Merge branch 'develop' into merging

Conflicts:
	src/bootldr/fileops.h
	src/bootldr/iap.c
	src/fpga_spi.c
	src/memory.c
	src/smc.c
	verilog/sd2snes/address.v

.gitignore

@@ -0,0 +1,22 @@
+*.cod
+*.hex
+*.lst
+*.o
+*.diff
+.DS_Store
+*.o65
+*.ips
+*.bin
+*.map
+*.o.d
+*.log
+*.smc
+*.sfc
+*~
+*.old
+*.elf
+*.img
+autoconf.h
+utils/rle
+utils/derle
+*.bit

CHANGELOG

@@ -15,6 +15,7 @@ v0.1.1a (bugfix release)
 v0.1.2
 ======
 
+ * New menu entry: "System Information"
  * Auto region override (eliminate "This game pak is not designed..." messages)
  * Improved mapper detection (fixes Batman vs. Joker and many PD ROMs)
  * Improved data streaming performance
@@ -22,3 +23,74 @@ v0.1.2
  * A and B buttons swapped in menu to match common key mappings
  * Fixes:
    - MSU1: Stop audio playback on end of audio file
+
+
+v0.1.3
+======
+
+ * Updated logo gfx with new version from klaptra
+ * Updated font to distinguish between 1 and I
+ * Menu layout adjusted to move status line up by 4 scanlines
+ * Run previously loaded game by pressing Start in the menu
+ * Auto-scroll file names that do not fit the screen
+ * SD access time measurement on System Information screen (takes a while!)
+ * Cx4 memory map: mirror ROM to 40-7e/c0-ff (fixes MMX3 Zero patch)
+ * Some FPGA configuration error detection (mainly useful for hardware diag)
+ * Fixes:
+   - FPGA-side SD clock pullup (increases reliability with some cards)
+
+
+v0.1.4
+======
+
+ * SPC Player (contributed by necronomfive/blargg)
+ * System Information screen now shows CPU/PPU revision (contributed by necronomfive)
+ * Satellaview: basic data transmission packet support (makes some more games boot, thanks to LuigiBlood for assistance and sample data packets)
+ * Number of supported files increased to 50000 per card / 16380 per directory
+ * Slight speedup of menu text rendering
+ * Reduce load time of menu
+ * Adjust Cx4 timing to be more faithful
+   (Mega Man now defeats the boss in attract mode in Mega Man X2)
+ * adapt ROM mirroring size to file size if header information is invalid
+   (fixes Super Noah's Ark 3D, possibly others)
+ * MSU1 interface changes suggested by byuu:
+   - Data offset 0 and audio track 0 are automatically requested on reset.
+     This causes the busy flags to become 0 shortly after reset/startup.
+   - $2000 bit 3 is now "audio error", becomes valid after "audio busy" -> 0
+     set when an error occurred while preparing playback of the requested audio track
+ * write LED stays on when SRAM content changes constantly
+ * Fixes:
+   - fix empty save files on FAT16 / incorrect free cluster count on FAT32
+   - correct directory sorting (force parent directory at top of list)
+   - fix text corruption when entering a directory with a scrollable name
+   - fix files/dirs count in system information
+   - make 'sd2snes' directory hiding case-insensitive
+   - improve DAC I²S timing
+   - fix occasional palette corruption in menu
+   - fix SD clock glitch on ROM loading (occasional glitches/crashes)
+   - fix memory write timing on ROM loading (occasional glitches/crashes)
+   - fix SPI timing (ROMs not loading; System Information not working)
+   - properly synchronize SNES control signals (occasional glitches/crashes)
+   - fix floating IRQ output (occasional glitches/slowdowns)
+
+
+v0.1.4a (bugfix release)
+========================
+
+ * Fix DMA initialization in the menu (could cause sprite corruption in some games)
+
+
+v0.1.5
+======
+
+ * Sort directories by entire file name instead of first 20 characters only
+ * Correctly map SRAM larger than 8192 bytes (HiROM) / 32768 bytes (LoROM)
+   (fixes Dezaemon, Ongaku Tsukuuru - Kanadeeru)
+ * SPC player: fix soft fade-in (first note cut off) on S-APU consoles
+   (1CHIP / some Jr.)
+ * More accurate BS-X memory map
+ * Ignore input from non-standard controllers (Super Scope, Mouse etc.)
+ * Fixes:
+   - minor memory access timing tweaks
+     (should help with occasional glitches on some systems)
+

pcb/kicad/RevE/sd2snes.brd

@@ -1,4 +1,4 @@
-PCBNEW-BOARD Version 1 date Fri 02 Dec 2011 02:55:43 PM CET
+PCBNEW-BOARD Version 1 date Mon 30 Jan 2012 04:25:38 PM CET
 
 # Created by Pcbnew(2011-07-02 BZR 2664)-stable
 
@@ -21,7 +21,7 @@ $EndGENERAL
 $SHEETDESCR
 Sheet A4 11700 8267
 Title "sd2snes Mark II"
-Date "2 dec 2011"
+Date "30 jan 2012"
 Rev "C2"
 Comp "Maximilian Rehkopf"
 Comment1 ""
@@ -71,7 +71,7 @@ PadSize 79 690
 PadDrill 0
 Pad2MaskClearance 40
 AuxiliaryAxisOrg 0 0
-PcbPlotParams (pcbplotparams (layerselection 2097152) (usegerberextensions true) (excludeedgelayer false) (linewidth 79) (plotframeref false) (viasonmask false) (mode 1) (useauxorigin false) (hpglpennumber 1) (hpglpenspeed 20) (hpglpendiameter 15) (hpglpenoverlay 0) (pscolor true) (psnegative false) (psa4output false) (plotreference true) (plotvalue true) (plotothertext true) (plotinvisibletext true) (padsonsilk false) (subtractmaskfromsilk true) (outputformat 2) (mirror false) (drillshape 2) (scaleselection 1) (outputdirectory ""))
+PcbPlotParams (pcbplotparams (layerselection 284196865) (usegerberextensions true) (excludeedgelayer true) (linewidth 79) (plotframeref false) (viasonmask false) (mode 1) (useauxorigin false) (hpglpennumber 1) (hpglpenspeed 20) (hpglpendiameter 15) (hpglpenoverlay 0) (pscolor true) (psnegative false) (psa4output false) (plotreference true) (plotvalue false) (plotothertext false) (plotinvisibletext false) (padsonsilk false) (subtractmaskfromsilk true) (outputformat 1) (mirror false) (drillshape 2) (scaleselection 1) (outputdirectory ""))
 $EndSETUP
 
 $EQUIPOT
@@ -12830,7 +12830,7 @@ Po 45815 24905 700 700 120 0
 De 20 0 0 Normal C
 $EndTEXTPCB
 $TEXTPCB
-Te "©2009 - 2011 M. Rehkopf"
+Te "©2009 - 2012 ikari_01 "
 Po 44000 27540 500 500 75 0
 De 20 0 0 Normal C
 $EndTEXTPCB

pcb/kicad/RevE2/fpga.sch

@@ -1,4 +1,4 @@
-EESchema Schematic File Version 2  date Mon 26 Dec 2011 09:56:14 PM CET
+EESchema Schematic File Version 2  date Mon 02 Jan 2012 11:27:18 PM CET
 LIBS:power
 LIBS:device
 LIBS:transistors
@@ -40,13 +40,14 @@ LIBS:cs4344
 LIBS:double_sch_kcom
 LIBS:usb_minib
 LIBS:mic23250
+LIBS:sd2snes-cache
 EELAYER 25  0
 EELAYER END
 $Descr A3 16535 11700
 encoding utf-8
 Sheet 6 6
 Title "sd2snes Mark II"
-Date "26 dec 2011"
+Date "2 jan 2012"
 Rev "E2"
 Comp "Maximilian Rehkopf"
 Comment1 ""

pcb/kicad/RevE2/mcu.sch

@@ -1,4 +1,4 @@
-EESchema Schematic File Version 2  date Mon 26 Dec 2011 09:56:13 PM CET
+EESchema Schematic File Version 2  date Mon 02 Jan 2012 11:27:18 PM CET
 LIBS:power
 LIBS:device
 LIBS:transistors
@@ -40,13 +40,14 @@ LIBS:cs4344
 LIBS:double_sch_kcom
 LIBS:usb_minib
 LIBS:mic23250
+LIBS:sd2snes-cache
 EELAYER 25  0
 EELAYER END
 $Descr A4 11700 8267
 encoding utf-8
 Sheet 4 6
 Title "sd2snes Mark II"
-Date "26 dec 2011"
+Date "2 jan 2012"
 Rev "E2"
 Comp "Maximilian Rehkopf"
 Comment1 ""
@@ -578,7 +579,7 @@ USB_SWCONN
 Text GLabel 2700 4200 0    50   Output ~ 0
 USB_SWCONN
 Text Notes 750  1700 0    50   ~ 0
-or 3000mcd LEDs (10k for R401-403)
+or super bright LEDs (10k for R401-403)\nuse 6.35mm LED spacers
 NoConn ~ 6700 5500
 NoConn ~ 6700 5400
 NoConn ~ 6700 5300

pcb/kicad/RevE2/memory.sch

@@ -1,4 +1,4 @@
-EESchema Schematic File Version 2  date Mon 26 Dec 2011 09:56:13 PM CET
+EESchema Schematic File Version 2  date Mon 02 Jan 2012 11:27:18 PM CET
 LIBS:power
 LIBS:device
 LIBS:transistors
@@ -40,13 +40,14 @@ LIBS:cs4344
 LIBS:double_sch_kcom
 LIBS:usb_minib
 LIBS:mic23250
+LIBS:sd2snes-cache
 EELAYER 25  0
 EELAYER END
 $Descr A4 11700 8267
 encoding utf-8
 Sheet 3 6
 Title "sd2snes Mark II"
-Date "26 dec 2011"
+Date "2 jan 2012"
 Rev "E2"
 Comp "Maximilian Rehkopf"
 Comment1 ""

pcb/kicad/RevE2/padreduce.sh

@@ -2,9 +2,9 @@ cp "$1" "$1".bak
 
 sed -e 's/^%ADD\(..\)R/%ADD\1O/g' < "$1" > "$1".tmp1
 
-grep ^%ADD..O "$1".tmp1 | while read ln; do LS=${ln:0:8}; X=${ln:8:8}; Y=${ln:17:8}; X2=`echo $X-.002 | bc -l`; Y2=`echo $Y-.002 | bc -l`; echo $LS`printf '%01.6f' $X2`X`printf '%01.6f' $Y2`*%; done > "$1".tmp2
+grep ^%ADD..O "$1".tmp1 | while read ln; do LS=${ln:0:8}; X=${ln:8:8}; Y=${ln:17:8}; X2=`echo $X-.001 | bc -l`; Y2=`echo $Y-.001 | bc -l`; echo $LS`printf '%01.6f' $X2`X`printf '%01.6f' $Y2`*%; done > "$1".tmp2
 
-grep ^%ADD..C "$1".tmp1 | while read ln; do LS=${ln:0:8}; X=${ln:8:8}; X2=`echo $X-.002 | bc -l`; echo $LS`printf '%01.6f' $X2`*%; done >> "$1".tmp2
+grep ^%ADD..C "$1".tmp1 | while read ln; do LS=${ln:0:8}; X=${ln:8:8}; X2=`echo $X-.001 | bc -l`; echo $LS`printf '%01.6f' $X2`*%; done >> "$1".tmp2
 
 while read ln; do echo "$ln" | grep '^%ADD' >/dev/null && break; echo "$ln"; done < "$1".tmp1 > "$1"
 

