PCB: update Rev.E assembly diagrams

CHANGELOG

@@ -0,0 +1,24 @@
+v0.1.1
+======
+
+ * initial public release
+
+
+v0.1.1a (bugfix release)
+========================
+
+ * Fixes:
+   - SuperCIC pair mode was erroneously enabled in firmware binary
+   - SNES menu crashed on empty database
+
+
+v0.1.2
+======
+
+ * Auto region override (eliminate "This game pak is not designed..." messages)
+ * Improved mapper detection (fixes Batman vs. Joker and many PD ROMs)
+ * Improved data streaming performance
+   (should reduce MSU1 errors with some cards)
+ * A and B buttons swapped in menu to match common key mappings
+ * Fixes:
+   - MSU1: Stop audio playback on end of audio file

cic/supercic/supercic-key.asm

@@ -64,6 +64,7 @@ processor p12f629
 ;   0x4d		buffer for eeprom access
 ;   0x4e		loop variable for longwait
 ;   0x4f		loop variable for wait
+;   0x5c		GPIO buffer variable for pair mode allow
 ;   0x5d		0: SuperCIC pair mode available flag
 ;   0x5e                SuperCIC pair mode detect (phase 1)
 ;   0x5f                SuperCIC pair mode detect (phase 2)
@@ -90,8 +91,8 @@ isr
 	clrf	0x5f		; clear pair mode detect
 	bsf	0x5f, 1		;
 	clrf	0x5d		; clear pair mode available
-	nop
-	nop
+	clrf	0x5c		; clear pair mode allow buffer
+	bsf	0x5c, 3		; assume disallow
 	bsf	INTCON, 7	; re-enable interrupts (ISR will continue as main)
 	goto	main
 init
@@ -296,8 +297,8 @@ swapskip
 ; indirect access, no post increment, etc.
 mangle
 	call	mangle_lock
-	nop
-	nop
+	movf	GPIO, w	; buffer GPIO state
+	movwf	0x5c	; for pair mode "transaction"
 mangle_key
 	movf	0x2f, w
 	movwf	0x20	
@@ -459,7 +460,7 @@ mangle_key_withskip
 ;-------pair mode code-------
 	bcf	GPIO, 0
 	movf	GPIO, w
-	btfss	GPIO, 3
+	btfss	0x5c, 3
 	bsf	GPIO, 0
 	movwf	0x5e
 	movf	GPIO, w
@@ -642,7 +643,7 @@ mangle_lock_withskip
 	goto	scic_pair_skip1
 	btfsc	0x5f, 1
 	goto	scic_pair_skip2
-	btfsc	GPIO, 3
+	btfsc	0x5c, 3
 	goto	scic_pair_skip3
 	goto	supercic_pairmode
 scic_pair_skip1

pcb/kicad/RevE/fpga.sch

@@ -1,4 +1,4 @@
-EESchema Schematic File Version 2  date Fri 29 Jul 2011 09:56:34 PM CEST
+EESchema Schematic File Version 2  date Fri 09 Dec 2011 10:46:06 PM CET
 LIBS:power
 LIBS:device
 LIBS:transistors
@@ -47,7 +47,7 @@ $Descr A3 16535 11700
 encoding utf-8
 Sheet 6 6
 Title "sd2snes Mark II"
-Date "24 jul 2011"
+Date "9 dec 2011"
 Rev "C"
 Comp "Maximilian Rehkopf"
 Comment1 ""

pcb/kicad/RevE/mcu.sch

@@ -1,4 +1,4 @@
-EESchema Schematic File Version 2  date Fri 29 Jul 2011 09:56:34 PM CEST
+EESchema Schematic File Version 2  date Fri 09 Dec 2011 10:46:06 PM CET
 LIBS:power
 LIBS:device
 LIBS:transistors
@@ -47,7 +47,7 @@ $Descr A4 11700 8267
 encoding utf-8
 Sheet 4 6
 Title "sd2snes Mark II"
-Date "24 jul 2011"
+Date "9 dec 2011"
 Rev "C"
 Comp "Maximilian Rehkopf"
 Comment1 ""
@@ -1034,7 +1034,7 @@ L C C409
 U 1 1 4BEECBD1
 P 3100 6600
 F 0 "C409" H 3150 6700 50  0000 L CNN
-F 1 "22p" H 3150 6500 50  0000 L CNN
+F 1 "10p" H 3150 6500 50  0000 L CNN
 F 2 "SM0805_FIXEDMASK" H 3100 6600 60  0001 C CNN
 	1    3100 6600
 	1    0    0    -1  
@@ -1044,7 +1044,7 @@ L C C408
 U 1 1 4BEECBCD
 P 2500 6600
 F 0 "C408" H 2550 6700 50  0000 L CNN
-F 1 "22p" H 2550 6500 50  0000 L CNN
+F 1 "10p" H 2550 6500 50  0000 L CNN
 F 2 "SM0805_FIXEDMASK" H 2500 6600 60  0001 C CNN
 	1    2500 6600
 	1    0    0    -1  

pcb/kicad/RevE/memory.sch

@@ -1,4 +1,4 @@
-EESchema Schematic File Version 2  date Fri 29 Jul 2011 09:56:34 PM CEST
+EESchema Schematic File Version 2  date Fri 09 Dec 2011 10:46:05 PM CET
 LIBS:power
 LIBS:device
 LIBS:transistors
@@ -47,7 +47,7 @@ $Descr A4 11700 8267
 encoding utf-8
 Sheet 3 6
 Title "sd2snes Mark II"
-Date "24 jul 2011"
+Date "9 dec 2011"
 Rev "C"
 Comp "Maximilian Rehkopf"
 Comment1 ""
@@ -322,7 +322,7 @@ L R R513
 U 1 1 4BF2FDAC
 P 9150 5700
 F 0 "R513" V 9230 5700 50  0000 C CNN
-F 1 "1k" V 9150 5700 50  0000 C CNN
+F 1 "100k" V 9150 5700 50  0000 C CNN
 F 2 "SM0805_FIXEDMASK" H 9150 5700 60  0001 C CNN
 	1    9150 5700
 	1    0    0    -1  

pcb/kicad/RevE/pwr_misc.sch

@@ -1,4 +1,4 @@
-EESchema Schematic File Version 2  date Fri 29 Jul 2011 09:56:34 PM CEST
+EESchema Schematic File Version 2  date Fri 09 Dec 2011 10:46:06 PM CET
 LIBS:power
 LIBS:device
 LIBS:transistors
@@ -47,7 +47,7 @@ $Descr A4 11700 8267
 encoding utf-8
 Sheet 5 6
 Title "sd2snes Mark II"
-Date "24 jul 2011"
+Date "9 dec 2011"
 Rev "C"
 Comp "Maximilian Rehkopf"
 Comment1 ""
@@ -55,6 +55,8 @@ Comment2 ""
 Comment3 ""
 Comment4 ""
 $EndDescr
+Text Notes 4900 5900 0    50   ~ 0
+Stuff with 0603 ferrite bead
 Wire Wire Line
 	5750 5500 5900 5500
 Wire Wire Line
@@ -334,7 +336,7 @@ L JUMPER JP341
 U 1 1 4DB35D41
 P 5450 5500
 F 0 "JP341" H 5450 5650 60  0000 C CNN
-F 1 "JUMPER" H 5450 5420 40  0000 C CNN
+F 1 "FB 0603" H 5450 5420 40  0000 C CNN
 	1    5450 5500
 	1    0    0    -1  
 $EndComp

pcb/kicad/RevE/sd2snes.sch

@@ -1,4 +1,4 @@
-EESchema Schematic File Version 2  date Fri 29 Jul 2011 09:56:34 PM CEST
+EESchema Schematic File Version 2  date Fri 09 Dec 2011 10:46:05 PM CET
 LIBS:power
 LIBS:device
 LIBS:transistors
@@ -47,7 +47,7 @@ $Descr A4 11700 8267
 encoding utf-8
 Sheet 1 6
 Title "sd2snes Mark II"
-Date "24 jul 2011"
+Date "9 dec 2011"
 Rev "E"
 Comp "Maximilian Rehkopf"
 Comment1 ""

pcb/kicad/RevE/snesslot.sch

@@ -1,4 +1,4 @@
-EESchema Schematic File Version 2  date Fri 29 Jul 2011 09:56:34 PM CEST
+EESchema Schematic File Version 2  date Fri 09 Dec 2011 10:46:05 PM CET
 LIBS:power
 LIBS:device
 LIBS:transistors
@@ -47,7 +47,7 @@ $Descr A3 16535 11700
 encoding utf-8
 Sheet 2 6
 Title "sd2snes Mark II"
-Date "24 jul 2011"
+Date "9 dec 2011"
 Rev "C"
 Comp "Maximilian Rehkopf"
 Comment1 ""
@@ -855,7 +855,7 @@ L R_PACK4 RA114
 U 1 1 4D97B45F
 P 15250 4750
 F 0 "RA114" H 15250 4600 40  0000 C CNN
-F 1 "220" H 15250 4950 40  0000 C CNN
+F 1 "100" H 15250 4950 40  0000 C CNN
 	1    15250 4750
 	1    0    0    -1  
 $EndComp
@@ -864,7 +864,7 @@ L R_PACK4 RA113
 U 1 1 4D97B45C
 P 15250 4350
 F 0 "RA113" H 15250 4800 40  0000 C CNN
-F 1 "220" H 15250 4550 40  0000 C CNN
+F 1 "100" H 15250 4550 40  0000 C CNN
 	1    15250 4350
 	1    0    0    -1  
 $EndComp
@@ -913,7 +913,7 @@ L R_PACK4 RA108
 U 1 1 4D963119
 P 4150 8350
 F 0 "RA108" H 4150 8300 40  0000 C CNN
-F 1 "220" H 4150 8550 40  0000 C CNN
+F 1 "100" H 4150 8550 40  0000 C CNN
 	1    4150 8350
 	-1   0    0    -1  
 $EndComp
@@ -922,7 +922,7 @@ L R_PACK4 RA107
 U 1 1 4D963117
 P 4150 7950
 F 0 "RA107" H 4150 8400 40  0000 C CNN
-F 1 "220" H 4150 8150 40  0000 C CNN
+F 1 "100" H 4150 8150 40  0000 C CNN
 	1    4150 7950
 	-1   0    0    -1  
 $EndComp
@@ -931,7 +931,7 @@ L R_PACK4 RA106
 U 1 1 4D963115
 P 4150 7350
 F 0 "RA106" H 4150 7300 40  0000 C CNN
-F 1 "220" H 4150 7550 40  0000 C CNN
+F 1 "100" H 4150 7550 40  0000 C CNN
 	1    4150 7350
 	-1   0    0    -1  
 $EndComp
@@ -940,7 +940,7 @@ L R_PACK4 RA105
 U 1 1 4D96310E
 P 4150 6950
 F 0 "RA105" H 4150 7400 40  0000 C CNN
-F 1 "220" H 4150 7150 40  0000 C CNN
+F 1 "100" H 4150 7150 40  0000 C CNN
 	1    4150 6950
 	-1   0    0    -1  
 $EndComp
@@ -949,7 +949,7 @@ L R_PACK4 RA112
 U 1 1 4D96310C
 P 4150 4650
 F 0 "RA112" H 4150 4600 40  0000 C CNN
-F 1 "220" H 4150 4850 40  0000 C CNN
+F 1 "100" H 4150 4850 40  0000 C CNN
 	1    4150 4650
 	1    0    0    -1  
 $EndComp
@@ -958,7 +958,7 @@ L R_PACK4 RA111
 U 1 1 4D96310A
 P 4150 4250
 F 0 "RA111" H 4150 4700 40  0000 C CNN
-F 1 "220" H 4150 4450 40  0000 C CNN
+F 1 "100" H 4150 4450 40  0000 C CNN
 	1    4150 4250
 	-1   0    0    -1  
 $EndComp
@@ -967,7 +967,7 @@ L R_PACK4 RA110
 U 1 1 4D963107
 P 4150 3650
 F 0 "RA110" H 4150 3600 40  0000 C CNN
-F 1 "220" H 4150 3850 40  0000 C CNN
+F 1 "100" H 4150 3850 40  0000 C CNN
 	1    4150 3650
 	-1   0    0    -1  
 $EndComp
@@ -976,7 +976,7 @@ L R_PACK4 RA109
 U 1 1 4D963103
 P 4150 3250
 F 0 "RA109" H 4150 3700 40  0000 C CNN
-F 1 "220" H 4150 3450 40  0000 C CNN
+F 1 "100" H 4150 3450 40  0000 C CNN
 	1    4150 3250
 	-1   0    0    -1  
 $EndComp
@@ -985,7 +985,7 @@ L R_PACK4 RA102
 U 1 1 4D9630F4
 P 12400 3750
 F 0 "RA102" H 12400 3700 40  0000 C CNN
-F 1 "220" H 12400 3950 40  0000 C CNN
+F 1 "100" H 12400 3950 40  0000 C CNN
 	1    12400 3750
 	1    0    0    -1  
 $EndComp
@@ -994,7 +994,7 @@ L R_PACK4 RA101
 U 1 1 4D9630F0
 P 12400 3350
 F 0 "RA101" H 12400 3800 40  0000 C CNN
-F 1 "220" H 12400 3550 40  0000 C CNN
+F 1 "100" H 12400 3550 40  0000 C CNN
 	1    12400 3350
 	1    0    0    -1  
 $EndComp
@@ -1005,7 +1005,7 @@ P 12400 4750
 AR Path="/4B6E16F2/4D95CDCD" Ref="RP?"  Part="1" 
 AR Path="/4B6E16F2/4D95CDD4" Ref="RA104"  Part="1" 
 F 0 "RA104" H 12400 4650 40  0000 C CNN
-F 1 "220" H 12400 4950 40  0000 C CNN
+F 1 "FB" H 12400 4950 40  0000 C CNN
 	1    12400 4750
 	1    0    0    -1  
 $EndComp
@@ -1014,7 +1014,7 @@ L R_PACK4 RA103
 U 1 1 4D95CDCD
 P 12400 4350
 F 0 "RA103" H 12400 4800 40  0000 C CNN
-F 1 "220" H 12400 4550 40  0000 C CNN
+F 1 "FB" H 12400 4550 40  0000 C CNN
 	1    12400 4350
 	1    0    0    -1  
 $EndComp
@@ -1125,7 +1125,7 @@ L R R102
 U 1 1 4C7EAEBF
 P 6850 8600
 F 0 "R102" V 6930 8600 50  0000 C CNN
-F 1 "1k" V 6850 8600 50  0000 C CNN
+F 1 "100k" V 6850 8600 50  0000 C CNN
 	1    6850 8600
 	1    0    0    -1  
 $EndComp

pcb/kicad/RevE2/memory.sch

@@ -0,0 +1,807 @@
+EESchema Schematic File Version 2  date Mon 02 Jan 2012 11:27:18 PM CET
+LIBS:power
+LIBS:device
+LIBS:transistors
+LIBS:conn
+LIBS:linear
+LIBS:regul
+LIBS:74xx
+LIBS:cmos4000
+LIBS:adc-dac
+LIBS:memory
+LIBS:xilinx
+LIBS:special
+LIBS:microcontrollers
+LIBS:dsp
+LIBS:microchip
+LIBS:analog_switches
+LIBS:motorola
+LIBS:texas
+LIBS:intel
+LIBS:audio
+LIBS:interface
+LIBS:digital-audio
+LIBS:philips
+LIBS:display
+LIBS:cypress
+LIBS:siliconi
+LIBS:opto
+LIBS:atmel
+LIBS:contrib
+LIBS:valves
+LIBS:snescart
+LIBS:misc-74
+LIBS:vreg
+LIBS:lpc1754
+LIBS:sd_card
+LIBS:cy62148ev30
+LIBS:mt45w8mw16
+LIBS:cs4344
+LIBS:double_sch_kcom
+LIBS:usb_minib
+LIBS:mic23250
+LIBS:sd2snes-cache
+EELAYER 25  0
+EELAYER END
+$Descr A4 11700 8267
+encoding utf-8
+Sheet 3 6
+Title "sd2snes Mark II"
+Date "2 jan 2012"
+Rev "E2"
+Comp "Maximilian Rehkopf"
+Comment1 ""
+Comment2 ""
+Comment3 ""
+Comment4 ""
+$EndDescr
+Text Label 7650 2000 0    50   ~ 0
+SRAM_Vcc
+Wire Wire Line
+	7650 4750 7650 5000
+Wire Wire Line
+	8350 5050 8350 5250
+Wire Wire Line
+	8350 5250 8500 5250
+Connection ~ 9150 5250
+Wire Wire Line
+	9150 5450 9150 5250
+Connection ~ 9600 2000
+Wire Wire Line
+	9600 2000 9600 3350
+Wire Wire Line
+	10500 2000 10350 2000
+Wire Wire Line
+	8400 1400 8400 1600
+Wire Wire Line
+	8400 1600 8050 1600
+Wire Wire Line
+	6800 4350 6300 4350
+Wire Wire Line
+	6800 4250 6300 4250
+Wire Wire Line
+	6800 4150 6300 4150
+Wire Wire Line
+	6800 4050 6300 4050
+Wire Wire Line
+	6800 3950 6300 3950
+Wire Wire Line
+	6800 3850 6300 3850
+Wire Wire Line
+	6800 3750 6300 3750
+Wire Wire Line
+	6800 3650 6300 3650
+Wire Wire Line
+	6800 3550 6300 3550
+Wire Wire Line
+	6800 3450 6300 3450
+Wire Wire Line
+	6800 3350 6300 3350
+Wire Wire Line
+	6800 3250 6300 3250
+Wire Wire Line
+	6800 3150 6300 3150
+Wire Wire Line
+	6800 3050 6300 3050
+Wire Wire Line
+	6800 2950 6300 2950
+Wire Wire Line
+	6800 2850 6300 2850
+Wire Wire Line
+	6800 2750 6300 2750
+Wire Wire Line
+	6800 2650 6300 2650
+Wire Wire Line
+	6800 2550 6300 2550
+Wire Wire Line
+	8500 3950 9000 3950
+Wire Wire Line
+	4750 4750 4250 4750
+Wire Wire Line
+	4250 4650 4750 4650
+Wire Wire Line
+	4250 4350 4750 4350
+Wire Wire Line
+	4250 4150 4750 4150
+Wire Wire Line
+	4250 4050 4750 4050
+Wire Wire Line
+	4250 3750 4750 3750
+Wire Wire Line
+	4250 3650 4750 3650
+Wire Wire Line
+	4250 3550 4750 3550
+Wire Wire Line
+	4250 3450 4750 3450
+Wire Wire Line
+	4250 3350 4750 3350
+Wire Wire Line
+	4250 3250 4750 3250
+Wire Wire Line
+	4250 3150 4750 3150
+Wire Wire Line
+	4250 3050 4750 3050
+Wire Wire Line
+	4250 2850 4750 2850
+Wire Wire Line
+	4250 2750 4750 2750
+Wire Wire Line
+	4250 2650 4750 2650
+Wire Wire Line
+	4250 2550 4750 2550
+Wire Wire Line
+	4250 2450 4750 2450
+Wire Wire Line
+	4250 2350 4750 2350
+Wire Wire Line
+	4250 2250 4750 2250
+Wire Wire Line
+	4250 2150 4750 2150
+Wire Wire Line
+	3550 6800 3550 6700
+Wire Wire Line
+	3400 5400 3400 5300
+Wire Wire Line
+	3300 5150 3300 5300
+Wire Wire Line
+	3300 1750 3300 1550
+Connection ~ 7650 2000
+Wire Wire Line
+	3500 1750 3500 1550
+Wire Wire Line
+	3500 5150 3500 5300
+Wire Wire Line
+	3500 5300 3300 5300
+Connection ~ 3400 5300
+Wire Wire Line
+	3550 7200 3550 7300
+Wire Wire Line
+	3250 7200 3250 7300
+Wire Wire Line
+	3250 6700 3250 6800
+Wire Wire Line
+	2550 2150 2050 2150
+Wire Wire Line
+	2550 2250 2050 2250
+Wire Wire Line
+	2550 2350 2050 2350
+Wire Wire Line
+	2550 2450 2050 2450
+Wire Wire Line
+	2550 2550 2050 2550
+Wire Wire Line
+	2550 2650 2050 2650
+Wire Wire Line
+	2550 2750 2050 2750
+Wire Wire Line
+	2550 2850 2050 2850
+Wire Wire Line
+	2550 2950 2050 2950
+Wire Wire Line
+	2550 3050 2050 3050
+Wire Wire Line
+	2550 3150 2050 3150
+Wire Wire Line
+	2550 3250 2050 3250
+Wire Wire Line
+	2550 3350 2050 3350
+Wire Wire Line
+	2550 3450 2050 3450
+Wire Wire Line
+	2550 3550 2050 3550
+Wire Wire Line
+	2550 3650 2050 3650
+Wire Wire Line
+	2550 3750 2050 3750
+Wire Wire Line
+	2550 3850 2050 3850
+Wire Wire Line
+	2550 3950 2050 3950
+Wire Wire Line
+	2550 4050 2050 4050
+Wire Wire Line
+	2550 4150 2050 4150
+Wire Wire Line
+	2550 4250 2050 4250
+Wire Wire Line
+	2550 4350 2050 4350
+Wire Wire Line
+	2550 4650 2050 4650
+Wire Wire Line
+	2550 4750 2050 4750
+Wire Wire Line
+	2550 4550 2050 4550
+Wire Wire Line
+	8500 4050 9000 4050
+Connection ~ 4750 4750
+Wire Wire Line
+	4750 4350 4750 5400
+Connection ~ 4750 4650
+Wire Wire Line
+	8500 2550 9000 2550
+Wire Wire Line
+	8500 2650 9000 2650
+Wire Wire Line
+	8500 2750 9000 2750
+Wire Wire Line
+	8500 2850 9000 2850
+Wire Wire Line
+	8500 2950 9000 2950
+Wire Wire Line
+	8500 3050 9000 3050
+Wire Wire Line
+	8500 3150 9000 3150
+Wire Wire Line
+	8500 3250 9000 3250
+Wire Wire Line
+	7250 1600 6900 1600
+Wire Wire Line
+	6900 1600 6900 1400
+Wire Wire Line
+	8500 3850 9600 3850
+Wire Wire Line
+	9600 3850 9600 5050
+Wire Wire Line
+	9000 5250 9300 5250
+Wire Wire Line
+	9150 5950 9150 6050
+Wire Wire Line
+	9150 6050 9600 6050
+Wire Wire Line
+	9600 6350 9600 5450
+Connection ~ 9600 6050
+Wire Wire Line
+	7650 2150 7650 1800
+Wire Wire Line
+	9950 2000 7650 2000
+$Comp
+L CY62148EV30-ZSXI U511
+U 1 1 4D49598F
+P 7650 3450
+F 0 "U511" H 7650 3550 60  0000 C CNN
+F 1 "CY62148EV30-ZSXI" H 7700 3450 60  0000 C CNN
+	1    7650 3450
+	1    0    0    -1  
+$EndComp
+Text Notes 7050 7000 0    250  ~ 50
+Memory
+Text Notes 7300 1300 0    50   ~ 0
+SRAM battery power
+Text Notes 9800 5300 0    50   ~ 0
+Battery power OE switch
+$Comp
+L +3.3V #PWR031
+U 1 1 4BF2FE97
+P 8350 5050
+F 0 "#PWR031" H 8350 5010 30  0001 C CNN
+F 1 "+3.3V" H 8350 5160 30  0000 C CNN
+	1    8350 5050
+	1    0    0    -1  
+$EndComp
+$Comp
+L GND #PWR032
+U 1 1 4BF2FE7B
+P 9600 6350
+F 0 "#PWR032" H 9600 6350 30  0001 C CNN
+F 1 "GND" H 9600 6280 30  0001 C CNN
+	1    9600 6350
+	1    0    0    -1  
+$EndComp
+$Comp
+L R R511
+U 1 1 4BF2FDAF
+P 9600 3600
+F 0 "R511" V 9680 3600 50  0000 C CNN
+F 1 "20k" V 9600 3600 50  0000 C CNN
+F 2 "SM0805_FIXEDMASK" H 9600 3600 60  0001 C CNN
+	1    9600 3600
+	1    0    0    -1  
+$EndComp
+$Comp
+L R R513
+U 1 1 4BF2FDAC
+P 9150 5700
+F 0 "R513" V 9230 5700 50  0000 C CNN
+F 1 "100k" V 9150 5700 50  0000 C CNN
+F 2 "SM0805_FIXEDMASK" H 9150 5700 60  0001 C CNN
+	1    9150 5700
+	1    0    0    -1  
+$EndComp
+$Comp
+L R R512
+U 1 1 4BF2FDA9
+P 8750 5250
+F 0 "R512" V 8830 5250 50  0000 C CNN
+F 1 "4k7" V 8750 5250 50  0000 C CNN
+F 2 "SM0805_FIXEDMASK" H 8750 5250 60  0001 C CNN
+	1    8750 5250
+	0    1    1    0   
+$EndComp
+$Comp
+L NPN Q511
+U 1 1 4BF2FD9F
+P 9500 5250
+F 0 "Q511" H 9500 5100 50  0000 R CNN
+F 1 "2N2222A" H 9500 5400 50  0000 R CNN
+F 2 "SOT23EBC" H 9500 5250 60  0001 C CNN
+	1    9500 5250
+	1    0    0    -1  
+$EndComp
+$Comp
+L GND #PWR033
+U 1 1 4BF1A006
+P 10500 2000
+F 0 "#PWR033" H 10500 2000 30  0001 C CNN
+F 1 "GND" H 10500 1930 30  0001 C CNN
+	1    10500 2000
+	0    -1   -1   0   
+$EndComp
+$Comp
+L +BATT #PWR034
+U 1 1 4BF19EA4
+P 8400 1400
+F 0 "#PWR034" H 8400 1350 20  0001 C CNN
+F 1 "+BATT" H 8400 1500 30  0000 C CNN
+	1    8400 1400
+	1    0    0    -1  
+$EndComp
+$Comp
+L +3.3V #PWR035
+U 1 1 4BF19E7A
+P 6900 1400
+F 0 "#PWR035" H 6900 1360 30  0001 C CNN
+F 1 "+3.3V" H 6900 1510 30  0000 C CNN
+	1    6900 1400
+	1    0    0    -1  
+$EndComp
+$Comp
+L DOUBLE_SCH_KCOM2 D511
+U 1 1 4BF19DCA
+P 7650 1600
+F 0 "D511" H 7800 1475 60  0000 C CNN
+F 1 "BAT54C" H 7650 1750 60  0000 C CNN
+F 2 "SOT23EBC" H 7650 1600 60  0001 C CNN
+	1    7650 1600
+	1    0    0    -1  
+$EndComp
+Text Label 8600 4050 0    50   ~ 0
+RAM_/WE
+Text Label 8600 3950 0    50   ~ 0
+RAM_/OE
+Text Label 8600 3850 0    50   ~ 0
+RAM_/CE
+Text Label 8600 3250 0    50   ~ 0
+RAM_DQ7
+Text Label 8600 3150 0    50   ~ 0
+RAM_DQ6
+Text Label 8600 3050 0    50   ~ 0
+RAM_DQ5
+Text Label 8600 2950 0    50   ~ 0
+RAM_DQ4
+Text Label 8600 2850 0    50   ~ 0
+RAM_DQ3
+Text Label 8600 2750 0    50   ~ 0
+RAM_DQ2
+Text Label 8600 2650 0    50   ~ 0
+RAM_DQ1
+Text Label 8600 2550 0    50   ~ 0
+RAM_DQ0
+Text Label 6400 4350 0    50   ~ 0
+RAM_A18
+Text Label 6400 4250 0    50   ~ 0
+RAM_A17
+Text Label 6400 4150 0    50   ~ 0
+RAM_A16
+Text Label 6400 4050 0    50   ~ 0
+RAM_A15
+Text Label 6400 3950 0    50   ~ 0
+RAM_A14
+Text Label 6400 3850 0    50   ~ 0
+RAM_A13
+Text Label 6400 3750 0    50   ~ 0
+RAM_A12
+Text Label 6400 3650 0    50   ~ 0
+RAM_A11
+Text Label 6400 3550 0    50   ~ 0
+RAM_A10
+Text Label 6400 3450 0    50   ~ 0
+RAM_A9
+Text Label 6400 3350 0    50   ~ 0
+RAM_A8
+Text Label 6400 3250 0    50   ~ 0
+RAM_A7
+Text Label 6400 3150 0    50   ~ 0
+RAM_A6
+Text Label 6400 3050 0    50   ~ 0
+RAM_A5
+Text Label 6400 2950 0    50   ~ 0
+RAM_A4
+Text Label 6400 2850 0    50   ~ 0
+RAM_A3
+Text Label 6400 2750 0    50   ~ 0
+RAM_A2
+Text Label 6400 2650 0    50   ~ 0
+RAM_A1
+Text Label 6400 2550 0    50   ~ 0
+RAM_A0
+Text Label 4350 4150 0    50   ~ 0
+ROM_/UB
+Text Label 4350 4050 0    50   ~ 0
+ROM_/LB
+Text Label 4350 3750 0    50   ~ 0
+ROM_DQ15
+Text Label 4350 3650 0    50   ~ 0
+ROM_DQ14
+Text Label 4350 3550 0    50   ~ 0
+ROM_DQ13
+Text Label 4350 3450 0    50   ~ 0
+ROM_DQ12
+Text Label 4350 3350 0    50   ~ 0
+ROM_DQ11
+Text Label 4350 3250 0    50   ~ 0
+ROM_DQ10
+Text Label 4350 3150 0    50   ~ 0
+ROM_DQ9
+Text Label 4350 3050 0    50   ~ 0
+ROM_DQ8
+Text Label 4350 2850 0    50   ~ 0
+ROM_DQ7
+Text Label 4350 2750 0    50   ~ 0
+ROM_DQ6
+Text Label 4350 2650 0    50   ~ 0
+ROM_DQ5
+Text Label 4350 2550 0    50   ~ 0
+ROM_DQ4
+Text Label 4350 2450 0    50   ~ 0
+ROM_DQ3
+Text Label 4350 2350 0    50   ~ 0
+ROM_DQ2
+Text Label 4350 2250 0    50   ~ 0
+ROM_DQ1
+Text Label 4350 2150 0    50   ~ 0
+ROM_DQ0
+Text Label 2100 4750 0    50   ~ 0
+ROM_/WE
+Text Label 2100 4650 0    50   ~ 0
+ROM_/OE
+Text Label 2100 4550 0    50   ~ 0
+ROM_/CE
+Text Label 2100 4350 0    50   ~ 0
+ROM_A22
+Text Label 2100 4250 0    50   ~ 0
+ROM_A21
+Text Label 2100 4150 0    50   ~ 0
+ROM_A20
+Text Label 2100 4050 0    50   ~ 0
+ROM_A19
+Text Label 2100 3950 0    50   ~ 0
+ROM_A18
+Text Label 2100 3850 0    50   ~ 0
+ROM_A17
+Text Label 2100 3750 0    50   ~ 0
+ROM_A16
+Text Label 2100 3650 0    50   ~ 0
+ROM_A15
+Text Label 2100 3550 0    50   ~ 0
+ROM_A14
+Text Label 2100 3450 0    50   ~ 0
+ROM_A13
+Text Label 2100 3350 0    50   ~ 0
+ROM_A12
+Text Label 2100 3250 0    50   ~ 0
+ROM_A11
+Text Label 2100 3150 0    50   ~ 0
+ROM_A10
+Text Label 2100 3050 0    50   ~ 0
+ROM_A9
+Text Label 2100 2950 0    50   ~ 0
+ROM_A8
+Text Label 2100 2850 0    50   ~ 0
+ROM_A7
+Text Label 2100 2750 0    50   ~ 0
+ROM_A6
+Text Label 2100 2650 0    50   ~ 0
+ROM_A5
+Text Label 2100 2550 0    50   ~ 0
+ROM_A4
+Text Label 2100 2450 0    50   ~ 0
+ROM_A3
+Text Label 2100 2350 0    50   ~ 0
+ROM_A2
+Text Label 2100 2250 0    50   ~ 0
+ROM_A1
+Text Label 2100 2150 0    50   ~ 0
+ROM_A0
+Text GLabel 2050 4550 0    50   Input ~ 0
+ROM_/CE
+Text GLabel 9000 4050 2    50   Input ~ 0
+RAM_/WE
+Text GLabel 9000 3950 2    50   Input ~ 0
+RAM_/OE
+Text GLabel 9000 3250 2    50   BiDi ~ 0
+RAM_DQ7
+Text GLabel 9000 3150 2    50   BiDi ~ 0
+RAM_DQ6
+Text GLabel 9000 3050 2    50   BiDi ~ 0
+RAM_DQ5
+Text GLabel 9000 2950 2    50   BiDi ~ 0
+RAM_DQ4
+Text GLabel 9000 2850 2    50   BiDi ~ 0
+RAM_DQ3
+Text GLabel 9000 2750 2    50   BiDi ~ 0
+RAM_DQ2
+Text GLabel 9000 2650 2    50   BiDi ~ 0
+RAM_DQ1
+Text GLabel 9000 2550 2    50   BiDi ~ 0
+RAM_DQ0
+Text GLabel 6300 4350 0    50   Input ~ 0
+RAM_A18
+Text GLabel 6300 4250 0    50   Input ~ 0
+RAM_A17
+Text GLabel 6300 4150 0    50   Input ~ 0
+RAM_A16
+Text GLabel 6300 4050 0    50   Input ~ 0
+RAM_A15
+Text GLabel 6300 3950 0    50   Input ~ 0
+RAM_A14
+Text GLabel 6300 3850 0    50   Input ~ 0
+RAM_A13
+Text GLabel 6300 3750 0    50   Input ~ 0
+RAM_A12
+Text GLabel 6300 3650 0    50   Input ~ 0
+RAM_A11
+Text GLabel 6300 3550 0    50   Input ~ 0
+RAM_A10
+Text GLabel 6300 3450 0    50   Input ~ 0
+RAM_A9
+Text GLabel 6300 3350 0    50   Input ~ 0
+RAM_A8
+Text GLabel 6300 3250 0    50   Input ~ 0
+RAM_A7
+Text GLabel 6300 3150 0    50   Input ~ 0
+RAM_A6
+Text GLabel 6300 3050 0    50   Input ~ 0
+RAM_A5
+Text GLabel 6300 2950 0    50   Input ~ 0
+RAM_A4
+Text GLabel 6300 2850 0    50   Input ~ 0
+RAM_A3
+Text GLabel 6300 2750 0    50   Input ~ 0
+RAM_A2
+Text GLabel 6300 2650 0    50   Input ~ 0
+RAM_A1
+Text GLabel 6300 2550 0    50   Input ~ 0
+RAM_A0
+Text GLabel 4750 4150 2    50   Input ~ 0
+ROM_/UB
+Text GLabel 4750 4050 2    50   Input ~ 0
+ROM_/LB
+Text GLabel 4750 3750 2    50   BiDi ~ 0
+ROM_DQ15
+Text GLabel 4750 3650 2    50   BiDi ~ 0
+ROM_DQ14
+Text GLabel 4750 3550 2    50   BiDi ~ 0
+ROM_DQ13
+Text GLabel 4750 3450 2    50   BiDi ~ 0
+ROM_DQ12
+Text GLabel 4750 3350 2    50   BiDi ~ 0
+ROM_DQ11
+Text GLabel 4750 3250 2    50   BiDi ~ 0
+ROM_DQ10
+Text GLabel 4750 3150 2    50   BiDi ~ 0
+ROM_DQ9
+Text GLabel 4750 3050 2    50   BiDi ~ 0
+ROM_DQ8
+Text GLabel 4750 2850 2    50   BiDi ~ 0
+ROM_DQ7
+Text GLabel 4750 2750 2    50   BiDi ~ 0
+ROM_DQ6
+Text GLabel 4750 2650 2    50   BiDi ~ 0
+ROM_DQ5
+Text GLabel 4750 2550 2    50   BiDi ~ 0
+ROM_DQ4
+Text GLabel 4750 2450 2    50   BiDi ~ 0
+ROM_DQ3
+Text GLabel 4750 2350 2    50   BiDi ~ 0
+ROM_DQ2
+Text GLabel 4750 2250 2    50   BiDi ~ 0
+ROM_DQ1
+Text GLabel 4750 2150 2    50   BiDi ~ 0
+ROM_DQ0
+Text GLabel 2050 4350 0    50   Input ~ 0
+ROM_A22
+Text GLabel 2050 4250 0    50   Input ~ 0
+ROM_A21
+Text GLabel 2050 4150 0    50   Input ~ 0
+ROM_A20
+Text GLabel 2050 4050 0    50   Input ~ 0
+ROM_A19
+Text GLabel 2050 3950 0    50   Input ~ 0
+ROM_A18
+Text GLabel 2050 3850 0    50   Input ~ 0
+ROM_A17
+Text GLabel 2050 3750 0    50   Input ~ 0
+ROM_A16
+Text GLabel 2050 3650 0    50   Input ~ 0
+ROM_A15
+Text GLabel 2050 3550 0    50   Input ~ 0
+ROM_A14
+Text GLabel 2050 3450 0    50   Input ~ 0
+ROM_A13
+Text GLabel 2050 3350 0    50   Input ~ 0
+ROM_A12
+Text GLabel 2050 3250 0    50   Input ~ 0
+ROM_A11
+Text GLabel 2050 3150 0    50   Input ~ 0
+ROM_A10
+Text GLabel 2050 3050 0    50   Input ~ 0
+ROM_A9
+Text GLabel 2050 2950 0    50   Input ~ 0
+ROM_A8
+Text GLabel 2050 2850 0    50   Input ~ 0
+ROM_A7
+Text GLabel 2050 2750 0    50   Input ~ 0
+ROM_A6
+Text GLabel 2050 2650 0    50   Input ~ 0
+ROM_A5
+Text GLabel 2050 2550 0    50   Input ~ 0
+ROM_A4
+Text GLabel 2050 2450 0    50   Input ~ 0
+ROM_A3
+Text GLabel 2050 2350 0    50   Input ~ 0
+ROM_A2
+Text GLabel 2050 2250 0    50   Input ~ 0
+ROM_A1
+Text GLabel 2050 2150 0    50   Input ~ 0
+ROM_A0
+NoConn ~ 4250 4550
+$Comp
+L GND #PWR036
+U 1 1 4BCA30BF
+P 4750 5400
+F 0 "#PWR036" H 4750 5400 30  0001 C CNN
+F 1 "GND" H 4750 5330 30  0001 C CNN
+	1    4750 5400
+	1    0    0    -1  
+$EndComp
+Text GLabel 2050 4750 0    50   Input ~ 0
+ROM_/WE
+Text GLabel 2050 4650 0    50   Input ~ 0
+ROM_/OE
+$Comp
+L C C502
+U 1 1 4BAD3D55
+P 3550 7000
+F 0 "C502" H 3600 7100 50  0000 L CNN
+F 1 "100n" H 3600 6900 50  0000 L CNN
+F 2 "SM0805_FIXEDMASK" H 3550 7000 60  0001 C CNN
+	1    3550 7000
+	1    0    0    -1  
+$EndComp
+$Comp
+L C C511
+U 1 1 4BAD3D53
+P 10150 2000
+F 0 "C511" H 10200 2100 50  0000 L CNN
+F 1 "100n" H 10200 1900 50  0000 L CNN
+F 2 "SM0805_FIXEDMASK" H 10150 2000 60  0001 C CNN
+	1    10150 2000
+	0    -1   1    0   
+$EndComp
+$Comp
+L C C501
+U 1 1 4BAD3D47
+P 3250 7000
+F 0 "C501" H 3300 7100 50  0000 L CNN
+F 1 "100n" H 3300 6900 50  0000 L CNN
+F 2 "SM0805_FIXEDMASK" H 3250 7000 60  0001 C CNN
+	1    3250 7000
+	1    0    0    -1  
+$EndComp
+$Comp
+L GND #PWR037
+U 1 1 4BAD3D2B
+P 3550 7300
+F 0 "#PWR037" H 3550 7300 30  0001 C CNN
+F 1 "GND" H 3550 7230 30  0001 C CNN
+	1    3550 7300
+	1    0    0    -1  
+$EndComp
+$Comp
+L +1.8V #PWR038
+U 1 1 4BAD3D27
+P 3550 6700
+F 0 "#PWR038" H 3550 6840 20  0001 C CNN
+F 1 "+1.8V" H 3550 6810 30  0000 C CNN
+	1    3550 6700
+	1    0    0    -1  
+$EndComp
+$Comp
+L GND #PWR039
+U 1 1 4BAD3D20
+P 3250 7300
+F 0 "#PWR039" H 3250 7300 30  0001 C CNN
+F 1 "GND" H 3250 7230 30  0001 C CNN
+	1    3250 7300
+	1    0    0    -1  
+$EndComp
+$Comp
+L +3.3V #PWR040
+U 1 1 4BAD3D0B
+P 3250 6700
+F 0 "#PWR040" H 3250 6660 30  0001 C CNN
+F 1 "+3.3V" H 3250 6810 30  0000 C CNN
+	1    3250 6700
+	1    0    0    -1  
+$EndComp
+$Comp
+L GND #PWR041
+U 1 1 4BAD33A7
+P 3400 5400
+F 0 "#PWR041" H 3400 5400 30  0001 C CNN
+F 1 "GND" H 3400 5330 30  0001 C CNN
+	1    3400 5400
+	1    0    0    -1  
+$EndComp
+$Comp
+L GND #PWR042
+U 1 1 4BAD339F
+P 7650 5000
+F 0 "#PWR042" H 7650 5000 30  0001 C CNN
+F 1 "GND" H 7650 4930 30  0001 C CNN
+	1    7650 5000
+	1    0    0    -1  
+$EndComp
+$Comp
+L +1.8V #PWR043
+U 1 1 4BAD32D2
+P 3300 1550
+F 0 "#PWR043" H 3300 1690 20  0001 C CNN
+F 1 "+1.8V" H 3300 1660 30  0000 C CNN
+	1    3300 1550
+	1    0    0    -1  
+$EndComp
+$Comp
+L +3.3V #PWR044
+U 1 1 4BAD32BE
+P 3500 1550
+F 0 "#PWR044" H 3500 1510 30  0001 C CNN
+F 1 "+3.3V" H 3500 1660 30  0000 C CNN
+	1    3500 1550
+	1    0    0    -1  
+$EndComp
+Text Notes 6300 5700 0    60   ~ 0
+4Mbits 45ns SRAM (battery RAM + custom chip work RAM)
+Text Notes 2650 5700 0    60   ~ 0
+128Mbits 70ns PSRAM (ROM area)
+$Comp
+L MT45W8MW16 U501
+U 1 1 4B868602
+P 3400 3450
+F 0 "U501" H 3400 3550 60  0000 C CNN
+F 1 "MT45W8MW16" H 3400 3450 60  0000 C CNN
+F 2 "VFBGA54" H 3400 3450 60  0001 C CNN
+	1    3400 3450
+	1    0    0    -1  
+$EndComp
+$EndSCHEMATC

