correct download link

Signed-off-by: Michel-FK <michel.stempin@funkey-project.com>

docs/tutorials/hardware/change_sd_card.md

@@ -13,14 +13,14 @@ Get the latest "***FunKey-rootfs-x.y.z.img***" SD card image file
 directly from [here][1] or from the bottom of the latest release page
 in the "assets" section:
 
-https://github.com/FunKey-Project/FunKey-OS/releases/latest{target=_blank}
+[https://github.com/FunKey-Project/FunKey-OS/releases/latest][2]{target=_blank}
 
 ![Github Release](/assets/images/github_sd_card_image.png){.lightbox}
 
 ## Flash the micro-SD card with balenaEtcher
 
 - Download and install balenaEtcher for Windows/Mac OS/Linux from
-  [balena.io][2]{:target="blank"}
+  [balena.io][3]{:target="blank"}
 
 - Run balenaEtcher and click on "Flash from file" to select the
   FunKey-OS image file
@@ -94,7 +94,7 @@ board until you have access to the SD card.
 
 You can now remove the old micro-SD card from its socket and insert
 the new one (previously flashed as described [in the 1st part of this
-tutorial][3]).
+tutorial][4]).
 
 !!! note
     You may need to use some tweezers and pull with some strength in
@@ -115,8 +115,9 @@ Reassemble the console by following the previous steps in reverse order.
     putting back the L/R plastic buttons.
 
 [1]: https://github.com/FunKey-Project/FunKey-OS/releases/download/FunKey-OS-2.0.0/FunKey-sdcard-2.0.0.img
-[2]: https://www.balena.io/etcher/
-[3]: #flashing-a-new-micro-sd-card
+[2]: https://github.com/FunKey-Project/FunKey-OS/releases/latest
+[3]: https://www.balena.io/etcher/
+[4]: #flashing-a-new-micro-sd-card
 
 --8<--
 includes/glossary.md