215 Commits

Author SHA1 Message Date
清欢
e4d83fe5e9 remove regulator_enable from dwc3 suspend & resume for rvbook 2024-06-17 22:09:06 +08:00
hlb194802
d006b031de usb driver: dwc3-thead: fix wrong regulator disable in dwc3_thead_pm_suspend regulater mismatch in dwc3_thead_pm_suspend with hub1v2 vs hubswitch
Change-Id: I33243a3cae63751f6b2c985a85d50916e85afdcd
2024-06-14 17:41:00 +08:00
Han Gao
c60ffab855 dts: fix huiweibook model
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-06-12 20:01:56 +08:00
Han Gao
61d6e77d70 [tmp] gpl symbol export: get_tcpm_port_polarity
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-06-05 11:57:45 +08:00
Han Gao
28105dd629 ci: use yocto-standard as localversion
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-06-04 16:02:31 +08:00
Han Gao
58343a5e88 dts: remove unused node & fix build error
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-06-02 00:20:17 +08:00
Han Gao
b62e9d2bad configs: enable LT8911 panel
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-06-02 00:00:56 +08:00
lin_jiayong
96fb165dd9 merge into 90b98daba35e6e8d3d64be18d6905adce98b1098 2024-06-01 23:57:29 +08:00
Han Gao
9333b0b1cc sync: huiwei: key: Remove unnecessary keys
commit: 8cafb5b87affe0ffa602db36fd1d3d44b301e252

Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-06-01 23:56:31 +08:00
lin_jiayong
ebfc038d19 hall: i2c-hid: When the Hall sensor cover is triggered, the keyboard and touchpad functions are disabled to prevent accidental triggering of the keyboard and touchpad causing system wake-up. 2024-06-01 23:55:10 +08:00
清欢
e918e0cca4 disable CONFIG_RTW_SDIO_PM_KEEP_POWER since th1520 is poweroff when str; enable CONFIG_RESUME_IN_WORKQUEUE since optimize for str time 2024-06-01 23:54:03 +08:00
Bingpeng_Lao
82e7b4b427 wifi 03271412 2024-06-01 23:53:49 +08:00
Bingpeng_Lao
166b2fb1fa wifi 03221503 2024-06-01 23:53:42 +08:00
Bingpeng_Lao
5fae7c4a41 wifi is okay 2024-06-01 23:53:34 +08:00
xianbing Zhu
43759394d6 hibernate: restart when resume fail and remove resume keep sign
If hibernation image exists, this bootup dtb is cut as
minimal system for faster to resume. So, when resume failed
need do restart because dtb was cut. Next bootup u-boot will
put a normal dtb( no valid hibernate image sign).

And more, removed resume keep sign feature for its unneed.

Signed-off-by: xianbing Zhu <xianbing.zhu@linux.alibaba.com>
Change-Id: I85b5a1eacb9e7924333de80fe99e2f5853b9576f
2024-06-01 23:53:19 +08:00
清欢
ea8582dab3 add hall resume for lid event report 2024-06-01 23:53:06 +08:00
清欢
38d42bd66e [PATCH] driver:gpio:fix edge interrupt miss after str
the Senario is gpio is config as both egde trigger and wakeup interrupt,
the system entry suspend and this gpio wakeup the system, and the polarity will
be toggle in  dwapb_do_irq, but after that dwapb_gpio_resume will
overwirte the polarity, make toggle miss, so if as wakeup int ,should
not do resum
2024-06-01 23:52:52 +08:00
dong.yan
e7aceec67d retry i2c dma chn for 10s 2024-06-01 23:52:22 +08:00
yunfei zhu
85890f4a0b [Update]Fix STR DSI i2c communication failure problem 2024-06-01 23:51:55 +08:00
hlb194802
797b673ebf drv: dpu: panel-lt8911: remove log 2024-06-01 23:51:41 +08:00
yunxian.zyf
7029ef3704 sync: huiwei: Solve reboot stability test problem
commit: 9875bcc0ce835faf034b452678ea5d1547d97b6c
2024-06-01 23:51:10 +08:00
Bingpeng_Lao
a78c95c854 sync: huiwei: 6d7e66668a8e94eeaf91ab8b41639a1234e89924
merge into bb16bfd32c08053e39e6c7b75d09f19a9e57a998
2024-06-01 23:41:55 +08:00
hlb194802
fd760c09e1 drv: wifi: remove destroy_workqueue in rtw_free_pwrctrl_priv 2024-06-01 23:36:24 +08:00
Han Gao
fa34a6a78e dts: disabled pwm-fan in huiweibook default
There is no fan in this huiweibook.

Signed-off-by: xianbing Zhu <xianbing.zhu@linux.alibaba.com>
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-06-01 23:35:51 +08:00
hlb194802
44361ed63a drv: wifi: change work queue to freezable for optimize resume speed 2024-06-01 23:34:38 +08:00
xianbing Zhu
32539f0dc7 hibernate: improve crc32 speed by calc compressed data
This commit introduce crc32 calc data by compressed instead of
uncompressed data. This improve speed of hibernation resume data
about 10% :

Change-Id: I9a90006fd42430c0fe4ba712e48fee325068ec01

------with this commmit-----
PM: hibernation: Read 788072 kbytes in 2.21 seconds (356.59 MB/s)

-----berfore this commit----
PM: hibernation: Read 786300 kbytes in 2.45 seconds (320.93 MB/s)

Before this the crc32 of data is uncompress origin data,which is
huge.
The risk of this change is we not checked the origin data, but
the compressed data is check ok can equal to uncompressed data
ok mostly. For the data become invalid mostly is from disk,
for example : human mistook erasing.

Signed-off-by: xianbing Zhu <xianbing.zhu@linux.alibaba.com>
Change-Id: I7e8d968373667fa4532f527f6a63c37711169711
2024-06-01 23:33:41 +08:00
xianbing Zhu
4e582eb6b3 i2c-hid: fix i2-hid retry bugs
Before it was static value.

Signed-off-by: xianbing Zhu <xianbing.zhu@linux.alibaba.com>
2024-06-01 23:33:25 +08:00
yunxian.zyf
f50a437148 Sovle dsi&hdmi refresh probelm at the time of STD 2024-06-01 23:33:09 +08:00
hlb194802
15d53ae438 driver usb: fix std xhci resume error
Change-Id: I61cc3dd12ca1fa8ef5166b72687309692a7abd14
2024-06-01 23:31:58 +08:00
hlb194802
9d3e776a62 driver usb: optimize pm resume time, do resume in runtime_resume
Change-Id: I89ddf31061653767387fd0745eeaaecadfc7fefd
2024-06-01 23:31:38 +08:00
yunxian.zyf
b76b15d078 sync: huiwei: 5b7b9f869c27505571944db1a6bf8815878b4bba
merge 13 commits to one

Add 8911edp driver

fix hall seense lpm logic

add some debug info to mh248

PR:gerrit-4305/4306

PR:gerrit-4307

PR:gerrit-4308: hibernate: add resume keep swap signature for fastresume

PR:gerrit-4309:Solve STD problem for DPU releted clock gate not enabled

PR:gerrit-4310,driver usb: optimize pm resume time, do resume in runtime_resume

PR:gerrit-4317,padctrl:light: add aon pinmux backup and restore

Revert "add some debug info to mh248"

This reverts commit c6cbf3c7d49caba33eee014caec3da24eb9d2388.

remove suspend state judge in mh248

Fix LT8911 panel str resume problem

Revert "PR:gerrit-4310,driver usb: optimize pm resume time, do resume in runtime_resume"

This reverts commit 690823c5528df8e7743ce3954aec6c4473500b91.
2024-06-01 23:30:03 +08:00
lin_jiayong
92ed9d94c6 sync: huiwei: 6e3001aa0c625f07407a414e0d5e0e8e10dcded6
merge into 0e30013865202a00d2117a2e7ee4a15eddac6ea6
2024-06-01 23:21:52 +08:00
lin_jiayong
698e02e86a sync: huiwei: e94a4cf98b93de7f711637033a43f0e2f5f3ac7a
merge into c2a6429c9b9d3fe12738317f410fb1b5cb96cb3b
2024-06-01 23:16:07 +08:00
Han Gao
a1feea7628 dts: add huiwei dts surpport
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-06-01 22:42:21 +08:00
Haaland Chen
2dec144313 riscv: dts: thead: update milkv meles for sdk v1.5.4
Signed-off-by: Haaland Chen <haaland@milkv.io>
2024-06-01 00:25:15 +08:00
Han Gao
72467de009 dts: meles: sync sdk 1.5.4
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-05-30 01:07:11 +08:00
Han Gao
76b3ac7dce trace_point: fix: move header file to events
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-05-30 01:07:11 +08:00
Han Gao
0bc9468e57 img: gpu: sync sdk 1.5.4
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-05-30 01:07:11 +08:00
Han Gao
15d74b941d vdec: 8000d: sync sdk 1.5.4
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-05-30 01:07:11 +08:00
Han Gao
a7fac880e0 venc: 8000e: sync sdk 1.5.4
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-05-30 01:07:11 +08:00
Han Gao
7053584b25 ddr-pmu: sync sdk 1.5.4
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-05-30 01:07:11 +08:00
Han Gao
b77432028f fix: remove trace include path for nna
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-05-30 01:07:11 +08:00
Han Gao
e0da9d9718 nna: sync SDK 1.5.4
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-05-30 01:07:11 +08:00
Han Gao
f06f585cf1 fix: remove th1520-b-dsi
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-05-30 01:07:11 +08:00
Han Gao
a1bca3a513 sync: sync 7210&8156 code
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-05-30 01:07:11 +08:00
thead_admin
7563179071 Linux_SDK_V1.5.4
Signed-off-by: thead_admin <occ_thead@service.alibaba.com>
2024-05-30 01:07:11 +08:00
Icenowy Zheng
89d6663712 add orientation of lichee console 4a panel
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2024-04-13 07:42:21 -05:00
Han Gao
7f7fc491ac feat: trans EXPORT_SYMBOL_NS{_GPL}(*, ANDROID_GKI_VFS_EXPORT_ONLY) to EXPORT_SYMBOL{_GPL}(*)
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-04-03 12:27:32 -05:00
Han Gao
9e89f40c76 feat: remove ANDROID_GKI_VFS_EXPORT_ONLY for all
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-04-03 12:27:32 -05:00
Han Gao
58b9ba8b4d feat: remove VFS_internal_I_am_really_a_filesystem_and_am_NOT_a_driver for all
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-04-03 12:27:32 -05:00
Han Gao
e15402b7ab chore: use none for deb compress
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-04-03 11:09:47 -05:00
Han Gao/Revy/Rabenda
bbf24fc7fa chore: in riscv64 force use -j32
Signed-off-by: Han Gao/Revy/Rabenda <gaohan@iscas.ac.cn>
2024-04-03 11:09:47 -05:00
Han Gao/Revy/Rabenda
2030eb1b71 chore: cleanup install step
Signed-off-by: Han Gao/Revy/Rabenda <gaohan@iscas.ac.cn>
2024-04-03 11:09:47 -05:00
Han Gao/Revy/Rabenda
bc4c98ebd7 feat: use revyos-kernel-builder for build
Signed-off-by: Han Gao/Revy/Rabenda <gaohan@iscas.ac.cn>
2024-04-03 11:09:47 -05:00
Han Gao/Revy/Rabenda
1b0b255060 chore: rename perf-thead to perf-vendor-th1520
Signed-off-by: Han Gao/Revy/Rabenda <gaohan@iscas.ac.cn>
2024-04-03 11:09:47 -05:00
Han Gao/Revy/Rabenda
8b9aa1faa1 chore: modify deb package version
Signed-off-by: Han Gao/Revy/Rabenda <gaohan@iscas.ac.cn>
2024-04-03 11:09:47 -05:00
Han Gao/Revy/Rabenda
aee62929de feat: enable riscv64 native build
Signed-off-by: Han Gao/Revy/Rabenda <gaohan@iscas.ac.cn>
2024-04-03 11:09:47 -05:00
Han Gao/Revy/Rabenda
3478bb910d chore: add localversion=th1520
Signed-off-by: Han Gao/Revy/Rabenda <gaohan@iscas.ac.cn>
2024-04-03 11:09:47 -05:00
Han Gao/Revy/Rabenda
e95535c32a ci: cleanup board martix
Signed-off-by: Han Gao/Revy/Rabenda <gaohan@iscas.ac.cn>
2024-04-03 11:09:47 -05:00
Icenowy Zheng
90bcc90cb8 drm/verisilicon: add format_mod_supported to plane
Otherwise IN_FORMATS blob is corrupted.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2024-04-02 02:49:08 -05:00
Lu Hui
833d4accd7 arch: riscv: dts: thead: th1520-lpi4a: change dc-charger pin, add compatible field 2024-04-01 04:41:33 -05:00
Haaland Chen
fa953236e1 scripts: add more options like -@ to build dtbo
It fixes the issue that u-boot failed to load dtbo like this:

  Retrieving file: /dtbs/linux-image-5.10.113-lpi4a/thead/overlays/meles-wifibt-external-antenna.dtbo
  715 bytes read in 4 ms (173.8 KiB/s)
  failed on fdt_overlay_apply(): FDT_ERR_NOTFOUND
  base fdt does did not have a /__symbols__ node
  make sure you've compiled with -@
  Failed to apply overlay /dtbs/linux-image-5.10.113-lpi4a/thead/overlays/meles-wifibt-external-antenna.dtbo, skipping
  ERROR: Did not find a cmdline Flattened Device Tree
     Loading Ramdisk to 1fa22000, end 1ffff820 ... OK
  Device tree not found or missing FDT support
  ### ERROR ### Please RESET the board ###

Signed-off-by: Haaland Chen <haaland@milkv.io>
2024-03-27 04:06:20 -05:00
Haaland Chen
71b7c456fa arch: riscv: thead: add antenna selection for Meles
Signed-off-by: Haaland Chen <haaland@milkv.io>
2024-03-27 04:06:20 -05:00
Haaland Chen
84b184c6c3 revyos_defconfig: enable CONFIG_INPUT_JOYDEV
Signed-off-by: Haaland Chen <haaland@milkv.io>
2024-03-27 04:06:20 -05:00
Haaland Chen
1223f3c597 riscv: dts: thead: meles: add usb power enable pin
Signed-off-by: Haaland Chen <haaland@milkv.io>
2024-03-27 04:06:20 -05:00
Haaland Chen
1881bc9051 riscv: dts: thead: meles: rename regulator-usb-select node
Signed-off-by: Haaland Chen <haaland@milkv.io>
2024-03-27 04:06:20 -05:00
Haaland Chen
a86c91b80b revyos_defconfig: enable LED Trigger
Signed-off-by: Haaland Chen <haaland@milkv.io>
2024-03-27 04:06:20 -05:00
Han Gao
b65595ebbc feat: add ddr-pmu module
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-03-24 07:13:39 -05:00
Han Gao
c6d4e5df18 fix: ethernet: dwmac-light: resovled hibernate
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-03-15 07:11:36 -05:00
Han Gao
931828f822 ci: update: use latest toolchains
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-03-07 00:53:16 -06:00
Han Gao
a637afb34d sync: gpu_bxm_4_64-kernel: Linux_SDK_V1.4.2
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-03-06 23:00:07 -06:00
Han Gao
6563ff55d9 sync: vpu-vc8000e-kernel: Linux_SDK_V1.4.2
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-03-06 23:00:07 -06:00
Han Gao
a3383ac8be sync: vpu-vc8000e-kernel: Linux_SDK_V1.3.3
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-03-06 23:00:07 -06:00
Han Gao
0808b41c96 sync: vpu-vc8000e-kernel: Linux_SDK_V1.2.1
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-03-06 23:00:07 -06:00
Han Gao
dda416a8b2 revert: vc8000e: support mmap in fops
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-03-06 23:00:07 -06:00
Han Gao
618138e424 sync: vpu-vc8000d-kernel: Linux_SDK_V1.4.2
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-03-06 23:00:07 -06:00
Han Gao
82c0c62303 sync: vpu-vc8000d-kernel: Linux_SDK_V1.3.3
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-03-06 23:00:07 -06:00
Han Gao
061f7f8738 sync: vpu-vc8000d-kernel: Linux_SDK_V1.2.1
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-03-06 23:00:07 -06:00
Han Gao
1f1380d124 fix: nna: use VHA_THEAD_LIGHT instead of THEAD_LIGHT_FPGA_C910
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-03-06 23:00:07 -06:00
Han Gao
c75d368ffa sync: configs: enable PM_DEVFREQ
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-03-06 23:00:07 -06:00
Han Gao
7989ccb780 sync: npu: ax3386 sdk 1.4.2
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-03-06 23:00:07 -06:00
Han Gao
bcb9ecc2c3 sync: npu: ax3386 sdk 1.3.3
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-03-06 23:00:07 -06:00
NekoRouter
3eee2bf4d2 riscv: dts: light: milkv meles: add mipi display and touch 2024-02-29 08:48:41 -06:00
Haaland Chen
6b9b37135d revyos_defconfig: enable CONFIG_DRM_PANEL_ORISETECH_OTA7290B
Signed-off-by: Haaland Chen <haaland@milkv.io>
2024-02-29 08:48:41 -06:00
Haaland Chen
93bec7933c drm: panel: Add Orise Technology ota7290b dsi panel
Signed-off-by: Haaland Chen <haaland@milkv.io>
2024-02-29 08:48:41 -06:00
NekoRouter
6f712a1d7f temp fix: disable poweron pin for aic8800 to make it work 2024-02-18 22:26:45 +08:00
NekoRouter
40d4663361 Clean dts for console: remove warnings when build dtb 2024-02-18 22:26:45 +08:00
Han Gao
9443deb7d4 Revert "fix: enable usb_uas for high speed"
This reverts commit 384c5e9e27.
2024-02-08 20:01:40 +08:00
Lu Hui
ffab133a52 drivers: input: touchscreen: goodix: add read config retry 2024-02-08 19:45:39 +08:00
Lu Hui
8c67a7d26b dts: lpi4a-laptop: remove gt9xx xmax & ymax 2024-02-08 19:45:39 +08:00
Han Gao
384c5e9e27 fix: enable usb_uas for high speed
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-01-31 22:09:29 +08:00
huaming.jiang
1d7ed6a0c6 lpi4a add wakeup gpio key and usb resume fix
Change-Id: I0479ed6cd676af7ad087968e1bb22f2b04e89337
2024-01-31 22:09:29 +08:00
Han Gao
a546653719 compat: add mainline dtb name
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-01-31 22:09:29 +08:00
Han Gao
2ab5512161 feat: configs: support suspend & hibernation
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-01-31 22:09:29 +08:00
Han Gao
05c3f803b9 compat: add old dtb name
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-01-31 22:09:29 +08:00
Han Gao
a6630353d8 sync: sync config for revyos
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-01-31 22:09:29 +08:00
Han Gao
11046edaf7 fix: revert dpu_enc0 for build
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-01-31 22:09:29 +08:00
Han Gao
a695d43115 dts: rename th1520
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2024-01-31 22:09:29 +08:00
thead_admin
d4c68ef2c1 Linux_SDK_V1.4.2
Signed-off-by: thead_admin <occ_thead@service.alibaba.com>
2024-01-31 22:09:29 +08:00
thead_admin
e17ac7bab2 Linux_SDK_V1.3.3
Signed-off-by: thead_admin <occ_thead@service.alibaba.com>
2024-01-31 22:09:29 +08:00
Han Gao
2bd2eac4a7 ci: add pahole
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-12-30 20:18:05 +08:00
Han Gao
6a61ffb0b6 config: enable bpf for bpfcc & bpftrace
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-12-30 20:18:05 +08:00
Icenowy Zheng
6bb5a30b0e drm/verisilicon: bias fb address for dual-head offset
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-12-29 21:30:20 +08:00
Han Gao
6bafa84231 config: network: enable brcmfmac
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-12-27 22:38:48 +08:00
Icenowy Zheng
593e484dbb drm/verisilicon: finally fix the cursor position
Fixes cursor disappearing when using rotated screen.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-12-27 22:36:59 +08:00
Icenowy Zheng
108fcf335e riscv: dts: thead: downclock SD card for LPi4A
It's reported that @198MHz some R/W error will happen.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-12-27 22:36:46 +08:00
Han Gao
5441a6d3e1 config: network: wg & team & bonding
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-12-27 22:36:30 +08:00
Lu Hui
117a49c9b2 riscv: dts: light-lpi4a-z14inch-m0: add 14inch screen support 2023-12-26 16:29:43 +08:00
Lu Hui
ceed3702cd drivers: panel: add 14inch-2160x1440_40Hz screen timing into simple-panel.c 2023-12-26 16:29:43 +08:00
Lu Hui
274a4b08dd sound: es8156 limit max volume 2023-12-26 16:29:43 +08:00
Lu Hui
2c9ad71844 revyos_defconfig: disable sysrq from serial port 2023-12-26 16:29:43 +08:00
Lu Hui
fa040f74fb revyos_defconfig: enable hid over i2c driver 2023-12-26 16:29:43 +08:00
Lu Hui
37075d067b riscv: dts: light-lpi4a-console: add ydx trackpoint, thank ice 2023-12-26 16:29:43 +08:00
Lu Hui
14763fe34c revyos_defconfig: enable cw2015 battery & gpio charger 2023-12-26 16:29:43 +08:00
Lu Hui
3c3d82b1e9 revyos_defconfig: enable panel-bridge lt8911exb 2023-12-26 16:29:43 +08:00
Lu Hui
633d39c11d revyos_defconfig: enable panel-minjun 2023-12-26 16:29:43 +08:00
Lu Hui
25fc785ecc riscv: dts: add light-lpi4a-[laptop|console|z14inch-m0].dts 2023-12-26 16:29:43 +08:00
Lu Hui
d49c77423a revyos_defconfig: enable framebuffer console rotate 2023-12-26 16:29:43 +08:00
Lu Hui
31b8e1e375 riscv: dts: light-lpi4a-dsi0-hdmi: allow panel ref by other dts file 2023-12-26 16:29:43 +08:00
Lu Hui
3a6df042b4 drivers: panel-bridge: add lt8911exb driver 2023-12-26 16:29:43 +08:00
Lu Hui
f32b30324f drivers: panel: add mingjun-070bi30ia2 2023-12-26 16:29:43 +08:00
Lu Hui
1fd93bc1a9 drivers: aic8800: upgrade to 20231212 2023-12-26 16:29:43 +08:00
Icenowy Zheng
b8c5d35460 revyos_defconfig: use ETNAVIV instead of Galcore
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-12-08 11:24:07 +08:00
Icenowy Zheng
afcdc418d4 drm/etnaviv: hack: use only pta id 0
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-12-08 11:24:07 +08:00
Icenowy Zheng
d6f09caa32 light: use etnaviv
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-12-08 11:24:07 +08:00
Icenowy Zheng
727e6f3be6 galcore: adapt to vivante,gc
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-12-08 11:24:07 +08:00
Icenowy Zheng
2f78e6b748 drm/etnaviv: add GC620
Dirty.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-12-08 11:24:07 +08:00
Icenowy Zheng
cfe4413691 drm/etnaviv: add hwdb entry for TH1520 GC620
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-12-08 11:24:07 +08:00
Icenowy Zheng
373e8161c5 drm/etnaviv: add workaround for GC620 on TH1520 (0x5552)
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-12-08 11:24:07 +08:00
Icenowy Zheng
9ba56a64a8 drm/etnaviv: add handle for GPUs with only SECURITY_AHB flag
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-12-08 11:24:07 +08:00
Lucas Stach
ad542ee013 drm/etnaviv: expedited MMU fault handling
The GPU is halted when it hits a MMU exception, so there is no point in
waiting for the job timeout to expire or try to work out if the GPU is
still making progress in the timeout handler, as we know that the GPU
won't make any more progress.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
2023-12-08 11:24:07 +08:00
Lucas Stach
e44f708a9e drm/etnaviv: drop GPU initialized property
Now that it is only used to track the driver internal state of
the MMU global and cmdbuf objects, we can get rid of this property
by making the free/finit functions of those objects safe to call
on an uninitialized object.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
2023-12-08 11:24:07 +08:00
Lucas Stach
ccbbd8ae8f drm/etnaviv: better track GPU state
Instead of only tracking if the FE is running, use a enum to better
describe the various states the GPU can be in. This allows some
additional validation to make sure that functions that expect a
certain GPU state are only called when the GPU is actually in that
state.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
2023-12-08 11:24:07 +08:00
Lucas Stach
e286235a75 drm/etnaviv: avoid runtime PM usage in etnaviv_gpu_bind
Nothing in this callpath actually touches the GPU, so there is no reason
to get it out of suspend state here. Only if runtime PM isn't enabled at
all we must make sure to enable the clocks, so the GPU init routine can
access the GPU later on.