pcb/kicad/RevE2/padreduce.sh

@@ -0,0 +1,17 @@
+cp "$1" "$1".bak
+
+sed -e 's/^%ADD\(..\)R/%ADD\1O/g' < "$1" > "$1".tmp1
+
+grep ^%ADD..O "$1".tmp1 | while read ln; do LS=${ln:0:8}; X=${ln:8:8}; Y=${ln:17:8}; X2=`echo $X-.001 | bc -l`; Y2=`echo $Y-.001 | bc -l`; echo $LS`printf '%01.6f' $X2`X`printf '%01.6f' $Y2`*%; done > "$1".tmp2
+
+grep ^%ADD..C "$1".tmp1 | while read ln; do LS=${ln:0:8}; X=${ln:8:8}; X2=`echo $X-.001 | bc -l`; echo $LS`printf '%01.6f' $X2`*%; done >> "$1".tmp2
+
+while read ln; do echo "$ln" | grep '^%ADD' >/dev/null && break; echo "$ln"; done < "$1".tmp1 > "$1"
+
+cat "$1".tmp2 >> "$1"
+
+grep -A100000 'G04 APERTURE END LIST\*' "$1".tmp1 >> "$1"
+
+rm "$1".tmp1 "$1".tmp2
+
+

pcb/kicad/RevE2/sd2snes.pro

@@ -0,0 +1,116 @@
+update=Wed 28 Dec 2011 06:55:00 PM CET
+version=1
+last_client=pcbnew
+[general]
+version=1
+[cvpcb]
+version=1
+NetIExt=net
+[cvpcb/libraries]
+EquName1=devcms
+[eeschema]
+version=1
+LibDir=../../kicad
+NetFmt=1
+HPGLSpd=20
+HPGLDm=15
+HPGLNum=1
+offX_A4=0
+offY_A4=0
+offX_A3=0
+offY_A3=0
+offX_A2=0
+offY_A2=0
+offX_A1=0
+offY_A1=0
+offX_A0=0
+offY_A0=0
+offX_A=0
+offY_A=0
+offX_B=0
+offY_B=0
+offX_C=0
+offY_C=0
+offX_D=0
+offY_D=0
+offX_E=0
+offY_E=0
+RptD_X=0
+RptD_Y=100
+RptLab=1
+LabSize=50
+[eeschema/libraries]
+LibName1=power
+LibName2=device
+LibName3=transistors
+LibName4=conn
+LibName5=linear
+LibName6=regul
+LibName7=74xx
+LibName8=cmos4000
+LibName9=adc-dac
+LibName10=memory
+LibName11=xilinx
+LibName12=special
+LibName13=microcontrollers
+LibName14=dsp
+LibName15=microchip
+LibName16=analog_switches
+LibName17=motorola
+LibName18=texas
+LibName19=intel
+LibName20=audio
+LibName21=interface
+LibName22=digital-audio
+LibName23=philips
+LibName24=display
+LibName25=cypress
+LibName26=siliconi
+LibName27=opto
+LibName28=atmel
+LibName29=contrib
+LibName30=valves
+LibName31=libs/snescart
+LibName32=libs/misc-74
+LibName33=libs/vreg
+LibName34=libs/lpc1754
+LibName35=libs/sd_card
+LibName36=libs/cy62148ev30
+LibName37=libs/mt45w8mw16
+LibName38=libs/cs4344
+LibName39=libs/double_sch_kcom
+LibName40=libs/usb_minib
+LibName41=libs/mic23250
+[pcbnew]
+version=1
+PadDrlX=512
+PadDimH=512
+PadDimV=512
+BoardThickness=630
+TxtPcbV=800
+TxtPcbH=600
+TxtModV=600
+TxtModH=600
+TxtModW=120
+VEgarde=40
+DrawLar=70
+EdgeLar=40
+TxtLar=120
+MSegLar=79
+LastNetListRead=sd2snes.net
+[pcbnew/libraries]
+LibDir=../../kicad
+LibName1=sockets
+LibName2=connect
+LibName3=discret
+LibName4=pin_array
+LibName5=divers
+LibName6=libcms
+LibName7=display
+LibName8=valves
+LibName9=led
+LibName10=dip_sockets
+LibName11=libs/mypackages
+LibName12=libs/snescart
+LibName13=libs/sdcard
+LibName14=libs/snail

pcb/kicad/RevE2/sd2snes.sch

@@ -0,0 +1,94 @@
+EESchema Schematic File Version 2  date Mon 02 Jan 2012 11:27:18 PM CET
+LIBS:power
+LIBS:device
+LIBS:transistors
+LIBS:conn
+LIBS:linear
+LIBS:regul
+LIBS:74xx
+LIBS:cmos4000
+LIBS:adc-dac
+LIBS:memory
+LIBS:xilinx
+LIBS:special
+LIBS:microcontrollers
+LIBS:dsp
+LIBS:microchip
+LIBS:analog_switches
+LIBS:motorola
+LIBS:texas
+LIBS:intel
+LIBS:audio
+LIBS:interface
+LIBS:digital-audio
+LIBS:philips
+LIBS:display
+LIBS:cypress
+LIBS:siliconi
+LIBS:opto
+LIBS:atmel
+LIBS:contrib
+LIBS:valves
+LIBS:snescart
+LIBS:misc-74
+LIBS:vreg
+LIBS:lpc1754
+LIBS:sd_card
+LIBS:cy62148ev30
+LIBS:mt45w8mw16
+LIBS:cs4344
+LIBS:double_sch_kcom
+LIBS:usb_minib
+LIBS:mic23250
+LIBS:sd2snes-cache
+EELAYER 25  0
+EELAYER END
+$Descr A4 11700 8267
+encoding utf-8
+Sheet 1 6
+Title "sd2snes Mark II"
+Date "2 jan 2012"
+Rev "E2"
+Comp "Maximilian Rehkopf"
+Comment1 ""
+Comment2 ""
+Comment3 ""
+Comment4 ""
+$EndDescr
+Wire Notes Line
+	3650 4200 6150 4200
+Text Notes 3300 3250 0    100  ~ 0
+Changes from Rev.A / TODO:\n [x] remove FPGA from JTAG chain\n [x] remove SNES IRQ_DIR+IRQ, replace with IRQ_OE. IRQ is unidirectional cart -> console\n      (replace 1gate w/ transistor)\n [x] disconnect P2.10 from FPGA, using a different GPIO for IRQ / INIT_B\n [x] add pullup to P2.10\n [ ] add JTAG pullups\n [x] add series resistor for CPU_CLK\n [x] add a jumper in PIC MCLR line to MCU\n [x] change PIC to DIP8 type for easier preprogramming\n [x] change "P1" to "P401" in pin description in silk screen\n [x] filter CIC data lines\n [x] rearrange SD card interface/LEDs on MCU\n [x] RAs for SNES signals?\n [x] reroute/add decoupling capacitors\n [x] filter SNES control signals (RD, WR, PARD, PAWR, CPU_CLK, IRQ)\n [x] replace 4Mbit SRAM with much cheaper TSOP-II type\n [x] add inverse polarity protection\n [x] separate GND plane for DAC\n [ ] separate JTAG pads for FPGA\n [x] add USE_BATT jumper\n [x] move PROG_B to P1.15
+$Sheet
+S 1250 1250 1700 1250
+U 4B6E16F2
+F0 "SNES Slot" 60
+F1 "snesslot.sch" 60
+$EndSheet
+Text Notes 750  7700 0    500  ~ 100
+sd2snes Mark II
+$Sheet
+S 1250 3300 1600 1150
+U 4BAA6ABD
+F0 "Memory" 60
+F1 "memory.sch" 60
+$EndSheet
+$Sheet
+S 8050 1250 1600 1250
+U 4B6ED75B
+F0 "MCU" 60
+F1 "mcu.sch" 60
+$EndSheet
+$Sheet
+S 5900 1250 1600 1250
+U 4B6EC9C3
+F0 "Power Supply / Misc." 60
+F1 "pwr_misc.sch" 60
+$EndSheet
+$Sheet
+S 3650 1250 1650 1250
+U 4B6E18FC
+F0 "FPGA" 60
+F1 "fpga.sch" 60
+$EndSheet
+$EndSCHEMATC

pcb/kicad/libs/mypackages.mod

@@ -1,4 +1,4 @@
-PCBNEW-LibModule-V1  Wed 14 Sep 2011 12:39:55 AM CEST
+PCBNEW-LibModule-V1  Tue 27 Dec 2011 12:29:40 AM CET
 # encoding utf-8
 $INDEX
 BT_KEYSTONE_1059_20MM
@@ -7,11 +7,14 @@ DIP-36
 HC49US
 LED-3MM-FIXED
 LQFP80-.5
+L_4.2X4.2
 PAD_1x1mm
 PQFP208_ALTPADS
 QFN10-2x2
 QFN10-2x2_LONGPADS
 R_PACK_0804
+R_PACK_0804_LONGPADS
+R_PACK_1206
 SM0805_FIXEDMASK
 SM1210L
 SM1210L_NEW
@@ -23,7 +26,9 @@ TSOP40
 TSOPII-32
 TSOPII-44
 TSSOP10
+TSSOP10_LONGPADS
 TSSOP48
+TSSOP48_LONGPADS
 USB-MINIB-THT
 VFBGA36
 VFBGA48
@@ -4107,41 +4112,6 @@ Of 0.000000 0.000000 0.000000
 Ro 0.000000 0.000000 0.000000
 $EndSHAPE3D
 $EndMODULE  SM1210L_NEW
-$MODULE LED-3MM-FIXED
-Po 0 0 0 15 4D251EA9 00000000 ~~
-Li LED-3MM-FIXED
-Cd LED 3mm - Lead pitch 100mil (2,54mm)
-Kw LED led 3mm 3MM 100mil 2,54mm
-Sc 00000000
-AR /4B6ED75B/4C0DA78D
-Op 0 0 0
-At VIRTUAL
-T0 -300 -2125 320 320 0 70 N V 21 N"D403"
-T1 25 3575 320 320 2700 70 N V 21 N"LED_2mA_1.7V,_red"
-DS 669 669 669 394 80 21
-DS 669 -669 669 -394 80 21
-DA 0 0 669 669 2700 80 21
-$PAD
-Sh "1" C 660 660 0 0 0
-Dr 400 0 0
-At STD N 00E8FFFF
-Ne 1 "+3.3V"
-Po -500 0
-$EndPAD
-$PAD
-Sh "2" C 660 660 0 0 0
-Dr 400 0 0
-At STD N 00E8FFFF
-Ne 2 "N-000262"
-Po 500 0
-$EndPAD
-$SHAPE3D
-Na "libs/led3_vertical_red.wrl"
-Sc 1.000000 1.000000 1.000000
-Of 0.000000 0.000000 0.000000
-Ro 0.000000 0.000000 0.000000
-$EndSHAPE3D
-$EndMODULE  LED-3MM-FIXED
 $MODULE HC49US
 Po 0 0 0 15 4D2590A9 00000000 ~~
 Li HC49US
@@ -5668,4 +5638,638 @@ Ne 33 "N-000035"
 Po -3828 1870
 $EndPAD
 $EndMODULE  TSOP40
+$MODULE R_PACK_1206
+Po 0 0 0 15 4EF2E0E8 00000000 ~~
+Li R_PACK_1206
+Sc 00000000
+AR R_PACK_1206
+Op 0 0 0
+T0 0 0 600 600 0 120 N V 21 N "R_PACK_1206"
+T1 0 0 600 600 0 120 N V 21 N "VAL**"
+DS -866 -827 866 -827 79 21
+DS 866 -827 866 827 79 21
+DS 866 827 -866 827 79 21
+DS -866 827 -866 -827 79 21
+$PAD
+Sh "1" R 248 453 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -510 384
+$EndPAD
+$PAD
+Sh "2" R 173 453 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -157 384
+$EndPAD
+$PAD
+Sh "3" R 173 453 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 157 384
+$EndPAD
+$PAD
+Sh "4" R 248 453 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 510 384
+$EndPAD
+$PAD
+Sh "5" R 248 453 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 510 -384
+$EndPAD
+$PAD
+Sh "6" R 173 453 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 157 -384
+$EndPAD
+$PAD
+Sh "7" R 173 453 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -157 -384
+$EndPAD
+$PAD
+Sh "8" R 248 453 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -510 -384
+$EndPAD
+$EndMODULE  R_PACK_1206
+$MODULE R_PACK_0804_LONGPADS
+Po 0 0 0 15 4EF2E2A7 00000000 ~~
+Li R_PACK_0804_LONGPADS
+Sc 00000000
+AR
+Op 0 0 0
+T0 0 0 320 320 0 70 N V 21 N "R_PACK_0804"
+T1 0 0 320 320 0 70 N V 21 N "VAL**"
+DS 551 591 551 -591 79 21
+DS -551 -591 -551 591 79 21
+DS -551 -591 551 -591 79 21
+DS 551 591 -551 591 79 21
+$PAD
+Sh "7" R 118 354 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -98 -276
+$EndPAD
+$PAD
+Sh "6" R 118 354 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 98 -276
+$EndPAD
+$PAD
+Sh "2" R 118 354 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -98 276
+$EndPAD
+$PAD
+Sh "3" R 118 354 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 98 276
+$EndPAD
+$PAD
+Sh "8" R 197 354 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -335 -276
+$EndPAD
+$PAD
+Sh "5" R 197 354 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 335 -276
+$EndPAD
+$PAD
+Sh "4" R 197 354 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 335 276
+$EndPAD
+$PAD
+Sh "1" R 197 354 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -335 276
+$EndPAD
+$EndMODULE  R_PACK_0804_LONGPADS
+$MODULE TSSOP10_LONGPADS
+Po 0 0 0 15 4EF2E58B 00000000 ~~
+Li TSSOP10_LONGPADS
+Sc 00000000
+AR
+Op 0 0 0
+T0 0 0 600 600 0 120 N V 21 N "Test"
+T1 0 0 600 600 0 120 N V 21 N "VAL**"
+DC -394 394 -315 394 60 21
+DS -590 -590 590 -590 60 21
+DS 590 -590 590 590 60 21
+DS -590 590 590 590 60 21
+DS -590 -590 -590 590 60 21
+$PAD
+Sh "1" R 118 551 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -393 965
+$EndPAD
+$PAD
+Sh "2" R 118 551 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -196 965
+$EndPAD
+$PAD
+Sh "3" R 118 551 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 0 965
+$EndPAD
+$PAD
+Sh "4" R 118 551 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 196 965
+$EndPAD
+$PAD
+Sh "5" R 118 551 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 393 965
+$EndPAD
+$PAD
+Sh "6" R 118 551 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 393 -965
+$EndPAD
+$PAD
+Sh "7" R 118 551 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 196 -965
+$EndPAD
+$PAD
+Sh "8" R 118 551 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 0 -965
+$EndPAD
+$PAD
+Sh "9" R 118 551 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -196 -965
+$EndPAD
+$PAD
+Sh "10" R 118 551 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -393 -965
+$EndPAD
+$EndMODULE  TSSOP10_LONGPADS
+$MODULE TSSOP48_LONGPADS
+Po 0 0 0 15 4B6E17E6 00000000 ~~
+Li TSSOP48_LONGPADS
+Sc 00000000
+AR
+Op 0 0 0
+T0 0 -551 600 600 0 120 N V 21 N "Test"
+T1 0 630 600 600 0 120 N V 21 N "VAL**"
+DC -2205 945 -2087 945 40 21
+DS -2460 -1200 2460 -1200 47 21
+DS 2460 -1200 2460 1200 47 21
+DS -2460 1200 2460 1200 47 21
+DS -2460 -1200 -2460 1200 47 21
+$PAD
+Sh "1" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -2263 1614
+$EndPAD
+$PAD
+Sh "2" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -2066 1614
+$EndPAD
+$PAD
+Sh "3" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -1870 1614
+$EndPAD
+$PAD
+Sh "4" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -1673 1614
+$EndPAD
+$PAD
+Sh "5" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -1476 1614
+$EndPAD
+$PAD
+Sh "6" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -1279 1614
+$EndPAD
+$PAD
+Sh "7" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -1082 1614
+$EndPAD
+$PAD
+Sh "8" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -885 1614
+$EndPAD
+$PAD
+Sh "9" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -688 1614
+$EndPAD
+$PAD
+Sh "10" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -492 1614
+$EndPAD
+$PAD
+Sh "11" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -295 1614
+$EndPAD
+$PAD
+Sh "12" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -98 1614
+$EndPAD
+$PAD
+Sh "13" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 98 1614
+$EndPAD
+$PAD
+Sh "14" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 295 1614
+$EndPAD
+$PAD
+Sh "15" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 492 1614
+$EndPAD
+$PAD
+Sh "16" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 688 1614
+$EndPAD
+$PAD
+Sh "17" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 885 1614
+$EndPAD
+$PAD
+Sh "18" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 1082 1614
+$EndPAD
+$PAD
+Sh "19" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 1279 1614
+$EndPAD
+$PAD
+Sh "20" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 1476 1614
+$EndPAD
+$PAD
+Sh "21" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 1673 1614
+$EndPAD
+$PAD
+Sh "22" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 1870 1614
+$EndPAD
+$PAD
+Sh "23" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 2066 1614
+$EndPAD
+$PAD
+Sh "24" R 118 630 0 0 1800
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 2263 1614
+$EndPAD
+$PAD
+Sh "25" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 2263 -1614
+$EndPAD
+$PAD
+Sh "26" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 2066 -1614
+$EndPAD
+$PAD
+Sh "27" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 1870 -1614
+$EndPAD
+$PAD
+Sh "28" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 1673 -1614
+$EndPAD
+$PAD
+Sh "29" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 1476 -1614
+$EndPAD
+$PAD
+Sh "30" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 1279 -1614
+$EndPAD
+$PAD
+Sh "31" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 1082 -1614
+$EndPAD
+$PAD
+Sh "32" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 885 -1614
+$EndPAD
+$PAD
+Sh "33" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 688 -1614
+$EndPAD
+$PAD
+Sh "34" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 492 -1614
+$EndPAD
+$PAD
+Sh "35" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 295 -1614
+$EndPAD
+$PAD
+Sh "36" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 98 -1614
+$EndPAD
+$PAD
+Sh "37" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -98 -1614
+$EndPAD
+$PAD
+Sh "38" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -295 -1614
+$EndPAD
+$PAD
+Sh "39" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -492 -1614
+$EndPAD
+$PAD
+Sh "40" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -688 -1614
+$EndPAD
+$PAD
+Sh "41" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -885 -1614
+$EndPAD
+$PAD
+Sh "42" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -1082 -1614
+$EndPAD
+$PAD
+Sh "43" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -1279 -1614
+$EndPAD
+$PAD
+Sh "44" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -1476 -1614
+$EndPAD
+$PAD
+Sh "45" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -1673 -1614
+$EndPAD
+$PAD
+Sh "46" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -1870 -1614
+$EndPAD
+$PAD
+Sh "47" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -2066 -1614
+$EndPAD
+$PAD
+Sh "48" R 118 630 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -2263 -1614
+$EndPAD
+$EndMODULE  TSSOP48_LONGPADS
+$MODULE L_4.2X4.2
+Po 0 0 0 15 4EF777D2 00000000 ~~
+Li L_4.2X4.2
+Sc 00000000
+AR
+Op 0 0 0
+T0 0 0 600 600 0 120 N V 21 N "L_4.2X4.2"
+T1 0 0 600 600 0 120 N V 21 N "VAL**"
+DS -1024 -984 1024 -984 79 21
+DS 1024 -984 1024 984 79 21
+DS 1024 984 -1024 984 79 21
+DS -1024 984 -1024 -984 79 21
+$PAD
+Sh "1" R 591 1654 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -571 0
+$EndPAD
+$PAD
+Sh "2" R 591 1654 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 571 0
+$EndPAD
+$EndMODULE  L_4.2X4.2
+$MODULE LED-3MM-FIXED
+Po 0 0 0 15 4EF9035D 00000000 ~~
+Li LED-3MM-FIXED
+Cd LED 3mm - Lead pitch 100mil (2,54mm)
+Kw LED led 3mm 3MM 100mil 2,54mm
+Sc 00000000
+AR /4B6ED75B/4C0DA78D
+Op 0 0 0
+At VIRTUAL 
+T0 -300 -2125 320 320 0 70 N V 21 N "D403"
+T1 25 3575 320 320 2700 70 N V 21 N "LED_2mA_1.7V,_red"
+DS 669 669 669 394 80 21
+DS 669 -669 669 -394 80 21
+DA 0 0 669 669 2700 80 21
+$PAD
+Sh "1" C 660 660 0 0 0
+Dr 400 0 0
+At STD N 00E0FFFF
+Ne 1 "+3.3V"
+Po -500 0
+$EndPAD
+$PAD
+Sh "2" C 660 660 0 0 0
+Dr 400 0 0
+At STD N 00E0FFFF
+Ne 2 "N-000262"
+Po 500 0
+$EndPAD
+$SHAPE3D
+Na "libs/led3_vertical_red.wrl"
+Sc 1.000000 1.000000 1.000000
+Of 0.000000 0.000000 0.000000
+Ro 0.000000 0.000000 0.000000
+$EndSHAPE3D
+$EndMODULE  LED-3MM-FIXED
 $EndLIBRARY

pcb/kicad/libs/sdcard.bak

@@ -1,7 +1,8 @@
-PCBNEW-LibModule-V1  Mon 26 Jul 2010 02:13:00 PM CEST
+PCBNEW-LibModule-V1  Tue 27 Dec 2011 01:25:51 AM CET
+# encoding utf-8
 $INDEX
-SD-RSMT-2-MQ-WF
 HRS-DM1AA
+SD-RSMT-2-MQ-WF
 $EndINDEX
 $MODULE SD-RSMT-2-MQ-WF
 Po 0 0 0 15 4C4D74E3 00000000 ~~
@@ -124,40 +125,39 @@ Po 3740 709
 $EndPAD
 $EndMODULE  SD-RSMT-2-MQ-WF
 $MODULE HRS-DM1AA
-Po 0 0 0 15 4C4D706D 00000000 ~~
+Po 0 0 0 15 4EF9108C 00000000 ~~
 Li HRS-DM1AA
 Sc 00000000
-AR 
+AR HRS-DM1AA
 Op 0 0 0
-T0 0 0 300 300 0 60 N V 21 N"HRS-DM1AA"
-T1 0 0 300 300 0 60 N V 21 N"VAL**"
-DS -5906 4725 -5906 4686 120 21
-DS 5905 6025 5905 4686 120 21
-DS 5905 -2637 5905 3584 120 21
-DS 5905 -5983 5905 -3779 120 21
+T0 0 0 300 300 0 60 N V 21 N "HRS-DM1AA"
+T1 0 0 300 300 0 60 N V 21 N "VAL**"
+DS 4134 -5984 5512 -5984 120 21
+DS 5512 6024 -5512 6024 120 21
+DS -5512 -5984 -4685 -5984 120 21
+DS -5512 4685 -5512 6024 120 21
+DS 5511 6025 5511 4686 120 21
+DS 5511 -2637 5511 3584 120 21
+DS 5511 -5983 5511 -3779 120 21
 DS 4133 -5511 3779 -5511 120 21
 DS -4686 -5511 -4529 -5511 120 21
-DS -5906 6025 -5906 4725 120 21
-DS -5906 2521 -5906 2796 120 21
-DS -5906 -983 -5906 1773 120 21
-DS -5906 -2637 -5906 -1731 120 21
-DS -5906 -5983 -5906 -3779 120 21
-DS -5906 -5983 -4686 -5983 120 21
+DS -5512 2521 -5512 2796 120 21
+DS -5512 -983 -5512 1773 120 21
+DS -5512 -2637 -5512 -1731 120 21
+DS -5512 -5983 -5512 -3779 120 21
 DS -4686 -5983 -4686 -5511 120 21
 DS 4133 -5511 4133 -5983 120 21
-DS 4133 -5983 5905 -5983 120 21
-DS 5905 6025 -5906 6025 120 21
 $PAD
-Sh "~" C 512 512 0 0 0
+Sh "~" C 510 510 0 0 0
 Dr 512 0 0
-At STD N 00E0FFFF
+At STD N 0000FFFF
 Ne 0 ""
 Po -4686 -4999
 $EndPAD
 $PAD
-Sh "~" C 512 512 0 0 0
+Sh "~" C 510 510 0 0 0
 Dr 512 0 0
-At STD N 00E0FFFF
+At STD N 0000FFFF
 Ne 0 ""
 Po 4133 -4999
 $EndPAD

pcb/kicad/libs/sdcard.mod

@@ -1,7 +1,8 @@
-PCBNEW-LibModule-V1  Mon 26 Jul 2010 09:33:33 PM CEST
+PCBNEW-LibModule-V1  Tue 27 Dec 2011 12:52:27 PM CET
+# encoding utf-8
 $INDEX
-SD-RSMT-2-MQ-WF
 HRS-DM1AA
+SD-RSMT-2-MQ-WF
 $EndINDEX
 $MODULE SD-RSMT-2-MQ-WF
 Po 0 0 0 15 4C4D74E3 00000000 ~~
@@ -124,13 +125,13 @@ Po 3740 709
 $EndPAD
 $EndMODULE  SD-RSMT-2-MQ-WF
 $MODULE HRS-DM1AA
-Po 0 0 0 15 4C4DE307 00000000 ~~
+Po 0 0 0 15 4EF9108C 00000000 ~~
 Li HRS-DM1AA
 Sc 00000000
-AR 
+AR HRS-DM1AA
 Op 0 0 0
-T0 0 0 300 300 0 60 N V 21 N"HRS-DM1AA"
-T1 0 0 300 300 0 60 N V 21 N"VAL**"
+T0 0 0 300 300 0 60 N V 21 N "HRS-DM1AA"
+T1 0 0 300 300 0 60 N V 21 N "VAL**"
 DS 4134 -5984 5512 -5984 120 21
 DS 5512 6024 -5512 6024 120 21
 DS -5512 -5984 -4685 -5984 120 21
@@ -149,14 +150,14 @@ DS 4133 -5511 4133 -5983 120 21
 $PAD
 Sh "~" C 512 512 0 0 0
 Dr 512 0 0
-At STD N 00E0FFFF
+At STD N 0000FFFF
 Ne 0 ""
 Po -4686 -4999
 $EndPAD
 $PAD
 Sh "~" C 512 512 0 0 0
 Dr 512 0 0
-At STD N 00E0FFFF
+At STD N 0000FFFF
 Ne 0 ""
 Po 4133 -4999
 $EndPAD

snes/Makefile

@@ -1,19 +1,23 @@
-OBJS = header.ips reset.o65 main.o65 font.o65 palette.o65 data.o65 const.o65 logo.o65 logospr.o65 text.o65 dma.o65 menu.o65 pad.o65 time.o65 mainmenu.o65 # gfx.o65 # vars.o65
+OBJS = header.ips reset.o65 main.o65 font.o65 palette.o65 data.o65 const.o65 logo.o65 logospr.o65 text.o65 dma.o65 menu.o65 pad.o65 time.o65 mainmenu.o65 sysinfo.o65 # gfx.o65 # vars.o65
 
-all: menu.bin
+all: clean menu.bin map
 
 smc: menu.bin
 	cat menu.bin sd2snes.rom > menu.smc
+
+map: menu.bin
+	utils/mkmap.sh $(OBJS)
+
 menu.bin: $(OBJS)
-	sneslink -fsmc -o $@ $^
+	sneslink -fsmc -o $@ $^ 2>&1 | tee link.log
 
 # Generic rule to create .o65 out from .a65
 %.o65: %.a65
-	snescom -J -Wall -o $@ $<
+	snescom -J -Wall -o $@ $< 2>&1 | tee $@.log
 
 # Generic rule to create .ips out from .a65
 %.ips: %.a65
-	snescom -I -J -Wall -o $@ $<
+	snescom -I -J -Wall -o $@ $< 2>&1 | tee $@.log
 
 clean:
 	rm -f *.ips *.o65 *~ menu.bin

snes/const.a65

@@ -136,8 +136,10 @@ window_nh	.byt 24
 window_sh	.byt 25
 window_wv	.byt 26
 window_ev	.byt 27
-text_clkset	.byt 28,"Please set the clock.", 29,0
-text_buttonB	.byt "Dpad: sel/chg, B: OK", 0
+window_tl	.byt 28
+window_tr	.byt 29
+text_clkset	.byt "Please set the clock.", 0
+text_buttonB	.byt "Dpad: sel/chg, A: OK", 0
 time_win_x	.byt 18
 time_win_y	.byt 15
 time_win_w	.byt 27
@@ -146,7 +148,11 @@ main_win_x	.byt 18
 main_win_y	.byt 11
 main_win_w	.byt 27
 main_win_h	.byt 13
-text_mainmenu	.byt 28,"Main Menu", 29, 0
+text_mainmenu	.byt "Main Menu", 0
+sysinfo_win_x	.byt 10
+sysinfo_win_y	.byt 9
+sysinfo_win_w	.byt 43
+sysinfo_win_h	.byt 17
 
 text_mm_file		.byt "File Browser", 0
 text_mm_last		.byt "Run last game", 0
@@ -154,5 +160,5 @@ text_mm_time		.byt "Set Clock", 0
 text_mm_scic		.byt "Enable SuperCIC", 0
 text_mm_vmode_menu	.byt "Menu video mode", 0
 text_mm_vmode_game	.byt "Game video mode", 0
-
-text_statusbar_keys	.byt "B:Select A:Back X:Menu", 0
+text_mm_sysinfo		.byt "System Information", 0
+text_statusbar_keys	.byt "A:Select B:Back X:Menu", 0

snes/data.a65

@@ -1,15 +1,16 @@
+*=$7E0000
 .data
 ;don't anger the stack!
 dirptr_addr	.word	0
-dirptr_bank	.byt	0
+dirptr_bank	.word	0
 dirstart_addr	.word	0
-dirstart_bank	.byt	0
-dirend_addr	.word 	0
-dirend_bank	.byt	0
+dirstart_bank	.word	0
+dirend_addr	.word	0
+dirend_bank	.word	0
 dirend_idx	.word	0
 dirptr_idx	.word	0
-dirent_addr	.word 0
-dirent_bank	.byt 0
+dirent_addr	.word	0
+dirent_bank	.word	0
 dirent_type	.byt 0
 dirend_onscreen	.byt 0
 dirlog_idx	.byt 0,0,0 ; long ptr
@@ -77,6 +78,7 @@ time_y10	.byt 0
 time_y100	.byt 0
 time_sel	.byt 0
 time_exit	.byt 0
+time_cancel	.byt 0
 time_ptr	.byt 0
 time_tmp	.byt 0
 ;--

snes/header.a65

@@ -1,6 +1,16 @@
-; This file is part of the snescom-asm demo - a demo of how to build a SNES program.
+; This file is a modified version of the header.a65 file from:
+; snescom-asm demo - a demo of how to build a SNES program.
 ; See http://bisqwit.iki.fi/source/snescom.html for details.
 
+; fill whole area beforehand so the linker does not create multiple
+; objects from it. (necessary for map creation)
+
+*= $C0FF00
+	.word 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+	.word 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+	.word 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+	.word 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+
 ; Begin assembling to this address.
 *= $C0FF00
 

snes/mainmenu.a65

@@ -1,6 +1,6 @@
 #include "memmap.i65"
 ;number of menu entries
-main_entries    .byt 1
+main_entries    .byt 2
 ;menu entry data
 main_enttab     ;Set Clock
 		.word !text_mm_time
@@ -8,6 +8,11 @@ main_enttab     ;Set Clock
                 .word !time_init-1
                 .byt ^time_init
                 .byt 1, 0
+                ;System Information
+                .word !text_mm_sysinfo
+                .byt ^text_mm_sysinfo
+                .word !show_sysinfo-1
+		.byt ^show_sysinfo
                 ;SuperCIC
 		.word !text_mm_scic
                 .byt ^text_mm_scic
@@ -115,13 +120,13 @@ mm_menuloop
 	and pad1trig+1
 	bne mmkey_b
 	bra mm_menuloop
-mmkey_a
+mmkey_b
 	jsr restore_screen
 	plp
 	rts
 
-mmkey_b
-	jsr mmkey_b_2
+mmkey_a
+	jsr mmkey_a_2
 	jmp mm_redraw
 
 mmkey_down
@@ -151,10 +156,10 @@ mmkey_up_2
 +
 	rts
 
-mmkey_b_2
+mmkey_a_2
 	jsr restore_screen
 	phk			; push return bank for subroutine
-	per mmkey_b_2_return-1	; push return addr for subroutine
+	per mmkey_a_2_return-1	; push return addr for subroutine
 	xba
 	lda #$00
 	xba
@@ -170,7 +175,7 @@ mmkey_b_2
 	pha			; push subroutine addr
 	sep #$20 : .as
 	rtl			; jump to subroutine
-mmkey_b_2_return
+mmkey_a_2_return
 	rts
 
 mm_do_refresh

snes/memmap.i65

@@ -20,5 +20,8 @@
 #define AVR_CMD		$307000
 #define AVR_PARAM	$307004
 #define RTC_STATUS	$307100
+#define SYSINFO_BLK	$307110
 
 #define ROOT_DIR	$C10000
+
+#define CMD_SYSINFO	$03

snes/menu.a65

@@ -188,52 +188,42 @@ redraw_filelist_loop
 	lsr
 	cmp listdisp
 	beq redraw_filelist_last
-	lda dirptr_bank
-	phb
-	pha
-	plb
 	rep #$20 : .al
-	lda (dirptr_addr), y
+	lda [dirptr_addr], y
 	sta @dirent_addr
 	iny
 	iny
 	sep #$20 : .as
-	lda (dirptr_addr), y       ; load fileinfo bank
+	lda [dirptr_addr], y	   ; load fileinfo bank
 	clc
 	adc #$c0                   ; add $C0 for memory map
 	sta @dirent_bank           ; store as current bank
 	cmp #$c0                   ; if bank was 0 -> dirend entry in DB
 	beq redraw_filelist_dirend ; handle dirend
 	iny
-	lda (dirptr_addr), y
+	lda [dirptr_addr], y
 	iny
 	sta @dirent_type
-	plb
 	sty dirptr_idx
 	jsr print_direntry
 	bra redraw_filelist_loop
 redraw_filelist_dirend
-	plb
 	dey                        ; recover last valid direntry number
 	dey                        ; (we had 2x iny of the direntry pointer above,
+	beq +
 	dey                        ;  so account for those too)
 	dey
 	dey
 	dey
-	sty dirend_idx             ; dirend_idx <- last valid directory entry.
++	sty dirend_idx             ; dirend_idx <- last valid directory entry.
 	lda #$01                   ; encountered during redraw, so must be on screen
 	sta dirend_onscreen
 	bra redraw_filelist_out
 redraw_filelist_last	;check if next offscreen item is end of dir
-	lda dirptr_bank
-	phb
-	pha
-	plb
 	iny
 	iny
-	lda (dirptr_addr), y
+	lda [dirptr_addr], y
 	beq redraw_filelist_dirend
-	plb
 redraw_filelist_out
 	ldx #$0000
 	stx dirptr_idx
@@ -352,7 +342,7 @@ menu_key_down:
 	lda listdisp
 	dec
 	cmp menu_sel
-	bne +
+	bne down_noscroll
 	lda #$01
 	sta menu_dirty
 	lda dirend_onscreen
@@ -361,10 +351,13 @@ menu_key_down:
 	lda dirptr_addr
 	clc
 	adc #$04
-	sta dirptr_addr
+	bcc +
+	inc dirptr_bank
++	sta dirptr_addr
 	sep #$20 : .as
 	rts
-+	lda dirend_onscreen
+down_noscroll
+	lda dirend_onscreen
 	beq +
 	lda dirend_idx
 	lsr
@@ -380,7 +373,7 @@ down_out
 
 menu_key_up:
 	lda menu_sel
-	bne +
+	bne up_noscroll
 	lda #$01
 	sta menu_dirty
 	rep #$20 : .al
@@ -389,9 +382,12 @@ menu_key_up:
 	beq up_out
 	sec
 	sbc #$04
-	sta dirptr_addr
+	bcs +
+	dec dirptr_bank
++	sta dirptr_addr
 	bra up_out
-+	dec
+up_noscroll
+	dec
 	sta menu_sel
 up_out
 	sep #$20 : .as
@@ -446,7 +442,7 @@ menu_key_right:
 	sep #$20 : .as
 	rts
 
-menu_key_b:
+menu_key_a:
 	jsr select_item
 	rts
 
@@ -460,15 +456,15 @@ do_setup448
 	jsr setup_448
 	rts
 
-menu_key_a:
+menu_key_b:
 	rep #$20 : .al
 	lda dirstart_addr
-	beq skip_key_a
+	beq skip_key_b
 	sta dirptr_addr
 	lda #$0000
 	sta menu_sel
 	bra select_item
-skip_key_a
+skip_key_b
 	sep #$20 : .as
 	rts
 
