godzil/quickdev16
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Switch to new vusb

Browse Source
This commit is contained in:
optixx 2016-02-09 12:30:31 +01:00
parent 08b4654b5c
commit c8d91b4bbf
20 changed files with 339 additions and 295 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

52
avr/usbload/usbdrv/Changelog.txt
View File

@ -275,3 +275,55 @@ Scroll down to the bottom to see the most recent changes.
background of USB ID registration clearer.
* Release 2009-04-15
- Changed CommercialLicense.txt to reflect the new range of PIDs from
Jason Kotzin.
- Removed USBID-License.txt in favor of USB-IDs-for-free.txt and
USB-ID-FAQ.txt
- Fixed a bug in the 12.8 MHz module: End Of Packet decection was made in
the center between bit 0 and 1 of each byte. This is where the data lines
are expected to change and the sampled data may therefore be nonsense.
We therefore check EOP ONLY if bits 0 AND 1 have both been read as 0 on D-.
- Fixed a bitstuffing problem in the 16 MHz module: If bit 6 was stuffed,
the unstuffing code in the receiver routine was 1 cycle too long. If
multiple bytes had the unstuffing in bit 6, the error summed up until the
receiver was out of sync.
- Included option for faster CRC routine.
Thanks to Slawomir Fras (BoskiDialer) for this code!
- Updated bits in Configuration Descriptor's bmAttributes according to
USB 1.1 (in particular bit 7, it is a must-be-set bit now).
* Release 2009-08-22
- Moved first DBG1() after odDebugInit() in all examples.
- Use vector INT0_vect instead of SIG_INTERRUPT0 if defined. This makes
V-USB compatible with the new "p" suffix devices (e.g. ATMega328p).
- USB_CFG_CLOCK_KHZ setting is now required in usbconfig.h (no default any
more).
- New option USB_CFG_DRIVER_FLASH_PAGE allows boot loaders on devices with
more than 64 kB flash.
- Built-in configuration descriptor allows custom definition for second
endpoint now.
* Release 2010-07-15
- Fixed bug in usbDriverSetup() which prevented descriptor sizes above 255
bytes.
- Avoid a compiler warning for unused parameter in usbHandleResetHook() when
compiler option -Wextra is enabled.
- Fixed wrong hex value for some IDs in USB-IDs-for-free.txt.
- Keep a define for USBATTR_BUSPOWER, although the flag does not exist
in USB 1.1 any more. Set it to 0. This is for backward compatibility.
* Release 2012-01-09
- Define a separate (defined) type for usbMsgPtr so that projects using a
tiny memory model can define it to an 8 bit type in usbconfig.h. This
change also saves a couple of bytes when using a scalar 16 bit type.
- Inserted "const" keyword for all PROGMEM declarations because new GCC
requires it.
- Fixed problem with dependence of usbportability.h on usbconfig.h. This
problem occurred with IAR CC only.
- Prepared repository for github.com.
* Release 2012-12-06

25
avr/usbload/usbdrv/CommercialLicense.txt
View File

@ -1,5 +1,5 @@
V-USB Driver Software License Agreement
Version 2009-04-14
Version 2012-07-09
THIS LICENSE AGREEMENT GRANTS YOU CERTAIN RIGHTS IN A SOFTWARE. YOU CAN
ENTER INTO THIS AGREEMENT AND ACQUIRE THE RIGHTS OUTLINED BELOW BY PAYING
@ -32,13 +32,22 @@ product(s), restricted by the limitations in section 3 below.
2.3 Modifications. OBJECTIVE DEVELOPMENT grants you the right to modify
the source code and your copy of V-USB according to your needs.
2.4 USB IDs. OBJECTIVE DEVELOPMENT furnishes you with one or two USB Product
ID(s), sent to you in e-mail. These Product IDs are reserved exclusively for
you. They have been obtained from Wouter van Ooijen (www.voti.nl), who has
reserved the Vendor ID 5824 (decimal) at the USB Implementers Forum, Inc.
(www.usb.org). This mechanism ensures that there are no Product ID conflicts,
but you cannot become USB certified (enter into the USB-IF Trademark License
Agreement) as you would need your own Vendor ID for that.
2.4 USB IDs. OBJECTIVE DEVELOPMENT furnishes you with one or two USB
Product ID(s), sent to you in e-mail. These Product IDs are reserved
exclusively for you. OBJECTIVE DEVELOPMENT has obtained USB Product ID
ranges under the Vendor ID 5824 from Wouter van Ooijen (Van Ooijen
Technische Informatica, www.voti.nl) and under the Vendor ID 8352 from
Jason Kotzin (now flirc.tv, Inc.). Both owners of the Vendor IDs have
obtained these IDs from the USB Implementers Forum, Inc. (www.usb.org).
OBJECTIVE DEVELOPMENT disclaims all liability which might arise from the
assignment of USB IDs.
2.5 USB Certification. Although not part of this agreement, we want to make
it clear that you cannot become USB certified when you use V-USB or a USB
Product ID assigned by OBJECTIVE DEVELOPMENT. AVR microcontrollers don't
meet the electrical specifications required by the USB specification and
the USB Implementers Forum certifies only members who bought a Vendor ID of
their own.
3 LICENSE RESTRICTIONS