pcb/kicad/RevE2/pwr_misc.sch

@@ -1,4 +1,4 @@
-EESchema Schematic File Version 2  date Mon 26 Dec 2011 09:56:13 PM CET
+EESchema Schematic File Version 2  date Mon 02 Jan 2012 11:27:18 PM CET
 LIBS:power
 LIBS:device
 LIBS:transistors
@@ -40,13 +40,14 @@ LIBS:cs4344
 LIBS:double_sch_kcom
 LIBS:usb_minib
 LIBS:mic23250
+LIBS:sd2snes-cache
 EELAYER 25  0
 EELAYER END
 $Descr A4 11700 8267
 encoding utf-8
 Sheet 5 6
 Title "sd2snes Mark II"
-Date "26 dec 2011"
+Date "2 jan 2012"
 Rev "E2"
 Comp "Maximilian Rehkopf"
 Comment1 ""
@@ -79,19 +80,13 @@ Wire Wire Line
 	1750 4250 1750 4050
 Connection ~ 4100 2600
 Wire Wire Line
-	4100 2800 4100 2600
-Wire Wire Line
-	4100 2600 4100 2400
+	4100 2800 4100 2400
 Wire Wire Line
 	3250 2600 3350 2600
 Wire Wire Line
 	1600 3200 1600 3450
 Wire Wire Line
-	1850 2600 1750 2600
-Wire Wire Line
-	1750 2600 1600 2600
-Wire Wire Line
-	1600 2600 1000 2600
+	1850 2600 1000 2600
 Wire Wire Line
 	1000 2600 1000 2400
 Wire Wire Line
@@ -134,17 +129,13 @@ Wire Notes Line
 	4550 500  4550 7750
 Connection ~ 9750 4750
 Wire Wire Line
-	9700 4750 9750 4750
-Wire Wire Line
-	9750 4750 9800 4750
+	9700 4750 9800 4750
 Wire Wire Line
 	9750 5400 9750 5500
 Wire Wire Line
 	9150 5500 9150 5400
 Wire Wire Line
-	9150 4900 9150 4750
-Wire Wire Line
-	9150 4750 9150 4600
+	9150 4900 9150 4600
 Wire Wire Line
 	8300 5000 8300 4750
 Wire Wire Line
@@ -155,9 +146,7 @@ Wire Wire Line
 	10350 3900 10350 3700
 Connection ~ 10350 4400
 Wire Wire Line
-	10350 4500 10350 4400
-Wire Wire Line
-	10350 4400 10350 4300
+	10350 4500 10350 4300
 Connection ~ 10050 3700
 Wire Wire Line
 	9650 3900 9650 3800
@@ -174,9 +163,7 @@ Wire Wire Line
 Wire Wire Line
 	11100 2400 11100 2300
 Wire Wire Line
-	9600 1800 9000 1800
-Wire Wire Line
-	9000 1800 8150 1800
+	9600 1800 8150 1800
 Wire Wire Line
 	6700 2100 6350 2100
 Wire Wire Line
@@ -202,15 +189,9 @@ Wire Wire Line
 Wire Wire Line
 	3950 5300 3950 5500
 Wire Wire Line
-	3950 5500 3500 5500
+	3950 5500 3250 5500
 Wire Wire Line
-	3500 5500 3250 5500
-Wire Wire Line
-	1850 5500 1750 5500
-Wire Wire Line
-	1750 5500 1600 5500
-Wire Wire Line
-	1600 5500 1150 5500
+	1850 5500 1150 5500
 Wire Wire Line
 	1150 5500 1150 5300
 Wire Wire Line
@@ -221,15 +202,9 @@ Connection ~ 1750 5500
 Wire Wire Line
 	1150 6650 1150 6850
 Wire Wire Line
-	1150 6850 1600 6850
+	1150 6850 1850 6850
 Wire Wire Line
-	1600 6850 1750 6850
-Wire Wire Line
-	1750 6850 1850 6850
-Wire Wire Line
-	3250 6850 3500 6850
-Wire Wire Line
-	3500 6850 3950 6850
+	3250 6850 3950 6850
 Wire Wire Line
 	3950 6850 3950 6650
 Wire Wire Line
@@ -248,23 +223,15 @@ Wire Wire Line
 Wire Wire Line
 	6700 1800 6350 1800
 Wire Wire Line
-	8150 1400 9200 1400
-Wire Wire Line
-	9200 1400 9350 1400
-Wire Wire Line
-	9350 1400 9600 1400
+	8150 1400 9600 1400
 Wire Wire Line
 	8150 2100 8600 2100
 Wire Wire Line
 	11100 1900 11100 1800
 Wire Wire Line
-	10150 6350 10150 6450
+	10150 6350 10150 6550
 Wire Wire Line
-	10150 6450 10150 6550
-Wire Wire Line
-	10150 5750 10150 5850
-Wire Wire Line
-	10150 5850 10150 5950
+	10150 5750 10150 5950
 Wire Wire Line
 	6300 7000 6100 7000
 Wire Wire Line
@@ -274,9 +241,7 @@ Wire Wire Line
 Wire Wire Line
 	9650 4300 9650 4500
 Wire Wire Line
-	10350 3700 10050 3700
-Wire Wire Line
-	10050 3700 7250 3700
+	10350 3700 7250 3700
 Wire Wire Line
 	10050 4300 10050 4400
 Wire Wire Line
@@ -288,18 +253,14 @@ Wire Wire Line
 Wire Wire Line
 	9150 4000 9150 4200
 Wire Wire Line
-	7700 4600 7700 4750
-Wire Wire Line
-	7700 4750 7700 4900
+	7700 4600 7700 4900
 Wire Wire Line
 	7750 4750 7700 4750
 Connection ~ 7700 4750
 Wire Wire Line
 	8300 5400 8300 5500
 Wire Wire Line
-	8350 4750 8300 4750
-Wire Wire Line
-	8300 4750 8250 4750
+	8350 4750 8250 4750
 Connection ~ 8300 4750
 Wire Wire Line
 	9200 4750 9150 4750
@@ -362,34 +323,24 @@ Wire Wire Line
 	1600 2800 1600 2600
 Connection ~ 1600 2600
 Wire Wire Line
-	3950 2600 4000 2600
-Wire Wire Line
-	4000 2600 4100 2600
+	3950 2600 4100 2600
 Wire Wire Line
 	1000 3850 1000 4050
 Wire Wire Line
-	1000 4050 1600 4050
-Wire Wire Line
-	1600 4050 1750 4050
-Wire Wire Line
-	1750 4050 1850 4050
+	1000 4050 1850 4050
 Wire Wire Line
 	1600 4050 1600 4250
 Connection ~ 1600 4050
 Wire Wire Line
 	1600 4650 1600 4900
 Wire Wire Line
-	4100 4050 4000 4050
-Wire Wire Line
-	4000 4050 3950 4050
+	3950 4050 4100 4050
 Connection ~ 4100 4050
 Wire Wire Line
 	4000 4250 4000 4050
 Connection ~ 4000 4050
 Wire Wire Line
-	4100 4250 4100 4050
-Wire Wire Line
-	4100 4050 4100 3800
+	4100 4250 4100 3800
 Text Label 3250 4050 0    50   ~ 0
 LX33
 Text Label 3250 2600 0    50   ~ 0

pcb/kicad/RevE2/sd2snes.cmp

@@ -1,4 +1,4 @@
-Cmp-Mod V01 Created by CvPCB (2011-07-02 BZR 2664)-stable date = Mon 26 Dec 2011 09:56:51 PM CET
+Cmp-Mod V01 Created by CvPcb (2012-jan-04)-stable date = Sun 26 Feb 2012 01:11:53 AM CET
 
 BeginCmp
 TimeStamp = /4B6EC9C3/4BAF2EAF;
@@ -865,119 +865,119 @@ BeginCmp
 TimeStamp = /4B6E16F2/4D9630F0;
 Reference = RA101;
 ValeurCmp = 100;
-IdModule  = R_PACK_0804;
+IdModule  = R_PACK_0804_LONGPADS;
 EndCmp
 
 BeginCmp
 TimeStamp = /4B6E16F2/4D9630F4;
 Reference = RA102;
 ValeurCmp = 100;
-IdModule  = R_PACK_0804;
+IdModule  = R_PACK_0804_LONGPADS;
 EndCmp
 
 BeginCmp
 TimeStamp = /4B6E16F2/4D95CDCD;
 Reference = RA103;
 ValeurCmp = FB;
-IdModule  = R_PACK_0804;
+IdModule  = R_PACK_0804_LONGPADS;
 EndCmp
 
 BeginCmp
 TimeStamp = /4B6E16F2/4D95CDD4;
 Reference = RA104;
 ValeurCmp = FB;
-IdModule  = R_PACK_0804;
+IdModule  = R_PACK_0804_LONGPADS;
 EndCmp
 
 BeginCmp
 TimeStamp = /4B6E16F2/4D96310E;
 Reference = RA105;
 ValeurCmp = 100;
-IdModule  = R_PACK_0804;
+IdModule  = R_PACK_0804_LONGPADS;
 EndCmp
 
 BeginCmp
 TimeStamp = /4B6E16F2/4D963115;
 Reference = RA106;
 ValeurCmp = 100;
-IdModule  = R_PACK_0804;
+IdModule  = R_PACK_0804_LONGPADS;
 EndCmp
 
 BeginCmp
 TimeStamp = /4B6E16F2/4D963117;
 Reference = RA107;
 ValeurCmp = 100;
-IdModule  = R_PACK_0804;
+IdModule  = R_PACK_0804_LONGPADS;
 EndCmp
 
 BeginCmp
 TimeStamp = /4B6E16F2/4D963119;
 Reference = RA108;
 ValeurCmp = 100;
-IdModule  = R_PACK_0804;
+IdModule  = R_PACK_0804_LONGPADS;
 EndCmp
 
 BeginCmp
 TimeStamp = /4B6E16F2/4D963103;
 Reference = RA109;
 ValeurCmp = 100;
-IdModule  = R_PACK_0804;
+IdModule  = R_PACK_0804_LONGPADS;
 EndCmp
 
 BeginCmp
 TimeStamp = /4B6E16F2/4D963107;
 Reference = RA110;
 ValeurCmp = 100;
-IdModule  = R_PACK_0804;
+IdModule  = R_PACK_0804_LONGPADS;
 EndCmp
 
 BeginCmp
 TimeStamp = /4B6E16F2/4D96310A;
 Reference = RA111;
 ValeurCmp = 100;
-IdModule  = R_PACK_0804;
+IdModule  = R_PACK_0804_LONGPADS;
 EndCmp
 
 BeginCmp
 TimeStamp = /4B6E16F2/4D96310C;
 Reference = RA112;
 ValeurCmp = 100;
-IdModule  = R_PACK_0804;
+IdModule  = R_PACK_0804_LONGPADS;
 EndCmp
 
 BeginCmp
 TimeStamp = /4B6E16F2/4D97B45C;
 Reference = RA113;
 ValeurCmp = 100;
-IdModule  = R_PACK_0804;
+IdModule  = R_PACK_0804_LONGPADS;
 EndCmp
 
 BeginCmp
 TimeStamp = /4B6E16F2/4D97B45F;
 Reference = RA114;
 ValeurCmp = 100;
-IdModule  = R_PACK_0804;
+IdModule  = R_PACK_0804_LONGPADS;
 EndCmp
 
 BeginCmp
 TimeStamp = /4B6E16F2/4B6E1740;
 Reference = U101;
 ValeurCmp = 74ALVC164245DGG;
-IdModule  = TSSOP48;
+IdModule  = TSSOP48_LONGPADS;
 EndCmp
 
 BeginCmp
 TimeStamp = /4B6E16F2/4B6E1744;
 Reference = U102;
 ValeurCmp = 74ALVC164245DGG;
-IdModule  = TSSOP48;
+IdModule  = TSSOP48_LONGPADS;
 EndCmp
 
 BeginCmp
 TimeStamp = /4B6E16F2/4B6E1748;
 Reference = U103;
 ValeurCmp = 74ALVC164245DGG;
-IdModule  = TSSOP48;
+IdModule  = TSSOP48_LONGPADS;
 EndCmp
 
 BeginCmp
@@ -1026,7 +1026,7 @@ BeginCmp
 TimeStamp = /4B6EC9C3/4BAA9331;
 Reference = U341;
 ValeurCmp = CS4344;
-IdModule  = TSSOP10;
+IdModule  = TSSOP10_LONGPADS;
 EndCmp
 
 BeginCmp

pcb/kicad/RevE2/sd2snes.pro

@@ -1,4 +1,4 @@
-update=Tue 27 Dec 2011 01:22:01 AM CET
+update=Sat 25 Feb 2012 11:51:50 PM CET
 version=1
 last_client=pcbnew
 [general]
@@ -83,9 +83,9 @@ LibName40=libs/usb_minib
 LibName41=libs/mic23250
 [pcbnew]
 version=1
-PadDrlX=400
-PadDimH=660
-PadDimV=660
+PadDrlX=0
+PadDimH=197
+PadDimV=276
 BoardThickness=630
 TxtPcbV=800
 TxtPcbH=600
@@ -111,6 +111,7 @@ LibName8=valves
 LibName9=led
 LibName10=dip_sockets
 LibName11=libs/mypackages
-LibName12=libs/hai
-LibName13=libs/snescart
-LibName14=libs/sdcard
+LibName12=libs/snescart
+LibName13=libs/sdcard
+LibName14=libs/snail
+LibName15=libs/snail2

pcb/kicad/RevE2/sd2snes.sch

@@ -1,4 +1,4 @@
-EESchema Schematic File Version 2  date Mon 26 Dec 2011 09:56:13 PM CET
+EESchema Schematic File Version 2  date Mon 02 Jan 2012 11:27:18 PM CET
 LIBS:power
 LIBS:device
 LIBS:transistors
@@ -40,13 +40,14 @@ LIBS:cs4344
 LIBS:double_sch_kcom
 LIBS:usb_minib
 LIBS:mic23250
+LIBS:sd2snes-cache
 EELAYER 25  0
 EELAYER END
 $Descr A4 11700 8267
 encoding utf-8
 Sheet 1 6
 Title "sd2snes Mark II"
-Date "26 dec 2011"
+Date "2 jan 2012"
 Rev "E2"
 Comp "Maximilian Rehkopf"
 Comment1 ""

pcb/kicad/RevE2/snesslot.sch

@@ -1,4 +1,4 @@
-EESchema Schematic File Version 2  date Mon 26 Dec 2011 09:56:13 PM CET
+EESchema Schematic File Version 2  date Mon 02 Jan 2012 11:27:18 PM CET
 LIBS:power
 LIBS:device
 LIBS:transistors
@@ -40,13 +40,14 @@ LIBS:cs4344
 LIBS:double_sch_kcom
 LIBS:usb_minib
 LIBS:mic23250
+LIBS:sd2snes-cache
 EELAYER 25  0
 EELAYER END
 $Descr A3 16535 11700
 encoding utf-8
 Sheet 2 6
 Title "sd2snes Mark II"
-Date "26 dec 2011"
+Date "2 jan 2012"
 Rev "E2"
 Comp "Maximilian Rehkopf"
 Comment1 ""