@@ -480,14 +476,10 @@ select_item:
 	asl
 	tay
 	sep #$20 : .as
-	lda dirptr_bank
-	phb
-	pha
-	plb
 	iny
 	iny
 	iny
-	lda (dirptr_addr), y
+	lda [dirptr_addr], y
 	cmp #$01
 	beq sel_is_file
 	cmp #$04
@@ -497,7 +489,6 @@ select_item:
 	cmp #$81
 	beq sel_is_parent
 select_item_cont
-	plb
 	rts
 sel_is_file
 	jsr select_file
@@ -513,12 +504,12 @@ select_file:
 	; have avr load the rom
 	dey
 	rep #$20 : .al
-	lda (dirptr_addr), y
+	lda [dirptr_addr], y
 	and #$00ff
 	sta @AVR_PARAM+2
 	dey
 	dey
-	lda (dirptr_addr), y
+	lda [dirptr_addr], y
 	sta @AVR_PARAM
 	sep #$20 : .as
 	lda #$01
@@ -559,14 +550,14 @@ select_dir:
 ; y = direntry ptr
 	txy
 	dey
-	lda (dirptr_addr), y
+	lda [dirptr_addr], y
 	clc
 	adc #$c0
 	sta @dirent_bank
 	dey
 	dey
 	rep #$20 : .al
-	lda (dirptr_addr), y
+	lda [dirptr_addr], y
 	sta @dirent_addr
 	tax
 	sep #$20 : .as

snes/tests/Makefile

@@ -0,0 +1,17 @@
+OBJS = header.ips reset.o65 tests.o65
+
+all: test.bin
+
+test.bin: $(OBJS)
+	sneslink -fsmc -o $@ $^
+
+# Generic rule to create .o65 out from .a65
+%.o65: %.a65
+	snescom -J -Wall -o $@ $<
+
+# Generic rule to create .ips out from .a65
+%.ips: %.a65
+	snescom -I -J -Wall -o $@ $<
+
+clean:
+	rm -f *.ips *.o65 *~ test.bin

snes/tests/header.a65

@@ -0,0 +1,121 @@
+; This file is part of the snescom-asm demo - a demo of how to build a SNES program.
+; See http://bisqwit.iki.fi/source/snescom.html for details.
+
+; Begin assembling to this address.
+*= $C0F000
+LINETEST:
+	sei
+	clc
+	xce
+-	lda $0000
+	lda $2100
+	sta $2100
+	bra -
+
+*= $C0F100
+IRQTEST:
+	sei
+	clc
+	xce
+	cli
+	sep #$20 : .as
+	rep #$10 : .xl
+	lda #$0f
+	sta $2100
+	lda #$ff
+	sta $4209
+	lda #$ff
+	sta $420a
+	lda #$ff
+	sta $4200
+	lda #$01
+-	sta @$002222
+	bra -
+
+*= $C0F200
+BANKTEST:
+	sei
+	clc
+	xce
+	sep #$20 : .as
+	lda #$01
+	sta @$0055aa
+-	bra -
+
+*= $C0FF00
+
+RESET:
+        sei
+        clc
+        xce
+        rep #$20 : .al
+        lda #$1fff
+        tcs
+	lda #$00
+	sta @$003333
+        jmp @GAME_MAIN
+
+NMI_16bit:
+        php
+         rep #$30 : .al : .xl
+         pha: phx: phy: phd: phb
+         jsl @NMI_ROUTINE
+         rep #$30 : .al : .xl
+int_exit:
+         plb: pld: ply: plx: pla
+        plp
+        rti
+
+IRQ_16bit:
+ABT_8bit: ABT_16bit:
+        php
+         rep #$30 : .al : .xl
+         pha: phx: phy: phd: phb
+         jsl @IRQ_ROUTINE
+	 rep #$30 : .al : .xl
+         bra int_exit
+
+;error vectors
+BRK_8bit: BRK_16bit:
+COP_8bit: COP_16bit:
+IRQ_8bit:
+NMI_8bit:
+        - wai: lda $ABCDEF : bra -
+
+*= $C0FFB0
+        ; Zero the area from $FFB0 - $FFFF
+        ; to ensure that the linker won't get clever
+        ; and fill it with small pieces of code.
+        .word 0,0,0,0, 0,0,0,0
+        .word 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0
+        .word 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0
+
+*= $C0FFB0
+
+.byt "MR"         ;2 bytes - company id
+.byt "TEST"       ;4 bytes - rom id
+
+*= $C0FFC0
+.byt "SD2SNES TESTS        "
+     ;123456789012345678901; - max 21 chars
+
+*= $C0FFD5     .byt $31  ;rom speed
+*= $C0FFD6     .byt $02  ;rom type
+*= $C0FFD7     .byt $06  ;rom size   64 kByte
+*= $C0FFD8     .byt $03  ;sram size  8 kBit
+*= $C0FFD9     .byt $09  ;rom region 4 = Finland
+*= $C0FFDA     .byt $33  ;company id flag
+
+*= $C0FFDC     .word 0,0 ;checksums
+
+*= $C0FFE4     .word COP_16bit
+*= $C0FFE6     .word BRK_16bit
+*= $C0FFE8     .word ABT_16bit
+*= $C0FFEA     .word NMI_16bit
+*= $C0FFEE     .word IRQ_16bit
+*= $C0FFF4     .word COP_8bit
+*= $C0FFF8     .word ABT_8bit
+*= $C0FFFA     .word NMI_8bit
+*= $C0FFFC     .word RESET
+*= $C0FFFE     .word BRK_8bit
+*= $C0FFFE     .word IRQ_8bit

snes/tests/reset.a65

@@ -0,0 +1,29 @@
+; This file is part of the snescom-asm demo - a demo of how to build a SNES program.
+; See http://bisqwit.iki.fi/source/snescom.html for details.
+
+; NMI - called on VBlank
+NMI_ROUTINE:
+        sep #$20 : .as
+	rep #$10 : .xl
+	lda #$00
+	pha
+	plb
+
+	lda $4210	; ack interrupt
+
+        rtl
+
+; IRQ - called when triggered
+IRQ_ROUTINE:
+        sep #$20 : .as
+        lda $4211  ;Acknowledge irq
+	lda #$00
+	sta @$002121
+	lda #$ff
+	sta @$002122
+	lda #$01
+	sta @$002122
+	lda #$5A
+	sta @$F00000
+	rtl
+

snes/tests/tests.a65

@@ -0,0 +1,564 @@
+GAME_MAIN:
+	sep #$20 : .as
+	stz $4200 ; inhibit VBlank NMI
+	lda #$01
+	sta $420d ; fast cpu
+	jsr killdma
+	jsr waitblank
+	lda #$00
+	sta @$f00000
+	sta @$f00001
+	sta @$f00002
+	sta @$f00003
+	lda #$00
+	sta @$f01fff
+	jsr snes_init
+	jsr video_init
+	jsr linetest
+	jsr batest
+	jsr snes_init
+	jsr video_init
+	jsr copy_memtest
+	jsr irqtest
+	jsl $7e1800
+-	bra -
+
+copy_memtest:
+	rep #$30 : .al : .xl
+	lda #$0300
+	ldx #!memtest
+	ldy #$1800
+	mvn $7e, ^memtest
+	rts
+
+linetest
+	sep #$20 : .as
+	lda #$00
+	pha
+	plb
+-	lda $0000
+        lda $2100
+        sta $21ff
+	lda @$f01fff
+	cmp #$01
+	bne -
+	rts
+
+irqtest:
+	cli
+	sep #$20 : .as
+	rep #$10 : .xl
+	lda #$0f
+	sta $2100
+	lda #$ff
+	sta $4209
+	lda #$ff
+	sta $420a
+	lda #$ff
+	sta $4200
+	sta @$f00000
+	lda #$01
+	sta @$002222
+	rts
+
+batest:
+	sei
+	sep #$20 : .as
+	rep #$10 : .xl
+	lda #$00
+	ldx #$2100
+-	sta !$0, x
+	inx
+	inc
+	bne -
+	lda #$e0
+	pha
+	plb
+	lda #$00
+	ldx #$0000
+-	cmp !$0, x
+	bne batest_fail
+	inx
+	inc
+	bne -
+	lda #$5a
+	sta @$f00002
+	lda #$00
+	pha
+	plb
+	rts
+batest_fail:
+	lda #$ff
+	sta @$f00002
+	lda #$00
+	pha
+	plb
+	rts
+
+memtest:
+; test 4 areas: 00-3f:8000-ffff
+;               40-7d:0000-ffff
+;               80-bf:8000-ffff
+;               80-ff:0000-ffff
+	sep #$20 : .as
+	rep #$10 : .xl
+
+	lda #$01
+	sta @$003333 ; switch to linear memory mode
+	ldx #$8000
+	stx $00
+	ldx #$8000
+	stx $10
+	lda #$00
+	sta $03 ; bank no.
+mem0_writeloop0:
+; switch bank
+	pha
+	plb
+	lda #$01
+	sta @$003333
+-       lda $03
+	clc
+	adc $01
+	clc
+	adc $00
+	sta !$0000, x
+	inx
+	stx $00
+	bne -
+	ldx $10
+	inc $03
+	lda #$00
+	sta @$003333
+	lda $03
+	sta @$f00003
+	cmp #$40
+	bne mem0_writeloop0
+
+	ldx #$0000
+	stx $10
+mem0_writeloop1:
+; switch bank
+        lda #$01
+        sta @$003333
+	lda $03
+	pha
+	plb
+-	lda $03
+	clc
+	adc $01
+	clc
+	adc $00
+	sta !$0000, x
+	inx
+	stx $00
+	bne -
+	ldx $10
+	inc $03
+	lda #$00
+	sta @$003333
+	lda $03
+	sta @$f00003
+	cmp #$7e
+	bne mem0_writeloop1
+
+	ldx #$8000
+	stx $10
+	lda #$80
+	sta $03 ; bank no.
+mem0_writeloop2:
+; switch bank
+        lda #$01
+        sta @$003333
+	lda $03
+	pha
+	plb
+-	lda $03
+	clc
+	adc $01
+	clc
+	adc $00
+	sta !$0000, x
+	inx
+	stx $00
+	bne -
+	ldx $10
+	inc $03
+	lda #$00
+	sta @$003333
+	lda $03
+	sta @$f00003
+	cmp #$c0
+	bne mem0_writeloop2
+	ldx #$0000
+	stx $10
+mem0_writeloop3:
+; switch bank
+        lda #$01
+        sta @$003333
+	lda $03
+	pha
+	plb
+-	lda $03
+	clc
+	adc $01
+	clc
+	adc $00
+	sta !$0000, x
+	inx
+	stx $00
+	bne -
+	ldx $10
+	inc $03
+	lda #$00
+	sta @$003333
+	lda $03
+	sta @$f00003
+	bne mem0_writeloop3
+
+	lda #$00
+	sta @$002121
+	lda #$ff
+	sta @$002122
+	lda #$03
+	sta @$002122
+
+	ldx #$8000
+	stx $00
+	ldx #$8000
+	stx $10
+	lda #$00
+	sta $03 ; bank no.
+mem0_verifyloop0:
+; switch bank
+        lda #$01
+        sta @$f00001
+        lda #$01
+        sta @$003333
+	lda $03
+	pha
+	plb
+-	lda $03
+	clc
+	adc $01
+	clc
+	adc $00
+	cmp !$0000, x
+	bne mem0_fail
+	inx
+	stx $00
+	bne -
+	ldx $10
+	inc $03
+	lda #$00
+	sta @$003333
+	lda $03
+	sta @$f00003
+	cmp #$40
+	bne mem0_verifyloop0
+
+	ldx #$0000
+	stx $10
+mem0_verifyloop1:
+; switch bank
+        lda #$01
+        sta @$003333
+	lda $03
+	pha
+	plb
+-	lda $03
+	clc
+	adc $01
+	clc
+	adc $00
+	cmp !$0000, x
+	bne mem0_fail
+	inx
+	stx $00
+	bne -
+	ldx $10
+	inc $03
+	lda #$00
+	sta @$003333
+	lda $03
+	sta @$f00003
+	cmp #$7e
+	bne mem0_verifyloop1
+
+	ldx #$8000
+	stx $10
+	lda #$80
+	sta $03 ; bank no.
+        bra mem0_verifyloop2
+mem0_fail:
+	lda #$00
+	pha
+	plb
+	sta @$003333
+	rep #$20 : .al
+	lda $00
+	sta @$f00004
+	sep #$20 : .as
+	lda $03
+	sta @$f00006
+	lda #$ff
+	sta @$f00001
+	rtl
+mem0_verifyloop2:
+; switch bank
+        lda #$01
+        sta @$003333
+	lda $03
+	pha
+	plb
+-	lda $03
+	clc
+	adc $01
+	clc
+	adc $00
+	cmp !$0000, x
+	bne mem0_fail
+	inx
+	stx $00
+	bne -
+	ldx $10
+	inc $03
+	lda #$00
+	sta @$003333
+	lda $03
+	sta @$f00003
+	cmp #$c0
+	bne mem0_verifyloop2
+
+	ldx #$0000
+	stx $10
+mem0_verifyloop3:
+; switch bank
+        lda #$01
+        sta @$003333
+	lda $03
+	pha
+	plb
+-	lda $03
+	clc
+	adc $01
+	clc
+	adc $00
+	cmp !$0000, x
+	bne mem0_fail
+	inx
+	stx $00
+	bne -
+	ldx $10
+	inc $03
+	lda #$00
+	sta @$003333
+	lda $03
+	sta @$f00003
+	bne mem0_verifyloop3
+
+	lda #$00
+	sta @$002121
+	lda #$e0
+	sta @$002122
+	lda #$03
+	sta @$002122
+
+	lda #$00
+	pha
+	plb
+	sta @$003333
+	lda #$5a
+	sta @$f00001
+	rtl
+	rtl
+	rtl
+	rtl
+	rtl
+	rtl
+
+killdma:
+	stz $420b
+	stz $420c
+	stz $4310
+	stz $4311
+	stz $4312
+	stz $4313
+	stz $4314
+	stz $4320
+	stz $4321
+	stz $4322
+	stz $4323
+	stz $4324
+	stz $4330
+	stz $4331
+	stz $4332
+	stz $4333
+	stz $4334
+	stz $4340
+	stz $4341
+	stz $4342
+	stz $4343
+	stz $4344
+	stz $4350
+	stz $4351
+	stz $4352
+	stz $4353
+	stz $4354
+	stz $4360
+	stz $4361
+	stz $4362
+	stz $4363
+	stz $4364
+	rts
+
+
+
+
+waitblank:
+-	lda $4212
+	and #$80
+	bne -
+-	lda $4212
+	and #$80
+	beq -
+	rts
+
+video_init:
+	sep #$20 : .as		;8-bit accumulator
+	rep #$10 : .xl		;16-bit index
+	lda #$03		;mode 3, mode 5 via HDMA :D
+	sta $2105
+	lda #$58		;Tilemap addr 0xB000
+	ora #$02		;SC size 32x64
+	sta $2107		;for BG1
+	lda #$50		;Tilemap addr 0xA000
+	ora #$02		;SC size 32x64
+	sta $2108		;for BG2
+	lda #$40		;chr base addr:
+	sta $210b		;BG1=0x0000, BG2=0x8000
+	lda #$01		;cut off leftmost subscreen pixel garbage
+	sta $2126
+	lda #$fe
+	sta $2127
+	lda #$10
+	sta $2130
+	lda #$1f
+	sta $212e
+	sta $212f
+	stz $2121
+	lda #$0f
+	sta $2100		;screen on, full brightness
+	stz $2121
+	lda #$1f		;red background
+	sta $2122
+	stz $2122
+	rts
+
+snes_init:
+	sep #$20 : .as		;8-bit accumulator
+	rep #$10 : .xl		;16-bit index
+	stz $4200		;
+	lda #$ff
+	sta $4201		;
+	stz $4202		;
+	stz $4203		;
+	stz $4204		;
+	stz $4205		;
+	stz $4206		;
+	stz $4207		;
+	stz $4208		;
+	stz $4209		;
+	stz $420a		;
+	stz $420b		;
+	stz $420c		;
+	lda #$8f
+	sta $2100		;INIDISP: force blank
+	lda #$03		; 8x8+16x16; name=0; base=3
+	sta $2101		;
+	stz $2102		;
+	stz $2103		;
+;	stz $2104		; (OAM Data?!)
+;	stz $2104		; (OAM Data?!)
+	stz $2105		;
+	stz $2106		;
+	stz $2107		;
+	stz $2108		;
+	stz $2109		;
+	stz $210a		;
+	stz $210b		;
+	stz $210c		;
+	stz $210d		;
+	stz $210d		;
+	stz $210e		;
+	stz $210e		;
+	stz $210f		;
+	stz $210f		;
+	lda #$05
+	sta $2110		;
+	stz $2110		;
+	stz $2111		;
+	stz $2111		;
+	stz $2112		;
+	stz $2112		;
+	stz $2113		;
+	stz $2113		;
+	stz $2114		;
+	stz $2114		;
+	lda #$80		
+	sta $2115		;
+	stz $2116		;
+	stz $2117		;
+;	stz $2118		;(VRAM Data?!)
+;	stz $2119		;(VRAM Data?!)
+	stz $211a		;
+	stz $211b		;
+	lda #$01
+	sta $211b		;
+	stz $211c		;
+	stz $211c		;
+	stz $211d		;
+	stz $211d		;
+	stz $211e		;
+	sta $211e		;
+	stz $211f		;
+	stz $211f		;
+	stz $2120		;
+	stz $2120		;
+	stz $2121		;
+;	stz $2122		; (CG Data?!)
+;	stz $2122		; (CG Data?!)
+	stz $2123		;
+	stz $2124		;
+	stz $2125		;
+	stz $2126		;
+	stz $2127		;
+	stz $2128		;
+	stz $2129		;
+	stz $212a		;
+	stz $212b		;
+	stz $212c		;
+	stz $212d		;
+	stz $212e		;
+	stz $212f		;
+	lda #$30
+	sta $2130		;
+	stz $2131		;
+	lda #$e0
+	sta $2132		;
+	stz $2133		;
+;clear WRAM lower page
+;        ldx #$0200
+;        stx $2181
+;        lda #$00
+;        sta $2183
+;        DMA0(#$08, #$FF00, #^zero, #!zero, #$80)
+;        ldx #$0000
+;        stx $2181
+;	lda #$00
+;	sta $2183
+;        DMA0(#$08, #$1e0, #^zero, #!zero, #$80)
+
+	rts
+
+

snes/text.a65

@@ -1,5 +1,6 @@
 .text
 #include "memmap.i65"
+.byt "===HIPRINT==="
 hiprint:
 	sep #$20 : .as
 	lda print_count
@@ -53,7 +54,9 @@ print_loop
 	phx	; source addr
 print_loop_inner
 	lda !0,x
-	asl
+	bne +
+	jmp print_end2
++	asl
 	sta @$2180
 	lda @print_pal
 	asl
@@ -81,6 +84,7 @@ print_loop2
 	lda @print_count
 	dec
 	sta @print_count_tmp
+	beq print_end2
 	lda #$00
 	pha
 	plb
@@ -100,7 +104,9 @@ print_loop2
 	plb
 print_loop2_inner
 	lda !0,x
-	asl
+	bne +
+	jmp print_end
++	asl
 	sta @$2180
 	lda @print_pal
 	asl
@@ -124,6 +130,10 @@ print_loop2_inner
 	beq print_end
 	bmi print_end
 	bra print_loop2_inner
+print_end2 ; clean up the stack (6 bytes)
+	ply
+	ply
+	ply
 print_end
 	lda #$00
 	pha
@@ -157,7 +167,7 @@ loprint:
 	sta $2183
 	ldx !print_src
 	lda !print_bank
-	pha 
+	pha
 	plb
 loprint_loop_inner
 	lda !0,x
@@ -257,16 +267,39 @@ draw_window:
 	jsr hiprint
 
 ; print window title
+	lda print_x
+	pha
 	inc print_x
 	inc print_x
+	lda #^window_tl
+	sta print_bank
+	ldx #!window_tl
+	stx print_src
+	lda #$01
+	sta print_count
+	jsr hiprint
+	inc print_x
 	lda window_tbank
 	sta print_bank
 	ldx window_taddr
 	stx print_src
+	lda window_w
+	sta print_count
 	jsr hiprint
-	dec print_x
-	dec print_x
-
+	lda print_done
+	adc print_x
+	sta print_x
+	lda #^window_tr
+	sta print_bank
+	ldx #!window_tr
+	stx print_src
+	lda #$01
+	sta print_count
+	jsr hiprint
+	lda window_w
+	sta print_count
+	pla
+	sta print_x
 ; draw left+right borders + space inside window
 	lda #^stringbuf
 	sta print_bank

snes/time.a65

@@ -2,7 +2,7 @@
 #include "dma.i65"
 
 timebox_data
-        ; string offset, selection width, bcdtime offset, 1s limit, 10s limit
+        ; string offset, selection width, bcdtime offset
 	.byt  0, 4, 9
 	.byt  5, 2, 8
 	.byt  8, 2, 6
@@ -46,6 +46,7 @@ time_init:
 	jsr gettime
 	stz time_sel
 	stz time_exit
+	stz time_cancel
 	lda #^text_buttonB
 	sta print_bank
 	ldx #!text_buttonB
@@ -120,17 +121,29 @@ timeloop1
 	lda #$80
 	and pad1trig+1
 	bne tkey_b
+	lda #$80
+	and pad1trig
+	bne tkey_a
 	; do stuff
 	lda time_exit
-	beq timeloop1
+	bne timesave
 	; set clock
+	lda time_cancel
+	bne timenosave
+	beq timeloop1
+timesave
 	jsr settime
+timenosave
 	; restore text area
 	jsr restore_screen
 	plp
 	rtl
 
 tkey_b
+	inc time_cancel
+	jmp time_update
+
+tkey_a
 	inc time_exit
 	jmp time_update
 

snes/utils/mkmap.sh

@@ -0,0 +1,24 @@
+#!/bin/bash
+
+args=("$@")
+objcount=0
+
+grep object_ link.log | \
+sed -e 's/object_//g; s/_code//g; s/_data//g' | \
+while read obj; do
+  objcount=$((objcount+1))
+  read base idx <<< "$obj"
+  base="0x${base}"
+  fn=${args[$idx-1]}
+  echo ======$fn, base=$base====== > ${fn%%.*}.map
+  sed -e '/^Externs/,$d;/^Labels/d' < $fn.log | \
+  while read line; do
+    read addr label <<< "$line"
+    addr="0x$addr"
+    decaddr=`printf "%d" $addr`
+    [ "$decaddr" -gt "65535" ] && base=0
+    ea=`printf "%X" $((base+addr))`
+    echo $ea $label >> ${fn%%.*}.map
+  done
+done
+

src/Makefile

@@ -55,7 +55,7 @@ TARGET = $(OBJDIR)/sd2snes
 
 
 # List C source files here. (C dependencies are automatically generated.)
-SRC = main.c ff.c ccsbcs.c clock.c uart.c power.c led.c timer.c printf.c spi.c fileops.c rtc.c fpga.c fpga_spi.c snes.c smc.c memory.c filetypes.c faulthandler.c sort.c crc32.c cic.c cli.c xmodem.c irq.c rle.c sdnative.c msu1.c crc16.c
+SRC = main.c ff.c ccsbcs.c clock.c uart.c power.c led.c timer.c printf.c spi.c fileops.c rtc.c fpga.c fpga_spi.c snes.c smc.c memory.c filetypes.c faulthandler.c sort.c crc32.c cic.c cli.c xmodem.c irq.c rle.c sdnative.c msu1.c crc16.c sysinfo.c
 
 # usbcontrol.c usb_hid.c usbhw_lpc.c usbinit.c usbstdreq.c
 

src/bootldr/Makefile

@@ -213,6 +213,8 @@ sym: $(TARGET).sym
 
 
 #	utils/lpcchksum $(TARGET).bin
+fresh: erase program
+
 program: bin
 	openocd -f openocd-usb.cfg -f lpc1754.cfg -f flash.cfg
 

src/bootldr/clock.c

@@ -14,8 +14,8 @@ void clock_disconnect() {
 
 void clock_init() {
 
-/* set flash access time to 5 clks (80<f<=100MHz) */
-  setFlashAccessTime(5);
+/* set flash access time to 6 clks (safe setting) */
+  setFlashAccessTime(6);
 
 /* setup PLL0 for ~44100*256*8 Hz
    Base clock: 12MHz
@@ -48,8 +48,7 @@ void clock_init() {
  */
   enableMainOsc();
   setClkSrc(CLKSRC_MAINOSC);
-// XXX  setPLL0MultPrediv(429, 19);
-  setPLL0MultPrediv(23, 2);
+  setPLL0MultPrediv(12, 1);
   enablePLL0();
   setCCLKDiv(3);
   connectPLL0();

src/bootldr/config.h

@@ -1,7 +1,7 @@
 #ifndef _CONFIG_H
 #define _CONFIG_H
 
-#define DEBUG_BL
+//#define DEBUG_BL
 // #define DEBUG_SD
 // #define DEBUG_IRQ
 
@@ -19,7 +19,7 @@
 #define DBG_BL while(0)
 #endif
 
-#define FW_START                  (0x00003000L)
+#define FW_START                  (0x00002000L)
 #define FLASH_SECTORS             (17)
 
 
@@ -51,7 +51,7 @@
 
 #define CONFIG_UART_NUM	          3
 // #define CONFIG_CPU_FREQUENCY      90315789
-#define CONFIG_CPU_FREQUENCY      (92000000L)
+#define CONFIG_CPU_FREQUENCY      (96000000L)
 //#define CONFIG_CPU_FREQUENCY      46000000
 #define CONFIG_UART_PCLKDIV       1
 #define CONFIG_UART_TX_BUF_SHIFT  8

src/bootldr/ffconf.h

@@ -14,7 +14,7 @@
 / Function and Buffer Configurations
 /----------------------------------------------------------------------------*/
 
-#define	_FS_TINY	0		/* 0:Normal or 1:Tiny */
+#define	_FS_TINY	1		/* 0:Normal or 1:Tiny */
 /* When _FS_TINY is set to 1, FatFs uses the sector buffer in the file system
 /  object instead of the sector buffer in the individual file object for file
 /  data transfer. This reduces memory consumption 512 bytes each file object. */
@@ -57,7 +57,7 @@
 / Locale and Namespace Configurations
 /----------------------------------------------------------------------------*/
 
-#define _CODE_PAGE	1252
+#define _CODE_PAGE	1
 /* The _CODE_PAGE specifies the OEM code page to be used on the target system.
 /  Incorrect setting of the code page can cause a file open failure.
 /

src/bootldr/iap.c

@@ -72,10 +72,12 @@ FLASH_RES check_flash() {
 }
 
 IAP_RES iap_wrap(uint32_t *iap_cmd, uint32_t *iap_res) {
-  NVIC_DisableIRQ(RIT_IRQn);
-  NVIC_DisableIRQ(UART_IRQ);
+//  NVIC_DisableIRQ(RIT_IRQn);
+//  NVIC_DisableIRQ(UART_IRQ);
+  for(volatile int i=0; i<2048; i++);
   iap_entry(iap_cmd, iap_res);
-  NVIC_EnableIRQ(UART_IRQ);
+  for(volatile int i=0; i<2048; i++);
+//  NVIC_EnableIRQ(UART_IRQ);
   return iap_res[0];
 }
 
@@ -153,12 +155,16 @@ FLASH_RES flash_file(uint8_t *filename) {
 
     writeled(1);
     DBG_BL printf("erasing flash...\n");
+    DBG_UART uart_putc('P');
     if((res = iap_prepare_for_write(FW_START / 0x1000, FLASH_SECTORS)) != CMD_SUCCESS) {
       DBG_BL printf("error %ld while preparing for erase\n", res);
+      DBG_UART uart_putc('X');
       return ERR_FLASHPREP;
     };
+    DBG_UART uart_putc('E');
     if((res = iap_erase(FW_START / 0x1000, FLASH_SECTORS)) != CMD_SUCCESS) {
       DBG_BL printf("error %ld while erasing\n", res);
+      DBG_UART uart_putc('X');
       return ERR_FLASHERASE;
     }
     DBG_BL printf("writing... @%08lx\n", flash_addr);
@@ -174,18 +180,23 @@ FLASH_RES flash_file(uint8_t *filename) {
       DBG_BL printf("current_sec=%d flash_addr=%08lx\n", current_sec, flash_addr);
       DBG_UART uart_putc('.');
       if(current_sec < (FW_START / 0x1000)) return ERR_FLASH;
+      DBG_UART uart_putc(current_sec["0123456789ABCDEFGH"]);
+      DBG_UART uart_putc('p');
       if((res = iap_prepare_for_write(current_sec, current_sec)) != CMD_SUCCESS) {
         DBG_BL printf("error %ld while preparing sector %d for write\n", res, current_sec);
+        DBG_UART uart_putc('X');
         return ERR_FLASH;
       }
+      DBG_UART uart_putc('w');
       if((res = iap_ram2flash(flash_addr, file_buf, 512)) != CMD_SUCCESS) {
         DBG_BL printf("error %ld while writing to address %08lx (sector %d)\n", res, flash_addr, current_sec);
+        DBG_UART uart_putc('X');
         return ERR_FLASH;
       }
     }
-    if(total_read != file_header.size) {
+    if(total_read != (file_header.size + 0x100)) {
       DBG_BL printf("wrote less data than expected! (%08lx vs. %08lx)\n", total_read, file_header.size);
-      DBG_UART uart_putc('X');
+//      DBG_UART uart_putc('X');
       return ERR_FILECHK;
     }
     writeled(0);

src/bootldr/lpc1754boot.ld

@@ -10,7 +10,7 @@ ENTRY(_start)
 
 MEMORY
 {
-  flash  (rx)  : ORIGIN = 0x00000000, LENGTH = 0x03000
+  flash  (rx)  : ORIGIN = 0x00000000, LENGTH = 0x02000
   ram    (rwx) : ORIGIN = 0x10000000, LENGTH = 0x03fe0 /* leave room for IAP */
   ahbram (rwx) : ORIGIN = 0x2007C000, LENGTH = 0x04000
 }

src/bootldr/main.c

@@ -29,7 +29,7 @@ int main(void) {
   SNES_CIC_PAIR_REG->FIODIR = BV(SNES_CIC_PAIR_BIT);
   BITBAND(SNES_CIC_PAIR_REG->FIOSET, SNES_CIC_PAIR_BIT) = 1;
 /*  LPC_GPIO2->FIODIR = BV(0) | BV(1) | BV(2); */
-  LPC_GPIO0->FIODIR = BV(16);
+//  LPC_GPIO0->FIODIR = BV(16);
 
  /* connect UART3 on P0[25:26] + SSP0 on P0[15:18] + MAT3.0 on P0[10] */
   LPC_PINCON->PINSEL1 = BV(18) | BV(19) | BV(20) | BV(21) /* UART3 */
@@ -50,7 +50,7 @@ int main(void) {
   writeled(0);
  /* do this last because the peripheral init()s change PCLK dividers */
   clock_init();
-  LPC_PINCON->PINSEL0 |= BV(20) | BV(21);                  /* MAT3.0 (FPGA clock) */
+//  LPC_PINCON->PINSEL0 |= BV(20) | BV(21);                  /* MAT3.0 (FPGA clock) */
   sdn_init();
   DBG_BL printf("chksum=%08lx\n", *(uint32_t*)28);
   DBG_BL printf("\n\nsd2snes mk.2 bootloader\nver.: " VER "\ncpu clock: %ld Hz\n", CONFIG_CPU_FREQUENCY);
@@ -61,7 +61,8 @@ DBG_BL printf("PCONP=%lx\n", LPC_SC->PCONP);
   LPC_TIM3->MCR=MR0R;
   LPC_TIM3->MR0=1;
   LPC_TIM3->TCR=1;
-
+  NVIC->ICER[0] = 0xffffffff;
+  NVIC->ICER[1] = 0xffffffff;
   FLASH_RES res = flash_file((uint8_t*)"/sd2snes/firmware.img");
   if(res == ERR_FLASHPREP || res == ERR_FLASHERASE || res == ERR_FLASH) {
     rdyled(0);

src/bootldr/timer.c

@@ -18,32 +18,6 @@ extern volatile int sd_changed;
 volatile tick_t ticks;
 volatile int wokefromrit;
 
-void __attribute__((weak,noinline)) SysTick_Hook(void) {
-  /* Empty function for hooking the systick handler */
-}
-
-/* Systick interrupt handler */
-void SysTick_Handler(void) {
-  ticks++;
-  static uint16_t sdch_state = 0;
-  sdch_state = (sdch_state << 1) | SDCARD_DETECT | 0xe000;
-  if((sdch_state == 0xf000) || (sdch_state == 0xefff)) {
-    sd_changed = 1;
-  }
-  sdn_changed();
-  SysTick_Hook();
-}
-
-void __attribute__((weak,noinline)) RIT_Hook(void) {
-}
-
-void RIT_IRQHandler(void) {
-  LPC_RIT->RICTRL = BV(RITINT);
-  NVIC_ClearPendingIRQ(RIT_IRQn);
-  wokefromrit = 1;
-  RIT_Hook();
-}
-
 void timer_init(void) {
   /* turn on power to RIT */
   BITBAND(LPC_SC->PCONP, PCRIT) = 1;
@@ -54,8 +28,6 @@ void timer_init(void) {
   /* PCLK = CCLK */
   BITBAND(LPC_SC->PCLKSEL1, 26) = 1;
   BITBAND(LPC_SC->PCLKSEL1, PCLK_TIMER3) = 1;
-  /* enable SysTick */
-  SysTick_Config((SysTick->CALIB & SysTick_CALIB_TENMS_Msk));
 }
 
 void delay_us(unsigned int time) {
@@ -84,21 +56,3 @@ void delay_ms(unsigned int time) {
   LPC_RIT->RICTRL = 0;
 }
 
-void sleep_ms(unsigned int time) {
-
-  wokefromrit = 0;
-  /* Prepare RIT */
-  LPC_RIT->RICOUNTER = 0;
-  LPC_RIT->RICOMPVAL = (CONFIG_CPU_FREQUENCY / 1000) * time;
-  LPC_RIT->RICTRL    = BV(RITEN) | BV(RITINT);
-  NVIC_EnableIRQ(RIT_IRQn);
-
-  /* Wait until RIT signals an interrupt */
-//uart_putc(';');
-  while(!wokefromrit) {
-    __WFI();
-  }
-  NVIC_DisableIRQ(RIT_IRQn);
-  /* Disable RIT */
-  LPC_RIT->RICTRL = BV(RITINT);
-}

src/bootldr/uart.c

@@ -10,7 +10,7 @@
 #include "uart.h"
 #include "led.h"
 
-static uint8_t uart_lookupratio(float f_fr) {
+/*static uint8_t uart_lookupratio(float f_fr) {
   uint16_t errors[72]={0,67,71,77,83,91,100,111,125,
                        133,143,154,167,182,200,214,222,231,
                        250,267,273,286,300,308,333,357,364,
@@ -45,8 +45,8 @@ static uint8_t uart_lookupratio(float f_fr) {
   }
   return ratios[i_result];
 }
-
-static uint32_t baud2divisor(unsigned int baudrate) {
+*/
+/*static uint32_t baud2divisor(unsigned int baudrate) {
   uint32_t int_ratio;
   uint32_t error;
   uint32_t dl=0;
@@ -73,66 +73,15 @@ static uint32_t baud2divisor(unsigned int baudrate) {
     return ((fract_ratio<<16)&0xff0000) | dl;
   }
 }
-
-static char txbuf[1 << CONFIG_UART_TX_BUF_SHIFT];
+*/
+//static char txbuf[1 << CONFIG_UART_TX_BUF_SHIFT];
 static volatile unsigned int read_idx,write_idx;
 
-void UART_HANDLER(void) {
-  int iir = UART_REGS->IIR;
-  if (!(iir & 1)) {
-    /* Interrupt is pending */
-    switch (iir & 14) {
-#if CONFIG_UART_NUM == 1
-    case 0: /* modem status */
-      (void) UART_REGS->MSR; // dummy read to clear
-      break;
-#endif
-
-    case 2: /* THR empty - send */
-      if (read_idx != write_idx) {
-        int maxchars = 16;
-        while (read_idx != write_idx && --maxchars > 0) {
-          UART_REGS->THR = (unsigned char)txbuf[read_idx];
-          read_idx = (read_idx+1) & (sizeof(txbuf)-1);
-        }
-        if (read_idx == write_idx) {
-          /* buffer empty - turn off THRE interrupt */
-          BITBAND(UART_REGS->IER, 1) = 0;
-        }
-      }
-      break;
-      
-    case 12: /* RX timeout */
-    case  4: /* data received - not implemented yet */
-      (void) UART_REGS->RBR; // dummy read to clear
-      break;
-
-    case 6: /* RX error */
-      (void) UART_REGS->LSR; // dummy read to clear
-
-    default: break;
-    }
-  }
-}
-
 void uart_putc(char c) {
   if (c == '\n')
     uart_putc('\r');
-
-  unsigned int tmp = (write_idx+1) & (sizeof(txbuf)-1) ;
-
-  if (read_idx == write_idx && (BITBAND(UART_REGS->LSR, 5))) {
-    /* buffer empty, THR empty -> send immediately */
-    UART_REGS->THR = (unsigned char)c;
-  } else {
-#ifdef CONFIG_UART_DEADLOCKABLE
-    while (tmp == read_idx) ;
-#endif
-    BITBAND(UART_REGS->IER, 1) = 0; // turn off UART interrupt
-    txbuf[write_idx] = c;
-    write_idx = tmp;
-    BITBAND(UART_REGS->IER, 1) = 1;
-  }
+  while(!(UART_REGS->LSR & (0x20)));
+  UART_REGS->THR = c;
 }
 
 /* Polling version only */
@@ -170,7 +119,7 @@ void uart_init(void) {
 
   /* set baud rate - no fractional stuff for now */
   UART_REGS->LCR = BV(7) | 3; // always 8n1
-  div = baud2divisor(CONFIG_UART_BAUDRATE);
+  div = 0x850004; // baud2divisor(CONFIG_UART_BAUDRATE);
 
   UART_REGS->DLL = div & 0xff;
   UART_REGS->DLM = (div >> 8) & 0xff;
@@ -183,10 +132,6 @@ void uart_init(void) {
   /* reset and enable FIFO */
   UART_REGS->FCR = BV(0);
 
-  /* enable transmit interrupt */
-  BITBAND(UART_REGS->IER, 1) = 1;
-  NVIC_EnableIRQ(UART_IRQ);
-
   UART_REGS->THR = '?';
 }
 

src/cic.c

@@ -5,11 +5,16 @@
 #include "cic.h"
 
 char *cicstatenames[4] = { "CIC_OK", "CIC_FAIL", "CIC_PAIR", "CIC_SCIC" };
+char *cicstatefriendly[4] = {"Original or no CIC", "Original CIC(failed)", "SuperCIC enhanced", "SuperCIC detected, not used"};
 
 void print_cic_state() {
   printf("CIC state: %s\n", get_cic_statename(get_cic_state()));
 }
 
+inline char *get_cic_statefriendlyname(enum cicstates state) {
+  return cicstatefriendly[state];
+}
+
 inline char *get_cic_statename(enum cicstates state) {
   return cicstatenames[state];
 }

src/cic.h

@@ -13,6 +13,7 @@ enum cic_region { CIC_NTSC = 0, CIC_PAL };
 
 void print_cic_state(void);
 char *get_cic_statename(enum cicstates state);
+char *get_cic_statefriendlyname(enum cicstates state);
 enum cicstates get_cic_state(void);
 void cic_init(int allow_pairmode);
 

src/cli.c

@@ -58,8 +58,8 @@ static char *curchar;
 
 /* Word lists */
 static char command_words[] =
-  "cd\0reset\0sreset\0dir\0ls\0test\0resume\0loadrom\0loadraw\0saveraw\0put\0d4\0vmode\0mapper\0settime\0time\0setfeature\0hexdump\0w8\0w16\0";
-enum { CMD_CD = 0, CMD_RESET, CMD_SRESET, CMD_DIR, CMD_LS, CMD_TEST, CMD_RESUME, CMD_LOADROM, CMD_LOADRAW, CMD_SAVERAW, CMD_PUT, CMD_D4, CMD_VMODE, CMD_MAPPER, CMD_SETTIME, CMD_TIME, CMD_SETFEATURE, CMD_HEXDUMP, CMD_W8, CMD_W16 };
+  "cd\0reset\0sreset\0dir\0ls\0test\0resume\0loadrom\0loadraw\0saveraw\0put\0rm\0d4\0vmode\0mapper\0settime\0time\0setfeature\0hexdump\0w8\0w16\0";
+enum { CMD_CD = 0, CMD_RESET, CMD_SRESET, CMD_DIR, CMD_LS, CMD_TEST, CMD_RESUME, CMD_LOADROM, CMD_LOADRAW, CMD_SAVERAW, CMD_PUT, CMD_RM, CMD_D4, CMD_VMODE, CMD_MAPPER, CMD_SETTIME, CMD_TIME, CMD_SETFEATURE, CMD_HEXDUMP, CMD_W8, CMD_W16 };
 
 /* ------------------------------------------------------------------------- */
 /*   Parse functions                                                         */
@@ -134,7 +134,7 @@ static int8_t parse_wordlist(char *wordlist) {
     do {
       // If current word list character is \0: No match found
       if (c == 0) {
-        printf("Unknown word: %s\n",curchar);
+        printf("Unknown word: %s\n(use ? for help)",curchar);
         return -1;
       }
 
@@ -343,6 +343,11 @@ void cmd_put(void) {
   }
 }
 
+void cmd_rm(void) {
+  FRESULT res = f_unlink(curchar);
+  if(res) printf("Error %d removing %s\n", res, curchar);
+}
+
 void cmd_mapper(void) {
   int32_t mapper;
   mapper = parse_unsigned(0,7,10);
@@ -509,6 +514,10 @@ void cli_loop(void) {
       cmd_saveraw();
       break;
 
+    case CMD_RM:
+      cmd_rm();
+      break;
+
     case CMD_D4:
       cmd_d4();
       break;

src/config

@@ -1,3 +1,4 @@
-CONFIG_VERSION=0.0.1
-CONFIG_FWVER=16777214
+CONFIG_VERSION="0.1.2"
+#FWVER=00010200
+CONFIG_FWVER=66048
 CONFIG_MCU_FOSC=12000000

src/config.h

@@ -1,12 +1,13 @@
 #ifndef _CONFIG_H
 #define _CONFIG_H
 
+#include "autoconf.h"
+
 // #define DEBUG_FS
 // #define DEBUG_SD
 // #define DEBUG_IRQ
 // #define DEBUG_MSU1
 
-#define VER                       "0.0.1(NSFW)"
 #define IN_AHBRAM                 __attribute__ ((section(".ahbram")))
 