38
avr/usbload/usbdrv/Readme.txt
View File

@ -39,8 +39,8 @@ The driver consists of the following files:
with IAR's tools.
License.txt ............ Open Source license for this driver.
CommercialLicense.txt .. Optional commercial license for this driver.
USBID-License.txt ...... Terms and conditions for using particular USB ID
values for particular purposes.
USB-ID-FAQ.txt ......... General infos about USB Product- and Vendor-IDs.
USB-IDs-for-free.txt ... List and terms of use for free shared PIDs.
(*) ... These files should be linked to your project.
@ -49,8 +49,7 @@ CPU CORE CLOCK FREQUENCY
========================
We supply assembler modules for clock frequencies of 12 MHz, 12.8 MHz, 15 MHz,
16 MHz, 16.5 MHz 18 MHz and 20 MHz. Other clock rates are not supported. The
actual clock rate must be configured in usbdrv.h unless you use the default
12 MHz.
actual clock rate must be configured in usbconfig.h.
12 MHz Clock
This is the traditional clock rate of V-USB because it's the lowest clock
@ -105,7 +104,7 @@ can assign PIDs at will.
Since an entry level cost of 1,500 USD is too high for most small companies
and hobbyists, we provide some VID/PID pairs for free. See the file
USBID-License.txt for details.
USB-IDs-for-free.txt for details.
Objective Development also has some license offerings which include product
IDs. See http://www.obdev.at/vusb/ for details.
@ -114,13 +113,28 @@ IDs. See http://www.obdev.at/vusb/ for details.
DEVELOPMENT SYSTEM
==================
This driver has been developed and optimized for the GNU compiler version 3
(gcc 3). It does work well with gcc 4, but with bigger code size. We recommend
that you use the GNU compiler suite because it is freely available. V-USB
has also been ported to the IAR compiler and assembler. It has been tested
with IAR 4.10B/W32 and 4.12A/W32 on an ATmega8 with the "small" and "tiny"
memory model. Not every release is tested with IAR CC and the driver may
therefore fail to compile with IAR. Please note that gcc is more efficient for
usbdrv.c because this module has been deliberately optimized for gcc.
and 4. We recommend that you use the GNU compiler suite because it is freely
available. V-USB has also been ported to the IAR compiler and assembler. It
has been tested with IAR 4.10B/W32 and 4.12A/W32 on an ATmega8 with the
"small" and "tiny" memory model. Not every release is tested with IAR CC and
the driver may therefore fail to compile with IAR. Please note that gcc is
more efficient for usbdrv.c because this module has been deliberately
optimized for gcc.
Gcc version 3 produces smaller code than version 4 due to new optimizing
capabilities which don't always improve things on 8 bit CPUs. The code size
generated by gcc 4 can be reduced with the compiler options
-fno-move-loop-invariants, -fno-tree-scev-cprop and
-fno-inline-small-functions in addition to -Os. On devices with more than
8k of flash memory, we also recommend the linker option --relax (written as
-Wl,--relax for gcc) to convert absolute calls into relative where possible.
For more information about optimizing options see:
http://www.tty1.net/blog/2008-04-29-avr-gcc-optimisations_en.html
These optimizations are good for gcc 4.x. Version 3.x of gcc does not support
most of these options and produces good code anyway.
USING V-USB FOR FREE

154
avr/usbload/usbdrv/USBID-License.txt
View File

@ -1,154 +0,0 @@
Royalty-Free Non-Exclusive Use of USB Product-IDs
=================================================
Version 2009-04-13
Strictly speaking, this is not a license. You can't give a license to use
a simple number (such as e.g. 1500) for any purpose. This is a set of rules
which should make it possible to build USB devices without the requirement
for individual USB IDs. If you break one of the rules, you will run into
technical problems sooner or later, but you don't risk legal trouble.
OBJECTIVE DEVELOPMENT Software GmbH hereby grants you the non-exclusive
right to use four USB.org vendor-ID (VID) / product-ID (PID) pairs with
products based on Objective Development's firmware-only USB driver for
Atmel AVR microcontrollers:
* VID = 5824 (=0x16c0) / PID = 1500 (=0x5dc) for devices implementing no
USB device class (vendor-class devices with USB class = 0xff). Devices
using this pair will be referred to as "VENDOR CLASS" devices.
* VID = 5824 (=0x16c0) / PID = 1503 (=0x5df) for HID class devices
(excluding mice and keyboards). Devices using this pair will be referred
to as "HID CLASS" devices.
* VID = 5824 (=0x16c0) / PID = 1505 (=0x5e1) for CDC class modem devices
Devices using this pair will be referred to as "CDC-ACM CLASS" devices.
* VID = 5824 (=0x16c0) / PID = 1508 (=0x5e4) for MIDI class devices
Devices using this pair will be referred to as "MIDI CLASS" devices.
Since the granted right is non-exclusive, the same VID/PID pairs may be
used by many companies and individuals for different products. To avoid
conflicts, your device and host driver software MUST adhere to the rules
outlined below.
OBJECTIVE DEVELOPMENT Software GmbH has obtained these VID/PID pairs from
Wouter van Ooijen (see www.voti.nl) for exclusive disposition. Wouter van
Ooijen has obtained the VID from the USB Implementers Forum, Inc.
(see www.usb.org). The VID is registered for the company name
"Van Ooijen Technische Informatica".
RULES AND RESTRICTIONS
======================
(1) The USB device MUST provide a textual representation of the
manufacturer and product identification. The manufacturer identification
MUST be available at least in USB language 0x0409 (English/US).
(2) The textual manufacturer identification MUST contain either an Internet
domain name (e.g. "mycompany.com") registered and owned by you, or an
e-mail address under your control (e.g. "myname@gmx.net"). You can embed
the domain name or e-mail address in any string you like, e.g. "Objective
Development http://www.obdev.at/vusb/".
(3) You are responsible for retaining ownership of the domain or e-mail
address for as long as any of your products are in use.
(4) You may choose any string for the textual product identification, as
long as this string is unique within the scope of your textual manufacturer
identification.
(5) Matching of device-specific drivers MUST be based on the textual
manufacturer and product identification in addition to the usual VID/PID
matching. This means that operating system features which are based on
VID/PID matching only (e.g. Windows kernel level drivers, automatic actions
when the device is plugged in etc) MUST NOT be used. The driver matching
MUST be a comparison of the entire strings, NOT a sub-string match. For
CDC-ACM CLASS and MIDI CLASS devices, a generic class driver should be used
and the matching is based on the USB device class.
(6) The extent to which VID/PID matching is allowed for non device-specific
drivers or features depends on the operating system and particular VID/PID
pair used:
* Mac OS X, Linux, FreeBSD and other Unixes: No VID/PID matching is
required and hence no VID/PID-only matching is allowed at all.
* Windows: The operating system performs VID/PID matching for the kernel
level driver. You are REQUIRED to use libusb-win32 (see
http://libusb-win32.sourceforge.net/) as the kernel level driver for
VENDOR CLASS devices. HID CLASS devices all use the generic HID class
driver shipped with Windows, except mice and keyboards. You therefore
MUST NOT use any of the shared VID/PID pairs for mice or keyboards.
CDC-ACM CLASS devices require a ".inf" file which matches on the VID/PID
pair. This ".inf" file MUST load the "usbser" driver to configure the
device as modem (COM-port).
(7) OBJECTIVE DEVELOPMENT Software GmbH disclaims all liability for any
problems which are caused by the shared use of these VID/PID pairs. You
have been warned that the sharing of VID/PID pairs may cause problems. If
you want to avoid them, get your own VID/PID pair for exclusive use.
HOW TO IMPLEMENT THESE RULES
============================
The following rules are for VENDOR CLASS and HID CLASS devices. CDC-ACM
CLASS and MIDI CLASS devices use the operating system's class driver and
don't need a custom driver.
The host driver MUST iterate over all devices with the given VID/PID
numbers in their device descriptors and query the string representation for
the manufacturer name in USB language 0x0409 (English/US). It MUST compare
the ENTIRE string with your textual manufacturer identification chosen in
(2) above. A substring search for your domain or e-mail address is NOT
acceptable. The driver MUST NOT touch the device (other than querying the
descriptors) unless the strings match.
For all USB devices with matching VID/PID and textual manufacturer
identification, the host driver must query the textual product
identification and string-compare it with the name of the product it can
control. It may only initialize the device if the product matches exactly.
Objective Development provides examples for these matching rules with the
"PowerSwitch" project (using libusb) and with the "Automator" project
(using Windows calls on Windows and libusb on Unix).
Technical Notes:
================
Sharing the same VID/PID pair among devices is possible as long as ALL
drivers which match the VID/PID also perform matching on the textual
identification strings. This is easy on all operating systems except
Windows, since Windows establishes a static connection between the VID/PID
pair and a kernel level driver. All devices with the same VID/PID pair must
therefore use THE SAME kernel level driver.
We therefore demand that you use libusb-win32 for VENDOR CLASS devices.
This is a generic kernel level driver which allows all types of USB access
for user space applications. This is only a partial solution of the
problem, though, because different device drivers may come with different
versions of libusb-win32 and they may not work with the libusb version of
the respective other driver. You are therefore encouraged to test your
driver against a broad range of libusb-win32 versions. Do not use new
features in new versions, or check for their existence before you use them.
When a new libusb-win32 becomes available, make sure that your driver is
compatible with it.
For HID CLASS devices it is necessary that all those devices bind to the
same kernel driver: Microsoft's generic USB HID driver. This is true for
all HID devices except those with a specialized driver. Currently, the only
HIDs with specialized drivers are mice and keyboards. You therefore MUST
NOT use a shared VID/PID with mouse and keyboard devices.
Sharing the same VID/PID among different products is unusual and probably
violates the USB specification. If you do it, you do it at your own risk.
To avoid possible incompatibilities, we highly recommend that you get your
own VID/PID pair if you intend to sell your product. Objective
Development's commercial licenses for V-USB include a PID for
unrestricted exclusive use.