This also removes the need to guard against the state where the driver
isn't fully initialized yet in the runtime PM resume handler.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
2023-12-08 11:24:07 +08:00
Lucas Stach
e084b32587 drm/etnaviv: slow down FE idle polling
Currently the FE is spinning way too fast when polling for new work in
the FE idleloop. As each poll fetches 16 bytes from memory, a GPU running
at 1GHz with the current setting of 200 wait cycle between fetches causes
80 MB/s of memory traffic just to check for new work when the GPU is
otherwise idle, which is more FE traffic than in some GPU loaded cases.

Significantly increase the number of wait cycles to slow down the poll
interval to ~30µs, limiting the FE idle memory traffic to 512 KB/s, while
providing a max latency which should not hurt most use-cases. The FE WAIT
command seems to have some unknown discrete steps in the wait cycles so
we may over/undershoot the target a bit, but that should be harmless.

If the GPU core base frequency is unknown keep the 200 wait cycles as
a sane default.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
2023-12-08 11:24:07 +08:00
Lucas Stach
880ab177a1 drm/etnaviv: split fence lock
The fence lock currently protects two distinct things. It protects the fence
IDR from concurrent inserts and removes and also keeps drm_sched_job_arm and
drm_sched_entity_push_job in one atomic section to guarantee the fence seqno
monotonicity. Split the lock into those two functions.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
2023-12-08 11:24:07 +08:00
Christian Gmeiner
c32beb855f drm/etnaviv: print MMU exception cause
The MMU tells us the fault status. While the raw register value is
already printed, it's a bit more user friendly to translate the
fault reasons into human readable format.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2023-12-08 11:24:07 +08:00
Lucas Stach
8304fb3b0e drm/etnaviv: switch to PFN mappings
There is no reason to use page based mappings, as the established
mappings are special driver mappings anyways and should not be
handled like normal pages.

Be consistent with what other drivers do and use raw PFN based
mappings.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2023-12-08 11:24:07 +08:00
Lucas Stach
51464f6592 drm/etnaviv: reap idle mapping if it doesn't match the softpin address
When a idle BO, which is held open by another process, gets freed by
userspace and subsequently referenced again by e.g. importing it again,
userspace may assign a different softpin VA than the last time around.
As the kernel GEM object still exists, we likely have a idle mapping
with the old VA still cached, if it hasn't been reaped in the meantime.

As the context matches, we then simply try to resurrect this mapping by
increasing the refcount. As the VA in this mapping does not match the
new softpin address, we consequently fail the otherwise valid submit.
Instead of failing, reap the idle mapping.

Cc: stable@vger.kernel.org # 5.19
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
2023-12-08 11:24:07 +08:00
Lucas Stach
f87b29df53 drm/etnaviv: move idle mapping reaping into separate function
The same logic is already used in two different places and now
it will also be needed outside of the compilation unit, so split
it into a separate function.

Cc: stable@vger.kernel.org # 5.19
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
2023-12-08 11:24:07 +08:00
Christian Gmeiner
c71d194901 drm/etnaviv: print offender task information on hangcheck recovery
Track the pid per submit, so we can print the name and cmdline of
the task which submitted the batch that caused the gpu to hang.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2023-12-08 11:24:07 +08:00
Lucas Stach
dc96c0fe68 drm/etnaviv: reap idle softpin mappings when necessary
Right now the only point where softpin mappings get removed from the
MMU context is when the mapped GEM object is destroyed. However,
userspace might want to reuse that address space before the object
is destroyed, which is a valid usage, as long as all mapping in that
region of the address space are no longer used by any GPU jobs.

Implement reaping of idle MMU mappings that would otherwise
prevent the insertion of a softpin mapping.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Guido Günther <agx@sigxcpu.org>
Acked-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2023-12-08 11:24:07 +08:00
Lucas Stach
5ffd7f5029 drm/etnaviv: move flush_seq increment into etnaviv_iommu_map/unmap
The flush sequence is a marker that the page tables have been changed
and any affected TLBs need to be flushed. Move the flush_seq increment
a little further down the call stack to place it next to the actual
page table manipulation. Not functional change.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Guido Günther <agx@sigxcpu.org>
Acked-by: Guido Günther <agx@sigxcpu.org>
2023-12-08 11:24:07 +08:00
Lucas Stach
0f89c7db16 drm/etnaviv: move MMU context ref/unref into map/unmap_gem
This makes it a little more clear that the mapping holds a reference
to the context once the buffer has been successfully mapped into that
context and simplifies the error handling a bit.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Guido Günther <agx@sigxcpu.org>
Acked-by: Guido Günther <agx@sigxcpu.org>
2023-12-08 11:24:07 +08:00
Michael Walle
4a4a708db1 drm/etnaviv: use a 32 bit mask as coherent DMA mask
The STLB and the first command buffer (which is used to set up the TLBs)
has a 32 bit size restriction in hardware. There seems to be no way to
specify addresses larger than 32 bit. Keep it simple and restict the
addresses to the lower 4 GiB range for all coherent DMA memory
allocations.

Please note, that platform_device_alloc() will initialize dev->dma_mask
to point to pdev->platform_dma_mask, thus dma_set_mask() will work as
expected.

While at it, move the dma_mask setup code to the of_dma_configure() to
keep all the DMA setup code next to each other.

Suggested-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2023-12-08 11:24:07 +08:00
Christian Gmeiner
255c988024 drm/etnaviv: provide more ID values via GET_PARAM ioctl.
Make it possible for the user space to access these ID values.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2023-12-08 11:24:07 +08:00
Guido Günther
af2602ac87 drm/etnaviv: Add lockdep annotations for context lock
etnaviv_iommu_find_iova has it so etnaviv_iommu_insert_exact and
lockdep_assert_held should have it as well.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2023-12-08 11:24:07 +08:00
Lucas Stach
b6d74c3560 drm/etnaviv: fix dumping of active MMU context
[ Upstream commit 20faf2005ec85fa1a6acc9a74ff27de667f90576 ]

gpu->mmu_context is the MMU context of the last job in the HW queue, which
isn't necessarily the same as the context from the bad job. Dump the MMU
context from the scheduler determined bad submit to make it work as intended.

Fixes: 17e4660ae3d7 ("drm/etnaviv: implement per-process address spaces on MMUv2")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-08 11:24:07 +08:00
Lucas Stach
8f3347a598 drm/etnaviv: fix reference leak when mmaping imported buffer
commit 963b2e8c428f79489ceeb058e8314554ec9cbe6f upstream.

drm_gem_prime_mmap() takes a reference on the GEM object, but before that
drm_gem_mmap_obj() already takes a reference, which will be leaked as only
one reference is dropped when the mapping is closed. Drop the extra
reference when dma_buf_mmap() succeeds.

Cc: stable@vger.kernel.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 11:24:07 +08:00
Lucas Stach
9aa4002cc9 drm/etnaviv: don't truncate physical page address
[ Upstream commit d37c120b73128690434cc093952439eef9d56af1 ]

While the interface for the MMU mapping takes phys_addr_t to hold a
full 64bit address when necessary and MMUv2 is able to map physical
addresses with up to 40bit, etnaviv_iommu_map() truncates the address
to 32bits. Fix this by using the correct type.

Fixes: 931e97f3afd8 ("drm/etnaviv: mmuv2: support 40 bit phys address")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-08 11:24:07 +08:00
Doug Brown
e025348004 drm/etnaviv: add missing quirks for GC300
[ Upstream commit cc7d3fb446a91f24978a6aa59cbb578f92e22242 ]

The GC300's features register doesn't specify that a 2D pipe is
available, and like the GC600, its idle register reports zero bits where
modules aren't present.

Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-08 11:24:07 +08:00
Lucas Stach
58f804da14 drm/etnaviv: check for reaped mapping in etnaviv_iommu_unmap_gem
commit e168c25526cd0368af098095c2ded4a008007e1b upstream.

When the mapping is already reaped the unmap must be a no-op, as we
would otherwise try to remove the mapping twice, corrupting the involved
data structures.

Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Guido Günther <agx@sigxcpu.org>
Acked-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 11:24:07 +08:00
Thomas Zimmermann
277f5bc2bc drm/etnaviv: Introduce GEM object functions
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in etnaviv. The only exception is gem_prime_mmap,
which is non-trivial to convert.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-4-tzimmermann@suse.de
2023-12-08 11:24:07 +08:00
Lucas Stach
2dc08a7dac drm/etnaviv: rework linear window offset calculation
The current calculation based on the required_dma mask can be significantly
off, so that the linear window only overlaps a small part of the DRAM
address space. This can lead to the command buffer being unmappable, which
is obviously bad.

Rework the linear window offset calculation to be based on the command buffer
physical address, making sure that the command buffer is always mappable.

Tested-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2023-12-08 11:24:07 +08:00
Icenowy Zheng
05735e9ff4 drm/verisilicon: fix cursor position
The cursor should be placed at (x + hot_x, y + hot_y) to allow partial
display of a cursor.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-12-05 23:38:42 +08:00
Han Gao
d81a2398a8 nf: enable nf mangle
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-12-03 15:33:55 +08:00
Han Gao
e133903e4d meles: add 4g/8g dts
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-12-03 14:53:53 +08:00
Han Gao
8b4bca072c meles: fix: usb2.0
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-12-03 14:53:53 +08:00
Haaland Chen
026ae08e53 riscv: dts: light: add Milk-V Meles board
Signed-off-by: Haaland Chen <haaland@milkv.io>
2023-12-03 14:53:53 +08:00
Han Gao
95a545985b riscv: default enable xtheadc
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-11-29 23:46:21 +08:00
Han Gao
f722795a38 toolchains: fix mainline toolchain build
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-11-29 23:46:21 +08:00
Han Gao
06bd593cfd ci: kernel auto build on thead-gcc & mainline-gcc
thead-gcc: v2.8.0
mainline-gcc: v13.2

Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-11-29 23:46:21 +08:00
Jisheng Zhang
556f057aca riscv: cmpxchg: implement arch_cmpxchg64_{relaxed|acquire|release}
After selecting ARCH_USE_CMPXCHG_LOCKREF, one straight futher
optimization is implementing the arch_cmpxchg64_relaxed() because the
lockref code does not need the cmpxchg to have barrier semantics. At
the same time, implement arch_cmpxchg64_acquire and
arch_cmpxchg64_release as well.

However, on both TH1520 and JH7110 platforms, I didn't see obvious
performance improvement with Linus' test case [1]. IMHO, this may
be related with the fence and lr.d/sc.d hw implementations. In theory,
lr/sc without fence could give performance improvement over lr/sc plus
fence, so add the code here to leave performance improvement room on
newer HW platforms.

Link: http://marc.info/?l=linux-fsdevel&m=137782380714721&w=4 [1]
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
2023-11-29 23:46:21 +08:00
Jisheng Zhang
186355454e riscv: select ARCH_USE_CMPXCHG_LOCKREF
Select ARCH_USE_CMPXCHG_LOCKREF to enable the cmpxchg-based lockless lockref
implementation for riscv.

Using Linus' test case[1] on TH1520 platform, I see a 11.2% improvement.
On JH7110 platform, I see 12.0% improvement.

Link: http://marc.info/?l=linux-fsdevel&m=137782380714721&w=4 [1]
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
2023-11-29 23:46:21 +08:00
Jisheng Zhang
b25b9b6b16 riscv: select ARCH_HAS_FAST_MULTIPLIER
Currently, riscv linux requires at least IMA, so all platforms have a
multiplier. And I assume the 'mul' efficiency is comparable or better
than a sequence of five or so register-dependent arithmetic
instructions. Select ARCH_HAS_FAST_MULTIPLIER to get slightly nicer
codegen. Refer to commit f9b4192923fa ("[PATCH] bitops: hweight()
speedup") for more details.

In a simple benchmark test calling hweight64() in a loop, it got:
about 14% preformance improvement on JH7110, tested on Milkv Mars.

about 23% performance improvement on TH1520 and SG2042, tested on
Sipeed LPI4A and SG2042 platform.

a slight performance drop on CV1800B, tested on milkv duo. Among all
riscv platforms in my hands, this is the only one which sees a slight
performance drop. It means the 'mul' isn't quick enough. However, the
situation exists on x86 too, for example, P4 doesn't have fast
integer multiplies as said in the above commit, x86 also selects
ARCH_HAS_FAST_MULTIPLIER. So let's select ARCH_HAS_FAST_MULTIPLIER
which can benefit almost riscv platforms.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
2023-11-29 23:46:21 +08:00
Icenowy Zheng
35a32afaf8 Kernel: fix out-of-tree build for merged kernel modules
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-11-29 12:54:48 +08:00
NekoRouter
3e042d29a3 Re-disable pwm,qspi0,qspi1 on beagle board
Keep light-a and beagle both can work
2023-10-22 21:04:53 -05:00
NekoRouter
c32ad7b836 Revert "sync: device-tree changes from main repo"
Enable pwm, qspi0, qspi1 on all devices

This reverts partial of commit 40ef3b0976
2023-10-22 21:04:53 -05:00
NekoRouter
99a459c9f7 Add MIPI panel driver, MIPI panel and touch controller Kconfig, New devicetree file 2023-10-22 21:04:53 -05:00
Han Gao
c10fdb081d feat: update npu-ax3386 with sdk1.2.1
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-10-18 22:16:33 +08:00
Han Gao
e3b22dbe54 ci: use revyos_beaglev_defconfig for ahead & cleanup
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-10-10 14:46:45 -05:00
Han Gao
b9526ccc12 config: use separate revyos_beaglev_defconfig
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-10-10 14:46:45 -05:00
Han Gao
f05fed4b3a Revert "fix: temporarily turn off Bluetooth build for ahead"
Use separate config

This reverts commit fe82c45483.
2023-10-10 14:46:45 -05:00
Han Gao
3e8db613d4 fix: reduce log level for aic8800
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-10-10 13:38:16 -05:00
Lu Hui
e04af8ab30 revyos_defconfig: enable aic8800 wifi 2023-10-10 13:38:16 -05:00
Lu Hui
a29e54cb02 drivers: wireless: add aic8800 support 2023-10-10 13:38:16 -05:00
Han Gao
fe82c45483 fix: temporarily turn off Bluetooth build for ahead
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-10-10 16:24:12 +08:00
Han Gao
c64537c234 fix: fix ftbfs for openwrt
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-10-09 15:46:44 -05:00
Han Gao
e0b5c2d836 Revert "Fix DSI"
This reverts commit c37f2020a7fe989eedec6edfc30c6ff1888a1bcf.
2023-10-09 15:46:44 -05:00
Han Gao
65d28e339c chore: force CONFIG_LOCALVERSION_AUTO=n
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-10-09 15:46:44 -05:00
Han Gao
383394d925 chore: sync revyos_config for sdk 1.2.0
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-10-09 15:46:44 -05:00
Han Gao
76d072714b fix: sync beagle devicetree
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-10-09 15:46:44 -05:00
Han Gao
f107c010f0 chore: sync revyos_config
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-10-09 15:46:44 -05:00
Robert Nelson
21488b4bba BeagleV: remove uart4 configuration and leave it to u-boot
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:46:44 -05:00
Robert Nelson
4090089096 NFM: quiet: hub usb usb2-port1
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:46:44 -05:00
Deepak Khatri
48d0bea232 Fix DSI 2023-10-09 15:46:44 -05:00
Deepak Khatri
0f0b0abd92 Free up P8.12 2023-10-09 15:46:44 -05:00
Deepak Khatri
2864ff8827 Free up P8.08 & P8.09 2023-10-09 15:46:44 -05:00
Robert Nelson
3b1e9db0d7 Make sure to build overlays
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:46:44 -05:00
Robert Nelson
d7048c221b BeagleV: add overlays
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:46:44 -05:00
Robert Nelson
d92a0f15a5 config: switch from /usr/lib/ -> /lib/ for wifi
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:46:44 -05:00
Robert Nelson
e4706a16f3 sync: Fix gpio pins input issue
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:46:44 -05:00
Robert Nelson
34157258d7 dt: merge in BlueTooth pinmux changes
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:46:44 -05:00
Robert Nelson
825f6a577e dt: sync MB_CS
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:46:44 -05:00
Robert Nelson
f0fba63d97 merge: dt: add cape header pins
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:46:44 -05:00
Robert Nelson
790c65208f light-beagle-ref.dts: rename board
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:46:44 -05:00
Robert Nelson
4f4ed3f042 light-beagle: disable mipi, then hdmi just works
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:46:44 -05:00
Robert Nelson
4d4f6ba338 ToolChain: switch to something we can download with wget
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:46:44 -05:00
Robert Nelson
40ef3b0976 sync: device-tree changes from main repo
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:46:44 -05:00
Robert Nelson
921113dc1d config: sync config
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:46:44 -05:00
Robert Nelson
296d3dc80c config: enable a suite of generic drivers
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:46:44 -05:00
Robert Nelson
d592c8d305 config: sync filesystem options
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:46:44 -05:00
Robert Nelson
8d34c4a386 config: SECURITY profile
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:46:44 -05:00
Robert Nelson
2360026a43 config: enable MODULE_COMPRESS_XZ
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:39:45 -05:00
Robert Nelson
dd0b44d681 config: sync debian networking stack
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:39:45 -05:00
Robert Nelson
3366ec3f14 config: enable leds support
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:39:45 -05:00
Robert Nelson
c2bb75e485 riscv: support Overlay Buildling
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:39:45 -05:00
Han Gao
a854067698 chore: remove compress
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-10-09 15:33:03 -05:00
Han Gao
580ea36ab7 chore: add ci for ahead
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-10-09 15:33:03 -05:00
Robert Nelson
2fac2fed77 config: add our default gadget loading configuration
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:33:03 -05:00
Robert Nelson
ac080f0f32 config: add docker.io defaults
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:33:03 -05:00
Robert Nelson
22994ee8fd config: disable CONFIG_DEBUG_INFO/CONFIG_RUNTIME_TESTING_MENU
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:33:03 -05:00
Robert Nelson
dd5c99c459 Add_Eth_Phy_and_Wifi_Ble_driver_for_BeagleV_board
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:33:03 -05:00
Robert Nelson
798c6e25dc BeagleV: copy light_defconfig as beaglev_defconfig
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2023-10-09 15:33:03 -05:00
Han Gao
ed4a257bd1 fix: cluster mask reg_usb_hub_vcc5v gpio
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
2023-10-10 03:20:28 +08:00
1747 changed files with 1509526 additions and 27605 deletions

View File

@@ -8,10 +8,17 @@ on:
- cron: "0 2 * * *"
env:
xuetie_toolchain: https://occ-oss-prod.oss-cn-hangzhou.aliyuncs.com/resource//1663142514282
toolchain_file_name: Xuantie-900-gcc-linux-5.10.4-glibc-x86_64-V2.6.1-20220906.tar.gz
xuantie_toolchain: https://occ-oss-prod.oss-cn-hangzhou.aliyuncs.com/resource//1705395627867
toolchain_file_name: Xuantie-900-gcc-linux-5.10.4-glibc-x86_64-V2.8.1-20240115.tar.gz
mainline_toolchain: https://github.com/riscv-collab/riscv-gnu-toolchain/releases/download/2024.03.01
mainline_toolchain_file_name: riscv64-glibc-ubuntu-22.04-gcc-nightly-2024.03.01-nightly.tar.gz
wget_alias: 'wget --retry-connrefused --waitretry=1 --read-timeout=20 --timeout=15 -t 0'
ARCH: riscv
board: lpi4a
board: yocto-standard
KBUILD_BUILD_USER: builder
KBUILD_BUILD_HOST: revyos-riscv-builder
KDEB_COMPRESS: none
KDEB_CHANGELOG_DIST: unstable
jobs:
kernel:
@@ -19,85 +26,72 @@ jobs:
fail-fast: false
matrix:
include:
- name: gcc-13
cross: riscv64-unknown-linux-gnu-
machine: ubuntu-22.04
run_image: ghcr.io/revyos/revyos-kernel-builder:amd64-2024.04.02
- name: thead-gcc
toolchain_tripe: riscv64-unknown-linux-gnu-
- name: gcc-12
toolchain_tripe: riscv64-linux-gnu-
cross: riscv64-unknown-linux-gnu-
machine: ubuntu-22.04
run_image: ghcr.io/revyos/revyos-kernel-builder:amd64-2024.04.02
- name: native
cross: riscv64-linux-gnu-
machine: [ self-hosted, Linux, riscv64 ]
run_image: ghcr.io/revyos/revyos-kernel-builder:riscv64-2024.04.02
runs-on: ubuntu-22.04
runs-on: ${{ matrix.machine }}
container:
image: ${{ matrix.run_image }}
env:
CROSS_COMPILE: ${{ matrix.toolchain_tripe }}
CROSS_COMPILE: ${{ matrix.cross }}
steps:
- name: Install software
run: |
sudo apt update && \
sudo apt install -y gdisk dosfstools g++-12-riscv64-linux-gnu build-essential \
libncurses-dev gawk flex bison openssl libssl-dev tree \
dkms libelf-dev libudev-dev libpci-dev libiberty-dev autoconf device-tree-compiler \
devscripts
sudo update-alternatives --install \
/usr/bin/riscv64-linux-gnu-gcc riscv64-gcc /usr/bin/riscv64-linux-gnu-gcc-12 10
sudo update-alternatives --install \
/usr/bin/riscv64-linux-gnu-g++ riscv64-g++ /usr/bin/riscv64-linux-gnu-g++-12 10
- name: Checkout kernel
uses: actions/checkout@v3
uses: actions/checkout@v4
with:
path: 'kernel'
- name: Configure toolchains
run: |
mkdir rootfs && mkdir rootfs/boot
if [ x"${{ matrix.name }}" = x"thead-gcc" ]; then
wget ${xuetie_toolchain}/${toolchain_file_name}
tar -xvf ${toolchain_file_name} -C /opt
fi
- name: Compile Kernel && Install
run: |
export PATH="/opt/Xuantie-900-gcc-linux-5.10.4-glibc-x86_64-V2.6.1/bin:$PATH"
mkdir -p rootfs
if [[ ${{ matrix.name }} = "thead-gcc" ]]; then
${wget_alias} ${xuantie_toolchain}/${toolchain_file_name}
tar -xvf ${toolchain_file_name} -C /opt
export PATH="/opt/Xuantie-900-gcc-linux-5.10.4-glibc-x86_64-V2.8.1/bin:$PATH"
elif [[ ${{ matrix.name }} = "gcc-13" ]]; then
${wget_alias} ${mainline_toolchain}/${mainline_toolchain_file_name}
tar -xvf ${mainline_toolchain_file_name} -C /opt
export PATH="/opt/riscv/bin:$PATH"
else
echo "No download toolchain."
fi
${CROSS_COMPILE}gcc -v
pushd kernel
make revyos_defconfig
export KDEB_PKGVERSION="$(date "+%Y.%m.%d.%H.%M")+$(git rev-parse --short HEAD)"
if [ x"${{ matrix.name }}" = x"gcc-12" ]; then
echo "CONFIG_THEAD_ISA=n" >> .config
elif [ x"${{ matrix.name }}" = x"thead-gcc" ]; then
echo "CONFIG_THEAD_ISA=y" >> .config
export KDEB_PKGVERSION="$(make kernelversion)-$(date "+%Y.%m.%d.%H.%M")+$(git rev-parse --short HEAD)"
sed -i '/CONFIG_LOCALVERSION_AUTO/d' .config && echo "CONFIG_LOCALVERSION_AUTO=n" >> .config
cat .config | grep "CONFIG_THEAD_ISA"
if [ `uname -m` = "riscv64" ]; then
# FIXME: force use 32 thread
make -j32 bindeb-pkg LOCALVERSION="-${board}"
else
make -j$(nproc) bindeb-pkg LOCALVERSION="-${board}"
fi
make -j$(nproc) bindeb-pkg LOCALVERSION="-${board}"
make -j$(nproc) dtbs
# if [ x"$(cat .config | grep CONFIG_MODULES=y)" = x"CONFIG_MODULES=y" ]; then
# sudo make INSTALL_MOD_PATH=${GITHUB_WORKSPACE}/rootfs/ modules_install -j$(nproc)
# fi
# sudo make INSTALL_PATH=${GITHUB_WORKSPACE}/rootfs/boot install -j$(nproc)
# Copy deb
sudo dcmd cp -v ../*.changes ${GITHUB_WORKSPACE}/rootfs/
# build perf & install
# make LDFLAGS=-static NO_LIBELF=1 NO_JVMTI=1 VF=1 -C tools/perf/
# sudo mkdir -p ${GITHUB_WORKSPACE}/rootfs/sbin/
# sudo cp -v tools/perf/perf ${GITHUB_WORKSPACE}/rootfs/sbin/perf-thead
# Install Kernel
# sudo cp -v arch/riscv/boot/Image ${GITHUB_WORKSPACE}/rootfs/boot/
dcmd cp -v ../*.changes ${GITHUB_WORKSPACE}/rootfs/
# record commit-id
git rev-parse HEAD > kernel-commitid
sudo cp -v kernel-commitid ${GITHUB_WORKSPACE}/rootfs/boot/
cp -v kernel-commitid ${GITHUB_WORKSPACE}/rootfs/
# Install DTB
sudo cp -v arch/riscv/boot/dts/thead/{light-lpi4a.dtb,light-lpi4a-16gb.dtb} ${GITHUB_WORKSPACE}/rootfs/boot/
ls -al ${GITHUB_WORKSPACE}/rootfs/
popd
- name: compress
run: tar -zcvf thead-kernel-${{ matrix.name }}.tar.gz rootfs
- name: 'Upload Artifact'
uses: actions/upload-artifact@v3
uses: actions/upload-artifact@v4
with:
name: thead-kernel-${{ matrix.name }}.tar.gz
path: thead-kernel-${{ matrix.name }}.tar.gz
name: thead-kernel-${{ matrix.name }}
path: rootfs/*
retention-days: 30