 #define SD_DT_INT_SETUP()         do {\
@@ -65,8 +66,8 @@
 #define FPGA_MCU_RDY_REG          LPC_GPIO2
 #define FPGA_MCU_RDY_BIT          9
 
-#define QSORT_MAXELEM             1024
-
+#define QSORT_MAXELEM             2048
+#define CLTBL_SIZE		  100
 #define SSP_REGS LPC_SSP0
 #define SSP_PCLKREG PCLKSEL1
 // 1: PCLKSEL0

src/ff.c

@@ -2198,7 +2198,6 @@ FRESULT f_read (
 #if !_FS_TINY
 #if !_FS_READONLY
 			if (fp->flag & FA__DIRTY) {				/* Write sector I/O buffer if needed */
-printf("DIRTY!?!\n");
 				if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK)
 					ABORT(fp->fs, FR_DISK_ERR);
 				fp->flag &= ~FA__DIRTY;
@@ -2222,7 +2221,6 @@ printf("DIRTY!?!\n");
 			mem_cpy(rbuff, &fp->fs->win[fp->fptr % SS(fp->fs)], rcnt);	/* Pick partial sector */
 #else
 			mem_cpy(rbuff, &fp->buf[fp->fptr % SS(fp->fs)], rcnt);	/* Pick partial sector */
-			printf("final mem_cpy, rcnt=%d, rbuff-buff=%d\n", rcnt, (void*)rbuff-buff);
 		} else {
 			sd_offload_partial_start = fp->fptr % SS(fp->fs);
 			sd_offload_partial_end = sd_offload_partial_start + rcnt;
@@ -2376,7 +2374,6 @@ FRESULT f_sync (
 	res = validate(fp->fs, fp->id);		/* Check validity of the object */
 	if (res == FR_OK) {
 		if (fp->flag & FA__WRITTEN) {	/* Has the file been written? */
-printf("DIRTY?!?!?!\n");
 #if !_FS_TINY	/* Write-back dirty buffer */
 			if (fp->flag & FA__DIRTY) {
 				if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK)
@@ -2642,8 +2639,16 @@ FRESULT f_lseek (
 						fp->flag &= ~FA__DIRTY;
 					}
 #endif
-					if (disk_read(fp->fs->drv, fp->buf, dsc, 1) != RES_OK)
-						ABORT(fp->fs, FR_DISK_ERR);
+					if(!ff_sd_offload) {
+						sd_offload_partial=0;
+						if (disk_read(fp->fs->drv, fp->buf, dsc, 1) != RES_OK)
+							ABORT(fp->fs, FR_DISK_ERR);
+					} else {
+						sd_offload_partial=1;
+						sd_offload_partial_start = fp->fptr % SS(fp->fs);
+					}
+//					if (disk_read(fp->fs->drv, fp->buf, dsc, 1) != RES_OK)
+//						ABORT(fp->fs, FR_DISK_ERR);
 #endif
 					fp->dsect = dsc;
 				}
@@ -2822,6 +2827,46 @@ FRESULT f_readdir (
 }
 
 
+FRESULT l_opendirbycluster (
+  FATFS *fs,
+  DIR *dj,
+  const TCHAR *path,
+  DWORD clust
+)
+{
+  FRESULT res;
+  res = chk_mounted(&path, &fs, 0);
+  DEF_NAMEBUF;
+  INIT_BUF(*dj);
+  dj->sclust = clust;
+  dj->fs = fs;
+  dj->id = fs->id;
+  dj->dir = 0;
+  res = dir_sdi(dj, 0);
+  FREE_BUF();
+  return res;
+}
+
+FRESULT l_openfilebycluster (
+  FATFS *fs,           /* Pointer to file system object */
+  FIL *fp,             /* Pointer to the blank file object */
+  const TCHAR *path,
+  DWORD clust,         /* Cluster number to be opened */
+  DWORD fsize          /* File size to be assumed */
+)
+{
+  chk_mounted(&path, &fs, 0);
+  fp->flag = FA_READ;
+  fp->org_clust = clust;
+  fp->fsize = fsize;
+  fp->fptr = 0;
+  fp->dsect = 0;
+  fp->fs = fs;
+
+  return FR_OK;
+}
+
+
 
 #if _FS_MINIMIZE == 0
 /*-----------------------------------------------------------------------*/
@@ -2854,27 +2899,6 @@ FRESULT f_stat (
 	LEAVE_FF(dj.fs, res);
 }
 
-
-FRESULT l_openfilebycluster (
-  FATFS *fs,           /* Pointer to file system object */
-  FIL *fp,             /* Pointer to the blank file object */
-  const TCHAR *path,
-  DWORD clust,         /* Cluster number to be opened */
-  DWORD fsize          /* File size to be assumed */
-)
-{
-  chk_mounted(&path, &fs, 0);
-  fp->flag = FA_READ;
-  fp->org_clust = clust;
-  fp->fsize = fsize;
-  fp->fptr = 0;
-  fp->dsect = 0;
-  fp->fs = fs;
-
-  return FR_OK;
-}
-
-
 #if !_FS_READONLY
 /*-----------------------------------------------------------------------*/
 /* Get Number of Free Clusters                                           */

src/ff.h

@@ -398,6 +398,7 @@ typedef enum {
 
 /* Low Level functions */
 FRESULT l_openfilebycluster(FATFS *fs, FIL *fp, const TCHAR *path, DWORD clust, DWORD fsize);   /* Open a file by its start cluster using supplied file size */
+FRESULT l_opendirbycluster (FATFS *fs, DIR *dj, const TCHAR *path, DWORD clust);
 
 /* application level functions */
 FRESULT f_mount (BYTE, FATFS*);						/* Mount/Unmount a logical drive */

src/ffconf.h

@@ -48,7 +48,7 @@
 /* To enable f_forward function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */
 
 
-#define	_USE_FASTSEEK	0	/* 0:Disable or 1:Enable */
+#define	_USE_FASTSEEK	1	/* 0:Disable or 1:Enable */
 /* To enable fast seek feature, set _USE_FASTSEEK to 1. */
 
 

src/fileops.c

@@ -47,6 +47,10 @@ void file_reinit(void) {
   file_init();
 }
 
+FRESULT dir_open_by_filinfo(DIR* dir, FILINFO* fno) {
+  return l_opendirbycluster(&fatfs, dir, (TCHAR*)"", fno->clust);
+}
+
 void file_open_by_filinfo(FILINFO* fno) {
   file_res = l_openfilebycluster(&fatfs, &file_handle, (TCHAR*)"", fno->clust, fno->fsize);
 }

src/fileops.h

@@ -41,6 +41,7 @@ enum filestates file_status;
 
 void file_init(void);
 void file_open(uint8_t* filename, BYTE flags);
+FRESULT dir_open_by_filinfo(DIR* dir, FILINFO* fno_param);
 void file_open_by_filinfo(FILINFO* fno);
 void file_close(void);
 void file_seek(uint32_t offset);

src/filetypes.c

@@ -53,7 +53,7 @@ uint16_t scan_flat(const char* path) {
   return numentries;
 }
 
-uint32_t scan_dir(char* path, char mkdb, uint32_t this_dir_tgt) {
+uint32_t scan_dir(char* path, FILINFO* fno_param, char mkdb, uint32_t this_dir_tgt) {
   DIR dir;
   FILINFO fno;
   FRESULT res;
@@ -66,6 +66,8 @@ uint32_t scan_dir(char* path, char mkdb, uint32_t this_dir_tgt) {
   static uint32_t parent_tgt;
   static uint32_t dir_end = 0;
   static uint8_t was_empty = 0;
+  static uint16_t num_files_total = 0;
+  static uint16_t num_dirs_total = 0;
   uint32_t dir_tgt;
   uint16_t numentries;
   uint32_t dirsize;
@@ -91,19 +93,24 @@ uint32_t scan_dir(char* path, char mkdb, uint32_t this_dir_tgt) {
   numentries=0;
   for(pass = 0; pass < 2; pass++) {
     if(pass) {
+      num_dirs_total++;
       dirsize = 4*(numentries);
       next_subdir_tgt += dirsize + 4;
       if(parent_tgt) next_subdir_tgt += 4;
       if(next_subdir_tgt > dir_end) {
         dir_end = next_subdir_tgt;
       }
-      printf("path=%s depth=%d ptr=%lx entries=%d parent=%lx next subdir @%lx\n", path, depth, db_tgt, numentries, parent_tgt, next_subdir_tgt);
+//      printf("path=%s depth=%d ptr=%lx entries=%d parent=%lx next subdir @%lx\n", path, depth, db_tgt, numentries, parent_tgt, next_subdir_tgt);
       if(mkdb) {
-        printf("d=%d Saving %lx to Address %lx  [end]\n", depth, 0L, next_subdir_tgt - 4);
+//        printf("d=%d Saving %lx to Address %lx  [end]\n", depth, 0L, next_subdir_tgt - 4);
         sram_writelong(0L, next_subdir_tgt - 4);
       }
     }
-    res = f_opendir(&dir, (TCHAR*)path);
+    if(fno_param) {
+      res = dir_open_by_filinfo(&dir, fno_param);
+    } else {
+      res = f_opendir(&dir, path);
+    }
     if (res == FR_OK) {
       if(pass && parent_tgt && mkdb) {
         /* write backlink to parent dir
@@ -114,6 +121,7 @@ uint32_t scan_dir(char* path, char mkdb, uint32_t this_dir_tgt) {
           db_tgt += 0x00010000;
           printf("new=%lx\n", db_tgt);
         }
+//        printf("writing link to parent, %lx to address %lx [../]\n", parent_tgt-SRAM_MENU_ADDR, db_tgt);
         sram_writelong((parent_tgt-SRAM_MENU_ADDR), db_tgt);
         sram_writebyte(0, db_tgt+sizeof(next_subdir_tgt));
         sram_writeblock("../\0", db_tgt+sizeof(next_subdir_tgt)+sizeof(len), 4);
@@ -142,9 +150,7 @@ uint32_t scan_dir(char* path, char mkdb, uint32_t this_dir_tgt) {
               strncpy(path+len+1, (char*)fn, sizeof(fs_path)-len);
               if(mkdb) {
                 uint16_t pathlen = strlen(path);
-                /* write element pointer to current dir structure */
-                printf("d=%d Saving %lx to Address %lx  [dir]\n", depth, db_tgt, dir_tgt);
-                sram_writelong((db_tgt-SRAM_MENU_ADDR)|((uint32_t)0x80<<24), dir_tgt);
+//                printf("d=%d Saving %lx to Address %lx  [dir]\n", depth, db_tgt, dir_tgt);
                 /* save element:
                    - path name
                    - pointer to sub dir structure */
@@ -154,7 +160,12 @@ uint32_t scan_dir(char* path, char mkdb, uint32_t this_dir_tgt) {
                   db_tgt += 0x00010000;
                   printf("new=%lx\n", db_tgt);
                 }
-                printf("    Saving dir descriptor to %lx tgt=%lx, path=%s\n", db_tgt, next_subdir_tgt, path);
+//                printf("    Saving dir descriptor to %lx tgt=%lx, path=%s\n", db_tgt, next_subdir_tgt, path);
+                /* write element pointer to current dir structure */
+                sram_writelong((db_tgt-SRAM_MENU_ADDR)|((uint32_t)0x80<<24), dir_tgt);
+                /* save element:
+                   - path name
+                   - pointer to sub dir structure */
                 sram_writelong((next_subdir_tgt-SRAM_MENU_ADDR), db_tgt);
                 sram_writebyte(len+1, db_tgt+sizeof(next_subdir_tgt));
                 sram_writeblock(path, db_tgt+sizeof(next_subdir_tgt)+sizeof(len), pathlen);
@@ -162,7 +173,7 @@ uint32_t scan_dir(char* path, char mkdb, uint32_t this_dir_tgt) {
                 db_tgt += sizeof(next_subdir_tgt) + sizeof(len) + pathlen + 2;
               }
               parent_tgt = this_dir_tgt;
-              scan_dir(path, mkdb, next_subdir_tgt);
+              scan_dir(path, &fno, mkdb, next_subdir_tgt);
               dir_tgt += 4;
               was_empty = 0;
             }
@@ -172,6 +183,7 @@ uint32_t scan_dir(char* path, char mkdb, uint32_t this_dir_tgt) {
         } else {
           SNES_FTYPE type = determine_filetype((char*)fn);
           if(type != TYPE_UNKNOWN) {
+            num_files_total++;
             numentries++;
             if(pass) {
               if(mkdb) {
@@ -242,6 +254,8 @@ uint32_t scan_dir(char* path, char mkdb, uint32_t this_dir_tgt) {
 //  printf("db_tgt=%lx dir_end=%lx\n", db_tgt, dir_end);
   sram_writelong(db_tgt, SRAM_DB_ADDR+4);
   sram_writelong(dir_end, SRAM_DB_ADDR+8);
+  sram_writeshort(num_files_total, SRAM_DB_ADDR+12);
+  sram_writeshort(num_dirs_total, SRAM_DB_ADDR+14);
   return crc;
 }
 

src/filetypes.h

@@ -50,7 +50,7 @@ char fs_path[256];
 SNES_FTYPE determine_filetype(char* filename);
 //uint32_t scan_fs();
 uint16_t scan_flat(const char* path);
-uint32_t scan_dir(char* path, char mkdb, uint32_t this_subdir_tgt);
+uint32_t scan_dir(char* path, FILINFO* fno_param, char mkdb, uint32_t this_subdir_tgt);
 FRESULT get_db_id(uint32_t*);
 int get_num_dirent(uint32_t addr);
 void sort_all_dir(uint32_t endaddr);

src/flash.script

@@ -6,7 +6,7 @@
 #flash info 0
 
 reset init
-flash write_image erase unlock obj/firmware.img 12288
+flash write_image erase unlock obj/firmware.img 8192
 reset run
 shutdown
 

src/fpga_spi.c

@@ -47,9 +47,15 @@
                                 s: Bit 2 = partial, Bit 1:0 = target
                                 target: see above
 
-	60	sssseeee	set SD DMA partial transfer start+end
-				ssss = start offset (msb first)
-				eeee = end offset (msb first)
+	60	xsssyeee	set SD DMA partial transfer parameters
+				x: 0 = read from sector start (skip until
+				       start offset reached)
+				   8 = assume mid-sector position and read
+				       immediately
+				sss = start offset (msb first)
+				y: 0 = skip rest of SD sector
+				   8 = stop mid-sector if end offset reached
+				eee = end offset (msb first)
 
 	8p	-		read (RAM only)
 				p: 0 = no increment after read
@@ -80,6 +86,7 @@
 	EB	-		put DSP into reset
 	EC	-		release DSP from reset
 	ED	-		set feature enable bits (see below)
+	EE	-		set $213f override value (0=NTSC, 1=PAL)
 	F0	-		receive test token (to see if FPGA is alive)
 	F1	-		receive status (16bit, MSB first), see below
 
@@ -97,7 +104,7 @@
 	 15	SD DMA busy (0=idle, 1=busy)
 	 14	DAC read pointer MSB
 	 13	MSU read pointer MSB
-	 12	[TODO SD DMA CRC status (0=ok, 1=error); valid after bit 15 -> 0]
+	 12	reserved (0)
 	 11	reserved (0)
 	 10	reserved (0)
 	  9	reserved (0)
@@ -117,7 +124,7 @@
 	 7	-
 	 6	-
 	 5	-
-	 4	-
+	 4	enable $213F override
 	 3	enable MSU1 registers
 	 2	enable SRTC registers
 	 1	enable ST0010 mapping
@@ -133,6 +140,7 @@
 #include "spi.h"
 #include "fpga_spi.h"
 #include "timer.h"
+#include "sdnative.h"
 
 void fpga_spi_init(void) {
   spi_init(SPI_SPEED_FAST);
@@ -230,12 +238,14 @@ void fpga_sddma(uint8_t tgt, uint8_t partial) {
   FPGA_SELECT();
   FPGA_TX_BYTE(0xF1); /* STATUS */
   FPGA_TX_BYTE(0x00); /* dummy */
+  DBG_SD printf("FPGA DMA request sent, wait for completion...");
   while((status=FPGA_RX_BYTE()) & 0x80) {
     FPGA_RX_BYTE(); /* eat the 2nd status byte */
     test++;
   }
+  DBG_SD printf("...complete\n");
   FPGA_DESELECT();
-  if(test<5)printf("loopy: %ld %02x\n", test, status);
+//  if(test<5)printf("loopy: %ld %02x\n", test, status);
   BITBAND(SD_CLKREG->FIODIR, SD_CLKPIN) = 1;
 }
 
@@ -408,3 +418,11 @@ void fpga_set_features(uint8_t feat) {
   FPGA_DESELECT();
 }
 
+void fpga_set_213f(uint8_t data) {
+  printf("set 213f: %d\n", data);
+  FPGA_SELECT();
+  FPGA_TX_BYTE(0xee);
+  FPGA_TX_BYTE(data);
+  FPGA_DESELECT();
+}
+

src/fpga_spi.h

@@ -50,12 +50,14 @@
 #define FPGA_SPI_FAST()    spi_set_speed(SPI_SPEED_FPGA_FAST)
 #define FPGA_SPI_SLOW()    spi_set_speed(SPI_SPEED_FPGA_SLOW)
 
-#define FEAT_CX4           (1 << 4)
+#define FEAT_213F          (1 << 4)
 #define FEAT_MSU1          (1 << 3)
 #define FEAT_SRTC          (1 << 2)
 #define FEAT_ST0010        (1 << 1)
 #define FEAT_DSPX          (1 << 0)
 
+#define FEAT_CX4           (1 << 4)
+
 #define FPGA_WAIT_RDY()    do {while(BITBAND(SSP_REGS->SR, SSP_BSY)); while(!BITBAND(FPGA_MCU_RDY_REG->FIOPIN, FPGA_MCU_RDY_BIT));} while (0)
 
 void fpga_spi_init(void);
@@ -90,4 +92,5 @@ void fpga_write_dspx_pgm(uint32_t data);
 void fpga_write_dspx_dat(uint16_t data);
 void fpga_dspx_reset(uint8_t reset);
 void fpga_set_features(uint8_t feat);
+void fpga_set_213f(uint8_t data);
 #endif

src/lpc1754.ld

@@ -10,7 +10,7 @@ ENTRY(_start)
 
 MEMORY
 {
-  flash  (rx)  : ORIGIN = 0x00003100, LENGTH = 0x1cf00 /* leave room for bootldr + metadata */
+  flash  (rx)  : ORIGIN = 0x00002100, LENGTH = 0x1df00 /* leave room for bootldr + metadata */
   ram    (rwx) : ORIGIN = 0x10000000, LENGTH = 0x04000
   ahbram (rwx) : ORIGIN = 0x2007C000, LENGTH = 0x04000
 }

src/main.c

@@ -26,6 +26,7 @@
 #include "smc.h"
 #include "msu1.h"
 #include "rtc.h"
+#include "sysinfo.h"
 
 #define EMC0TOGGLE	(3<<4)
 #define MR0R		(1<<1)
@@ -34,6 +35,8 @@ int i;
 
 int sd_offload = 0, ff_sd_offload = 0, sd_offload_tgt = 0;
 int sd_offload_partial = 0;
+int sd_offload_start_mid = 0;
+int sd_offload_end_mid = 0;
 uint16_t sd_offload_partial_start = 0;
 uint16_t sd_offload_partial_end = 0;
 
@@ -75,7 +78,7 @@ int main(void) {
   LPC_PINCON->PINSEL0 |= BV(20) | BV(21);                  /* MAT3.0 (FPGA clock) */
 led_pwm();
   sdn_init();
-  printf("\n\nsd2snes mk.2\n============\nfw ver.: " VER "\ncpu clock: %d Hz\n", CONFIG_CPU_FREQUENCY);
+  printf("\n\nsd2snes mk.2\n============\nfw ver.: " CONFIG_VERSION "\ncpu clock: %d Hz\n", CONFIG_CPU_FREQUENCY);
 printf("PCONP=%lx\n", LPC_SC->PCONP);
 
   file_init();
@@ -145,7 +148,7 @@ printf("PCONP=%lx\n", LPC_SC->PCONP);
     if((mem_magic != 0x12345678) || (mem_dir_id != saved_dir_id) || (newcard)) {
       newcard = 0;
       /* generate fs footprint (interesting files only) */
-      uint32_t curr_dir_id = scan_dir(fs_path, 0, 0);
+      uint32_t curr_dir_id = scan_dir(fs_path, NULL, 0, 0);
       printf("curr dir id = %lx\n", curr_dir_id);
       /* files changed or no database found? */
       if((get_db_id(&saved_dir_id) != FR_OK)
@@ -154,7 +157,7 @@ printf("PCONP=%lx\n", LPC_SC->PCONP);
 	printf("saved dir id = %lx\n", saved_dir_id);
 	printf("rebuilding database...");
 	snes_bootprint("     rebuilding database ...    \0");
-	curr_dir_id = scan_dir(fs_path, 1, 0);
+	curr_dir_id = scan_dir(fs_path, NULL, 1, 0);
 	sram_writeblock(&curr_dir_id, SRAM_DB_ADDR, 4);
 	uint32_t endaddr, direndaddr;
 	sram_readblock(&endaddr, SRAM_DB_ADDR+4, 4);
@@ -208,7 +211,7 @@ printf("PCONP=%lx\n", LPC_SC->PCONP);
       sram_writebyte(0x00, SRAM_STATUS_ADDR+SYS_RTC_STATUS);
       set_fpga_time(get_bcdtime());
     }
-
+    sram_memset(SRAM_SYSINFO_ADDR, 13*40, 0x20);
     printf("SNES GO!\n");
     snes_reset(1);
     delay_ms(1);
@@ -243,8 +246,13 @@ printf("PCONP=%lx\n", LPC_SC->PCONP);
           /* set RTC */
           set_bcdtime(btime);
           set_fpga_time(btime);
-	  cmd=0; /* stay in loop */
+	  cmd=0; /* stay in menu loop */
 	  break;
+        case SNES_CMD_SYSINFO:
+          /* go to sysinfo loop */
+          sysinfo_loop();
+          cmd=0; /* stay in menu loop */
+          break;
 	default:
 	  printf("unknown cmd: %d\n", cmd);
 	  cmd=0; /* unknown cmd: stay in loop */

src/memory.c

@@ -281,7 +281,9 @@ uint32_t load_rom(uint8_t* filename, uint32_t base_addr, uint8_t flags) {
   printf("done\n");
 
   romprops.fpga_features |= FEAT_SRTC;
+  romprops.fpga_features |= FEAT_213F;
 
+  fpga_set_213f(romprops.region);
   fpga_set_features(romprops.fpga_features);
 
   if(flags & LOADROM_WITH_RESET) {

src/memory.h

@@ -30,19 +30,20 @@
 #include <arm/NXP/LPC17xx/LPC17xx.h>
 #include "smc.h"
 
-#define SRAM_ROM_ADDR (0x000000L)
-#define SRAM_SAVE_ADDR (0xE00000L)
+#define SRAM_ROM_ADDR           (0x000000L)
+#define SRAM_SAVE_ADDR          (0xE00000L)
 
-#define SRAM_MENU_ADDR (0xE00000L)
-#define SRAM_DB_ADDR (0xE20000L)
-#define SRAM_DIR_ADDR (0xE10000L)
-#define SRAM_CMD_ADDR (0xFF1000L)
-#define SRAM_PARAM_ADDR (0xFF1004L)
-#define SRAM_STATUS_ADDR (0xFF1100L)
-#define SRAM_MENU_SAVE_ADDR (0xFF0000L)
-#define SRAM_SCRATCHPAD (0xFFFF00L)
-#define SRAM_DIRID (0xFFFFF0L)
-#define SRAM_RELIABILITY_SCORE (0x100)
+#define SRAM_MENU_ADDR          (0xE00000L)
+#define SRAM_DB_ADDR            (0xE40000L)
+#define SRAM_DIR_ADDR           (0xE10000L)
+#define SRAM_CMD_ADDR           (0xFF1000L)
+#define SRAM_PARAM_ADDR         (0xFF1004L)
+#define SRAM_STATUS_ADDR        (0xFF1100L)
+#define SRAM_SYSINFO_ADDR       (0xFF1110L)
+#define SRAM_MENU_SAVE_ADDR     (0xFF0000L)
+#define SRAM_SCRATCHPAD         (0xFFFF00L)
+#define SRAM_DIRID              (0xFFFFF0L)
+#define SRAM_RELIABILITY_SCORE  (0x100)
 
 #define LOADROM_WITH_SRAM	(1)
 #define LOADROM_WITH_RESET	(2)

src/msu1.c

@@ -13,6 +13,9 @@
 #include "smc.h"
 
 FIL msufile;
+DWORD msu_cltbl[CLTBL_SIZE] IN_AHBRAM;
+DWORD pcm_cltbl[CLTBL_SIZE] IN_AHBRAM;
+
 extern snes_romprops_t romprops;
 
 int msu1_check_reset(void) {
@@ -40,6 +43,11 @@ int msu1_check(uint8_t* filename) {
     printf("MSU datafile not found\n");
     return 0;
   }
+  msufile.cltbl = msu_cltbl;
+  msu_cltbl[0] = CLTBL_SIZE;
+  if(f_lseek(&msufile, CREATE_LINKMAP)) {
+    printf("Error creating FF linkmap for MSU file!\n");
+  }
   romprops.fpga_features |= FEAT_MSU1;
   return 1;
 }
@@ -119,18 +127,21 @@ int msu1_loop() {
 
       /* get trackno */
       msu_track = get_msu_track();
-      printf("Audio requested! Track=%d\n", msu_track);
+      DBG_MSU1 printf("Audio requested! Track=%d\n", msu_track);
 
       /* open file, fill buffer */
       f_close(&file_handle);
       snprintf(suffix, sizeof(suffix), "-%d.pcm", msu_track);
       strcpy((char*)file_buf, (char*)file_lfn);
       strcpy(strrchr((char*)file_buf, (int)'.'), suffix);
-      printf("filename: %s\n", file_buf);
+      DBG_MSU1 printf("filename: %s\n", file_buf);
       f_open(&file_handle, (const TCHAR*)file_buf, FA_READ);
+      file_handle.cltbl = pcm_cltbl;
+      pcm_cltbl[0] = CLTBL_SIZE;
+      f_lseek(&file_handle, CREATE_LINKMAP);
       f_lseek(&file_handle, 4L);
       f_read(&file_handle, &msu_loop_point, 4, &bytes_read);
-      printf("loop point: %ld samples\n", msu_loop_point);
+      DBG_MSU1 printf("loop point: %ld samples\n", msu_loop_point);
       ff_sd_offload=1;
       sd_offload_tgt=1;
       f_lseek(&file_handle, 8L);
@@ -148,12 +159,12 @@ int msu1_loop() {
     if(fpga_status_now & 0x0010) {
       /* get address */
       msu_offset=get_msu_offset();
-      printf("Data requested! Offset=%08lx page1=%08lx page2=%08lx\n", msu_offset, msu_page1_start, msu_page2_start);
+      DBG_MSU1 printf("Data requested! Offset=%08lx page1=%08lx page2=%08lx\n", msu_offset, msu_page1_start, msu_page2_start);
       if(   ((msu_offset < msu_page1_start)
 	 || (msu_offset >= msu_page1_start + msu_page_size))
 	 && ((msu_offset < msu_page2_start)
 	 || (msu_offset >= msu_page2_start + msu_page_size))) {
-	printf("offset %08lx out of range (%08lx-%08lx, %08lx-%08lx), reload\n", msu_offset, msu_page1_start,
+	DBG_MSU1 printf("offset %08lx out of range (%08lx-%08lx, %08lx-%08lx), reload\n", msu_offset, msu_page1_start,
 	       msu_page1_start+msu_page_size-1, msu_page2_start, msu_page2_start+msu_page_size-1);
 	/* "cache miss" */
 	/* fill buffer */
@@ -209,19 +220,19 @@ int msu1_loop() {
       if(fpga_status_now & 0x0004) {
 	msu_repeat = 1;
 	set_msu_status(0x04, 0x01); /* set bit 2, reset bit 0 */
-	printf("Repeat set!\n");
+	DBG_MSU1 printf("Repeat set!\n");
       } else {
 	msu_repeat = 0;
 	set_msu_status(0x00, 0x05); /* set no bits, reset bit 0+2 */
-	printf("Repeat clear!\n");
+	DBG_MSU1 printf("Repeat clear!\n");
       }
 
       if(fpga_status_now & 0x0002) {
-	printf("PLAY!\n");
+	DBG_MSU1 printf("PLAY!\n");
 	set_msu_status(0x02, 0x01); /* set bit 0, reset bit 1 */
 	dac_play();
       } else {
-	printf("PAUSE!\n");
+	DBG_MSU1 printf("PAUSE!\n");
 	set_msu_status(0x00, 0x03); /* set no bits, reset bit 1+0 */
 	dac_pause();
       }
@@ -234,7 +245,7 @@ int msu1_loop() {
       ff_sd_offload=0;
       sd_offload=0;
       if(msu_repeat) {
-	printf("loop\n");
+	DBG_MSU1 printf("loop\n");
 	ff_sd_offload=1;
 	sd_offload_tgt=1;
 	f_lseek(&file_handle, 8L+msu_loop_point*4);
@@ -243,6 +254,7 @@ int msu1_loop() {
 	f_read(&file_handle, file_buf, (MSU_DAC_BUFSIZE / 2) - bytes_read, &bytes_read);
       } else {
 	set_msu_status(0x00, 0x02); /* clear play bit */
+	dac_pause();
       }
       bytes_read = MSU_DAC_BUFSIZE;
     }

src/sdnative.c

@@ -111,14 +111,16 @@
 uint8_t cmd[6]={0,0,0,0,0,0};
 uint8_t rsp[17];
 uint8_t csd[17];
+uint8_t cid[17];
 uint8_t ccs=0;
 uint32_t rca;
 
-enum trans_state { TRANS_NONE = 0, TRANS_READ, TRANS_WRITE };
+enum trans_state { TRANS_NONE = 0, TRANS_READ, TRANS_WRITE, TRANS_MID };
 enum cmd_state { CMD_RSP = 0, CMD_RSPDAT, CMD_DAT };
 
 int during_blocktrans = TRANS_NONE;
 uint32_t last_block = 0;
+uint16_t last_offset = 0;
 
 volatile int sd_changed;
 
@@ -158,6 +160,17 @@ static uint32_t getbits(void *buffer, uint16_t start, int8_t bits) {
   return result;
 }
 
+void sdn_checkinit(BYTE drv) {
+  if(disk_state == DISK_CHANGED) {
+    disk_initialize(drv);
+  }
+}
+
+uint8_t* sdn_getcid() {
+  sdn_checkinit(0);
+  return cid;
+}
+
 static inline void wiggle_slow_pos(uint16_t times) {
   while(times--) {
     delay_us(2);
@@ -383,7 +396,6 @@ int send_command_fast(uint8_t* cmd, uint8_t* rsp, uint8_t* buf){
       printf("CMD%d timed out\n", cmdno);
       return 0; /* no response within timeout */
     }
-
     i=rsplen;
     uint8_t cmddata=0, datdata=0;
     while(i--) { /* process response */
@@ -448,18 +460,31 @@ int send_command_fast(uint8_t* cmd, uint8_t* rsp, uint8_t* buf){
       state=CMD_DAT;
       j=datcnt;
       datshift=8;
+      timeout=2000000;
       DBG_SD printf("response over, waiting for data...\n");
+      /* wait for data start bit on DAT0 */
       while((BITBAND(SD_DAT0REG->FIOPIN, SD_DAT0PIN)) && --timeout) {
         wiggle_fast_neg1();
       }
+//printf("%ld\n", timeout);
+      DBG_SD if(!timeout) printf("timed out!\n");
       wiggle_fast_neg1(); /* eat the start bit */
       if(sd_offload) {
         if(sd_offload_partial) {
+          if(sd_offload_partial_start != 0) {
+            if(during_blocktrans == TRANS_MID) sd_offload_partial_start |= 0x8000;
+          }
+          if(sd_offload_partial_end != 512) {
+            sd_offload_partial_end |= 0x8000;
+          }
+          DBG_SD printf("new partial %d - %d\n", sd_offload_partial_start, sd_offload_partial_end);
           fpga_set_sddma_range(sd_offload_partial_start, sd_offload_partial_end);
           fpga_sddma(sd_offload_tgt, 1);
-          sd_offload_partial=0;
+//          sd_offload_partial=0;
+          last_offset=sd_offload_partial_end;
         } else {
           fpga_sddma(sd_offload_tgt, 0);
+          last_offset=0;
         }
         state=CMD_RSP;
         return rsplen;
@@ -576,27 +601,31 @@ int acmd_fast(uint8_t cmd, uint32_t param, uint8_t crc, uint8_t* dat, uint8_t* r
   return cmd_fast(cmd, param, crc, dat, rsp);
 }
 
-void sdn_checkinit(BYTE drv) {
-  if(disk_state == DISK_CHANGED) {
-    disk_initialize(drv);
-  }
-}
-
 int stream_datablock(uint8_t *buf) {
 //  uint8_t datshift=8;
   int j=512;
   uint8_t datdata=0;
   uint32_t timeout=1000000;
 
-  while((BITBAND(SD_DAT0REG->FIOPIN, SD_DAT0PIN)) && --timeout) {
-    wiggle_fast_neg1();
+  DBG_SD printf("stream_datablock: wait for ready...\n");
+  if(during_blocktrans != TRANS_MID) {
+    while((BITBAND(SD_DAT0REG->FIOPIN, SD_DAT0PIN)) && --timeout) {
+      wiggle_fast_neg1();
+    }
+    DBG_SD if(!timeout) printf("timeout!\n");
+    wiggle_fast_neg1(); /* eat the start bit */
   }
-  wiggle_fast_neg1(); /* eat the start bit */
   if(sd_offload) {
     if(sd_offload_partial) {
+      if(sd_offload_partial_start != 0) {
+        if(during_blocktrans == TRANS_MID) sd_offload_partial_start |= 0x8000;
+      }
+      if(sd_offload_partial_end != 512) {
+        sd_offload_partial_end |= 0x8000;
+      }
+      DBG_SD printf("str partial %d - %d\n", sd_offload_partial_start, sd_offload_partial_end);
       fpga_set_sddma_range(sd_offload_partial_start, sd_offload_partial_end);
       fpga_sddma(sd_offload_tgt, 1);
-      sd_offload_partial=0;
     } else {
       fpga_sddma(sd_offload_tgt, 0);
     }
@@ -748,6 +777,7 @@ void send_datablock(uint8_t *buf) {
 }
 
 void read_block(uint32_t address, uint8_t *buf) {
+  DBG_SD printf("read_block addr=%08lx last_addr=%08lx  offld=%d/%d offst=%04x offed=%04x last_off=%04x\n", address, last_block, sd_offload, sd_offload_partial, sd_offload_partial_start, sd_offload_partial_end, last_offset);
   if(during_blocktrans == TRANS_READ && (last_block == address-1)) {
 //uart_putc('r');
 #ifdef CONFIG_SD_DATACRC
@@ -761,7 +791,21 @@ void read_block(uint32_t address, uint8_t *buf) {
 #else
     stream_datablock(buf);
 #endif
-    last_block=address;
+    last_block = address;
+    last_offset = sd_offload_partial_end & 0x1ff;
+    if(sd_offload_partial && sd_offload_partial_end != 512) {
+      during_blocktrans = TRANS_MID;
+    }
+    sd_offload_partial = 0;
+  } else if (during_blocktrans == TRANS_MID
+             && last_block == address
+             && last_offset == sd_offload_partial_start
+             && sd_offload_partial) {
+    sd_offload_partial_start |= 0x8000;
+    stream_datablock(buf);
+    during_blocktrans = TRANS_READ;
+    last_offset = sd_offload_partial_end & 0x1ff;
+    sd_offload_partial = 0;
   } else {
     if(during_blocktrans) {
 //      uart_putc('_');
@@ -769,7 +813,8 @@ void read_block(uint32_t address, uint8_t *buf) {
       /* send STOP_TRANSMISSION to end an open READ/WRITE_MULTIPLE_BLOCK */
       cmd_fast(STOP_TRANSMISSION, 0, 0x61, NULL, rsp);
     }
-    last_block=address;
+    during_blocktrans = TRANS_READ;
+    last_block = address;
     if(!ccs) {
       address <<= 9;
     }
@@ -781,8 +826,9 @@ void read_block(uint32_t address, uint8_t *buf) {
 #else
     cmd_fast(READ_MULTIPLE_BLOCK, address, 0, buf, rsp);
 #endif
-    during_blocktrans = TRANS_READ;
+    sd_offload_partial = 0;
   }
+//  printf("trans state = %d\n", during_blocktrans);
 }
 
 void write_block(uint32_t address, uint8_t* buf) {
@@ -867,6 +913,9 @@ DRESULT sdn_initialize(BYTE drv) {
     if(rsp[1]&0x80) break;
   }
 
+  BITBAND(SD_DAT3REG->FIODIR, SD_DAT3PIN) = 0;
+  BITBAND(SD_DAT3REG->FIOCLR, SD_DAT3PIN) = 1;
+
   ccs = (rsp[1]>>6) & 1; /* SDHC/XC */
 
   cmd_slow(ALL_SEND_CID, 0, 0x4d, NULL, rsp);
@@ -879,7 +928,10 @@ DRESULT sdn_initialize(BYTE drv) {
   }
 
   /* record CSD for getinfo */
-  cmd_slow(SEND_CSD, rca, 0, NULL, rsp);
+  cmd_slow(SEND_CSD, rca, 0, NULL, csd);
+
+  /* record CID */
+  cmd_slow(SEND_CID, rca, 0, NULL, cid);
 
   /* select the card */
   if(cmd_slow(SELECT_CARD, rca, 0, NULL, rsp)) {

src/sdnative.h

@@ -24,6 +24,7 @@ DRESULT sdn_write(BYTE drv, const BYTE *buffer, DWORD sector, BYTE count);
 DRESULT sdn_getinfo(BYTE drv, BYTE page, void *buffer);
 
 void    sdn_changed(void);
+uint8_t* sdn_getcid(void);
 
 #endif
 

src/smc.c

@@ -34,28 +34,6 @@
 snes_romprops_t romprops;
 
 uint32_t hdr_addr[6] = {0xffb0, 0x101b0, 0x7fb0, 0x81b0, 0x40ffb0, 0x4101b0};
-uint8_t countAllASCII(uint8_t* data, int size) {
-  uint8_t res = 0;
-  do {
-    size--;
-    if(data[size] >= 0x20 && data[size] <= 0x7e) {
-      res++;
-    }
-  } while (size);
-  return res;
-}
-
-uint8_t countAllJISX0201(uint8_t* data, int size) {
-  uint8_t res = 0;
-  do {
-    size--;
-    if((data[size] >= 0x20 && data[size] <= 0x7e)
-       ||(data[size] >= 0xa1 && data[size] <= 0xdf)) {
-      res++;
-    }
-  } while (size);
-  return res;
-}
 
 uint8_t isFixed(uint8_t* data, int size, uint8_t value) {
   uint8_t res = 1;
@@ -72,7 +50,7 @@ uint8_t checkChksum(uint16_t cchk, uint16_t chk) {
   uint32_t sum = cchk + chk;
   uint8_t res = 0;
   if(sum==0x0000ffff) {
-    res = 0x10;
+    res = 1;
   }
   return res;
 }
@@ -87,32 +65,13 @@ void smc_id(snes_romprops_t* props) {
   props->fpga_features = 0;
   props->fpga_conf = NULL;
   for(uint8_t num = 0; num < 6; num++) {
-    if(!file_readblock(header, hdr_addr[num], sizeof(snes_header_t))
-       || file_res) {
-      score = 0;
-    } else {
-      score = smc_headerscore(header)/(1+(num&1));
-      if((file_handle.fsize & 0x2ff) == 0x200) {
-        if(num&1) {
-          score+=20;
-        } else {
-          score=0;
-        }
-      } else {
-        if(!(num&1)) {
-          score+=20;
-        } else {
-          score=0;
-        }
-      }
-    }
-//printf("%d: offset = %lX; score = %d\n", num, hdr_addr[num], score); // */
+    score = smc_headerscore(hdr_addr[num], header);
+    printf("%d: offset = %lX; score = %d\n", num, hdr_addr[num], score); // */
     if(score>=maxscore) {
       score_idx=num;
       maxscore=score;
     }
   }
-
   if(score_idx & 1) {
     props->offset = 0x200;
   } else {
@@ -163,7 +122,7 @@ void smc_id(snes_romprops_t* props) {
           (header->map == 0x30 && header->carttype == 0x05 && header->licensee != 0xb2)) {
         props->has_dspx = 1;
         props->fpga_features |= FEAT_DSPX;
-        // Pilotwings uses DSP1 instead of DSP1B
+        /* Pilotwings uses DSP1 instead of DSP1B */
         if(!memcmp(header->name, "PILOTWINGS", 10)) {
           props->dsp_fw = DSPFW_1;
         } else {
@@ -236,17 +195,86 @@ void smc_id(snes_romprops_t* props) {
   if(props->ramsize_bytes > 32768 || props->ramsize_bytes < 2048) {
     props->ramsize_bytes = 0;
   }
+  props->region = (header->destcode <= 1 || header->destcode >= 13) ? 0 : 1;
+
 /*dprintf("ramsize_bytes: %ld\n", props->ramsize_bytes); */
 }
 