1
avr/usbload/usbdrv/asmcommon.inc
View File

@ -5,7 +5,6 @@
* Tabsize: 4
* Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
* Revision: $Id$
*/
/* Do not link this file! Link usbdrvasm.S instead, which includes the

1
avr/usbload/usbdrv/oddebug.c
View File

@ -5,7 +5,6 @@
* Tabsize: 4
* Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
* This Revision: $Id: oddebug.c 692 2008-11-07 15:07:40Z cs $
*/
#include "oddebug.h"

1
avr/usbload/usbdrv/oddebug.h
View File

@ -5,7 +5,6 @@
* Tabsize: 4
* Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
* This Revision: $Id: oddebug.h 692 2008-11-07 15:07:40Z cs $
*/
#ifndef __oddebug_h_included__

65
avr/usbload/usbdrv/usbconfig-prototype.h
View File

@ -5,7 +5,6 @@
* Tabsize: 4
* Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
* This Revision: $Id: usbconfig-prototype.h 740 2009-04-13 18:23:31Z cs $
*/
#ifndef __usbconfig_h_included__
@ -45,10 +44,12 @@ section at the end of this file).
*/
#define USB_CFG_CLOCK_KHZ (F_CPU/1000)
/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
* 16500 and 20000. The 12.8 MHz and 16.5 MHz versions of the code require no
* crystal, they tolerate +/- 1% deviation from the nominal frequency. All
* other rates require a precision of 2000 ppm and thus a crystal!
* Default if not specified: 12 MHz
* 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
* require no crystal, they tolerate +/- 1% deviation from the nominal
* frequency. All other rates require a precision of 2000 ppm and thus a
* crystal!
* Since F_CPU should be defined to your actual clock rate anyway, you should
* not need to modify this setting.
*/
#define USB_CFG_CHECK_CRC 0
/* Define this to 1 if you want that the driver checks integrity of incoming
@ -144,6 +145,11 @@ section at the end of this file).
* of the macros usbDisableAllRequests() and usbEnableAllRequests() in
* usbdrv.h.
*/
#define USB_CFG_DRIVER_FLASH_PAGE 0
/* If the device has more than 64 kBytes of flash, define this to the 64 k page
* where the driver's constants (descriptors) are located. Or in other words:
* Define this to 1 for boot loaders on the ATMega128.
*/
#define USB_CFG_LONG_TRANSFERS 0
/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
* in a single control-in or control-out transfer. Note that the capability
@ -201,24 +207,36 @@ section at the end of this file).
/* define this macro to 1 if you want the function usbMeasureFrameLength()
* compiled in. This function can be used to calibrate the AVR's RC oscillator.
*/
#define USB_USE_FAST_CRC 0
/* The assembler module has two implementations for the CRC algorithm. One is
* faster, the other is smaller. This CRC routine is only used for transmitted
* messages where timing is not critical. The faster routine needs 31 cycles
* per byte while the smaller one needs 61 to 69 cycles. The faster routine
* may be worth the 32 bytes bigger code size if you transmit lots of data and
* run the AVR close to its limit.
*/
/* -------------------------- Device Description --------------------------- */
#define USB_CFG_VENDOR_ID 0xc0, 0x16
#define USB_CFG_VENDOR_ID 0xc0, 0x16 /* = 0x16c0 = 5824 = voti.nl */
/* USB vendor ID for the device, low byte first. If you have registered your
* own Vendor ID, define it here. Otherwise you use one of obdev's free shared
* VID/PID pairs. Be sure to read USBID-License.txt for rules!
* + This template uses obdev's shared VID/PID pair: 0x16c0/0x5dc.
* + Use this VID/PID pair ONLY if you understand the implications!
* own Vendor ID, define it here. Otherwise you may use one of obdev's free
* shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
* *** IMPORTANT NOTE ***
* This template uses obdev's shared VID/PID pair for Vendor Class devices
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
* the implications!
*/
#define USB_CFG_DEVICE_ID 0xdc, 0x05
#define USB_CFG_DEVICE_ID 0xdc, 0x05 /* = 0x05dc = 1500 */
/* This is the ID of the product, low byte first. It is interpreted in the
* scope of the vendor ID. If you have registered your own VID with usb.org
* or if you have licensed a PID from somebody else, define it here. Otherwise
* you use obdev's free shared VID/PID pair. Be sure to read the rules in
* USBID-License.txt!
* + This template uses obdev's shared VID/PID pair: 0x16c0/0x5dc.
* + Use this VID/PID pair ONLY if you understand the implications!
* you may use one of obdev's free shared VID/PID pairs. See the file
* USB-IDs-for-free.txt for details!
* *** IMPORTANT NOTE ***
* This template uses obdev's shared VID/PID pair for Vendor Class devices
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
* the implications!
*/
#define USB_CFG_DEVICE_VERSION 0x00, 0x01
/* Version number of the device: Minor number first, then major number.
@ -230,14 +248,14 @@ section at the end of this file).
* are interpreted as Unicode (UTF-16) entities.
* If you don't want a vendor name string, undefine these macros.
* ALWAYS define a vendor name containing your Internet domain name if you use
* obdev's free shared VID/PID pair. See the file USBID-License.txt for
* obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
* details.
*/
#define USB_CFG_DEVICE_NAME 'T', 'e', 'm', 'p', 'l', 'a', 't', 'e'
#define USB_CFG_DEVICE_NAME_LEN 8
/* Same as above for the device name. If you don't want a device name, undefine
* the macros. See the file USBID-License.txt before you assign a name if you
* use a shared VID/PID.
* the macros. See the file USB-IDs-for-free.txt before you assign a name if
* you use a shared VID/PID.
*/
/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
@ -337,6 +355,15 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_HID_REPORT 0
#define USB_CFG_DESCR_PROPS_UNKNOWN 0
#define usbMsgPtr_t unsigned short
/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
* a scalar type here because gcc generates slightly shorter code for scalar
* arithmetics than for pointer arithmetics. Remove this define for backward
* type compatibility or define it to an 8 bit type if you use data in RAM only
* and all RAM is below 256 bytes (tiny memory model in IAR CC).
*/
/* ----------------------- Optional MCU Description ------------------------ */
/* The following configurations have working defaults in usbdrv.h. You
@ -352,6 +379,6 @@ section at the end of this file).
/* #define USB_INTR_ENABLE_BIT INT0 */
/* #define USB_INTR_PENDING GIFR */
/* #define USB_INTR_PENDING_BIT INTF0 */
/* #define USB_INTR_VECTOR SIG_INTERRUPT0 */
/* #define USB_INTR_VECTOR INT0_vect */
#endif /* __usbconfig_h_included__ */