pcb/kicad/libs/mypackages.mod

@@ -1,10 +1,11 @@
-PCBNEW-LibModule-V1  Tue 27 Dec 2011 12:29:40 AM CET
+PCBNEW-LibModule-V1  Sun 26 Feb 2012 12:35:43 AM CET
 # encoding utf-8
 $INDEX
 BT_KEYSTONE_1059_20MM
 CP_TANTAL_SMD_D
 DIP-36
 HC49US
+HRS-DM1AA
 LED-3MM-FIXED
 LQFP80-.5
 L_4.2X4.2
@@ -30,6 +31,7 @@ TSSOP10_LONGPADS
 TSSOP48
 TSSOP48_LONGPADS
 USB-MINIB-THT
+USB_MINIB_SMT
 VFBGA36
 VFBGA48
 VFBGA54
@@ -5707,75 +5709,6 @@ Ne 0 ""
 Po -510 -384
 $EndPAD
 $EndMODULE  R_PACK_1206
-$MODULE R_PACK_0804_LONGPADS
-Po 0 0 0 15 4EF2E2A7 00000000 ~~
-Li R_PACK_0804_LONGPADS
-Sc 00000000
-AR
-Op 0 0 0
-T0 0 0 320 320 0 70 N V 21 N "R_PACK_0804"
-T1 0 0 320 320 0 70 N V 21 N "VAL**"
-DS 551 591 551 -591 79 21
-DS -551 -591 -551 591 79 21
-DS -551 -591 551 -591 79 21
-DS 551 591 -551 591 79 21
-$PAD
-Sh "7" R 118 354 0 0 0
-Dr 0 0 0
-At SMD N 00888000
-Ne 0 ""
-Po -98 -276
-$EndPAD
-$PAD
-Sh "6" R 118 354 0 0 0
-Dr 0 0 0
-At SMD N 00888000
-Ne 0 ""
-Po 98 -276
-$EndPAD
-$PAD
-Sh "2" R 118 354 0 0 0
-Dr 0 0 0
-At SMD N 00888000
-Ne 0 ""
-Po -98 276
-$EndPAD
-$PAD
-Sh "3" R 118 354 0 0 0
-Dr 0 0 0
-At SMD N 00888000
-Ne 0 ""
-Po 98 276
-$EndPAD
-$PAD
-Sh "8" R 197 354 0 0 0
-Dr 0 0 0
-At SMD N 00888000
-Ne 0 ""
-Po -335 -276
-$EndPAD
-$PAD
-Sh "5" R 197 354 0 0 0
-Dr 0 0 0
-At SMD N 00888000
-Ne 0 ""
-Po 335 -276
-$EndPAD
-$PAD
-Sh "4" R 197 354 0 0 0
-Dr 0 0 0
-At SMD N 00888000
-Ne 0 ""
-Po 335 276
-$EndPAD
-$PAD
-Sh "1" R 197 354 0 0 0
-Dr 0 0 0
-At SMD N 00888000
-Ne 0 ""
-Po -335 276
-$EndPAD
-$EndMODULE  R_PACK_0804_LONGPADS
 $MODULE TSSOP10_LONGPADS
 Po 0 0 0 15 4EF2E58B 00000000 ~~
 Li TSSOP10_LONGPADS
@@ -5860,19 +5793,390 @@ Ne 0 ""
 Po -393 -965
 $EndPAD
 $EndMODULE  TSSOP10_LONGPADS
-$MODULE TSSOP48_LONGPADS
-Po 0 0 0 15 4B6E17E6 00000000 ~~
-Li TSSOP48_LONGPADS
+$MODULE L_4.2X4.2
+Po 0 0 0 15 4EF777D2 00000000 ~~
+Li L_4.2X4.2
 Sc 00000000
 AR
 Op 0 0 0
-T0 0 -551 600 600 0 120 N V 21 N "Test"
-T1 0 630 600 600 0 120 N V 21 N "VAL**"
-DC -2205 945 -2087 945 40 21
-DS -2460 -1200 2460 -1200 47 21
-DS 2460 -1200 2460 1200 47 21
-DS -2460 1200 2460 1200 47 21
-DS -2460 -1200 -2460 1200 47 21
+T0 0 0 600 600 0 120 N V 21 N "L_4.2X4.2"
+T1 0 0 600 600 0 120 N V 21 N "VAL**"
+DS -1024 -984 1024 -984 79 21
+DS 1024 -984 1024 984 79 21
+DS 1024 984 -1024 984 79 21
+DS -1024 984 -1024 -984 79 21
+$PAD
+Sh "1" R 591 1654 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -571 0
+$EndPAD
+$PAD
+Sh "2" R 591 1654 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 571 0
+$EndPAD
+$EndMODULE  L_4.2X4.2
+$MODULE LED-3MM-FIXED
+Po 0 0 0 15 4EF9035D 00000000 ~~
+Li LED-3MM-FIXED
+Cd LED 3mm - Lead pitch 100mil (2,54mm)
+Kw LED led 3mm 3MM 100mil 2,54mm
+Sc 00000000
+AR /4B6ED75B/4C0DA78D
+Op 0 0 0
+At VIRTUAL
+T0 -300 -2125 320 320 0 70 N V 21 N "D403"
+T1 25 3575 320 320 2700 70 N V 21 N "LED_2mA_1.7V,_red"
+DS 669 669 669 394 80 21
+DS 669 -669 669 -394 80 21
+DA 0 0 669 669 2700 80 21
+$PAD
+Sh "1" C 660 660 0 0 0
+Dr 400 0 0
+At STD N 00E0FFFF
+Ne 1 "+3.3V"
+Po -500 0
+$EndPAD
+$PAD
+Sh "2" C 660 660 0 0 0
+Dr 400 0 0
+At STD N 00E0FFFF
+Ne 2 "N-000262"
+Po 500 0
+$EndPAD
+$SHAPE3D
+Na "libs/led3_vertical_red.wrl"
+Sc 1.000000 1.000000 1.000000
+Of 0.000000 0.000000 0.000000
+Ro 0.000000 0.000000 0.000000
+$EndSHAPE3D
+$EndMODULE  LED-3MM-FIXED
+$MODULE USB_MINIB_SMT
+Po 0 0 0 15 4F34EE0A 00000000 ~~
+Li USB_MINIB_SMT
+Sc 00000000
+AR /4B6ED75B/4BF00175
+Op 0 0 0
+T0 -2553 -147 320 320 0 70 N V 21 N "J421"
+T1 0 0 320 320 0 80 N I 21 N "USB_Mini-B_SMT"
+DS -1516 2047 1516 2047 79 21
+DS 1516 2047 1516 -1575 79 21
+DS 1516 -1575 -1516 -1575 79 21
+DS -1516 -1575 -1516 2047 79 21
+$PAD
+Sh "6" R 787 1299 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 1 "GND"
+Po -1752 -1161
+$EndPAD
+$PAD
+Sh "7" R 787 1299 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 1 "GND"
+Po 1752 -1161
+$EndPAD
+$PAD
+Sh "6" R 787 984 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 1 "GND"
+Po -1752 1161
+$EndPAD
+$PAD
+Sh "7" R 787 984 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 1 "GND"
+Po 1752 1161
+$EndPAD
+$PAD
+Sh "" C 354 354 0 0 0
+Dr 354 0 0
+At HOLE N 00E0FFFF
+Ne 0 ""
+Po -866 0
+$EndPAD
+$PAD
+Sh "" C 354 354 0 0 0
+Dr 354 0 0
+At HOLE N 00E0FFFF
+Ne 0 ""
+Po 866 0
+$EndPAD
+$PAD
+Sh "3" R 197 1496 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 3 "N-000315"
+Po 0 -1418
+$EndPAD
+$PAD
+Sh "4" R 197 1496 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 315 -1418
+$EndPAD
+$PAD
+Sh "5" R 197 1496 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 1 "GND"
+Po 630 -1418
+$EndPAD
+$PAD
+Sh "1" R 197 1496 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 4 "N-000328"
+Po -630 -1418
+$EndPAD
+$PAD
+Sh "2" R 197 1496 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 2 "N-000310"
+Po -315 -1418
+$EndPAD
+$EndMODULE  USB_MINIB_SMT
+$MODULE HRS-DM1AA
+Po 0 0 0 15 4F34F118 00000000 ~~
+Li HRS-DM1AA
+Sc 00000000
+AR /4B6ED75B/4BAA6A9C
+Op 0 0 0
+T0 -5000 -6425 320 320 0 70 N V 21 N "J411"
+T1 0 0 320 320 0 70 N V 21 N "Hirose_DM1AA"
+DS 4134 -5984 5512 -5984 120 21
+DS 5512 6024 -5512 6024 120 21
+DS -5512 -5984 -4685 -5984 120 21
+DS -5512 4685 -5512 6024 120 21
+DS 5511 6025 5511 4686 120 21
+DS 5511 -2637 5511 3584 120 21
+DS 5511 -5983 5511 -3779 120 21
+DS 4133 -5511 3779 -5511 120 21
+DS -4686 -5511 -4529 -5511 120 21
+DS -5512 2521 -5512 2796 120 21
+DS -5512 -983 -5512 1773 120 21
+DS -5512 -2637 -5512 -1731 120 21
+DS -5512 -5983 -5512 -3779 120 21
+DS -4686 -5983 -4686 -5511 120 21
+DS 4133 -5511 4133 -5983 120 21
+$PAD
+Sh "" C 512 512 0 0 0
+Dr 512 0 0
+At HOLE N 00E0FFFF
+Ne 0 ""
+Po -4686 -4999
+$EndPAD
+$PAD
+Sh "" C 512 512 0 0 0
+Dr 512 0 0
+At HOLE N 00E0FFFF
+Ne 0 ""
+Po 4133 -4999
+$EndPAD
+$PAD
+Sh "1" R 433 787 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 10 "SD_DAT3"
+Po 2391 -5865
+$EndPAD
+$PAD
+Sh "2" R 433 787 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 6 "SD_CMD"
+Po 1407 -5865
+$EndPAD
+$PAD
+Sh "3" R 433 787 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 2 "GND"
+Po 422 -5865
+$EndPAD
+$PAD
+Sh "4" R 433 787 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 1 "+3.3V"
+Po -562 -5865
+$EndPAD
+$PAD
+Sh "5" R 433 787 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 5 "SD_CLK"
+Po -1546 -5865
+$EndPAD
+$PAD
+Sh "6" R 433 787 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 2 "GND"
+Po -2530 -5865
+$EndPAD
+$PAD
+Sh "7" R 433 787 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 7 "SD_DAT0"
+Po -3485 -5865
+$EndPAD
+$PAD
+Sh "8" R 433 787 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 8 "SD_DAT1"
+Po -4155 -5865
+$EndPAD
+$PAD
+Sh "9" R 433 787 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 9 "SD_DAT2"
+Po 3375 -5865
+$EndPAD
+$PAD
+Sh "GND1" R 787 787 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 2 "GND"
+Po 5708 -3208
+$EndPAD
+$PAD
+Sh "GND1" R 787 787 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 2 "GND"
+Po 5708 4135
+$EndPAD
+$PAD
+Sh "GND1" R 787 787 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 2 "GND"
+Po -5710 -3208
+$EndPAD
+$PAD
+Sh "GND1" R 787 787 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 2 "GND"
+Po -5710 4135
+$EndPAD
+$PAD
+Sh "DT" R 787 394 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 4 "N-000318"
+Po -5552 -1377
+$EndPAD
+$PAD
+Sh "WP" R 787 394 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 3 "N-000295"
+Po -5552 2147
+$EndPAD
+$PAD
+Sh "GND2" R 787 394 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 2 "GND"
+Po -5552 3170
+$EndPAD
+$EndMODULE  HRS-DM1AA
+$MODULE R_PACK_0804_LONGPADS
+Po 0 0 0 15 4F496244 00000000 ~~
+Li R_PACK_0804_LONGPADS
+Sc 00000000
+AR /4B6E16F2/4D96310E
+Op 0 0 0
+T0 325 750 320 320 0 70 N V 21 N "RA105"
+T1 0 0 320 320 0 70 N V 21 N "100"
+DS -551 -472 -551 472 79 21
+DS 551 -472 551 472 79 21
+DS -551 -472 551 -472 79 21
+DS 551 472 -551 472 79 21
+$PAD
+Sh "7" R 118 276 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 5 "N-000012"
+Po -98 -236
+$EndPAD
+$PAD
+Sh "6" R 118 276 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 7 "N-000143"
+Po 98 -236
+$EndPAD
+$PAD
+Sh "2" R 118 276 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 2 "/SNES_Slot/SNES_EXT_/RD"
+Po -98 236
+$EndPAD
+$PAD
+Sh "3" R 118 276 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 3 "/SNES_Slot/SNES_EXT_/ROMSEL"
+Po 98 236
+$EndPAD
+$PAD
+Sh "8" R 197 276 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 8 "N-000147"
+Po -335 -236
+$EndPAD
+$PAD
+Sh "5" R 197 276 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 6 "N-000038"
+Po 335 -236
+$EndPAD
+$PAD
+Sh "4" R 197 276 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 4 "/SNES_Slot/SNES_EXT_A23"
+Po 335 236
+$EndPAD
+$PAD
+Sh "1" R 197 276 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 1 "/SNES_Slot/SNES_EXT_/IRQ"
+Po -335 236
+$EndPAD
+$EndMODULE  R_PACK_0804_LONGPADS
+$MODULE TSSOP48_LONGPADS
+Po 0 0 0 15 4F497040 00000000 ~~
+Li TSSOP48_LONGPADS
+Sc 00000000
+AR 
+Op 0 0 0
+T0 0 -551 320 320 0 70 N V 21 N "Test"
+T1 0 630 320 320 0 70 N V 21 N "VAL**"
+DS -2461 1161 -2461 -1161 79 21
+DS 2461 -1161 2461 1161 79 21
+DC -2205 906 -2087 906 79 21
+DS -2460 -1160 2460 -1160 79 21
+DS -2460 1160 2460 1160 79 21
 $PAD
 Sh "1" R 118 630 0 0 1800
 Dr 0 0 0
@@ -6210,66 +6514,4 @@ Ne 0 ""
 Po -2263 -1614
 $EndPAD
 $EndMODULE  TSSOP48_LONGPADS
-$MODULE L_4.2X4.2
-Po 0 0 0 15 4EF777D2 00000000 ~~
-Li L_4.2X4.2
-Sc 00000000
-AR
-Op 0 0 0
-T0 0 0 600 600 0 120 N V 21 N "L_4.2X4.2"
-T1 0 0 600 600 0 120 N V 21 N "VAL**"
-DS -1024 -984 1024 -984 79 21
-DS 1024 -984 1024 984 79 21
-DS 1024 984 -1024 984 79 21
-DS -1024 984 -1024 -984 79 21
-$PAD
-Sh "1" R 591 1654 0 0 0
-Dr 0 0 0
-At SMD N 00888000
-Ne 0 ""
-Po -571 0
-$EndPAD
-$PAD
-Sh "2" R 591 1654 0 0 0
-Dr 0 0 0
-At SMD N 00888000
-Ne 0 ""
-Po 571 0
-$EndPAD
-$EndMODULE  L_4.2X4.2
-$MODULE LED-3MM-FIXED
-Po 0 0 0 15 4EF9035D 00000000 ~~
-Li LED-3MM-FIXED
-Cd LED 3mm - Lead pitch 100mil (2,54mm)
-Kw LED led 3mm 3MM 100mil 2,54mm
-Sc 00000000
-AR /4B6ED75B/4C0DA78D
-Op 0 0 0
-At VIRTUAL 
-T0 -300 -2125 320 320 0 70 N V 21 N "D403"
-T1 25 3575 320 320 2700 70 N V 21 N "LED_2mA_1.7V,_red"
-DS 669 669 669 394 80 21
-DS 669 -669 669 -394 80 21
-DA 0 0 669 669 2700 80 21
-$PAD
-Sh "1" C 660 660 0 0 0
-Dr 400 0 0
-At STD N 00E0FFFF
-Ne 1 "+3.3V"
-Po -500 0
-$EndPAD
-$PAD
-Sh "2" C 660 660 0 0 0
-Dr 400 0 0
-At STD N 00E0FFFF
-Ne 2 "N-000262"
-Po 500 0
-$EndPAD
-$SHAPE3D
-Na "libs/led3_vertical_red.wrl"
-Sc 1.000000 1.000000 1.000000
-Of 0.000000 0.000000 0.000000
-Ro 0.000000 0.000000 0.000000
-$EndSHAPE3D
-$EndMODULE  LED-3MM-FIXED
 $EndLIBRARY