-uint8_t smc_headerscore(snes_header_t* header) {
-  uint8_t score=0;
-  score += countAllASCII(header->maker, sizeof(header->maker));
-  score += countAllASCII(header->gamecode, sizeof(header->gamecode));
-  score += isFixed(header->fixed_00, sizeof(header->fixed_00), 0x00);
-  score += countAllJISX0201(header->name, sizeof(header->name));
-  score += 3*isFixed(&header->licensee, sizeof(header->licensee), 0x33);
-  score += checkChksum(header->cchk, header->chk);
+uint8_t smc_headerscore(uint32_t addr, snes_header_t* header) {
+  int score=0;
+  uint8_t reset_inst;
+  uint16_t header_offset;
+  if((addr & 0xfff) == 0x1b0) {
+    header_offset = 0x200;
+  } else {
+    header_offset = 0;
+  }
+  if((file_readblock(header, addr, sizeof(snes_header_t)) < sizeof(snes_header_t))
+     || file_res) {
+    return 0;
+  }
+  uint8_t mapper = header->map & ~0x10;
+  uint16_t resetvector = header->vect_reset; /* not endian safe! */
+  uint32_t file_addr = (((addr - header_offset) & ~0x7fff) | (resetvector & 0x7fff)) + header_offset;
+  if(resetvector < 0x8000) return 0;
+
+  score += 2*isFixed(&header->licensee, sizeof(header->licensee), 0x33);
+  score += 4*checkChksum(header->cchk, header->chk);
+  if(header->carttype < 0x08) score++;
+  if(header->romsize < 0x10) score++;
+  if(header->ramsize < 0x08) score++;
+  if(header->destcode < 0x0e) score++;
+
+  if((addr-header_offset) == 0x007fc0 && mapper == 0x20) score += 2;
+  if((addr-header_offset) == 0x00ffc0 && mapper == 0x21) score += 2;
+  if((addr-header_offset) == 0x007fc0 && mapper == 0x22) score += 2;
+  if((addr-header_offset) == 0x40ffc0 && mapper == 0x25) score += 2;
+
+  file_readblock(&reset_inst, file_addr, 1);
+  switch(reset_inst) {
+    case 0x78: /* sei */
+    case 0x18: /* clc */
+    case 0x38: /* sec */
+    case 0x9c: /* stz abs */
+    case 0x4c: /* jmp abs */
+    case 0x5c: /* jml abs */
+      score += 8;
+      break;
+
+    case 0xc2: /* rep */
+    case 0xe2: /* sep */
+    case 0xad: /* lda abs */
+    case 0xae: /* ldx abs */
+    case 0xac: /* ldy abs */
+    case 0xaf: /* lda abs long */
+    case 0xa9: /* lda imm */
+    case 0xa2: /* ldx imm */
+    case 0xa0: /* ldy imm */
+    case 0x20: /* jsr abs */
+    case 0x22: /* jsl abs */
+      score += 4;
+      break;
+
+    case 0x40: /* rti */
+    case 0x60: /* rts */
+    case 0x6b: /* rtl */
+    case 0xcd: /* cmp abs */
+    case 0xec: /* cpx abs */
+    case 0xcc: /* cpy abs */
+      score -= 4;
+      break;
+
+    case 0x00: /* brk */
+    case 0x02: /* cop */
+    case 0xdb: /* stp */
+    case 0x42: /* wdm */
+    case 0xff: /* sbc abs long indexed */
+      score -= 8;
+      break;
+  }
+
+  if(score && addr > 0x400000) score += 4;
+  if(score < 0) score = 0;
   return score;
 }
 

src/smc.h

@@ -54,6 +54,19 @@ typedef struct _snes_header {
   uint8_t ver;          /* 0xDB */
   uint16_t cchk;        /* 0xDC */
   uint16_t chk;         /* 0xDE */
+  uint32_t pad1;        /* 0xE0 */
+  uint16_t vect_cop16;	/* 0xE4 */
+  uint16_t vect_brk16;  /* 0xE6 */
+  uint16_t vect_abt16;  /* 0xE8 */
+  uint16_t vect_nmi16;  /* 0xEA */
+  uint16_t vect_irq16;  /* 0xEE */
+  uint16_t pad2;        /* 0xF0 */
+  uint16_t vect_cop8;   /* 0xF4 */
+  uint32_t pad3;        /* 0xF6 */
+  uint16_t vect_abt8;   /* 0xF8 */
+  uint16_t vect_nmi8;   /* 0xFA */
+  uint16_t vect_reset;  /* 0xFC */
+  uint16_t vect_brk8;   /* 0xFE */
 } snes_header_t;
 
 typedef struct _snes_romprops {
@@ -66,14 +79,15 @@ typedef struct _snes_romprops {
   const uint8_t* dsp_fw;      /* DSP (NEC / Hitachi) ROM filename */
   const uint8_t* fpga_conf;   /* FPGA config file to load (default: base) */
   uint8_t has_dspx;           /* DSP[1-4] presence flag */
-  uint8_t has_st0010;         /* st0010 presence flag (additional to dspx)*/
+  uint8_t has_st0010;         /* st0010 presence flag (additional to dspx) */
   uint8_t has_msu1;           /* MSU1 presence flag */
   uint8_t has_cx4;            /* CX4 presence flag */
   uint8_t fpga_features;      /* feature/peripheral enable bits*/
+  uint8_t region;             /* game region (derived from destination code) */
   snes_header_t header;       /* original header from ROM image */
 } snes_romprops_t;
 
 void smc_id(snes_romprops_t*);
-uint8_t smc_headerscore(snes_header_t*);
+uint8_t smc_headerscore(uint32_t addr, snes_header_t* header);
 
 #endif

src/snes.h

@@ -29,6 +29,7 @@
 
 #define SNES_CMD_LOADROM   (1)
 #define SNES_CMD_SETRTC    (2)
+#define SNES_CMD_SYSINFO   (3)
 
 #define MENU_ERR_OK		(0)
 #define MENU_ERR_NODSP	(1)

src/tests/Makefile

@@ -0,0 +1,318 @@
+# Hey Emacs, this is a -*- makefile -*-
+
+#----------------------------------------------------------------------------
+# WinAVR Makefile Template written by Eric B. Weddington, Joerg Wunsch, et al.
+#
+# Released to the Public Domain
+#
+# Additional material for this makefile was written by:
+# Peter Fleury
+# Tim Henigan
+# Colin O'Flynn
+# Reiner Patommel
+# Markus Pfaff
+# Sander Pool
+# Frederik Rouleau
+# Carlos Lamas
+#
+#
+# Extensively modified for sd2iec and later adapted for ARM by Ingo Korb
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Read configuration file
+ifdef CONFIG
+ CONFIGSUFFIX = $(CONFIG:config%=%)
+else
+ CONFIG = config
+ CONFIGSUFFIX =
+endif
+
+# Enable verbose compilation with "make V=1"
+ifdef V
+ Q :=
+ E := @:
+else
+ Q := @
+ E := @echo
+endif
+
+# Include the configuration file
+include $(CONFIG)
+
+# Directory for all generated files
+OBJDIR := obj$(CONFIGSUFFIX)
+
+# Output format. (can be srec, ihex, binary)
+FORMAT = binary
+
+# Linker script
+LINKERSCRIPT = lpc1754.ld
+
+# Target file name (without extension).
+TARGET = $(OBJDIR)/sd2snes
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC = main.c ff.c ccsbcs.c clock.c uart.c power.c led.c timer.c printf.c spi.c fileops.c rtc.c fpga.c fpga_spi.c snes.c smc.c memory.c filetypes.c faulthandler.c sort.c crc32.c cic.c cli.c xmodem.c irq.c rle.c sdnative.c msu1.c tests.c
+
+# usbcontrol.c usb_hid.c usbhw_lpc.c usbinit.c usbstdreq.c
+
+
+# List Assembler source files here.
+#     Make them always end in a capital .S.  Files ending in a lowercase .s
+#     will not be considered source files but generated files (assembler
+#     output from the compiler), and will be deleted upon "make clean"!
+#     Even though the DOS/Win* filesystem matches both .s and .S the same,
+#     it will preserve the spelling of the filenames, and gcc itself does
+#     care about how the name is spelled on its command-line.
+ASRC = startup.S crc.S
+
+
+# Optimization level, can be [0, 1, 2, 3, s].
+#     0 = turn off optimization. s = optimize for size.
+#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+# Use s -mcall-prologues when you really need size...
+#OPT = 2
+OPT = 2
+
+# Debugging format.
+DEBUG = dwarf-2
+
+
+# List any extra directories to look for include files here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRAINCDIRS =
+
+
+# Compiler flag to set the C Standard level.
+#     c89   = "ANSI" C
+#     gnu89 = c89 plus GCC extensions
+#     c99   = ISO C99 standard (not yet fully implemented)
+#     gnu99 = c99 plus GCC extensions
+CSTANDARD = -std=gnu99
+
+
+# Place -D or -U options here
+CDEFS = -DF_OSC=$(CONFIG_MCU_FOSC)UL
+
+
+# Place -I options here
+CINCS =
+
+
+# CPU-specific flags
+ifndef CPUFLAGS
+  CPUFLAGS := -mthumb -mcpu=cortex-m3
+endif
+
+ifndef ARCH
+  ARCH := arm-none-eabi
+endif
+
+# Define programs and commands.
+# CC must be defined here to generate the correct CFLAGS
+SHELL = sh
+CC = $(ARCH)-gcc
+OBJCOPY = $(ARCH)-objcopy
+OBJDUMP = $(ARCH)-objdump
+SIZE = $(ARCH)-size
+NM = $(ARCH)-nm
+REMOVE = rm -f
+COPY = cp
+AWK = awk
+
+
+#---------------- Compiler Options ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CFLAGS = -g$(DEBUG)
+CFLAGS += $(CDEFS) $(CINCS)
+CFLAGS += -O$(OPT)
+CFLAGS += $(CPUFLAGS) -nostartfiles
+#CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
+CFLAGS += -Wall -Wstrict-prototypes -Werror
+CFLAGS += -Wa,-adhlns=$(OBJDIR)/$(<:.c=.lst)
+CFLAGS += -I$(OBJDIR)
+CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+CFLAGS += $(CSTANDARD)
+CFLAGS += -ffunction-sections -fdata-sections
+
+
+#---------------- Assembler Options ----------------
+#  -Wa,...:   tell GCC to pass this to the assembler.
+#  -ahlms:    create listing
+#  -gstabs:   have the assembler create line number information; note that
+#             for use in COFF files, additional information about filenames
+#             and function names needs to be present in the assembler source
+#             files -- see avr-libc docs [FIXME: not yet described there]
+ASFLAGS = $(CPUFLAGS) -Wa,-adhlns=$(OBJDIR)/$(<:.S=.lst),-gstabs -I$(OBJDIR)
+
+
+#---------------- Linker Options ----------------
+#  -Wl,...:     tell GCC to pass this to linker.
+#    -Map:      create map file
+#    --cref:    add cross reference to  map file
+LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
+LDFLAGS += -T$(LINKERSCRIPT)
+LDFLAGS += -Wl,--gc-sections
+ifeq ($(CONFIG_LINKER_RELAX),y)
+  LDFLAGS += -Wl,-O9,--relax
+endif
+
+
+#============================================================================
+
+
+# De-dupe the list of C source files
+CSRC := $(sort $(SRC))
+
+# Define all object files.
+OBJ := $(patsubst %,$(OBJDIR)/%,$(CSRC:.c=.o) $(ASRC:.S=.o))
+
+# Define all listing files.
+LST := $(patsubst %,$(OBJDIR)/%,$(CSRC:.c=.lst) $(ASRC:.S=.lst))
+
+
+# Compiler flags to generate dependency files.
+GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
+
+
+# Combine all necessary flags and optional flags.
+# Add target processor to flags.
+ALL_CFLAGS = -I. $(CFLAGS) $(GENDEPFLAGS)
+ALL_ASFLAGS = -I. -x assembler-with-cpp $(ASFLAGS) $(CDEFS)
+
+
+
+
+
+# Default target.
+all: build
+
+build: elf bin hex
+	$(E) "  SIZE   $(TARGET).elf"
+	$(Q)$(ELFSIZE)|grep -v debug
+	cp $(TARGET).bin $(OBJDIR)/firmware.img
+	utils/genhdr $(OBJDIR)/firmware.img SNSD $(CONFIG_FWVER)
+
+elf: $(TARGET).elf
+bin: $(TARGET).bin
+hex: $(TARGET).hex
+eep: $(TARGET).eep
+lss: $(TARGET).lss
+sym: $(TARGET).sym
+
+# # A little helper target for the maintainer =)
+# copy2card:
+#	cp $(TARGET).bin /mbed/hw_LPC1768.bin
+
+
+program: build
+	utils/lpcchksum $(TARGET).bin
+	openocd -f openocd-usb.cfg -f lpc1754.cfg -f flash.cfg
+
+debug: build
+	openocd -f openocd-usb.cfg -f lpc1754.cfg
+
+reset:
+	openocd -f openocd-usb.cfg -f lpc1754.cfg -f reset.cfg
+
+# Display size of file.
+HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
+ELFSIZE = $(SIZE) -A $(TARGET).elf
+
+
+
+# Generate autoconf.h from config
+.PRECIOUS : $(OBJDIR)/autoconf.h
+$(OBJDIR)/autoconf.h: $(CONFIG) | $(OBJDIR)
+	$(E) "  CONF2H $(CONFIG)"
+	$(Q)$(AWK) -f conf2h.awk $(CONFIG) > $(OBJDIR)/autoconf.h
+
+# Create final output files from ELF output file.
+$(OBJDIR)/%.bin: $(OBJDIR)/%.elf
+	$(E) "  BIN    $@"
+	$(Q)$(OBJCOPY) -O binary $< $@
+
+$(OBJDIR)/%.hex: $(OBJDIR)/%.elf
+	$(E) "  HEX    $@"
+	$(Q)$(OBJCOPY) -O $(FORMAT) $< $@
+
+# Create extended listing file from ELF output file.
+$(OBJDIR)/%.lss: $(OBJDIR)/%.elf
+	$(E) "  LSS    $<"
+	$(Q)$(OBJDUMP) -h -S $< > $@
+
+# Create a symbol table from ELF output file.
+$(OBJDIR)/%.sym: $(OBJDIR)/%.elf
+	$(E) "  SYM    $<"
+	$(E)$(NM) -n $< > $@
+
+
+# Link: create ELF output file from object files.
+.SECONDARY : $(TARGET).elf
+.PRECIOUS : $(OBJ)
+$(TARGET).elf : $(OBJ)
+	$(E) "  LINK   $@"
+	$(Q)$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
+
+
+# Compile: create object files from C source files.
+$(OBJDIR)/%.o : %.c | $(OBJDIR) $(OBJDIR)/autoconf.h
+	$(E) "  CC     $<"
+	$(Q)$(CC) -c $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C source files.
+$(OBJDIR)/%.s : %.c | $(OBJDIR) $(OBJDIR)/autoconf.h
+	$(CC) -S $(ALL_CFLAGS) $< -o $@
+
+
+# Assemble: create object files from assembler source files.
+$(OBJDIR)/%.o : %.S | $(OBJDIR) $(OBJDIR)/autoconf.h
+	$(E) "  AS     $<"
+	$(Q)$(CC) -c $(ALL_ASFLAGS) $< -o $@
+
+# Create preprocessed source for use in sending a bug report.
+$(OBJDIR)/%.i : %.c | $(OBJDIR) $(OBJDIR)/autoconf.h
+	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
+
+# Create the output directory
+$(OBJDIR) :
+	$(E) "  MKDIR  $(OBJDIR)"
+	$(Q)mkdir $(OBJDIR)
+
+# Target: clean project.
+clean: begin clean_list end
+
+clean_list :
+	$(E) "  CLEAN"
+	$(Q)$(REMOVE) $(TARGET).hex
+	$(Q)$(REMOVE) $(TARGET).bin
+	$(Q)$(REMOVE) $(TARGET).elf
+	$(Q)$(REMOVE) $(TARGET).map
+	$(Q)$(REMOVE) $(TARGET).sym
+	$(Q)$(REMOVE) $(TARGET).lss
+	$(Q)$(REMOVE) $(OBJ)
+	$(Q)$(REMOVE) $(OBJDIR)/autoconf.h
+	$(Q)$(REMOVE) $(OBJDIR)/*.bin
+	$(Q)$(REMOVE) $(LST)
+	$(Q)$(REMOVE) $(CSRC:.c=.s)
+	$(Q)$(REMOVE) $(CSRC:.c=.d)
+	$(Q)$(REMOVE) .dep/*
+	-$(Q)rmdir $(OBJDIR)
+
+# Include the dependency files.
+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+
+# Listing of phony targets.
+.PHONY : all begin finish end sizebefore sizeafter \
+build elf hex lss sym clean clean_list

src/tests/bits.h

@@ -0,0 +1,21 @@
+#ifndef _ARM_BITS_H
+#define _ARM_BITS_H
+
+/* The classic macro */
+#define BV(x) (1<<(x))
+
+/* CM3 bit-band access macro - no error checks! */
+#define BITBAND(addr,bit) \
+  (*((volatile unsigned long *)( \
+     ((unsigned long)&(addr) & 0x01ffffff)*32 + \
+      (bit)*4 + 0x02000000 + ((unsigned long)&(addr) & 0xfe000000) \
+  )))
+
+#define BITBAND_OFF(addr,offset,bit) \
+  (*((volatile unsigned long *)( \
+     (((unsigned long)&(addr) + offset) & 0x01ffffff)*32 + \
+      (bit)*4 + 0x02000000 + (((unsigned long)&(addr) + offset) & 0xfe000000) \
+  )))
+
+
+#endif

