975227ea84
Update the version to Linux 6.0. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
1.9 KiB
Andes AE350 AX45MP Platform
AE350 is an AXI/AHB-based platform with level-one memories, interrupt controller, debug module, AXI and AHB Bus Matrix Controller, AXI-to-AHB Bridge and a collection of fundamental AHB/APB bus IP components pre-integrated together as a system design.
The ae350-ax45mp machine configuration helps developers build
a disk image based on mainline Linux kernel 6.0 with MMC, DMA,
Ethernet, WDT and RTC drivers support, hosted on Andestech Github.
How to build
$ SHELL=/bin/bash kas-container build ./meta-riscv/ae350-ax45mp.yml
The kas-container script can be obtained from
kas repository.
Build results
- core-image-minimal-ae350-ax45mp.wic.gz
- fitImage
- ae350_ax45mp.dtb
- boot.scr.uimg
- uEnv.txt
- u-boot-spl.bin
- u-boot.itb
Flashing SD card
gunzip -c core-image-minimal-ae350-ax45mp.wic.gz | sudo dd of=/dev/sdX bs=4M iflag=fullblock oflag=direct conv=fsync status=progress && sync
(Optional.) Flashing U-boot SPL
If you need to update the SPL, the first partition holds XIP mode SPL
(u-boot-spl.bin) that can be burned on flash by using the sf command
shown below in U-boot prompt or SPI_Burn tool.
RISC-V # fatload mmc 0:1 0x600000 u-boot-spl.bin
RISC-V # sf probe 0:0 50000000 0
RISC-V # sf erase 0x0 0x10000
RISC-V # sf write 0x600000 0x0 0x10000
Connect to the UART console and reset the board, it should boot from MMC and loads fw_dynamic.bin and u-boot.bin from u-boot.itb located at first partition.