37
avr/usbload/usbdrv/usbdrv.c
View File

@ -5,10 +5,8 @@
* Tabsize: 4
* Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
* This Revision: $Id: usbdrv.c 740 2009-04-13 18:23:31Z cs $
*/
#include "usbportability.h"
#include "usbdrv.h"
#include "oddebug.h"
@ -45,7 +43,7 @@ uchar usbCurrentDataToken;/* when we check data toggling to ignore duplica
#endif
/* USB status registers / not shared with asm code */
uchar *usbMsgPtr; /* data to transmit next -- ROM or RAM address */
usbMsgPtr_t usbMsgPtr; /* data to transmit next -- ROM or RAM address */
static usbMsgLen_t usbMsgLen = USB_NO_MSG; /* remaining number of bytes */
static uchar usbMsgFlags; /* flag values see below */
@ -67,7 +65,7 @@ optimizing hints:
#if USB_CFG_DESCR_PROPS_STRING_0 == 0
#undef USB_CFG_DESCR_PROPS_STRING_0
#define USB_CFG_DESCR_PROPS_STRING_0 sizeof(usbDescriptorString0)
PROGMEM char usbDescriptorString0[] = { /* language descriptor */
PROGMEM const char usbDescriptorString0[] = { /* language descriptor */
4, /* sizeof(usbDescriptorString0): length of descriptor in bytes */
3, /* descriptor type */
0x09, 0x04, /* language index (0x0409 = US-English) */
@ -77,7 +75,7 @@ PROGMEM char usbDescriptorString0[] = { /* language descriptor */
#if USB_CFG_DESCR_PROPS_STRING_VENDOR == 0 && USB_CFG_VENDOR_NAME_LEN
#undef USB_CFG_DESCR_PROPS_STRING_VENDOR
#define USB_CFG_DESCR_PROPS_STRING_VENDOR sizeof(usbDescriptorStringVendor)
PROGMEM int usbDescriptorStringVendor[] = {
PROGMEM const int usbDescriptorStringVendor[] = {
USB_STRING_DESCRIPTOR_HEADER(USB_CFG_VENDOR_NAME_LEN),
USB_CFG_VENDOR_NAME
};
@ -86,7 +84,7 @@ PROGMEM int usbDescriptorStringVendor[] = {
#if USB_CFG_DESCR_PROPS_STRING_PRODUCT == 0 && USB_CFG_DEVICE_NAME_LEN
#undef USB_CFG_DESCR_PROPS_STRING_PRODUCT
#define USB_CFG_DESCR_PROPS_STRING_PRODUCT sizeof(usbDescriptorStringDevice)
PROGMEM int usbDescriptorStringDevice[] = {
PROGMEM const int usbDescriptorStringDevice[] = {
USB_STRING_DESCRIPTOR_HEADER(USB_CFG_DEVICE_NAME_LEN),
USB_CFG_DEVICE_NAME
};
@ -95,7 +93,7 @@ PROGMEM int usbDescriptorStringDevice[] = {
#if USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER == 0 && USB_CFG_SERIAL_NUMBER_LEN
#undef USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER sizeof(usbDescriptorStringSerialNumber)
PROGMEM int usbDescriptorStringSerialNumber[] = {
PROGMEM const int usbDescriptorStringSerialNumber[] = {
USB_STRING_DESCRIPTOR_HEADER(USB_CFG_SERIAL_NUMBER_LEN),
USB_CFG_SERIAL_NUMBER
};
@ -108,7 +106,7 @@ PROGMEM int usbDescriptorStringSerialNumber[] = {
#if USB_CFG_DESCR_PROPS_DEVICE == 0
#undef USB_CFG_DESCR_PROPS_DEVICE
#define USB_CFG_DESCR_PROPS_DEVICE sizeof(usbDescriptorDevice)
PROGMEM char usbDescriptorDevice[] = { /* USB device descriptor */
PROGMEM const char usbDescriptorDevice[] = { /* USB device descriptor */
18, /* sizeof(usbDescriptorDevice): length of descriptor in bytes */
USBDESCR_DEVICE, /* descriptor type */
0x10, 0x01, /* USB version supported */
@ -139,7 +137,7 @@ PROGMEM char usbDescriptorDevice[] = { /* USB device descriptor */
#if USB_CFG_DESCR_PROPS_CONFIGURATION == 0
#undef USB_CFG_DESCR_PROPS_CONFIGURATION
#define USB_CFG_DESCR_PROPS_CONFIGURATION sizeof(usbDescriptorConfiguration)
PROGMEM char usbDescriptorConfiguration[] = { /* USB configuration descriptor */
PROGMEM const char usbDescriptorConfiguration[] = { /* USB configuration descriptor */
9, /* sizeof(usbDescriptorConfiguration): length of descriptor in bytes */
USBDESCR_CONFIG, /* descriptor type */
18 + 7 * USB_CFG_HAVE_INTRIN_ENDPOINT + 7 * USB_CFG_HAVE_INTRIN_ENDPOINT3 +
@ -149,9 +147,9 @@ PROGMEM char usbDescriptorConfiguration[] = { /* USB configuration descriptor
1, /* index of this configuration */
0, /* configuration name string index */
#if USB_CFG_IS_SELF_POWERED
USBATTR_SELFPOWER, /* attributes */
(1 << 7) | USBATTR_SELFPOWER, /* attributes */
#else
(char)USBATTR_BUSPOWER, /* attributes */
(1 << 7), /* attributes */
#endif
USB_CFG_MAX_BUS_POWER/2, /* max USB current in 2mA units */
/* interface descriptor follows inline: */
@ -184,7 +182,7 @@ PROGMEM char usbDescriptorConfiguration[] = { /* USB configuration descriptor
#if USB_CFG_HAVE_INTRIN_ENDPOINT3 /* endpoint descriptor for endpoint 3 */
7, /* sizeof(usbDescrEndpoint) */
USBDESCR_ENDPOINT, /* descriptor type = endpoint */
(char)0x83, /* IN endpoint number 1 */
(char)(0x80 | USB_CFG_EP3_NUMBER), /* IN endpoint number 3 */
0x03, /* attrib: Interrupt endpoint */
8, 0, /* maximum packet size */
USB_CFG_INTR_POLL_INTERVAL, /* in ms */
@ -301,7 +299,7 @@ USB_PUBLIC void usbSetInterrupt3(uchar *data, uchar len)
len = usbFunctionDescriptor(rq); \
}else{ \
len = USB_PROP_LENGTH(cfgProp); \
usbMsgPtr = (uchar *)(staticName); \
usbMsgPtr = (usbMsgPtr_t)(staticName); \
} \
}
@ -361,7 +359,8 @@ uchar flags = USB_FLG_MSGPTR_IS_ROM;
*/
static inline usbMsgLen_t usbDriverSetup(usbRequest_t *rq)
{
uchar len = 0, *dataPtr = usbTxBuf + 9; /* there are 2 bytes free space at the end of the buffer */
usbMsgLen_t len = 0;
uchar *dataPtr = usbTxBuf + 9; /* there are 2 bytes free space at the end of the buffer */
uchar value = rq->wValue.bytes[0];
#if USB_CFG_IMPLEMENT_HALT
uchar index = rq->wIndex.bytes[0];
@ -408,7 +407,7 @@ uchar index = rq->wIndex.bytes[0];
SWITCH_DEFAULT /* 7=SET_DESCRIPTOR, 12=SYNC_FRAME */
/* Should we add an optional hook here? */
SWITCH_END
usbMsgPtr = dataPtr;
usbMsgPtr = (usbMsgPtr_t)dataPtr;
skipMsgPtrAssignment:
return len;
}
@ -498,7 +497,8 @@ static uchar usbDeviceRead(uchar *data, uchar len)
}else
#endif
{
uchar i = len, *r = usbMsgPtr;
uchar i = len;
usbMsgPtr_t r = usbMsgPtr;
if(usbMsgFlags & USB_FLG_MSGPTR_IS_ROM){ /* ROM data */
do{
uchar c = USB_READ_FLASH(r); /* assign to char size variable to enforce byte ops */
@ -507,7 +507,8 @@ static uchar usbDeviceRead(uchar *data, uchar len)
}while(--i);
}else{ /* RAM data */
do{
*data++ = *r++;
*data++ = *((uchar *)r);
r++;
}while(--i);
}
usbMsgPtr = r;
@ -557,6 +558,8 @@ uchar isReset = !notResetState;
USB_RESET_HOOK(isReset);
wasReset = isReset;
}
#else
notResetState = notResetState; // avoid compiler warning
#endif
}