src/tests/ccsbcs.c

@@ -0,0 +1,540 @@
+/*------------------------------------------------------------------------*/
+/* Unicode - Local code bidirectional converter  (C)ChaN, 2009            */
+/* (SBCS code pages)                                                      */
+/*------------------------------------------------------------------------*/
+/*  437   U.S. (OEM)
+/   720   Arabic (OEM)
+/   1256  Arabic (Windows)
+/   737   Greek (OEM)
+/   1253  Greek (Windows)
+/   1250  Central Europe (Windows)
+/   775   Baltic (OEM)
+/   1257  Baltic (Windows)
+/   850   Multilingual Latin 1 (OEM)
+/   852   Latin 2 (OEM)
+/   1252  Latin 1 (Windows)
+/   855   Cyrillic (OEM)
+/   1251  Cyrillic (Windows)
+/   866   Russian (OEM)
+/   857   Turkish (OEM)
+/   1254  Turkish (Windows)
+/   858   Multilingual Latin 1 + Euro (OEM)
+/   862   Hebrew (OEM)
+/   1255  Hebrew (Windows)
+/   874   Thai (OEM, Windows)
+/   1258  Vietnam (OEM, Windows)
+*/
+
+#include "../ff.h"
+
+
+#if _CODE_PAGE == 437
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP437(0x80-0xFF) to Unicode conversion table */
+	0x00C7, 0x00FC, 0x00E9, 0x00E2, 0x00E4, 0x00E0, 0x00E5, 0x00E7,
+	0x00EA, 0x00EB, 0x00E8, 0x00EF, 0x00EE, 0x00EC, 0x00C4, 0x00C5,
+	0x00C9, 0x00E6, 0x00C6, 0x00F4, 0x00F6, 0x00F2, 0x00FB, 0x00F9,
+	0x00FF, 0x00D6, 0x00DC, 0x00A2, 0x00A3, 0x00A5, 0x20A7, 0x0192,
+	0x00E1, 0x00ED, 0x00F3, 0x00FA, 0x00F1, 0x00D1, 0x00AA, 0x00BA,
+	0x00BF, 0x2310, 0x00AC, 0x00BD, 0x00BC, 0x00A1, 0x00AB, 0x00BB,
+	0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556,
+	0x2555, 0x2563, 0x2551, 0x2557, 0x255D, 0x255C, 0x255B, 0x2510,
+	0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x255E, 0x255F,
+	0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x2567,
+	0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256B,
+	0x256A, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580,
+	0x03B1, 0x00DF, 0x0393, 0x03C0, 0x03A3, 0x03C3, 0x00B5, 0x03C4,
+	0x03A6, 0x0398, 0x03A9, 0x03B4, 0x221E, 0x03C6, 0x03B5, 0x2229,
+	0x2261, 0x00B1, 0x2265, 0x2264, 0x2320, 0x2321, 0x00F7, 0x2248,
+	0x00B0, 0x2219, 0x00B7, 0x221A, 0x207F, 0x00B2, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 720
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP720(0x80-0xFF) to Unicode conversion table */
+	0x0000, 0x0000, 0x00E9, 0x00E2, 0x0000, 0x00E0, 0x0000, 0x00E7,
+	0x00EA, 0x00EB, 0x00E8, 0x00EF, 0x00EE, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x0651, 0x0652, 0x00F4, 0x00A4, 0x0640, 0x00FB, 0x00F9,
+	0x0621, 0x0622, 0x0623, 0x0624, 0x00A3, 0x0625, 0x0626, 0x0627,
+	0x0628, 0x0629, 0x062A, 0x062B, 0x062C, 0x062D, 0x062E, 0x062F,
+	0x0630, 0x0631, 0x0632, 0x0633, 0x0634, 0x0635, 0x00AB, 0x00BB,
+	0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556,
+	0x2555, 0x2563, 0x2551, 0x2557, 0x255D, 0x255C, 0x255B, 0x2510,
+	0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x255E, 0x255F,
+	0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x2567,
+	0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256B,
+	0x256A, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580,
+	0x0636, 0x0637, 0x0638, 0x0639, 0x063A, 0x0641, 0x00B5, 0x0642,
+	0x0643, 0x0644, 0x0645, 0x0646, 0x0647, 0x0648, 0x0649, 0x064A,
+	0x2261, 0x064B, 0x064C, 0x064D, 0x064E, 0x064F, 0xO650, 0x2248,
+	0x00B0, 0x2219, 0x00B7, 0x221A, 0x207F, 0x00B2, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 737
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP737(0x80-0xFF) to Unicode conversion table */
+	0x0391, 0x0392, 0x0393, 0x0394, 0x0395, 0x0396, 0x0397, 0x0398,
+	0x0399, 0x039A, 0x039B, 0x039C, 0x039D, 0x039E, 0x039F, 0x03A0,
+	0x03A1, 0x03A3, 0x03A4, 0x03A5, 0x03A6, 0x03A7, 0x03A8, 0x03A9,
+	0x03B1, 0x03B2, 0x03B3, 0x03B4, 0x03B5, 0x03B6, 0x03B7, 0x03B8,
+	0x03B9, 0x03BA, 0x03BB, 0x03BC, 0x03BD, 0x03BE, 0x03BF, 0x03C0,
+	0x03C1, 0x03C3, 0x03C2, 0x03C4, 0x03C5, 0x03C6, 0x03C7, 0x03C8,
+	0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556,
+	0x2555, 0x2563, 0x2551, 0x2557, 0x255D, 0x255C, 0x255B, 0x2510,
+	0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x255E, 0x255F,
+	0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x2567,
+	0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256B,
+	0x256A, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580,
+	0x03C9, 0x03AC, 0x03AD, 0x03AE, 0x03CA, 0x03AF, 0x03CC, 0x03CD,
+	0x03CB, 0x03CE, 0x0386, 0x0388, 0x0389, 0x038A, 0x038C, 0x038E,
+	0x038F, 0x00B1, 0x2265, 0x2264, 0x03AA, 0x03AB, 0x00F7, 0x2248,
+	0x00B0, 0x2219, 0x00B7, 0x221A, 0x207F, 0x00B2, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 775
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP775(0x80-0xFF) to Unicode conversion table */
+	0x0106, 0x00FC, 0x00E9, 0x0101, 0x00E4, 0x0123, 0x00E5, 0x0107,
+	0x0142, 0x0113, 0x0156, 0x0157, 0x012B, 0x0179, 0x00C4, 0x00C5,
+	0x00C9, 0x00E6, 0x00C6, 0x014D, 0x00F6, 0x0122, 0x00A2, 0x015A,
+	0x015B, 0x00D6, 0x00DC, 0x00F8, 0x00A3, 0x00D8, 0x00D7, 0x00A4,
+	0x0100, 0x012A, 0x00F3, 0x017B, 0x017C, 0x017A, 0x201D, 0x00A6,
+	0x00A9, 0x00AE, 0x00AC, 0x00BD, 0x00BC, 0x0141, 0x00AB, 0x00BB,
+	0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x0104, 0x010C, 0x0118,
+	0x0116, 0x2563, 0x2551, 0x2557, 0x255D, 0x012E, 0x0160, 0x2510,
+	0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x0172, 0x016A,
+	0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x017D,
+	0x0105, 0x010D, 0x0119, 0x0117, 0x012F, 0x0161, 0x0173, 0x016B,
+	0x017E, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580,
+	0x00D3, 0x00DF, 0x014C, 0x0143, 0x00F5, 0x00D5, 0x00B5, 0x0144,
+	0x0136, 0x0137, 0x013B, 0x013C, 0x0146, 0x0112, 0x0145, 0x2019,
+	0x00AD, 0x00B1, 0x201C, 0x00BE, 0x00B6, 0x00A7, 0x00F7, 0x201E,
+	0x00B0, 0x2219, 0x00B7, 0x00B9, 0x00B3, 0x00B2, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 850
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP850(0x80-0xFF) to Unicode conversion table */
+	0x00C7, 0x00FC, 0x00E9, 0x00E2, 0x00E4, 0x00E0, 0x00E5, 0x00E7,
+	0x00EA, 0x00EB, 0x00E8, 0x00EF, 0x00EE, 0x00EC, 0x00C4, 0x00C5,
+	0x00C9, 0x00E6, 0x00C6, 0x00F4, 0x00F6, 0x00F2, 0x00FB, 0x00F9,
+	0x00FF, 0x00D6, 0x00DC, 0x00F8, 0x00A3, 0x00D8, 0x00D7, 0x0192,
+	0x00E1, 0x00ED, 0x00F3, 0x00FA, 0x00F1, 0x00D1, 0x00AA, 0x00BA,
+	0x00BF, 0x00AE, 0x00AC, 0x00BD, 0x00BC, 0x00A1, 0x00AB, 0x00BB,
+	0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x00C1, 0x00C2, 0x00C0,
+	0x00A9, 0x2563, 0x2551, 0x2557, 0x255D, 0x00A2, 0x00A5, 0x2510,
+	0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x00E3, 0x00C3,
+	0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x00A4,
+	0x00F0, 0x00D0, 0x00CA, 0x00CB, 0x00C8, 0x0131, 0x00CD, 0x00CE,
+	0x00CF, 0x2518, 0x250C, 0x2588, 0x2584, 0x00A6, 0x00CC, 0x2580,
+	0x00D3, 0x00DF, 0x00D4, 0x00D2, 0x00F5, 0x00D5, 0x00B5, 0x00FE,
+	0x00DE, 0x00DA, 0x00DB, 0x00D9, 0x00FD, 0x00DD, 0x00AF, 0x00B4,
+	0x00AD, 0x00B1, 0x2017, 0x00BE, 0x00B6, 0x00A7, 0x00F7, 0x00B8,
+	0x00B0, 0x00A8, 0x00B7, 0x00B9, 0x00B3, 0x00B2, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 852
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP852(0x80-0xFF) to Unicode conversion table */
+	0x00C7, 0x00FC, 0x00E9, 0x00E2, 0x00E4, 0x016F, 0x0107, 0x00E7,
+	0x0142, 0x00EB, 0x0150, 0x0151, 0x00EE, 0x0179, 0x00C4, 0x0106,
+	0x00C9, 0x0139, 0x013A, 0x00F4, 0x00F6, 0x013D, 0x013E, 0x015A,
+	0x015B, 0x00D6, 0x00DC, 0x0164, 0x0165, 0x0141, 0x00D7, 0x010D,
+	0x00E1, 0x00ED, 0x00F3, 0x00FA, 0x0104, 0x0105, 0x017D, 0x017E,
+	0x0118, 0x0119, 0x00AC, 0x017A, 0x010C, 0x015F, 0x00AB, 0x00BB,
+	0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x00C1, 0x00C2, 0x011A,
+	0x015E, 0x2563, 0x2551, 0x2557, 0x255D, 0x017B, 0x017C, 0x2510,
+	0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x0102, 0x0103,
+	0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x00A4,
+	0x0111, 0x0110, 0x010E, 0x00CB, 0x010F, 0x0147, 0x00CD, 0x00CE,
+	0x011B, 0x2518, 0x250C, 0x2588, 0x2584, 0x0162, 0x016E, 0x2580,
+	0x00D3, 0x00DF, 0x00D4, 0x0143, 0x0144, 0x0148, 0x0160, 0x0161,
+	0x0154, 0x00DA, 0x0155, 0x0170, 0x00FD, 0x00DD, 0x0163, 0x00B4,
+	0x00AD, 0x02DD, 0x02DB, 0x02C7, 0x02D8, 0x00A7, 0x00F7, 0x00B8,
+	0x00B0, 0x00A8, 0x02D9, 0x0171, 0x0158, 0x0159, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 855
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP855(0x80-0xFF) to Unicode conversion table */
+	0x0452, 0x0402, 0x0453, 0x0403, 0x0451, 0x0401, 0x0454, 0x0404,
+	0x0455, 0x0405, 0x0456, 0x0406, 0x0457, 0x0407, 0x0458, 0x0408,
+	0x0459, 0x0409, 0x045A, 0x040A, 0x045B, 0x040B, 0x045C, 0x040C,
+	0x045E, 0x040E, 0x045F, 0x040F, 0x044E, 0x042E, 0x044A, 0x042A,
+	0x0430, 0x0410, 0x0431, 0x0411, 0x0446, 0x0426, 0x0434, 0x0414,
+	0x0435, 0x0415, 0x0444, 0x0424, 0x0433, 0x0413, 0x00AB, 0x00BB,
+	0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x0445, 0x0425, 0x0438,
+	0x0418, 0x2563, 0x2551, 0x2557, 0x255D, 0x0439, 0x0419, 0x2510,
+	0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x043A, 0x041A,
+	0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x00A4,
+	0x043B, 0x041B, 0x043C, 0x041C, 0x043D, 0x041D, 0x043E, 0x041E,
+	0x043F, 0x2518, 0x250C, 0x2588, 0x2584, 0x041F, 0x044F, 0x2580,
+	0x042F, 0x0440, 0x0420, 0x0441, 0x0421, 0x0442, 0x0422, 0x0443,
+	0x0423, 0x0436, 0x0416, 0x0432, 0x0412, 0x044C, 0x042C, 0x2116,
+	0x00AD, 0x044B, 0x042B, 0x0437, 0x0417, 0x0448, 0x0428, 0x044D,
+	0x042D, 0x0449, 0x0429, 0x0447, 0x0427, 0x00A7, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 857
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP857(0x80-0xFF) to Unicode conversion table */
+	0x00C7, 0x00FC, 0x00E9, 0x00E2, 0x00E4, 0x00E0, 0x00E5, 0x00E7,
+	0x00EA, 0x00EB, 0x00E8, 0x00EF, 0x00EE, 0x0131, 0x00C4, 0x00C5,
+	0x00C9, 0x00E6, 0x00C6, 0x00F4, 0x00F6, 0x00F2, 0x00FB, 0x00F9,
+	0x0130, 0x00D6, 0x00DC, 0x00F8, 0x00A3, 0x00D8, 0x015E, 0x015F,
+	0x00E1, 0x00ED, 0x00F3, 0x00FA, 0x00F1, 0x00D1, 0x011E, 0x011F,
+	0x00BF, 0x00AE, 0x00AC, 0x00BD, 0x00BC, 0x00A1, 0x00AB, 0x00BB,
+	0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x00C1, 0x00C2, 0x00C0,
+	0x00A9, 0x2563, 0x2551, 0x2557, 0x255D, 0x00A2, 0x00A5, 0x2510,
+	0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x00E3, 0x00C3,
+	0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x00A4,
+	0x00BA, 0x00AA, 0x00CA, 0x00CB, 0x00C8, 0x0000, 0x00CD, 0x00CE,
+	0x00CF, 0x2518, 0x250C, 0x2588, 0x2584, 0x00A6, 0x00CC, 0x2580,
+	0x00D3, 0x00DF, 0x00D4, 0x00D2, 0x00F5, 0x00D5, 0x00B5, 0x0000,
+	0x00D7, 0x00DA, 0x00DB, 0x00D9, 0x00EC, 0x00FF, 0x00AF, 0x00B4,
+	0x00AD, 0x00B1, 0x0000, 0x00BE, 0x00B6, 0x00A7, 0x00F7, 0x00B8,
+	0x00B0, 0x00A8, 0x00B7, 0x00B9, 0x00B3, 0x00B2, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 858
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP858(0x80-0xFF) to Unicode conversion table */
+	0x00C7, 0x00FC, 0x00E9, 0x00E2, 0x00E4, 0x00E0, 0x00E5, 0x00E7,
+	0x00EA, 0x00EB, 0x00E8, 0x00EF, 0x00EE, 0x00EC, 0x00C4, 0x00C5,
+	0x00C9, 0x00E6, 0x00C6, 0x00F4, 0x00F6, 0x00F2, 0x00FB, 0x00F9,
+	0x00FF, 0x00D6, 0x00DC, 0x00F8, 0x00A3, 0x00D8, 0x00D7, 0x0192,
+	0x00E1, 0x00ED, 0x00F3, 0x00FA, 0x00F1, 0x00D1, 0x00AA, 0x00BA,
+	0x00BF, 0x00AE, 0x00AC, 0x00BD, 0x00BC, 0x00A1, 0x00AB, 0x00BB,
+	0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x00C1, 0x00C2, 0x00C0,
+	0x00A9, 0x2563, 0x2551, 0x2557, 0x2550, 0x00A2, 0x00A5, 0x2510,
+	0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x00E3, 0x00C3,
+	0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x00A4,
+	0x00F0, 0x00D0, 0x00CA, 0x00CB, 0x00C8, 0x20AC, 0x00CD, 0x00CE,
+	0x00CF, 0x2518, 0x250C, 0x2588, 0x2584, 0x00C6, 0x00CC, 0x2580,
+	0x00D3, 0x00DF, 0x00D4, 0x00D2, 0x00F5, 0x00D5, 0x00B5, 0x00FE,
+	0x00DE, 0x00DA, 0x00DB, 0x00D9, 0x00FD, 0x00DD, 0x00AF, 0x00B4,
+	0x00AD, 0x00B1, 0x2017, 0x00BE, 0x00B6, 0x00A7, 0x00F7, 0x00B8,
+	0x00B0, 0x00A8, 0x00B7, 0x00B9, 0x00B3, 0x00B2, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 862
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP862(0x80-0xFF) to Unicode conversion table */
+	0x05D0, 0x05D1, 0x05D2, 0x05D3, 0x05D4, 0x05D5, 0x05D6, 0x05D7,
+	0x05D8, 0x05D9, 0x05DA, 0x05DB, 0x05DC, 0x05DD, 0x05DE, 0x05DF,
+	0x05E0, 0x05E1, 0x05E2, 0x05E3, 0x05E4, 0x05E5, 0x05E6, 0x05E7,
+	0x05E8, 0x05E9, 0x05EA, 0x00A2, 0x00A3, 0x00A5, 0x20A7, 0x0192,
+	0x00E1, 0x00ED, 0x00F3, 0x00FA, 0x00F1, 0x00D1, 0x00AA, 0x00BA,
+	0x00BF, 0x2310, 0x00AC, 0x00BD, 0x00BC, 0x00A1, 0x00AB, 0x00BB,
+	0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556,
+	0x2555, 0x2563, 0x2551, 0x2557, 0x255D, 0x255C, 0x255B, 0x2510,
+	0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x255E, 0x255F,
+	0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x2567,
+	0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256B,
+	0x256A, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580,
+	0x03B1, 0x00DF, 0x0393, 0x03C0, 0x03A3, 0x03C3, 0x00B5, 0x03C4,
+	0x03A6, 0x0398, 0x03A9, 0x03B4, 0x221E, 0x03C6, 0x03B5, 0x2229,
+	0x2261, 0x00B1, 0x2265, 0x2264, 0x2320, 0x2321, 0x00F7, 0x2248,
+	0x00B0, 0x2219, 0x00B7, 0x221A, 0x207F, 0x00B2, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 866
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP866(0x80-0xFF) to Unicode conversion table */
+	0x0410, 0x0411, 0x0412, 0x0413, 0x0414, 0x0415, 0x0416, 0x0417,
+	0x0418, 0x0419, 0x041A, 0x041B, 0x041C, 0x041D, 0x041E, 0x041F,
+	0x0420, 0x0421, 0x0422, 0x0423, 0x0424, 0x0425, 0x0426, 0x0427,
+	0x0428, 0x0429, 0x042A, 0x042B, 0x042C, 0x042D, 0x042E, 0x042F,
+	0x0430, 0x0431, 0x0432, 0x0433, 0x0434, 0x0435, 0x0436, 0x0437,
+	0x0438, 0x0439, 0x043A, 0x043B, 0x043C, 0x043D, 0x043E, 0x043F,
+	0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556,
+	0x2555, 0x2563, 0x2551, 0x2557, 0x255D, 0x255C, 0x255B, 0x2510,
+	0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x255E, 0x255F,
+	0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x2567,
+	0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256B,
+	0x256A, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580,
+	0x0440, 0x0441, 0x0442, 0x0443, 0x0444, 0x0445, 0x0446, 0x0447,
+	0x0448, 0x0449, 0x044A, 0x044B, 0x044C, 0x044D, 0x044E, 0x044F,
+	0x0401, 0x0451, 0x0404, 0x0454, 0x0407, 0x0457, 0x040E, 0x045E,
+	0x00B0, 0x2219, 0x00B7, 0x221A, 0x2116, 0x00A4, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 874
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP874(0x80-0xFF) to Unicode conversion table */
+	0x20AC, 0x0000, 0x0000, 0x0000, 0x0000, 0x2026, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x2018, 0x2019, 0x201C, 0x201D, 0x2022, 0x2013, 0x2014,
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+	0x00A0, 0x0E01, 0x0E02, 0x0E03, 0x0E04, 0x0E05, 0x0E06, 0x0E07,
+	0x0E08, 0x0E09, 0x0E0A, 0x0E0B, 0x0E0C, 0x0E0D, 0x0E0E, 0x0E0F,
+	0x0E10, 0x0E11, 0x0E12, 0x0E13, 0x0E14, 0x0E15, 0x0E16, 0x0E17,
+	0x0E18, 0x0E19, 0x0E1A, 0x0E1B, 0x0E1C, 0x0E1D, 0x0E1E, 0x0E1F,
+	0x0E20, 0x0E21, 0x0E22, 0x0E23, 0x0E24, 0x0E25, 0x0E26, 0x0E27,
+	0x0E28, 0x0E29, 0x0E2A, 0x0E2B, 0x0E2C, 0x0E2D, 0x0E2E, 0x0E2F,
+	0x0E30, 0x0E31, 0x0E32, 0x0E33, 0x0E34, 0x0E35, 0x0E36, 0x0E37,
+	0x0E38, 0x0E39, 0x0E3A, 0x0000, 0x0000, 0x0000, 0x0000, 0x0E3F,
+	0x0E40, 0x0E41, 0x0E42, 0x0E43, 0x0E44, 0x0E45, 0x0E46, 0x0E47,
+	0x0E48, 0x0E49, 0x0E4A, 0x0E4B, 0x0E4C, 0x0E4D, 0x0E4E, 0x0E4F,
+	0x0E50, 0x0E51, 0x0E52, 0x0E53, 0x0E54, 0x0E55, 0x0E56, 0x0E57,
+	0x0E58, 0x0E59, 0x0E5A, 0x0E5B, 0x0000, 0x0000, 0x0000, 0x0000
+};
+
+#elif _CODE_PAGE == 1250
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP1250(0x80-0xFF) to Unicode conversion table */
+	0x20AC, 0x0000, 0x201A, 0x0000, 0x201E, 0x2026, 0x2020, 0x2021,
+	0x0000, 0x2030, 0x0160, 0x2039, 0x015A, 0x0164, 0x017D, 0x0179,
+	0x0000, 0x2018, 0x2019, 0x201C, 0x201D, 0x2022, 0x2013, 0x2014,
+	0x0000, 0x2122, 0x0161, 0x203A, 0x015B, 0x0165, 0x017E, 0x017A,
+	0x00A0, 0x02C7, 0x02D8, 0x0141, 0x00A4, 0x0104, 0x00A6, 0x00A7,
+	0x00A8, 0x00A9, 0x015E, 0x00AB, 0x00AC, 0x00AD, 0x00AE, 0x017B,
+	0x00B0, 0x00B1, 0x02DB, 0x0142, 0x00B4, 0x00B5, 0x00B6, 0x00B7,
+	0x00B8, 0x0105, 0x015F, 0x00BB, 0x013D, 0x02DD, 0x013E, 0x017C,
+	0x0154, 0x00C1, 0x00C2, 0x0102, 0x00C4, 0x0139, 0x0106, 0x00C7,
+	0x010C, 0x00C9, 0x0118, 0x00CB, 0x011A, 0x00CD, 0x00CE, 0x010E,
+	0x0110, 0x0143, 0x0147, 0x00D3, 0x00D4, 0x0150, 0x00D6, 0x00D7,
+	0x0158, 0x016E, 0x00DA, 0x0170, 0x00DC, 0x00DD, 0x0162, 0x00DF,
+	0x0155, 0x00E1, 0x00E2, 0x0103, 0x00E4, 0x013A, 0x0107, 0x00E7,
+	0x010D, 0x00E9, 0x0119, 0x00EB, 0x011B, 0x00ED, 0x00EE, 0x010F,
+	0x0111, 0x0144, 0x0148, 0x00F3, 0x00F4, 0x0151, 0x00F6, 0x00F7,
+	0x0159, 0x016F, 0x00FA, 0x0171, 0x00FC, 0x00FD, 0x0163, 0x02D9
+};
+
+#elif _CODE_PAGE == 1251
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP1251(0x80-0xFF) to Unicode conversion table */
+	0x0402, 0x0403, 0x201A, 0x0453, 0x201E, 0x2026, 0x2020, 0x2021,
+	0x20AC, 0x2030, 0x0409, 0x2039, 0x040A, 0x040C, 0x040B, 0x040F,
+	0x0452, 0x2018, 0x2019, 0x201C, 0x201D, 0x2022, 0x2013, 0x2014,
+	0x0000, 0x2111, 0x0459, 0x203A, 0x045A, 0x045C, 0x045B, 0x045F,
+	0x00A0, 0x040E, 0x045E, 0x0408, 0x00A4, 0x0490, 0x00A6, 0x00A7,
+	0x0401, 0x00A9, 0x0404, 0x00AB, 0x00AC, 0x00AD, 0x00AE, 0x0407,
+	0x00B0, 0x00B1, 0x0406, 0x0456, 0x0491, 0x00B5, 0x00B6, 0x00B7,
+	0x0451, 0x2116, 0x0454, 0x00BB, 0x0458, 0x0405, 0x0455, 0x0457,
+	0x0410, 0x0411, 0x0412, 0x0413, 0x0414, 0x0415, 0x0416, 0x0417,
+	0x0418, 0x0419, 0x041A, 0x041B, 0x041C, 0x041D, 0x041E, 0x041F,
+	0x0420, 0x0421, 0x0422, 0x0423, 0x0424, 0x0425, 0x0426, 0x0427,
+	0x0428, 0x0429, 0x042A, 0x042B, 0x042C, 0x042D, 0x042E, 0x042F,
+	0x0430, 0x0431, 0x0432, 0x0433, 0x0434, 0x0435, 0x0436, 0x0437,
+	0x0438, 0x0439, 0x043A, 0x043B, 0x043C, 0x043D, 0x043E, 0x043F,
+	0x0440, 0x0441, 0x0442, 0x0443, 0x0444, 0x0445, 0x0446, 0x0447,
+	0x0448, 0x0449, 0x044A, 0x044B, 0x044C, 0x044D, 0x044E, 0x044F
+};
+
+#elif _CODE_PAGE == 1252
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP1252(0x80-0xFF) to Unicode conversion table */
+	0x20AC, 0x0000, 0x201A, 0x0192, 0x201E, 0x2026, 0x2020, 0x2021,
+	0x02C6, 0x2030, 0x0160, 0x2039, 0x0152, 0x0000, 0x017D, 0x0000,
+	0x0000, 0x2018, 0x2019, 0x201C, 0x201D, 0x2022, 0x2013, 0x2014,
+	0x02DC, 0x2122, 0x0161, 0x203A, 0x0153, 0x0000, 0x017E, 0x0178,
+	0x00A0, 0x00A1, 0x00A2, 0x00A3, 0x00A4, 0x00A5, 0x00A6, 0x00A7,
+	0x00A8, 0x00A9, 0x00AA, 0x00AB, 0x00AC, 0x00AD, 0x00AE, 0x00AF,
+	0x00B0, 0x00B1, 0x00B2, 0x00B3, 0x00B4, 0x00B5, 0x00B6, 0x00B7,
+	0x00B8, 0x00B9, 0x00BA, 0x00BB, 0x00BC, 0x00BD, 0x00BE, 0x00BF,
+	0x00C0, 0x00C1, 0x00C2, 0x00C3, 0x00C4, 0x00C5, 0x00C6, 0x00C7,
+	0x00C8, 0x00C9, 0x00CA, 0x00CB, 0x00CC, 0x00CD, 0x00CE, 0x00CF,
+	0x00D0, 0x00D1, 0x00D2, 0x00D3, 0x00D4, 0x00D5, 0x00D6, 0x00D7,
+	0x00D8, 0x00D9, 0x00DA, 0x00DB, 0x00DC, 0x00DD, 0x00DE, 0x00DF,
+	0x00E0, 0x00E1, 0x00E2, 0x00E3, 0x00E4, 0x00E5, 0x00E6, 0x00E7,
+	0x00E8, 0x00E9, 0x00EA, 0x00EB, 0x00EC, 0x00ED, 0x00EE, 0x00EF,
+	0x00F0, 0x00F1, 0x00F2, 0x00F3, 0x00F4, 0x00F5, 0x00F6, 0x00F7,
+	0x00F8, 0x00F9, 0x00FA, 0x00FB, 0x00FC, 0x00FD, 0x00FE, 0x00FF
+};
+
+#elif _CODE_PAGE == 1253
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP1253(0x80-0xFF) to Unicode conversion table */
+	0x20AC, 0x0000, 0x201A, 0x0192, 0x201E, 0x2026, 0x2020, 0x2021,
+	0x0000, 0x2030, 0x0000, 0x2039, 0x000C, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x2018, 0x2019, 0x201C, 0x201D, 0x2022, 0x2013, 0x2014,
+	0x0000, 0x2122, 0x0000, 0x203A, 0x0000, 0x0000, 0x0000, 0x0000,
+	0x00A0, 0x0385, 0x0386, 0x00A3, 0x00A4, 0x00A5, 0x00A6, 0x00A7,
+	0x00A8, 0x00A9, 0x0000, 0x00AB, 0x00AC, 0x00AD, 0x00AE, 0x2015,
+	0x00B0, 0x00B1, 0x00B2, 0x00B3, 0x0384, 0x00B5, 0x00B6, 0x00B7,
+	0x0388, 0x0389, 0x038A, 0x00BB, 0x038C, 0x00BD, 0x038E, 0x038F,
+	0x0390, 0x0391, 0x0392, 0x0393, 0x0394, 0x0395, 0x0396, 0x0397,
+	0x0398, 0x0399, 0x039A, 0x039B, 0x039C, 0x039D, 0x039E, 0x039F,
+	0x03A0, 0x03A1, 0x0000, 0x03A3, 0x03A4, 0x03A5, 0x03A6, 0x03A7,
+	0x03A8, 0x03A9, 0x03AA, 0x03AD, 0x03AC, 0x03AD, 0x03AE, 0x03AF,
+	0x03B0, 0x03B1, 0x03B2, 0x03B3, 0x03B4, 0x03B5, 0x03B6, 0x03B7,
+	0x03B8, 0x03B9, 0x03BA, 0x03BB, 0x03BC, 0x03BD, 0x03BE, 0x03BF,
+	0x03C0, 0x03C1, 0x03C2, 0x03C3, 0x03C4, 0x03C5, 0x03C6, 0x03C7,
+	0x03C8, 0x03C9, 0x03CA, 0x03CB, 0x03CC, 0x03CD, 0x03CE, 0x0000
+};
+
+#elif _CODE_PAGE == 1254
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP1254(0x80-0xFF) to Unicode conversion table */
+	0x20AC, 0x0000, 0x210A, 0x0192, 0x201E, 0x2026, 0x2020, 0x2021,
+	0x02C6, 0x2030, 0x0160, 0x2039, 0x0152, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x2018, 0x2019, 0x201C, 0x201D, 0x2022, 0x2013, 0x2014,
+	0x02DC, 0x2122, 0x0161, 0x203A, 0x0153, 0x0000, 0x0000, 0x0178,
+	0x00A0, 0x00A1, 0x00A2, 0x00A3, 0x00A4, 0x00A5, 0x00A6, 0x00A7,
+	0x00A8, 0x00A9, 0x00AA, 0x00AB, 0x00AC, 0x00AD, 0x00AE, 0x00AF,
+	0x00B0, 0x00B1, 0x00B2, 0x00B3, 0x00B4, 0x00B5, 0x00B6, 0x00B7,
+	0x00B8, 0x00B9, 0x00BA, 0x00BB, 0x00BC, 0x00BD, 0x00BE, 0x00BF,
+	0x00C0, 0x00C1, 0x00C2, 0x00C3, 0x00C4, 0x00C5, 0x00C6, 0x00C7,
+	0x00C8, 0x00C9, 0x00CA, 0x00CB, 0x00CC, 0x00CD, 0x00CE, 0x00CF,
+	0x011E, 0x00D1, 0x00D2, 0x00D3, 0x00D4, 0x00D5, 0x00D6, 0x00D7,
+	0x00D8, 0x00D9, 0x00DA, 0x00BD, 0x00DC, 0x0130, 0x015E, 0x00DF,
+	0x00E0, 0x00E1, 0x00E2, 0x00E3, 0x00E4, 0x00E5, 0x00E6, 0x00E7,
+	0x00E8, 0x00E9, 0x00EA, 0x00EB, 0x00EC, 0x00ED, 0x00EE, 0x00EF,
+	0x011F, 0x00F1, 0x00F2, 0x00F3, 0x00F4, 0x00F5, 0x00F6, 0x00F7,
+	0x00F8, 0x00F9, 0x00FA, 0x00FB, 0x00FC, 0x0131, 0x015F, 0x00FF
+};
+
+#elif _CODE_PAGE == 1255
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP1255(0x80-0xFF) to Unicode conversion table */
+	0x20AC, 0x0000, 0x201A, 0x0192, 0x201E, 0x2026, 0x2020, 0x2021,
+	0x02C6, 0x2030, 0x0000, 0x2039, 0x0000, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x2018, 0x2019, 0x201C, 0x201D, 0x2022, 0x2013, 0x2014,
+	0x02DC, 0x2122, 0x0000, 0x203A, 0x0000, 0x0000, 0x0000, 0x0000,
+	0x00A0, 0x00A1, 0x00A2, 0x00A3, 0x00A4, 0x00A5, 0x00A6, 0x00A7,
+	0x00A8, 0x00A9, 0x00D7, 0x00AB, 0x00AC, 0x00AD, 0x00AE, 0x00AF,
+	0x00B0, 0x00B1, 0x00B2, 0x00B3, 0x00B4, 0x00B5, 0x00B6, 0x00B7,
+	0x00B8, 0x00B9, 0x00F7, 0x00BB, 0x00BC, 0x00BD, 0x00BE, 0x00BF,
+	0x05B0, 0x05B1, 0x05B2, 0x05B3, 0x05B4, 0x05B5, 0x05B6, 0x05B7,
+	0x05B8, 0x05B9, 0x0000, 0x05BB, 0x05BC, 0x05BD, 0x05BE, 0x05BF,
+	0x05C0, 0x05C1, 0x05C2, 0x05C3, 0x05F0, 0x05F1, 0x05F2, 0x05F3,
+	0x05F4, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+	0x05D0, 0x05D1, 0x05D2, 0x05D3, 0x05D4, 0x05D5, 0x05D6, 0x05D7,
+	0x05D8, 0x05D9, 0x05DA, 0x05DB, 0x05DC, 0x05DD, 0x05DE, 0x05DF,
+	0x05E0, 0x05E1, 0x05E2, 0x05E3, 0x05E4, 0x05E5, 0x05E6, 0x05E7,
+	0x05E8, 0x05E9, 0x05EA, 0x0000, 0x0000, 0x200E, 0x200F, 0x0000
+};
+
+#elif _CODE_PAGE == 1256
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP1256(0x80-0xFF) to Unicode conversion table */
+	0x20AC, 0x067E, 0x201A, 0x0192, 0x201E, 0x2026, 0x2020, 0x2021,
+	0x02C6, 0x2030, 0x0679, 0x2039, 0x0152, 0x0686, 0x0698, 0x0688,
+	0x06AF, 0x2018, 0x2019, 0x201C, 0x201D, 0x2022, 0x2013, 0x2014,
+	0x06A9, 0x2122, 0x0691, 0x203A, 0x0153, 0x200C, 0x200D, 0x06BA,
+	0x00A0, 0x060C, 0x00A2, 0x00A3, 0x00A4, 0x00A5, 0x00A6, 0x00A7,
+	0x00A8, 0x00A9, 0x06BE, 0x00AB, 0x00AC, 0x00AD, 0x00AE, 0x00AF,
+	0x00B0, 0x00B1, 0x00B2, 0x00B3, 0x00B4, 0x00B5, 0x00B6, 0x00B7,
+	0x00B8, 0x00B9, 0x061B, 0x00BB, 0x00BC, 0x00BD, 0x00BE, 0x061F,
+	0x06C1, 0x0621, 0x0622, 0x0623, 0x0624, 0x0625, 0x0626, 0x0627,
+	0x0628, 0x0629, 0x062A, 0x062B, 0x062C, 0x062D, 0x062E, 0x062F,
+	0x0630, 0x0631, 0x0632, 0x0633, 0x0634, 0x0635, 0x0636, 0x00D7,
+	0x0637, 0x0638, 0x0639, 0x063A, 0x0640, 0x0640, 0x0642, 0x0643,
+	0x00E0, 0x0644, 0x00E2, 0x0645, 0x0646, 0x0647, 0x0648, 0x00E7,
+	0x00E8, 0x00E9, 0x00EA, 0x00EB, 0x0649, 0x064A, 0x00EE, 0x00EF,
+	0x064B, 0x064C, 0x064D, 0x064E, 0x00F4, 0x064F, 0x0650, 0x00F7,
+	0x0651, 0x00F9, 0x0652, 0x00FB, 0x00FC, 0x200E, 0x200F, 0x06D2
+}
+
+#elif _CODE_PAGE == 1257
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP1257(0x80-0xFF) to Unicode conversion table */
+	0x20AC, 0x0000, 0x201A, 0x0000, 0x201E, 0x2026, 0x2020, 0x2021,
+	0x0000, 0x2030, 0x0000, 0x2039, 0x0000, 0x00A8, 0x02C7, 0x00B8,
+	0x0000, 0x2018, 0x2019, 0x201C, 0x201D, 0x2022, 0x2013, 0x2014,
+	0x0000, 0x2122, 0x0000, 0x203A, 0x0000, 0x00AF, 0x02DB, 0x0000,
+	0x00A0, 0x0000, 0x00A2, 0x00A3, 0x00A4, 0x0000, 0x00A6, 0x00A7,
+	0x00D8, 0x00A9, 0x0156, 0x00AB, 0x00AC, 0x00AD, 0x00AE, 0x00AF,
+	0x00B0, 0x00B1, 0x00B2, 0x00B3, 0x00B4, 0x00B5, 0x00B6, 0x00B7,
+	0x00B8, 0x00B9, 0x0157, 0x00BB, 0x00BC, 0x00BD, 0x00BE, 0x00E6,
+	0x0104, 0x012E, 0x0100, 0x0106, 0x00C4, 0x00C5, 0x0118, 0x0112,
+	0x010C, 0x00C9, 0x0179, 0x0116, 0x0122, 0x0136, 0x012A, 0x013B,
+	0x0160, 0x0143, 0x0145, 0x00D3, 0x014C, 0x00D5, 0x00D6, 0x00D7,
+	0x0172, 0x0141, 0x015A, 0x016A, 0x00DC, 0x017B, 0x017D, 0x00DF,
+	0x0105, 0x012F, 0x0101, 0x0107, 0x00E4, 0x00E5, 0x0119, 0x0113,
+	0x010D, 0x00E9, 0x017A, 0x0117, 0x0123, 0x0137, 0x012B, 0x013C,
+	0x0161, 0x0144, 0x0146, 0x00F3, 0x014D, 0x00F5, 0x00F6, 0x00F7,
+	0x0173, 0x014E, 0x015B, 0x016B, 0x00FC, 0x017C, 0x017E, 0x02D9
+};
+
+#elif _CODE_PAGE == 1258
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = {	/*  CP1258(0x80-0xFF) to Unicode conversion table */
+	0x20AC, 0x0000, 0x201A, 0x0192, 0x201E, 0x2026, 0x2020, 0x2021,
+	0x02C6, 0x2030, 0x0000, 0x2039, 0x0152, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x2018, 0x2019, 0x201C, 0x201D, 0x2022, 0x2013, 0x2014,
+	0x02DC, 0x2122, 0x0000, 0x203A, 0x0153, 0x0000, 0x0000, 0x0178,
+	0x00A0, 0x00A1, 0x00A2, 0x00A3, 0x00A4, 0x00A5, 0x00A6, 0x00A7,
+	0x00A8, 0x00A9, 0x00AA, 0x00AB, 0x00AC, 0x00AD, 0x00AE, 0x00AF,
+	0x00B0, 0x00B1, 0x00B2, 0x00B3, 0x00B4, 0x00B5, 0x00B6, 0x00B7,
+	0x00B8, 0x00B9, 0x00BA, 0x00BB, 0x00BC, 0x00BD, 0x00BE, 0x00BF,
+	0x00C0, 0x00C1, 0x00C2, 0x0102, 0x00C4, 0x00C5, 0x00C6, 0x00C7,
+	0x00C8, 0x00C9, 0x00CA, 0x00CB, 0x0300, 0x00CD, 0x00CE, 0x00CF,
+	0x0110, 0x00D1, 0x0309, 0x00D3, 0x00D4, 0x01A0, 0x00D6, 0x00D7,
+	0x00D8, 0x00D9, 0x00DA, 0x00DB, 0x00DC, 0x01AF, 0x0303, 0x00DF,
+	0x00E0, 0x00E1, 0x00E2, 0x0103, 0x00E4, 0x00E5, 0x00E6, 0x00E7,
+	0x00E8, 0x00E9, 0x00EA, 0x00EB, 0x0301, 0x00ED, 0x00EE, 0x00EF,
+	0x0111, 0x00F1, 0x0323, 0x00F3, 0x00F4, 0x01A1, 0x00F6, 0x00F7,
+	0x00F8, 0x00F9, 0x00FA, 0x00FB, 0x00FC, 0x01B0, 0x20AB, 0x00FF
+};
+
+#endif
+
+
+#if !_TBLDEF || !_USE_LFN
+#error This file is not needed in current configuration. Remove from the project.
+#endif
+
+
+WCHAR ff_convert (	/* Converted character, Returns zero on error */
+	WCHAR	src,	/* Character code to be converted */
+	UINT	dir		/* 0: Unicode to OEMCP, 1: OEMCP to Unicode */
+)
+{
+	WCHAR c;
+
+
+	if (src < 0x80) {	/* ASCII */
+		c = src;
+
+	} else {
+		if (dir) {		/* OEMCP to Unicode */
+			c = (src >= 0x100) ? 0 : Tbl[src - 0x80];
+
+		} else {		/* Unicode to OEMCP */
+			for (c = 0; c < 0x80; c++) {
+				if (src == Tbl[c]) break;
+			}
+			c = (c + 0x80) & 0xFF;
+		}
+	}
+
+	return c;
+}
+
+
+WCHAR ff_wtoupper (	/* Upper converted character */
+	WCHAR chr		/* Input character */
+)
+{
+	static const WCHAR tbl_lower[] = { 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x6F, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7A, 0xA1, 0x00A2, 0x00A3, 0x00A5, 0x00AC, 0x00AF, 0xE0, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, 0xE8, 0xE9, 0xEA, 0xEB, 0xEC, 0xED, 0xEE, 0xEF, 0xF0, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF8, 0xF9, 0xFA, 0xFB, 0xFC, 0xFD, 0xFE, 0x0FF, 0x101, 0x103, 0x105, 0x107, 0x109, 0x10B, 0x10D, 0x10F, 0x111, 0x113, 0x115, 0x117, 0x119, 0x11B, 0x11D, 0x11F, 0x121, 0x123, 0x125, 0x127, 0x129, 0x12B, 0x12D, 0x12F, 0x131, 0x133, 0x135, 0x137, 0x13A, 0x13C, 0x13E, 0x140, 0x142, 0x144, 0x146, 0x148, 0x14B, 0x14D, 0x14F, 0x151, 0x153, 0x155, 0x157, 0x159, 0x15B, 0x15D, 0x15F, 0x161, 0x163, 0x165, 0x167, 0x169, 0x16B, 0x16D, 0x16F, 0x171, 0x173, 0x175, 0x177, 0x17A, 0x17C, 0x17E, 0x192, 0x3B1, 0x3B2, 0x3B3, 0x3B4, 0x3B5, 0x3B6, 0x3B7, 0x3B8, 0x3B9, 0x3BA, 0x3BB, 0x3BC, 0x3BD, 0x3BE, 0x3BF, 0x3C0, 0x3C1, 0x3C3, 0x3C4, 0x3C5, 0x3C6, 0x3C7, 0x3C8, 0x3C9, 0x3CA, 0x430, 0x431, 0x432, 0x433, 0x434, 0x435, 0x436, 0x437, 0x438, 0x439, 0x43A, 0x43B, 0x43C, 0x43D, 0x43E, 0x43F, 0x440, 0x441, 0x442, 0x443, 0x444, 0x445, 0x446, 0x447, 0x448, 0x449, 0x44A, 0x44B, 0x44C, 0x44D, 0x44E, 0x44F, 0x451, 0x452, 0x453, 0x454, 0x455, 0x456, 0x457, 0x458, 0x459, 0x45A, 0x45B, 0x45C, 0x45E, 0x45F, 0x2170, 0x2171, 0x2172, 0x2173, 0x2174, 0x2175, 0x2176, 0x2177, 0x2178, 0x2179, 0x217A, 0x217B, 0x217C, 0x217D, 0x217E, 0x217F, 0xFF41, 0xFF42, 0xFF43, 0xFF44, 0xFF45, 0xFF46, 0xFF47, 0xFF48, 0xFF49, 0xFF4A, 0xFF4B, 0xFF4C, 0xFF4D, 0xFF4E, 0xFF4F, 0xFF50, 0xFF51, 0xFF52, 0xFF53, 0xFF54, 0xFF55, 0xFF56, 0xFF57, 0xFF58, 0xFF59, 0xFF5A, 0 };
+	static const WCHAR tbl_upper[] = { 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, 0x5A, 0x21, 0xFFE0, 0xFFE1, 0xFFE5, 0xFFE2, 0xFFE3, 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD8, 0xD9, 0xDA, 0xDB, 0xDC, 0xDD, 0xDE, 0x178, 0x100, 0x102, 0x104, 0x106, 0x108, 0x10A, 0x10C, 0x10E, 0x110, 0x112, 0x114, 0x116, 0x118, 0x11A, 0x11C, 0x11E, 0x120, 0x122, 0x124, 0x126, 0x128, 0x12A, 0x12C, 0x12E, 0x130, 0x132, 0x134, 0x136, 0x139, 0x13B, 0x13D, 0x13F, 0x141, 0x143, 0x145, 0x147, 0x14A, 0x14C, 0x14E, 0x150, 0x152, 0x154, 0x156, 0x158, 0x15A, 0x15C, 0x15E, 0x160, 0x162, 0x164, 0x166, 0x168, 0x16A, 0x16C, 0x16E, 0x170, 0x172, 0x174, 0x176, 0x179, 0x17B, 0x17D, 0x191, 0x391, 0x392, 0x393, 0x394, 0x395, 0x396, 0x397, 0x398, 0x399, 0x39A, 0x39B, 0x39C, 0x39D, 0x39E, 0x39F, 0x3A0, 0x3A1, 0x3A3, 0x3A4, 0x3A5, 0x3A6, 0x3A7, 0x3A8, 0x3A9, 0x3AA, 0x410, 0x411, 0x412, 0x413, 0x414, 0x415, 0x416, 0x417, 0x418, 0x419, 0x41A, 0x41B, 0x41C, 0x41D, 0x41E, 0x41F, 0x420, 0x421, 0x422, 0x423, 0x424, 0x425, 0x426, 0x427, 0x428, 0x429, 0x42A, 0x42B, 0x42C, 0x42D, 0x42E, 0x42F, 0x401, 0x402, 0x403, 0x404, 0x405, 0x406, 0x407, 0x408, 0x409, 0x40A, 0x40B, 0x40C, 0x40E, 0x40F, 0x2160, 0x2161, 0x2162, 0x2163, 0x2164, 0x2165, 0x2166, 0x2167, 0x2168, 0x2169, 0x216A, 0x216B, 0x216C, 0x216D, 0x216E, 0x216F, 0xFF21, 0xFF22, 0xFF23, 0xFF24, 0xFF25, 0xFF26, 0xFF27, 0xFF28, 0xFF29, 0xFF2A, 0xFF2B, 0xFF2C, 0xFF2D, 0xFF2E, 0xFF2F, 0xFF30, 0xFF31, 0xFF32, 0xFF33, 0xFF34, 0xFF35, 0xFF36, 0xFF37, 0xFF38, 0xFF39, 0xFF3A, 0 };
+	int i;
+
+
+	for (i = 0; tbl_lower[i] && chr != tbl_lower[i]; i++) ;
+
+	return tbl_lower[i] ? tbl_upper[i] : chr;
+}

src/tests/cic.c

@@ -0,0 +1,76 @@
+#include <arm/NXP/LPC17xx/LPC17xx.h>
+#include "bits.h"
+#include "config.h"
+#include "uart.h"
+#include "cic.h"
+
+char *cicstatenames[4] = { "CIC_OK", "CIC_FAIL", "CIC_PAIR", "CIC_SCIC" };
+
+void print_cic_state() {
+  printf("CIC state: %s\n", get_cic_statename(get_cic_state()));
+}
+
+inline char *get_cic_statename(enum cicstates state) {
+  return cicstatenames[state];
+}
+
+enum cicstates get_cic_state() {
+  uint32_t count;
+  uint32_t togglecount = 0;
+  uint8_t state, state_old;
+
+  state_old = BITBAND(SNES_CIC_STATUS_REG->FIOPIN, SNES_CIC_STATUS_BIT);
+/* this loop samples at ~10MHz */
+  for(count=0; count<CIC_SAMPLECOUNT; count++) {
+    state = BITBAND(SNES_CIC_STATUS_REG->FIOPIN, SNES_CIC_STATUS_BIT);
+    if(state != state_old) {
+      togglecount++;
+    }
+    state_old = state;
+  }
+/* CIC_TOGGLE_THRESH_PAIR > CIC_TOGGLE_THRESH_SCIC */
+  if(togglecount > CIC_TOGGLE_THRESH_PAIR) {
+    return CIC_PAIR;
+  } else if(togglecount > CIC_TOGGLE_THRESH_SCIC) {
+    return CIC_SCIC;
+  } else if(state) {
+    return CIC_OK;
+  } else return CIC_FAIL;
+}
+
+void cic_init(int allow_pairmode) {
+  BITBAND(SNES_CIC_PAIR_REG->FIODIR, SNES_CIC_PAIR_BIT) = 1;
+  if(allow_pairmode) {
+    BITBAND(SNES_CIC_PAIR_REG->FIOCLR, SNES_CIC_PAIR_BIT) = 1;
+  } else {
+    BITBAND(SNES_CIC_PAIR_REG->FIOSET, SNES_CIC_PAIR_BIT) = 1;
+  }
+  BITBAND(SNES_CIC_D0_REG->FIODIR, SNES_CIC_D0_BIT) = 0;
+  BITBAND(SNES_CIC_D1_REG->FIODIR, SNES_CIC_D1_BIT) = 0;
+}
+
+/* prepare GPIOs for pair mode + set initial modes */
+void cic_pair(int init_vmode, int init_d4) {
+  cic_videomode(init_vmode);
+  cic_d4(init_d4);
+
+  BITBAND(SNES_CIC_D0_REG->FIODIR, SNES_CIC_D0_BIT) = 1;
+  BITBAND(SNES_CIC_D1_REG->FIODIR, SNES_CIC_D1_BIT) = 1;
+}
+
+void cic_videomode(int value) {
+  if(value) {
+    BITBAND(SNES_CIC_D0_REG->FIOSET, SNES_CIC_D0_BIT) = 1;
+  } else {
+    BITBAND(SNES_CIC_D0_REG->FIOCLR, SNES_CIC_D0_BIT) = 1;
+  }
+}
+
+void cic_d4(int value) {
+  if(value) {
+    BITBAND(SNES_CIC_D1_REG->FIOSET, SNES_CIC_D1_BIT) = 1;
+  } else {
+    BITBAND(SNES_CIC_D1_REG->FIOCLR, SNES_CIC_D1_BIT) = 1;
+  }
+}
+

src/tests/cic.h

@@ -0,0 +1,23 @@
+#ifndef _CIC_H
+#define _CIC_H
+
+#define CIC_SAMPLECOUNT	(100000)
+#define CIC_TOGGLE_THRESH_PAIR	(2500)
+#define CIC_TOGGLE_THRESH_SCIC	(10)
+
+#include <arm/NXP/LPC17xx/LPC17xx.h>
+#include "bits.h"
+
+enum cicstates { CIC_OK = 0, CIC_FAIL, CIC_PAIR, CIC_SCIC };
+enum cic_region { CIC_NTSC = 0, CIC_PAL };
+
+void print_cic_state(void);
+char *get_cic_statename(enum cicstates state);
+enum cicstates get_cic_state(void);
+void cic_init(int allow_pairmode);
+
+void cic_pair(int init_vmode, int init_d4);
+void cic_videomode(int value);
+void cic_d4(int value);
+
+#endif

src/tests/cli.c

@@ -0,0 +1,576 @@
+/* tapplay - TAP file playback for sd2iec hardware
+   Copyright (C) 2009  Ingo Korb <ingo@akana.de>
+
+   Inspiration and low-level SD/MMC access based on code from MMC2IEC
+     by Lars Pontoppidan et al., see sdcard.c|h and config.h.
+
+   FAT filesystem access based on code from ChaN and Jim Brain, see ff.c|h.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; version 2 of the License only.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+
+   cli.c: The command line interface
+
+*/
+
+#include <arm/NXP/LPC17xx/LPC17xx.h>
+#include <arm/bits.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <string.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include "config.h"
+#include "diskio.h"
+#include "ff.h"
+#include "timer.h"
+#include "uart.h"
+#include "fileops.h"
+#include "memory.h"
+#include "snes.h"
+#include "fpga.h"
+#include "fpga_spi.h"
+#include "cic.h"
+#include "xmodem.h"
+#include "rtc.h"
+
+#include "cli.h"
+
+#define MAX_LINE 250
+
+/* Variables */
+static char cmdbuffer[MAX_LINE+1];
+static char *curchar;
+
+/* Word lists */
+static char command_words[] =
+  "cd\0reset\0sreset\0dir\0ls\0test\0resume\0loadrom\0loadraw\0saveraw\0put\0rm\0d4\0vmode\0mapper\0settime\0time\0setfeature\0hexdump\0w8\0w16\0memsel\0";
+enum { CMD_CD = 0, CMD_RESET, CMD_SRESET, CMD_DIR, CMD_LS, CMD_TEST, CMD_RESUME, CMD_LOADROM, CMD_LOADRAW, CMD_SAVERAW, CMD_PUT, CMD_RM, CMD_D4, CMD_VMODE, CMD_MAPPER, CMD_SETTIME, CMD_TIME, CMD_SETFEATURE, CMD_HEXDUMP, CMD_W8, CMD_W16, CMD_MEMSEL };
+
+/* ------------------------------------------------------------------------- */
+/*   Parse functions                                                         */
+/* ------------------------------------------------------------------------- */
+
+/* Skip spaces at curchar */
+static uint8_t skip_spaces(void) {
+  uint8_t res = (*curchar == ' ' || *curchar == 0);
+
+  while (*curchar == ' ')
+    curchar++;
+
+  return res;
+}
+
+/* Parse the string in curchar for an integer with bounds [lower,upper] */
+static int32_t parse_unsigned(uint32_t lower, uint32_t upper, uint8_t base) {
+  char *end;
+  uint32_t result;
+
+  if (strlen(curchar) == 1 && *curchar == '?') {
+    printf("Number between %ld[0x%lx] and %ld[0x%lx] expected\n",lower,lower,upper,upper);
+    return -2;
+  }
+
+  result = strtoul(curchar, &end, base);
+  if ((*end != ' ' && *end != 0) || errno != 0) {
+    printf("Invalid numeric argument\n");
+    return -1;
+  }
+
+  curchar = end;
+  skip_spaces();
+
+  if (result < lower || result > upper) {
+    printf("Numeric argument out of range (%ld..%ld)\n",lower,upper);
+    return -1;
+  }
+
+  return result;
+}
+/* Parse the string starting with curchar for a word in wordlist */
+static int8_t parse_wordlist(char *wordlist) {
+  uint8_t i, matched;
+  char *cur, *ptr;
+  char c;
+
+  i = 0;
+  ptr = wordlist;
+
+  // Command list on "?"
+  if (strlen(curchar) == 1 && *curchar == '?') {
+    printf("Commands available: \n ");
+    while (1) {
+      c = *ptr++;
+      if (c == 0) {
+        if (*ptr == 0) {
+          printf("\n");
+          return -2;
+        } else {
+          printf("\n ");
+        }
+      } else
+        uart_putc(c);
+    }
+  }
+
+  while (1) {
+    cur = curchar;
+    matched = 1;
+    c = *ptr;
+    do {
+      // If current word list character is \0: No match found
+      if (c == 0) {
+        printf("Unknown word: %s\n",curchar);
+        return -1;
+      }
+
+      if (tolower(c) != tolower(*cur)) {
+        // Check for end-of-word
+        if (cur != curchar && (*cur == ' ' || *cur == 0)) {
+          // Partial match found, return that
+          break;
+        } else {
+          matched = 0;
+          break;
+        }
+      }
+      ptr++;
+      cur++;
+      c = *ptr;
+    } while (c != 0);
+
+    if (matched) {
+      char *tmp = curchar;
+
+      curchar = cur;
+      // Return match only if whitespace or end-of-string follows
+      // (avoids mismatching partial words)
+      if (skip_spaces()) {
+        return i;
+      } else {
+        printf("Unknown word: %s\n(use ? for help)\n",tmp);
+        return -1;
+      }
+    } else {
+      // Try next word in list
+      i++;
+      while (*ptr++ != 0) ;
+    }
+  }
+}
+
+/* Read a line from serial, uses cmdbuffer as storage */
+static char *getline(char *prompt) {
+  int i=0;
+  char c;
+
+  printf("\n%s",prompt);
+  memset(cmdbuffer,0,sizeof(cmdbuffer));
+
+  while (1) {
+    c = uart_getc();
+    if (c == 13)
+      break;
+
+    if (c == 27 || c == 3) {
+      printf("\\\n%s",prompt);
+      i = 0;
+      memset(cmdbuffer,0,sizeof(cmdbuffer));
+      continue;
+    }
+
+    if (c == 127 || c == 8) {
+      if (i > 0) {
+        i--;
+        uart_putc(8);   // backspace
+        uart_putc(' '); // erase character
+        uart_putc(8);   // backspace
+      } else
+        continue;
+    } else {
+      if (i < sizeof(cmdbuffer)-1) {
+        cmdbuffer[i++] = c;
+        uart_putc(c);
+      }
+    }
+  }
+  cmdbuffer[i] = 0;
+  return cmdbuffer;
+}
+
+
+/* ------------------------------------------------------------------------- */
+/*   Command functions                                                       */
+/* ------------------------------------------------------------------------- */
+
+/* Reset */
+static void cmd_reset(void) {
+  /* force watchdog reset */
+  LPC_WDT->WDTC = 256; // minimal timeout
+  LPC_WDT->WDCLKSEL = BV(31); // internal RC, lock register
+  LPC_WDT->WDMOD = BV(0) | BV(1); // enable watchdog and reset-by-watchdog
+  LPC_WDT->WDFEED = 0xaa;
+  LPC_WDT->WDFEED = 0x55; // initial feed to really enable WDT
+}
+
+/* Show the contents of the current directory */
+static void cmd_show_directory(void) {
+  FRESULT res;
+  DIR dh;
+  FILINFO finfo;
+  uint8_t *name;
+
+  f_getcwd((TCHAR*)file_lfn, 255);
+
+  res = f_opendir(&dh, (TCHAR*)file_lfn);
+  if (res != FR_OK) {
+    printf("f_opendir failed, result %d\n",res);
+    return;
+  }
+
+  finfo.lfname = (TCHAR*)file_lfn;
+  finfo.lfsize = 255;
+
+  do {
+    /* Read the next entry */
+    res = f_readdir(&dh, &finfo);
+    if (res != FR_OK) {
+      printf("f_readdir failed, result %d\n",res);
+      return;
+    }
+
+    /* Abort if none was found */
+    if (!finfo.fname[0])
+      break;
+
+    /* Skip volume labels */
+    if (finfo.fattrib & AM_VOL)
+      continue;
+
+    /* Select between LFN and 8.3 name */
+    if (finfo.lfname[0])
+      name = (uint8_t*)finfo.lfname;
+    else {
+      name = (uint8_t*)finfo.fname;
+      strlwr((char *)name);
+    }
+
+    printf("%s",name);
+
+    /* Directory indicator (Unix-style) */
+    if (finfo.fattrib & AM_DIR)
+      uart_putc('/');
+
+    printf("\n");
+  } while (finfo.fname[0]);
+}
+
+
+static void cmd_loadrom(void) {
+  uint32_t address = 0;
+  uint8_t flags = LOADROM_WITH_SRAM | LOADROM_WITH_RESET;
+  load_rom((uint8_t*)curchar, address, flags);
+}
+
+static void cmd_loadraw(void) {
+  uint32_t address = parse_unsigned(0,16777216,16);
+  load_sram((uint8_t*)curchar, address);
+}
+
+static void cmd_saveraw(void) {
+  uint32_t address = parse_unsigned(0,16777216,16);
+  uint32_t length = parse_unsigned(0,16777216,16);
+  save_sram((uint8_t*)curchar, length, address);
+}
+
+static void cmd_d4(void) {
+  int32_t hz;
+
+  if(get_cic_state() != CIC_PAIR) {
+    printf("not in pair mode\n");
+  } else {
+    hz = parse_unsigned(50,60,10);
+    if(hz==50) {
+      cic_d4(CIC_PAL);
+    } else {
+      cic_d4(CIC_NTSC);
+    }
+    printf("ok\n");
+  }
+}
+
+static void cmd_vmode(void) {
+  int32_t hz;
+  if(get_cic_state() != CIC_PAIR) {
+    printf("not in pair mode\n");
+  } else {
+    hz = parse_unsigned(50,60,10);
+    if(hz==50) {
+      cic_videomode(CIC_PAL);
+    } else {
+      cic_videomode(CIC_NTSC);
+    }
+    printf("ok\n");
+  }
+}
+
+void cmd_put(void) {
+  if(*curchar != 0) {
+    file_open((uint8_t*)curchar, FA_CREATE_ALWAYS | FA_WRITE);
+    if(file_res) {
+      printf("FAIL: error opening file %s\n", curchar);
+    } else {
+      printf("OK, start xmodem transfer now.\n");
+      xmodem_rxfile(&file_handle);
+    }
+    file_close();
+  } else {
+    printf("Usage: put <filename>\n");
+  }
+}
+
+void cmd_rm(void) {
+  FRESULT res = f_unlink(curchar);
+  if(res) printf("Error %d removing %s\n", res, curchar);
+}
+
+void cmd_mapper(void) {
+  int32_t mapper;
+  mapper = parse_unsigned(0,7,10);
+  set_mapper((uint8_t)mapper & 0x7);
+  printf("mapper set to %ld\n", mapper);
+}
+
+void cmd_sreset(void) {
+  if(*curchar != 0) {
+    int32_t resetstate;
+    resetstate = parse_unsigned(0,1,10);
+    snes_reset(resetstate);
+  } else {
+    snes_reset(1);
+    delay_ms(20);
+    snes_reset(0);
+  }
+}
+void cmd_settime(void) {
+  struct tm time;
+  if(strlen(curchar) != 4+2+2 + 2+2+2) {
+    printf("invalid time format (need YYYYMMDDhhmmss)\n");
+  } else {
+    time.tm_sec = atoi(curchar+4+2+2+2+2);
+    curchar[4+2+2+2+2] = 0;
+    time.tm_min = atoi(curchar+4+2+2+2);
+    curchar[4+2+2+2] = 0;
+    time.tm_hour = atoi(curchar+4+2+2);
+    curchar[4+2+2] = 0;
+    time.tm_mday = atoi(curchar+4+2);
+    curchar[4+2] = 0;
+    time.tm_mon = atoi(curchar+4);
+    curchar[4] = 0;
+    time.tm_year = atoi(curchar);
+    set_rtc(&time);
+  }
+}
+
+void cmd_time(void) {
+  struct tm time;
+  read_rtc(&time);
+  printf("%04d-%02d-%02d %02d:%02d:%02d\n", time.tm_year, time.tm_mon,
+    time.tm_mday, time.tm_hour, time.tm_min, time.tm_sec);
+}
+
+void cmd_setfeature(void) {
+  uint8_t feat = parse_unsigned(0, 255, 16);
+  fpga_set_features(feat);
+}
+
+void cmd_hexdump(void) {
+  uint32_t offset = parse_unsigned(0, 16777215, 16);
+  uint32_t len = parse_unsigned(0, 16777216, 16);
+  sram_hexdump(offset, len);
+}
+
+void cmd_w8(void) {
+  uint32_t offset = parse_unsigned(0, 16777215, 16);
+  uint8_t val = parse_unsigned(0, 255, 16);
+  sram_writebyte(val, offset);
+}
+
+void cmd_w16(void) {
+  uint32_t offset = parse_unsigned(0, 16777215, 16);
+  uint16_t val = parse_unsigned(0, 65535, 16);
+  sram_writeshort(val, offset);
+}
+
+void cmd_memsel(void) {
+  uint8_t unit = parse_unsigned(0,1,10);
+  fpga_select_mem(unit);
+}
+/* ------------------------------------------------------------------------- */
+/*   CLI interface functions                                                 */
+/* ------------------------------------------------------------------------- */
+
+void cli_init(void) {
+}
+
+void cli_entrycheck() {
+  if(uart_gotc() && uart_getc() == 27) {
+    printf("*** BREAK\n");
+    cli_loop();
+  }
+}
+
+void cli_loop(void) {
+  snes_reset(1);
+  while (1) {
+    curchar = getline(">");
+    printf("\n");
+
+    /* Process medium changes before executing the command */
+    if (disk_state != DISK_OK && disk_state != DISK_REMOVED) {
+      FRESULT res;
+
+      printf("Medium changed... ");
+      res = f_mount(0,&fatfs);
+      if (res != FR_OK) {
+        printf("Failed to mount new medium, result %d\n",res);
+      } else {
+        printf("Ok\n");
+      }
+
+    }
+
+    /* Remove whitespace */
+    while (*curchar == ' ') curchar++;
+    while (strlen(curchar) > 0 && curchar[strlen(curchar)-1] == ' ')
+      curchar[strlen(curchar)-1] = 0;
+
+    /* Ignore empty lines */
+    if (strlen(curchar) == 0)
+      continue;
+
+    /* Parse command */
+    int8_t command = parse_wordlist(command_words);
+    if (command < 0)
+      continue;
+
+
+    FRESULT res;
+    switch (command) {
+    case CMD_CD:
+#if _FS_RPATH
+      if (strlen(curchar) == 0) {
+        f_getcwd((TCHAR*)file_lfn, 255);
+        printf("%s\n",file_lfn);
+        break;
+      }
+
+      res = f_chdir((const TCHAR *)curchar);
+      if (res != FR_OK) {
+        printf("chdir %s failed with result %d\n",curchar,res);
+      } else {
+        printf("Ok.\n");
+      }
+#else
+      printf("cd not supported.\n");
+      res;
+#endif
+    break;
+    case CMD_RESET:
+      cmd_reset();
+      break;
+
+    case CMD_SRESET:
+      cmd_sreset();
+      break;
+
+    case CMD_DIR:
+    case CMD_LS:
+      cmd_show_directory();
+      break;
+
+    case CMD_RESUME:
+      return;
+      break;
+
+    case CMD_LOADROM:
+      cmd_loadrom();
+      break;
+
+    case CMD_LOADRAW:
+      cmd_loadraw();
+      break;
+
+    case CMD_SAVERAW:
+      cmd_saveraw();
+      break;
+
+    case CMD_RM:
+      cmd_rm();
+      break;
+
+    case CMD_D4:
+      cmd_d4();
+      break;
+
+    case CMD_VMODE:
+      cmd_vmode();
+      break;
+
+    case CMD_PUT:
+      cmd_put();
+      break;
+
+    case CMD_MAPPER:
+      cmd_mapper();
+      break;
+
+    case CMD_SETTIME:
+      cmd_settime();
+      break;
+
+    case CMD_TIME:
+      cmd_time();
+      break;
+
+    case CMD_TEST:
+      testbattery();
+      break;
+
+    case CMD_SETFEATURE:
+      cmd_setfeature();
+      break;
+
+    case CMD_HEXDUMP:
+      cmd_hexdump();
+      break;
+
+    case CMD_W8:
+      cmd_w8();
+      break;
+
+    case CMD_W16:
+      cmd_w16();
+      break;
+
+    case CMD_MEMSEL:
+      cmd_memsel();
+      break;
+
+    }
+  }
+}