1
.gitignore vendored
View File

@@ -18,6 +18,7 @@
*.c.[012]*.*
*.dt.yaml
*.dtb
*.dtbo
*.dtb.S
*.dwo
*.elf

View File

@@ -81,4 +81,4 @@ Example:
};
};
[1]. Documentation/devicetree/bindings/arm/idle-states.yaml
[1]. Documentation/devicetree/bindings/cpu/idle-states.yaml

View File

@@ -101,7 +101,7 @@ properties:
bindings in [1]) must specify this property.
[1] Kernel documentation - ARM idle states bindings
Documentation/devicetree/bindings/arm/idle-states.yaml
Documentation/devicetree/bindings/cpu/idle-states.yaml
patternProperties:
"^power-domain-":

View File

@@ -1,25 +1,30 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/arm/idle-states.yaml#
$id: http://devicetree.org/schemas/cpu/idle-states.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ARM idle states binding description
title: Idle states binding description
maintainers:
- Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
- Anup Patel <anup@brainfault.org>
description: |+
==========================================
1 - Introduction
==========================================
ARM systems contain HW capable of managing power consumption dynamically,
where cores can be put in different low-power states (ranging from simple wfi
to power gating) according to OS PM policies. The CPU states representing the
range of dynamic idle states that a processor can enter at run-time, can be
specified through device tree bindings representing the parameters required to
enter/exit specific idle states on a given processor.
ARM and RISC-V systems contain HW capable of managing power consumption
dynamically, where cores can be put in different low-power states (ranging
from simple wfi to power gating) according to OS PM policies. The CPU states
representing the range of dynamic idle states that a processor can enter at
run-time, can be specified through device tree bindings representing the
parameters required to enter/exit specific idle states on a given processor.
==========================================
2 - ARM idle states
==========================================
According to the Server Base System Architecture document (SBSA, [3]), the
power states an ARM CPU can be put into are identified by the following list:
@@ -43,8 +48,23 @@ description: |+
The device tree binding definition for ARM idle states is the subject of this
document.
==========================================
3 - RISC-V idle states
==========================================
On RISC-V systems, the HARTs (or CPUs) [6] can be put in platform specific
suspend (or idle) states (ranging from simple WFI, power gating, etc). The
RISC-V SBI v0.3 (or higher) [7] hart state management extension provides a
standard mechanism for OS to request HART state transitions.
The platform specific suspend (or idle) states of a hart can be either
retentive or non-rententive in nature. A retentive suspend state will
preserve HART registers and CSR values for all privilege modes whereas
a non-retentive suspend state will not preserve HART registers and CSR
values.
===========================================
2 - idle-states definitions
4 - idle-states definitions
===========================================
Idle states are characterized for a specific system through a set of
@@ -211,10 +231,10 @@ description: |+
properties specification that is the subject of the following sections.
===========================================
3 - idle-states node
5 - idle-states node
===========================================
ARM processor idle states are defined within the idle-states node, which is
The processor idle states are defined within the idle-states node, which is
a direct child of the cpus node [1] and provides a container where the
processor idle states, defined as device tree nodes, are listed.
@@ -223,7 +243,7 @@ description: |+
just supports idle_standby, an idle-states node is not required.
===========================================
4 - References
6 - References
===========================================
[1] ARM Linux Kernel documentation - CPUs bindings
@@ -238,9 +258,15 @@ description: |+
[4] ARM Architecture Reference Manuals
http://infocenter.arm.com/help/index.jsp
[6] ARM Linux Kernel documentation - Booting AArch64 Linux
[5] ARM Linux Kernel documentation - Booting AArch64 Linux
Documentation/arm64/booting.rst
[6] RISC-V Linux Kernel documentation - CPUs bindings
Documentation/devicetree/bindings/riscv/cpus.yaml
[7] RISC-V Supervisor Binary Interface (SBI)
http://github.com/riscv/riscv-sbi-doc/riscv-sbi.adoc
properties:
$nodename:
const: idle-states
@@ -253,7 +279,7 @@ properties:
On ARM 32-bit systems this property is optional
This assumes that the "enable-method" property is set to "psci" in the cpu
node[6] that is responsible for setting up CPU idle management in the OS
node[5] that is responsible for setting up CPU idle management in the OS
implementation.
const: psci
@@ -265,8 +291,8 @@ patternProperties:
as follows.
The idle state entered by executing the wfi instruction (idle_standby
SBSA,[3][4]) is considered standard on all ARM platforms and therefore
must not be listed.
SBSA,[3][4]) is considered standard on all ARM and RISC-V platforms and
therefore must not be listed.
In addition to the properties listed above, a state node may require
additional properties specific to the entry-method defined in the
@@ -275,7 +301,27 @@ patternProperties:
properties:
compatible:
const: arm,idle-state
enum:
- arm,idle-state
- riscv,idle-state
arm,psci-suspend-param:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
power_state parameter to pass to the ARM PSCI suspend call.
Device tree nodes that require usage of PSCI CPU_SUSPEND function
(i.e. idle states node with entry-method property is set to "psci")
must specify this property.
riscv,sbi-suspend-param:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
suspend_type parameter to pass to the RISC-V SBI HSM suspend call.
This property is required in idle state nodes of device tree meant
for RISC-V systems. For more details on the suspend_type parameter
refer the SBI specifiation v0.3 (or higher) [7].
local-timer-stop:
description:
@@ -317,6 +363,8 @@ patternProperties:
description:
A string used as a descriptive name for the idle state.
additionalProperties: false
required:
- compatible
- entry-latency-us
@@ -658,4 +706,150 @@ examples:
};
};
- |
// Example 3 (RISC-V 64-bit, 4-cpu systems, two clusters):
cpus {
#size-cells = <0>;
#address-cells = <1>;
cpu@0 {
device_type = "cpu";
compatible = "riscv";
reg = <0x0>;
riscv,isa = "rv64imafdc";
mmu-type = "riscv,sv48";
cpu-idle-states = <&CPU_RET_0_0 &CPU_NONRET_0_0
&CLUSTER_RET_0 &CLUSTER_NONRET_0>;
cpu_intc0: interrupt-controller {
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
interrupt-controller;
};
};
cpu@1 {
device_type = "cpu";
compatible = "riscv";
reg = <0x1>;
riscv,isa = "rv64imafdc";
mmu-type = "riscv,sv48";
cpu-idle-states = <&CPU_RET_0_0 &CPU_NONRET_0_0
&CLUSTER_RET_0 &CLUSTER_NONRET_0>;
cpu_intc1: interrupt-controller {
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
interrupt-controller;
};
};
cpu@10 {
device_type = "cpu";
compatible = "riscv";
reg = <0x10>;
riscv,isa = "rv64imafdc";
mmu-type = "riscv,sv48";
cpu-idle-states = <&CPU_RET_1_0 &CPU_NONRET_1_0
&CLUSTER_RET_1 &CLUSTER_NONRET_1>;
cpu_intc10: interrupt-controller {
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
interrupt-controller;
};
};
cpu@11 {
device_type = "cpu";
compatible = "riscv";
reg = <0x11>;
riscv,isa = "rv64imafdc";
mmu-type = "riscv,sv48";
cpu-idle-states = <&CPU_RET_1_0 &CPU_NONRET_1_0
&CLUSTER_RET_1 &CLUSTER_NONRET_1>;
cpu_intc11: interrupt-controller {
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
interrupt-controller;
};
};
idle-states {
CPU_RET_0_0: cpu-retentive-0-0 {
compatible = "riscv,idle-state";
riscv,sbi-suspend-param = <0x10000000>;
entry-latency-us = <20>;
exit-latency-us = <40>;
min-residency-us = <80>;
};
CPU_NONRET_0_0: cpu-nonretentive-0-0 {
compatible = "riscv,idle-state";
riscv,sbi-suspend-param = <0x90000000>;
entry-latency-us = <250>;
exit-latency-us = <500>;
min-residency-us = <950>;
};
CLUSTER_RET_0: cluster-retentive-0 {
compatible = "riscv,idle-state";
riscv,sbi-suspend-param = <0x11000000>;
local-timer-stop;
entry-latency-us = <50>;
exit-latency-us = <100>;
min-residency-us = <250>;
wakeup-latency-us = <130>;
};
CLUSTER_NONRET_0: cluster-nonretentive-0 {
compatible = "riscv,idle-state";
riscv,sbi-suspend-param = <0x91000000>;
local-timer-stop;
entry-latency-us = <600>;
exit-latency-us = <1100>;
min-residency-us = <2700>;
wakeup-latency-us = <1500>;
};
CPU_RET_1_0: cpu-retentive-1-0 {
compatible = "riscv,idle-state";
riscv,sbi-suspend-param = <0x10000010>;
entry-latency-us = <20>;
exit-latency-us = <40>;
min-residency-us = <80>;
};
CPU_NONRET_1_0: cpu-nonretentive-1-0 {
compatible = "riscv,idle-state";
riscv,sbi-suspend-param = <0x90000010>;
entry-latency-us = <250>;
exit-latency-us = <500>;
min-residency-us = <950>;
};
CLUSTER_RET_1: cluster-retentive-1 {
compatible = "riscv,idle-state";
riscv,sbi-suspend-param = <0x11000010>;
local-timer-stop;
entry-latency-us = <50>;
exit-latency-us = <100>;
min-residency-us = <250>;
wakeup-latency-us = <130>;
};
CLUSTER_NONRET_1: cluster-nonretentive-1 {
compatible = "riscv,idle-state";
riscv,sbi-suspend-param = <0x91000010>;
local-timer-stop;
entry-latency-us = <600>;
exit-latency-us = <1100>;
min-residency-us = <2700>;
wakeup-latency-us = <1500>;
};
};
};
...

View File

@@ -87,6 +87,12 @@ properties:
- compatible
- interrupt-controller
cpu-idle-states:
$ref: '/schemas/types.yaml#/definitions/phandle-array'
description: |
List of phandles to idle state nodes supported
by this hart (see ./idle-states.yaml).
required:
- riscv,isa
- interrupt-controller

View File

@@ -4614,6 +4614,20 @@ S: Supported
F: drivers/cpuidle/cpuidle-psci.h
F: drivers/cpuidle/cpuidle-psci-domain.c
CPUIDLE DRIVER - DT IDLE PM DOMAIN
M: Ulf Hansson <ulf.hansson@linaro.org>
L: linux-pm@vger.kernel.org
S: Supported
F: drivers/cpuidle/dt_idle_genpd.c
F: drivers/cpuidle/dt_idle_genpd.h
CPUIDLE DRIVER - RISC-V SBI
M: Anup Patel <anup@brainfault.org>
L: linux-pm@vger.kernel.org
L: linux-riscv@lists.infradead.org
S: Maintained
F: drivers/cpuidle/cpuidle-riscv-sbi.c
CRAMFS FILESYSTEM
M: Nicolas Pitre <nico@fluxnic.net>
S: Maintained

View File

@@ -18,6 +18,7 @@ config RISCV
select ARCH_HAS_DEBUG_VM_PGTABLE
select ARCH_HAS_DEBUG_VIRTUAL if MMU
select ARCH_HAS_DEBUG_WX
select ARCH_HAS_FAST_MULTIPLIER
select ARCH_HAS_GCOV_PROFILE_ALL
select ARCH_HAS_GIGANTIC_PAGE
select ARCH_HAS_KCOV
@@ -34,6 +35,7 @@ config RISCV
select ARCH_KEEP_MEMBLOCK
select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT
select ARCH_USE_CMPXCHG_LOCKREF
select ARCH_USE_QUEUED_SPINLOCKS
select ARCH_USE_QUEUED_RWLOCKS
select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
@@ -42,7 +44,7 @@ config RISCV
select CLONE_BACKWARDS
select CLINT_TIMER if !MMU
select COMMON_CLK
select CPU_PM if (SUSPEND || CPU_IDLE)
select CPU_PM if CPU_IDLE || HIBERNATION
select COMPAT_BINFMT_ELF if BINFMT_ELF && COMPAT
select EDAC_SUPPORT
select DMA_DIRECT_REMAP
@@ -403,7 +405,9 @@ config VECTOR
config THEAD_ISA
bool "T-HEAD extension ISA in AFLAGS with -march=_xtheadc"
default n
default y
help
Say N here if you want to disable xtheadc in the kernel.
endmenu
@@ -545,6 +549,18 @@ source "kernel/power/Kconfig"
config ARCH_SUSPEND_POSSIBLE
def_bool y
config ARCH_HIBERNATION_POSSIBLE
def_bool y
config ARCH_HIBERNATION_HEADER
def_bool HIBERNATION
endmenu
menu "CPU Power Management"
source "drivers/cpuidle/Kconfig"
endmenu
source "arch/riscv/kvm/Kconfig"

View File

@@ -19,6 +19,9 @@ config SOC_VIRT
select GOLDFISH
select RTC_DRV_GOLDFISH if RTC_CLASS
select SIFIVE_PLIC
select PM_GENERIC_DOMAINS if PM
select PM_GENERIC_DOMAINS_OF if PM && OF
select RISCV_SBI_CPUIDLE if CPU_IDLE
help
This enables support for QEMU Virt Machine.

View File

@@ -50,10 +50,15 @@ endif
# ISA string setting
riscv-march-$(CONFIG_ARCH_RV32I) := rv32ima
riscv-march-$(CONFIG_ARCH_RV64I) := rv64ima
riscv-march-$(CONFIG_FPU) := $(riscv-march-y)fd
riscv-march-$(CONFIG_FPU) := $(riscv-march-y)fd
riscv-march-$(CONFIG_RISCV_ISA_C) := $(riscv-march-y)c
riscv-march-$(CONFIG_VECTOR) := $(riscv-march-y)v0p7
riscv-march-$(CONFIG_THEAD_ISA) := $(riscv-march-y)_xtheadc
# Fix mainline build
toolchain-have-v0p7 := $(call cc-option-yn, -march=$(riscv-march-y)v0p7)
riscv-march-$(toolchain-have-v0p7) := $(riscv-march-y)v0p7
toolchain-have-xtheadc := $(call cc-option-yn, -march=$(riscv-march-y)_xtheadc)
riscv-march-$(toolchain-have-xtheadc) := $(riscv-march-y)_xtheadc
# Newer binutils versions default to ISA spec version 20191213 which moves some
# instructions from the I extension to the Zicsr and Zifencei extensions.

View File

@@ -1,4 +1,9 @@
# SPDX-License-Identifier: GPL-2.0
ifeq ($(CONFIG_OF_OVERLAY),y)
DTC_FLAGS += -@
endif
subdir-y += sifive
subdir-y += kendryte
subdir-y += thead

View File

@@ -1,44 +1,80 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_SOC_THEAD) += ice.dtb
dtb-$(CONFIG_SOC_THEAD) += light-fm-emu.dtb light_mpw.dtb
dtb-$(CONFIG_SOC_THEAD) += light-fm-emu-npu-fce.dtb
dtb-$(CONFIG_SOC_THEAD) += light-fm-emu-gpu.dtb
dtb-$(CONFIG_SOC_THEAD) += light-fm-emu-dsp.dtb
dtb-$(CONFIG_SOC_THEAD) += light-fm-emu-audio.dtb light-a-val-audio-hdmi.dtb
dtb-$(CONFIG_SOC_THEAD) += light-fm-emu-hdmi.dtb
dtb-$(CONFIG_SOC_THEAD) += light-fm-emu-dsi0-hdmi.dtb
dtb-$(CONFIG_SOC_THEAD) += light-a-val.dtb light-a-val-sv.dtb
dtb-$(CONFIG_SOC_THEAD) += light-a-val-ddr2G.dtb light-a-val-ddr1G.dtb
dtb-$(CONFIG_SOC_THEAD) += light-a-val-npu-fce.dtb
dtb-$(CONFIG_SOC_THEAD) += light-a-val-iso7816.dtb
dtb-$(CONFIG_SOC_THEAD) += light-a-val-nand.dtb
dtb-$(CONFIG_SOC_THEAD) += light-a-val-audio.dtb light-a-val-audio-i2s-8ch.dtb
dtb-$(CONFIG_SOC_THEAD) += light-a-val-audio-tdm.dtb
dtb-$(CONFIG_SOC_THEAD) += light-a-val-audio-spdif.dtb
dtb-$(CONFIG_SOC_THEAD) += light-a-val-dsi0.dtb light-a-val-dsi1.dtb light-a-val-hdmi.dtb light-a-val-dsi0-dsi1.dtb light-a-val-dsi0-hdmi.dtb light-a-val-dsi0-hdmi-audio.dtb light-a-val-dpi0.dtb light-a-val-dpi0-dpi1.dtb
dtb-$(CONFIG_SOC_THEAD) += light-a-val-wcn.dtb
dtb-$(CONFIG_SOC_THEAD) += light-a-val-gpio-keys.dtb
dtb-$(CONFIG_SOC_THEAD) += light-a-val-khv.dtb
dtb-$(CONFIG_SOC_THEAD) += light-a-val-sec.dtb
dtb-$(CONFIG_SOC_THEAD) += light-a-val-miniapp-hdmi.dtb
dtb-$(CONFIG_SOC_THEAD) += light-a-product.dtb
dtb-$(CONFIG_SOC_THEAD) += light-b-product.dtb light-b-product-sec.dtb
dtb-$(CONFIG_SOC_THEAD) += light-b-product-ddr1G.dtb
dtb-$(CONFIG_SOC_THEAD) += light-b-product-miniapp-hdmi.dtb
dtb-$(CONFIG_SOC_THEAD) += light-a-val-full.dtb
dtb-$(CONFIG_SOC_THEAD) += light-ant-ref.dtb
dtb-$(CONFIG_SOC_THEAD) += light-ant-discrete.dtb
ifeq ($(CONFIG_OF_OVERLAY),y)
DTC_FLAGS += -@
endif
dtb-$(CONFIG_SOC_THEAD_ICE) += ice.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_MPW) += th1520_mpw.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_EMU) += th1520-fm-emu.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_EMU) += th1520-fm-emu-npu-fce.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_EMU) += th1520-fm-emu-gpu.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_EMU) += th1520-fm-emu-dsp.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_EMU) += th1520-fm-emu-audio.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_EMU) += th1520-fm-emu-hdmi.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_EMU) += th1520-fm-emu-dsi0-hdmi.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-a-val.dtb th1520-a-val-sec.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-a-val-crash.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-a-val-audio-i2s-8ch.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-a-val-audio-tdm.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-a-val-audio-spdif.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-a-val-dsi0-hdmi.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-a-val-dsi0-dsi1.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_DEV) += th1520-a-val-audio.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_DEV) += th1520-a-val-sv.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_DEV) += th1520-a-val-ddr2G.dtb th1520-a-val-ddr1G.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_DEV) += th1520-a-val-npu-fce.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_DEV) += th1520-a-val-iso7816.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_DEV) += th1520-a-val-dsi0.dtb th1520-a-val-dsi1.dtb th1520-a-val-hdmi.dtb th1520-a-val-dsi0-hdmi-audio.dtb th1520-a-val-dpi0.dtb th1520-a-val-dpi0-dpi1.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_DEV) += th1520-a-val-wcn.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_DEV) += th1520-a-val-khv.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_DEV) += th1520-a-val-miniapp-hdmi.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_PRD) += th1520-a-product.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_DEV) += th1520-a-val-full.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_DEV) += th1520-a-ref.dtb th1520-a-ref-dsi0.dtb th1520-a-ref-dsi0-hdmi.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-b-product.dtb th1520-b-product-sec.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-b-product-crash.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_DEV) += th1520-b-product-ddr1G.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_DEV) += th1520-b-product-miniapp-hdmi.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_DEV) += th1520-b-ref.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_DEV) += th1520-b-power.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_ANT) += th1520-ant-ref.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_ANT) += th1520-ant-ref-crash.dtb th1520-ant-discrete-crash.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_DEV) += th1520-ant-discrete.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_DEV) += th1520-beagle.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-lpi4a-product.dtb th1520-lpi4a-product-sec.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-lpi4a-product-crash.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-lpi4a-camera-tuning.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-lpi4a-hx8279.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-lpi4a-dsi0.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_DEV) += th1520-lpi4a-ddr2G.dtb
dtb-$(CONFIG_SOC_THEAD_TH1520_ANDROID) += th1520-a-val-android.dtb
dtb-$(CONFIG_SOC_THEAD_FIRE) += fire-emu.dtb fire-emu-crash.dtb
dtb-$(CONFIG_SOC_THEAD_FIRE) += fire-emu-soc-base.dtb fire-emu-soc-c910x4.dtb fire-emu-gpu-dpu-dsi0.dtb fire-emu-vi-dsp-vo.dtb fire-emu-vi-vp-vo.dtb
dtb-$(CONFIG_SOC_THEAD_FIRE) += fire-emu-soc-base-sec.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-beagle.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-lpi4a-16gb.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-lpi4a-laptop.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-lpi4a-console.dtb th1520-lpi4a-console-16g.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-lpi4a-cluster.dtb th1520-lpi4a-cluster-16gb.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-lpi4a-z14inch-m0.dtb th1520-lpi4a-z14inch-m0-16g.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-milkv-meles.dtb th1520-milkv-meles-4g.dtb th1520-milkv-meles-dsi0.dtb
# huiwei support
dtb-$(CONFIG_SOC_THEAD) += th1520-huiwei-product.dtb th1520-huiwei-dsi0.dtb
# compat old name
dtb-$(CONFIG_SOC_THEAD) += light-lpi4a.dtb light-lpi4a-16gb.dtb
dtb-$(CONFIG_SOC_THEAD) += light-lpi4a-console.dtb light-lpi4a-console-16g.dtb
dtb-$(CONFIG_SOC_THEAD) += light-beagle.dtb
dtb-$(CONFIG_SOC_THEAD) += light-lpi4a.dtb light-lpi4a-ddr2G.dtb light-lpi4a-16gb.dtb
dtb-$(CONFIG_SOC_THEAD) += light-lpi4a-cluster.dtb light-lpi4a-cluster-16gb.dtb
dtb-$(CONFIG_SOC_THEAD) += light-a-ref.dtb light-a-ref-dsi0.dtb light-a-ref-dsi0-hdmi.dtb
dtb-$(CONFIG_SOC_THEAD) += light-b-ref.dtb
dtb-$(CONFIG_SOC_THEAD) += light-a-val-crash.dtb light-b-product-crash.dtb light-ant-ref-crash.dtb light-ant-discrete-crash.dtb
dtb-$(CONFIG_SOC_THEAD) += light-b-power.dtb
dtb-$(CONFIG_SOC_THEAD) += light-a-val-android.dtb
# compat mainline name
dtb-$(CONFIG_SOC_THEAD) += th1520-lichee-pi-4a.dtb th1520-lichee-pi-4a-16g.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-lichee-cluster-4a.dtb th1520-lichee-cluster-4a-16g.dtb
dtb-$(CONFIG_SOC_THEAD) += th1520-beaglev-ahead.dtb
dtb-$(CONFIG_SOC_THEAD) += fire-emu.dtb fire-emu-crash.dtb
dtb-$(CONFIG_SOC_THEAD) += fire-emu-soc-base.dtb fire-emu-soc-c910x4.dtb fire-emu-gpu-dpu-dsi0.dtb fire-emu-vi-dsp-vo.dtb fire-emu-vi-vp-vo.dtb
dtb-$(CONFIG_SOC_THEAD) += fire-emu-soc-base-sec.dtb
dtb-$(CONFIG_SOC_THEAD) += light-lpi4a-laptop.dtb
targets += dtbs dtbs_install
targets += $(dtb-y)
subdir-y := overlays