pcb/kicad/libs/sdcard.bak

@@ -1,7 +1,8 @@
-PCBNEW-LibModule-V1  Mon 26 Jul 2010 09:33:33 PM CEST
+PCBNEW-LibModule-V1  Tue 27 Dec 2011 12:52:27 PM CET
+# encoding utf-8
 $INDEX
-SD-RSMT-2-MQ-WF
 HRS-DM1AA
+SD-RSMT-2-MQ-WF
 $EndINDEX
 $MODULE SD-RSMT-2-MQ-WF
 Po 0 0 0 15 4C4D74E3 00000000 ~~
@@ -124,13 +125,13 @@ Po 3740 709
 $EndPAD
 $EndMODULE  SD-RSMT-2-MQ-WF
 $MODULE HRS-DM1AA
-Po 0 0 0 15 4C4DE307 00000000 ~~
+Po 0 0 0 15 4EF9108C 00000000 ~~
 Li HRS-DM1AA
 Sc 00000000
-AR 
+AR HRS-DM1AA
 Op 0 0 0
-T0 0 0 300 300 0 60 N V 21 N"HRS-DM1AA"
-T1 0 0 300 300 0 60 N V 21 N"VAL**"
+T0 0 0 300 300 0 60 N V 21 N "HRS-DM1AA"
+T1 0 0 300 300 0 60 N V 21 N "VAL**"
 DS 4134 -5984 5512 -5984 120 21
 DS 5512 6024 -5512 6024 120 21
 DS -5512 -5984 -4685 -5984 120 21
@@ -149,14 +150,14 @@ DS 4133 -5511 4133 -5983 120 21
 $PAD
 Sh "~" C 512 512 0 0 0
 Dr 512 0 0
-At STD N 00E0FFFF
+At STD N 0000FFFF
 Ne 0 ""
 Po -4686 -4999
 $EndPAD
 $PAD
 Sh "~" C 512 512 0 0 0
 Dr 512 0 0
-At STD N 00E0FFFF
+At STD N 0000FFFF
 Ne 0 ""
 Po 4133 -4999
 $EndPAD

pcb/kicad/libs/sdcard.mod

@@ -1,4 +1,4 @@
-PCBNEW-LibModule-V1  Tue 27 Dec 2011 01:25:51 AM CET
+PCBNEW-LibModule-V1  Sun 26 Feb 2012 12:17:38 AM CET
 # encoding utf-8
 $INDEX
 HRS-DM1AA
@@ -125,7 +125,7 @@ Po 3740 709
 $EndPAD
 $EndMODULE  SD-RSMT-2-MQ-WF
 $MODULE HRS-DM1AA
-Po 0 0 0 15 4EF9108C 00000000 ~~
+Po 0 0 0 15 4F496C0E 00000000 ~~
 Li HRS-DM1AA
 Sc 00000000
 AR HRS-DM1AA
@@ -148,16 +148,16 @@ DS -5512 -5983 -5512 -3779 120 21
 DS -4686 -5983 -4686 -5511 120 21
 DS 4133 -5511 4133 -5983 120 21
 $PAD
-Sh "~" C 510 510 0 0 0
+Sh "" C 512 512 0 0 0
 Dr 512 0 0
-At STD N 0000FFFF
+At HOLE N 00E0FFFF
 Ne 0 ""
 Po -4686 -4999
 $EndPAD
 $PAD
-Sh "~" C 510 510 0 0 0
+Sh "" C 512 512 0 0 0
 Dr 512 0 0
-At STD N 0000FFFF
+At HOLE N 00E0FFFF
 Ne 0 ""
 Po 4133 -4999
 $EndPAD

pcb/kicad/libs/snescart.bak

@@ -1,4 +1,4 @@
-PCBNEW-LibModule-V1  Mon 04 Jul 2011 12:35:33 AM CEST
+PCBNEW-LibModule-V1  Thu 09 Feb 2012 09:51:59 PM CET
 # encoding utf-8
 $INDEX
 SNESCART_EXT
@@ -537,7 +537,7 @@ Po 14331 -3780
 $EndPAD
 $EndMODULE  SNESCART_EXT
 $MODULE SNESCART_EXT2
-Po 0 0 0 15 4E0F6C87 00000000 ~~
+Po 0 0 0 15 4F3431E9 00000000 ~~
 Li SNESCART_EXT2
 Sc 00000000
 AR /4B6E16F2/4B6E1766
@@ -546,6 +546,18 @@ Op 0 0 0
 .SolderPaste -4
 T0 -4134 2953 600 600 0 120 N V 21 N "J101"
 T1 0 2953 600 600 0 120 N V 21 N "SNESCART_EXT"
+DS -20039 -5000 -20039 -8898 39 28
+DS -18465 -4016 -18465 -5000 39 28
+DS -19449 -2402 -19449 -4016 39 28
+DS -17717 -2402 -17717 1693 39 28
+DS 17717 -2402 17717 1693 39 28
+DS 19921 -4094 19921 -2402 39 28
+DS 19291 -29252 19291 -27756 39 28
+DS -19488 -29252 -19488 -27756 39 28
+DS -8524 -30709 -8524 -29252 39 28
+DS 8622 -29252 8622 -30709 39 28
+DS -20039 -24409 -20039 -12244 39 28
+DS -19488 -27087 -19488 -24409 39 28
 DC 1142 -11378 1929 -11378 79 20
 DC 1142 -11378 1929 -11339 79 21
 DS 19921 -24409 19921 -8976 39 28
@@ -556,46 +568,33 @@ DS 19291 -8189 19291 -6890 39 28
 DS 18307 -8189 19291 -8189 39 28
 DS 18307 -8976 18307 -8189 39 28
 DS 19921 -8976 18307 -8976 39 28
-DS -20039 -4803 -20039 -8898 39 28
-DS -20039 -24528 -20039 -12244 39 28
 DS -18465 -12244 -20039 -12244 39 28
 DS -18465 -11457 -18465 -12244 39 28
 DS -19449 -11457 -18465 -11457 39 28
 DS -19449 -8898 -19449 -11457 39 28
 DS -20039 -8898 -19449 -8898 39 28
-DS -19488 -27087 -19488 -24528 39 28
 DA -17441 1693 -17441 1969 900 39 28
 DA -13071 1693 -12795 1693 900 39 28
 DA -11535 1693 -11535 1969 900 39 28
 DA 11535 1693 11811 1693 900 39 28
 DA 13071 1693 13071 1969 900 39 28
 DA 17441 1693 17717 1693 900 39 28
-DS 8622 -29331 19291 -29331 40 28
+DS 8622 -29252 19291 -29252 40 28
 DS -8524 -30709 8622 -30709 40 28
-DS -19488 -29331 -8524 -29331 40 28
+DS -19488 -29252 -8524 -29252 40 28
 DC 2796 -17047 3583 -17047 75 20
 DC 2795 -17047 3582 -17047 75 21
-DS 8622 -29331 8622 -30709 40 28
-DS -8524 -30709 -8524 -29331 40 28
-DS -19488 -29331 -19488 -27756 40 28
 DS -19488 -27756 -18504 -27756 40 28
 DS -18504 -27756 -18504 -27087 40 28
 DS -18504 -27087 -19488 -27087 40 28
-DS -19488 -24528 -20039 -24528 40 28
-DS -20039 -4803 -18465 -4803 40 28
-DS -18465 -4803 -18465 -4016 40 28
+DS -19488 -24409 -20039 -24409 40 28
+DS -20039 -5000 -18465 -5000 40 28
 DS -18465 -4016 -19449 -4016 40 28
-DS -19449 -4016 -19449 -2205 40 28
-DS -19449 -2205 -17717 -2205 40 28
-DS -17717 -2205 -17717 -2165 40 28
+DS -19449 -2402 -17717 -2402 40 28
 DS 19291 -27087 18307 -27087 40 28
 DS 18307 -27087 18307 -27756 40 28
 DS 18307 -27756 19291 -27756 40 28
-DS 19291 -27756 19291 -29331 40 28
-DS 17717 1693 17717 -2165 40 28
-DS 17717 -2165 17717 -2205 40 28
-DS 17717 -2205 19921 -2205 40 28
-DS 19921 -2205 19921 -4094 40 28
+DS 17717 -2402 19921 -2402 40 28
 DS 19921 -4094 19291 -4094 40 28
 DS 19291 -4094 19291 -6102 40 28
 DS 19291 -6102 18307 -6102 40 28
@@ -604,7 +603,6 @@ DS 13071 1969 17441 1969 40 28
 DS 11811 1693 11811 -2480 40 28
 DS 11811 -2480 12795 -2480 40 28
 DS 12795 -2480 12795 1693 40 28
-DS -17717 1693 -17717 -2165 40 28
 DS -13071 1969 -17441 1969 40 28
 DS -11811 1693 -11811 -2480 40 28
 DS -11811 -2480 -12795 -2480 40 28
@@ -864,6 +862,7 @@ Dr 0 0 0
 At CONN N 00000001
 Ne 0 ""
 Po -16732 197
+Le -65794
 $EndPAD
 $PAD
 Sh "33" R 591 2756 0 0 0
@@ -871,6 +870,7 @@ Dr 0 0 0
 At CONN N 00000001
 Ne 49 "/SNES_Slot/SNES_EXT_REFRESH"
 Po -15748 197
+Le -197380
 $EndPAD
 $PAD
 Sh "34" R 591 2756 0 0 0

