configs/light_lpi4a_cluster_16g_defconfig: fix typo

16gb -> 16g Signed-off-by: nekorouter <nekorouter@outlook.com>
ci: remove build mainline binarys command
2026-06-21 17:12:31 +02:00 · 2025-09-03 19:07:53 +08:00 · 2025-08-13 16:32:47 +08:00 · 2025-08-13 16:32:47 +08:00 · 2025-03-17 05:54:24 +08:00 · 2025-03-17 05:54:24 +08:00
24 changed files with 602 additions and 68 deletions
--- a/.github/workflows/build.yml
+++ b/.github/workflows/build.yml
@@ -71,6 +71,18 @@ jobs:
                make -j$(nproc)
                find . -name "u-boot-with-spl.bin" | xargs -I{} cp -av {} ${GITHUB_WORKSPACE}/output/u-boot-with-spl-lcon4a-16g.bin
                make clean
+                make light_lpi4a_plastic_defconfig
+                make -j$(nproc)
+                find . -name "u-boot-with-spl.bin" | xargs -I{} cp -av {} ${GITHUB_WORKSPACE}/output/u-boot-with-spl-laptop4a.bin
+                make clean
+                make light_lpi4a_plastic_16g_defconfig
+                make -j$(nproc)
+                find . -name "u-boot-with-spl.bin" | xargs -I{} cp -av {} ${GITHUB_WORKSPACE}/output/u-boot-with-spl-laptop4a-16g.bin
+                make clean
+                make light_lpi4a_pocket_defconfig
+                make -j$(nproc)
+                find . -name "u-boot-with-spl.bin" | xargs -I{} cp -av {} ${GITHUB_WORKSPACE}/output/u-boot-with-spl-pocket4a.bin
+                make clean
                make light_lpi4a_cluster_defconfig
                make -j$(nproc)
                find . -name "u-boot-with-spl.bin" | xargs -I{} cp -av {} ${GITHUB_WORKSPACE}/output/u-boot-with-spl-lc4a.bin
@@ -87,6 +99,10 @@ jobs:
                make -j$(nproc)
                find . -name "u-boot-with-spl.bin" | xargs -I{} cp -av {} ${GITHUB_WORKSPACE}/output/u-boot-with-spl-vala.bin
                make clean
+                make light_milkv_meles_16g_defconfig
+                make -j$(nproc)
+                find . -name "u-boot-with-spl.bin" | xargs -I{} cp -av {} ${GITHUB_WORKSPACE}/output/u-boot-with-spl-meles-16g.bin
+                make clean
                make light_milkv_meles_dualrank_defconfig
                make -j$(nproc)
                find . -name "u-boot-with-spl.bin" | xargs -I{} cp -av {} ${GITHUB_WORKSPACE}/output/u-boot-with-spl-meles.bin
@@ -95,35 +111,17 @@ jobs:
                make -j$(nproc)
                find . -name "u-boot-with-spl.bin" | xargs -I{} cp -av {} ${GITHUB_WORKSPACE}/output/u-boot-with-spl-meles-4g.bin

-                # mainline support
+                # 8g emmc support
+                sed -i 's/name=swap,size=4096MiB,type=swap/name=swap,size=2MiB,type=swap/' include/configs/light-c910.h
                make clean
                make light_lpi4a_defconfig
-                sed -i 's#thead/light-lpi4a.dtb#thead/th1520-lichee-pi-4a.dtb#' .config
                make -j$(nproc)
-                find . -name "u-boot-with-spl.bin" | xargs -I{} cp -av {} ${GITHUB_WORKSPACE}/output/u-boot-with-spl-lpi4a-main.bin
-
-                make clean
-                make light_lpi4a_16g_defconfig
-                sed -i 's#thead/light-lpi4a-16gb.dtb#thead/th1520-lichee-pi-4a-16g.dtb#' .config
-                make -j$(nproc)
-                find . -name "u-boot-with-spl.bin" | xargs -I{} cp -av {} ${GITHUB_WORKSPACE}/output/u-boot-with-spl-lpi4a-16g-main.bin
-
-                make clean
-                make light_lpi4a_cluster_defconfig
-                sed -i 's#thead/light-lpi4a-cluster.dtb#thead/th1520-lichee-cluster-4a.dtb#' .config
-                make -j$(nproc)
-                find . -name "u-boot-with-spl.bin" | xargs -I{} cp -av {} ${GITHUB_WORKSPACE}/output/u-boot-with-spl-lc4a-main.bin
-
-                make clean
-                make light_lpi4a_cluster_16g_defconfig
-                sed -i 's#thead/light-lpi4a-cluster-16gb.dtb#thead/th1520-lichee-cluster-4a-16g.dtb#' .config
-                make -j$(nproc)
-                find . -name "u-boot-with-spl.bin" | xargs -I{} cp -av {} ${GITHUB_WORKSPACE}/output/u-boot-with-spl-lc4a-16g-main.bin
+                find . -name "u-boot-with-spl.bin" | xargs -I{} cp -av {} ${GITHUB_WORKSPACE}/output/u-boot-with-spl-lpi4a_8gemmc.bin
              popd
              tree ${GITHUB_WORKSPACE}/output

      - name: 'Upload Artifact'
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
        with:
          name: thead-u-uboot-${{ matrix.name }}
          path: output/*.bin
--- a/arch/riscv/dts/light-lpi4a.dts
+++ b/arch/riscv/dts/light-lpi4a.dts
@@ -8,6 +8,10 @@
 	#address-cells = <2>;
 	#size-cells = <2>;