View File

@@ -1,856 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021-2022 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "fire.dtsi"
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/gpio/gpio.h>
#include "light-vi-devices.dtsi"
/ {
model = "T-HEAD fire fpga board";
compatible = "thead,fire-emu", "thead,fire";
chosen {
bootargs = "console=ttyS0,115200 earlycon";
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
status = "disabled";
led0 {
label = "SYS_STATUS";
gpios = <&gpio1_porta 15 0>; /* GPIO_ACTIVE_HIGH: 0 */
default-state = "off";
};
};
display-subsystem {
status = "okay";
};
lcd0_backlight: pwm-backlight@0 {
status = "disabled";
compatible = "pwm-backlight";
pwms = <&pwm 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
};
light_iopmp: iopmp {
status = "disabled";
compatible = "thead,light-iopmp";
/* config#1: multiple valid regions */
iopmp_emmc: IOPMP_EMMC {
regions = <0x000000 0x100000>,
<0x100000 0x200000>;
attr = <0xFFFFFFFF>;
dummy_slave= <0x800000>;
};
/* config#2: iopmp bypass */
iopmp_sdio0: IOPMP_SDIO0 {
bypass_en;
};
/* config#3: iopmp default region set */
iopmp_sdio1: IOPMP_SDIO1 {
attr = <0xFFFFFFFF>;
is_default_region;
};
iopmp_usb0: IOPMP_USB0 {
attr = <0xFFFFFFFF>;
is_default_region;
};
iopmp_ao: IOPMP_AO {
is_default_region;
};
iopmp_aud: IOPMP_AUD {
is_default_region;
};
iopmp_chip_dbg: IOPMP_CHIP_DBG {
is_default_region;
};
iopmp_eip120i: IOPMP_EIP120I {
is_default_region;
};
iopmp_eip120ii: IOPMP_EIP120II {
is_default_region;
};
iopmp_eip120iii: IOPMP_EIP120III {
is_default_region;
};
iopmp_isp0: IOPMP_ISP0 {
is_default_region;
};
iopmp_isp1: IOPMP_ISP1 {
is_default_region;
};
iopmp_dw200: IOPMP_DW200 {
is_default_region;
};
iopmp_vipre: IOPMP_VIPRE {
is_default_region;
};
iopmp_venc: IOPMP_VENC {
is_default_region;
};
iopmp_vdec: IOPMP_VDEC {
is_default_region;
};
iopmp_g2d: IOPMP_G2D {
is_default_region;
};
iopmp0_dpu: IOPMP0_DPU {
bypass_en;
};
iopmp1_dpu: IOPMP1_DPU {
bypass_en;
};
iopmp_gpu: IOPMP_GPU {
is_default_region;
};
iopmp_gmac1: IOPMP_GMAC1 {
is_default_region;
};
iopmp_gmac2: IOPMP_GMAC2 {
is_default_region;
};
iopmp_dmac: IOPMP_DMAC {
is_default_region;
};
iopmp_tee_dmac: IOPMP_TEE_DMAC {
is_default_region;
};
iopmp_dsp0: IOPMP_DSP0 {
is_default_region;
};
iopmp_dsp1: IOPMP_DSP1 {
is_default_region;
};
};
mbox_910t_client1: mbox_910t_client1 {
compatible = "thead,light-mbox-client";
mbox-names = "902";
mboxes = <&mbox_910t 1 0>;
status = "disabled";
};
mbox_910t_client2: mbox_910t_client2 {
compatible = "thead,light-mbox-client";
mbox-names = "906";
mboxes = <&mbox_910t 2 0>;
status = "disabled";
};
lightsound: lightsound@1 {
compatible = "simple-audio-card";
simple-audio-card,name = "Light-Sound-Card";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
dummy_codec: dummy_codec {
#sound-dai-cells = <1>;
compatible = "linux,bt-sco";
status = "okay";
};
wcn_wifi: wireless-wlan {
compatible = "wlan-platdata";
clock-names = "clk_wifi";
ref-clock-frequency = <24000000>;
keep_wifi_power_on;
pinctrl-names = "default";
wifi_chip_type = "rtl8723ds";
WIFI,poweren_gpio = <&gpio2_porta 26 0>;
WIFI,reset_n = <&gpio2_porta 28 0>;
status = "disabled";
};
wcn_bt: wireless-bluetooth {
compatible = "bluetooth-platdata";
pinctrl-names = "default", "rts_gpio";
BT,power_gpio = <&gpio2_porta 29 0>;
status = "disabled";
};
gpio_keys: gpio_keys{
compatible = "gpio-keys";
pinctrl-names = "default";
status = "disabled";
key-volumedown {
label = "Volume Down Key";
linux,code = <KEY_1>;
debounce-interval = <2>;
gpios = <&ao_gpio_porta 4 GPIO_ACTIVE_LOW>;
};
key-volumeup {
label = "Volume Up Key";
linux,code = <KEY_2>;
debounce-interval = <2>;
gpios = <&ao_gpio_porta 5 GPIO_ACTIVE_LOW>;
};
};
aon: light-aon {
compatible = "thead,light-aon";
mbox-names = "aon";
mboxes = <&mbox_910t 1 0>;
status = "disabled";
pd: light-aon-pd {
compatible = "thead,light-aon-pd";
#power-domain-cells = <1>;
status = "disabled";
};
aon_reg_dialog: light-dialog-reg {
compatible = "thead,light-dialog-pmic";
status = "disabled";
};
c910_cpufreq {
compatible = "thead,light-mpw-cpufreq";
status = "disabled";
};
test: light-aon-test {
compatible = "thead,light-aon-test";
status = "disabled";
};
};
};
&resmem {
#address-cells = <2>;
#size-cells = <2>;
ranges;
tee_mem: memory@1a000000 {
reg = <0x0 0x1a000000 0 0x4000000>;
no-map;
};
dsp0_mem: memory@20000000 { /**0x2000_0000~0x2040_0000 4M**/
reg = <0x0 0x20000000 0x0 0x00280000 /* DSP FW code&data section 2.5M*/
0x0 0x20280000 0x0 0x00001000 /* DSP communication area 4K*/
0x0 0x20281000 0x0 0x00007000 /* Panic/log page 28K */
0x0 0x20288000 0x0 0x00178000>; /* DSP shared memory 1.5M-32K*/
no-map;
};
dsp1_mem: memory@20400000 { /**0x2040_0000~0x2080_0000 4M**/
reg = <0x0 0x20400000 0x0 0x00280000 /* DSP FW code&data section */
0x0 0x20680000 0x0 0x00001000 /* DSP communication area */
0x0 0x20681000 0x0 0x00007000 /* Panic/log page*/
0x0 0x20688000 0x0 0x00178000>; /* DSP shared memory */
no-map;
};
vi_mem: framebuffer@0f800000 {
reg = <0x0 0x0F800000 0x0 0x05400000 /* vi_mem_pool_region[0] 84 MB (default) */
0x0 0x14C00000 0x0 0x01D00000 /* vi_mem_pool_region[1] 29 MB */
0x0 0x16900000 0x0 0x03200000>; /* vi_mem_pool_region[2] 50 MB */
no-map;
};
facelib_mem: memory@22000000 {
reg = <0x0 0x22000000 0x0 0x10000000>;
no-map;
};
};
&clk {
status = "disabled";
};
&i2c0 {
clock-frequency = <400000>;
status = "okay";
eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
pagesize = <32>;
};
codec: wm8960@1a {
#sound-dai-cells = <0>;
compatible = "wlf,wm8960";
reg = <0x1a>;
wlf,shared-lrclk;
wlf,hp-cfg = <3 2 3>;
wlf,gpio-cfg = <1 3>;
};
touch@5d {
#gpio-cells = <2>;
compatible = "goodix,gt911";
status = "disabled";
reg = <0x5d>;
interrupt-parent = <&gpio1_porta>;
interrupts = <8 0>;
irq-gpios = <&gpio1_porta 8 0>;
reset-gpios = <&gpio1_porta 7 0>;
touchscreen-size-x = <800>;
touchscreen-size-y = <1280>;
};
};
&audio_i2c0 {
clock-frequency = <100000>;
status = "disabled";
es8156_audio_codec: es8156@8 {
#sound-dai-cells = <0>;
compatible = "everest,es8156";
reg = <0x08>;
};
es7210_audio_codec: es7210@40 {
#sound-dai-cells = <0>;
compatible = "MicArray_0";
reg = <0x40>;
};
};
&i2c1 {
clock-frequency = <400000>;
status = "disabled";
touch1@5d {
#gpio-cells = <2>;
compatible = "goodix,gt911";
reg = <0x5d>;
interrupt-parent = <&gpio1_porta>;
interrupts = <12 0>;
irq-gpios = <&gpio1_porta 12 0>;
reset-gpios = <&gpio1_porta 11 0>;
touchscreen-size-x = <800>;
touchscreen-size-y = <1280>;
};
};
&spi0 {
num-cs = <1>;
cs-gpios = <&gpio2_porta 15 0>; // GPIO_ACTIVE_HIGH: 0
rx-sample-delay-ns = <10>;
status = "okay";
spi_norflash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "winbond,w25q64jwm", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
w25q,fast-read;
status = "disabled";
};
spidev@1 {
compatible = "spidev";
#address-cells = <0x1>;
#size-cells = <0x1>;
reg = <0x1>;
spi-max-frequency = <50000000>;
};
};
&qspi0 {
num-cs = <1>;
cs-gpios = <&gpio2_porta 3 0>;
rx-sample-dly = <4>;
status = "disabled";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-nand";
spi-max-frequency = <100000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
reg = <0>;
partition@0 {
label = "ubi1";
reg = <0x00000000 0x08000000>;
};
};
};
&qspi1 {
num-cs = <1>;
cs-gpios = <&gpio0_porta 1 0>;
status = "disabled";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-nand";
spi-max-frequency = <66000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
reg = <0>;
partition@0 {
label = "ubi2";
reg = <0x00000000 0x08000000>;
};
};
};
&gmac0 {
phy-mode = "rgmii-id";
rx-clk-delay = <0x00>; /* for RGMII */
tx-clk-delay = <0x00>; /* for RGMII */
phy-handle = <&phy_88E1111_0>;
status = "okay";
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy_88E1111_0: ethernet-phy@0 {
reg = <0x1>;
};
phy_88E1111_1: ethernet-phy@1 {
reg = <0x2>;
};
};
};
&emmc {
max-frequency = <198000000>;
non-removable;
mmc-hs400-1_8v;
io_fixed_1v8;
is_emmc;
no-sdio;
no-sd;
pull_up;
bus-width = <8>;
status = "okay";
};
&sdhci0 {
max-frequency = <198000000>;
bus-width = <4>;
pull_up;
wprtn_ignore;
status = "okay";
};
&sdhci1 {
max-frequency = <100000000>;
bus-width = <4>;
pull_up;
no-sd;
no-mmc;
non-removable;
io_fixed_1v8;
post-power-on-delay-ms = <50>;
wprtn_ignore;
cap-sd-highspeed;
keep-power-in-suspend;
wakeup-source;
status = "disabled";
};
&padctrl0_apsys { /* right-pinctrl */
light-evb-padctrl0 {
/*
* Pin Configuration Node:
* Format: <pin_id mux_node config>
*/
pinctrl_uart0: uart0grp {
thead,pins = <
FM_UART0_TXD 0x0 0x72
FM_UART0_RXD 0x0 0x72
>;
};
pinctrl_spi0: spi0grp {
thead,pins = <
FM_SPI_CSN 0x3 0x20a
FM_SPI_SCLK 0x0 0x20a
FM_SPI_MISO 0x0 0x23a
FM_SPI_MOSI 0x0 0x23a
>;
};
pinctrl_qspi0: qspi0grp {
thead,pins = <
FM_QSPI0_SCLK 0x0 0x20f
FM_QSPI0_CSN0 0x3 0x20f
FM_QSPI0_CSN1 0x0 0x20f
FM_QSPI0_D0_MOSI 0x0 0x23f
FM_QSPI0_D1_MISO 0x0 0x23f
FM_QSPI0_D2_WP 0x0 0x23f
FM_QSPI0_D3_HOLD 0x0 0x23f
>;
};
pinctrl_light_i2s0: i2s0grp {
thead,pins = <
FM_QSPI0_SCLK 0x2 0x208
FM_QSPI0_CSN0 0x2 0x238
FM_QSPI0_CSN1 0x2 0x208
FM_QSPI0_D0_MOSI 0x2 0x238
FM_QSPI0_D1_MISO 0x2 0x238
FM_QSPI0_D2_WP 0x2 0x238
FM_QSPI0_D3_HOLD 0x2 0x238
>;
};
pinctrl_pwm: pwmgrp {
thead,pins = <
FM_GPIO3_2 0x1 0x208 /* pwm0 */
FM_GPIO3_3 0x1 0x208 /* pwm1 */
>;
};
};
};
&padctrl1_apsys { /* left-pinctrl */
light-evb-padctrl1 {
/*
* Pin Configuration Node:
* Format: <pin_id mux_node config>
*/
pinctrl_uart3: uart3grp {
thead,pins = <
FM_UART3_TXD 0x0 0x72
FM_UART3_RXD 0x0 0x72
>;
};
pinctrl_uart4: uart4grp {
thead,pins = <
FM_UART4_TXD 0x0 0x72
FM_UART4_RXD 0x0 0x72
FM_UART4_CTSN 0x0 0x72
FM_UART4_RTSN 0x0 0x72
>;
};
pinctrl_qspi1: qspi1grp {
thead,pins = <
FM_QSPI1_SCLK 0x0 0x20a
FM_QSPI1_CSN0 0x3 0x20a
FM_QSPI1_D0_MOSI 0x0 0x23a
FM_QSPI1_D1_MISO 0x0 0x23a
FM_QSPI1_D2_WP 0x0 0x23a
FM_QSPI1_D3_HOLD 0x0 0x23a
>;
};
pinctrl_iso7816: iso7816grp {
thead,pins = <
FM_QSPI1_SCLK 0x1 0x208
FM_QSPI1_D0_MOSI 0x1 0x238
FM_QSPI1_D1_MISO 0x1 0x238
FM_QSPI1_D2_WP 0x1 0x238
FM_QSPI1_D3_HOLD 0x1 0x238
>;
};
};
};
&i2c2 {
clock-frequency = <400000>;
status = "okay";
eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
pagesize = <32>;
};
};
&i2c3 {
clock-frequency = <400000>;
status = "okay";
eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
pagesize = <32>;
};
};
&i2c4 {
clock-frequency = <400000>;
status = "okay";
eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
pagesize = <32>;
};
pcal6408ahk_a: gpio@20 {
compatible = "nxp,pcal9554b";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
};
&isp0 {
status = "disabled";
};
&isp1 {
status = "disabled";
};
&isp_ry0 {
status = "disabled";
};
&dewarp {
status = "disabled";
};
&dec400_isp0 {
status = "disabled";
};
&dec400_isp1 {
status = "disabled";
};
&dec400_isp2 {
status = "disabled";
};
&bm_visys {
status = "disabled";
};
&bm_csi0 {
status = "disabled";
};
&bm_csi1 {
status = "disabled";
};
&bm_csi2 {
status = "disabled";
};
&vi_pre {
//vi_pre_irq_en = <1>;
status = "disabled";
};
&xtensa_dsp {
status = "disabled";
};
&xtensa_dsp0 {
status = "disabled";
memory-region = <&dsp0_mem>;
};
&xtensa_dsp1{
status = "disabled";
memory-region = <&dsp1_mem>;
};
&vvcam_flash_led0{
flash_led_name = "aw36413_aw36515";
floodlight_i2c_bus = /bits/ 8 <2>;
floodlight_en_pin = <&gpio1_porta 25 0>;
//projection_i2c_bus = /bits/ 8 <2>;
flash_led_touch_pin = <&gpio1_porta 27 0>; //flash led touch pin
status = "disabled";
};
&vvcam_sensor1 {
status = "disabled";
};
&vvcam_sensor2 {
status = "disabled";
};
&vvcam_sensor3 {
status = "disabled";
};
&vvcam_sensor4 {
status = "disabled";
};
&vvcam_sensor5 {
status = "disabled";
};
&video0{
status = "disabled";
};
&video1{
status = "disabled";
};
&video2{
status = "disabled";
};
&video3{
status = "disabled";
};
&video4{
status = "disabled";
};
&video5{
status = "disabled";
};
&video6{
status = "disabled";
};
&video7{
status = "disabled";
};
&video8{
status = "disabled";
};
&video9{
status = "disabled";
};
&video10{
status = "disabled";
};
&video11{
status = "disabled";
};
&video12{
status = "disabled";
};
&trng {
status = "disabled";
};
&eip_28 {
status = "disabled";
};
&vdec {
status = "disabled";
};
&venc {
status = "disabled";
};
&isp_venc_shake {
status = "disabled";
};
&vidmem {
status = "disabled";
};
&gpu {
status = "disabled";
};
&dpu_enc0 {
status = "disabled";
};
&dpu_enc1 {
status = "disabled";
};
&dpu {
status = "disabled";
};
&dsi0 {
status = "disabled";
};
&dhost_0 {
status = "disabled";
};
&disp1_out {
status = "disabled";
};
&hdmi_tx {
status = "disabled";
};
&lightsound {
status = "disabled";
};
&light_i2s {
status = "disabled";
};
&i2s0 {
status = "disabled";
};
&i2s1 {
status = "disabled";
};
&i2s3 {
status = "disabled";
};
&khvhost {
status = "disabled";
};

View File

@@ -1,98 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "fire-crash.dts"
&aon {
aon_reg_dialog: light-dialog-reg {
compatible = "thead,light-dialog-pmic";
status = "disabled";
dvdd_cpu_reg: appcpu_dvdd {
regulator-name = "appcpu_dvdd";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
dvddm_cpu_reg: appcpu_dvddm {
regulator-name = "appcpu_dvddm";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
};
};
&cpus {
c910_0: cpu@0 {
operating-points = <
/* kHz uV */
300000 600000
800000 700000
1500000 800000
1848000 1000000
>;
light,dvddm-operating-points = <
/* kHz uV */
300000 800000
800000 800000
1500000 800000
1848000 1000000
>;
};
c910_1: cpu@1 {
operating-points = <
/* kHz uV */
300000 600000
800000 700000
1500000 800000
1848000 1000000
>;
light,dvddm-operating-points = <
/* kHz uV */
300000 800000
800000 800000
1500000 800000
1848000 1000000
>;
};
c910_2: cpu@2 {
operating-points = <
/* kHz uV */
300000 600000
800000 700000
1500000 800000
1848000 1000000
>;
light,dvddm-operating-points = <
/* kHz uV */
300000 800000
800000 800000
1500000 800000
1848000 1000000
>;
};
c910_3: cpu@3 {
operating-points = <
/* kHz uV */
300000 600000
800000 700000
1500000 800000
1848000 1000000
>;
light,dvddm-operating-points = <
/* kHz uV */
300000 800000
800000 800000
1500000 800000
1848000 1000000
>;
};
};

View File

@@ -1,107 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021-2022 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "fire-emu.dts"
&gpu {
status = "okay";
};
&vosys_reg {
status = "okay";
};
&display_subsystem {
status = "okay";
};
&dpu_enc0 {
status = "okay";
ports {
/* output */
port@1 {
reg = <1>;
enc0_out: endpoint {
remote-endpoint = <&dsi0_in>;
};
};
};
};
&dpu {
status = "okay";
};
&dsi0 {
status = "okay";
};
&dhost_0 {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi0_in: endpoint {
remote-endpoint = <&enc0_out>;
};
};
port@1 {
reg = <1>;
dsi0_out: endpoint {
remote-endpoint = <&panel0_in>;
};
};
};
panel0@0 {
compatible = "hlt,hpk070h275";
reg = <0>;
port {
panel0_in: endpoint {
remote-endpoint = <&dsi0_out>;
};
};
};
};
&aon {
status = "okay";
};
&mbox_910t {
status = "okay";
};
&mbox_910t_client1 {
status = "okay";
};
&mbox_910t_client2 {
status = "okay";
};
&dmac1 {
status = "okay";
};
&lightsound {
status = "okay";
};
&dmac2 {
status = "disabled";
};

View File

@@ -1,13 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
/dts-v1/;
/* #include "fire-emu.dts" */
#include "fire-emu-soc-base.dts"
&light_iopmp {
status = "disabled";
};

View File

@@ -1,89 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021-2022 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "fire-emu.dts"
&sdhci0 {
status = "okay";
};
&usb3_drd {
status = "okay";
};
&usb {
status = "okay";
};
&spi0 {
num-cs = <1>;
cs-gpios = <&gpio2_porta 15 0>; // GPIO_ACTIVE_HIGH: 0
rx-sample-delay-ns = <10>;
status = "okay";
spi_norflash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "winbond,w25q64jwm", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
w25q,fast-read;
status = "okay";
};
spidev@1 {
compatible = "spidev";
#address-cells = <0x1>;
#size-cells = <0x1>;
reg = <0x1>;
spi-max-frequency = <50000000>;
};
};
&qspi0 {
num-cs = <1>;
cs-gpios = <&gpio2_porta 3 0>;
rx-sample-dly = <4>;
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-nand";
spi-max-frequency = <100000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
reg = <0>;
partition@0 {
label = "ubi1";
reg = <0x00000000 0x08000000>;
};
};
};
&qspi1 {
num-cs = <1>;
cs-gpios = <&gpio0_porta 1 0>;
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-nand";
spi-max-frequency = <66000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
reg = <0>;
partition@0 {
label = "ubi2";
reg = <0x00000000 0x08000000>;
};
};
};

View File

@@ -1,19 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021-2022 Alibaba Group Holding Limited.
*/
#include "fire-emu.dts"
&c910_1 {
status = "okay";
};
&c910_2 {
status = "okay";
};
&c910_3 {
status = "okay";
};

View File

@@ -1,57 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021-2022 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "fire-emu.dts"
&c910_1 {
status = "okay";
};
&vi_pre {
status = "okay";
};
&dewarp {
status = "okay";
};
&xtensa_dsp {
status = "okay";
};
&xtensa_dsp0 {
status = "okay";
};
&xtensa_dsp1 {
status = "okay";
};
&vosys_reg {
status = "okay";
};
&display_subsystem {
status = "okay";
};
&dpu {
status = "okay";
};
&hdmi_tx {
status = "okay";
};
&dsi0 {
status = "okay";
};
&dpu_enc0 {
status = "okay";
};