pcb/kicad/libs/snescart.mod

@@ -1,8 +1,9 @@
-PCBNEW-LibModule-V1  Mon 04 Jul 2011 12:37:18 AM CEST
+PCBNEW-LibModule-V1  Fri 10 Feb 2012 10:51:00 AM CET
 # encoding utf-8
 $INDEX
 SNESCART_EXT
 SNESCART_EXT2
+SNESCART_EXT2_SMTUSB
 $EndINDEX
 $MODULE SNESCART_EXT
 Po 0 0 0 15 4D200467 00000000 ~~
@@ -537,7 +538,7 @@ Po 14331 -3780
 $EndPAD
 $EndMODULE  SNESCART_EXT
 $MODULE SNESCART_EXT2
-Po 0 0 0 15 4E10EF0E 00000000 ~~
+Po 0 0 0 15 4F3431E9 00000000 ~~
 Li SNESCART_EXT2
 Sc 00000000
 AR /4B6E16F2/4B6E1766
@@ -546,6 +547,16 @@ Op 0 0 0
 .SolderPaste -4
 T0 -4134 2953 600 600 0 120 N V 21 N "J101"
 T1 0 2953 600 600 0 120 N V 21 N "SNESCART_EXT"
+DS -20039 -5000 -20039 -8898 39 28
+DS -18465 -4016 -18465 -5000 39 28
+DS -19449 -2402 -19449 -4016 39 28
+DS -17717 -2402 -17717 1693 39 28
+DS 17717 -2402 17717 1693 39 28
+DS 19921 -4094 19921 -2402 39 28
+DS 19291 -29252 19291 -27756 39 28
+DS -19488 -29252 -19488 -27756 39 28
+DS -8524 -30709 -8524 -29252 39 28
+DS 8622 -29252 8622 -30709 39 28
 DS -20039 -24409 -20039 -12244 39 28
 DS -19488 -27087 -19488 -24409 39 28
 DC 1142 -11378 1929 -11378 79 20
@@ -558,7 +569,6 @@ DS 19291 -8189 19291 -6890 39 28
 DS 18307 -8189 19291 -8189 39 28
 DS 18307 -8976 18307 -8189 39 28
 DS 19921 -8976 18307 -8976 39 28
-DS -20039 -4803 -20039 -8898 39 28
 DS -18465 -12244 -20039 -12244 39 28
 DS -18465 -11457 -18465 -12244 39 28
 DS -19449 -11457 -18465 -11457 39 28
@@ -570,32 +580,22 @@ DA -11535 1693 -11535 1969 900 39 28
 DA 11535 1693 11811 1693 900 39 28
 DA 13071 1693 13071 1969 900 39 28
 DA 17441 1693 17717 1693 900 39 28
-DS 8622 -29331 19291 -29331 40 28
+DS 8622 -29252 19291 -29252 40 28
 DS -8524 -30709 8622 -30709 40 28
-DS -19488 -29331 -8524 -29331 40 28
+DS -19488 -29252 -8524 -29252 40 28
 DC 2796 -17047 3583 -17047 75 20
 DC 2795 -17047 3582 -17047 75 21
-DS 8622 -29331 8622 -30709 40 28
-DS -8524 -30709 -8524 -29331 40 28
-DS -19488 -29331 -19488 -27756 40 28
 DS -19488 -27756 -18504 -27756 40 28
 DS -18504 -27756 -18504 -27087 40 28
 DS -18504 -27087 -19488 -27087 40 28
 DS -19488 -24409 -20039 -24409 40 28
-DS -20039 -4803 -18465 -4803 40 28
-DS -18465 -4803 -18465 -4016 40 28
+DS -20039 -5000 -18465 -5000 40 28
 DS -18465 -4016 -19449 -4016 40 28
-DS -19449 -4016 -19449 -2205 40 28
-DS -19449 -2205 -17717 -2205 40 28
-DS -17717 -2205 -17717 -2165 40 28
+DS -19449 -2402 -17717 -2402 40 28
 DS 19291 -27087 18307 -27087 40 28
 DS 18307 -27087 18307 -27756 40 28
 DS 18307 -27756 19291 -27756 40 28
-DS 19291 -27756 19291 -29331 40 28
-DS 17717 1693 17717 -2165 40 28
-DS 17717 -2165 17717 -2205 40 28
-DS 17717 -2205 19921 -2205 40 28
-DS 19921 -2205 19921 -4094 40 28
+DS 17717 -2402 19921 -2402 40 28
 DS 19921 -4094 19291 -4094 40 28
 DS 19291 -4094 19291 -6102 40 28
 DS 19291 -6102 18307 -6102 40 28
@@ -604,7 +604,6 @@ DS 13071 1969 17441 1969 40 28
 DS 11811 1693 11811 -2480 40 28
 DS 11811 -2480 12795 -2480 40 28
 DS 12795 -2480 12795 1693 40 28
-DS -17717 1693 -17717 -2165 40 28
 DS -13071 1969 -17441 1969 40 28
 DS -11811 1693 -11811 -2480 40 28
 DS -11811 -2480 -12795 -2480 40 28
@@ -1147,4 +1146,614 @@ Po 14331 -3780
 Le 23484672
 $EndPAD
 $EndMODULE  SNESCART_EXT2
+$MODULE SNESCART_EXT2_SMTUSB
+Po 0 0 0 15 4F34E870 00000000 ~~
+Li SNESCART_EXT2_SMTUSB
+Sc 00000000
+AR /4B6E16F2/4B6E1766
+Op 0 0 0
+.SolderMask 4
+.SolderPaste -4
+T0 -4134 2953 600 600 0 120 N V 21 N "J101"
+T1 0 2953 600 600 0 120 N V 21 N "SNESCART_EXT"
+DS 8858 -29252 19291 -29252 39 28
+DS 8622 -30709 8858 -30709 39 28
+DS -20039 -5000 -20039 -8898 39 28
+DS -18465 -4016 -18465 -5000 39 28
+DS -19449 -2402 -19449 -4016 39 28
+DS -17717 -2402 -17717 1693 39 28
+DS 17717 -2402 17717 1693 39 28
+DS 19921 -4094 19921 -2402 39 28
+DS 19291 -29252 19291 -27756 39 28
+DS -19488 -29252 -19488 -27756 39 28
+DS -8524 -30709 -8524 -29252 39 28
+DS 8858 -29252 8858 -30709 39 28
+DS -20039 -24409 -20039 -12244 39 28
+DS -19488 -27087 -19488 -24409 39 28
+DC 1142 -11378 1929 -11378 79 20
+DC 1142 -11378 1929 -11339 79 21
+DS 19921 -24409 19921 -8976 39 28
+DS 19291 -27087 19291 -24409 39 28
+DS 19291 -24409 19921 -24409 39 28
+DS 18307 -6890 19291 -6890 39 28
+DS 19291 -8189 19291 -6890 39 28
+DS 18307 -8189 19291 -8189 39 28
+DS 18307 -8976 18307 -8189 39 28
+DS 19921 -8976 18307 -8976 39 28
+DS -18465 -12244 -20039 -12244 39 28
+DS -18465 -11457 -18465 -12244 39 28
+DS -19449 -11457 -18465 -11457 39 28
+DS -19449 -8898 -19449 -11457 39 28
+DS -20039 -8898 -19449 -8898 39 28
+DA -17441 1693 -17441 1969 900 39 28
+DA -13071 1693 -12795 1693 900 39 28
+DA -11535 1693 -11535 1969 900 39 28
+DA 11535 1693 11811 1693 900 39 28
+DA 13071 1693 13071 1969 900 39 28
+DA 17441 1693 17717 1693 900 39 28
+DS -8524 -30709 8622 -30709 40 28
+DS -19488 -29252 -8524 -29252 40 28
+DC 2796 -17047 3583 -17047 75 20
+DC 2795 -17047 3582 -17047 75 21
+DS -19488 -27756 -18504 -27756 40 28
+DS -18504 -27756 -18504 -27087 40 28
+DS -18504 -27087 -19488 -27087 40 28
+DS -19488 -24409 -20039 -24409 40 28
+DS -20039 -5000 -18465 -5000 40 28
+DS -18465 -4016 -19449 -4016 40 28
+DS -19449 -2402 -17717 -2402 40 28
+DS 19291 -27087 18307 -27087 40 28
+DS 18307 -27087 18307 -27756 40 28
+DS 18307 -27756 19291 -27756 40 28
+DS 17717 -2402 19921 -2402 40 28
+DS 19921 -4094 19291 -4094 40 28
+DS 19291 -4094 19291 -6102 40 28
+DS 19291 -6102 18307 -6102 40 28
+DS 18307 -6102 18307 -6890 40 28
+DS 13071 1969 17441 1969 40 28
+DS 11811 1693 11811 -2480 40 28
+DS 11811 -2480 12795 -2480 40 28
+DS 12795 -2480 12795 1693 40 28
+DS -13071 1969 -17441 1969 40 28
+DS -11811 1693 -11811 -2480 40 28
+DS -11811 -2480 -12795 -2480 40 28
+DS -12795 -2480 -12795 1693 40 28
+DS -11535 1969 11535 1969 40 28
+$PAD
+Sh "1" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 50 "/SNES_Slot/SNES_EXT_SYS_CLK"
+Po -16732 197
+Le 19
+$EndPAD
+$PAD
+Sh "2" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 0 ""
+Po -15748 197
+Le 86
+$EndPAD
+$PAD
+Sh "3" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 47 "/SNES_Slot/SNES_EXT_PA6"
+Po -14764 197
+Le 98
+$EndPAD
+$PAD
+Sh "4" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 3 "/SNES_Slot/SNES_EXT_/PARD"
+Po -13780 197
+Le 353
+$EndPAD
+$PAD
+Sh "5" R 787 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 57 "GND"
+Po -10925 197
+Le 46326
+$EndPAD
+$PAD
+Sh "6" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 11 "/SNES_Slot/SNES_EXT_A11"
+Po -9843 197
+Le 41840
+$EndPAD
+$PAD
+Sh "7" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 10 "/SNES_Slot/SNES_EXT_A10"
+Po -8858 197
+Le 33
+$EndPAD
+$PAD
+Sh "8" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 31 "/SNES_Slot/SNES_EXT_A9"
+Po -7874 197
+Le 10
+$EndPAD
+$PAD
+Sh "9" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 30 "/SNES_Slot/SNES_EXT_A8"
+Po -6890 197
+Le 40686
+$EndPAD
+$PAD
+Sh "10" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 29 "/SNES_Slot/SNES_EXT_A7"
+Po -5906 197
+Le 32
+$EndPAD
+$PAD
+Sh "11" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 28 "/SNES_Slot/SNES_EXT_A6"
+Po -4921 197
+Le 26720752
+$EndPAD
+$PAD
+Sh "12" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 27 "/SNES_Slot/SNES_EXT_A5"
+Po -3937 197
+Le 44474
+$EndPAD
+$PAD
+Sh "13" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 26 "/SNES_Slot/SNES_EXT_A4"
+Po -2953 197
+Le 41300
+$EndPAD
+$PAD
+Sh "14" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 25 "/SNES_Slot/SNES_EXT_A3"
+Po -1969 197
+Le 26690192
+$EndPAD
+$PAD
+Sh "15" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 20 "/SNES_Slot/SNES_EXT_A2"
+Po -984 197
+Le 778140282
+$EndPAD
+$PAD
+Sh "16" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 9 "/SNES_Slot/SNES_EXT_A1"
+Po 0 197
+Le 45976
+$EndPAD
+$PAD
+Sh "17" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 8 "/SNES_Slot/SNES_EXT_A0"
+Po 984 197
+Le 26692384
+$EndPAD
+$PAD
+Sh "18" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 2 "/SNES_Slot/SNES_EXT_/IRQ"
+Po 1969 197
+Le 33
+$EndPAD
+$PAD
+Sh "19" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 33 "/SNES_Slot/SNES_EXT_D0"
+Po 2953 197
+Le 101
+$EndPAD
+$PAD
+Sh "20" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 34 "/SNES_Slot/SNES_EXT_D1"
+Po 3937 197
+Le 72
+$EndPAD
+$PAD
+Sh "21" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 35 "/SNES_Slot/SNES_EXT_D2"
+Po 4921 197
+Le 1362898584
+$EndPAD
+$PAD
+Sh "22" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 36 "/SNES_Slot/SNES_EXT_D3"
+Po 5906 197
+Le 193
+$EndPAD
+$PAD
+Sh "23" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 5 "/SNES_Slot/SNES_EXT_/RD"
+Po 6890 197
+Le 1
+$EndPAD
+$PAD
+Sh "24" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 56 "EXT_CIC_DATA1"
+Po 7874 197
+Le -268371600
+$EndPAD
+$PAD
+Sh "25" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 54 "CIC_RESET"
+Po 8858 197
+Le 44216
+$EndPAD
+$PAD
+Sh "26" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 58 "SNES_/RESET"
+Po 9843 197
+Le 26710224
+$EndPAD
+$PAD
+Sh "27" R 787 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 1 "+5VL"
+Po 10925 197
+Le -268358496
+$EndPAD
+$PAD
+Sh "28" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 41 "/SNES_Slot/SNES_EXT_PA0"
+Po 13780 197
+Le 40657
+$EndPAD
+$PAD
+Sh "29" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 43 "/SNES_Slot/SNES_EXT_PA2"
+Po 14764 197
+Le 42
+$EndPAD
+$PAD
+Sh "30" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 45 "/SNES_Slot/SNES_EXT_PA4"
+Po 15748 197
+Le 27776368
+$EndPAD
+$PAD
+Sh "31" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00008000
+Ne 51 "AUDIO_L"
+Po 16732 197
+Le 1376453976
+$EndPAD
+$PAD
+Sh "32" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 0 ""
+Po -16732 197
+Le -65794
+$EndPAD
+$PAD
+Sh "33" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 49 "/SNES_Slot/SNES_EXT_REFRESH"
+Po -15748 197
+Le -197380
+$EndPAD
+$PAD
+Sh "34" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 48 "/SNES_Slot/SNES_EXT_PA7"
+Po -14764 197
+Le 26706208
+$EndPAD
+$PAD
+Sh "35" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 4 "/SNES_Slot/SNES_EXT_/PAWR"
+Po -13780 197
+Le 48
+$EndPAD
+$PAD
+Sh "36" R 787 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 57 "GND"
+Po -10925 197
+Le 26698352
+$EndPAD
+$PAD
+Sh "37" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 12 "/SNES_Slot/SNES_EXT_A12"
+Po -9843 197
+Le 26703872
+$EndPAD
+$PAD
+Sh "38" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 13 "/SNES_Slot/SNES_EXT_A13"
+Po -8858 197
+Le 2513
+$EndPAD
+$PAD
+Sh "39" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 14 "/SNES_Slot/SNES_EXT_A14"
+Po -7874 197
+Le 48
+$EndPAD
+$PAD
+Sh "40" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 15 "/SNES_Slot/SNES_EXT_A15"
+Po -6890 197
+Le 14164224
+$EndPAD
+$PAD
+Sh "41" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 16 "/SNES_Slot/SNES_EXT_A16"
+Po -5906 197
+Le 14319616
+$EndPAD
+$PAD
+Sh "42" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 17 "/SNES_Slot/SNES_EXT_A17"
+Po -4921 197
+Le 14154752
+$EndPAD
+$PAD
+Sh "43" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 18 "/SNES_Slot/SNES_EXT_A18"
+Po -3937 197
+Le 192512
+$EndPAD
+$PAD
+Sh "44" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 19 "/SNES_Slot/SNES_EXT_A19"
+Po -2953 197
+Le 39524
+$EndPAD
+$PAD
+Sh "45" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 21 "/SNES_Slot/SNES_EXT_A20"
+Po -1969 197
+Le 1077956333
+$EndPAD
+$PAD
+Sh "46" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 22 "/SNES_Slot/SNES_EXT_A21"
+Po -984 197
+Le 39959
+$EndPAD
+$PAD
+Sh "47" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 23 "/SNES_Slot/SNES_EXT_A22"
+Po 0 197
+Le 1077938791
+$EndPAD
+$PAD
+Sh "48" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 24 "/SNES_Slot/SNES_EXT_A23"
+Po 984 197
+Le 40274
+$EndPAD
+$PAD
+Sh "49" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 6 "/SNES_Slot/SNES_EXT_/ROMSEL"
+Po 1969 197
+Le 40357
+$EndPAD
+$PAD
+Sh "50" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 37 "/SNES_Slot/SNES_EXT_D4"
+Po 2953 197
+Le 40449
+$EndPAD
+$PAD
+Sh "51" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 38 "/SNES_Slot/SNES_EXT_D5"
+Po 3937 197
+Le 1077956333
+$EndPAD
+$PAD
+Sh "52" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 39 "/SNES_Slot/SNES_EXT_D6"
+Po 4921 197
+Le 23484672
+$EndPAD
+$PAD
+Sh "53" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 40 "/SNES_Slot/SNES_EXT_D7"
+Po 5906 197
+Le 23484672
+$EndPAD
+$PAD
+Sh "54" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 7 "/SNES_Slot/SNES_EXT_/WR"
+Po 6890 197
+Le 23484672
+$EndPAD
+$PAD
+Sh "55" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 55 "EXT_CIC_DATA0"
+Po 7874 197
+Le 23484672
+$EndPAD
+$PAD
+Sh "56" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 53 "CIC_CLK"
+Po 8858 197
+Le 23484672
+$EndPAD
+$PAD
+Sh "57" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 32 "/SNES_Slot/SNES_EXT_CPU_CLK"
+Po 9843 197
+Le 23484672
+$EndPAD
+$PAD
+Sh "58" R 787 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 1 "+5VL"
+Po 10925 197
+Le 23484672
+$EndPAD
+$PAD
+Sh "59" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 42 "/SNES_Slot/SNES_EXT_PA1"
+Po 13780 197
+Le 23484672
+$EndPAD
+$PAD
+Sh "60" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 44 "/SNES_Slot/SNES_EXT_PA3"
+Po 14764 197
+Le 23484672
+$EndPAD
+$PAD
+Sh "61" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 46 "/SNES_Slot/SNES_EXT_PA5"
+Po 15748 197
+Le 1077941145
+$EndPAD
+$PAD
+Sh "62" R 591 2756 0 0 0
+Dr 0 0 0
+At CONN N 00000001
+Ne 52 "AUDIO_R"
+Po 16732 197
+Le 23484672
+$EndPAD
+$PAD
+Sh "" R 4921 3150 0 0 0
+Dr 0 0 0
+At CONN N 00C00000
+Ne 0 ""
+Po -15256 394
+Le 23484672
+$EndPAD
+$PAD
+Sh "" R 4921 3150 0 0 0
+Dr 0 0 0
+At CONN N 00C00000
+Ne 0 ""
+Po 15256 394
+Le 23484672
+$EndPAD
+$PAD
+Sh "" R 23622 3150 0 0 0
+Dr 0 0 0
+At CONN N 00C00000
+Ne 0 ""
+Po 0 394
+Le 23484672
+$EndPAD
+$PAD
+Sh "" R 2362 1969 0 0 0
+Dr 0 0 0
+At CONN N 00400000
+Ne 0 ""
+Po -10945 -3819
+Le 23484672
+$EndPAD
+$PAD
+Sh "" R 2283 2362 0 0 0
+Dr 0 0 0
+At CONN N 00400000
+Ne 0 ""
+Po 14331 -3780
+Le 23484672
+$EndPAD
+$EndMODULE  SNESCART_EXT2_SMTUSB
 $EndLIBRARY

