cleanup schematic, edge triggered cycle start detection, debug output cleanup

src/memory.c

@@ -187,10 +187,5 @@ uint32_t calc_sram_crc(uint32_t size) {
 	uart_putc(hex[(crc>>24)&0xf]);
 	uart_putc(hex[(crc>>20)&0xf]);
 	uart_putc(hex[(crc>>16)&0xf]); */
-	uart_putc(hex[(crc>>12)&0xf]);
-	uart_putc(hex[(crc>>8)&0xf]);
-	uart_putc(hex[(crc>>4)&0xf]);
-	uart_putc(hex[(crc)&0xf]);
-	uart_putcrlf();
 	return crc;
 }

src/snes.c

@@ -53,11 +53,11 @@ void snes_main_loop() {
 	sram_crc = calc_sram_crc(sram_size);
 	if(sram_crc != sram_crc_old) {
 		uart_putc('U');
+		uart_puthexlong(sram_crc);
 		uart_putcrlf();
 		set_busy_led(1);
 		save_sram("/test.srm", sram_size, sram_base_addr);
 		set_busy_led(0);
 	}
 	sram_crc_old = sram_crc;
-	uart_putc('.');
 }

verilog/sd2snes/dcm.v

@@ -23,7 +23,9 @@ module my_dcm (
          input CLKFB,
          output CLK2X,
          output CLKFX,
-         output CLK0
+         output CLK0,
+         output LOCKED,
+         input RST
     );
 
    // DCM: Digital Clock Manager Circuit
@@ -37,15 +39,16 @@ module my_dcm (
       .CLKFX_DIVIDE(1),   // Can be any integer from 1 to 32
       .CLKFX_MULTIPLY(4), // Can be any integer from 2 to 32
       .CLKIN_DIVIDE_BY_2("FALSE"), // TRUE/FALSE to enable CLKIN divide by two feature
-      .CLKIN_PERIOD(46000.0),  // Specify period of input clock
+      .CLKIN_PERIOD(46.561),  // Specify period of input clock
       .CLKOUT_PHASE_SHIFT("NONE"), // Specify phase shift of NONE, FIXED or VARIABLE
-      .CLK_FEEDBACK("1X"),  // Specify clock feedback of NONE, 1X or 2X
+      .CLK_FEEDBACK("NONE"),  // Specify clock feedback of NONE, 1X or 2X
       .DESKEW_ADJUST("SYSTEM_SYNCHRONOUS"), // SOURCE_SYNCHRONOUS, SYSTEM_SYNCHRONOUS or
                                             //   an integer from 0 to 15
       .DFS_FREQUENCY_MODE("LOW"),  // HIGH or LOW frequency mode for frequency synthesis
       .DLL_FREQUENCY_MODE("LOW"),  // HIGH or LOW frequency mode for DLL
       .DUTY_CYCLE_CORRECTION("TRUE"), // Duty cycle correction, TRUE or FALSE
       .FACTORY_JF(16'hC080),   // FACTORY JF values
+//      .LOC("DCM_X0Y0"),
       .PHASE_SHIFT(0),     // Amount of fixed phase shift from -255 to 255
       .STARTUP_WAIT("FALSE")   // Delay configuration DONE until DCM LOCK, TRUE/FALSE
    ) DCM_inst (
@@ -68,5 +71,4 @@ module my_dcm (
       .PSINCDEC(PSINCDEC), // Dynamic phase adjust increment/decrement
       .RST(RST)        // DCM asynchronous reset input
    );
-    assign RST=0;
 endmodule

verilog/sd2snes/main.ucf

@@ -1,7 +1,6 @@
 NET "CLKIN" TNM_NET = CLKIN;
-TIMESPEC TS_CLKIN = PERIOD "CLKIN" 30 MHz HIGH 50 %;
+TIMESPEC TS_CLKIN = PERIOD "CLKIN" 21.477 MHz HIGH 50 %;
 NET "AVR_ENA" IOSTANDARD = LVCMOS33;
-NET "MODE" IOSTANDARD = LVCMOS33;
 NET "SNES_ADDR[0]" IOSTANDARD = LVCMOS33;
 NET "SNES_ADDR[10]" IOSTANDARD = LVCMOS33;
 NET "SNES_ADDR[11]" IOSTANDARD = LVCMOS33;

verilog/sd2snes/main.v

@@ -111,28 +111,64 @@ my_dcm snes_dcm(.CLKIN(CLKIN),
                   .CLK2X(CLK),
                   .CLKFB(CLKFB),
                   .CLKFX(CLK2),
-                  .CLK0(CLK0)
+                  .CLK0(CLK0),
+                  .LOCKED(DCM_LOCKED),
+                  .RST(DCM_RST)
                 );
+                
+my_dcm2 snes_dcm2(.CLKIN(CLK2),
+                 .CLKFB(CLKFB2),
+                 .CLKFX(FASTCLK),
+                 .CLK0(CLK0_2));
 