+	config {
+		huben-gpio = <&gpio1_porta 16 0>;
+        };
+
 	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0xc0000000 0x0 0x40000000>;
--- a/arch/riscv/dts/light-milkv-meles.dts
+++ b/arch/riscv/dts/light-milkv-meles.dts
@@ -9,7 +9,8 @@
 	#size-cells = <2>;

 	config {
-		select-gpio = <&gpio1_porta 16 0>;
+		select-gpio = <&gpio1_porta 16 0>; // Enable the blue LED on Milk-V Meles
+		fan-gpio = <&gpio2_porta 4 0>; // Enable the fan on Milk-V Meles, see schematic for details
 	};

 	memory@0 {
--- a/arch/riscv/lib/bootm.c
+++ b/arch/riscv/lib/bootm.c
@@ -110,7 +110,7 @@ void next_stage(void)
 bool has_reset_sample(ulong dtb_addr)
 {
 	int node_offset;
-	node_offset = fdt_path_offset(dtb_addr, "/soc/reset-sample");
+	node_offset = fdt_path_offset((void *)dtb_addr, "/soc/reset-sample");
 	if (node_offset < 0) {
 		printf("## fdt has no reset_sample\n");
 		return false;
@@ -160,8 +160,8 @@ static void boot_jump_linux(bootm_headers_t *images, int flag)

 	announce_and_cleanup(fake);

-	_load_start = kernel;
-	_dtb_addr = images->ft_addr;
+	_load_start = (ulong)kernel;
+	_dtb_addr = (ulong)(images->ft_addr);
 	_dyn_info_addr = (ulong)&opensbi_info;
 	if (!has_reset_sample(_dtb_addr)) {
 		opensbi_info.magic = FW_DYNAMIC_INFO_MAGIC_VALUE;
--- a/board/thead/light-c910/board.c
+++ b/board/thead/light-c910/board.c
@@ -54,8 +54,6 @@ int board_usb_cleanup(int index, enum usb_init_type init)

 int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor)
 {
-
-
 	int ret = board_usb_init(index, USB_INIT_HOST);
 	if (ret != 0) {
 		puts("Failed to initialize board for USB\n");
@@ -246,7 +244,7 @@ int do_bootslave(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 }
 #endif

-static void light_c910_set_gpio_output_high(void)
+static void light_c910_set_gpio_output_high(const char* gpio_name)
 {
 	ofnode node;
 	struct gpio_desc select_gpio;
@@ -259,9 +257,9 @@ static void light_c910_set_gpio_output_high(void)
 		return;
 	}

-	if (gpio_request_by_name_nodev(node, "select-gpio", 0,
+	if (gpio_request_by_name_nodev(node, gpio_name, 0,
 				       &select_gpio, GPIOD_IS_OUT)) {
-		printf("%s: could not find a /config/select-gpio\n", __func__);
+		printf("%s: could not find a /config/%s\n", __func__, gpio_name);
 		return;
 	}

@@ -270,7 +268,12 @@ static void light_c910_set_gpio_output_high(void)

 int misc_init_r(void)
 {
-	light_c910_set_gpio_output_high();
+	// Enable blue LED
+	light_c910_set_gpio_output_high("select-gpio");
+
+	// Enable fan on some boards(currently only on Meles)
+	// For LPi4A, the fan is controlled by PWM, see lpi4a_fan_pwm_config() in light.c
+	light_c910_set_gpio_output_high("fan-gpio");

 	return 0;
 }
--- a/board/thead/light-c910/light.c
+++ b/board/thead/light-c910/light.c
@@ -2402,13 +2402,59 @@ static void light_iopin_init(void)
 }
 #endif

+#define PWM_BASE				((void *)0xffec01c000)
+#define PWM_CHAN_REG(chan, off)	(PWM_BASE + (chan) * 0x20 + (off))
+#define PWM_PER_OFFSET			0x08  // Offset for Periodic Control Register
+#define PWM_FP_OFFSET			0x0C  // Offset for First Phase Control Register
+#define PWM_CTRL_OFFSET			0x00  // Offset for Control Register
+// See T-HEAD TH1520 Peripheral Interface User Manual
+// https://dl.sipeed.com/shareURL/LICHEE/licheepi4a/09_Doc

 static void light_pwm_config(void)
 {
-	/* pwm0 */
-	writel(0x4b0, (void *)0xFFEC01C008);
-	writel(0x258, (void *)0xFFEC01C00c);
-	writel(0x328, (void *)0xFFEC01C000);
+	/*
+	 * Enable MIPI Display backlight on PWM0.
+	 * Period=1200 clock cycles, Duty Cycle=50%
+	*/
+	// Set PWM Period to 1200 clock cycles
+	writel(0x4b0, PWM_CHAN_REG(0, PWM_PER_OFFSET));
+	// Set PWM First Phase to 600 clock cycles
+	writel(0x258, PWM_CHAN_REG(0, PWM_FP_OFFSET));
+	// Configure PWM Control Register:
+	// [9]  INACTOUT  = 1 (inactive output set to high)
+	// [8]  FPOUT     = 1 (first phase output set to high)
+	// [7:6] EVTRIG   = 00 (event-triggered mode disabled)
+	// [5:4] MODE     = 10 (continuous mode)
+	// [3]   INTEN    = 1 (interrupt enabled)
+	// [2]   CFG_UPDATE = 0 (do not wait for configuration update)
+	// [1]   SOFT_RST = 0 (software reset disabled)
+	// [0]   START    = 0 (PWM start coding enable, rising edge effective)
+	// Final address: 0xffec01c000 + 0x00 (channel 0) + 0x00 (control register offset) = 0xffec01c000
+	writel(0b1100101000, PWM_CHAN_REG(0, PWM_CTRL_OFFSET));
+}
+
+static void lpi4a_fan_pwm_config(void)
+{
+	/*
+	 * Enable fan on PWM1(GPIO10) for Lichee Pi 4A.
+	 * See LPi4A Schematic:
+	 * https://dl.sipeed.com/shareURL/LICHEE/licheepi4a/02_Schematic
+	*/
+	// Set PWM Period to 1200 clock cycles
+	writel(0x4b0, PWM_CHAN_REG(1, PWM_PER_OFFSET));
+	// Set PWM First Phase to 600 clock cycles
+	writel(0x258, PWM_CHAN_REG(1, PWM_FP_OFFSET));
+	// Configure PWM Control Register:
+	// [9]  INACTOUT  = 1 (inactive output set to high)
+	// [8]  FPOUT     = 1 (first phase output set to high)
+	// [7:6] EVTRIG   = 00 (event-triggered mode disabled)
+	// [5:4] MODE     = 10 (continuous mode)
+	// [3]   INTEN    = 0 (interrupt disabled)
+	// [2]   CFG_UPDATE = 0 (do not wait for configuration update)
+	// [1]   SOFT_RST = 0 (software reset disabled)
+	// [0]   START    = 0 (PWM start coding enable, rising edge effective)
+	// Final address: 0xffec01c000 + 0x20 (channel 1) + 0x00 (control register offset) = 0xffec01c020
+	writel(0b1100100000, PWM_CHAN_REG(1, PWM_CTRL_OFFSET));
 }

