mirror of
https://github.com/FunKey-Project/FunKey-Project.github.io.git
synced 2025-12-13 10:48:50 +01:00
32 lines
1.5 KiB
Markdown
32 lines
1.5 KiB
Markdown
The FunKey S is a small foldable retro-gaming console.
|
|
|
|
Its electronic parts consist in:
|
|
|
|
- 1x main PCB (0.8 mm thickness) with components on both sides, the maximum component height above PCB on both sides is 1.5 mm. Current revision for this board is Revision E
|
|
- 1x 1.54” IPS LCD TFT screen with SPI interface and using a custom flex cable
|
|
- 1x 420 mAh 402540 LiPo battery
|
|
|
|
|
|
|
|
The FunKey S PCBA Rev. E contains the following main components:
|
|
|
|
- 1x Allwinner V3s SoC with integrated 64MB DDR2 DRAM (LQFP128 package)
|
|
- 1x X-Powers AXP209 companion PMIC chip to provide almost all required power supply rails (QFN48 package)
|
|
- 1x Sylergy SY8088 Buck DC/DC SMPS chip to provide the DRAM power supply rail (SOT23-5 package)
|
|
- 1x NXP PCAL6416 I2C GPIO expander to control all buttons and keypads (except Power Key) (QFN24 package)
|
|
- 1x Diodes Inc. PAM8301 mono audio amplifier (TSOT26 package)
|
|
- 1x 24 MHz main crystal
|
|
- 1x 32.768 kHz RTC crystal
|
|
- 1x Standex-Meder MK24 Reed switch for magnet proximity detection
|
|
- 1x LED for charge indication
|
|
- 1x 8 Ω 0.3 W built-in speaker
|
|
- 1x Micro USB edge-mounted connector
|
|
- 1x Micro SD (TF Card) Push/Push low-profile connector
|
|
- 1x Hirose DF37 0.4 mm pitch miniature LCD connector
|
|
- 1x JST 1 mm pitch battery connector
|
|
- 1x 1.27 mm pitch debug UART header (not mounted)
|
|
|
|
|
|
|
|
|