: Controls fanspeeds responding to changes on
temperature sensors. Configuration through pwmconfig.
* lmsensors-sensorsdetect: This program tries to detect the available
SMBus adapters and the chips connected to them, as well as Super-I/O
and misc chips.
* lmsensors-sensorsconfconvert: Convert configuration files from
lmsensorsv2 to lmsensorsv3.
* lmsensors-pwmconfig: tests the pwm (pulse width modulation) outputs
of sensors for their effect on the fans and helps to setup the
configfile for fancontrol.
* lmsensors-isatools: This program sets/gets the registers of ISA or
Super-I/O chips.
Signed-off-by: Marc Ferland <ferlandm@sonatest.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Without that change target system had to be restarted to get MySQL
running or it had to be run by hand. Reason was simple: mysql init
script was starting before S99configure when package was not yet
configured.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