 int board_init(void)
@@ -2425,6 +2471,9 @@ int board_init(void)

 	light_pwm_config();

+#ifdef CONFIG_TARGET_LIGHT_FM_C910_LPI4A
+	lpi4a_fan_pwm_config();
+#endif
 	return 0;
 }

--- a/board/thead/light-c910/lpddr4/include/ddr_retention.h
+++ b/board/thead/light-c910/lpddr4/include/ddr_retention.h
@@ -28,6 +28,8 @@ typedef enum {
 typedef struct Ddr_Reg_Config {
    uint32_t misc_reg_num;
    uint32_t phy_reg_num;
+    uint8_t  ddr_rank;
+    uint8_t  reserve[55];
 } Ddr_Reg_Config_t;

 int dwc_ddrphy_phyinit_regInterface(regInstr myRegInstr);
--- a/board/thead/light-c910/lpddr4/src/ddr_common_func.c
+++ b/board/thead/light-c910/lpddr4/src/ddr_common_func.c
@@ -3,6 +3,7 @@
 #include "../include/common_lib.h"
 #include "../include/ddr_common_func.h"
 #include "../include/ddr_retention.h"
+#include "../include/pinmux.h"

 DDR_SYSREG_REG_SW_REG_S ddr_sysreg;

@@ -48,7 +49,7 @@ int get_ddr_rank_number() {
 #ifdef CONFIG_DDR_MSG
 	DDR_DEBUG("unsupported ddr rank type!!!\n");
 #endif
-    return NULL;
+    return 0;
 #endif
 }

--- a/board/thead/light-c910/lpddr4/src/ddr_retention.c
+++ b/board/thead/light-c910/lpddr4/src/ddr_retention.c
@@ -1,6 +1,7 @@
 #include "../include/common_lib.h"
 #include "../include/ddr_common_func.h"
 #include "../include/ddr_retention.h"
+#include "../include/pinmux.h"

 /*
 /// data structure to store register address, value pairs
@@ -1009,6 +1010,11 @@ int dwc_ddrphy_phyinit_regInterface(regInstr myRegInstr) {

    uint32_t phy_reg_num = ARRAY_SIZE(RetRegList_addr);
    ddr_Regu_Config->phy_reg_num = phy_reg_num;
+#ifdef CONFIG_DDR_DUAL_RANK
+    ddr_Regu_Config->ddr_rank   =  2;
+#else
+    ddr_Regu_Config->ddr_rank   =  1;
+#endif
    Reg_Phy_Addr_Val_t* phy_addr_t = (Reg_Phy_Addr_Val_t*)((char*)ddr_Regu_Config +  64 +  sizeof(Reg_Misc_Addr_Val_t) *  ARRAY_SIZE(MiscRegList));

 #ifdef CONFIG_DDR_MSG
--- a/board/thead/light-c910/spl.c
+++ b/board/thead/light-c910/spl.c
@@ -338,37 +338,37 @@ int boundary_verify(unsigned long boundary) {
 	phys_addr_t verify_addr4 = (phys_addr_t)boundary + CONFIG_SYS_SDRAM_BASE;

 	// verify data accessing result firstly
-	writel(MAGIC_DATA2, verify_addr);
+	writel(MAGIC_DATA2, (void *)verify_addr);
 	invalidate_dcache_range(verify_addr, verify_addr + CONFIG_SYS_CACHELINE_SIZE);
-	if (readl(verify_addr) != MAGIC_DATA2) {
+	if (readl((void *)verify_addr) != MAGIC_DATA2) {
 		printf("ddr rw test failed\n");
 		return -1;
 	}
-	writel(MAGIC_DATA, verify_addr);  // writing at beginning
+	writel(MAGIC_DATA, (void *)verify_addr);  // writing at beginning
 	invalidate_dcache_range(verify_addr, verify_addr + CONFIG_SYS_CACHELINE_SIZE);
-	if (readl(verify_addr) != MAGIC_DATA) {
+	if (readl((void *)verify_addr) != MAGIC_DATA) {
 		printf("ddr rw test failed\n");
 		return -1;
 	}
-	writel(MAGIC_DATA2, verify_addr2); // writing at one-quarter addr
-	writel(MAGIC_DATA3, verify_addr3); // writing at half addr
+	writel(MAGIC_DATA2, (void *)verify_addr2); // writing at one-quarter addr
+	writel(MAGIC_DATA3, (void *)verify_addr3); // writing at half addr
 	invalidate_dcache_range(verify_addr, verify_addr + CONFIG_SYS_CACHELINE_SIZE);
 	invalidate_dcache_range(verify_addr2, verify_addr2 + CONFIG_SYS_CACHELINE_SIZE);
 	invalidate_dcache_range(verify_addr3, verify_addr3 + CONFIG_SYS_CACHELINE_SIZE);