View File

@@ -1,119 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021-2022 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "fire-emu.dts"
&c910_1 {
status = "okay";
};
&vi_pre {
status = "okay";
};
&dewarp {
status = "okay";
};
&venc {
status = "okay";
};
&vdec {
status = "okay";
};
&g2d {
status = "okay";
};
&vosys_reg {
status = "okay";
};
&display_subsystem {
status = "okay";
};
&dpu_enc0 {
status = "okay";
ports {
/* output */
port@1 {
reg = <1>;
enc0_out: endpoint {
remote-endpoint = <&dsi0_in>;
};
};
};
};
&dsi0 {
status = "okay";
};
&dhost_0 {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi0_in: endpoint {
remote-endpoint = <&enc0_out>;
};
};
port@1 {
reg = <1>;
dsi0_out: endpoint {
remote-endpoint = <&panel0_in>;
};
};
};
panel0@0 {
compatible = "hlt,hpk070h275";
reg = <0>;
port {
panel0_in: endpoint {
remote-endpoint = <&dsi0_out>;
};
};
};
};
&dpu_enc1 {
ports {
/delete-node/ port@0;
};
};
&disp1_out {
remote-endpoint = <&hdmi_tx_in>;
};
&dpu {
status = "okay";
};
&hdmi_tx {
status = "okay";
port@0 {
/* input */
hdmi_tx_in: endpoint {
remote-endpoint = <&disp1_out>;
};
};
};

View File

@@ -1,885 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021-2022 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "fire.dtsi"
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/gpio/gpio.h>
#include "light-vi-devices.dtsi"
/ {
model = "T-HEAD fire fpga board";
compatible = "thead,fire-emu", "thead,fire";
chosen {
bootargs = "console=ttyS0,115200 crashkernel=256M-:128M earlycon clk_ignore_unused sram=0xffe0000000,0x180000";
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
led0 {
label = "SYS_STATUS";
gpios = <&gpio1_porta 15 0>; /* GPIO_ACTIVE_HIGH: 0 */
default-state = "off";
};
};
lcd0_backlight: pwm-backlight@0 {
compatible = "pwm-backlight";
pwms = <&pwm 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
};
lcd1_backlight: pwm-backlight@1 {
compatible = "pwm-backlight";
pwms = <&pwm 1 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
};
light_iopmp: iopmp {
compatible = "thead,light-iopmp";
/* config#1: multiple valid regions */
iopmp_emmc: IOPMP_EMMC {
regions = <0x000000 0x100000>,
<0x100000 0x200000>;
attr = <0xFFFFFFFF>;
dummy_slave= <0x800000>;
};
/* config#2: iopmp bypass */
iopmp_sdio0: IOPMP_SDIO0 {
bypass_en;
};
/* config#3: iopmp default region set */
iopmp_sdio1: IOPMP_SDIO1 {
attr = <0xFFFFFFFF>;
is_default_region;
};
iopmp_usb0: IOPMP_USB0 {
attr = <0xFFFFFFFF>;
is_default_region;
};
iopmp_ao: IOPMP_AO {
is_default_region;
};
iopmp_aud: IOPMP_AUD {
is_default_region;
};
iopmp_chip_dbg: IOPMP_CHIP_DBG {
is_default_region;
};
iopmp_eip120i: IOPMP_EIP120I {
is_default_region;
};
iopmp_eip120ii: IOPMP_EIP120II {
is_default_region;
};
iopmp_eip120iii: IOPMP_EIP120III {
is_default_region;
};
iopmp_isp0: IOPMP_ISP0 {
is_default_region;
};
iopmp_isp1: IOPMP_ISP1 {
is_default_region;
};
iopmp_dw200: IOPMP_DW200 {
is_default_region;
};
iopmp_vipre: IOPMP_VIPRE {
is_default_region;
};
iopmp_venc: IOPMP_VENC {
is_default_region;
};
iopmp_vdec: IOPMP_VDEC {
is_default_region;
};
iopmp_g2d: IOPMP_G2D {
is_default_region;
};
iopmp0_dpu: IOPMP0_DPU {
bypass_en;
};
iopmp1_dpu: IOPMP1_DPU {
bypass_en;
};
iopmp_gpu: IOPMP_GPU {
is_default_region;
};
iopmp_gmac1: IOPMP_GMAC1 {
is_default_region;
};
iopmp_gmac2: IOPMP_GMAC2 {
is_default_region;
};
iopmp_dmac: IOPMP_DMAC {
is_default_region;
};
iopmp_tee_dmac: IOPMP_TEE_DMAC {
is_default_region;
};
iopmp_dsp0: IOPMP_DSP0 {
is_default_region;
};
iopmp_dsp1: IOPMP_DSP1 {
is_default_region;
};
};
mbox_910t_client1: mbox_910t_client1 {
compatible = "thead,light-mbox-client";
mbox-names = "902";
mboxes = <&mbox_910t 1 0>;
status = "disabled";
};
mbox_910t_client2: mbox_910t_client2 {
compatible = "thead,light-mbox-client";
mbox-names = "906";
mboxes = <&mbox_910t 2 0>;
status = "disabled";
};
lightsound: lightsound@1 {
compatible = "simple-audio-card";
simple-audio-card,name = "Light-Sound-Card";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
dummy_codec: dummy_codec {
#sound-dai-cells = <1>;
compatible = "linux,bt-sco";
status = "okay";
};
wcn_wifi: wireless-wlan {
compatible = "wlan-platdata";
clock-names = "clk_wifi";
ref-clock-frequency = <24000000>;
keep_wifi_power_on;
pinctrl-names = "default";
wifi_chip_type = "rtl8723ds";
WIFI,poweren_gpio = <&gpio2_porta 26 0>;
WIFI,reset_n = <&gpio2_porta 28 0>;
status = "disabled";
};
wcn_bt: wireless-bluetooth {
compatible = "bluetooth-platdata";
pinctrl-names = "default", "rts_gpio";
BT,power_gpio = <&gpio2_porta 29 0>;
status = "disabled";
};
gpio_keys: gpio_keys{
compatible = "gpio-keys";
pinctrl-names = "default";
status = "disabled";
key-volumedown {
label = "Volume Down Key";
linux,code = <KEY_1>;
debounce-interval = <2>;
gpios = <&ao_gpio_porta 4 GPIO_ACTIVE_LOW>;
};
key-volumeup {
label = "Volume Up Key";
linux,code = <KEY_2>;
debounce-interval = <2>;
gpios = <&ao_gpio_porta 5 GPIO_ACTIVE_LOW>;
};
};
aon: light-aon {
compatible = "thead,light-aon";
mbox-names = "aon";
mboxes = <&mbox_910t 1 0>;
status = "disabled";
pd: light-aon-pd {
compatible = "thead,light-aon-pd";
#power-domain-cells = <1>;
status = "disabled";
};
aon_reg_dialog: light-dialog-reg {
compatible = "thead,light-dialog-pmic";
status = "disabled";
};
c910_cpufreq {
compatible = "thead,light-mpw-cpufreq";
status = "disabled";
};
test: light-aon-test {
compatible = "thead,light-aon-test";
status = "disabled";
};
};
};
&cmamem {
alloc-ranges = <0 0xe4000000 0 0x14000000>; // [0xE400_0000 ~ 0xF800_0000]
};
&resmem {
#address-cells = <2>;
#size-cells = <2>;
ranges;
tee_mem: memory@1a000000 {
reg = <0x0 0x1a000000 0 0x4000000>;
no-map;
};
dsp0_mem: memory@20000000 { /**0x2000_0000~0x2040_0000 4M**/
reg = <0x0 0x20000000 0x0 0x00280000 /* DSP FW code&data section 2.5M*/
0x0 0x20280000 0x0 0x00001000 /* DSP communication area 4K*/
0x0 0x20281000 0x0 0x00007000 /* Panic/log page 28K */
0x0 0x20288000 0x0 0x00178000>; /* DSP shared memory 1.5M-32K*/
no-map;
};
dsp1_mem: memory@20400000 { /**0x2040_0000~0x2080_0000 4M**/
reg = <0x0 0x20400000 0x0 0x00280000 /* DSP FW code&data section */
0x0 0x20680000 0x0 0x00001000 /* DSP communication area */
0x0 0x20681000 0x0 0x00007000 /* Panic/log page*/
0x0 0x20688000 0x0 0x00178000>; /* DSP shared memory */
no-map;
};
vi_mem: framebuffer@0f800000 {
reg = <0x0 0x0F800000 0x0 0x05400000 /* vi_mem_pool_region[0] 84 MB (default) */
0x0 0x14C00000 0x0 0x01D00000 /* vi_mem_pool_region[1] 29 MB */
0x0 0x16900000 0x0 0x03200000>; /* vi_mem_pool_region[2] 50 MB */
no-map;
};
facelib_mem: memory@22000000 {
reg = <0x0 0x22000000 0x0 0x10000000>;
no-map;
};
};
&clk {
status = "disabled";
};
&i2c0 {
clock-frequency = <400000>;
status = "okay";
eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
pagesize = <32>;
};
codec: wm8960@1a {
#sound-dai-cells = <0>;
compatible = "wlf,wm8960";
reg = <0x1a>;
wlf,shared-lrclk;
wlf,hp-cfg = <3 2 3>;
wlf,gpio-cfg = <1 3>;
};
touch@5d {
#gpio-cells = <2>;
compatible = "goodix,gt911";
status = "disabled";
reg = <0x5d>;
interrupt-parent = <&gpio1_porta>;
interrupts = <8 0>;
irq-gpios = <&gpio1_porta 8 0>;
reset-gpios = <&gpio1_porta 7 0>;
touchscreen-size-x = <800>;
touchscreen-size-y = <1280>;
};
};
&audio_i2c0 {
clock-frequency = <100000>;
status = "disabled";
es8156_audio_codec: es8156@8 {
#sound-dai-cells = <0>;
compatible = "everest,es8156";
reg = <0x08>;
status = "disabled";
};
es7210_audio_codec: es7210@40 {
#sound-dai-cells = <0>;
compatible = "MicArray_0";
reg = <0x40>;
status = "disabled";
};
};
&i2c1 {
clock-frequency = <400000>;
status = "disabled";
touch1@5d {
#gpio-cells = <2>;
compatible = "goodix,gt911";
reg = <0x5d>;
interrupt-parent = <&gpio1_porta>;
interrupts = <12 0>;
irq-gpios = <&gpio1_porta 12 0>;
reset-gpios = <&gpio1_porta 11 0>;
touchscreen-size-x = <800>;
touchscreen-size-y = <1280>;
};
};
&spi0 {
num-cs = <1>;
cs-gpios = <&gpio2_porta 15 0>; // GPIO_ACTIVE_HIGH: 0
rx-sample-delay-ns = <10>;
status = "okay";
spi_norflash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "winbond,w25q64jwm", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
w25q,fast-read;
status = "disabled";
};
spidev@1 {
compatible = "spidev";
#address-cells = <0x1>;
#size-cells = <0x1>;
reg = <0x1>;
spi-max-frequency = <50000000>;
};
};
&qspi0 {
status = "disabled";
};
&qspi1 {
status = "disabled";
};
&gmac0 {
max-speed = <100>;
phy-mode = "mii";
phy-handle = <&phy_88E1111_0>;
status = "okay";
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy_88E1111_0: ethernet-phy@0 {
reg = <0x0>;
};
};
};
&emmc {
max-frequency = <198000000>;
non-removable;
/*mmc-hs400-1_8v;*/
io_fixed_1v8;
is_emmc;
no-sdio;
no-sd;
pull_up;
bus-width = <8>;
status = "okay";
};
&sdhci0 {
max-frequency = <198000000>;
bus-width = <4>;
pull_up;
wprtn_ignore;
status = "disabled";
};
&sdhci1 {
max-frequency = <100000000>;
bus-width = <4>;
pull_up;
no-sd;
no-mmc;
non-removable;
io_fixed_1v8;
post-power-on-delay-ms = <50>;
wprtn_ignore;
cap-sd-highspeed;
keep-power-in-suspend;
wakeup-source;
status = "disabled";
};
&padctrl0_apsys { /* right-pinctrl */
light-evb-padctrl0 {
/*
* Pin Configuration Node:
* Format: <pin_id mux_node config>
*/
pinctrl_uart0: uart0grp {
thead,pins = <
FM_UART0_TXD 0x0 0x72
FM_UART0_RXD 0x0 0x72
>;
};
pinctrl_spi0: spi0grp {
thead,pins = <
FM_SPI_CSN 0x3 0x20a
FM_SPI_SCLK 0x0 0x20a
FM_SPI_MISO 0x0 0x23a
FM_SPI_MOSI 0x0 0x23a
>;
};
pinctrl_qspi0: qspi0grp {
thead,pins = <
FM_QSPI0_SCLK 0x0 0x20f
FM_QSPI0_CSN0 0x3 0x20f
FM_QSPI0_CSN1 0x0 0x20f
FM_QSPI0_D0_MOSI 0x0 0x23f
FM_QSPI0_D1_MISO 0x0 0x23f
FM_QSPI0_D2_WP 0x0 0x23f
FM_QSPI0_D3_HOLD 0x0 0x23f
>;
};
pinctrl_light_i2s0: i2s0grp {
thead,pins = <
FM_QSPI0_SCLK 0x2 0x208
FM_QSPI0_CSN0 0x2 0x238
FM_QSPI0_CSN1 0x2 0x208
FM_QSPI0_D0_MOSI 0x2 0x238
FM_QSPI0_D1_MISO 0x2 0x238
FM_QSPI0_D2_WP 0x2 0x238
FM_QSPI0_D3_HOLD 0x2 0x238
>;
};
pinctrl_pwm: pwmgrp {
thead,pins = <
FM_GPIO3_2 0x1 0x208 /* pwm0 */
FM_GPIO3_3 0x1 0x208 /* pwm1 */
>;
};
};
};
&padctrl1_apsys { /* left-pinctrl */
light-evb-padctrl1 {
/*
* Pin Configuration Node:
* Format: <pin_id mux_node config>
*/
pinctrl_uart3: uart3grp {
thead,pins = <
FM_UART3_TXD 0x0 0x72
FM_UART3_RXD 0x0 0x72
>;
};
pinctrl_uart4: uart4grp {
thead,pins = <
FM_UART4_TXD 0x0 0x72
FM_UART4_RXD 0x0 0x72
FM_UART4_CTSN 0x0 0x72
FM_UART4_RTSN 0x0 0x72
>;
};
pinctrl_qspi1: qspi1grp {
thead,pins = <
FM_QSPI1_SCLK 0x0 0x20a
FM_QSPI1_CSN0 0x3 0x20a
FM_QSPI1_D0_MOSI 0x0 0x23a
FM_QSPI1_D1_MISO 0x0 0x23a
FM_QSPI1_D2_WP 0x0 0x23a
FM_QSPI1_D3_HOLD 0x0 0x23a
>;
};
pinctrl_iso7816: iso7816grp {
thead,pins = <
FM_QSPI1_SCLK 0x1 0x208
FM_QSPI1_D0_MOSI 0x1 0x238
FM_QSPI1_D1_MISO 0x1 0x238
FM_QSPI1_D2_WP 0x1 0x238
FM_QSPI1_D3_HOLD 0x1 0x238
>;
};
};
};
&i2c2 {
clock-frequency = <400000>;
status = "okay";
eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
pagesize = <32>;
};
};
&i2c3 {
clock-frequency = <400000>;
status = "okay";
eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
pagesize = <32>;
};
};
&i2c4 {
clock-frequency = <400000>;
status = "okay";
eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
pagesize = <32>;
};
pcal6408ahk_a: gpio@20 {
compatible = "nxp,pcal9554b";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
};
&isp0 {
status = "disabled";
};
&isp1 {
status = "disabled";
};
&isp_ry0 {
status = "disabled";
};
&dewarp {
status = "disabled";
};
&dec400_isp0 {
status = "disabled";
};
&dec400_isp1 {
status = "disabled";
};
&dec400_isp2 {
status = "disabled";
};
&bm_visys {
status = "disabled";
};
&bm_csi0 {
status = "disabled";
};
&bm_csi1 {
status = "disabled";
};
&bm_csi2 {
status = "disabled";
};
&vi_pre {
//vi_pre_irq_en = <1>;
status = "disabled";
};
&xtensa_dsp {
status = "disabled";
};
&xtensa_dsp0 {
status = "disabled";
memory-region = <&dsp0_mem>;
};
&xtensa_dsp1{
status = "disabled";
memory-region = <&dsp1_mem>;
};
&vvcam_flash_led0{
flash_led_name = "aw36413_aw36515";
floodlight_i2c_bus = /bits/ 8 <2>;
floodlight_en_pin = <&gpio1_porta 25 0>;
//projection_i2c_bus = /bits/ 8 <2>;
flash_led_touch_pin = <&gpio1_porta 27 0>; //flash led touch pin
status = "disabled";
};
&trng {
status = "disabled";
};
&eip_28 {
status = "okay";
};
&vdec {
status = "disabled";
};
&venc {
status = "disabled";
};
&isp_venc_shake {
status = "disabled";
};
&vidmem {
status = "okay";
memory-region = <&vi_mem>;
};
&gpu {
status = "disabled";
};
&cpus {
c910_0: cpu@0 {
operating-points = <
/* kHz uV */
300000 650000
800000 700000
1500000 800000
1848000 1000000
>;
light,dvddm-operating-points = <
/* kHz uV */
300000 800000
800000 800000
1500000 800000
1848000 1000000
>;
};
c910_1: cpu@1 {
status = "disabled";
operating-points = <
/* kHz uV */
300000 650000
800000 700000
1500000 800000
1848000 1000000
>;
light,dvddm-operating-points = <
/* kHz uV */
300000 800000
800000 800000
1500000 800000
1848000 1000000
>;
};
c910_2: cpu@2 {
status = "disabled";
operating-points = <
/* kHz uV */
300000 650000
800000 700000
1500000 800000
1848000 1000000
>;
light,dvddm-operating-points = <
/* kHz uV */
300000 800000
800000 800000
1500000 800000
1848000 1000000
>;
};
c910_3: cpu@3 {
status = "disabled";
operating-points = <
/* kHz uV */
300000 650000
800000 700000
1500000 800000
1848000 1000000
>;
light,dvddm-operating-points = <
/* kHz uV */
300000 800000
800000 800000
1500000 800000
1848000 1000000
>;
};
};
&thermal_zones {
cpu-thermal-zone {
status = "disabled";
};
};
&dummy_clock_apb {
clock-frequency = <50000000>;
};
&uart0 {
clocks = <&dummy_clock_apb>;
};
&uart1 {
clocks = <&dummy_clock_apb>;
};
&uart2 {
clocks = <&dummy_clock_apb>;
};
&uart3 {
clocks = <&dummy_clock_apb>;
};
&uart4 {
clocks = <&dummy_clock_apb>;
};
&uart5 {
clocks = <&dummy_clock_apb>;
};
&usb3_drd {
status = "disabled";
};
&usb {
status = "disabled";
};
&dspsys_reg {
status = "disabled";
};
&audio_ioctrl {
status = "disabled";
};
&audio_cpr {
status = "disabled";
};
&timer0 {
clock-frequency = <50000000>;
};
&timer1 {
clock-frequency = <50000000>;
};
&timer2 {
clock-frequency = <50000000>;
};
&timer3 {
clock-frequency = <50000000>;
};
&g2d {
status = "disabled";
};
&vosys_reg {
status = "disabled";
};
&dmac2 {
status = "disabled";
};
&sdhci1 {
status = "disabled";
};
&pvt {
status = "disabled";
};
&audio_i2c0 {
status = "disabled";
};
&csia_reg {
status = "disabled";
};
&visys_clk_gate { /* VI_SYSREG_R */
status = "disabled";
};
&vpsys_clk_gate { /* VP_SYSREG_R */
status = "disabled";
};
&vosys_clk_gate { /* VO_SYSREG_R */
status = "disabled";
};
&dspsys_clk_gate {
status = "disabled";
};
&watchdog0 {
status = "disabled";
};
&watchdog1 {
status = "disabled";
};