snes/Makefile

@@ -1,4 +1,4 @@
-OBJS = header.ips reset.o65 main.o65 font.o65 palette.o65 data.o65 const.o65 logo.o65 logospr.o65 text.o65 dma.o65 menu.o65 pad.o65 time.o65 mainmenu.o65 sysinfo.o65 # gfx.o65 # vars.o65
+OBJS = header.ips reset.o65 main.o65 font.o65 palette.o65 data.o65 const.o65 logo.o65 logospr.o65 text.o65 dma.o65 filesel.o65 pad.o65 time.o65 mainmenu.o65 sysinfo.o65 spc700.o65 spcplay.o65 # gfx.o65 # vars.o65
 
 all: clean menu.bin map
 

snes/boot/const.a65

@@ -2,7 +2,8 @@ version		.byt "                            v0.1",0
 zero		.word	0
 bg2tile		.byt $20
 
-space64	.byt $20, $20, $20, $20, $20, $20, $20, $20
+space64	
+    .byt $20, $20, $20, $20, $20, $20, $20, $20
 	.byt $20, $20, $20, $20, $20, $20, $20, $20
 	.byt $20, $20, $20, $20, $20, $20, $20, $20
 	.byt $20, $20, $20, $20, $20, $20, $20, $20

snes/boot/data.a65

@@ -1,41 +1,43 @@
 .data
 ;don't anger the stack!
 ;----------parameters for text output----------
-print_x	.byt 0		;x coordinate
-	.byt 0
-print_y	.byt 0		;y coordinate
-	.byt 0
-print_src	.word 0	;source data address
-print_bank	.byt 0	;source data bank
-print_pal	.word 0	;palette number for text output
-print_temp	.word 0 ;work variable
-print_count	.byt 0	;how many characters may be printed?
-print_count_tmp .byt 0	;work variable
-print_done	.word 0  ;how many characters were printed?
+print_x         .byt  0  ; x coordinate
+                .byt  0
+print_y         .byt  0  ; y coordinate
+                .byt  0
+print_src       .word 0  ; source data address
+print_bank      .byt  0  ; source data bank
+print_pal       .word 0  ; palette number for text output
+print_temp      .word 0  ; work variable
+print_count     .byt  0  ; how many characters may be printed?
+print_count_tmp .byt  0  ; work variable
+print_done      .word 0  ; how many characters were printed?
 ;----------parameters for dma----------
-dma_a_bank	.byt 0
-dma_a_addr	.word 0
-dma_b_reg	.byt 0
-dma_len		.word 0
-dma_mode	.byt 0
+dma_a_bank      .byt  0
+dma_a_addr      .word 0
+dma_b_reg       .byt  0
+dma_len         .word 0
+dma_mode        .byt  0
 
 ;----------state information----------
-isr_done	.byt 0  ; isr done flag
+isr_done        .byt  0  ; isr done flag
 ;----------menu layout/system constants (224/448)
-textdmasize	.word 0 ; number of bytes to copy each frame
+textdmasize     .word 0 ; number of bytes to copy each frame
 
-infloop		.byt 0,0  ; to be filled w/ 80 FE
+infloop         .byt 0,0  ; to be filled w/ 80 FE
 
-printloop_wram	.byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-		.byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-		.byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-		.byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-		.byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-		.byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-		.byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+printloop_wram 
+      .byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+      .byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+      .byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+      .byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+      .byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+      .byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+      .byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
 
-loprint_wram	.byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-		.byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-		.byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-		.byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-		.byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+loprint_wram 
+      .byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+      .byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+      .byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+      .byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+      .byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0

snes/boot/palette.a65

@@ -1,4 +1,4 @@
 palette
 ;fonts
 	.byt  $42, $08, $ff, $7f, $00, $00, $9c, $73
-        .byt  $42, $08, $ff, $43, $00, $00, $18, $63
+    .byt  $42, $08, $ff, $43, $00, $00, $18, $63

snes/boot/reset.a65

@@ -11,24 +11,24 @@
 
 ; NMI - called on VBlank
 NMI_ROUTINE:
-        sep #$20 : .as
-	rep #$10 : .xl
-	lda #$00
-	pha
-	plb
-        lda $4210
+    sep #$20 : .as
+    rep #$10 : .xl
+    lda #$00
+    pha
+    plb
+    lda $4210
 
-	ldx #BG1_TILE_BASE
-	stx $2116
-	DMA0(#$01, #36*64, #^BG1_TILE_BUF, #!BG1_TILE_BUF, #$18)
+    ldx #BG1_TILE_BASE
+    stx $2116
+    DMA0(#$01, #36*64, #^BG1_TILE_BUF, #!BG1_TILE_BUF, #$18)
 
-	lda #$01
-	sta isr_done
-        rtl
+    lda #$01
+    sta isr_done
+    rtl
 
 ; IRQ - called when triggered
 IRQ_ROUTINE:
-        sep #$20 : .as
-        lda $4211  ;Acknowledge irq
-        rtl
+    sep #$20 : .as
+    lda $4211  ;Acknowledge irq
+    rtl
 

snes/const.a65

@@ -3,7 +3,7 @@ zero		.word	0
 bg2tile		.byt $20
 hdma_pal_src	.byt 44
 		.byt $60, $2d
-		.byt 14
+		.byt 10
 		.byt $00, $00
 		.byt 2
 		.byt $60, $2d
@@ -29,7 +29,7 @@ hdma_pal_src	.byt 44
 		.byt $20, $25
 		.byt 11
 		.byt $40, $29
-		.byt 31
+		.byt 29
 		.byt $60, $2d
 		.byt 2
 		.byt $20, $04
@@ -69,11 +69,11 @@ hdma_cg_addr_src
 		.byt $00, $00, $00, $00, $00, $00, $00, $00
 		.byt $00, $00, $00, $00, $00, $00, $00, $00
 		.byt $00
-hdma_mode_src	.byt 64, $03, $01, $05, $00
-hdma_scroll_src	.byt 64
-		.byt $00, $00, $ff, $0f
+hdma_mode_src	.byt 56, $03, $01, $05, $00
+hdma_scroll_src	.byt 56
+		.byt $00, $00, $ff, $03
 		.byt $01
-		.byt $fc, $00, $05, $00
+		.byt $fc, $00, $1f, $03
 		.byt $00
 ; colors:
 ; upper border: + #547fff -> 10,15,31
@@ -93,30 +93,31 @@ hdma_math_src	.byt 1 ; these are filled in...
 		.byt $00, $e0
 		.byt 0
 
-oam_data_l	.byt 75, 56, 31, $0e
-		.byt 83, 56, 1, $0e
-		.byt 91, 56, 2, $0e
-		.byt 99, 56, 3, $0e
-		.byt 107, 56, 4, $0e
-		.byt 115, 56, 5, $0e
-		.byt 123, 56, 6, $0e
-		.byt 131, 56, 7, $0e
-		.byt 75, 64, 8, $0e
-		.byt 83, 64, 9, $0e
-		.byt 91, 64, 10, $0e
-		.byt 99, 64, 11, $0e
-		.byt 107, 64, 12, $0e
-		.byt 115, 64, 13, $0e
-		.byt 123, 64, 14, $0e
-		.byt 131, 64, 15, $0e
-		.byt 75, 72, 16, $0e
-		.byt 83, 72, 17, $0e
-		.byt 91, 72, 18, $0e
-		.byt 99, 72, 19, $0e
-		.byt 75, 80, 24, $0e
-		.byt 83, 80, 25, $0e
-		.byt 91, 80, 26, $0e
-oam_data_h	.byt 0, 0, 0, 0, 0, 0, 0, 0
+oam_data_l	.byt 88, 56, 0, $08
+		.byt 96, 56, 1, $08
+		.byt 104, 56, 2, $08
+		.byt 112, 56, 3, $08
+		.byt 120, 56, 4, $08
+		.byt 128, 56, 5, $08
+		.byt 136, 56, 6, $08
+		.byt 88, 64, 7, $08
+		.byt 96, 64, 8, $08
+		.byt 104, 64, 9, $08
+		.byt 112, 64, 10, $08
+		.byt 88, 72, 14, $08
+		.byt 96, 72, 15, $08
+		.byt 157, 56, 21, $0a
+		.byt 171, 56, 22, $0c
+		.byt 179, 56, 23, $0c
+		.byt 171, 64, 24, $0c
+		.byt 171, 72, 26, $0c
+		.byt 171, 80, 28, $0c
+		.byt 171, 88, 30, $0c
+		.byt 171, 96, 32, $0c
+		.byt 193, 56, 34, $0e
+		.byt 193, 64, 35, $0e
+		.byt 193, 72, 36, $0e
+oam_data_h	.byt 0, 0, 0, 0, 0, 0, 0, 0, 0
 
 space64	.byt $20, $20, $20, $20, $20, $20, $20, $20
 	.byt $20, $20, $20, $20, $20, $20, $20, $20
@@ -153,6 +154,10 @@ sysinfo_win_x	.byt 10
 sysinfo_win_y	.byt 9
 sysinfo_win_w	.byt 43
 sysinfo_win_h	.byt 17
+last_win_x	.byt 2
+last_win_y	.byt 12
+last_win_w	.byt 60
+last_win_h	.byt 5
 
 text_mm_file		.byt "File Browser", 0
 text_mm_last		.byt "Run last game", 0
@@ -162,3 +167,25 @@ text_mm_vmode_menu	.byt "Menu video mode", 0
 text_mm_vmode_game	.byt "Game video mode", 0
 text_mm_sysinfo		.byt "System Information", 0
 text_statusbar_keys	.byt "A:Select B:Back X:Menu", 0
+text_last		.byt "Run previous ROM: Press Start again to confirm", 0
+text_system		.byt "CPU Rev.: x  PPU1 Rev.: y  PPU2 Rev.: z",0
+
+
+text_spcplay		.byt "SPC Music Player", 0
+spcplay_win_x		.byt 15
+spcplay_win_y		.byt 15
+spcplay_win_w		.byt 33
+spcplay_win_h		.byt 5
+
+text_spcload		.byt "Loading SPC data to SPC700...", 0
+text_spcstarta		.byt "**** Now playing SPC tune ****", 0
+text_spcstartb		.byt "Name:  ",0
+text_spcstartc		.byt "Song:  ",0
+text_spcstartd		.byt "Artist:",0
+
+spcstart_win_x		.byt 10
+spcstart_win_y		.byt 13
+spcstart_win_w		.byt 44
+spcstart_win_h		.byt 9
+
+text_spcid		.byt "SNES-SPC700"

snes/data.a65

@@ -14,7 +14,9 @@ dirent_bank	.word	0
 dirent_type	.byt 0
 dirend_onscreen	.byt 0
 dirlog_idx	.byt 0,0,0 ; long ptr
-
+direntry_fits_idx
+		.byt 0,0
+longptr		.byt 0,0,0 ; general purpose long ptr
 ;----------parameters for text output----------
 print_x	.byt 0		;x coordinate
 	.byt 0
@@ -24,9 +26,10 @@ print_src	.word 0	;source data address
 print_bank	.byt 0	;source data bank
 print_pal	.word 0	;palette number for text output
 print_temp	.word 0 ;work variable
-print_count	.byt 0	;how many characters may be printed?
-print_count_tmp .byt 0	;work variable
-print_done	.word 0  ;how many characters were printed?
+print_ptr	.byt 0,0,0 ;read pointer
+print_count	.word 0	;how many characters may be printed?
+print_done	.word 0 ;how many characters were printed?
+print_over	.byt 0  ;was the string printed incompletely?
 ;----------parameters for dma----------
 dma_a_bank	.byt 0
 dma_a_addr	.word 0
@@ -42,9 +45,9 @@ bar_x		.byt 0	; pixel x position of select bar
 bar_y		.byt 0	; pixel y position of select bar
 bar_w		.byt 0	; bar width
 bar_wl		.byt 0	; bar width
-menu_state	.byt 0	; menu state (0=file select)
-menu_dirty	.byt 0	; menu dirty (e.g. after state change or when redraw is needed)
-menu_sel	.word 0 ; selected item #
+filesel_state	.byt 0	; menu state (0=file select)
+filesel_dirty	.byt 0	; menu dirty (e.g. after state change or when redraw is needed)
+filesel_sel	.word 0 ; selected item #
 cursor_x	.byt 0	; current cursor position (x)
 cursor_y	.byt 0  ; current cursor position (y)
 fd_addr		.word 0	; address of current "file descriptor"
@@ -93,6 +96,8 @@ barstep		.byt 0  ; step size for bar
 