57
avr/usbload/usbdrv/usbdrv.h
View File

@ -5,7 +5,6 @@
* Tabsize: 4
* Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
* This Revision: $Id: usbdrv.h 748 2009-04-15 15:05:07Z cs $
*/
#ifndef __usbdrv_h_included__
@ -105,9 +104,9 @@ interrupt routine.
Interrupt latency:
The application must ensure that the USB interrupt is not disabled for more
than 25 cycles (this is for 12 MHz, faster clocks allow longer latency).
This implies that all interrupt routines must either be declared as "INTERRUPT"
instead of "SIGNAL" (see "avr/signal.h") or that they are written in assembler
with "sei" as the first instruction.
This implies that all interrupt routines must either have the "ISR_NOBLOCK"
attribute set (see "avr/interrupt.h") or be written in assembler with "sei"
as the first instruction.
Maximum interrupt duration / CPU cycle consumption:
The driver handles all USB communication during the interrupt service
@ -122,7 +121,7 @@ USB messages, even if they address another (low-speed) device on the same bus.
/* --------------------------- Module Interface ---------------------------- */
/* ------------------------------------------------------------------------- */
#define USBDRV_VERSION 20090415
#define USBDRV_VERSION 20121206
/* This define uniquely identifies a driver version. It is a decimal number
* constructed from the driver's release date in the form YYYYMMDD. If the
* driver's behavior or interface changes, you can use this constant to
@ -163,11 +162,24 @@ USB messages, even if they address another (low-speed) device on the same bus.
*/
#define USB_NO_MSG ((usbMsgLen_t)-1) /* constant meaning "no message" */
#ifndef usbMsgPtr_t
#define usbMsgPtr_t uchar *
#endif
/* Making usbMsgPtr_t a define allows the user of this library to define it to
* an 8 bit type on tiny devices. This reduces code size, especially if the
* compiler supports a tiny memory model.
* The type can be a pointer or scalar type, casts are made where necessary.
* Although it's paradoxical, Gcc 4 generates slightly better code for scalar
* types than for pointers.
*/
struct usbRequest; /* forward declaration */
USB_PUBLIC void usbInit(void);
/* This function must be called before interrupts are enabled and the main
* loop is entered.
* loop is entered. We exepct that the PORT and DDR bits for D+ and D- have
* not been changed from their default status (which is 0). If you have changed
* them, set both back to 0 (configure them as input with no internal pull-up).
*/
USB_PUBLIC void usbPoll(void);
/* This function must be called at regular intervals from the main loop.
@ -176,7 +188,7 @@ USB_PUBLIC void usbPoll(void);
* Please note that debug outputs through the UART take ~ 0.5ms per byte
* at 19200 bps.
*/
extern uchar *usbMsgPtr;
extern usbMsgPtr_t usbMsgPtr;
/* This variable may be used to pass transmit data to the driver from the
* implementation of usbFunctionWrite(). It is also used internally by the
* driver for standard control requests.
@ -388,13 +400,13 @@ extern volatile schar usbRxLen;
* about the various methods to define USB descriptors. If you do nothing,
* the default descriptors will be used.
*/
#define USB_PROP_IS_DYNAMIC (1 << 14)
#define USB_PROP_IS_DYNAMIC (1u << 14)
/* If this property is set for a descriptor, usbFunctionDescriptor() will be
* used to obtain the particular descriptor. Data directly returned via
* usbMsgPtr are FLASH data by default, combine (OR) with USB_PROP_IS_RAM to
* return RAM data.
*/
#define USB_PROP_IS_RAM (1 << 15)
#define USB_PROP_IS_RAM (1u << 15)
/* If this property is set for a descriptor, the data is read from RAM
* memory instead of Flash. The property is used for all methods to provide
* external descriptors.
@ -448,43 +460,43 @@ extern volatile schar usbRxLen;
#ifndef __ASSEMBLER__
extern
#if !(USB_CFG_DESCR_PROPS_DEVICE & USB_PROP_IS_RAM)
PROGMEM
PROGMEM const
#endif
char usbDescriptorDevice[];
extern
#if !(USB_CFG_DESCR_PROPS_CONFIGURATION & USB_PROP_IS_RAM)
PROGMEM
PROGMEM const
#endif
char usbDescriptorConfiguration[];
extern
#if !(USB_CFG_DESCR_PROPS_HID_REPORT & USB_PROP_IS_RAM)
PROGMEM
PROGMEM const
#endif
char usbDescriptorHidReport[];
extern
#if !(USB_CFG_DESCR_PROPS_STRING_0 & USB_PROP_IS_RAM)
PROGMEM
PROGMEM const
#endif
char usbDescriptorString0[];
extern
#if !(USB_CFG_DESCR_PROPS_STRING_VENDOR & USB_PROP_IS_RAM)
PROGMEM
PROGMEM const
#endif
int usbDescriptorStringVendor[];
extern
#if !(USB_CFG_DESCR_PROPS_STRING_PRODUCT & USB_PROP_IS_RAM)
PROGMEM
PROGMEM const
#endif
int usbDescriptorStringDevice[];
extern
#if !(USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER & USB_PROP_IS_RAM)
PROGMEM
PROGMEM const
#endif
int usbDescriptorStringSerialNumber[];
@ -511,22 +523,22 @@ int usbDescriptorStringSerialNumber[];
#if !defined __ASSEMBLER__ && (!defined USB_CFG_VENDOR_ID || !defined USB_CFG_DEVICE_ID)
#warning "You should define USB_CFG_VENDOR_ID and USB_CFG_DEVICE_ID in usbconfig.h"
/* If the user has not defined IDs, we default to obdev's free IDs.
* See USBID-License.txt for details.
* See USB-IDs-for-free.txt for details.
*/
#endif
/* make sure we have a VID and PID defined, byte order is lowbyte, highbyte */
#ifndef USB_CFG_VENDOR_ID
# define USB_CFG_VENDOR_ID 0xc0, 0x16 /* 5824 in dec, stands for VOTI */
# define USB_CFG_VENDOR_ID 0xc0, 0x16 /* = 0x16c0 = 5824 = voti.nl */
#endif
#ifndef USB_CFG_DEVICE_ID
# if USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH
# define USB_CFG_DEVICE_ID 0xdf, 0x05 /* 1503 in dec, shared PID for HIDs */
# define USB_CFG_DEVICE_ID 0xdf, 0x05 /* = 0x5df = 1503, shared PID for HIDs */
# elif USB_CFG_INTERFACE_CLASS == 2
# define USB_CFG_DEVICE_ID 0xe1, 0x05 /* 1505 in dec, shared PID for CDC Modems */
# define USB_CFG_DEVICE_ID 0xe1, 0x05 /* = 0x5e1 = 1505, shared PID for CDC Modems */
# else
# define USB_CFG_DEVICE_ID 0xdc, 0x05 /* 1500 in dec, obdev's free PID */
# define USB_CFG_DEVICE_ID 0xdc, 0x05 /* = 0x5dc = 1500, obdev's free PID */
# endif
#endif
@ -716,7 +728,8 @@ typedef struct usbRequest{
#define USBDESCR_HID_REPORT 0x22
#define USBDESCR_HID_PHYS 0x23
#define USBATTR_BUSPOWER 0x80
//#define USBATTR_BUSPOWER 0x80 // USB 1.1 does not define this value any more
#define USBATTR_BUSPOWER 0
#define USBATTR_SELFPOWER 0x40
#define USBATTR_REMOTEWAKE 0x20

