certainly something

src/Makefile

@@ -308,10 +308,10 @@ endif
 # Type: avrdude -c ?
 # to get a full listing.
 #
-AVRDUDE_PROGRAMMER = stk200
+AVRDUDE_PROGRAMMER = dragon_isp
 
 # com1 = serial port. Use lpt1 to connect to parallel port.
-AVRDUDE_PORT = /dev/parport0   # programmer connected to serial device
+AVRDUDE_PORT = usb   # programmer connected to serial device
 
 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 # AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep

src/filetypes.c

@@ -118,7 +118,7 @@ FRESULT get_db_id(uint16_t* id) {
 	file_open("/sd2snes/sd2snes.db", FA_READ);
 	if(file_res == FR_OK) {
 		file_readblock(id, 0, 2);
-/* XXX */ *id=0xdead;
+/* XXX */// *id=0xdead;
 		file_close();
 	} else {
 		*id=0xdead;

src/main.c

@@ -127,7 +127,7 @@ int main(void) {
 #ifdef CLOCK_PRESCALE
     clock_prescale_set(CLOCK_PRESCALE);
 #endif
-
+	spi_none();
     snes_reset(1);
     uart_init();
     sei();   // suspected to reset the AVR when inserting an SD card
@@ -145,6 +145,7 @@ int main(void) {
     uart_putc('W');
     fpga_init();
     fpga_pgm("/sd2snes/main.bit");
+	_delay_ms(100);
 	fpga_spi_init();
     uart_putc('!');
 	_delay_ms(100);

src/snes.c

@@ -47,7 +47,7 @@ void snes_reset(int state) {
 void snes_main_loop() {
 	if(initloop) {
 		saveram_crc_old = calc_sram_crc(saveram_base_addr, saveram_size);
-		save_sram("/quite a long test filename.srm", saveram_size, saveram_base_addr);
+		save_sram("/test.srm", saveram_size, saveram_base_addr);
 		initloop=0;
 	}
 	saveram_crc = calc_sram_crc(saveram_base_addr, saveram_size);
@@ -56,7 +56,7 @@ void snes_main_loop() {
 		uart_puthexshort(saveram_crc);
 		uart_putcrlf();
 		set_busy_led(1);
-		save_sram("/quite a long test filename.srm", saveram_size, saveram_base_addr);
+		save_sram("/test.srm", saveram_size, saveram_base_addr);
 		set_busy_led(0);
 	}
 	saveram_crc_old = saveram_crc;