 	if (boundary == (unsigned long)MAXIMAL_DDR_DENSITY_MB * UNIT_MB) { // boundary by design
-		if ((readl(verify_addr) == MAGIC_DATA) &&
-			(readl(verify_addr2) == MAGIC_DATA2) &&
-			(readl(verify_addr3) == MAGIC_DATA3))
+		if ((readl((void *)verify_addr) == MAGIC_DATA) &&
+			(readl((void *)verify_addr2) == MAGIC_DATA2) &&
+			(readl((void *)verify_addr3) == MAGIC_DATA3))
 			return 0;
 	}
 	else {
-		writel(MAGIC_DATA4, verify_addr4); // writing out of boundary
+		writel(MAGIC_DATA4, (void *)verify_addr4); // writing out of boundary
 		invalidate_dcache_range(verify_addr4, verify_addr4 + CONFIG_SYS_CACHELINE_SIZE);
-		if ((readl(verify_addr) == MAGIC_DATA4) && // overwrite by verify_addr4
-			(readl(verify_addr2) == MAGIC_DATA2) &&
-			(readl(verify_addr3) == MAGIC_DATA3) &&
-			(readl(verify_addr4) == MAGIC_DATA4))
+		if ((readl((void *)verify_addr) == MAGIC_DATA4) && // overwrite by verify_addr4
+			(readl((void *)verify_addr2) == MAGIC_DATA2) &&
+			(readl((void *)verify_addr3) == MAGIC_DATA3) &&
+			(readl((void *)verify_addr4) == MAGIC_DATA4))
 			return 0;
 	}