src/tests/cli.h

@@ -0,0 +1,34 @@
+/* tapplay - TAP file playback for sd2iec hardware
+   Copyright (C) 2009  Ingo Korb <ingo@akana.de>
+
+   Inspiration and low-level SD/MMC access based on code from MMC2IEC
+     by Lars Pontoppidan et al., see sdcard.c|h and config.h.
+
+   FAT filesystem access based on code from ChaN and Jim Brain, see ff.c|h.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; version 2 of the License only.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+
+   cli.h: Definitions for cli.c
+
+*/
+
+#ifndef CLI_H
+#define CLI_H
+
+void cli_init(void);
+void cli_loop(void);
+void cli_entrycheck(void);
+
+#endif

src/tests/clock.c

@@ -0,0 +1,109 @@
+/* ___DISCLAIMER___ */
+
+/* clock.c: PLL, CCLK, PCLK controls */
+
+#include <arm/NXP/LPC17xx/LPC17xx.h>
+#include "clock.h"
+#include "bits.h"
+#include "uart.h"
+
+void clock_disconnect() {
+  disconnectPLL0();
+  disablePLL0();
+}
+
+void clock_init() {
+
+/* set flash access time to 5 clks (80<f<=100MHz) */
+  setFlashAccessTime(5);
+
+/* setup PLL0 for ~44100*256*8 Hz
+   Base clock: 12MHz
+   Multiplier:  429
+   Pre-Divisor:  19
+   Divisor:       6
+   (want: 90316800, get: 90315789.47)
+   -> DAC freq = 44099.5 Hz
+   -> FPGA freq = 11289473.7Hz
+   First, disable and disconnect PLL0.
+*/
+//  clock_disconnect();
+
+/* PLL is disabled and disconnected. setup PCLK NOW as it cannot be changed
+   reliably with PLL0 connected.
+   see:
+   http://ics.nxp.com/support/documents/microcontrollers/pdf/errata.lpc1754.pdf
+*/
+
+
+/* continue with PLL0 setup:
+   enable the xtal oscillator and wait for it to become stable
+   set the oscillator as clk source for PLL0
+   set PLL0 multiplier+predivider
+   enable PLL0
+   set CCLK divider
+   wait for PLL0 to lock
+   connect PLL0
+   done
+ */
+  enableMainOsc();
+  setClkSrc(CLKSRC_MAINOSC);
+// XXX  setPLL0MultPrediv(429, 19);
+// XXX  setPLL0MultPrediv(23, 2);
+  setPLL0MultPrediv(12, 1);
+  enablePLL0();
+  setCCLKDiv(3);
+  connectPLL0();
+}
+
+void setFlashAccessTime(uint8_t clocks) {
+  LPC_SC->FLASHCFG=FLASHTIM(clocks);
+}
+
+void setPLL0MultPrediv(uint16_t mult, uint8_t prediv) {
+  LPC_SC->PLL0CFG=PLL_MULT(mult) | PLL_PREDIV(prediv);
+  PLL0feed();
+}
+
+void enablePLL0() {
+  LPC_SC->PLL0CON |= PLLE0;
+  PLL0feed();
+}
+
+void disablePLL0() {
+  LPC_SC->PLL0CON &= ~PLLE0;
+  PLL0feed();
+}
+
+void connectPLL0() {
+  while(!(LPC_SC->PLL0STAT&PLOCK0));
+  LPC_SC->PLL0CON |= PLLC0;
+  PLL0feed();
+}
+
+void disconnectPLL0() {
+  LPC_SC->PLL0CON &= ~PLLC0;
+  PLL0feed();
+}
+
+void setCCLKDiv(uint8_t div) {
+  LPC_SC->CCLKCFG=CCLK_DIV(div);
+}
+
+void enableMainOsc() {
+  LPC_SC->SCS=OSCEN;
+  while(!(LPC_SC->SCS&OSCSTAT));
+}
+
+void disableMainOsc() {
+  LPC_SC->SCS=0;
+}
+
+void PLL0feed() {
+  LPC_SC->PLL0FEED=0xaa;
+  LPC_SC->PLL0FEED=0x55;
+}
+
+void setClkSrc(uint8_t src) {
+  LPC_SC->CLKSRCSEL=src;
+}

src/tests/clock.h

@@ -0,0 +1,79 @@
+#ifndef _CLOCK_H
+#define _CLOCK_H
+
+#define PLL_MULT(x)     ((x-1)&0x7fff)
+#define PLL_PREDIV(x)   (((x-1)<<16)&0xff0000)
+#define CCLK_DIV(x)     ((x-1)&0xff)
+#define CLKSRC_MAINOSC  (1)
+#define PLLE0           (1<<0)
+#define PLLC0           (1<<1)
+#define PLOCK0          (1<<26)
+#define OSCEN           (1<<5)
+#define OSCSTAT         (1<<6)
+#define FLASHTIM(x)     (((x-1)<<12)|0x3A)
+
+#define PCLK_CCLK(x)    (1<<(x))
+#define PCLK_CCLK4(x)   (0)
+#define PCLK_CCLK8(x)   (3<<(x))
+#define PCLK_CCLK2(x)   (2<<(x))
+
+/* shift values for use with PCLKSEL0 */
+#define PCLK_WDT	(0)
+#define PCLK_TIMER0	(2)
+#define PCLK_TIMER1	(4)
+#define PCLK_UART0	(6)
+#define PCLK_UART1	(8)
+#define PCLK_PWM1	(12)
+#define PCLK_I2C0	(14)
+#define PCLK_SPI	(16)
+#define PCLK_SSP1	(20)
+#define PCLK_DAC	(22)
+#define PCLK_ADC	(24)
+#define PCLK_CAN1	(26)
+#define PCLK_CAN2	(28)
+#define PCLK_ACF	(30)
+
+/* shift values for use with PCLKSEL1 */
+#define PCLK_QEI	(0)
+#define PCLK_GPIOINT	(2)
+#define PCLK_PCB	(4)
+#define PCLK_I2C1	(6)
+#define PCLK_SSP0	(10)
+#define PCLK_TIMER2	(12)
+#define PCLK_TIMER3     (14)
+#define PCLK_UART2	(16)
+#define PCLK_UART3	(18)
+#define PCLK_I2C2	(20)
+#define PCLK_I2S	(22)
+#define PCLK_RIT	(26)
+#define PCLK_SYSCON	(28)
+#define PCLK_MC		(30)
+
+void clock_disconnect(void);
+
+void clock_init(void);
+
+void setFlashAccessTime(uint8_t clocks);
+
+void setPLL0MultPrediv(uint16_t mult, uint8_t prediv);
+
+void enablePLL0(void);
+
+void disablePLL0(void);
+
+void connectPLL0(void);
+
+void disconnectPLL0(void);
+
+void setCCLKDiv(uint8_t div);
+
+void enableMainOsc(void);
+
+void disableMainOsc(void);
+
+void PLL0feed(void);
+
+void setClkSrc(uint8_t src);
+
+
+#endif

src/tests/conf2h.awk

@@ -0,0 +1,29 @@
+#! /usr/bin/gawk -f
+
+# Trivial little script to convert from a makefile-style configuration
+# file to a C header. No copyright claimed.
+
+BEGIN {
+  print "// autoconf.h generated from " ARGV[1] " at " strftime() "\n" \
+    "#ifndef AUTOCONF_H\n" \
+    "#define AUTOCONF_H"
+}
+
+/^#/ { sub(/^#/,"//") }
+
+/^CONFIG_.*=/ {
+  if (/=n$/) {
+    sub(/^/,"// ");
+  } else {
+    sub(/^/,"#define ")
+    if (/=y$/) {
+      sub(/=.*$/,"")
+    } else {
+      sub(/=/," ")
+    }
+  }
+}
+
+{ print }
+
+END { print "#endif" }

src/tests/config

@@ -0,0 +1,4 @@
+CONFIG_VERSION=0.0.1
+CONFIG_FWVER=16777214
+#CONFIG_FWVER=1146310227
+CONFIG_MCU_FOSC=12000000

src/tests/config.h

@@ -0,0 +1,97 @@
+#ifndef _CONFIG_H
+#define _CONFIG_H
+
+// #define DEBUG_FS
+// #define DEBUG_SD
+// #define DEBUG_IRQ
+// #define DEBUG_MSU1
+
+#define VER                       "0.0.1(NSFW)"
+#define IN_AHBRAM                 __attribute__ ((section(".ahbram")))
+
+#define SD_DT_INT_SETUP()         do {\
+                                    BITBAND(LPC_GPIOINT->IO2IntEnR, SD_DT_BIT) = 1;\
+                                    BITBAND(LPC_GPIOINT->IO2IntEnF, SD_DT_BIT) = 1;\
+                                  } while(0)
+
+#define SD_CHANGE_DETECT          (BITBAND(LPC_GPIOINT->IO2IntStatR, SD_DT_BIT)\
+                                   |BITBAND(LPC_GPIOINT->IO2IntStatF, SD_DT_BIT))
+
+#define SD_CHANGE_CLR()           do {LPC_GPIOINT->IO2IntClr = BV(SD_DT_BIT);} while(0)
+
+#define SD_DT_REG                 LPC_GPIO0
+#define SD_DT_BIT                 8
+#define SD_WP_REG                 LPC_GPIO0
+#define SD_WP_BIT                 6
+
+#define SDCARD_DETECT             (!(BITBAND(SD_DT_REG->FIOPIN, SD_DT_BIT)))
+#define SDCARD_WP                 (BITBAND(SD_WP_REG->FIOPIN, SD_WP_BIT))
+#define SD_SUPPLY_VOLTAGE         (1L<<21) /* 3.3V - 3.4V */
+#define CONFIG_SD_BLOCKTRANSFER   1
+#define CONFIG_SD_AUTO_RETRIES    10
+// #define SD_CHANGE_VECT
+// #define CONFIG_SD_DATACRC 1
+
+#define CONFIG_UART_NUM	          3
+// #define CONFIG_CPU_FREQUENCY      90315789
+#define CONFIG_CPU_FREQUENCY      96000000
+//#define CONFIG_CPU_FREQUENCY      46000000
+#define CONFIG_UART_PCLKDIV       1
+#define CONFIG_UART_TX_BUF_SHIFT  8
+#define CONFIG_UART_BAUDRATE      921600
+#define CONFIG_UART_DEADLOCKABLE
+
+#define SSP_CLK_DIVISOR_FAST 2
+#define SSP_CLK_DIVISOR_SLOW 250
+
+#define SSP_CLK_DIVISOR_FPGA_FAST 6
+#define SSP_CLK_DIVISOR_FPGA_SLOW 20
+
+#define SNES_RESET_REG            LPC_GPIO1
+#define SNES_RESET_BIT            26
+
+#define SNES_CIC_D0_REG           LPC_GPIO0
+#define SNES_CIC_D0_BIT           1
+
+#define SNES_CIC_D1_REG           LPC_GPIO0
+#define SNES_CIC_D1_BIT           0
+
+#define SNES_CIC_STATUS_REG       LPC_GPIO1
+#define SNES_CIC_STATUS_BIT       29
+
+#define SNES_CIC_PAIR_REG         LPC_GPIO1
+#define SNES_CIC_PAIR_BIT         25
+
+#define FPGA_MCU_RDY_REG          LPC_GPIO2
+#define FPGA_MCU_RDY_BIT          9
+
+#define QSORT_MAXELEM             2048
+
+#define SSP_REGS LPC_SSP0
+#define SSP_PCLKREG PCLKSEL1
+// 1: PCLKSEL0
+#define SSP_PCLKBIT 10
+// 1: 20
+#define SSP_DMAID_TX 0
+// 1: 2
+#define SSP_DMAID_RX 1
+// 1: 3
+#define SSP_DMACH LPC_GPDMACH0
+
+#define SD_CLKREG LPC_GPIO0
+#define SD_CMDREG LPC_GPIO0
+#define SD_DAT0REG LPC_GPIO2
+#define SD_DAT1REG LPC_GPIO2
+#define SD_DAT2REG LPC_GPIO2
+#define SD_DAT3REG LPC_GPIO2
+
+#define SD_CLKPIN (7)
+#define SD_CMDPIN (9)
+#define SD_DAT0PIN (0)
+#define SD_DAT1PIN (1)
+#define SD_DAT2PIN (2)
+#define SD_DAT3PIN (3)
+
+#define SD_DAT (LPC_GPIO2->FIOPIN0)
+
+#endif

src/tests/crc.S

@@ -0,0 +1,92 @@
+/* CRC-7/CRC-16 (XModem) implementation for Cortex M3
+ *
+ * Written 2010 by Ingo Korb
+ */
+
+        .syntax unified
+        .section .text
+
+        /* uint8_t crc7update(uint8_t crc, const uint8_t data) */
+        .global crc7update
+        .thumb_func
+crc7update:
+        mov     r2, #8          // number of bits to process
+        lsl     r1, r1, #24     // pre-shift data byte to top of word
+
+loop:
+        lsl     r0, r0, #1      // shift CRC
+        lsls    r1, r1, #1      // shift data byte (highest bit now in C)
+        bcc     0f              // jump if bit was 0
+        eor     r0, r0, #0x80   // invert top bit of CRC if not
+0:      tst     r0, #0x80       // test top bit of CRC
+        beq     1f              // skip if top bit is clear
+        eor     r0, r0, #0x09   // apply polinomial
+1:      subs    r2, r2, #1      // decrememt bit cointer
+        bne     loop            // loop for next bit
+        uxtb    r0, r0          // clear top bits of result
+        bx      lr              // return
+
+        
+        /* uint16_t crc_xmodem_block(uint16_t crc, uint8_t *data, uint32_t len) */
+        .global crc_xmodem_block
+        .thumb_func
+crc_xmodem_block:
+        adr     r12, crc_table        // load address of crc table
+blockloop:
+        ldrb.w  r3, [r1], #1          // read data byte
+        eor     r3,  r3, r0, lsr #8   // EOR data byte
+        ldrh    r3, [r12, r3, lsl #1] // load value from CRC table
+        eor     r0,  r3, r0, lsl #8   // update CRC
+        uxth    r0, r0                // clear top bits of result
+        subs    r2, r2, #1            // decrement length
+        bne     blockloop             // loop while length > 0
+        bx      lr                    // return
+
+        /* uint16_t crc_xmodem_block(uint16_t crc, uint8_t *data, uint32_t len) */
+        .global crc_xmodem_update
+        .thumb_func
+crc_xmodem_update:
+        adr     r2, crc_table        // load address of crc table
+        eor     r1,  r1, r0, lsr #8  // EOR data byte
+        ldrh    r3, [r2, r1, lsl #1] // load value from CRC table
+        eor     r0,  r3, r0, lsl #8  // update CRC
+        uxth    r0, r0               // clear top bits of result
+        bx      lr                   // return
+
+
+crc_table:
+        .short 0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7
+        .short 0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef
+        .short 0x1231, 0x0210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6
+        .short 0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de
+        .short 0x2462, 0x3443, 0x0420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485
+        .short 0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d
+        .short 0x3653, 0x2672, 0x1611, 0x0630, 0x76d7, 0x66f6, 0x5695, 0x46b4
+        .short 0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc
+        .short 0x48c4, 0x58e5, 0x6886, 0x78a7, 0x0840, 0x1861, 0x2802, 0x3823
+        .short 0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b
+        .short 0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0x0a50, 0x3a33, 0x2a12
+        .short 0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a
+        .short 0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0x0c60, 0x1c41
+        .short 0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49
+        .short 0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0x0e70
+        .short 0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78
+        .short 0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f
+        .short 0x1080, 0x00a1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067
+        .short 0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e
+        .short 0x02b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256
+        .short 0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d
+        .short 0x34e2, 0x24c3, 0x14a0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405
+        .short 0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c
+        .short 0x26d3, 0x36f2, 0x0691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634
+        .short 0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab
+        .short 0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x08e1, 0x3882, 0x28a3
+        .short 0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a
+        .short 0x4a75, 0x5a54, 0x6a37, 0x7a16, 0x0af1, 0x1ad0, 0x2ab3, 0x3a92
+        .short 0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9
+        .short 0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0x0cc1
+        .short 0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8
+        .short 0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0
+
+ 
+        .end

src/tests/crc.h

@@ -0,0 +1,11 @@
+#ifndef CRC_H
+#define CRC_H
+
+uint8_t crc7update(uint8_t crc, uint8_t data);
+uint16_t crc_xmodem_update(uint16_t crc, uint8_t data);
+uint16_t crc_xmodem_block(uint16_t crc, const uint8_t *data, uint32_t length);
+
+// AVR-libc compatibility
+#define _crc_xmodem_update(crc,data) crc_xmodem_update(crc,data)
+
+#endif

src/tests/crc32.c

@@ -0,0 +1,110 @@
+/**
+ * \file crc32.c
+ * Functions and types for CRC checks.
+ *
+ * Generated on Sat Sep 25 18:06:34 2010,
+ * by pycrc v0.7.1, http://www.tty1.net/pycrc/
+ * using the configuration:
+ *    Width        = 32
+ *    Poly         = 0x04c11db7
+ *    XorIn        = 0xffffffff
+ *    ReflectIn    = True
+ *    XorOut       = 0xffffffff
+ *    ReflectOut   = True
+ *    Algorithm    = table-driven
+ *    Direct       = True
+ *****************************************************************************/
+#include "crc32.h"
+#include "config.h"
+#include <arm/NXP/LPC17xx/LPC17xx.h>
+#include <stdlib.h>
+
+/**
+ * Static table used for the table_driven implementation.
+ *****************************************************************************/
+static const uint32_t crc32_table[256] = {
+  0x00000000, 0x77073096, 0xee0e612c, 0x990951ba,
+  0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3,
+  0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
+  0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91,
+  0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
+  0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
+  0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec,
+  0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5,
+  0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
+  0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
+  0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940,
+  0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
+  0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116,
+  0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f,
+  0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
+  0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d,
+  0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a,
+  0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
+  0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818,
+  0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
+  0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
+  0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457,
+  0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c,
+  0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
+  0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
+  0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb,
+  0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
+  0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9,
+  0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086,
+  0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
+  0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4,
+  0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad,
+  0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
+  0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683,
+  0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
+  0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
+  0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe,
+  0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7,
+  0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
+  0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
+  0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252,
+  0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
+  0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60,
+  0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79,
+  0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
+  0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f,
+  0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04,
+  0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
+  0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a,
+  0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
+  0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
+  0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21,
+  0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e,
+  0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
+  0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
+  0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45,
+  0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
+  0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db,
+  0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0,
+  0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
+  0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6,
+  0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf,
+  0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
+  0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d
+};
+
+/**
+ * Update the crc value with new data.
+ *
+ * \param crc      The current crc value.
+ * \param data     Pointer to a buffer of \a data_len bytes.
+ * \param data_len Number of bytes in the \a data buffer.
+ * \return         The updated crc value.
+ *****************************************************************************/
+uint32_t crc32_update(uint32_t crc, const unsigned char data)
+{
+  unsigned int tbl_idx;
+
+  tbl_idx = (crc ^ data) & 0xff;
+  crc = (crc32_table[tbl_idx] ^ (crc >> 8)) & 0xffffffff;
+
+  return crc & 0xffffffff;
+}
+
+

src/tests/crc32.h

@@ -0,0 +1,68 @@
+/**
+ * \file crc32.h
+ * Functions and types for CRC checks.
+ *
+ * Generated on Sat Sep 25 18:06:37 2010,
+ * by pycrc v0.7.1, http://www.tty1.net/pycrc/
+ * using the configuration:
+ *    Width        = 32
+ *    Poly         = 0x04c11db7
+ *    XorIn        = 0xffffffff
+ *    ReflectIn    = True
+ *    XorOut       = 0xffffffff
+ *    ReflectOut   = True
+ *    Algorithm    = table-driven
+ *    Direct       = True
+ *****************************************************************************/
+#ifndef __CRC___H__
+#define __CRC___H__
+
+#include <arm/NXP/LPC17xx/LPC17xx.h>
+#include <stdlib.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * The definition of the used algorithm.
+ *****************************************************************************/
+#define CRC_ALGO_TABLE_DRIVEN 1
+
+/**
+ * Calculate the initial crc value.
+ *
+ * \return     The initial crc value.
+ *****************************************************************************/
+static inline uint32_t crc_init(void)
+{
+  return 0xffffffff;
+}
+
+/**
+ * Update the crc value with new data.
+ *
+ * \param crc      The current crc value.
+ * \param data     Pointer to a buffer of \a data_len bytes.
+ * \param data_len Number of bytes in the \a data buffer.
+ * \return         The updated crc value.
+ *****************************************************************************/
+uint32_t crc32_update(uint32_t crc, const unsigned char data);
+
+/**
+ * Calculate the final crc value.
+ *
+ * \param crc  The current crc value.
+ * \return     The final crc value.
+ *****************************************************************************/
+static inline uint32_t crc32_finalize(uint32_t crc)
+{
+  return crc ^ 0xffffffff;
+}
+
+
+#ifdef __cplusplus
+}           /* closing brace for extern "C" */
+#endif
+
+#endif      /* __CRC___H__ */

src/tests/diskio.h

@@ -0,0 +1,118 @@
+/*-----------------------------------------------------------------------
+/  Low level disk interface modlue include file   (C)ChaN, 2010
+/-----------------------------------------------------------------------*/
+
+#ifndef _DISKIO
+
+#define _READONLY	0	/* 1: Remove write functions */
+#define _USE_IOCTL	1	/* 1: Use disk_ioctl fucntion */
+
+#include <arm/NXP/LPC17xx/LPC17xx.h>
+
+#include "integer.h"
+
+
+/* Status of Disk Functions */
+typedef BYTE	DSTATUS;
+
+/* Results of Disk Functions */
+typedef enum {
+	RES_OK = 0,		/* 0: Successful */
+	RES_ERROR,		/* 1: R/W Error */
+	RES_WRPRT,		/* 2: Write Protected */
+	RES_NOTRDY,		/* 3: Not Ready */
+	RES_PARERR		/* 4: Invalid Parameter */
+} DRESULT;
+
+/**
+ * struct diskinfo0_t - disk info data structure for page 0
+ * @validbytes : Number of valid bytes in this struct
+ * @maxpage    : Highest diskinfo page supported
+ * @disktype   : type of the disk (DISK_TYPE_* values)
+ * @sectorsize : sector size divided by 256
+ * @sectorcount: number of sectors on the disk
+ *
+ * This is the struct returned in the data buffer when disk_getinfo
+ * is called with page=0.
+ */
+typedef struct {
+  uint8_t  validbytes;
+  uint8_t  maxpage;
+  uint8_t  disktype;
+  uint8_t  sectorsize;   /* divided by 256 */
+  uint32_t sectorcount;  /* 2 TB should be enough... (512 byte sectors) */
+} diskinfo0_t;
+
+
+
+/*---------------------------------------*/
+/* Prototypes for disk control functions */
+
+int assign_drives (int, int);
+DSTATUS disk_initialize (BYTE);
+DSTATUS disk_status (BYTE);
+DRESULT disk_read (BYTE, BYTE*, DWORD, BYTE);
+#if	_READONLY == 0
+DRESULT disk_write (BYTE, const BYTE*, DWORD, BYTE);
+#endif
+#define disk_ioctl(a,b,c) RES_OK
+
+void disk_init(void);
+
+/* Will be set to DISK_ERROR if any access on the card fails */
+enum diskstates { DISK_CHANGED = 0, DISK_REMOVED, DISK_OK, DISK_ERROR };
+
+extern int sd_offload, ff_sd_offload, sd_offload_tgt, newcard;
+extern int sd_offload_partial;
+extern uint16_t sd_offload_partial_start;
+extern uint16_t sd_offload_partial_end;
+extern volatile enum diskstates disk_state;
+
+/* Disk type - part of the external API except for ATA2! */
+#define DISK_TYPE_ATA        0
+#define DISK_TYPE_ATA2       1
+#define DISK_TYPE_SD         2
+#define DISK_TYPE_DF         3
+#define DISK_TYPE_NONE       7
+
+
+
+/* Disk Status Bits (DSTATUS) */
+
+#define STA_NOINIT		0x01	/* Drive not initialized */
+#define STA_NODISK		0x02	/* No medium in the drive */
+#define STA_PROTECT		0x04	/* Write protected */
+
+
+/* Command code for disk_ioctrl fucntion */
+
+/* Generic command (defined for FatFs) */
+#define CTRL_SYNC			0	/* Flush disk cache (for write functions) */
+#define GET_SECTOR_COUNT	1	/* Get media size (for only f_mkfs()) */
+#define GET_SECTOR_SIZE		2	/* Get sector size (for multiple sector size (_MAX_SS >= 1024)) */
+#define GET_BLOCK_SIZE		3	/* Get erase block size (for only f_mkfs()) */
+#define CTRL_ERASE_SECTOR	4	/* Force erased a block of sectors (for only _USE_ERASE) */
+
+/* Generic command */
+#define CTRL_POWER			5	/* Get/Set power status */
+#define CTRL_LOCK			6	/* Lock/Unlock media removal */
+#define CTRL_EJECT			7	/* Eject media */
+
+/* MMC/SDC specific ioctl command */
+#define MMC_GET_TYPE		10	/* Get card type */
+#define MMC_GET_CSD			11	/* Get CSD */
+#define MMC_GET_CID			12	/* Get CID */
+#define MMC_GET_OCR			13	/* Get OCR */
+#define MMC_GET_SDSTAT		14	/* Get SD status */
+
+/* ATA/CF specific ioctl command */
+#define ATA_GET_REV			20	/* Get F/W revision */
+#define ATA_GET_MODEL		21	/* Get model name */
+#define ATA_GET_SN			22	/* Get serial number */
+
+/* NAND specific ioctl command */
+#define NAND_FORMAT			30	/* Create physical format */
+
+
+#define _DISKIO
+#endif

src/tests/faulthandler.c

@@ -0,0 +1,20 @@
+#include <arm/NXP/LPC17xx/LPC17xx.h>
+#include "uart.h"
+
+void HardFault_Handler(void) {
+  printf("HFSR: %lx\n", SCB->HFSR);
+  while (1) ;
+}
+
+void MemManage_Handler(void) {
+  printf("MemManage - CFSR: %lx; MMFAR: %lx\n", SCB->CFSR, SCB->MMFAR);
+}
+
+void BusFault_Handler(void) {
+  printf("BusFault - CFSR: %lx; BFAR: %lx\n", SCB->CFSR, SCB->BFAR);
+}
+
+void UsageFault_Handler(void) {
+  printf("UsageFault - CFSR: %lx; BFAR: %lx\n", SCB->CFSR, SCB->BFAR);
+}
+