+assign CLKFB2 = CLK0_2;
+/*
+reg DCM_RESET_ACK;
+reg DCM_RST_BUF;
+reg [1:0] DCM_LOCKEDr;
+assign DCM_RST = DCM_RST_BUF;
+assign DCM_FAIL = (DCM_LOCKEDr == 2'b10);
+
+always @(posedge CLKIN) begin
+   DCM_LOCKEDr <= {DCM_LOCKEDr[0], DCM_LOCKED};
+end
+
+always @(posedge CLKIN) begin
+   if (DCM_FAIL) begin
+       DCM_RST_BUF <= 1;
+   end else begin
+       DCM_RST_BUF <= 0;
+   end
+end*/
 /*my_dcm snes_dcm2(.CLKIN(CLK),
                   .CLK2X(CLK2),
                   .CLKFB(CLKFB2),
                   .CLKFX(CLKFX2)
                 );*/
-assign CLKFB = CLK0;
+//assign CLKFB = CLK0;
 //assign CLKFB2 = CLK2;
 
 wire SNES_RW;
-reg SNES_READs;
+reg [1:0] SNES_READr;
-reg SNES_WRITEs;
+reg [1:0] SNES_WRITEr;
-reg SNES_CSs;
+reg [1:0] SNES_CSr;
+reg [1:0] SNES_CPU_CLKr;
+reg [3:0] SNES_RWr;
 
-assign SNES_RW = (SNES_READs & SNES_WRITEs);
+wire SNES_READs = (SNES_READr == 2'b11);
+wire SNES_WRITEs = (SNES_WRITEr == 2'b11);
+wire SNES_CSs = (SNES_CSr == 2'b11);
+wire SNES_CPU_CLKs = SNES_CPU_CLK; // (SNES_CPU_CLKr == 2'b11);
+wire SNES_RW_start = (SNES_RWr == 4'b1110); // falling edge marks beginning of cycle
+
+assign SNES_RW = (SNES_READ & SNES_WRITE);
 
 always @(posedge CLK2) begin
-   SNES_READs <= SNES_READ;
+   SNES_READr <= {SNES_READr[0], SNES_READ};
-   SNES_WRITEs <= SNES_WRITE;
+   SNES_WRITEr <= {SNES_WRITEr[0], SNES_WRITE};
-   SNES_CSs <= SNES_CS;
+   SNES_CSr <= {SNES_CSr[0], SNES_CS};
+   SNES_CPU_CLKr <= {SNES_CPU_CLKr[0], SNES_CPU_CLK};
+   SNES_RWr <= {SNES_RWr[2:0], SNES_RW};
 end
 reg ADDR_WRITE;
 
@@ -186,7 +222,7 @@ parameter STATE_7 = 10'b0010000000;
 parameter STATE_8 = 10'b0100000000;
 parameter STATE_9 = 10'b1000000000;
 
-reg [9:0] STATE;
+reg [10:0] STATE;
 reg [3:0] STATEIDX;
 
 reg STATE_RESET, CYCLE_RESET, CYCLE_RESET_ACK;
@@ -264,18 +300,25 @@ end
 // the minimum of 6 cycles to get everything done.
 
 always @(posedge CLK2) begin
-   if (!SNES_RW /* || !AVR_ENA */) begin
+   if (SNES_RW_start /* || !AVR_ENA */) //begin
-      if (!CYCLE_RESET_ACK) 
+//      if (!CYCLE_RESET_ACK) 
          CYCLE_RESET <= 1;
       else
          CYCLE_RESET <= 0;
-   end
+//   end
 end
 
 always @(posedge CLK2) begin
-       if (CYCLE_RESET && !CYCLE_RESET_ACK) begin
+       if (SNES_RW_start/* && !CYCLE_RESET_ACK*/) begin
-          CYCLE_RESET_ACK <= 1;
+//          CYCLE_RESET_ACK <= 1;
           STATE <= STATE_0;
+         SNES_READ_CYCLE <= SNES_READ;
+         SNES_WRITE_CYCLE <= SNES_WRITE;
+         AVR_READ_CYCLE <= AVR_READ;
+         AVR_WRITE_CYCLE <= AVR_WRITE;
+
+//       end else if (!DCM_LOCKED) begin
+//          CYCLE_RESET_ACK <= 0;  // ready for new cycle
        end else begin
            case (STATE)
               STATE_0:
@@ -311,10 +354,6 @@ always @(posedge CLK2) begin
 
    case (STATE)   
       STATE_9: begin
-         SNES_READ_CYCLE <= SNES_READs;
-         SNES_WRITE_CYCLE <= SNES_WRITEs;
-         AVR_READ_CYCLE <= AVR_READ;
-         AVR_WRITE_CYCLE <= AVR_WRITE;
          STATEIDX <= 9;
       end
       
@@ -353,6 +392,8 @@ always @(posedge CLK2) begin
       STATE_8: begin
          STATEIDX <= 0;
       end
+      default:
+         STATEIDX <= 9;
    endcase      
 end
 

verilog/sd2snes/sd2snes.xise

@@ -61,6 +61,10 @@
       <association xil_pn:name="PostTranslateSimulation"/>
       <library xil_pn:name="verilog"/>
     </file>
+    <file xil_pn:name="dcm2.v" xil_pn:type="FILE_VERILOG">
+      <association xil_pn:name="Implementation"/>
+      <association xil_pn:name="BehavioralSimulation"/>
+    </file>
   </files>
 
   <properties>