 ;-misc
 testvar		.word 0,0,0,0
+;menu system
+menu_stack	.word 0,0,0,0,0,0,0,0
 ;----------hdma tables in WRAM (must be stable when cartridge is cut off)
 hdma_pal	.byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
 		.byt 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
@@ -171,5 +176,27 @@ dirlog  .word	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
 	.word	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
 	.word	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
 
-infloop		.byt 0,0  ; to be filled w/ 80 FE
+direntry_fits
+	.byt	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+	.byt	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+direntry_xscroll_state
+	.word	0
+direntry_xscroll
+	.word	0
+direntry_xscroll_wait
+	.word	0
+infloop	.byt 0,0  ; to be filled w/ 80 FE
+tgt_bright
+	.byt 0
+cur_bright
+	.byt 0
+
+;------------------------
+saved_sp
+	.word 0
+warm_signature
+	.word 0
+snes_system_config
+	.word 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+
 wram_fadeloop	.byt 0

snes/dma.a65

@@ -1,21 +1,4 @@
 
-dma0:
-	rep #$10 : .xl
-	sep #$20 : .as
-	lda dma_mode
-	sta $4300
-	lda dma_b_reg
-	sta $4301
-	lda dma_a_bank
-	ldx dma_a_addr
-	stx $4302
-	sta $4304
-	ldx dma_len
-	stx $4305
-	lda #$01
-	sta $420b
-	rts
-
 setup_hdma:
 	sep #$20 : .as
 	rep #$10 : .xl
@@ -67,8 +50,11 @@ setup_hdma:
 	sty $4352
 	sta $4354
 
-;	lda #$06
-;	sta $420c		;enable HDMA ch. 1+2
+	lda #$3a
+	sta $420c		;enable HDMA ch. 1+3+4+5
+	jsr waitblank
+	lda #$3e
+	sta $420c		;enable HDMA ch. 2 too
 	lda #$81		;VBlank NMI + Auto Joypad Read
 	sta $4200		;enable V-BLANK NMI
 	rts

snes/dma.i65

@@ -1,13 +1,22 @@
+#define hash #
+#define f(x) x
+#define imm(a) f(hash)a
+
 #define DMA0(mode, len, a_bank, a_addr, b_reg)\
-	lda mode \
-: 	sta dma_mode \
+	php \
+:	sep imm($20) : .as \
+:	rep imm($10) : .xl \
+:	lda mode \
+: 	sta $4300 \
 :	ldx a_addr \
 :	lda a_bank \
-:	stx dma_a_addr \
-:	sta dma_a_bank \
+:	stx $4302 \
+:	sta $4304 \
 :	ldx len \
-:	stx dma_len \
+:	stx $4305 \
 :	lda b_reg \
-:	sta dma_b_reg \
-:	jsr dma0
+:	sta $4301 \
+:	lda imm($01) \
+:	sta $420b \
+:	plp
 

snes/filesel.a65

@@ -1,7 +1,7 @@
 #include "memmap.i65"
 #include "dma.i65"
 
-menu_init:
+filesel_init:
 	sep #$20 : .as
 	rep #$10 : .xl
 	lda #^ROOT_DIR
@@ -10,7 +10,7 @@ menu_init:
 	stx dirptr_addr
 	sta dirstart_bank
 	stx dirstart_addr
-	stz menu_state
+	stz filesel_state
 	stz dirend_onscreen
 	lda #$02
 	sta cursor_x
@@ -22,9 +22,11 @@ menu_init:
 	sta bar_wl
 	ldx #$0000
 	stx dirptr_idx
-	stx menu_sel
+	stx filesel_sel
+	stx direntry_xscroll
+	stx direntry_xscroll_state
 	lda #$01
-	sta menu_dirty
+	sta filesel_dirty
 	rep #$20 : .al
 	lda #!dirlog
 	sta dirlog_idx
@@ -33,39 +35,39 @@ menu_init:
 	sta dirlog_idx+2
 	rts
 
-menuloop:
-menuloop_s1
+fileselloop:
+fileselloop_s1
 	sep #$20 : .as
 	rep #$10 : .xl
 	lda isr_done
 	lsr
-	bcc menuloop_s1
-
+	bcc fileselloop_s1
 	stz isr_done
 	jsr printtime
-	jsr menu_updates	;update stuff, check keys etc
-	lda menu_dirty		;is there ANY reason to redraw the menu?
+	jsr filesel_updates	;update stuff, check keys etc
+	lda filesel_dirty		;is there ANY reason to redraw the menu?
 	cmp #$01
-	beq menuloop_redraw 	;then do
-	bra menuloop_s1
-menuloop_redraw
-	stz menu_dirty
-	jsr menu_statusbar
-	jsr menu_redraw
-	jsr menu_cleanup	;update phase 2
-	bra menuloop_s1
+	beq fileselloop_redraw 	;then do
+	jsr scroll_direntry
+	bra fileselloop_s1
+fileselloop_redraw
+	stz filesel_dirty
+	jsr filesel_statusbar
+	jsr filesel_redraw
+	jsr filesel_cleanup	;update phase 2
+	bra fileselloop_s1
 	rts
 
-menu_cleanup:
+filesel_cleanup:
 	sep #$20 : .as
 	rep #$10 : .xl
 	lda dirend_onscreen     ;end of file list on screen?
-	beq menu_cleanup_out    ;
+	beq filesel_cleanup_out    ;
 	lda dirend_idx
 	lsr
 	lsr
 	pha
-menu_cleanup_loop               ;pad rest of screen with empty lines
+filesel_cleanup_loop               ;pad rest of screen with empty lines
 	cmp listdisp            ;end of screen reached?
 	beq +                   ;then leave
 	pha
@@ -84,24 +86,24 @@ menu_cleanup_loop               ;pad rest of screen with empty lines
 	jsr hiprint
 	pla
 	inc
-	bra menu_cleanup_loop
+	bra filesel_cleanup_loop
 +
 	pla
-	cmp menu_sel
-	beq menu_cleanup_out
-	bpl menu_cleanup_out
-	sta menu_sel
-menu_cleanup_out
+	cmp filesel_sel
+	beq filesel_cleanup_out
+	bpl filesel_cleanup_out
+	sta filesel_sel
+filesel_cleanup_out
 	rts
 
 
-menu_updates:
+filesel_updates:
 ;update selection, scroll etc
-	lda menu_sel
+	lda filesel_sel
 	asl
 	asl
 	sta dirptr_idx
-	lda menu_sel
+	lda filesel_sel
 	clc
 	adc #$08
 	sta bar_yl
@@ -126,6 +128,9 @@ menu_updates:
 	lda #$80
 	and pad1trig+1
 	bne key_b
+	lda #$10
+	and pad1trig+1
+	bne key_start
 	lda #$20
 	and pad1trig+1
 	bne key_select
@@ -135,50 +140,53 @@ menu_updates:
 	lda #$40
 	and pad1trig
 	bne key_x
-	bra menuupd_out
+	bra fileselupd_out
 key_down
-	jsr menu_key_down
-	bra menuupd_out
+	jsr filesel_key_down
+	bra fileselupd_out
 key_up
-	jsr menu_key_up
-	bra menuupd_out
+	jsr filesel_key_up
+	bra fileselupd_out
 key_right
-	jsr menu_key_right
-	bra menuupd_out
+	jsr filesel_key_right
+	bra fileselupd_out
 key_left
-	jsr menu_key_left
-	bra menuupd_out
+	jsr filesel_key_left
+	bra fileselupd_out
 key_b
-	jsr menu_key_b
-	bra menuupd_out
+	jsr filesel_key_b
+	bra fileselupd_out
 key_a
-	jsr menu_key_a
-	bra menuupd_out
+	jsr filesel_key_a
+	bra fileselupd_out
 key_x
-	jsr menu_key_x
-	bra menuupd_out
-
+	jsr filesel_key_x
+	bra fileselupd_out
 key_select
-	jsr menu_key_select
-	bra menuupd_out
+	jsr filesel_key_select
+	bra fileselupd_out
+key_start
+	jsr filesel_key_start
+	bra fileselupd_out
 
-menuupd_out
+fileselupd_out
 	lda #$09
 	sta cursor_y
 	rts
 
 
-menu_redraw:
-	lda menu_state
+filesel_redraw:
+	lda filesel_state
 	beq redraw_filelist
 ;	cmp 1
 ;	beq redraw_main
-menu_redraw_out
+filesel_redraw_out
 	rts
 
 redraw_filelist
 	ldy #$0000
 	sty dirptr_idx
+	sty direntry_fits_idx
 	stz dirend_idx
 	stz dirend_onscreen
 redraw_filelist_loop
@@ -206,6 +214,7 @@ redraw_filelist_loop
 	sta @dirent_type
 	sty dirptr_idx
 	jsr print_direntry
+	inc direntry_fits_idx
 	bra redraw_filelist_loop
 redraw_filelist_dirend
 	dey                        ; recover last valid direntry number
@@ -227,7 +236,7 @@ redraw_filelist_last	;check if next offscreen item is end of dir
 redraw_filelist_out
 	ldx #$0000
 	stx dirptr_idx
-	brl menu_redraw_out
+	brl filesel_redraw_out
 
 print_direntry:
         lda cursor_y
@@ -262,6 +271,10 @@ dirent_is_file
 	lda #$0000
 	bra dirent_type_cont
 +
+	cmp #$0003  ;SPC -> palette 2
+	bne +
+	lda #$0002
+	bra dirent_type_cont
 	cmp #$0004	;IPS -> palette 2 (green)
 	bne +
         lda #$0002
@@ -284,6 +297,8 @@ dirent_type_cont
 	txa
 	clc
 	adc @fd_fnoff
+	clc
+	adc @direntry_xscroll
 	sta @fd_fnoff
 	plb
 
@@ -298,12 +313,14 @@ dirent_type_cont
 	lda dirent_bank
 	sta print_bank
 	jsr hiprint
-
 	lda cursor_x
 	clc
 	adc print_done
 	sta print_x
 
+	lda print_over
+	ldy direntry_fits_idx
+	sta !direntry_fits, y
 	lda #54
 	sec
 	sbc print_done
@@ -338,13 +355,14 @@ dirent_type_cont_2
 
 	rts
 
-menu_key_down:
+filesel_key_down:
+	jsr scroll_direntry_clean
 	lda listdisp
 	dec
-	cmp menu_sel
+	cmp filesel_sel
 	bne down_noscroll
 	lda #$01
-	sta menu_dirty
+	sta filesel_dirty
 	lda dirend_onscreen
 	bne down_out
 	rep #$20 : .al
@@ -362,20 +380,21 @@ down_noscroll
 	lda dirend_idx
 	lsr
 	lsr
-	cmp menu_sel
-	beq menuupd_lastcursor
-	bcc menuupd_lastcursor
-+	lda menu_sel
+	cmp filesel_sel
+	beq fileselupd_lastcursor
+	bcc fileselupd_lastcursor
++	lda filesel_sel
 	inc
-	sta menu_sel
+	sta filesel_sel
 down_out
 	rts
 
-menu_key_up:
-	lda menu_sel
+filesel_key_up:
+	jsr scroll_direntry_clean
+	lda filesel_sel
 	bne up_noscroll
 	lda #$01
-	sta menu_dirty
+	sta filesel_dirty
 	rep #$20 : .al
 	lda dirptr_addr
 	cmp dirstart_addr
@@ -388,22 +407,25 @@ menu_key_up:
 	bra up_out
 up_noscroll
 	dec
-	sta menu_sel
+	sta filesel_sel
 up_out
 	sep #$20 : .as
 	rts
 
-menuupd_lastcursor
+fileselupd_lastcursor
+	jsr scroll_direntry_clean
 	lda dirend_idx
 	lsr
 	lsr
-	sta menu_sel
+	sta filesel_sel
 	rts
 
 ; go back one page
-menu_key_left:
+filesel_key_left:
+	stz direntry_xscroll
+	stz direntry_xscroll_state
 	lda #$01            ; must redraw afterwards
-	sta menu_dirty
+	sta filesel_dirty
 	rep #$20 : .al
 	lda dirptr_addr     ; get current direntry pointer
 	beq +               ; special case: if 0, we are at the first entry in memory
@@ -422,16 +444,18 @@ menu_key_left:
 	sep #$20 : .as
 	rts
 +	lda dirstart_addr   ; reset pointer to start of directory
-	stz menu_sel        ; reset the selection cursor too
+	stz filesel_sel        ; reset the selection cursor too
 	bra -
 
