funkey/FunKey-Project.github.io
1
0
Fork 0
mirror of https://github.com/FunKey-Project/FunKey-Project.github.io.git synced 2025-12-12 18:28:51 +01:00
Code Issues Actions Packages Projects Releases Wiki Activity
FunKey-Project.github.io/docs/tutorials/hardware/change_sd_card.md

3.1 KiB
Raw Blame History

I] Flashing a new SD card

II] Switching SD cards in the FunKey S

On the FunKey S, the SD card was voluntarily placed against the casing so that it has no degree of liberty and cannot move by accident during the eventful life of a keychain. Removing/changing the SD card was nevertheless designed to be pretty straightforward and only require a standard Phillips screwdriver (PH0). Please follow the steps below carefully.

Display Action
removeScrews1{: .lightbox width=240}removeScrews2{: .lightbox width=240}removeScrews3{: .lightbox width=240} **STEP 1 - Removing the screws
Using a standard PH0 screwdriver, remove the 2 screws on the back of your FunKey S.
Be careful to use the correct screwdriver head size not to damage the screws.
removeBack{: .lightbox width=240}removeBack{: .lightbox width=240}removeBack{: .lightbox width=240} STEP 2 - Opening up the console
Carefully remove:
1) The plastic back of the console by pulling from the side of the hinge first.
2) The keychain lanyard and axis.
3) The LR plastic buttons by gently pulling them out of their axis. Be careful not to damage the switch on the circuit board.
removeBattery{: .lightbox width=240}removeBattery{: .lightbox width=240} STEP 3 - Exposing the circuit board
Pull back the battery to expose the circuit board. You can leave it connected to the console.
pullPCB{: .lightbox width=240} STEP 4 - Accessing the SD card
By grabbing it by the micro-USB port, gently pull the circuit board towards you until you have access to the SD card.
removeSD1{: .lightbox width=240}removeSD2{: .lightbox width=240} STEP 5 - Switching SD cards
You can now remove the old SD card from its socket and insert the new one (previously flashed like described in the 1st part of this tutorial).
checkSpeaker1{: .lightbox width=240}checkSpeaker2{: .lightbox width=240} STEP 6 - Reassembly
Before putting back down the circuit board in the case, please make sure the speaker on the circuit board is already inserted in the casing. If not, then insert it first like in the pictures.
Reassemble the console by following the previous steps backwards

--8<-- includes/glossary.md --8<--