137
avr/usbload/usbdrv/usbdrvasm.S
View File

@ -5,7 +5,6 @@
* Tabsize: 4
* Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
* Revision: $Id: usbdrvasm.S 740 2009-04-13 18:23:31Z cs $
*/
/*
@ -57,7 +56,11 @@ the file appropriate for the given clock rate.
#else /* __IAR_SYSTEMS_ASM__ */
# ifndef USB_INTR_VECTOR /* default to hardware interrupt INT0 */
# define USB_INTR_VECTOR SIG_INTERRUPT0
# ifdef INT0_vect
# define USB_INTR_VECTOR INT0_vect // this is the "new" define for the vector
# else
# define USB_INTR_VECTOR SIG_INTERRUPT0 // this is the "old" vector
# endif
# endif
.text
.global USB_INTR_VECTOR
@ -139,16 +142,93 @@ RTMODEL "__rt_version", "3"
#endif
; extern unsigned usbCrc16(unsigned char *data, unsigned char len);
; data: r24/25
; len: r22
#if USB_USE_FAST_CRC
; This implementation is faster, but has bigger code size
; Thanks to Slawomir Fras (BoskiDialer) for this code!
; It implements the following C pseudo-code:
; unsigned table(unsigned char x)
; {
; unsigned value;
;
; value = (unsigned)x << 6;
; value ^= (unsigned)x << 7;
; if(parity(x))
; value ^= 0xc001;
; return value;
; }
; unsigned usbCrc16(unsigned char *argPtr, unsigned char argLen)
; {
; unsigned crc = 0xffff;
;
; while(argLen--)
; crc = table(lo8(crc) ^ *argPtr++) ^ hi8(crc);
; return ~crc;
; }
; extern unsigned usbCrc16(unsigned char *argPtr, unsigned char argLen);
; argPtr r24+25 / r16+r17
; argLen r22 / r18
; temp variables:
; r18: data byte
; r19: bit counter
; r20/21: polynomial
; r23: scratch
; r24/25: crc-sum
; r26/27=X: ptr
; byte r18 / r22
; scratch r23
; resCrc r24+r25 / r16+r17
; ptr X / Z
usbCrc16:
mov ptrL, argPtrL
mov ptrH, argPtrH
ldi resCrcL, 0xFF
ldi resCrcH, 0xFF
rjmp usbCrc16LoopTest
usbCrc16ByteLoop:
ld byte, ptr+
eor resCrcL, byte ; resCrcL is now 'x' in table()
mov byte, resCrcL ; compute parity of 'x'
swap byte
eor byte, resCrcL
mov scratch, byte
lsr byte
lsr byte
eor byte, scratch
inc byte
lsr byte
andi byte, 1 ; byte is now parity(x)
mov scratch, resCrcL
mov resCrcL, resCrcH
eor resCrcL, byte ; low byte of if(parity(x)) value ^= 0xc001;
neg byte
andi byte, 0xc0
mov resCrcH, byte ; high byte of if(parity(x)) value ^= 0xc001;
clr byte
lsr scratch
ror byte
eor resCrcH, scratch
eor resCrcL, byte
lsr scratch
ror byte
eor resCrcH, scratch
eor resCrcL, byte
usbCrc16LoopTest:
subi argLen, 1
brsh usbCrc16ByteLoop
com resCrcL
com resCrcH
ret
#else /* USB_USE_FAST_CRC */
; This implementation is slower, but has less code size
;
; extern unsigned usbCrc16(unsigned char *argPtr, unsigned char argLen);
; argPtr r24+25 / r16+r17
; argLen r22 / r18
; temp variables:
; byte r18 / r22
; bitCnt r19
; poly r20+r21
; scratch r23
; resCrc r24+r25 / r16+r17
; ptr X / Z
usbCrc16:
mov ptrL, argPtrL
mov ptrH, argPtrH
@ -156,27 +236,30 @@ usbCrc16:
ldi resCrcH, 0
ldi polyL, lo8(0xa001)
ldi polyH, hi8(0xa001)
com argLen ; argLen = -argLen - 1
crcByteLoop:
subi argLen, -1
brcc crcReady ; modified loop to ensure that carry is set below
com argLen ; argLen = -argLen - 1: modified loop to ensure that carry is set
ldi bitCnt, 0 ; loop counter with starnd condition = end condition
rjmp usbCrcLoopEntry
usbCrcByteLoop:
ld byte, ptr+
ldi bitCnt, -8 ; strange loop counter to ensure that carry is set where we need it
eor resCrcL, byte
crcBitLoop:
ror resCrcH ; carry is always set here
usbCrcBitLoop:
ror resCrcH ; carry is always set here (see brcs jumps to here)
ror resCrcL
brcs crcNoXor
brcs usbCrcNoXor
eor resCrcL, polyL
eor resCrcH, polyH
crcNoXor:
subi bitCnt, -1
brcs crcBitLoop
rjmp crcByteLoop
crcReady:
usbCrcNoXor:
subi bitCnt, 224 ; (8 * 224) % 256 = 0; this loop iterates 8 times
brcs usbCrcBitLoop
usbCrcLoopEntry:
subi argLen, -1
brcs usbCrcByteLoop
usbCrcReady:
ret
; Thanks to Reimar Doeffinger for optimizing this CRC routine!
#endif /* USB_USE_FAST_CRC */
; extern unsigned usbCrc16Append(unsigned char *data, unsigned char len);
usbCrc16Append:
rcall usbCrc16
@ -277,7 +360,11 @@ usbMFTimeout:
;----------------------------------------------------------------------------
#ifndef USB_CFG_CLOCK_KHZ
# define USB_CFG_CLOCK_KHZ 12000
# ifdef F_CPU
# define USB_CFG_CLOCK_KHZ (F_CPU/1000)
# else
# error "USB_CFG_CLOCK_KHZ not defined in usbconfig.h and no F_CPU set!"
# endif
#endif
#if USB_CFG_CHECK_CRC /* separate dispatcher for CRC type modules */

1
avr/usbload/usbdrv/usbdrvasm.asm
View File

@ -5,7 +5,6 @@
* Tabsize: 4
* Copyright: (c) 2006 by OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
* This Revision: $Id$
*/
/*

1
avr/usbload/usbdrv/usbdrvasm12.inc
View File

@ -5,7 +5,6 @@
* Tabsize: 4
* Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
* This Revision: $Id: usbdrvasm12.inc 740 2009-04-13 18:23:31Z cs $
*/
/* Do not link this file! Link usbdrvasm.S instead, which includes the

37
avr/usbload/usbdrv/usbdrvasm128.inc
View File

@ -5,7 +5,6 @@
* Tabsize: 4
* Copyright: (c) 2008 by OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
* This Revision: $Id: usbdrvasm128.inc 740 2009-04-13 18:23:31Z cs $
*/
/* Do not link this file! Link usbdrvasm.S instead, which includes the
@ -31,8 +30,9 @@ limitations:
They typical range is 14.5 MHz and most AVRs can actually reach this rate.
(2) Writing EEPROM and Flash may be unreliable (short data lifetime) since
the write procedure is timed from the RC oscillator.
(3) End Of Packet detection is between bit 0 and bit 1 where the EOP condition
may not be reliable when a hub is used. It should be in bit 1.
(3) End Of Packet detection (SE0) should be in bit 1, bit it is only checked
if bits 0 and 1 both read as 0 on D- and D+ read as 0 in the middle. This may
cause problems with old hubs which delay SE0 by up to one cycle.
(4) Code size is much larger than that of the other modules.
Since almost all of this code is timing critical, don't change unless you
@ -217,8 +217,10 @@ unstuff0s:
ifioclr USBIN, USBMINUS ;[00]
ifioset USBIN, USBPLUS ;[01]
rjmp bit0IsClr ;[02] executed if first expr false or second true
jumpToSe0AndStore:
rjmp se0AndStore ;[03] executed only if both bits 0
se0AndStore: ; executed only if both bits 0
st y+, x1 ;[15/17] cycles after start of byte
rjmp se0 ;[17/19]
bit0IsClr:
ifrset phase, USBMINUS ;[04] check phase only if D- changed
lpm ;[05]
@ -228,7 +230,7 @@ bit1AfterClr:
andi phase, USBMASK ;[08]
ifioset USBIN, USBMINUS ;[09] <--- sample 1
rjmp bit1IsSet ;[10]
breq jumpToSe0AndStore ;[11]
breq se0AndStore ;[11] if D- was 0 in bits 0 AND 1 and D+ was 0 in between, we have SE0
andi shift, ~(7 << 1) ;[12]
in phase, USBIN ;[13] <- phase
breq unstuff1c ;[14]
@ -355,10 +357,6 @@ unstuff7c:
nop ;[59]
rjmp bit7IsSet ;[60]
se0AndStore:
st y+, x1 ;[15/17] cycles after start of byte
rjmp se0 ;[17/19]
bit7IsClr:
ifrset phase, USBMINUS ;[62] check phase only if D- changed
lpm ;[63]
@ -391,25 +389,24 @@ bit0IsSet:
in phase, USBIN ;[06] <- phase (one cycle too late)
ori shift, 1 << 0 ;[07]
bit1AfterSet:
andi phase, USBMASK ;[08]
andi shift, ~(7 << 1) ;[08] compensated by "ori shift, 1<<1" if bit1IsClr
ifioclr USBIN, USBMINUS ;[09] <--- sample 1
rjmp bit1IsClr ;[10]
andi shift, ~(7 << 1) ;[11]
breq unstuff1s ;[12]
in phase, USBIN ;[13] <- phase
nop ;[14]
breq unstuff1s ;[11]
nop2 ;[12] do not check for SE0 if bit 0 was 1
in phase, USBIN ;[14] <- phase (one cycle too late)
rjmp bit2AfterSet ;[15]
unstuff1s:
in phase, USBIN ;[14] <- phase (one cycle too late)
andi fix, ~(1 << 1) ;[15]
nop2 ;[08]
in phase, USBIN ;[13] <- phase
andi fix, ~(1 << 1) ;[14]
lpm ;[07]
nop2 ;[10]
bit1IsClr:
ifrset phase, USBMINUS ;[12] check phase only if D- changed
lpm ;[13]
in phase, USBIN ;[14] <- phase (one cycle too late)
breq se0AndStore ;[15] if we come from unstuff1s, Z bit is never set
ori shift, 1 << 1 ;[16]
ori shift, 1 << 1 ;[15]
nop ;[16]
bit2AfterClr:
ifioset USBIN, USBMINUS ;[17] <--- sample 2
rjmp bit2IsSet ;[18]