--- a/cmd/pxe_utils.c
+++ b/cmd/pxe_utils.c
@@ -335,7 +335,7 @@ static int label_localboot(struct pxe_label *label)
 * Loads fdt overlays specified in 'fdtoverlays'.
 */
 #ifdef CONFIG_OF_LIBFDT_OVERLAY
-static void label_boot_fdtoverlay(struct cmd_tbl *cmdtp, struct pxe_label *label)
+static void label_boot_fdtoverlay(cmd_tbl_t *cmdtp, struct pxe_label *label)
 {
 	char *fdtoverlay = label->fdtoverlays;
 	struct fdt_header *working_fdt;
--- a/configs/light_beagle_defconfig
+++ b/configs/light_beagle_defconfig
@@ -13,7 +13,7 @@ CONFIG_DDR_BOARD_CONFIG=y
 CONFIG_ARCH_RV64I=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
-CONFIG_DEFAULT_FDT_FILE="thead/light-beagle.dtb"
+CONFIG_DEFAULT_FDT_FILE="thead/th1520-beaglev-ahead.dtb"
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_DISPLAY_CPUINFO=y
 CONFIG_DISPLAY_BOARDINFO=y
--- a/configs/light_lpi4a_16g_defconfig
+++ b/configs/light_lpi4a_16g_defconfig
@@ -88,7 +88,7 @@ CONFIG_USB_FUNCTION_MASS_STORAGE=y
 # CONFIG_SPL_USE_TINY_PRINTF is not set
 # CONFIG_EFI_LOADER is not set
 # CONFIG_LIGHT_SEC_BOOT is not set
-CONFIG_DEFAULT_FDT_FILE="thead/light-lpi4a-16gb.dtb"
+CONFIG_DEFAULT_FDT_FILE="thead/th1520-lichee-pi-4a-16g.dtb"
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_DM_VIDEO=y
--- a/configs/light_lpi4a_cluster_16g_defconfig
+++ b/configs/light_lpi4a_cluster_16g_defconfig
@@ -88,7 +88,7 @@ CONFIG_USB_FUNCTION_MASS_STORAGE=y
 # CONFIG_SPL_USE_TINY_PRINTF is not set
 # CONFIG_EFI_LOADER is not set
 # CONFIG_LIGHT_SEC_BOOT is not set
-CONFIG_DEFAULT_FDT_FILE="thead/light-lpi4a-cluster-16gb.dtb"
+CONFIG_DEFAULT_FDT_FILE="thead/th1520-lpi4a-cluster-16g.dtb"
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_DM_VIDEO=y
--- a/configs/light_lpi4a_cluster_defconfig
+++ b/configs/light_lpi4a_cluster_defconfig
@@ -87,7 +87,7 @@ CONFIG_USB_FUNCTION_MASS_STORAGE=y
 # CONFIG_SPL_USE_TINY_PRINTF is not set
 # CONFIG_EFI_LOADER is not set
 # CONFIG_LIGHT_SEC_BOOT is not set
-CONFIG_DEFAULT_FDT_FILE="thead/light-lpi4a-cluster.dtb"
+CONFIG_DEFAULT_FDT_FILE="thead/th1520-lpi4a-cluster.dtb"
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_DM_VIDEO=y
--- a/configs/light_lpi4a_console_16g_defconfig
+++ b/configs/light_lpi4a_console_16g_defconfig
@@ -88,7 +88,7 @@ CONFIG_USB_FUNCTION_MASS_STORAGE=y
 # CONFIG_SPL_USE_TINY_PRINTF is not set
 # CONFIG_EFI_LOADER is not set
 # CONFIG_LIGHT_SEC_BOOT is not set
-CONFIG_DEFAULT_FDT_FILE="thead/light-lpi4a-console-16g.dtb"
+CONFIG_DEFAULT_FDT_FILE="thead/th1520-lpi4a-console-16g.dtb"
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_DM_VIDEO=y
@@ -112,3 +112,8 @@ CONFIG_BOARD_RNG_SEED=y
 CONFIG_FIXUP_MEMORY_REGION=y
 CONFIG_MISC=y
 CONFIG_LIGHT_AON_CONF=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+# CONFIG_DOS_PARTITION is not set
+CONFIG_CMD_USB=y
--- a/configs/light_lpi4a_console_defconfig
+++ b/configs/light_lpi4a_console_defconfig
@@ -87,7 +87,7 @@ CONFIG_USB_FUNCTION_MASS_STORAGE=y
 # CONFIG_SPL_USE_TINY_PRINTF is not set
 # CONFIG_EFI_LOADER is not set
 # CONFIG_LIGHT_SEC_BOOT is not set
-CONFIG_DEFAULT_FDT_FILE="thead/light-lpi4a-console.dtb"
+CONFIG_DEFAULT_FDT_FILE="thead/th1520-lpi4a-console.dtb"
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_DM_VIDEO=y
@@ -111,3 +111,8 @@ CONFIG_BOARD_RNG_SEED=y
 CONFIG_FIXUP_MEMORY_REGION=y
 CONFIG_MISC=y
 CONFIG_LIGHT_AON_CONF=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+# CONFIG_DOS_PARTITION is not set
+CONFIG_CMD_USB=y
--- a/configs/light_lpi4a_defconfig
+++ b/configs/light_lpi4a_defconfig
@@ -90,7 +90,7 @@ CONFIG_USB_FUNCTION_MASS_STORAGE=y
 # CONFIG_SPL_USE_TINY_PRINTF is not set
 # CONFIG_EFI_LOADER is not set
 # CONFIG_LIGHT_SEC_BOOT is not set
-CONFIG_DEFAULT_FDT_FILE="thead/light-lpi4a.dtb"
+CONFIG_DEFAULT_FDT_FILE="thead/th1520-lichee-pi-4a.dtb"
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_DM_VIDEO=y
--- a/configs/light_lpi4a_plastic_16g_defconfig
+++ b/configs/light_lpi4a_plastic_16g_defconfig
@@ -0,0 +1,119 @@
+CONFIG_RISCV=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_ENV_SIZE=0x20000
+CONFIG_ENV_OFFSET=0xe0000
+CONFIG_NR_DRAM_BANKS=8
+CONFIG_SPL=y
+CONFIG_SMP=y
+CONFIG_TARGET_LIGHT_C910=y
+CONFIG_TARGET_LIGHT_FM_C910_LPI4A=y
+# CONFIG_THEAD_PLIC is not set
+# CONFIG_THEAD_LIGHT_TIMER is not set
+# CONFIG_THEAD_LIGHT_DIGITAL_SENSOR is not set
+CONFIG_ARCH_RV64I=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_DISPLAY_BOARDINFO=y
+# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SYS_PROMPT="LicheeLaptop4A 16G # "
+CONFIG_DDR_LP4X_3733_DUALRANK=y
+# CONFIG_DDR_LP4_3733_DUALRANK is not set
+CONFIG_DDR_BOARD_CONFIG=y
+CONFIG_CMD_BOOT_SLAVE=y
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_DDR_SCAN=y
+CONFIG_DDR_PRBS_TEST=n
+# CONFIG_DOS_PARTITION is not set
+# CONFIG_ISO_PARTITION is not set
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_OF_EMBED=y