File diff suppressed because it is too large Load Diff

View File

@@ -1,399 +0,0 @@
/dts-v1/;
/ {
model = "T-HEAD c910 ice";
compatible = "thead,c910_ice";
#address-cells = <2>;
#size-cells = <2>;
memory@0 {
device_type = "memory";
/*
* Total memory size: 4GB (0x00000000 0x100000000)
* 0x00200000 - 0x0e0000000: 3407MB for Linux system
* 0xe0000000 - 0x100000000: 512MB for GPU
*/
reg = <0x0 0x200000 0x0 0xdfe00000>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
timebase-frequency = <3000000>;
cpu@0 {
device_type = "cpu";
reg = <0>;
status = "okay";
compatible = "riscv";
riscv,isa = "rv64imafdcsu";
mmu-type = "riscv,sv39";
cpu-freq = "1.2Ghz";
cpu-icache = "64KB";
cpu-dcache = "64KB";
cpu-l2cache = "2MB";
cpu-tlb = "1024 4-ways";
cpu-cacheline = "64Bytes";
cpu-vector = "0.7.1";
cpu0_intc: interrupt-controller {
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
interrupt-controller;
};
};
cpu@1 {
device_type = "cpu";
reg = <1>;
status = "okay";
compatible = "riscv";
riscv,isa = "rv64imafdcsu";
mmu-type = "riscv,sv39";
cpu-freq = "1.2Ghz";
cpu-icache = "64KB";
cpu-dcache = "64KB";
cpu-l2cache = "2MB";
cpu-tlb = "1024 4-ways";
cpu-cacheline = "64Bytes";
cpu-vector = "0.7.1";
cpu1_intc: interrupt-controller {
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
interrupt-controller;
};
};
};
soc {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
ranges;
reset: reset-sample {
compatible = "thead,reset-sample";
plic-delegate = <0x3 0xf01ffffc>;
using-csr-reset;
csr-copy = <
0x7c0 0x7c1 0x7c2 0x7c3 0x7c5 0x7cc
0x3b0 0x3b1 0x3b2 0x3b3
0x3b4 0x3b5 0x3b6 0x3b7
0x3a0
>;
};
clint0: clint@3f4000000 {
compatible = "riscv,clint0";
interrupts-extended = <
&cpu0_intc 3 &cpu0_intc 7
&cpu1_intc 3 &cpu1_intc 7
>;
reg = <0x3 0xf4000000 0x0 0x04000000>;
clint,has-no-64bit-mmio;
};
intc: interrupt-controller@3f0000000 {
#interrupt-cells = <1>;
compatible = "riscv,plic0";
interrupt-controller;
interrupts-extended = <
&cpu0_intc 0xffffffff &cpu0_intc 9
&cpu1_intc 0xffffffff &cpu1_intc 9
>;
reg = <0x3 0xf0000000 0x0 0x04000000>;
reg-names = "control";
riscv,max-priority = <7>;
riscv,ndev = <80>;
};
dummy_apb: apb-clock {
compatible = "fixed-clock";
clock-frequency = <62500000>;
clock-output-names = "dummy_apb";
#clock-cells = <0>;
};
dummy_ahb: ahb-clock {
compatible = "fixed-clock";
clock-frequency = <250000000>;
clock-output-names = "dummy_ahb";
#clock-cells = <0>;
};
dummy_axi: axi-clock {
compatible = "fixed-clock";
clock-frequency = <500000000>;
clock-output-names = "dummy_axi";
#clock-cells = <0>;
};
dummy_gmac: gmac-clock {
compatible = "fixed-clock";
clock-frequency = <1000000000>;
clock-output-names = "dummy_gmac";
#clock-cells = <0>;
};
dummy_clk_sdio: dummy-clk-sdio {
compatible = "fixed-clock";
clock-frequency = <150000000>;
clock-output-names = "dummy_clk_sdio";
#clock-cells = <0>;
};
usb: dwc3@3fff10000 {
compatible = "snps,dwc3";
reg = <0x3 0xfff10000 0x0 0x10000>;
interrupt-parent = <&intc>;
interrupts = <44>;
clocks = <&dummy_ahb>, <&dummy_ahb>, <&dummy_ahb>;
clock-names = "ref", "bus_early", "suspend";
maximum-speed = "super-speed";
dr_mode = "peripheral";
snps,usb3_lpm_capable;
snps,dis_u3_susphy_quirk;
};
gpio0: gpio@3fff71000 {
compatible = "snps,dw-apb-gpio";
reg = <0x3 0xfff71000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
/* GPIO0[0-31] */
gpio0_porta: gpio0-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <27>;
};
/* GPIO0[32-63] */
gpio0_portb: gpio0-controller@1 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <1>;
};
};
gpio1: gpio@3fff72000 {
compatible = "snps,dw-apb-gpio";
reg = <0x3 0xfff72000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
/* GPIO1[0-31] */
gpio1_porta: gpio1-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <0>;
};
/* GPIO1[32-63] */
gpio1_portb: gpio1-controller@1 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <1>;
};
/* GPIO1[64-95] */
gpio1_portc: gpio1-controller@2 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <2>;
};
};
gpio-leds {
compatible = "gpio-leds";
led0 { /* GPIO0[11] - UART2_TXD */
label = "led0";
gpios = <&gpio0_porta 11 1>;
default-state = "off";
};
};
gpio-keys {
compatible = "gpio-keys";
/* autorepeat; */
key_0 { /* GPIO0[10] - UART2_RXD */
gpios = <&gpio0_porta 10 1>;
linux,code = <59>;
label = "key_0";
};
};
i2c@3fff74000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c-ice";
reg = <0x3 0xfff74000 0x0 0x1000>;
interrupts = <21>;
interrupt-parent = <&intc>;
clocks = <&dummy_apb>;
clock-frequency = <400000>;
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
pagesize = <32>;
};
goodix_ts@14 {
#gpio-cells = <2>;
compatible = "goodix,gt917s";
reg = <0x14>;
interrupt-parent = <&gpio0_porta>;
interrupts = <31 0>;
irq-gpios = <&gpio0_porta 31 0>;
reset-gpios = <&gpio0_porta 30 0>;
touchscreen-size-x = <720>;
touchscreen-size-y = <1280>;
};
};
serial@3fff73000 {
compatible = "snps,dw-apb-uart";
reg = <0x3 0xfff73000 0x0 0x400>;
interrupt-parent = <&intc>;
interrupts = <23>;
clocks = <&dummy_apb>;
clock-names = "baudclk";
reg-shift = <2>;
reg-io-width = <4>;
};
pmu: pmu {
interrupt-parent = <&cpu0_intc>;
interrupts = <17>;
compatible = "riscv,c910_pmu";
};
dmac0: dmac@3fffd0000 {
compatible = "snps,axi-dma-1.01a";
reg = <0x3 0xfffd0000 0x0 0x1000>;
interrupt-parent = <&intc>;
interrupts = <65>;
clocks = <&dummy_axi>, <&dummy_ahb>;
clock-names = "core-clk", "cfgr-clk";
dma-channels = <8>;
snps,block-size = <65536 65536 65536 65536 65536 65536 65536 65536>;
snps,priority = <0 1 2 3 4 5 6 7>;
snps,dma-masters = <1>;
snps,data-width = <4>;
snps,axi-max-burst-len = <16>;
status = "disabled";
};
sdhc0: sdhc0@3fffb0000 {
compatible = "snps,dw-mshc";
reg = <0x3 0xfffb0000 0x0 0x1000>;
interrupt-parent = <&intc>;
interrupts = <37>;
clocks = <&dummy_clk_sdio>, <&dummy_clk_sdio>;
clock-names = "ciu", "biu";
num-slots = <1>;
card-detect-delay = <200>;
cap-mmc-highspeed;
cap-cmd23;
non-removable;
bus-width = <8>;
};
sdhc1: sdhc1@3fffa0000 {
compatible = "snps,dw-mshc";
reg = <0x3 0xfffa0000 0x0 0x1000>;
interrupt-parent = <&intc>;
interrupts = <38>;
clocks = <&dummy_clk_sdio>, <&dummy_clk_sdio>;
clock-names = "ciu", "biu";
num-slots = <1>;
card-detect-delay = <200>;
cap-sd-highspeed;
bus-width = <4>;
};
stmmac_axi_setup: stmmac-axi-config {
snps,wr_osr_lmt = <3>;
snps,rd_osr_lmt = <3>;
snps,blen = <16 8 4 0 0 0 0>;
};
gmac: ethernet@3fffc0000 {
compatible = "thead,dwmac";
reg = < 0x3 0xfffc0000 0x0 0x2000
0x3 0xfe83025c 0x0 0x4
0x3 0xfe83031c 0x0 0x4
0x3 0xfff770c0 0x0 0x1c>;
reg-names = "gmac", "phy_if_reg", "txclk_dir_reg", "clk_mgr_reg";
interrupt-parent = <&intc>;
interrupts = <40>;
interrupt-names = "macirq";
clocks = <&dummy_ahb>, <&dummy_gmac>;
clock-names = "stmmaceth", "gmac_pll_clk";
snps,pbl = <32>;
snps,fixed-burst;
snps,axi-config = <&stmmac_axi_setup>;
phy-mode = "rgmii-id";
rx-clk-delay = <0x1f>; /* for RGMII */
tx-clk-delay = <0x1f>; /* for RGMII */
phy-handle = <&eth_phy_0>;
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
eth_phy_0: ethernet-phy@0 {
reg = <0>;
};
};
};
gpu: gpu@3fff27000 {
compatible = "verisilicon,gc8000ul";
reg = <0x3 0xfff27000 0x0 0x1000>;
interrupt-parent = <&intc>;
interrupts = <63>;
contiguous-base = <0x0 0xe0000000>;
contiguous-size = <0x0 0x20000000>;
};
watchdog: watchdog@3fffe3000 {
compatible = "ice,ice-wdt";
reg = <0x3 0xfffe3000 0x0 0x1000>;
interrupts = <20>;
};
dpu: dpu@3fff28000 {
compatible = "verisilicon,dc8000-fb";
reg = <0x3 0xfff28000 0x0 0x8000>;
interrupt-parent = <&intc>;
interrupts = <64>;
};
};
chosen {
/* bootargs = "console=ttyS0,115200 crashkernel=256M-:128M c910_mmu_v1"; */
/* linux,initrd-start = <0x2000000>; */
/* linux,initrd-end = <0x17000000>; */
bootargs = "console=ttyS0,115200 rdinit=/sbin/init root=/dev/mmcblk0p4 rw rootfstype=ext4 blkdevparts=mmcblk0:2M(table),2M(dtb),60M(kernel),-(rootfs) clk_ignore_unused loglevel=7 rootwait crashkernel=256M-:128M c910_mmu_v1";
stdout-path = "serial0@3fff73000:115200";
};
};

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-product.dts"
#include "light-powergate.dts"

File diff suppressed because it is too large Load Diff

View File

@@ -1,29 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "light-a-ref-dsi0.dts"
&dpu_enc1 {
ports {
/delete-node/ port@0;
};
};
&disp1_out {
remote-endpoint = <&hdmi_tx_in>;
};
&hdmi_tx {
status = "okay";
port@0 {
/* input */
hdmi_tx_in: endpoint {
remote-endpoint = <&disp1_out>;
};
};
};

View File

@@ -1,75 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "light-a-ref.dts"
/ {
display-subsystem {
status = "okay";
};
};
&dpu_enc0 {
status = "okay";
ports {
/* output */
port@1 {
reg = <1>;
enc0_out: endpoint {
remote-endpoint = <&dsi0_in>;
};
};
};
};
&dpu {
status = "okay";
};
&dsi0 {
status = "okay";
};
&dhost_0 {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi0_in: endpoint {
remote-endpoint = <&enc0_out>;
};
};
port@1 {
reg = <1>;
dsi0_out: endpoint {
remote-endpoint = <&panel0_in>;
};
};
};
panel0@0 {
compatible = "txd,dy800qwxpab";
reg = <0>;
backlight = <&lcd0_backlight>;
reset-gpio = <&gpio1_porta 5 1>; /* active low */
vdd1v8-supply = <&lcd0_1v8>;
vspn5v7-supply = <&lcd0_5v7>;
port {
panel0_in: endpoint {
remote-endpoint = <&dsi0_out>;
};
};
};
};

View File

@@ -1,5 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val.dts"

View File

@@ -1,111 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "light-a-val-dsi0.dts"
&dpu_enc1 {
ports {
/delete-node/ port@0;
};
};
&disp1_out {
remote-endpoint = <&hdmi_tx_in>;
};
&sdhci1 {
status = "okay";
};
&wcn_bt {
status = "okay";
};
&wcn_wifi {
status = "okay";
};
&lightsound {
status = "okay";
simple-audio-card,widgets =
"Microphone", "Mic Jack",
"Speaker", "Speaker",
"Headphone", "Headphone Jack";
simple-audio-card,routing =
"Headphone Jack", "HP_L",
"Headphone Jack", "HP_R",
"Speaker", "SPK_LP",
"Speaker", "SPK_LN",
"Speaker", "SPK_RP",
"Speaker", "SPK_RN",
"Mic Jack","MICB",
"LINPUT1", "Mic Jack",
"LINPUT3", "Mic Jack";
simple-audio-card,dai-link@0 { /* I2S - CODEC */
reg = <0>;
format = "i2s";
cpu {
sound-dai = <&light_i2s 0>;
};
codec {
sound-dai = <&codec>;
};
};
simple-audio-card,dai-link@1 { /* I2S - HDMI */
reg = <1>;
format = "i2s";
cpu {
sound-dai = <&light_i2s 1>;
};
codec {
sound-dai = <&dummy_codec>;
};
};
};
&light_i2s {
status = "okay";
};
&hdmi_tx {
status = "okay";
port@0 {
/* input */
hdmi_tx_in: endpoint {
remote-endpoint = <&disp1_out>;
};
};
};
/ {
firmware {
android {
compatible = "android,firmware";
boot_devices = "soc/ffe7080000.sdhci";
fstab {
compatible = "android,fstab";
system {
compatible = "android,system";
dev = "/dev/block/platform/soc/ffe7080000.sdhci/by-name/system";
type = "ext4";
mnt_flags = "ro,barrier=1";
fsmgr_flags = "wait";
};
vendor {
compatible = "android,vendor";
dev = "/dev/block/platform/soc/ffe7080000.sdhci/by-name/vendor";
type = "ext4";
mnt_flags = "ro,barrier=1";
fsmgr_flags = "wait";
};
};
};
};
};

View File

@@ -1,100 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-audio.dts"
/ {
model = "T-HEAD Light FM Audio VAL board";
compatible = "thead,light-val-audio-i2s-8ch", "thead,light";
};
&lightsound {
status = "okay";
simple-audio-card,dai-link@1 { /* I2S - AUDIO SYS CODEC 7210*/
reg = <1>;
format = "i2s";
cpu {
sound-dai = <&i2s_8ch_sd2 2>;
};
codec {
mclk-fs = <512>;
sound-dai = <&es7210_audio_codec_adc0>;
};
};
simple-audio-card,dai-link@2 { /* I2S - AUDIO SYS CODEC 7210*/
reg = <2>;
format = "i2s";
cpu {
sound-dai = <&i2s_8ch_sd3 3>;
};
codec {
mclk-fs = <512>;
sound-dai = <&es7210_audio_codec_adc0>;
};
};
simple-audio-card,dai-link@3 { /* I2S - AUDIO SYS CODEC 7210_1*/
reg = <3>;
format = "i2s";
cpu {
sound-dai = <&i2s_8ch_sd0 0>;
};
codec {
mclk-fs = <512>;
sound-dai = <&es7210_audio_codec_adc1>;
};
};
simple-audio-card,dai-link@4 { /* I2S - AUDIO SYS CODEC 7210_1*/
reg = <4>;
format = "i2s";
cpu {
sound-dai = <&i2s_8ch_sd1 1>;
};
codec {
mclk-fs = <512>;
sound-dai = <&es7210_audio_codec_adc1>;
};
};
};
&i2s_8ch_sd0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audiopa4>,
<&pinctrl_audio_i2s_8ch_sd0>,
<&pinctrl_audiopa2>,
<&pinctrl_audiopa3>,
<&pinctrl_audiopa8>,
<&pinctrl_audio_i2s_8ch_bus>;
};
&i2s_8ch_sd1 {
status = "okay";
};
&i2s_8ch_sd2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audiopa0>,
<&pinctrl_audio_i2s_8ch_sd2>;
};
&i2s_8ch_sd3 {
status = "okay";
};
&es7210_audio_codec_adc0 {
status = "okay";
channels-max = <8>;
};
&es7210_audio_codec_adc1 {
status = "okay";
channels-max = <8>;
};

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-audio.dts"
#include "light-powergate.dts"

View File

@@ -1,42 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val.dts"
&spdif0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audio_spdif0>;
status = "okay";
};
&spdif1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audio_spdif1>;
status = "okay";
};
&lightsound {
status = "okay";
simple-audio-card,dai-link@0 { /* SPDIF0 */
reg = <1>;
format = "i2s";
cpu {
sound-dai = <&spdif0>;
};
codec {
sound-dai = <&dummy_codec>;
};
};
simple-audio-card,dai-link@1 { /* SPDIF1 */
reg = <1>;
format = "i2s";
cpu {
sound-dai = <&spdif1>;
};
codec {
sound-dai = <&dummy_codec>;
};
};
};

View File

@@ -1,182 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val.dts"
&tdm_slot1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audio_tdm>;
status = "okay";
};
&tdm_slot2 {
status = "okay";
};
&tdm_slot3 {
status = "okay";
};
&tdm_slot4 {
status = "okay";
};
&tdm_slot5 {
status = "okay";
};
&tdm_slot6 {
status = "okay";
};
&tdm_slot7 {
status = "okay";
};
&tdm_slot8 {
status = "okay";
};
&audio_i2c0 {
clock-frequency = <100000>;
status = "okay";
es7210_adc2: es7210@42 {
#sound-dai-cells = <0>;
compatible = "MicArray_0";
reg = <0x42>;
work-mode = "ES7210_TDM_1LRCK_DSPB";
channels-max = <8>;
sound-name-prefix = "ES7210_ADC2";
MVDD-supply = <&soc_aud_adc_3v3_en_reg>;
AVDD-supply = <&soc_aud_adc_3v3_en_reg>;
DVDD-supply = <&soc_dvdd18_aon_reg>;
PVDD-supply = <&soc_dvdd18_aon_reg>;
};
es7210_adc3: es7210@43 {
#sound-dai-cells = <0>;
compatible = "MicArray_1";
reg = <0x43>;
work-mode = "ES7210_TDM_1LRCK_DSPB";
channels-max = <8>;
sound-name-prefix = "ES7210_ADC3";
MVDD-supply = <&soc_aud_adc_3v3_en_reg>;
AVDD-supply = <&soc_aud_adc_3v3_en_reg>;
DVDD-supply = <&soc_dvdd18_aon_reg>;
PVDD-supply = <&soc_dvdd18_aon_reg>;
};
};
&lightsound {
status = "okay";
simple-audio-card,widgets = "Speaker", "Speaker";
simple-audio-card,routing =
"AW87519 IN", "ES8156 ROUT",
"Speaker", "AW87519 VO";
simple-audio-card,aux-devs = <&audio_aw87519_pa>;
simple-audio-card,dai-link@0 { /* I2S - AUDIO SYS CODEC 8156*/
reg = <0>;
format = "i2s";
cpu {
sound-dai = <&i2s0 0>;
};
codec {
sound-dai = <&es8156_audio_codec>;
};
};
simple-audio-card,dai-link@1 { /* TDM - AUDIO SYS CODEC 7210*/
reg = <1>;
format = "dsp_b";
cpu {
sound-dai = <&tdm_slot1>;
};
codec {
sound-dai = <&es7210_adc2>;
};
};
simple-audio-card,dai-link@2 {
reg = <1>;
format = "dsp_b";
cpu {
sound-dai = <&tdm_slot2>;
};
codec {
sound-dai = <&es7210_adc2>;
};
};
simple-audio-card,dai-link@3 {
reg = <1>;
format = "dsp_b";
cpu {
sound-dai = <&tdm_slot3>;
};
codec {
sound-dai = <&es7210_adc2>;
};
};
simple-audio-card,dai-link@4 {
reg = <1>;
format = "dsp_b";
cpu {
sound-dai = <&tdm_slot4>;
};
codec {
sound-dai = <&es7210_adc2>;
};
};
simple-audio-card,dai-link@5 {
reg = <1>;
format = "dsp_b";
cpu {
sound-dai = <&tdm_slot5>;
};
codec {
sound-dai = <&es7210_adc2>;
};
};
simple-audio-card,dai-link@6 {
reg = <1>;
format = "dsp_b";
cpu {
sound-dai = <&tdm_slot6>;
};
codec {
sound-dai = <&es7210_adc2>;
};
};
simple-audio-card,dai-link@7 {
reg = <1>;
format = "dsp_b";
cpu {
sound-dai = <&tdm_slot7>;
};
codec {
sound-dai = <&es7210_adc2>;
};
};
simple-audio-card,dai-link@8 {
reg = <1>;
format = "dsp_b";
cpu {
sound-dai = <&tdm_slot8>;
};
codec {
sound-dai = <&es7210_adc2>;
};
};
};
&i2s0 {
status = "okay";
};

View File

@@ -1,55 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val.dts"
/ {
model = "T-HEAD Light FM Audio VAL board";
compatible = "thead,light-val-audio", "thead,light";
};
&lightsound {
status = "okay";
simple-audio-card,widgets = "Speaker", "Speaker";
simple-audio-card,routing =
"Speaker", "AW87519 VO",
"AW87519 IN", "ES8156 ROUT";
simple-audio-card,aux-devs = <&audio_aw87519_pa>;
simple-audio-card,dai-link@0 { /* I2S - AUDIO SYS CODEC 8156*/
reg = <0>;
format = "i2s";
cpu {
sound-dai = <&i2s0 0>;
};
codec {
sound-dai = <&es8156_audio_codec>;
};
};
simple-audio-card,dai-link@1 { /* I2S - AUDIO SYS CODEC 7210*/
reg = <1>;
format = "i2s";
cpu {
sound-dai = <&i2s_8ch_sd2 2>;
};
codec {
sound-dai = <&es7210_audio_codec_adc0>;
};
};
};
&i2s0 {
status = "okay";
};
&i2s_8ch_sd2 {
status = "okay";
};
&es7210_audio_codec_adc0 {
status = "okay";
};

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-ddr1G.dts"
#include "light-powergate.dts"

View File

@@ -1,21 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2022 Alibaba Group Holding Limited.
*/
#include "light-a-val-ddr2G.dts"
/ {
model = "T-HEAD Light VAL configuration for 1GB DDR board";
compatible = "thead,light-val", "thead,light-val-ddr1G", "thead,light";
memory@0 {
device_type = "memory";
reg = <0x0 0x200000 0x0 0x3fe00000>;
};
};
&cmamem {
size = <0 0x8c00000>; // 140MB by default
alloc-ranges = <0 0x02000000 0 0x0cc00000>; // [0x0600_0000 ~ 0x0EC0_0000]
};

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-ddr2G.dts"
#include "light-powergate.dts"

View File

@@ -1,25 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2022 Alibaba Group Holding Limited.
*/
#include "light-a-val.dts"
/ {
model = "T-HEAD Light VAL configuration for 2GB DDR board";
compatible = "thead,light-val", "thead,light-val-ddr2G", "thead,light";
memory@0 {
device_type = "memory";
reg = <0x0 0x200000 0x0 0x7fe00000>;
};
};
&cmamem {
alloc-ranges = <0 0x64000000 0 0x14000000>; // [0x6400_0000 ~ 0x7800_0000]
};
&facelib_mem {
reg = <0x0 0x22000000 0 0x02000000>;
no-map;
};

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-dpi0-dpi1.dts"
#include "light-powergate.dts"

View File

@@ -1,40 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2022 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "light-a-val-dpi0.dts"
/ {
dpi_panel1: dpi-panel@1 {
compatible = "light,dummy-panel";
port {
dpi1_in: endpoint {
remote-endpoint = <&enc1_out>;
};
};
};
};
&dpu_enc1 {
compatible = "verisilicon,dpi-encoder";
status = "okay";
ports {
/* output */
port@1 {
reg = <1>;
enc1_out: endpoint {
remote-endpoint = <&dpi1_in>;
};
};
};
};
&dpu {
status = "okay";
};

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-dpi0.dts"
#include "light-powergate.dts"

View File

@@ -1,44 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2022 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "light-a-val.dts"
/ {
display-subsystem {
status = "okay";
};
dpi_panel0: dpi-panel@0 {
compatible = "light,dummy-panel";
port {
dpi0_in: endpoint {
remote-endpoint = <&enc0_out>;
};
};
};
};
&dpu_enc0 {
compatible = "verisilicon,dpi-encoder";
status = "okay";
ports {
/* output */
port@1 {
reg = <1>;
enc0_out: endpoint {
remote-endpoint = <&dpi0_in>;
};
};
};
};
&dpu {
status = "okay";
};

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-dsi0-dsi1.dts"
#include "light-powergate.dts"

View File

@@ -1,64 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "light-a-val-dsi0.dts"
&dpu_enc1 {
status = "okay";
ports {
/* output */
port@1 {
reg = <1>;
enc1_out: endpoint {
remote-endpoint = <&dsi1_in>;
};
};
};
};
&dsi1 {
status = "okay";
};
&dhost_1 {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi1_in: endpoint {
remote-endpoint = <&enc1_out>;
};
};
port@1 {
reg = <1>;
dsi1_out: endpoint {
remote-endpoint = <&panel1_in>;
};
};
};
panel1@0 {
compatible = "txd,dy800qwxpab";
reg = <0>;
reset-gpio = <&gpio1_porta 9 1>; /* active low */
vdd1v8-supply = <&lcd1_1v8>;
vspn5v7-supply = <&lcd1_5v7>;
port {
panel1_in: endpoint {
remote-endpoint = <&dsi1_out>;
};
};
};
};

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-dsi0-hdmi.dts"
#include "light-powergate.dts"

View File

@@ -1,29 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "light-a-val-dsi0.dts"
&dpu_enc1 {
ports {
/delete-node/ port@0;
};
};
&disp1_out {
remote-endpoint = <&hdmi_tx_in>;
};
&hdmi_tx {
status = "okay";
port@0 {
/* input */
hdmi_tx_in: endpoint {
remote-endpoint = <&disp1_out>;
};
};
};

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-dsi0.dts"
#include "light-powergate.dts"

View File

@@ -1,75 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "light-a-val.dts"
/ {
display-subsystem {
status = "okay";
};
};
&dpu_enc0 {
status = "okay";
ports {
/* output */
port@1 {
reg = <1>;
enc0_out: endpoint {
remote-endpoint = <&dsi0_in>;
};
};
};
};
&dpu {
status = "okay";
};
&dsi0 {
status = "okay";
};
&dhost_0 {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi0_in: endpoint {
remote-endpoint = <&enc0_out>;
};
};
port@1 {
reg = <1>;
dsi0_out: endpoint {
remote-endpoint = <&panel0_in>;
};
};
};
panel0@0 {
compatible = "txd,dy800qwxpab";
reg = <0>;
backlight = <&lcd0_backlight>;
reset-gpio = <&gpio1_porta 5 1>; /* active low */
vdd1v8-supply = <&lcd0_1v8>;
vspn5v7-supply = <&lcd0_5v7>;
port {
panel0_in: endpoint {
remote-endpoint = <&dsi0_out>;
};
};
};
};

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-dsi1.dts"
#include "light-powergate.dts"

View File

@@ -1,75 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "light-a-val.dts"
/ {
display-subsystem {
status = "okay";
};
};
&dpu_enc1 {
status = "okay";
ports {
/* output */
port@1 {
reg = <1>;
enc1_out: endpoint {
remote-endpoint = <&dsi1_in>;
};
};
};
};
&dpu {
status = "okay";
};
&dsi1 {
status = "okay";
};
&dhost_1 {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi1_in: endpoint {
remote-endpoint = <&enc1_out>;
};
};
port@1 {
reg = <1>;
dsi1_out: endpoint {
remote-endpoint = <&panel1_in>;
};
};
};
panel1@0 {
compatible = "txd,dy800qwxpab";
reg = <0>;
backlight = <&lcd1_backlight>;
reset-gpio = <&gpio1_porta 9 1>; /* active low */
vdd1v8-supply = <&lcd1_1v8>;
vspn5v7-supply = <&lcd1_5v7>;
port {
panel1_in: endpoint {
remote-endpoint = <&dsi1_out>;
};
};
};
};

