At this point DTSes differ between d1/wip branch of the kernel
and corresponding branch of u-boot. Mangopi-MQ-Pro dts is missed in
u-boot part which leads to missing devices nodes (bluetooth in
particular). Sync dts and pin patch to mangopi only to not affect Nezha.
Signed-off-by: Pavel Zhukov <pavel@zhukoff.net>
Use SOC name (Allwinner D1) instead of board name for
generic recipes.
Move board specific configuration to corresponding machine conf
Signed-off-by: Pavel Zhukov <pavel@zhukoff.net>
Based on Nezha D1 machine config with addjusterd DTB configuration
and added wifi module driver.
Tested with core-image-(base|weston) on MangoPi MQ Pro rev 1.3:
- HDMI output/weston and wifi are working. USB-C ethernet detected but not
tested due to lack of HW.
Signed-off-by: Pavel Zhukov <pavel@zhukoff.net>
We don't need to specify OpenSBI in EXTRA_IMAGEDEPENDS to ensure it's
built and if we specify it we get circular dependencies with the u-boot
RSA signing code, so let's drop it.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This is largely based on the beaglev code nbut tweaked to work with current
starfive kernel repositories and tweak to the board.
The kernel and rootfs boot with working network and graphics. The u-boot
binary builds but is as yet untested.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add baremetal-riscv32nf config for RISC-V32 machines without
floating point instructions (e.g. Hi3861)
Signed-off-by: Bernhard Rosenkränzer <bernhard.rosenkraenzer.ext@huawei.com>
As we are in rapid dev phase, lets all use dev kernel
since older branches while work do not have all the latest
porting work
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This makes the main recipe PN same as the one in core, but gives it
starfive flavor in PV, this then becomes nice to include it via
PREFERRED_VERSION mechanism.
Additionally, this also means that it gets picked up in world builds for
beaglev and OE-Core recipe is not preferred, as of now, it tries to
build both, since they are seen as different packages by bitbake due to
different PN
Signed-off-by: Khem Raj <raj.khem@gmail.com>
do_deploy need to execute from sstate-cache when the build directory is
empty and system determines that there is no change to u-boot and it
can be reused from sstate, in this scenario deploydir needs to populate
properly, so we can not use WORKDIR in logic
Activate u-boot and opensbi only for beaglev-starlight-jh7100
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Fixes
NOTE: Multiple providers are available for virtual/bootloader (u-boot, u-boot-juno, u-boot-orangepi-i96, u-boot-poplar, u-boot-socfpga)
Consider defining a PREFERRED_PROVIDER entry to match virtual/bootloader
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Latest glibc wants kernel 5.4+ ABI and linux-yocto is still at 5.2, so
until that switches to 5.4 lets pin to dev kernel which is 5.5+
Fixes#199
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Now that we are using U-Boot 2019.10 let's remove the uneeded patches
that have been merged into mainline u-boot.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Now that we are using QEMU 4.1 we can use QEMU's -bios option and
-kernel option and remove the device loader.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Let's swap to using a fitImage by default. At the same time let's update
the u-boot boot commands to handle all the image types and support
loading a uEnv.txt file.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Append causes IMAGE_FSTYPES to contaminate initramfs-based images, as
even when forcing it to be empty at the recipe level, it always shows up
after parsing.
Using += allows the recipe to set another value without being influenced
by the machine configuration.
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Based on the default u-boot machine configuration, useful for fitImage
support (known address for loading the device-tree).
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Update the u-boot boot script to try a TFTP load first and if that fails
fall back to an MMC load.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Linux kernel 5.2 does not work with the device tree included in the
HiFive Unleashed firmware. To allow the kernel to boot let's build the
kernel's device tree into OpenSBI by default.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