+CONFIG_DEFAULT_DEVICE_TREE="light-lpi4a-laptop"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_CLK=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_UDP_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x10000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_DW=y
+CONFIG_DWAPB_GPIO=y
+# CONFIG_MMC_SPI is not set
+CONFIG_MMC_VERBOSE=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_SNPS=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SNPS=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MMC_RPMB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_PHY_REALTEK=y
+CONFIG_RTL8211E_PINE64_GIGABIT_FIX=y
+CONFIG_RTL8211X_PHY_FORCE_MASTER=y
+CONFIG_RTL8211F_PHY_FORCE_EEE_RXC_ON=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DESIGNWARE_SPI=y
+CONFIG_DESIGNWARE_QSPI=y
+CONFIG_USB=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="U-Boot-THEAD"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1234
+CONFIG_USB_GADGET_PRODUCT_NUM=0x8888
+CONFIG_USB_FUNCTION_MASS_STORAGE=y
+# CONFIG_SPL_USE_TINY_PRINTF is not set
+# CONFIG_EFI_LOADER is not set
+# CONFIG_LIGHT_SEC_BOOT is not set
+CONFIG_DEFAULT_FDT_FILE="thead/th1520-lpi4a-plastic-16g.dtb"
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_DM_VIDEO=y
+CONFIG_PHY=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CMD_BMP=y
+CONFIG_VIDEO_BRIDGE=y
+CONFIG_DM_PCA953X=y
+CONFIG_VIDEO_VS_DPU=y
+CONFIG_VIDEO_LCD_ILITEK_ILI9881C=y
+CONFIG_VIDEO_DW_DSI_LIGHT=y
+CONFIG_VIDEO_DW_DPHY=y
+CONFIG_VIDEO_DW_DSI_HOST=y
+CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_PMIC_VOL_INIT=y
+CONFIG_DDR_REGU_0V6=600000
+CONFIG_DDR_REGU_0V8=800000
+CONFIG_DDR_REGU_1V1=1100000
+CONFIG_BOARD_RNG_SEED=y
+CONFIG_FIXUP_MEMORY_REGION=y
+CONFIG_MISC=y
+CONFIG_LIGHT_AON_CONF=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+# CONFIG_DOS_PARTITION is not set
+CONFIG_CMD_USB=y
+
--- a/configs/light_lpi4a_plastic_defconfig
+++ b/configs/light_lpi4a_plastic_defconfig
@@ -0,0 +1,119 @@
+CONFIG_RISCV=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_ENV_SIZE=0x20000
+CONFIG_ENV_OFFSET=0xe0000
+CONFIG_NR_DRAM_BANKS=8
+CONFIG_SPL=y
+CONFIG_SMP=y
+CONFIG_TARGET_LIGHT_C910=y
+CONFIG_TARGET_LIGHT_FM_C910_LPI4A=y
+# CONFIG_THEAD_PLIC is not set
+# CONFIG_THEAD_LIGHT_TIMER is not set
+# CONFIG_THEAD_LIGHT_DIGITAL_SENSOR is not set
+CONFIG_ARCH_RV64I=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_DISPLAY_BOARDINFO=y
+# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SYS_PROMPT="LicheeLaptop4A # "
+CONFIG_DDR_LP4X_3733_DUALRANK=y
+# CONFIG_DDR_LP4_3733_DUALRANK is not set
+CONFIG_DDR_BOARD_CONFIG=y
+CONFIG_CMD_BOOT_SLAVE=y
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_DDR_SCAN=y
+CONFIG_DDR_PRBS_TEST=n
+# CONFIG_DOS_PARTITION is not set
+# CONFIG_ISO_PARTITION is not set
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_OF_EMBED=y
+CONFIG_DEFAULT_DEVICE_TREE="light-lpi4a-laptop"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_CLK=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_UDP_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x10000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_DW=y
+CONFIG_DWAPB_GPIO=y
+# CONFIG_MMC_SPI is not set
+CONFIG_MMC_VERBOSE=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_SNPS=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SNPS=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MMC_RPMB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_PHY_REALTEK=y
+CONFIG_RTL8211E_PINE64_GIGABIT_FIX=y
+CONFIG_RTL8211X_PHY_FORCE_MASTER=y
+CONFIG_RTL8211F_PHY_FORCE_EEE_RXC_ON=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DESIGNWARE_SPI=y
+CONFIG_DESIGNWARE_QSPI=y
+CONFIG_USB=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="U-Boot-THEAD"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1234
+CONFIG_USB_GADGET_PRODUCT_NUM=0x8888
+CONFIG_USB_FUNCTION_MASS_STORAGE=y
+# CONFIG_SPL_USE_TINY_PRINTF is not set
+# CONFIG_EFI_LOADER is not set
+# CONFIG_LIGHT_SEC_BOOT is not set
+CONFIG_DEFAULT_FDT_FILE="thead/th1520-lpi4a-plastic.dtb"
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_DM_VIDEO=y
+CONFIG_PHY=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CMD_BMP=y
+CONFIG_VIDEO_BRIDGE=y
+CONFIG_DM_PCA953X=y
+CONFIG_VIDEO_VS_DPU=y
+CONFIG_VIDEO_LCD_ILITEK_ILI9881C=y
+CONFIG_VIDEO_DW_DSI_LIGHT=y
+CONFIG_VIDEO_DW_DPHY=y
+CONFIG_VIDEO_DW_DSI_HOST=y
+CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_PMIC_VOL_INIT=y
+CONFIG_DDR_REGU_0V6=600000
+CONFIG_DDR_REGU_0V8=800000
+CONFIG_DDR_REGU_1V1=1100000
+CONFIG_BOARD_RNG_SEED=y
+CONFIG_FIXUP_MEMORY_REGION=y
+CONFIG_MISC=y
+CONFIG_LIGHT_AON_CONF=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+# CONFIG_DOS_PARTITION is not set
+CONFIG_CMD_USB=y
+
--- a/configs/light_lpi4a_pocket_defconfig
+++ b/configs/light_lpi4a_pocket_defconfig
@@ -0,0 +1,119 @@
+CONFIG_RISCV=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_ENV_SIZE=0x20000
+CONFIG_ENV_OFFSET=0xe0000
+CONFIG_NR_DRAM_BANKS=8
+CONFIG_SPL=y
+CONFIG_SMP=y
+CONFIG_TARGET_LIGHT_C910=y
+CONFIG_TARGET_LIGHT_FM_C910_LPI4A=y
+# CONFIG_THEAD_PLIC is not set
+# CONFIG_THEAD_LIGHT_TIMER is not set