1
avr/usbload/usbdrv/usbdrvasm15.inc
View File

@ -5,7 +5,6 @@
* Tabsize: 4
* Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
* Revision: $Id: usbdrvasm15.inc 740 2009-04-13 18:23:31Z cs $
*/
/* Do not link this file! Link usbdrvasm.S instead, which includes the

16
avr/usbload/usbdrv/usbdrvasm16.inc
View File

@ -5,7 +5,6 @@
* Tabsize: 4
* Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
* Revision: $Id: usbdrvasm16.inc 740 2009-04-13 18:23:31Z cs $
*/
/* Do not link this file! Link usbdrvasm.S instead, which includes the
@ -117,12 +116,15 @@ haveTwoBitsK:
; Receiver loop (numbers in brackets are cycles within byte after instr)
;----------------------------------------------------------------------------
; duration of unstuffing code should be 10.66666667 cycles. We adjust "leap"
; accordingly to approximate this value in the long run.
unstuff6:
andi x2, USBMASK ;[03]
ori x3, 1<<6 ;[04] will not be shifted any more
andi shift, ~0x80;[05]
mov x1, x2 ;[06] sampled bit 7 is actually re-sampled bit 6
subi leap, 3 ;[07] since this is a short (10 cycle) bit, enforce leap bit
subi leap, -1 ;[07] total duration = 11 bits -> subtract 1/3
rjmp didUnstuff6 ;[08]
unstuff7:
@ -130,7 +132,7 @@ unstuff7:
in x2, USBIN ;[00] [10] re-sample bit 7
andi x2, USBMASK ;[01]
andi shift, ~0x80;[02]
subi leap, 3 ;[03] since this is a short (10 cycle) bit, enforce leap bit
subi leap, 2 ;[03] total duration = 10 bits -> add 1/3
rjmp didUnstuff7 ;[04]
unstuffEven:
@ -139,8 +141,8 @@ unstuffEven:
andi shift, ~0x80;[01]
andi x1, USBMASK ;[02]
breq se0 ;[03]
subi leap, 3 ;[04] since this is a short (10 cycle) bit, enforce leap bit
nop ;[05]
subi leap, -1 ;[04] total duration = 11 bits -> subtract 1/3
nop2 ;[05]
rjmp didUnstuffE ;[06]
unstuffOdd:
@ -149,8 +151,8 @@ unstuffOdd:
andi shift, ~0x80;[01]
andi x2, USBMASK ;[02]
breq se0 ;[03]
subi leap, 3 ;[04] since this is a short (10 cycle) bit, enforce leap bit
nop ;[05]
subi leap, -1 ;[04] total duration = 11 bits -> subtract 1/3
nop2 ;[05]
rjmp didUnstuffO ;[06]
rxByteLoop:

1
avr/usbload/usbdrv/usbdrvasm165.inc
View File

@ -5,7 +5,6 @@
* Tabsize: 4
* Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
* Revision: $Id: usbdrvasm165.inc 740 2009-04-13 18:23:31Z cs $
*/
/* Do not link this file! Link usbdrvasm.S instead, which includes the

1
avr/usbload/usbdrv/usbdrvasm18-crc.inc
View File

@ -5,7 +5,6 @@
* Tabsize: 4
* Copyright: (c) 2008 by Lukas Schrittwieser and OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
* Revision: $Id: usbdrvasm18-crc.inc 740 2009-04-13 18:23:31Z cs $
*/
/* Do not link this file! Link usbdrvasm.S instead, which includes the

1
avr/usbload/usbdrv/usbdrvasm20.inc
View File

@ -6,7 +6,6 @@
* Tabsize: 4
* Copyright: (c) 2008 by Jeroen Benschop and OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
* Revision: $Id: usbdrvasm20.inc 740 2009-04-13 18:23:31Z cs $
*/
/* Do not link this file! Link usbdrvasm.S instead, which includes the

7
avr/usbload/usbdrv/usbportability.h
View File

@ -5,7 +5,6 @@
* Tabsize: 4
* Copyright: (c) 2008 by OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
* This Revision: $Id: usbportability.h 740 2009-04-13 18:23:31Z cs $
*/
/*
@ -125,7 +124,11 @@ static inline void sei(void)
# include <avr/pgmspace.h>
#endif
#define USB_READ_FLASH(addr) pgm_read_byte(addr)
#if USB_CFG_DRIVER_FLASH_PAGE
# define USB_READ_FLASH(addr) pgm_read_byte_far(((long)USB_CFG_DRIVER_FLASH_PAGE << 16) | (long)(addr))
#else
# define USB_READ_FLASH(addr) pgm_read_byte(addr)
#endif
#define macro .macro
#define endm .endm