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-dsp0-dsp1.dts"
#include "light-powergate.dts"

View File

@@ -1,13 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "light-a-val.dts"
&xtensa_dsp1 {
status = "okay";
};

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-full.dts"
#include "light-powergate.dts"

View File

@@ -1,169 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2022 Alibaba Group Holding Limited.
*/
#include "light-a-val.dts"
/ {
display-subsystem {
status = "okay";
};
};
&dpu_enc0 {
status = "okay";
ports {
/* output */
port@1 {
reg = <1>;
enc0_out: endpoint {
remote-endpoint = <&dsi0_in>;
};
};
};
};
&dpu_enc1 {
ports {
/delete-node/ port@0;
};
};
&dpu {
status = "okay";
};
&dsi0 {
status = "okay";
};
&dhost_0 {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi0_in: endpoint {
remote-endpoint = <&enc0_out>;
};
};
port@1 {
reg = <1>;
dsi0_out: endpoint {
remote-endpoint = <&panel0_in>;
};
};
};
panel0@0 {
compatible = "txd,dy800qwxpab";
reg = <0>;
backlight = <&lcd0_backlight>;
reset-gpio = <&gpio1_porta 5 1>; /* active low */
vdd1v8-supply = <&lcd0_1v8>;
vspn5v7-supply = <&lcd0_5v7>;
port {
panel0_in: endpoint {
remote-endpoint = <&dsi0_out>;
};
};
};
};
&disp1_out {
remote-endpoint = <&hdmi_tx_in>;
};
&hdmi_tx {
status = "okay";
port@0 {
/* input */
hdmi_tx_in: endpoint {
remote-endpoint = <&disp1_out>;
};
};
};
&lightsound {
status = "okay";
simple-audio-card,widgets = "Speaker", "Speaker";
simple-audio-card,routing =
"Speaker", "AW87519 VO",
"AW87519 IN", "ES8156 ROUT";
simple-audio-card,aux-devs = <&audio_aw87519_pa>;
simple-audio-card,dai-link@0 { /* I2S - AUDIO SYS CODEC 8156*/
reg = <0>;
format = "i2s";
cpu {
sound-dai = <&i2s0 0>;
};
codec {
sound-dai = <&es8156_audio_codec>;
};
};
simple-audio-card,dai-link@1 { /* I2S - AUDIO SYS CODEC 7210*/
reg = <1>;
format = "i2s";
cpu {
sound-dai = <&i2s_8ch_sd2 2>;
};
codec {
sound-dai = <&es7210_audio_codec_adc0>;
};
};
};
&light_i2s {
status = "okay";
};
&i2s0 {
status = "okay";
};
&i2s_8ch_sd2 {
status = "okay";
};
&es7210_audio_codec_adc0 {
status = "okay";
};
&qspi0 {
status = "okay";
};
&qspi1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart3 {
status = "okay";
};
&sdhci1 {
status = "okay";
};
&wcn_bt {
status = "okay";
};
&wcn_wifi {
status = "okay";
};

View File

@@ -1,15 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val.dts"
/ {
model = "T-HEAD Light FM GPIO-KEYS VAL board";
compatible = "thead,light-val-gpio-keys", "thead,light";
};
&gpio_keys {
status = "okay";
};

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-hdmi.dts"
#include "light-powergate.dts"

View File

@@ -1,58 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "light-a-val.dts"
/ {
display-subsystem {
status = "okay";
};
};
&dpu_enc1 {
ports {
/delete-node/ port@0;
};
};
&disp1_out {
remote-endpoint = <&hdmi_tx_in>;
};
&dpu {
status = "okay";
};
&hdmi_tx {
status = "okay";
port@0 {
/* input */
hdmi_tx_in: endpoint {
remote-endpoint = <&disp1_out>;
};
};
};
&lightsound {
status = "okay";
simple-audio-card,dai-link@1 { /* I2S - HDMI */
reg = <1>;
format = "i2s";
cpu {
sound-dai = <&light_i2s 1>;
};
codec {
sound-dai = <&dummy_codec>;
};
};
};
&light_i2s {
status = "okay";
};

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-iso7816.dts"
#include "light-powergate.dts"

View File

@@ -1,10 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val.dts"
&iso7816 {
status = "okay";
};

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-khv.dts"
#include "light-powergate.dts"

View File

@@ -1,21 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val.dts"
&resmem {
#address-cells = <2>;
#size-cells = <2>;
ranges;
/* 512M for guest memory */
guestmem: memory@50000000 {
reg = <0x0 0x50000000 0x0 0x20000000>;
};
};
&khvhost {
memory-region = <&guestmem>;
};

View File

@@ -1,149 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "light-a-val.dts"
/ {
display-subsystem {
status = "okay";
};
};
&dpu_enc0 {
status = "okay";
ports {
/* output */
port@1 {
reg = <1>;
enc0_out: endpoint {
remote-endpoint = <&dsi0_in>;
};
};
};
};
&dpu {
status = "okay";
};
&dsi0 {
status = "okay";
};
&dhost_0 {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi0_in: endpoint {
remote-endpoint = <&enc0_out>;
};
};
port@1 {
reg = <1>;
dsi0_out: endpoint {
remote-endpoint = <&panel0_in>;
};
};
};
panel0@0 {
compatible = "txd,dy800qwxpab";
reg = <0>;
backlight = <&lcd0_backlight>;
reset-gpio = <&gpio1_porta 5 1>; /* active low */
vdd1v8-supply = <&lcd0_1v8>;
vspn5v7-supply = <&lcd0_5v7>;
port {
panel0_in: endpoint {
remote-endpoint = <&dsi0_out>;
};
};
};
};
&padctrl_audiosys {
status = "okay";
light-audio-padctrl {
/*
* Pin Configuration Node:
* Format: <pin_id mux_node config>
*/
pinctrl_audio_i2s_8ch: audio_i2s_8ch_grp {
thead,pins = <
FM_AUDIO_IO_PA0 0x2 0x008
FM_AUDIO_IO_PA2 0x2 0x008
FM_AUDIO_IO_PA3 0x2 0x008
FM_AUDIO_IO_PA8 0x2 0x008
>;
};
};
};
&lightsound {
status = "okay";
simple-audio-card,dai-link@0 { /* I2S - AUDIO SYS CODEC 8156*/
reg = <0>;
format = "i2s";
cpu {
sound-dai = <&i2s0 0>;
};
codec {
sound-dai = <&es8156_audio_codec>;
};
};
simple-audio-card,dai-link@1 { /* I2S - AUDIO SYS CODEC 7210*/
reg = <1>;
format = "i2s";
cpu {
sound-dai = <&i2s_8ch_sd2 2>;
};
codec {
sound-dai = <&es7210_audio_codec_adc0>;
};
};
};
&light_i2s {
status = "okay";
};
&i2s0 {
status = "okay";
};
&i2s_8ch_sd2 {
status = "okay";
};
&es7210_audio_codec_adc0 {
status = "okay";
};
&sdhci1 {
status = "okay";
};
&wcn_bt {
status = "okay";
};
&wcn_wifi {
status = "okay";
};

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-miniapp-hdmi.dts"
#include "light-powergate.dts"

View File

@@ -1,94 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "light-a-val.dts"
/ {
display-subsystem {
status = "okay";
};
};
&dpu_enc1 {
ports {
/delete-node/ port@0;
};
};
&disp1_out {
remote-endpoint = <&hdmi_tx_in>;
};
&dpu {
status = "okay";
};
&hdmi_tx {
status = "okay";
port@0 {
/* input */
hdmi_tx_in: endpoint {
remote-endpoint = <&disp1_out>;
};
};
};
&lightsound {
status = "okay";
simple-audio-card,dai-link@0 { /* I2S - AUDIO SYS CODEC 8156*/
reg = <0>;
format = "i2s";
cpu {
sound-dai = <&i2s0 0>;
};
codec {
sound-dai = <&es8156_audio_codec>;
};
};
simple-audio-card,dai-link@1 { /* I2S - AUDIO SYS CODEC 7210*/
reg = <1>;
format = "i2s";
cpu {
sound-dai = <&i2s_8ch_sd2 2>;
};
codec {
sound-dai = <&es7210_audio_codec_adc0>;
};
};
};
&light_i2s {
status = "okay";
};
&i2s0 {
status = "okay";
};
&i2s_8ch_sd2 {
status = "okay";
};
&es7210_audio_codec_adc0 {
status = "okay";
};
&sdhci1 {
status = "okay";
};
&wcn_bt {
status = "okay";
};
&wcn_wifi {
status = "okay";
};

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-nand.dts"
#include "light-powergate.dts"

View File

@@ -1,14 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val.dts"
&qspi0 {
status = "okay";
};
&qspi1 {
status = "okay";
};

View File

@@ -1,12 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-npu-fce.dts"
#include "light-powergate.dts"
&npu {
power-domains = <&pd LIGHT_AON_NPU_PD>;
};

View File

@@ -1,28 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val.dts"
/ {
model = "T-HEAD Light FM NPU&FCE on VAL board";
compatible = "thead,light-val-npu-fce", "thead,light";
};
&facelib_mem {
reg = <0x0 0xd0000000 0 0x20000000>;
no-map;
};
&npu {
vha_clk_rate = <1000000000>;
status = "okay";
};
&fce {
memory-region = <&facelib_mem>;
status = "okay";
};

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val.dts"
#include "light-powergate.dts"

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-sec.dts"
#include "light-powergate.dts"

View File

@@ -1,17 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "light-a-val-audio-hdmi.dts"
&light_iopmp {
status = "disabled";
};
&qspi1 {
status = "disabled";
};

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-sv.dts"
#include "light-powergate.dts"

File diff suppressed because it is too large Load Diff

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-a-val-wcn.dts"
#include "light-powergate.dts"

View File

@@ -1,20 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "light-a-val.dts"
&sdhci1 {
status = "okay";
};
&wcn_bt {
status = "okay";
};
&wcn_wifi {
status = "okay";
};

View File

@@ -1,88 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2022 Alibaba Group Holding Limited.
*/
#include "light-crash.dts"
&aon {
aon_reg_dialog: light-dialog-reg {
compatible = "thead,light-dialog-pmic-ant";
status = "okay";
dvdd_cpu_reg: appcpu_dvdd {
regulator-name = "appcpu_dvdd";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1570000>;
regulator-boot-on;
regulator-always-on;
};
dvddm_cpu_reg: appcpu_dvddm {
regulator-name = "appcpu_dvddm";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1570000>;
regulator-boot-on;
regulator-always-on;
};
};
};
&cpus {
c910_0: cpu@0 {
operating-points = <
/* kHz uV */
300000 720000
800000 720000
1500000 820000
>;
light,dvddm-operating-points = <
/* kHz uV */
300000 770000
800000 820000
1500000 820000
>;
};
c910_1: cpu@1 {
operating-points = <
/* kHz uV */
300000 720000
800000 720000
1500000 820000
>;
light,dvddm-operating-points = <
/* kHz uV */
300000 770000
800000 820000
1500000 820000
>;
};
c910_2: cpu@2 {
operating-points = <
/* kHz uV */
300000 720000
800000 720000
1500000 820000
>;
light,dvddm-operating-points = <
/* kHz uV */
300000 770000
800000 820000
1500000 820000
>;
};
c910_3: cpu@3 {
operating-points = <
/* kHz uV */
300000 720000
800000 720000
1500000 820000
>;
light,dvddm-operating-points = <
/* kHz uV */
300000 770000
800000 820000
1500000 820000
>;
};
};

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

View File

@@ -1,134 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "light-b-product.dts"
&aon {
/delete-node/light-ricoh-reg;
soc_vdd18_lcd0_bk_en_reg: soc_vdd18_lcd0_bk_en {
compatible = "regulator-fixed";
regulator-name = "soc_vdd18_lcd0_bk_en";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio1_porta 9 1>;
enable-active-high;
};
aon_reg_dialog: light-dialog-reg {
compatible = "thead,light-dialog-pmic-ant";
status = "okay";
dvdd_cpu_reg: appcpu_dvdd {
regulator-name = "appcpu_dvdd";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1570000>;
regulator-boot-on;
regulator-always-on;
};
dvddm_cpu_reg: appcpu_dvddm {
regulator-name = "appcpu_dvddm";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1570000>;
regulator-boot-on;
regulator-always-on;
};
soc_dvdd18_aon_reg: soc_dvdd18_aon {
regulator-name = "soc_dvdd18_aon";
regulator-boot-on;
regulator-always-on;
};
soc_avdd33_usb3_reg: soc_avdd33_usb3 {
regulator-name = "soc_avdd33_usb3";
regulator-boot-on;
regulator-always-on;
};
soc_dvdd08_aon_reg: soc_dvdd08_aon {
regulator-name = "soc_dvdd08_aon";
regulator-boot-on;
regulator-always-on;
};
soc_dvdd08_ddr_reg: soc_dvdd08_ddr {
regulator-name = "soc_dvdd08_ddr";
regulator-boot-on;
regulator-always-on;
};
soc_vdd_ddr_1v8_reg: soc_vdd_ddr_1v8 {
regulator-name = "soc_vdd_ddr_1v8";
regulator-boot-on;
regulator-always-on;
};
soc_vdd_ddr_1v1_reg: soc_vdd_ddr_1v1 {
regulator-name = "soc_vdd_ddr_1v1";
regulator-boot-on;
regulator-always-on;
};
soc_vdd_ddr_0v6_reg: soc_vdd_ddr_0v6 {
regulator-name = "soc_vdd_ddr_0v6";
regulator-boot-on;
regulator-always-on;
};
soc_dvdd18_ap_reg: soc_dvdd18_ap {
regulator-name = "soc_dvdd18_ap";
regulator-boot-on;
regulator-always-on;
};
soc_avdd08_mipi_hdmi_reg: soc_avdd08_mipi_hdmi {
regulator-name = "soc_avdd08_mipi_hdmi";
regulator-boot-on;
regulator-always-on;
};
soc_avdd18_mipi_hdmi_reg: soc_avdd18_mipi_hdmi {
regulator-name = "soc_avdd18_mipi_hdmi";
regulator-boot-on;
regulator-always-on;
};
soc_vdd33_emmc_reg: soc_vdd33_emmc {
regulator-name = "soc_vdd33_emmc";
regulator-boot-on;
regulator-always-on;
};
soc_vdd18_emmc_reg: soc_vdd18_emmc {
regulator-name = "soc_vdd18_emmc";
regulator-boot-on;
regulator-always-on;
};
#if 0
soc_dovdd18_scan_reg: soc_dovdd18_scan {
regulator-name = "soc_dovdd18_scan";
};
soc_dvdd12_scan_reg: soc_dvdd12_scan {
regulator-name = "soc_dvdd12_scan";
};
soc_avdd28_scan_en_reg: soc_avdd28_scan_en {
regulator-name = "soc_avdd28_scan_en";
};
#endif
};
};
&panel0 {
vdd1v8-supply = <&soc_vdd18_lcd0_bk_en_reg>;
};

View File

@@ -1,14 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-b-product-ddr1G.dts"
#include "light-powergate.dts"
&soc_vdd18_lcd0_en_reg {
/delete-property/regulator-always-on;
};
&soc_lcd0_bias_en_reg {
/delete-property/regulator-always-on;
};

View File

@@ -1,21 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2022 Alibaba Group Holding Limited.
*/
#include "light-b-product.dts"
/ {
model = "T-HEAD Light-B VAL configuration for 1GB DDR board";
compatible = "thead,light-val", "thead,light-val-ddr1G", "thead,light";
memory@0 {
device_type = "memory";
reg = <0x0 0x200000 0x0 0x3fe00000>;
};
};
&cmamem {
size = <0 0x8c00000>; // 140MB by default
alloc-ranges = <0 0x02000000 0 0x0cc000000>; // [0x0600_0000 ~ 0x0EC0_0000]
};

View File

@@ -1,28 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "light-b-product.dts"
&dpu_enc0 {
status = "disabled";
};
&dsi0 {
status = "disabled";
};
&dhost_0 {
status = "disabled";
};
&wcn_bt {
status = "okay";
};
&wcn_wifi {
status = "okay";
};

View File

@@ -1,16 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-b-product.dts"
#include "light-powergate.dts"
&soc_vdd18_lcd0_en_reg {
/delete-property/regulator-always-on;
};
&soc_lcd0_bias_en_reg {
/delete-property/regulator-always-on;
};

View File

@@ -1,8 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-b-product-sec.dts"
#include "light-powergate.dts"

File diff suppressed because it is too large Load Diff

View File

@@ -1,134 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "light-b-product.dts"
&aon {
/delete-node/light-ricoh-reg;
soc_vdd18_lcd0_bk_en_reg: soc_vdd18_lcd0_bk_en {
compatible = "regulator-fixed";
regulator-name = "soc_vdd18_lcd0_bk_en";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio1_porta 9 1>;
enable-active-high;
};
aon_reg_dialog: light-dialog-reg {
compatible = "thead,light-dialog-pmic-ant";
status = "okay";
dvdd_cpu_reg: appcpu_dvdd {
regulator-name = "appcpu_dvdd";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1570000>;
regulator-boot-on;
regulator-always-on;
};
dvddm_cpu_reg: appcpu_dvddm {
regulator-name = "appcpu_dvddm";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1570000>;
regulator-boot-on;
regulator-always-on;
};
soc_dvdd18_aon_reg: soc_dvdd18_aon {
regulator-name = "soc_dvdd18_aon";
regulator-boot-on;
regulator-always-on;
};
soc_avdd33_usb3_reg: soc_avdd33_usb3 {
regulator-name = "soc_avdd33_usb3";
regulator-boot-on;
regulator-always-on;
};
soc_dvdd08_aon_reg: soc_dvdd08_aon {
regulator-name = "soc_dvdd08_aon";
regulator-boot-on;
regulator-always-on;
};
soc_dvdd08_ddr_reg: soc_dvdd08_ddr {
regulator-name = "soc_dvdd08_ddr";
regulator-boot-on;
regulator-always-on;
};
soc_vdd_ddr_1v8_reg: soc_vdd_ddr_1v8 {
regulator-name = "soc_vdd_ddr_1v8";
regulator-boot-on;
regulator-always-on;
};
soc_vdd_ddr_1v1_reg: soc_vdd_ddr_1v1 {
regulator-name = "soc_vdd_ddr_1v1";
regulator-boot-on;
regulator-always-on;
};
soc_vdd_ddr_0v6_reg: soc_vdd_ddr_0v6 {
regulator-name = "soc_vdd_ddr_0v6";
regulator-boot-on;
regulator-always-on;
};
soc_dvdd18_ap_reg: soc_dvdd18_ap {
regulator-name = "soc_dvdd18_ap";
regulator-boot-on;
regulator-always-on;
};
soc_avdd08_mipi_hdmi_reg: soc_avdd08_mipi_hdmi {
regulator-name = "soc_avdd08_mipi_hdmi";
regulator-boot-on;
regulator-always-on;
};
soc_avdd18_mipi_hdmi_reg: soc_avdd18_mipi_hdmi {
regulator-name = "soc_avdd18_mipi_hdmi";
regulator-boot-on;
regulator-always-on;
};
soc_vdd33_emmc_reg: soc_vdd33_emmc {
regulator-name = "soc_vdd33_emmc";
regulator-boot-on;
regulator-always-on;
};
soc_vdd18_emmc_reg: soc_vdd18_emmc {
regulator-name = "soc_vdd18_emmc";
regulator-boot-on;
regulator-always-on;
};
#if 0
soc_dovdd18_scan_reg: soc_dovdd18_scan {
regulator-name = "soc_dovdd18_scan";
};
soc_dvdd12_scan_reg: soc_dvdd12_scan {
regulator-name = "soc_dvdd12_scan";
};
soc_avdd28_scan_en_reg: soc_avdd28_scan_en {
regulator-name = "soc_avdd28_scan_en";
};
#endif
};
};
&panel0 {
vdd1v8-supply = <&soc_vdd18_lcd0_bk_en_reg>;
};