+# CONFIG_THEAD_LIGHT_DIGITAL_SENSOR is not set
+CONFIG_ARCH_RV64I=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_DISPLAY_BOARDINFO=y
+# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SYS_PROMPT="LicheePocket4A # "
+CONFIG_DDR_LP4X_3733_DUALRANK=y
+# CONFIG_DDR_LP4_3733_DUALRANK is not set
+CONFIG_DDR_BOARD_CONFIG=y
+CONFIG_CMD_BOOT_SLAVE=y
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_DDR_SCAN=y
+CONFIG_DDR_PRBS_TEST=n
+# CONFIG_DOS_PARTITION is not set
+# CONFIG_ISO_PARTITION is not set
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_OF_EMBED=y
+CONFIG_DEFAULT_DEVICE_TREE="light-lpi4a"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_CLK=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_UDP_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x10000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_DW=y
+CONFIG_DWAPB_GPIO=y
+# CONFIG_MMC_SPI is not set
+CONFIG_MMC_VERBOSE=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_SNPS=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SNPS=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MMC_RPMB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_PHY_REALTEK=y
+CONFIG_RTL8211E_PINE64_GIGABIT_FIX=y
+CONFIG_RTL8211X_PHY_FORCE_MASTER=y
+CONFIG_RTL8211F_PHY_FORCE_EEE_RXC_ON=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DESIGNWARE_SPI=y
+CONFIG_DESIGNWARE_QSPI=y
+CONFIG_USB=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="U-Boot-THEAD"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1234
+CONFIG_USB_GADGET_PRODUCT_NUM=0x8888
+CONFIG_USB_FUNCTION_MASS_STORAGE=y
+# CONFIG_SPL_USE_TINY_PRINTF is not set
+# CONFIG_EFI_LOADER is not set
+# CONFIG_LIGHT_SEC_BOOT is not set
+CONFIG_DEFAULT_FDT_FILE="thead/th1520-lpi4a-pocket.dtb"
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_DM_VIDEO=y
+CONFIG_PHY=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CMD_BMP=y
+CONFIG_VIDEO_BRIDGE=y
+CONFIG_DM_PCA953X=y
+CONFIG_VIDEO_VS_DPU=y
+CONFIG_VIDEO_LCD_ILITEK_ILI9881C=y
+CONFIG_VIDEO_DW_DSI_LIGHT=y
+CONFIG_VIDEO_DW_DPHY=y
+CONFIG_VIDEO_DW_DSI_HOST=y
+CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_PMIC_VOL_INIT=y
+CONFIG_DDR_REGU_0V6=600000
+CONFIG_DDR_REGU_0V8=800000
+CONFIG_DDR_REGU_1V1=1100000
+CONFIG_BOARD_RNG_SEED=y
+CONFIG_FIXUP_MEMORY_REGION=y
+CONFIG_MISC=y
+CONFIG_LIGHT_AON_CONF=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+# CONFIG_DOS_PARTITION is not set
+CONFIG_CMD_USB=y
+
--- a/configs/light_milkv_meles_16g_defconfig
+++ b/configs/light_milkv_meles_16g_defconfig
@@ -0,0 +1,94 @@
+CONFIG_RISCV=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_ENV_SIZE=0x20000
+CONFIG_ENV_OFFSET=0xe0000
+CONFIG_NR_DRAM_BANKS=8
+CONFIG_SPL=y
+CONFIG_SMP=y
+CONFIG_TARGET_LIGHT_C910=y
+CONFIG_PMIC_VOL_INIT=y
+CONFIG_TARGET_LIGHT_FM_C910_MILKV_MELES=y
+CONFIG_DDR_LP4X_3733_DUALRANK=y
+CONFIG_DDR_DDP=y
+CONFIG_DDR_BOARD_CONFIG=y
+CONFIG_ARCH_RV64I=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
+CONFIG_DEFAULT_FDT_FILE="thead/th1520-milkv-meles-16g.dtb"
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_DISPLAY_BOARDINFO=y
+# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SYS_PROMPT="Milk-V Meles 16G# "
+CONFIG_CMD_BOOT_SLAVE=y
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_DDR_SCAN=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_DOS_PARTITION is not set
+# CONFIG_ISO_PARTITION is not set
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_OF_EMBED=y
+CONFIG_DEFAULT_DEVICE_TREE="light-milkv-meles"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_CLK=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_UDP_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x10000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_DM_GPIO=y
+CONFIG_DWAPB_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_DW=y
+# CONFIG_MMC_SPI is not set
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_SNPS=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_SNPS=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_PHY_REALTEK=y
+CONFIG_RTL8211E_PINE64_GIGABIT_FIX=y
+CONFIG_RTL8211X_PHY_FORCE_MASTER=y
+CONFIG_RTL8211F_PHY_FORCE_EEE_RXC_ON=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_PHY=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DESIGNWARE_SPI=y
+CONFIG_DESIGNWARE_QSPI=y
+CONFIG_USB=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="U-Boot-THEAD"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1234
+CONFIG_USB_GADGET_PRODUCT_NUM=0x8888
+CONFIG_SYS_WHITE_ON_BLACK=y
+# CONFIG_SPL_USE_TINY_PRINTF is not set
+CONFIG_OF_LIBFDT_OVERLAY=y
+# CONFIG_EFI_LOADER is not set
+CONFIG_BOARD_RNG_SEED=y
+CONFIG_FIXUP_MEMORY_REGION=y
+CONFIG_MISC=y
+CONFIG_LIGHT_AON_CONF=y
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -34,7 +34,10 @@
 */
 void xhci_flush_cache(uintptr_t addr, u32 len)
 {
-	BUG_ON((void *)addr == NULL || len == 0);
+	// th1520 will load fw_dymaic.bin into 0x0
+	// so disable it
+	// load usb 0:2 0x0 fw_dynamic.bin
+	//BUG_ON((void *)addr == NULL || len == 0);