src/tests/ff.h

@@ -0,0 +1,547 @@
+/*---------------------------------------------------------------------------/
+/  FatFs - FAT file system module include file  R0.08a    (C)ChaN, 2010
+/----------------------------------------------------------------------------/
+/ FatFs module is a generic FAT file system module for small embedded systems.
+/ This is a free software that opened for education, research and commercial
+/ developments under license policy of following trems.
+/
+/  Copyright (C) 2010, ChaN, all right reserved.
+/
+/ * The FatFs module is a free software and there is NO WARRANTY.
+/ * No restriction on use. You can use, modify and redistribute it for
+/   personal, non-profit or commercial product UNDER YOUR RESPONSIBILITY.
+/ * Redistributions of source code must retain the above copyright notice.
+/
+/----------------------------------------------------------------------------*/
+
+#ifndef _FATFS
+#define _FATFS	8255	/* Revision ID */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "integer.h"	/* Basic integer types */
+#include "ffconf.h"		/* FatFs configuration options */
+
+#if _FATFS != _FFCONF
+#error Wrong configuration file (ffconf.h).
+#endif
+
+
+/* DBCS code ranges and SBCS extend char conversion table */
+
+#if _CODE_PAGE == 932	/* Japanese Shift-JIS */
+#define _DF1S	0x81	/* DBC 1st byte range 1 start */
+#define _DF1E	0x9F	/* DBC 1st byte range 1 end */
+#define _DF2S	0xE0	/* DBC 1st byte range 2 start */
+#define _DF2E	0xFC	/* DBC 1st byte range 2 end */
+#define _DS1S	0x40	/* DBC 2nd byte range 1 start */
+#define _DS1E	0x7E	/* DBC 2nd byte range 1 end */
+#define _DS2S	0x80	/* DBC 2nd byte range 2 start */
+#define _DS2E	0xFC	/* DBC 2nd byte range 2 end */
+
+#elif _CODE_PAGE == 936	/* Simplified Chinese GBK */
+#define _DF1S	0x81
+#define _DF1E	0xFE
+#define _DS1S	0x40
+#define _DS1E	0x7E
+#define _DS2S	0x80
+#define _DS2E	0xFE
+
+#elif _CODE_PAGE == 949	/* Korean */
+#define _DF1S	0x81
+#define _DF1E	0xFE
+#define _DS1S	0x41
+#define _DS1E	0x5A
+#define _DS2S	0x61
+#define _DS2E	0x7A
+#define _DS3S	0x81
+#define _DS3E	0xFE
+
+#elif _CODE_PAGE == 950	/* Traditional Chinese Big5 */
+#define _DF1S	0x81
+#define _DF1E	0xFE
+#define _DS1S	0x40
+#define _DS1E	0x7E
+#define _DS2S	0xA1
+#define _DS2E	0xFE
+
+#elif _CODE_PAGE == 437	/* U.S. (OEM) */
+#define _DF1S	0
+#define _EXCVT {0x80,0x9A,0x90,0x41,0x8E,0x41,0x8F,0x80,0x45,0x45,0x45,0x49,0x49,0x49,0x8E,0x8F,0x90,0x92,0x92,0x4F,0x99,0x4F,0x55,0x55,0x59,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
+				0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+				0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 720	/* Arabic (OEM) */
+#define _DF1S	0
+#define _EXCVT {0x80,0x81,0x45,0x41,0x84,0x41,0x86,0x43,0x45,0x45,0x45,0x49,0x49,0x8D,0x8E,0x8F,0x90,0x92,0x92,0x93,0x94,0x95,0x49,0x49,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
+				0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+				0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 737	/* Greek (OEM) */
+#define _DF1S	0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x92,0x92,0x93,0x94,0x95,0x96,0x97,0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87, \
+				0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0xAA,0x92,0x93,0x94,0x95,0x96,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+				0x97,0xEA,0xEB,0xEC,0xE4,0xED,0xEE,0xE7,0xE8,0xF1,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 775	/* Baltic (OEM) */
+#define _DF1S	0
+#define _EXCVT {0x80,0x9A,0x91,0xA0,0x8E,0x95,0x8F,0x80,0xAD,0xED,0x8A,0x8A,0xA1,0x8D,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0x95,0x96,0x97,0x97,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \
+				0xA0,0xA1,0xE0,0xA3,0xA3,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xB5,0xB6,0xB7,0xB8,0xBD,0xBE,0xC6,0xC7,0xA5,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+				0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE3,0xE8,0xE8,0xEA,0xEA,0xEE,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 850	/* Multilingual Latin 1 (OEM) */
+#define _DF1S	0
+#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0xDE,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x59,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \
+				0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+				0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE7,0xE9,0xEA,0xEB,0xED,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 852	/* Latin 2 (OEM) */
+#define _DF1S	0
+#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xDE,0x8F,0x80,0x9D,0xD3,0x8A,0x8A,0xD7,0x8D,0x8E,0x8F,0x90,0x91,0x91,0xE2,0x99,0x95,0x95,0x97,0x97,0x99,0x9A,0x9B,0x9B,0x9D,0x9E,0x9F, \
+				0xB5,0xD6,0xE0,0xE9,0xA4,0xA4,0xA6,0xA6,0xA8,0xA8,0xAA,0x8D,0xAC,0xB8,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBD,0xBF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC6,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD2,0xD3,0xD2,0xD5,0xD6,0xD7,0xB7,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+				0xE0,0xE1,0xE2,0xE3,0xE3,0xD5,0xE6,0xE6,0xE8,0xE9,0xE8,0xEB,0xED,0xED,0xDD,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xEB,0xFC,0xFC,0xFE,0xFF}
+
+#elif _CODE_PAGE == 855	/* Cyrillic (OEM) */
+#define _DF1S	0
+#define _EXCVT {0x81,0x81,0x83,0x83,0x85,0x85,0x87,0x87,0x89,0x89,0x8B,0x8B,0x8D,0x8D,0x8F,0x8F,0x91,0x91,0x93,0x93,0x95,0x95,0x97,0x97,0x99,0x99,0x9B,0x9B,0x9D,0x9D,0x9F,0x9F, \
+				0xA1,0xA1,0xA3,0xA3,0xA5,0xA5,0xA7,0xA7,0xA9,0xA9,0xAB,0xAB,0xAD,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB6,0xB6,0xB8,0xB8,0xB9,0xBA,0xBB,0xBC,0xBE,0xBE,0xBF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD3,0xD3,0xD5,0xD5,0xD7,0xD7,0xDD,0xD9,0xDA,0xDB,0xDC,0xDD,0xE0,0xDF, \
+				0xE0,0xE2,0xE2,0xE4,0xE4,0xE6,0xE6,0xE8,0xE8,0xEA,0xEA,0xEC,0xEC,0xEE,0xEE,0xEF,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF8,0xFA,0xFA,0xFC,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 857	/* Turkish (OEM) */
+#define _DF1S	0
+#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0x98,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x98,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9E, \
+				0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA6,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+				0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xDE,0x59,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 858	/* Multilingual Latin 1 + Euro (OEM) */
+#define _DF1S	0
+#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0xDE,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x59,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \
+				0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+				0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE7,0xE9,0xEA,0xEB,0xED,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 862	/* Hebrew (OEM) */
+#define _DF1S	0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
+				0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+				0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 866	/* Russian (OEM) */
+#define _DF1S	0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
+				0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+				0x90,0x91,0x92,0x93,0x9d,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F,0xF0,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 874	/* Thai (OEM, Windows) */
+#define _DF1S	0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
+				0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+				0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 1250 /* Central Europe (Windows) */
+#define _DF1S	0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x8D,0x8E,0x8F, \
+				0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xA3,0xB4,0xB5,0xB6,0xB7,0xB8,0xA5,0xAA,0xBB,0xBC,0xBD,0xBC,0xAF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xFF}
+
+#elif _CODE_PAGE == 1251 /* Cyrillic (Windows) */
+#define _DF1S	0
+#define _EXCVT {0x80,0x81,0x82,0x82,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x80,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x8D,0x8E,0x8F, \
+				0xA0,0xA2,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB2,0xA5,0xB5,0xB6,0xB7,0xA8,0xB9,0xAA,0xBB,0xA3,0xBD,0xBD,0xAF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF}
+
+#elif _CODE_PAGE == 1252 /* Latin 1 (Windows) */
+#define _DF1S	0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0xAd,0x9B,0x8C,0x9D,0xAE,0x9F, \
+				0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0x9F}
+
+#elif _CODE_PAGE == 1253 /* Greek (Windows) */
+#define _DF1S	0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
+				0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xA2,0xB8,0xB9,0xBA, \
+				0xE0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xF2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xFB,0xBC,0xFD,0xBF,0xFF}
+
+#elif _CODE_PAGE == 1254 /* Turkish (Windows) */
+#define _DF1S	0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x9D,0x9E,0x9F, \
+				0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0x9F}
+
+#elif _CODE_PAGE == 1255 /* Hebrew (Windows) */
+#define _DF1S	0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
+				0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+				0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 1256 /* Arabic (Windows) */
+#define _DF1S	0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x8C,0x9D,0x9E,0x9F, \
+				0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+				0x41,0xE1,0x41,0xE3,0xE4,0xE5,0xE6,0x43,0x45,0x45,0x45,0x45,0xEC,0xED,0x49,0x49,0xF0,0xF1,0xF2,0xF3,0x4F,0xF5,0xF6,0xF7,0xF8,0x55,0xFA,0x55,0x55,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 1257 /* Baltic (Windows) */
+#define _DF1S	0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
+				0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xA8,0xB9,0xAA,0xBB,0xBC,0xBD,0xBE,0xAF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xFF}
+
+#elif _CODE_PAGE == 1258 /* Vietnam (OEM, Windows) */
+#define _DF1S	0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0xAC,0x9D,0x9E,0x9F, \
+				0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xEC,0xCD,0xCE,0xCF,0xD0,0xD1,0xF2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xFE,0x9F}
+
+#elif _CODE_PAGE == 1	/* ASCII (for only non-LFN cfg) */
+#define _DF1S	0
+
+#else
+#error Unknown code page
+
+#endif
+
+
+
+/* Definitions of volume management */
+
+#if _MULTI_PARTITION		/* Multiple partition configuration */
+#define LD2PD(vol) (VolToPart[vol].pd)	/* Get physical drive# */
+#define LD2PT(vol) (VolToPart[vol].pt)	/* Get partition# */
+typedef struct {
+	BYTE pd;	/* Physical drive# */
+	BYTE pt;	/* Partition # (0-3) */
+} PARTITION;
+extern const PARTITION VolToPart[];	/* Volume - Physical location resolution table */
+
+#else						/* Single partition configuration */
+#define LD2PD(vol) (vol)	/* Logical drive# is bound to the same physical drive# */
+#define LD2PT(vol) 0		/* Always mounts the 1st partition */
+
+#endif
+
+
+
+/* Type of path name strings on FatFs API */
+
+#if _LFN_UNICODE			/* Unicode string */
+#if !_USE_LFN
+#error _LFN_UNICODE must be 0 in non-LFN cfg.
+#endif
+#ifndef _INC_TCHAR
+typedef WCHAR TCHAR;
+#define _T(x) L ## x
+#define _TEXT(x) L ## x
+#endif
+
+#else						/* ANSI/OEM string */
+#ifndef _INC_TCHAR
+typedef char TCHAR;
+#define _T(x) x
+#define _TEXT(x) x
+#endif
+
+#endif
+
+
+
+/* File system object structure (FATFS) */
+
+typedef struct {
+	BYTE	fs_type;		/* FAT sub-type (0:Not mounted) */
+	BYTE	drv;			/* Physical drive number */
+	BYTE	csize;			/* Sectors per cluster (1,2,4...128) */
+	BYTE	n_fats;			/* Number of FAT copies (1,2) */
+	BYTE	wflag;			/* win[] dirty flag (1:must be written back) */
+	BYTE	fsi_flag;		/* fsinfo dirty flag (1:must be written back) */
+	WORD	id;				/* File system mount ID */
+	WORD	n_rootdir;		/* Number of root directory entries (FAT12/16) */
+#if _MAX_SS != 512
+	WORD	ssize;			/* Bytes per sector (512,1024,2048,4096) */
+#endif
+#if _FS_REENTRANT
+	_SYNC_t	sobj;			/* Identifier of sync object */
+#endif
+#if !_FS_READONLY
+	DWORD	last_clust;		/* Last allocated cluster */
+	DWORD	free_clust;		/* Number of free clusters */
+	DWORD	fsi_sector;		/* fsinfo sector (FAT32) */
+#endif
+#if _FS_RPATH
+	DWORD	cdir;			/* Current directory start cluster (0:root) */
+#endif
+	DWORD	n_fatent;		/* Number of FAT entries (= number of clusters + 2) */
+	DWORD	fsize;			/* Sectors per FAT */
+	DWORD	fatbase;		/* FAT start sector */
+	DWORD	dirbase;		/* Root directory start sector (FAT32:Cluster#) */
+	DWORD	database;		/* Data start sector */
+	DWORD	winsect;		/* Current sector appearing in the win[] */
+	BYTE	win[_MAX_SS];	/* Disk access window for Directory, FAT (and Data on tiny cfg) */
+} FATFS;
+
+
+
+/* File object structure (FIL) */
+
+typedef struct {
+	FATFS*	fs;				/* Pointer to the owner file system object */
+	WORD	id;				/* Owner file system mount ID */
+	BYTE	flag;			/* File status flags */
+	BYTE	pad1;
+	DWORD	fptr;			/* File read/write pointer (0 on file open) */
+	DWORD	fsize;			/* File size */
+	DWORD	org_clust;		/* File start cluster (0 when fsize==0) */
+	DWORD	curr_clust;		/* Current cluster */
+	DWORD	dsect;			/* Current data sector */
+#if !_FS_READONLY
+	DWORD	dir_sect;		/* Sector containing the directory entry */
+	BYTE*	dir_ptr;		/* Ponter to the directory entry in the window */
+#endif
+#if _USE_FASTSEEK
+	DWORD*	cltbl;			/* Pointer to the cluster link map table (null on file open) */
+#endif
+#if _FS_SHARE
+	UINT	lockid;			/* File lock ID (index of file semaphore table) */
+#endif
+#if !_FS_TINY
+	BYTE	buf[_MAX_SS];	/* File data read/write buffer */
+#endif
+} FIL;
+
+
+
+/* Directory object structure (DIR) */
+
+typedef struct {
+	FATFS*	fs;				/* Pointer to the owner file system object */
+	WORD	id;				/* Owner file system mount ID */
+	WORD	index;			/* Current read/write index number */
+	DWORD	sclust;			/* Table start cluster (0:Root dir) */
+	DWORD	clust;			/* Current cluster */
+	DWORD	sect;			/* Current sector */
+	BYTE*	dir;			/* Pointer to the current SFN entry in the win[] */
+	BYTE*	fn;				/* Pointer to the SFN (in/out) {file[8],ext[3],status[1]} */
+#if _USE_LFN
+	WCHAR*	lfn;			/* Pointer to the LFN working buffer */
+	WORD	lfn_idx;		/* Last matched LFN index number (0xFFFF:No LFN) */
+#endif
+} DIR;
+
+
+
+/* File status structure (FILINFO) */
+
+typedef struct {
+	DWORD	fsize;			/* File size */
+	WORD	fdate;			/* Last modified date */
+	WORD	ftime;			/* Last modified time */
+	BYTE	fattrib;		/* Attribute */
+	TCHAR	fname[13];		/* Short file name (8.3 format) */
+	DWORD	clust;			/* start cluster */
+#if _USE_LFN
+	TCHAR*	lfname;			/* Pointer to the LFN buffer */
+	UINT 	lfsize;			/* Size of LFN buffer in TCHAR */
+#endif
+} FILINFO;
+
+
+
+/* File function return code (FRESULT) */
+
+typedef enum {
+	FR_OK = 0,				/* (0) Succeeded */
+	FR_DISK_ERR,			/* (1) A hard error occured in the low level disk I/O layer */
+	FR_INT_ERR,				/* (2) Assertion failed */
+	FR_NOT_READY,			/* (3) The physical drive cannot work */
+	FR_NO_FILE,				/* (4) Could not find the file */
+	FR_NO_PATH,				/* (5) Could not find the path */
+	FR_INVALID_NAME,		/* (6) The path name format is invalid */
+	FR_DENIED,				/* (7) Acces denied due to prohibited access or directory full */
+	FR_EXIST,				/* (8) Acces denied due to prohibited access */
+	FR_INVALID_OBJECT,		/* (9) The file/directory object is invalid */
+	FR_WRITE_PROTECTED,		/* (10) The physical drive is write protected */
+	FR_INVALID_DRIVE,		/* (11) The logical drive number is invalid */
+	FR_NOT_ENABLED,			/* (12) The volume has no work area */
+	FR_NO_FILESYSTEM,		/* (13) There is no valid FAT volume on the physical drive */
+	FR_MKFS_ABORTED,		/* (14) The f_mkfs() aborted due to any parameter error */
+	FR_TIMEOUT,				/* (15) Could not get a grant to access the volume within defined period */
+	FR_LOCKED,				/* (16) The operation is rejected according to the file shareing policy */
+	FR_NOT_ENOUGH_CORE,		/* (17) LFN working buffer could not be allocated */
+	FR_TOO_MANY_OPEN_FILES	/* (18) Number of open files > _FS_SHARE */
+} FRESULT;
+
+
+
+/*--------------------------------------------------------------*/
+/* FatFs module application interface                           */
+
+/* Low Level functions */
+FRESULT l_openfilebycluster(FATFS *fs, FIL *fp, const TCHAR *path, DWORD clust, DWORD fsize);   /* Open a file by its start cluster using supplied file size */
+FRESULT l_opendirbycluster (FATFS *fs, DIR *dj, const TCHAR *path, DWORD clust);
+
+/* application level functions */
+FRESULT f_mount (BYTE, FATFS*);						/* Mount/Unmount a logical drive */
+FRESULT f_open (FIL*, const TCHAR*, BYTE);			/* Open or create a file */
+FRESULT f_read (FIL*, void*, UINT, UINT*);			/* Read data from a file */
+FRESULT f_lseek (FIL*, DWORD);						/* Move file pointer of a file object */
+FRESULT f_close (FIL*);								/* Close an open file object */
+FRESULT f_opendir (DIR*, const TCHAR*);				/* Open an existing directory */
+FRESULT f_readdir (DIR*, FILINFO*);					/* Read a directory item */
+FRESULT f_stat (const TCHAR*, FILINFO*);			/* Get file status */
+
+#if !_FS_READONLY
+FRESULT f_write (FIL*, const void*, UINT, UINT*);	/* Write data to a file */
+FRESULT f_getfree (const TCHAR*, DWORD*, FATFS**);	/* Get number of free clusters on the drive */
+FRESULT f_truncate (FIL*);							/* Truncate file */
+FRESULT f_sync (FIL*);								/* Flush cached data of a writing file */
+FRESULT f_unlink (const TCHAR*);					/* Delete an existing file or directory */
+FRESULT	f_mkdir (const TCHAR*);						/* Create a new directory */
+FRESULT f_chmod (const TCHAR*, BYTE, BYTE);			/* Change attriburte of the file/dir */
+FRESULT f_utime (const TCHAR*, const FILINFO*);		/* Change timestamp of the file/dir */
+FRESULT f_rename (const TCHAR*, const TCHAR*);		/* Rename/Move a file or directory */
+#endif
+
+#if _USE_FORWARD
+FRESULT f_forward (FIL*, UINT(*)(const BYTE*,UINT), UINT, UINT*);	/* Forward data to the stream */
+#endif
+
+#if _USE_MKFS
+FRESULT f_mkfs (BYTE, BYTE, UINT);					/* Create a file system on the drive */
+#endif
+
+#if _FS_RPATH
+FRESULT f_chdrive (BYTE);							/* Change current drive */
+FRESULT f_chdir (const TCHAR*);						/* Change current directory */
+FRESULT f_getcwd (TCHAR*, UINT);					/* Get current directory */
+#endif
+
+#if _USE_STRFUNC
+int f_putc (TCHAR, FIL*);							/* Put a character to the file */
+int f_puts (const TCHAR*, FIL*);					/* Put a string to the file */
+int f_printf (FIL*, const TCHAR*, ...);				/* Put a formatted string to the file */
+TCHAR* f_gets (TCHAR*, int, FIL*);					/* Get a string from the file */
+#ifndef EOF
+#define EOF (-1)
+#endif
+#endif
+
+#define f_eof(fp) (((fp)->fptr == (fp)->fsize) ? 1 : 0)
+#define f_error(fp) (((fp)->flag & FA__ERROR) ? 1 : 0)
+#define f_tell(fp) ((fp)->fptr)
+#define f_size(fp) ((fp)->fsize)
+
+
+
+/*--------------------------------------------------------------*/
+/* Additional user defined functions                            */
+
+/* RTC function */
+#if !_FS_READONLY
+DWORD get_fattime (void);
+#endif
+
+/* Unicode support functions */
+#if _USE_LFN						/* Unicode - OEM code conversion */
+WCHAR ff_convert (WCHAR, UINT);		/* OEM-Unicode bidirectional conversion */
+WCHAR ff_wtoupper (WCHAR);			/* Unicode upper-case conversion */
+#if _USE_LFN == 3					/* Memory functions */
+void* ff_memalloc (UINT);			/* Allocate memory block */
+void ff_memfree (void*);			/* Free memory block */
+#endif
+#endif
+
+/* Sync functions */
+#if _FS_REENTRANT
+int ff_cre_syncobj (BYTE, _SYNC_t*);/* Create a sync object */
+int ff_del_syncobj (_SYNC_t);		/* Delete a sync object */
+int ff_req_grant (_SYNC_t);			/* Lock sync object */
+void ff_rel_grant (_SYNC_t);		/* Unlock sync object */
+#endif
+
+
+
+
+/*--------------------------------------------------------------*/
+/* Flags and offset address                                     */
+
+
+/* File access control and file status flags (FIL.flag) */
+
+#define	FA_READ				0x01
+#define	FA_OPEN_EXISTING	0x00
+#define FA__ERROR			0x80
+
+#if !_FS_READONLY
+#define	FA_WRITE			0x02
+#define	FA_CREATE_NEW		0x04
+#define	FA_CREATE_ALWAYS	0x08
+#define	FA_OPEN_ALWAYS		0x10
+#define FA__WRITTEN			0x20
+#define FA__DIRTY			0x40
+#endif
+
+
+/* FAT sub type (FATFS.fs_type) */
+
+#define FS_FAT12	1
+#define FS_FAT16	2
+#define FS_FAT32	3
+
+
+/* File attribute bits for directory entry */
+
+#define	AM_RDO	0x01	/* Read only */
+#define	AM_HID	0x02	/* Hidden */
+#define	AM_SYS	0x04	/* System */
+#define	AM_VOL	0x08	/* Volume label */
+#define AM_LFN	0x0F	/* LFN entry */
+#define AM_DIR	0x10	/* Directory */
+#define AM_ARC	0x20	/* Archive */
+#define AM_MASK	0x3F	/* Mask of defined bits */
+
+
+/* Fast seek function */
+#define CREATE_LINKMAP	0xFFFFFFFF
+
+
+/*--------------------------------*/
+/* Multi-byte word access macros  */
+
+#if _WORD_ACCESS == 1	/* Enable word access to the FAT structure */
+#define	LD_WORD(ptr)		(WORD)(*(WORD*)(BYTE*)(ptr))
+#define	LD_DWORD(ptr)		(DWORD)(*(DWORD*)(BYTE*)(ptr))
+#define	ST_WORD(ptr,val)	*(WORD*)(BYTE*)(ptr)=(WORD)(val)
+#define	ST_DWORD(ptr,val)	*(DWORD*)(BYTE*)(ptr)=(DWORD)(val)
+#else					/* Use byte-by-byte access to the FAT structure */
+#define	LD_WORD(ptr)		(WORD)(((WORD)*(BYTE*)((ptr)+1)<<8)|(WORD)*(BYTE*)(ptr))
+#define	LD_DWORD(ptr)		(DWORD)(((DWORD)*(BYTE*)((ptr)+3)<<24)|((DWORD)*(BYTE*)((ptr)+2)<<16)|((WORD)*(BYTE*)((ptr)+1)<<8)|*(BYTE*)(ptr))
+#define	ST_WORD(ptr,val)	*(BYTE*)(ptr)=(BYTE)(val); *(BYTE*)((ptr)+1)=(BYTE)((WORD)(val)>>8)
+#define	ST_DWORD(ptr,val)	*(BYTE*)(ptr)=(BYTE)(val); *(BYTE*)((ptr)+1)=(BYTE)((WORD)(val)>>8); *(BYTE*)((ptr)+2)=(BYTE)((DWORD)(val)>>16); *(BYTE*)((ptr)+3)=(BYTE)((DWORD)(val)>>24)
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _FATFS */

src/tests/ffconf.h

@@ -0,0 +1,188 @@
+/*---------------------------------------------------------------------------/
+/  FatFs - FAT file system module configuration file  R0.08a (C)ChaN, 2010
+/----------------------------------------------------------------------------/
+/
+/ CAUTION! Do not forget to make clean the project after any changes to
+/ the configuration options.
+/
+/----------------------------------------------------------------------------*/
+#ifndef _FFCONF
+#define _FFCONF 8255	/* Revision ID */
+
+
+/*---------------------------------------------------------------------------/
+/ Function and Buffer Configurations
+/----------------------------------------------------------------------------*/
+
+#define	_FS_TINY	0		/* 0:Normal or 1:Tiny */
+/* When _FS_TINY is set to 1, FatFs uses the sector buffer in the file system
+/  object instead of the sector buffer in the individual file object for file
+/  data transfer. This reduces memory consumption 512 bytes each file object. */
+
+
+#define _FS_READONLY	0	/* 0:Read/Write or 1:Read only */
+/* Setting _FS_READONLY to 1 defines read only configuration. This removes
+/  writing functions, f_write, f_sync, f_unlink, f_mkdir, f_chmod, f_rename,
+/  f_truncate and useless f_getfree. */
+
+
+#define _FS_MINIMIZE	0	/* 0 to 3 */
+/* The _FS_MINIMIZE option defines minimization level to remove some functions.
+/
+/   0: Full function.
+/   1: f_stat, f_getfree, f_unlink, f_mkdir, f_chmod, f_truncate and f_rename
+/      are removed.
+/   2: f_opendir and f_readdir are removed in addition to 1.
+/   3: f_lseek is removed in addition to 2. */
+
+
+#define	_USE_STRFUNC	0	/* 0:Disable or 1/2:Enable */
+/* To enable string functions, set _USE_STRFUNC to 1 or 2. */
+
+
+#define	_USE_MKFS	0		/* 0:Disable or 1:Enable */
+/* To enable f_mkfs function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */
+
+
+#define	_USE_FORWARD	0	/* 0:Disable or 1:Enable */
+/* To enable f_forward function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */
+
+
+#define	_USE_FASTSEEK	1	/* 0:Disable or 1:Enable */
+/* To enable fast seek feature, set _USE_FASTSEEK to 1. */
+
+
+
+/*---------------------------------------------------------------------------/
+/ Locale and Namespace Configurations
+/----------------------------------------------------------------------------*/
+
+#define _CODE_PAGE	1252
+/* The _CODE_PAGE specifies the OEM code page to be used on the target system.
+/  Incorrect setting of the code page can cause a file open failure.
+/
+/   932  - Japanese Shift-JIS (DBCS, OEM, Windows)
+/   936  - Simplified Chinese GBK (DBCS, OEM, Windows)
+/   949  - Korean (DBCS, OEM, Windows)
+/   950  - Traditional Chinese Big5 (DBCS, OEM, Windows)
+/   1250 - Central Europe (Windows)
+/   1251 - Cyrillic (Windows)
+/   1252 - Latin 1 (Windows)
+/   1253 - Greek (Windows)
+/   1254 - Turkish (Windows)
+/   1255 - Hebrew (Windows)
+/   1256 - Arabic (Windows)
+/   1257 - Baltic (Windows)
+/   1258 - Vietnam (OEM, Windows)
+/   437  - U.S. (OEM)
+/   720  - Arabic (OEM)
+/   737  - Greek (OEM)
+/   775  - Baltic (OEM)
+/   850  - Multilingual Latin 1 (OEM)
+/   858  - Multilingual Latin 1 + Euro (OEM)
+/   852  - Latin 2 (OEM)
+/   855  - Cyrillic (OEM)
+/   866  - Russian (OEM)
+/   857  - Turkish (OEM)
+/   862  - Hebrew (OEM)
+/   874  - Thai (OEM, Windows)
+/	1    - ASCII only (Valid for non LFN cfg.)
+*/
+
+
+#define	_USE_LFN	1		/* 0 to 3 */
+#define	_MAX_LFN	255		/* Maximum LFN length to handle (12 to 255) */
+/* The _USE_LFN option switches the LFN support.
+/
+/   0: Disable LFN feature. _MAX_LFN and _LFN_UNICODE have no effect.
+/   1: Enable LFN with static working buffer on the BSS. Always NOT reentrant.
+/   2: Enable LFN with dynamic working buffer on the STACK.
+/   3: Enable LFN with dynamic working buffer on the HEAP.
+/
+/  The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. To enable LFN,
+/  Unicode handling functions ff_convert() and ff_wtoupper() must be added
+/  to the project. When enable to use heap, memory control functions
+/  ff_memalloc() and ff_memfree() must be added to the project. */
+
+
+#define	_LFN_UNICODE	0	/* 0:ANSI/OEM or 1:Unicode */
+/* To switch the character code set on FatFs API to Unicode,
+/  enable LFN feature and set _LFN_UNICODE to 1. */
+
+
+#define _FS_RPATH	2		/* 0 to 2 */
+/* The _FS_RPATH option configures relative path feature.
+/
+/   0: Disable relative path feature and remove related functions.
+/   1: Enable relative path. f_chdrive() and f_chdir() are available.
+/   2: f_getcwd() is available in addition to 1.
+/
+/  Note that output of the f_readdir fnction is affected by this option. */
+
+
+
+/*---------------------------------------------------------------------------/
+/ Physical Drive Configurations
+/----------------------------------------------------------------------------*/
+
+#define _VOLUMES	1
+/* Number of volumes (logical drives) to be used. */
+
+
+#define	_MAX_SS		512		/* 512, 1024, 2048 or 4096 */
+/* Maximum sector size to be handled.
+/  Always set 512 for memory card and hard disk but a larger value may be
+/  required for floppy disk (512/1024) and optical disk (512/2048).
+/  When _MAX_SS is larger than 512, GET_SECTOR_SIZE command must be implememted
+/  to the disk_ioctl function. */
+
+
+#define	_MULTI_PARTITION	0	/* 0:Single partition or 1:Multiple partition */
+/* When set to 0, each volume is bound to the same physical drive number and
+/ it can mount only first primaly partition. When it is set to 1, each volume
+/ is tied to the partitions listed in VolToPart[]. */
+
+
+#define	_USE_ERASE	0	/* 0:Disable or 1:Enable */
+/* To enable sector erase feature, set _USE_ERASE to 1. */
+
+
+
+/*---------------------------------------------------------------------------/
+/ System Configurations
+/----------------------------------------------------------------------------*/
+
+#define _WORD_ACCESS	0	/* 0 or 1 */
+/* Set 0 first and it is always compatible with all platforms. The _WORD_ACCESS
+/  option defines which access method is used to the word data on the FAT volume.
+/
+/   0: Byte-by-byte access.
+/   1: Word access. Do not choose this unless following condition is met.
+/
+/  When the byte order on the memory is big-endian or address miss-aligned word
+/  access results incorrect behavior, the _WORD_ACCESS must be set to 0.
+/  If it is not the case, the value can also be set to 1 to improve the
+/  performance and code size. */
+
+
+/* Include a header file here to define sync object types on the O/S */
+/* #include <windows.h>, <ucos_ii.h.h>, <semphr.h> or ohters. */
+
+#define _FS_REENTRANT	0		/* 0:Disable or 1:Enable */
+#define _FS_TIMEOUT		1000	/* Timeout period in unit of time ticks */
+#define	_SYNC_t			HANDLE	/* O/S dependent type of sync object. e.g. HANDLE, OS_EVENT*, ID and etc.. */
+
+/* The _FS_REENTRANT option switches the reentrancy of the FatFs module.
+/
+/   0: Disable reentrancy. _SYNC_t and _FS_TIMEOUT have no effect.
+/   1: Enable reentrancy. Also user provided synchronization handlers,
+/      ff_req_grant, ff_rel_grant, ff_del_syncobj and ff_cre_syncobj
+/      function must be added to the project. */
+
+
+#define	_FS_SHARE	0	/* 0:Disable or >=1:Enable */
+/* To enable file shareing feature, set _FS_SHARE to 1 or greater. The value
+   defines how many files can be opened simultaneously. */
+
+
+#endif /* _FFCONFIG */

src/tests/fileops.c

@@ -0,0 +1,117 @@
+/* sd2snes - SD card based universal cartridge for the SNES
+   Copyright (C) 2009-2010 Maximilian Rehkopf <otakon@gmx.net>
+   AVR firmware portion
+
+   Inspired by and based on code from sd2iec, written by Ingo Korb et al.
+   See sdcard.c|h, config.h.
+
+   FAT file system access based on code by ChaN, Jim Brain, Ingo Korb,
+   see ff.c|h.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; version 2 of the License only.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+   fileops.c: simple file access functions
+*/
+
+#include "config.h"
+#include "uart.h"
+#include "ff.h"
+#include "fileops.h"
+#include "diskio.h"
+
+/*
+WCHAR ff_convert(WCHAR w, UINT dir) {
+  return w;
+}*/
+
+int newcard;
+
+void file_init() {
+  file_res=f_mount(0, &fatfs);
+  newcard = 0;
+}
+
+void file_reinit(void) {
+  disk_init();
+  file_init();
+}
+
+FRESULT dir_open_by_filinfo(DIR* dir, FILINFO* fno) {
+  return l_opendirbycluster(&fatfs, dir, (TCHAR*)"", fno->clust);
+}
+
+void file_open_by_filinfo(FILINFO* fno) {
+  file_res = l_openfilebycluster(&fatfs, &file_handle, (TCHAR*)"", fno->clust, fno->fsize);
+}
+
+void file_open(uint8_t* filename, BYTE flags) {
+  if (disk_state == DISK_CHANGED) {
+    file_reinit();
+    newcard = 1;
+  }
+  file_res = f_open(&file_handle, (TCHAR*)filename, flags);
+  file_block_off = sizeof(file_buf);
+  file_block_max = sizeof(file_buf);
+  file_status = file_res ? FILE_ERR : FILE_OK;
+}
+
+void file_close() {
+  file_res = f_close(&file_handle);
+}
+
+void file_seek(uint32_t offset) {
+  file_res = f_lseek(&file_handle, (DWORD)offset);
+}
+
+UINT file_read() {
+  UINT bytes_read;
+  file_res = f_read(&file_handle, file_buf, sizeof(file_buf), &bytes_read);
+  return bytes_read;
+}
+
+UINT file_write() {
+  UINT bytes_written;
+  file_res = f_write(&file_handle, file_buf, sizeof(file_buf), &bytes_written);
+  if(bytes_written < sizeof(file_buf)) {
+    printf("wrote less than expected - card full?\n");
+  }
+  return bytes_written;
+}
+
+UINT file_readblock(void* buf, uint32_t addr, uint16_t size) {
+  UINT bytes_read;
+  file_res = f_lseek(&file_handle, addr);
+  if(file_handle.fptr != addr) {
+    return 0;
+  }
+  file_res = f_read(&file_handle, buf, size, &bytes_read);
+  return bytes_read;
+}
+
+UINT file_writeblock(void* buf, uint32_t addr, uint16_t size) {
+  UINT bytes_written;
+  file_res = f_lseek(&file_handle, addr);
+  if(file_res) return 0;
+  file_res = f_write(&file_handle, buf, size, &bytes_written);
+  return bytes_written;
+}
+
+uint8_t file_getc() {
+  if(file_block_off == file_block_max) {
+    file_block_max = file_read();
+    if(file_block_max == 0) file_status = FILE_EOF;
+    file_block_off = 0;
+  }
+  return file_buf[file_block_off++];
+}

src/tests/fileops.h

@@ -0,0 +1,54 @@
+/* sd2snes - SD card based universal cartridge for the SNES
+   Copyright (C) 2009-2010 Maximilian Rehkopf <otakon@gmx.net>
+   AVR firmware portion
+
+   Inspired by and based on code from sd2iec, written by Ingo Korb et al.
+   See sdcard.c|h, config.h.
+
+   FAT file system access based on code by ChaN, Jim Brain, Ingo Korb,
+   see ff.c|h.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; version 2 of the License only.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+   fileops.h: simple file access functions
+*/
+
+#ifndef FILEOPS_H
+#define FILEOPS_H
+#include <arm/NXP/LPC17xx/LPC17xx.h>
+#include "ff.h"
+
+enum filestates { FILE_OK=0, FILE_ERR, FILE_EOF };
+
+BYTE file_buf[512];
+FATFS fatfs;
+FIL file_handle;
+FRESULT file_res;
+uint8_t file_lfn[258];
+uint16_t file_block_off, file_block_max;
+enum filestates file_status;
+
+void file_init(void);
+void file_open(uint8_t* filename, BYTE flags);
+FRESULT dir_open_by_filinfo(DIR* dir, FILINFO* fno_param);
+void file_open_by_filinfo(FILINFO* fno);
+void file_close(void);
+void file_seek(uint32_t offset);
+UINT file_read(void);
+UINT file_write(void);
+UINT file_readblock(void* buf, uint32_t addr, uint16_t size);
+UINT file_writeblock(void* buf, uint32_t addr, uint16_t size);
+
+uint8_t file_getc(void);
+#endif

src/tests/filetypes.c

@@ -0,0 +1,315 @@
+/* sd2snes - SD card based universal cartridge for the SNES
+   Copyright (C) 2009-2010 Maximilian Rehkopf <otakon@gmx.net>
+   AVR firmware portion
+
+   Inspired by and based on code from sd2iec, written by Ingo Korb et al.
+   See sdcard.c|h, config.h.
+
+   FAT file system access based on code by ChaN, Jim Brain, Ingo Korb,
+   see ff.c|h.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; version 2 of the License only.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+   filetypes.c: directory scanning and file type detection
+*/
+
+#include <string.h>
+#include "config.h"
+#include "uart.h"
+#include "filetypes.h"
+#include "ff.h"
+#include "smc.h"
+#include "fileops.h"
+#include "crc32.h"
+#include "memory.h"
+#include "led.h"
+#include "sort.h"
+
+uint16_t scan_flat(const char* path) {
+  DIR dir;
+  FRESULT res;
+  FILINFO fno;
+  fno.lfname = NULL;
+  res = f_opendir(&dir, (TCHAR*)path);
+  uint16_t numentries = 0;
+  if (res == FR_OK) {
+    for (;;) {
+      res = f_readdir(&dir, &fno);
+      if(res != FR_OK || fno.fname[0] == 0)break;
+      numentries++;
+    }
+  }
+  return numentries;
+}
+
+uint32_t scan_dir(char* path, FILINFO* fno_param, char mkdb, uint32_t this_dir_tgt) {
+  DIR dir;
+  FILINFO fno;
+  FRESULT res;
+  uint8_t len;
+  TCHAR* fn;
+  static unsigned char depth = 0;
+  static uint32_t crc;
+  static uint32_t db_tgt;
+  static uint32_t next_subdir_tgt;
+  static uint32_t parent_tgt;
+  static uint32_t dir_end = 0;
+  static uint8_t was_empty = 0;
+  uint32_t dir_tgt;
+  uint16_t numentries;
+  uint32_t dirsize;
+  uint8_t pass = 0;
+  char buf[7];
+  char *size_units[3] = {" ", "k", "M"};
+  uint32_t entry_fsize;
+  uint8_t entry_unit_idx;
+
+  dir_tgt = this_dir_tgt;
+  if(depth==0) {
+    crc = 0;
+    db_tgt = SRAM_DB_ADDR+0x10;
+    dir_tgt = SRAM_DIR_ADDR;
+    next_subdir_tgt = SRAM_DIR_ADDR;
+    this_dir_tgt = SRAM_DIR_ADDR;
+    parent_tgt = 0;
+    printf("root dir @%lx\n", dir_tgt);
+  }
+
+  fno.lfsize = 255;
+  fno.lfname = (TCHAR*)file_lfn;
+  numentries=0;
+  for(pass = 0; pass < 2; pass++) {
+    if(pass) {
+      dirsize = 4*(numentries);
+      next_subdir_tgt += dirsize + 4;
+      if(parent_tgt) next_subdir_tgt += 4;
+      if(next_subdir_tgt > dir_end) {
+        dir_end = next_subdir_tgt;
+      }
+//      printf("path=%s depth=%d ptr=%lx entries=%d parent=%lx next subdir @%lx\n", path, depth, db_tgt, numentries, parent_tgt, next_subdir_tgt);
+      if(mkdb) {
+//        printf("d=%d Saving %lx to Address %lx  [end]\n", depth, 0L, next_subdir_tgt - 4);
+        sram_writelong(0L, next_subdir_tgt - 4);
+      }
+    }
+    if(fno_param) {
+      res = dir_open_by_filinfo(&dir, fno_param);
+    } else {
+      res = f_opendir(&dir, path);
+    }
+    if (res == FR_OK) {
+      if(pass && parent_tgt && mkdb) {
+        /* write backlink to parent dir
+           switch to next bank if record does not fit in current bank */
+        if((db_tgt&0xffff) > ((0x10000-(sizeof(next_subdir_tgt)+sizeof(len)+4))&0xffff)) {
+          printf("switch! old=%lx ", db_tgt);
+          db_tgt &= 0xffff0000;
+          db_tgt += 0x00010000;
+          printf("new=%lx\n", db_tgt);
+        }
+//        printf("writing link to parent, %lx to address %lx [../]\n", parent_tgt-SRAM_MENU_ADDR, db_tgt);
+        sram_writelong((parent_tgt-SRAM_MENU_ADDR), db_tgt);
+        sram_writebyte(0, db_tgt+sizeof(next_subdir_tgt));
+        sram_writeblock("../\0", db_tgt+sizeof(next_subdir_tgt)+sizeof(len), 4);
+        sram_writelong((db_tgt-SRAM_MENU_ADDR)|((uint32_t)0x81<<24), dir_tgt);
+        db_tgt += sizeof(next_subdir_tgt)+sizeof(len)+4;
+        dir_tgt += 4;
+      }
+      len = strlen((char*)path);
+      for (;;) {
+//        toggle_read_led();
+        res = f_readdir(&dir, &fno);
+        if (res != FR_OK || fno.fname[0] == 0) {
+          if(pass) {
+            if(!numentries) was_empty=1;
+          }
+          break;
+        }
+        fn = *fno.lfname ? fno.lfname : fno.fname;
+        if ((*fn == '.') || !(memcmp(fn, SYS_DIR_NAME, sizeof(SYS_DIR_NAME)))) continue;
+        if (fno.fattrib & AM_DIR) {
+          depth++;
+          if(depth < FS_MAX_DEPTH) {
+            numentries++;
+            if(pass) {
+              path[len]='/';
+              strncpy(path+len+1, (char*)fn, sizeof(fs_path)-len);
+              if(mkdb) {
+                uint16_t pathlen = strlen(path);
+//                printf("d=%d Saving %lx to Address %lx  [dir]\n", depth, db_tgt, dir_tgt);
+                /* save element:
+                   - path name
+                   - pointer to sub dir structure */
+                if((db_tgt&0xffff) > ((0x10000-(sizeof(next_subdir_tgt) + sizeof(len) + pathlen + 2))&0xffff)) {
+                  printf("switch! old=%lx ", db_tgt);
+                  db_tgt &= 0xffff0000;
+                  db_tgt += 0x00010000;
+                  printf("new=%lx\n", db_tgt);
+                }
+//                printf("    Saving dir descriptor to %lx tgt=%lx, path=%s\n", db_tgt, next_subdir_tgt, path);
+                /* write element pointer to current dir structure */
+                sram_writelong((db_tgt-SRAM_MENU_ADDR)|((uint32_t)0x80<<24), dir_tgt);
+                /* save element:
+                   - path name
+                   - pointer to sub dir structure */
+                sram_writelong((next_subdir_tgt-SRAM_MENU_ADDR), db_tgt);
+                sram_writebyte(len+1, db_tgt+sizeof(next_subdir_tgt));
+                sram_writeblock(path, db_tgt+sizeof(next_subdir_tgt)+sizeof(len), pathlen);
+                sram_writeblock("/\0", db_tgt + sizeof(next_subdir_tgt) + sizeof(len) + pathlen, 2);
+                db_tgt += sizeof(next_subdir_tgt) + sizeof(len) + pathlen + 2;
+              }
+              parent_tgt = this_dir_tgt;
+              scan_dir(path, &fno, mkdb, next_subdir_tgt);
+              dir_tgt += 4;
+              was_empty = 0;
+            }
+          }
+          depth--;
+          path[len]=0;
+        } else {
+          SNES_FTYPE type = determine_filetype((char*)fn);
+          if(type != TYPE_UNKNOWN) {
+            numentries++;
+            if(pass) {
+              if(mkdb) {
+/*                snes_romprops_t romprops; */
+                path[len]='/';
+                strncpy(path+len+1, (char*)fn, sizeof(fs_path)-len);
+                uint16_t pathlen = strlen(path);
+                switch(type) {
+                  case TYPE_IPS:
+                  case TYPE_SMC:
+/*                    file_open_by_filinfo(&fno);
+                    if(file_res){
+                      printf("ZOMG NOOOO %d\n", file_res);
+                    }
+                    smc_id(&romprops);
+                    file_close(); */
+
+                    /* write element pointer to current dir structure */
+                    DBG_FS printf("d=%d Saving %lX to Address %lX  [file %s]\n", depth, db_tgt, dir_tgt, path);
+                    if((db_tgt&0xffff) > ((0x10000-(sizeof(len) + pathlen + sizeof(buf)-1 + 1))&0xffff)) {
+                      printf("switch! old=%lx ", db_tgt);
+                      db_tgt &= 0xffff0000;
+                      db_tgt += 0x00010000;
+                      printf("new=%lx\n", db_tgt);
+                    }
+                    sram_writelong((db_tgt-SRAM_MENU_ADDR) | ((uint32_t)type << 24), dir_tgt);
+                    dir_tgt += 4;
+                    /* save element:
+                        - index of last slash character
+                        - file name
+                        - file size */
+/*                  sram_writeblock((uint8_t*)&romprops, db_tgt, sizeof(romprops)); */
+                    entry_fsize = fno.fsize;
+                    entry_unit_idx = 0;
+                    while(entry_fsize > 9999) {
+                      entry_fsize >>= 10;
+                      entry_unit_idx++;
+                    }
+                    snprintf(buf, sizeof(buf), "% 5ld", entry_fsize);
+                    strncat(buf, size_units[entry_unit_idx], 1);
+                    sram_writeblock(buf, db_tgt, sizeof(buf)-1);
+                    sram_writebyte(len+1, db_tgt + sizeof(buf)-1);
+                    sram_writeblock(path, db_tgt + sizeof(len) + sizeof(buf)-1, pathlen + 1);
+//                    sram_writelong(fno.fsize, db_tgt + sizeof(len) + pathlen + 1);
+                    db_tgt += sizeof(len) + pathlen + sizeof(buf)-1 + 1;
+                    break;
+                  case TYPE_UNKNOWN:
+                  default:
+                   break;
+                }
+                path[len]=0;
+/*              printf("%s ", path);
+                _delay_ms(30); */
+              }
+            } else {
+              TCHAR* fn2 = fn;
+              while(*fn2 != 0) {
+                crc += crc32_update(crc, *((unsigned char*)fn2++));
+              }
+            }
+          }
+/*        printf("%s/%s\n", path, fn);
+          _delay_ms(50); */
+        }
+      }
+    } else uart_putc(0x30+res);
+  }
+//  printf("db_tgt=%lx dir_end=%lx\n", db_tgt, dir_end);
+  sram_writelong(db_tgt, SRAM_DB_ADDR+4);
+  sram_writelong(dir_end, SRAM_DB_ADDR+8);
+  return crc;
+}
+
+
+SNES_FTYPE determine_filetype(char* filename) {
+  char* ext = strrchr(filename, '.');
+  if(ext == NULL)
+    return TYPE_UNKNOWN;
+  if(  (!strcasecmp(ext+1, "SMC"))
+    ||(!strcasecmp(ext+1, "SFC"))
+     ||(!strcasecmp(ext+1, "FIG"))
+     ||(!strcasecmp(ext+1, "BS"))
+    ) {
+    return TYPE_SMC;
+  }
+  if(  (!strcasecmp(ext+1, "IPS"))
+     ||(!strcasecmp(ext+1, "UPS"))
+    ) {
+    return TYPE_IPS;
+  }
+  /* later
+  if(!strcasecmp_P(ext+1, PSTR("SRM"))) {
+    return TYPE_SRM;
+  }
+  if(!strcasecmp_P(ext+1, PSTR("SPC"))) {
+    return TYPE_SPC;
+  }*/
+  return TYPE_UNKNOWN;
+}
+
+FRESULT get_db_id(uint32_t* id) {
+  file_open((uint8_t*)"/sd2snes/sd2snes.db", FA_READ);
+  if(file_res == FR_OK) {
+    file_readblock(id, 0, 4);
+/* XXX */// *id=0xdead;
+    file_close();
+  } else {
+    *id=0xdeadbeef;
+  }
+  return file_res;
+}
+
+int get_num_dirent(uint32_t addr) {
+  int result = 0;
+  while(sram_readlong(addr+result*4)) {
+    result++;
+  }
+  return result;
+}
+
+void sort_all_dir(uint32_t endaddr) {
+  uint32_t entries = 0;
+  uint32_t current_base = SRAM_DIR_ADDR;
+  while(current_base<(endaddr)) {
+    while(sram_readlong(current_base+entries*4)) {
+      entries++;
+    }
+    printf("sorting dir @%lx, entries: %ld\n", current_base, entries);
+    sort_dir(current_base, entries);
+    current_base += 4*entries + 4;
+    entries = 0;
+  }
+}