View File

@@ -1,705 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
* Copyright (C) 2024 ISCAS.
*/
/dts-v1/;
#include "light-beagle-ref.dts"
&vvcam_sensor4 { // beagle board J5 CSI0 connector
sensor_name = "IMX219";
sensor_pdn = <&gpio2_porta 23 0>; //powerdown pin / shutdown pin
sensor_pdn_delay_us = <2000>; //powerdown pin / shutdown pin actived till I2C ready
i2c_addr = /bits/ 8 <0x10>;
i2c_bus = /bits/ 8 <1>;
i2c_reg_width = /bits/ 8 <2>;
i2c_data_width = /bits/ 8 <1>;
status = "okay";
};
&vvcam_sensor5 { // beagle board J4 CSI1 connector
sensor_name = "IMX219";
sensor_pdn = <&gpio2_porta 24 0>; //powerdown pin / shutdown pin
sensor_pdn_delay_us = <2000>; //powerdown pin / shutdown pin actived till I2C ready
i2c_addr = /bits/ 8 <0x10>;
i2c_bus = /bits/ 8 <3>;
i2c_reg_width = /bits/ 8 <2>;
i2c_data_width = /bits/ 8 <1>;
status = "okay";
};
/*
sensor imx219 mounted on beagle board J4 CSI1 (=light CSI2X2_A+CSI2X2_B / CSI2X2_A only)
video0: sensor-vipre-isp0
video1: sensor-vipre-isp0-dw
video7: sensor-vipre-isp0-dsp1-ry-dw
video10: tuningtool
sensor imx219 mounted on beagle board J5 CSI0 (=light CSI2)
video2: sensor-vipre-isp1
video3: sensor-vipre-isp1-dw
video4: sensor-vipre-isp1-dsp0-ry
video5: sensor-vipre-isp1-dsp0-ry-dw
video12: tuningtool
*/
&video0{
vi_mem_pool_region = <0xFFFFFFFF>; // vi_mem: framebuffer, region[2]
channel0 {
sensor0 {
subdev_name = "vivcam";
idx = <5>; // imx219
csi_idx = <2>; //<2>=CSI2X2_A
mode_idx = <0>;
path_type = "SENSOR_1080P_RAW10_LINER";
};
sensor1 {
subdev_name = "vivcam";
idx = <0xff>; // invalid
csi_idx = <0xff>;
path_type = "SENSOR_VGA_RAW10_LINER";
};
dma {
subdev_name = "vipre";
idx = <0>;
path_type = "VIPRE_CSI2_ISP0";
};
isp {
subdev_name = "isp";
idx = <0>;
path_type = "ISP_MI_PATH_MP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <16>;
frame_count = <3>;
};
};
};
channel1 {
sensor0 {
subdev_name = "vivcam";
idx = <5>; // imx219
csi_idx = <2>; //<2>=CSI2X2_A
mode_idx = <0>;
path_type = "SENSOR_1080P_RAW10_LINER";
};
sensor1 {
subdev_name = "vivcam";
idx = <0xff>; // invalid
csi_idx = <0xff>;
path_type = "SENSOR_VGA_RAW10_LINER";
};
dma {
subdev_name = "vipre";
idx = <0>;
path_type = "VIPRE_CSI2_ISP0";
};
isp {
subdev_name = "isp";
idx = <0>;
path_type = "ISP_MI_PATH_SP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <16>;
frame_count = <3>;
};
};
};
channel2 {
sensor0 {
subdev_name = "vivcam";
idx = <5>; // imx219
csi_idx = <2>; //<2>=CSI2X2_A
mode_idx = <0>;
path_type = "SENSOR_1080P_RAW10_LINER";
};
sensor1 {
subdev_name = "vivcam";
idx = <0xff>; // invalid
csi_idx = <0xff>;
path_type = "SENSOR_VGA_RAW10_LINER";
};
dma {
subdev_name = "vipre";
idx = <0>;
path_type = "VIPRE_CSI2_ISP0";
};
isp {
subdev_name = "isp";
idx = <0>;
path_type = "ISP_MI_PATH_SP2_BP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <16>;
frame_count = <3>;
};
};
};
};
&video2 {
vi_mem_pool_region = <0>; // vi_mem: framebuffer, region[0]
status = "okay";
channel0 {
channel_id = <0>;
status = "okay";
sensor0 {
subdev_name = "vivcam";
idx = <4>; // imx219
csi_idx = <0>; //<0>=CSI2
mode_idx = <0>;
path_type = "SENSOR_1080P_RAW10_LINER";
};
sensor1 {
subdev_name = "vivcam";
idx = <0xff>; // invalid
csi_idx = <0xff>;
path_type = "SENSOR_VGA_RAW10_LINER";
};
dma {
subdev_name = "vipre";
idx = <0>;
path_type = "VIPRE_CSI0_ISP1";
};
isp {
subdev_name = "isp";
idx = <1>;
path_type = "ISP_MI_PATH_MP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <16>;
frame_count = <3>;
};
};
};
channel1 {
channel_id = <1>;
status = "okay";
sensor0 {
subdev_name = "vivcam";
idx = <4>; // imx219
csi_idx = <0>; //<0>=CSI2
mode_idx = <0>;
path_type = "SENSOR_1080P_RAW10_LINER";
};
sensor1 {
subdev_name = "vivcam";
idx = <0xff>; // invalid
csi_idx = <0xff>;
path_type = "SENSOR_VGA_RAW10_LINER";
};
dma {
subdev_name = "vipre";
idx = <0>;
path_type = "VIPRE_CSI0_ISP1";
};
isp {
subdev_name = "isp";
idx = <1>;
path_type = "ISP_MI_PATH_SP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <16>;
frame_count = <3>;
};
};
};
channel2 {
channel_id = <2>;
status = "okay";
sensor0 {
subdev_name = "vivcam";
idx = <4>; // imx219
csi_idx = <0>; //<0>=CSI2
mode_idx = <0>;
path_type = "SENSOR_1080P_RAW10_LINER";
};
sensor1 {
subdev_name = "vivcam";
idx = <0xff>; // invalid
csi_idx = <0xff>;
path_type = "SENSOR_VGA_RAW10_LINER";
};
dma {
subdev_name = "vipre";
idx = <0>;
path_type = "VIPRE_CSI0_ISP1";
};
isp {
subdev_name = "isp";
idx = <1>;
path_type = "ISP_MI_PATH_SP2_BP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <16>;
frame_count = <3>;
};
};
};
};
&video3{
vi_mem_pool_region = <0>; // vi_mem: framebuffer, region[0]
channel0 {
sensor0 {
subdev_name = "vivcam";
idx = <4>; // imx219
csi_idx = <0>; //<0>=CSI2
mode_idx = <0>;
path_type = "SENSOR_1080P_RAW10_LINER";
};
sensor1 {
subdev_name = "vivcam";
idx = <0xff>; // invalid
csi_idx = <0xff>;
path_type = "SENSOR_VGA_RAW10_LINER";
};
dma {
subdev_name = "vipre";
idx = <0>;
path_type = "VIPRE_CSI0_ISP1";
};
isp {
subdev_name = "isp";
idx = <1>;
path_type = "ISP_MI_PATH_MP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
dw {
subdev_name = "dw";
idx = <0>;
path_type = "DW_DWE_VSE0";
dw_dst_depth = <2>;
};
};
channel1 {
sensor0 {
subdev_name = "vivcam";
idx = <4>; // imx219
csi_idx = <0>; //<0>=CSI2
mode_idx = <0>;
path_type = "SENSOR_1080P_RAW10_LINER";
};
sensor1 {
subdev_name = "vivcam";
idx = <0xff>; // invalid
csi_idx = <0xff>;
path_type = "SENSOR_VGA_RAW10_LINER";
};
dma {
subdev_name = "vipre";
idx = <0>;
path_type = "VIPRE_CSI0_ISP1";
};
isp {
subdev_name = "isp";
idx = <1>;
path_type = "ISP_MI_PATH_MP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
dw {
subdev_name = "dw";
idx = <0>;
path_type = "DW_DWE_VSE1";
dw_dst_depth = <2>;
};
};
channel2 {
sensor0 {
subdev_name = "vivcam";
idx = <4>; // imx219
csi_idx = <0>; //<0>=CSI2
mode_idx = <0>;
path_type = "SENSOR_1080P_RAW10_LINER";
};
sensor1 {
subdev_name = "vivcam";
idx = <0xff>; // invalid
csi_idx = <0xff>;
path_type = "SENSOR_VGA_RAW10_LINER";
};
dma {
subdev_name = "vipre";
idx = <0>;
path_type = "VIPRE_CSI0_ISP1";
};
isp {
subdev_name = "isp";
idx = <1>;
path_type = "ISP_MI_PATH_MP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
dw {
subdev_name = "dw";
idx = <0>;
path_type = "DW_DWE_VSE2";
dw_dst_depth = <2>;
};
};
};
&video4{
vi_mem_pool_region = <0>; // vi_mem: framebuffer, region[0]
channel0 {
sensor0 {
subdev_name = "vivcam";
idx = <4>; // imx219
csi_idx = <0>; //<0>=CSI2
mode_idx = <0>;
path_type = "SENSOR_1080P_RAW10_LINER";
};
sensor1 {
subdev_name = "vivcam";
idx = <0xff>; // invalid
csi_idx = <0xff>;
path_type = "SENSOR_VGA_RAW10_LINER";
};
dma {
subdev_name = "vipre";
idx = <0>;
path_type = "VIPRE_CSI0_ISP1";
};
isp {
subdev_name = "isp";
idx = <1>;
path_type = "ISP_MI_PATH_PP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
dsp {
subdev_name = "dsp";
idx = <0>;
path_type = "DSP_PATH_ISP_RY";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
ry {
subdev_name = "ry";
idx = <0>;
path_type = "ISP_RY_MI_PATH_MP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
};
channel1 {
sensor0 {
subdev_name = "vivcam";
idx = <4>; // imx219
csi_idx = <0>; //<0>=CSI2
mode_idx = <0>;
path_type = "SENSOR_1080P_RAW10_LINER";
};
sensor1 {
subdev_name = "vivcam";
idx = <0xff>; // invalid
csi_idx = <0xff>;
path_type = "SENSOR_VGA_RAW10_LINER";
};
dma {
subdev_name = "vipre";
idx = <0>;
path_type = "VIPRE_CSI0_ISP1";
};
isp {
subdev_name = "isp";
idx = <1>;
path_type = "ISP_MI_PATH_PP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
dsp {
subdev_name = "dsp";
idx = <0>;
path_type = "DSP_PATH_ISP_RY";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
ry {
subdev_name = "ry";
idx = <0>;
path_type = "ISP_RY_MI_PATH_SP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
};
channel2 {
sensor0 {
subdev_name = "vivcam";
idx = <4>; // imx219
csi_idx = <0>; //<0>=CSI2
mode_idx = <0>;
path_type = "SENSOR_1080P_RAW10_LINER";
};
sensor1 {
subdev_name = "vivcam";
idx = <0xff>; // invalid
csi_idx = <0xff>;
path_type = "SENSOR_VGA_RAW10_LINER";
};
dma {
subdev_name = "vipre";
idx = <0>;
path_type = "VIPRE_CSI0_ISP1";
};
isp {
subdev_name = "isp";
idx = <1>;
path_type = "ISP_MI_PATH_PP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
dsp {
subdev_name = "dsp";
idx = <0>;
path_type = "DSP_PATH_ISP_RY";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
ry {
subdev_name = "ry";
idx = <0>;
path_type = "ISP_RY_MI_PATH_SP2_BP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
};
};
&video5{
vi_mem_pool_region = <0>; // vi_mem: framebuffer, region[0]
channel0 {
sensor0 {
subdev_name = "vivcam";
idx = <4>; // imx219
csi_idx = <0>; //<0>=CSI2
mode_idx = <0>;
path_type = "SENSOR_1080P_RAW10_LINER";
};
sensor1 {
subdev_name = "vivcam";
idx = <0xff>; // invalid
csi_idx = <0xff>;
path_type = "SENSOR_VGA_RAW10_LINER";
};
dma {
subdev_name = "vipre";
idx = <0>;
path_type = "VIPRE_CSI0_ISP1";
};
isp {
subdev_name = "isp";
idx = <1>;
path_type = "ISP_MI_PATH_PP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
dsp {
subdev_name = "dsp";
idx = <0>;
path_type = "DSP_PATH_ISP_RY";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
ry {
subdev_name = "ry";
idx = <0>;
path_type = "ISP_RY_MI_PATH_MP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
dw {
subdev_name = "dw";
idx = <0>;
path_type = "DW_DWE_VSE0";
dw_dst_depth = <2>;
};
};
channel1 {
sensor0 {
subdev_name = "vivcam";
idx = <4>; // imx219
csi_idx = <0>; //<0>=CSI2
mode_idx = <0>;
path_type = "SENSOR_1080P_RAW10_LINER";
};
sensor1 {
subdev_name = "vivcam";
idx = <0xff>; // invalid
csi_idx = <0xff>;
path_type = "SENSOR_VGA_RAW10_LINER";
};
dma {
subdev_name = "vipre";
idx = <0>;
path_type = "VIPRE_CSI0_ISP1";
};
isp {
subdev_name = "isp";
idx = <1>;
path_type = "ISP_MI_PATH_PP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
dsp {
subdev_name = "dsp";
idx = <0>;
path_type = "DSP_PATH_ISP_RY";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
ry {
subdev_name = "ry";
idx = <0>;
path_type = "ISP_RY_MI_PATH_MP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
dw {
subdev_name = "dw";
idx = <0>;
path_type = "DW_DWE_VSE1";
dw_dst_depth = <2>;
};
};
channel2 {
sensor0 {
subdev_name = "vivcam";
idx = <4>; // imx219
csi_idx = <0>; //<0>=CSI2
mode_idx = <0>;
path_type = "SENSOR_1080P_RAW10_LINER";
};
sensor1 {
subdev_name = "vivcam";
idx = <0xff>; // invalid
csi_idx = <0xff>;
path_type = "SENSOR_VGA_RAW10_LINER";
};
dma {
subdev_name = "vipre";
idx = <0>;
path_type = "VIPRE_CSI0_ISP1";
};
isp {
subdev_name = "isp";
idx = <1>;
path_type = "ISP_MI_PATH_PP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
dsp {
subdev_name = "dsp";
idx = <0>;
path_type = "DSP_PATH_ISP_RY";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
ry {
subdev_name = "ry";
idx = <0>;
path_type = "ISP_RY_MI_PATH_MP";
output {
max_width = <1920>;
max_height = <1088>;
bit_per_pixel = <12>;
frame_count = <3>;
};
};
dw {
subdev_name = "dw";
idx = <0>;
path_type = "DW_DWE_VSE2";
dw_dst_depth = <2>;
};
};
};
#include "th1520-beagle.dts"

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

View File

@@ -1,19 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-fm-emu.dts"
/ {
model = "T-HEAD Light FM EMP Audio FPGA board";
compatible = "thead,light-fm-emu-audio", "thead,light";
};
&lightsound {
status = "okay";
};
&light_i2s {
status = "okay";
};

View File

@@ -1,16 +0,0 @@
#include "light-fm-emu-dsi0.dts"
&disp1_out {
remote-endpoint = <&hdmi_tx_in>;
};
&hdmi_tx {
status = "okay";
port@0 {
/* input */
hdmi_tx_in: endpoint {
remote-endpoint = <&disp1_out>;
};
};
};

View File

@@ -1,64 +0,0 @@
#include "light-fm-emu.dts"
/ {
display-subsystem {
status = "okay";
};
};
&dpu_enc0 {
status = "okay";
ports {
/* output */
port@1 {
reg = <1>;
enc0_out: endpoint {
remote-endpoint = <&dsi0_in>;
};
};
};
};
&dpu {
status = "okay";
};
&dsi0 {
status = "okay";
};
&dhost_0 {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi0_in: endpoint {
remote-endpoint = <&enc0_out>;
};
};
port@1 {
reg = <1>;
dsi0_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
panel@0 {
compatible = "hlt,hpk070h275";
reg = <0>;
port {
panel_in: endpoint {
remote-endpoint = <&dsi0_out>;
};
};
};
};

View File

@@ -1,34 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-fm-emu.dts"
/ {
model = "T-HEAD Light FM EMU DSP FPGA board";
compatible = "thead,light-fm-emu-dsp", "thead,light";
chosen {
linux,initrd-end = <0x0 0x1B000000>;
};
};
&resmem {
dsp_mem: memory@70000000 {
reg = <0x0 0x70000000 0 0x40000000>;
no-map;
};
};
&xtensa_dsp {
status = "okay";
};
&xtensa_dsp0 {
status = "okay";
};
&xtensa_dsp1 {
status = "disabled";
};

View File

@@ -1,20 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-fm-emu.dts"
/ {
model = "T-HEAD Light FM EMU GPU FPGA board";
compatible = "thead,light-fm-emu-gpu", "thead,light";
chosen {
linux,initrd-end = <0x0 0x18000000>;
};
};
&gpu {
status = "okay";
};

View File

@@ -1,26 +0,0 @@
#include "light-fm-emu.dts"
/ {
display-subsystem {
status = "okay";
};
};
&disp1_out {
remote-endpoint = <&hdmi_tx_in>;
};
&dpu {
status = "okay";
};
&hdmi_tx {
status = "okay";
port@0 {
/* input */
hdmi_tx_in: endpoint {
remote-endpoint = <&disp1_out>;
};
};
};

View File

@@ -1,37 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
#include "light-fm-emu.dts"
/ {
model = "T-HEAD Light FM EMU NPU&FCE FPGA board";
compatible = "thead,light-fm-emu-npu-fce", "thead,light";
chosen {
linux,initrd-end = <0x0 0x1B000000>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
facelib_mem: memory@e0000000 {
reg = <0x1 0xe0000000 0 0x20000000>;
no-map;
};
};
};
&npu {
vha_clk_rate = <13000000>;
status = "okay";
};
&fce {
memory-region = <&facelib_mem>;
status = "okay";
};

View File

@@ -1,511 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
*/
/dts-v1/;
#include "light-emu.dtsi"
/ {
model = "T-HEAD Light FM EMU FPGA board";
compatible = "thead,light-fm-emu", "thead,light";
chosen {
bootargs = "console=ttyS0,115200 crashkernel=256M-:128M earlycon sram=0xffe0000000,0x180000";
linux,initrd-start = <0x0 0x2000000>;
linux,initrd-end = <0x0 0x4600000>;
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys";
key0 {
label = "key0";
gpios = <&gpio1_porta 7 1>; /* GPIO_ACTIVE_LOW: 1 */
linux,code = <59>; /* KEY_F1: 59 */
status = "okay";
};
};
leds {
compatible = "gpio-leds";
led0 {
label = "led0";
gpios = <&gpio1_porta 8 0>; /* GPIO_ACTIVE_HIGH: 0 */
default-state = "off";
};
};
iopmp {
compatible = "thead,light-iopmp";
/* config#1: multiple valid regions */
iopmp_emmc: IOPMP_EMMC {
regions = <0x000000 0x100000>,
<0x100000 0x200000>;
attr = <0xFFFFFFFF>;
dummy_slave= <0x800000>;
};
/* config#2: iopmp bypass */
iopmp_sdio0: IOPMP_SDIO0 {
bypass_en;
};
/* config#3: iopmp default region set */
iopmp_sdio1: IOPMP_SDIO1 {
attr = <0xFFFFFFFF>;
is_default_region;
};
iopmp_usb0: IOPMP_USB0 {
attr = <0xFFFFFFFF>;
is_default_region;
};
iopmp_ao: IOPMP_AO {
is_default_region;
};
iopmp_aud: IOPMP_AUD {
is_default_region;
};
iopmp_chip_dbg: IOPMP_CHIP_DBG {
is_default_region;
};
iopmp_eip120i: IOPMP_EIP120I {
is_default_region;
};
iopmp_eip120ii: IOPMP_EIP120II {
is_default_region;
};
iopmp_eip120iii: IOPMP_EIP120III {
is_default_region;
};
iopmp_isp0: IOPMP_ISP0 {
is_default_region;
};
iopmp_isp1: IOPMP_ISP1 {
is_default_region;
};
iopmp_dsp: IOPMP_DSP {
is_default_region;
};
iopmp_dw200: IOPMP_DW200 {
is_default_region;
};
iopmp_venc: IOPMP_VENC {
is_default_region;
};
iopmp_vdec: IOPMP_VDEC {
is_default_region;
};
iopmp_g2d: IOPMP_G2D {
is_default_region;
};
iopmp_fce: IOPMP_FCE {
is_default_region;
};
iopmp_npu: IOPMP_NPU {
is_default_region;
};
iopmp0_dpu: IOPMP0_DPU {
bypass_en;
};
iopmp1_dpu: IOPMP1_DPU {
bypass_en;
};
iopmp_gpu: IOPMP_GPU {
is_default_region;
};
iopmp_gmac1: IOPMP_GMAC1 {
is_default_region;
};
iopmp_gmac2: IOPMP_GMAC2 {
is_default_region;
};
iopmp_dmac: IOPMP_DMAC {
is_default_region;
};
iopmp_tee_dmac: IOPMP_TEE_DMAC {
is_default_region;
};
};
mbox_910t_client1: mbox_910t_client1 {
compatible = "thead,light-mbox-client";
mbox-names = "902";
mboxes = <&mbox_910t 1 0>;
status = "disabled";
};
mbox_910t_client2: mbox_910t_client2 {
compatible = "thead,light-mbox-client";
mbox-names = "906";
mboxes = <&mbox_910t 2 0>;
status = "disabled";
};
lightsound: lightsound@1 {
compatible = "simple-audio-card";
simple-audio-card,name = "Light-Sound-Card";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
simple-audio-card,dai-link@0 { /* I2S - CODEC */
reg = <0>;
format = "i2s";
cpu {
sound-dai = <&light_i2s 0>;
};
codec {
sound-dai = <&dummy_codec>;
};
};
simple-audio-card,dai-link@1 { /* I2S - HDMI */
reg = <1>;
format = "i2s";
cpu {
sound-dai = <&light_i2s 1>;
};
codec {
sound-dai = <&dummy_codec>;
};
};
};
dummy_codec: dummy_codec {
#sound-dai-cells = <1>;
compatible = "linux,bt-sco";
status = "okay";
};
};
&i2c0 {
clock-frequency = <100000>;
status = "okay";
eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
pagesize = <32>;
};
};
&spi0 {
num-cs = <2>;
cs-gpios = <&gpio2_porta 15 0>, // GPIO_ACTIVE_HIGH: 0
<&gpio2_porta 23 0>; // GPIO_ACTIVE_LOW: 1
status = "okay";
spi_norflash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "winbond,w25q64", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <8000000>;
w25q,fast-read;
};
spidev@1 {
compatible = "spidev";
#address-cells = <1>;
#size-cells = <1>;
reg = <1>;
spi-max-frequency = <12500000>;
};
};
&uart0 {
clock-frequency = <50000000>;
};
&qspi0 {
num-cs = <2>;
cs-gpios = <&gpio2_porta 3 0>, // GPIO_ACTIVE_HIGH: 0
<&gpio2_porta 26 0>;
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-nand";
spi-max-frequency = <10000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
reg = <0>;
partition@0 {
label = "ubi1";
reg = <0x00000000 0x08000000>;
};
};
spidev@1 {
compatible = "spidev";
#address-cells = <1>;
#size-cells = <1>;
reg = <1>;
spi-max-frequency = <6250000>;
};
};
&gmac0 {
max-speed = <100>;
phy-mode = "mii";
phy-handle = <&phy_88E1111_0>;
status = "okay";
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy_88E1111_0: ethernet-phy@0 {
reg = <0x0 0x0>;
};
};
};
&gmac1 {
max-speed = <100>;
phy-mode = "mii";
phy-handle = <&phy_88E1111_1>;
status = "disabled";
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy_88E1111_1: ethernet-phy@0 {
reg = <0x0 0x0>;
};
};
};
&emmc {
max-frequency = <50000000>;
non-removable;
no-sdio;
no-sd;
bus-width = <8>;
status = "okay";
};
&sdhci0 {
max-frequency = <50000000>;
no-1-8-v;
bus-width = <4>;
status = "okay";
};
&padctrl0_apsys {
light-fm-evb {
/*
* Pin Configuration Node:
* Format: <pin_id mux_node config>
*/
pinctrl_uart0: uart0grp {
thead,pins = <
FM_UART0_TXD 0x0 0x72
FM_UART0_RXD 0x0 0x72
>;
};
pinctrl_spi0: spi0grp {
thead,pins = <
FM_SPI_CSN 0x0 0x72
>;
};
pinctrl_qspi0: qspi0grp {
thead,pins = <
FM_QSPI0_CSN0 0x0 0x72
>;
};
};
};
&padctrl1_apsys {
light-fm-evb {
/*
* Pin Configuration Node:
* Format: <pin_id mux_node config>
*/
pinctrl_uart3: uart3grp {
thead,pins = <
FM_UART3_TXD 0x0 0x72
FM_UART3_RXD 0x0 0x72
>;
};
pinctrl_uart4: uart4grp {
thead,pins = <
FM_UART4_TXD 0x0 0x72
FM_UART4_RXD 0x0 0x72
FM_UART4_CTSN 0x0 0x72
FM_UART4_RTSN 0x0 0x72
>;
};
};
};
&padctrl_aosys {
light-fm-evb {
/*
* Pin Configuration Node:
* Format: <pin_id mux_node config>
*/
pinctrl_audiopa1: audiopa1_grp {
thead,pins = <
FM_AUDIO_PA1 0x3 0x72
>;
};
pinctrl_audiopa2: audiopa2_grp {
thead,pins = <
FM_AUDIO_PA2 0x0 0x72
>;
};
};
};
&i2c2 {
status = "okay";
};
&isp0 {
status = "okay";
};
&isp1 {
status = "okay";
};
&isp_ry0 {
status = "okay";
};
&dewarp {
status = "okay";
};
&dec400_isp0 {
status = "okay";
};
&dec400_isp1 {
status = "okay";
};
&dec400_isp2 {
status = "okay";
};
&bm_visys {
status = "okay";
};
&bm_csi0 {
status = "okay";
};
&vi_pre {
status = "okay";
};
&vvcam_sensor0 {
sensor_name = "OV5693";
status = "okay";
};
&video{
status = "okay";
channel0 {
channel_id = <0>;
status = "okay";
sensor0 {
subdev_name = "vivcam";
idx = <0>;
csi_idx = <0>;
path_type = "SENSOR_VGA_RAW10_LINER";
};
/*
csi0 {
subdev_name = "bm_csi";
idx = <0>;
};
*/
dma {
subdev_name = "vipre";
idx = <0>;
path_type = "VIPRE_CSI0_ISP0";
};
isp {
subdev_name = "isp";
idx = <0>;
path_type = "ISP_MI_PATH_PP";
};
dsp {
subdev_name = "dsp";
idx = <0>;
path_type = "DSP_PATH_ISP_RY";
};
ry {
subdev_name = "ry";
idx = <0>;
path_type = "ISP_RY_MI_PATH_MP";
};
dw {
subdev_name = "dw";
idx = <0>;
path_type = "DW_PATH_MEM_DW_SC_MEM";
};
};
};
&vdec {
status = "okay";
};
&venc {
status = "okay";
};
&isp_venc_shake {
status = "okay";
};
&vidmem {
status = "okay";
};

View File

@@ -1,20 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2022 Alibaba Group Holding Limited.
* Copyright (C) 2024 ISCAS.
*/
#include "light-lpi4a-ref.dts"
/ {
model = "T-HEAD Light Lichee Pi 4A configuration for 16GB DDR board";
compatible = "thead,light-val", "thead,light-lpi4a", "thead,light";
memory@0 {
device_type = "memory";
reg = <0x0 0x200000 0x3 0xffe00000>;
};
};
&cmamem {
alloc-ranges = <0x3 0xe4000000 0 0x14000000>; // [0x3E400_0000 ~ 0x3F800_0000]
};
#include "th1520-lpi4a-16gb.dts"

View File

@@ -0,0 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2024 ISCAS.
*/
#include "th1520-lpi4a-console-16g.dts"

View File

@@ -0,0 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2024 ISCAS.
*/
#include "th1520-lpi4a-console.dts"

Some files were not shown because too many files have changed in this diff Show More