 	flush_dcache_range(addr & ~(CACHELINE_SIZE - 1),
 				ALIGN(addr + len, CACHELINE_SIZE));
@@ -49,7 +52,10 @@ void xhci_flush_cache(uintptr_t addr, u32 len)
 */
 void xhci_inval_cache(uintptr_t addr, u32 len)
 {
-	BUG_ON((void *)addr == NULL || len == 0);
+	// th1520 will load fw_dymaic.bin into 0x0
+	// so disable it
+	// load usb 0:2 0x0 fw_dynamic.bin
+	//BUG_ON((void *)addr == NULL || len == 0);

 	invalidate_dcache_range(addr & ~(CACHELINE_SIZE - 1),
 				ALIGN(addr + len, CACHELINE_SIZE));
--- a/include/configs/light-c910.h
+++ b/include/configs/light-c910.h
@@ -145,6 +145,7 @@
 	"dtb_addr=0x03800000\0" \
 	"fdt_addr_r=0x03800000\0" \
 	"fdtoverlay_addr_r=0x03700000\0" \
+	"initrd_high=0x1a000000\0" \
 	"kernel_addr_r=0x00200000\0" \
 	"ramdisk_addr_r=0x06000000\0" \
 	"boot_conf_addr_r=0xc0000000\0" \
@@ -159,23 +160,25 @@
 	ENV_STR_BOARD \
 	"kernel_addr_r=0x00200000\0" \
 	"kdump_buf=180M\0" \
+	"boottype=mmc\0" \
 	"mmcbootpart=2\0" \
 	"default_mmcdev=1\0" \
 	"emmc_dev=0\0" \
 	"sdcard_dev=1\0" \
-	"mmc_select=if test -e mmc ${default_mmcdev}:${mmcbootpart} ${boot_conf_file}; then mmcdev=1; else mmcdev=0; fi;\0" \
+	"mmc_select=if test -e ${boottype} ${default_mmcdev}:${mmcbootpart} ${boot_conf_file}; then mmcdev=1; else mmcdev=0; fi;\0" \
 	"boot_conf_file=/extlinux/extlinux.conf\0" \
 	"uuid_rootfsA=80a5a8e9-c744-491a-93c1-4f4194fd690a\0" \
 	"uuid_swap=5ebcaaf0-e098-43b9-beef-1f8deedd135e\0" \
 	"partitions=name=table,size=2031KB;name=boot,size=500MiB,type=boot;name=swap,size=4096MiB,type=swap,uuid=${uuid_swap};name=root,size=-,type=linux,uuid=${uuid_rootfsA}\0" \
 	"gpt_partition=gpt write mmc ${emmc_dev} $partitions\0" \
 	"sdcard_gpt_partition=gpt write mmc ${sdcard_dev} $partitions\0" \
-	"load_aon=load mmc ${mmcdev}:${mmcbootpart} $fwaddr light_aon_fpga.bin;cp.b $fwaddr $aon_ram_addr $filesize;bootaon\0" \
-	"load_c906_audio=load mmc ${mmcdev}:${mmcbootpart} $fwaddr light_c906_audio.bin;cp.b $fwaddr $audio_ram_addr $filesize\0" \
-	"load_str=load mmc ${mmcdev}:${mmcbootpart} $fwaddr str.bin;cp.b $fwaddr $str_ram_addr $filesize\0" \
-	"load_opensbi=load mmc ${mmcdev}:${mmcbootpart} $opensbi_addr fw_dynamic.bin\0" \
-	"bootcmd_load=run mmc_select; run load_aon; run load_c906_audio; run load_str; run load_opensbi\0" \
-	"bootcmd=run bootcmd_load; chk_hibernate; fixup_memory_region; bootslave; sysboot mmc ${mmcdev}:${mmcbootpart} any $boot_conf_addr_r $boot_conf_file;\0" \
+	"load_aon=load ${boottype} ${mmcdev}:${mmcbootpart} $fwaddr light_aon_fpga.bin;cp.b $fwaddr $aon_ram_addr $filesize;bootaon\0" \
+	"load_c906_audio=load ${boottype} ${mmcdev}:${mmcbootpart} $fwaddr light_c906_audio.bin;cp.b $fwaddr $audio_ram_addr $filesize\0" \
+	"load_str=load ${boottype} ${mmcdev}:${mmcbootpart} $fwaddr str.bin;cp.b $fwaddr $str_ram_addr $filesize\0" \
+	"load_opensbi=load ${boottype} ${mmcdev}:${mmcbootpart} $opensbi_addr fw_dynamic.bin\0" \
+	"load_usb=usb start; load usb ${mmcdev}:${mmcbootpart} ${boot_conf_addr_r} ${boot_conf_file}; if test -e usb ${mmcdev}:${mmcbootpart} ${boot_conf_file}; then setenv boottype usb; fi;\0" \
+	"bootcmd_load=run load_usb; run mmc_select; run load_aon; run load_c906_audio; run load_str; run load_opensbi\0" \
+	"bootcmd=run bootcmd_load; chk_hibernate; fixup_memory_region; bootslave; sysboot ${boottype} ${mmcdev}:${mmcbootpart} any $boot_conf_addr_r $boot_conf_file;\0" \
 	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
 	"\0"
Author	SHA1	Message	Date
nekorouter	ac3b305def	configs/light_lpi4a_cluster_16g_defconfig: fix typo 16gb -> 16g Signed-off-by: nekorouter <nekorouter@outlook.com>	2025-09-03 19:07:53 +08:00
nekorouter	57fa274f6d	ci: remove build mainline binarys command since the only difference from "default build" and "mainline build" is the devicetree name, and the devicetree name in default build has been updated, this is not needed. Signed-off-by: nekorouter <nekorouter@outlook.com>	2025-08-13 16:32:47 +08:00
nekorouter	c1a95ddefe	configs: update devicetree names update devicetree filename to mainline-like format. Signed-off-by: nekorouter <nekorouter@outlook.com>	2025-08-13 16:32:47 +08:00
SkyRain	93ff49d9f5	enable fan in uboot for meles	2025-03-17 05:54:24 +08:00
SkyRain	6278bac553	enable PWM fan in uboot for LPi4A	2025-03-17 05:54:24 +08:00
Han Gao	b5ee6e549a	ci: update to actions/upload-artifact@v4 Signed-off-by: Han Gao <rabenda.cn@gmail.com>	2025-02-05 13:32:07 +08:00
Han Gao	3d877f3648	Revert "Linux_SDK_V2.0.2" This reverts commit `8942b2dce6`.	2025-01-10 17:54:03 +08:00
LevitatingBusinessMan (Rein Fernhout)	68565d2855	use 0 instead of NULL in function returning int	2024-12-23 15:41:01 +08:00
LevitatingBusinessMan (Rein Fernhout)	72c738e9ce	use cmd_tbl_t type	2024-12-23 15:41:01 +08:00
Lindsay Zhou	a46c283102	fix: implicit conversion and implicit function declaration errors on gcc14	2024-12-23 15:41:01 +08:00
Han Gao	71bb3b069e	fix: set initrd_high for initrd size too big Signed-off-by: Han Gao <gaohan@iscas.ac.cn> Signed-off-by: Han Gao <rabenda.cn@gmail.com>	2024-12-23 15:40:00 +08:00
devops_admin	8942b2dce6	Linux_SDK_V2.0.2 Signed-off-by: devops_admin <devops_admin@alibabacloud.com>	2024-12-23 15:40:00 +08:00
Han Gao	fc9575fa63	feat: add 8g emmc lpi4a som support Signed-off-by: Han Gao <gaohan@iscas.ac.cn> Signed-off-by: Han Gao <rabenda.cn@gmail.com>	2024-07-21 02:01:37 +08:00
钦峰	4ca0f76729	add single/dual rank support Change-Id: I633daa4a871f93c5b4d897b1d60ed23bcc198912	2024-07-21 00:29:20 +08:00
NekoRouter	660cb1b920	env: Add boot from usb	2024-07-21 00:19:51 +08:00
NekoRouter	f0e5c60169	ci: Add build for laptop4a and pocket4a	2024-07-16 21:25:44 +08:00
Lu	0248804ead	configs: add plastic & pocket config file	2024-07-16 18:31:21 +08:00
Lu	7ce2d43f6b	xhci: allow trans data on 0x0	2024-07-16 18:31:21 +08:00
Lu	dd138c76f8	th1520: enable usb host support	2024-07-16 18:31:21 +08:00
Haaland Chen	197c6cdccd	ci: enable ci for DDR-16GB meles Signed-off-by: Haaland Chen <haaland@milkv.io>	2024-07-06 19:14:03 +08:00
Haaland Chen	2a2c5264a5	configs: add DDR-16GB meles board Signed-off-by: Haaland Chen <haaland@milkv.io>	2024-07-06 19:14:03 +08:00