 ; go forth one page
-menu_key_right:
+filesel_key_right:
+	stz direntry_xscroll
+	stz direntry_xscroll_state
 	sep #$20 : .as
 	lda dirend_onscreen
-	bne menuupd_lastcursor
+	bne fileselupd_lastcursor
 	lda #$01
-	sta menu_dirty
+	sta filesel_dirty
 	rep #$20 : .al
 	lda listdisp
 	asl
@@ -442,27 +466,26 @@ menu_key_right:
 	sep #$20 : .as
 	rts
 
-menu_key_a:
+filesel_key_a:
 	jsr select_item
 	rts
 
-menu_key_select:
-	lda barstep
-	beq do_setup448
-do_setup224
-	jsr setup_224
-	rts
-do_setup448
-	jsr setup_448
+filesel_key_select:
 	rts
 
-menu_key_b:
+filesel_key_start:
+	jsr select_last_file
+	rts
+
+filesel_key_b:
+	stz direntry_xscroll
+	stz direntry_xscroll_state
 	rep #$20 : .al
 	lda dirstart_addr
 	beq skip_key_b
 	sta dirptr_addr
 	lda #$0000
-	sta menu_sel
+	sta filesel_sel
 	bra select_item
 skip_key_b
 	sep #$20 : .as
@@ -470,7 +493,7 @@ skip_key_b
 
 select_item:
 	rep #$20 : .al
-	lda menu_sel
+	lda filesel_sel
 	and #$00ff
 	asl
 	asl
@@ -482,6 +505,8 @@ select_item:
 	lda [dirptr_addr], y
 	cmp #$01
 	beq sel_is_file
+	cmp #$03
+	beq sel_is_spc
 	cmp #$04
 	beq sel_is_file
 	cmp #$80
@@ -499,24 +524,28 @@ sel_is_parent
 sel_is_dir
 	jsr select_dir
 	bra select_item_cont
+sel_is_spc
+	jsr select_spc
+	bra select_item_cont
 
 select_file:
-	; have avr load the rom
+	; have MCU load the rom
 	dey
 	rep #$20 : .al
 	lda [dirptr_addr], y
 	and #$00ff
-	sta @AVR_PARAM+2
+	sta @MCU_PARAM+2
 	dey
 	dey
 	lda [dirptr_addr], y
-	sta @AVR_PARAM
+	sta @MCU_PARAM
 	sep #$20 : .as
-	lda #$01
-	sta @AVR_CMD
 	lda #$00
 	sta @$4200
 	sei
+	lda #$01
+	sta @MCU_CMD
+select_file_fade:
 	jsl @wram_fadeloop
 	rts
 
@@ -539,7 +568,7 @@ select_dir:
 	lda @dirptr_bank
 	sta [dirlog_idx], y
 	iny
-	lda @menu_sel
+	lda @filesel_sel
 	sta [dirlog_idx], y
 	lda @dirlog_idx
 	clc
@@ -575,10 +604,12 @@ select_dir:
 	sta @dirptr_addr
 	sta @dirstart_addr
 	lda #$0000
-	sta @menu_sel
+	sta @filesel_sel
+	sta @direntry_xscroll
+	sta @direntry_xscroll_state
 	sep #$20 : .as
 	lda #$01
-	sta @menu_dirty
+	sta @filesel_dirty
 	plb
 	rts
 
@@ -607,14 +638,35 @@ select_parent:
 	sta @dirptr_bank
 	iny
 	rep #$20 : .al
-	lda [dirlog_idx], y ; load menu_sel
-	sta @menu_sel
+	lda [dirlog_idx], y ; load filesel_sel
+	sta @filesel_sel
 	sep #$20 : .as
 	lda #$01
-	sta @menu_dirty
+	sta @filesel_dirty
 	rts
 
-menu_key_x:
+select_spc:
+	dey
+	rep #$20 : .al
+	lda [dirptr_addr], y
+	and #$00ff
+	sta @MCU_PARAM+2
+	dey
+	dey
+	lda [dirptr_addr], y
+	sta @MCU_PARAM
+	sep #$20 : .as
+	lda #CMD_LOADSPC
+	sta @MCU_CMD
+wait_spc:
+	lda @MCU_CMD
+	cmp #$00
+	bne wait_spc
+	jsr spcplayer
+	jsr restore_screen
+	rts
+
+filesel_key_x:
 	jsr mainmenu
 	rts
 
@@ -624,18 +676,18 @@ setup_224:
 	lda #18
 	sta listdisp
 	dec
-	cmp menu_sel
+	cmp filesel_sel
 	bmi setup_224_adjsel
 	bra +
 setup_224_adjsel
-	sta menu_sel
+	sta filesel_sel
 +
 	lda #18*64
 	sta textdmasize
-	lda #$0007
+	lda #$000b
 	sta hdma_scroll+8
 	sep #$20 : .as
-	lda #$07
+	lda #$0b
 	sta $2110
 	lda #$00
 	sta $2110
@@ -647,7 +699,7 @@ setup_224_adjsel
 	sta hdma_math_selection
 	stz vidmode
 	lda #$01
-	sta menu_dirty
+	sta filesel_dirty
 	lda #^space64
 	ldx #!space64
 	sta print_bank
@@ -667,33 +719,7 @@ setup_224_adjsel
 	plp
 	rts
 
-setup_448:
-	php
-	rep #$30 : .xl : .al
-	lda #36
-	sta listdisp
-	lda #36*64
-	sta textdmasize
-	lda #$ffc6
-	sta hdma_scroll+8
-	sep #$20 : .as
-	lda #$c6
-	sta $2110
-	lda #$ff
-	sta $2110
-	lda #$01
-	sta barstep
-	ora #$08
-	sta $2133
-	lda #$04
-	sta hdma_math_selection
-	lda #$01
-	sta vidmode
-	sta menu_dirty
-	plp
-	rts
-
-menu_statusbar
+filesel_statusbar
 	pha
 	phx
 	php
@@ -723,3 +749,142 @@ menu_statusbar
 	pla
 	rts
 
+select_last_file:
+	php
+	sep #$20 : .as
+	rep #$10 : .xl
+	lda @LAST_STATUS
+	bne +
+	plp
+	rts
++	jsr backup_screen
+	lda #^text_last
+	sta window_tbank
+	ldx #!text_last
+	stx window_taddr
+	lda @last_win_x
+	sta window_x
+	inc
+	inc
+	sta bar_xl
+	pha
+	lda @last_win_y
+	sta window_y
+	inc
+	sta bar_yl
+	inc
+	pha
+	lda @last_win_w
+	sta window_w
+	lda @last_win_h
+	sta window_h
+	jsr draw_window
+	stz print_pal
+	lda #^LAST_GAME
+	ldx #!LAST_GAME
+	sta print_bank
+	stx print_src
+	stz print_pal
+	pla
+	sta print_y
+	pla
+	sta print_x
+	lda #56
+	sta bar_wl
+	sta print_count
+	jsr hiprint
+-	lda isr_done
+	lsr
+	bcc -
+	jsr printtime
+	jsr read_pad
+	lda #$80
+	and pad1trig+1
+	bne +
+	lda #$10
+	and pad1trig+1
+	beq -
+	lda #$04
+	sta @MCU_CMD
+	jmp select_file_fade
++	jsr restore_screen
+	plp
+	rts
+
+scroll_direntry_clean:
+	lda #$01
+	sta direntry_xscroll_state
+	stz direntry_xscroll
+	stz direntry_xscroll_wait
+	jsr scroll_direntry
+	stz direntry_xscroll_state
+	stz direntry_xscroll
+	rts
+
+scroll_direntry:
+	ldy filesel_sel
+	lda direntry_xscroll_state
+	bne +
+	lda direntry_fits, y
+	bne scroll_direntry_enter
+;	stz direntry_xscroll_state
+	rts
+scroll_direntry_enter
+	lda #$01
+	sta direntry_xscroll_state
+	stz direntry_xscroll_wait
++	lda direntry_xscroll_wait
+	beq +
+	dec direntry_xscroll_wait
+	rts
+
++	lda direntry_xscroll
+	bne scroll_direntry_scrollfast
+	lda #$28
+	bra +
+scroll_direntry_scrollfast
+	lda #$10
++	sta direntry_xscroll_wait
+	tya
+	clc
+	adc #$09
+	sta cursor_y
+	lda #$02
+	sta cursor_x
+	rep #$20 : .al
+	lda filesel_sel
+	asl
+	asl
+	tay
+	lda [dirptr_addr], y
+	sta @dirent_addr
+	iny
+	iny
+	sep #$20 : .as
+	lda [dirptr_addr], y	   ; load fileinfo bank
+	clc
+	adc #$c0                   ; add $C0 for memory map
+	sta @dirent_bank           ; store as current bank
+	iny
+	lda [dirptr_addr], y
+	iny
+	sta @dirent_type
+	ldy filesel_sel
+	sty direntry_fits_idx
+	phy
+	jsr print_direntry
+	ply
+	lda direntry_fits, y
+	bne +
+	lda #$ff
+	sta direntry_xscroll_state
+	lda #$28
+	sta direntry_xscroll_wait
++	lda direntry_xscroll_state
+	clc
+	adc direntry_xscroll
+	sta direntry_xscroll
+	bne +
+	lda #$01
+	sta direntry_xscroll_state
++	rts

snes/logospr.a65

@@ -1,80 +1,69 @@
-logospr .byt  $00, $00, $00, $00, $00, $00, $00, $00
+logospr .byt  $50, $2f, $75, $2a, $7e, $21, $4a, $14
+        .byt  $6f, $3e, $5b, $1b, $60, $20, $54, $00
+        .byt  $10, $0f, $15, $0a, $1f, $00, $3e, $01
+        .byt  $1e, $01, $3a, $05, $01, $1e, $21, $1f
+        .byt  $f4, $8f, $fc, $83, $7f, $84, $fe, $05
+        .byt  $fe, $07, $fb, $07, $fe, $02, $fe, $00
+        .byt  $0c, $8b, $08, $0f, $03, $04, $83, $80
+        .byt  $03, $00, $07, $04, $00, $01, $01, $01
+        .byt  $0f, $f8, $4f, $b8, $f7, $00, $b7, $58
+        .byt  $af, $e0, $ff, $f0, $0f, $10, $df, $e0
+        .byt  $08, $f8, $40, $b8, $f8, $08, $f8, $08
+        .byt  $e0, $10, $f0, $10, $00, $e0, $c0, $c0
+        .byt  $ff, $00, $fb, $00, $f9, $00, $f8, $00
+        .byt  $f8, $00, $f0, $00, $f0, $00, $f0, $00
+        .byt  $00, $01, $03, $03, $00, $00, $00, $00
+        .byt  $00, $00, $00, $00, $00, $00, $00, $00
+        .byt  $00, $ff, $00, $7f, $fe, $61, $eb, $0a
+        .byt  $7f, $00, $1f, $00, $00, $00, $00, $00
+        .byt  $00, $ff, $00, $ff, $3f, $40, $35, $39
+        .byt  $00, $00, $00, $00, $00, $00, $00, $00
+        .byt  $0f, $e0, $1f, $c0, $bf, $c0, $ff, $00
+        .byt  $ff, $00, $fe, $00, $70, $00, $00, $00
+        .byt  $10, $e0, $60, $80, $c0, $c0, $00, $00
+        .byt  $00, $00, $00, $00, $00, $00, $00, $00
+        .byt  $f0, $00, $e0, $00, $e0, $00, $c0, $00
+        .byt  $00, $00, $00, $00, $00, $00, $00, $00
+        .byt  $00, $00, $00, $00, $00, $00, $00, $00
+        .byt  $00, $00, $00, $00, $00, $00, $00, $00
+        .byt  $7f, $2b, $5e, $1f, $7e, $3f, $6b, $2b
+        .byt  $4f, $0f, $da, $1a, $c0, $22, $c0, $35
+        .byt  $0a, $1e, $3e, $1e, $00, $1e, $14, $0a
+        .byt  $30, $20, $25, $25, $1d, $1d, $0a, $0a
+        .byt  $ff, $00, $ff, $00, $ff, $00, $ff, $00
+        .byt  $ff, $00, $ff, $00, $ff, $00, $ff, $00
+        .byt  $00, $00, $00, $00, $00, $00, $00, $00
+        .byt  $00, $00, $00, $00, $00, $00, $00, $00
+        .byt  $ff, $00, $ff, $00, $83, $00, $00, $00
+        .byt  $80, $00, $80, $00, $80, $00, $80, $00
+        .byt  $00, $00, $00, $00, $00, $00, $00, $00
+        .byt  $00, $00, $00, $00, $00, $00, $00, $00
+        .byt  $e0, $00, $e0, $00, $80, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $e0, $a0, $a1, $a0, $41, $80, $01, $c0
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $de, $3f, $9e, $7f, $bf, $7f, $bf, $7f
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $ff, $ff, $fe, $ff, $01, $fe, $00, $fe
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $ff, $00, $ff, $00, $ff, $00, $fe, $01
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $00, $00, $80, $80, $00, $80, $80, $80
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $ff, $7f, $7f, $7f, $7f, $7f, $7f, $ff
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $2f, $07, $13, $07, $11, $02, $48, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $df, $d8, $cb, $cc, $cd, $ce, $87, $86
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $ff, $ff, $ff, $ff, $00, $ff, $c5, $3b
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $ff, $00, $ff, $00, $ff, $00, $7f, $83
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $c0, $e0, $a0, $e0, $00, $00, $80, $80
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $ff, $0f, $ff, $3f, $7f, $bf, $7f, $ff
+        .byt  $c0, $3f, $d5, $2a, $ff, $00, $7f, $00
+        .byt  $7f, $00, $7f, $00, $3f, $00, $0f, $00
+        .byt  $3f, $3f, $3f, $3f, $3f, $3f, $1e, $1e
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $04, $00, $08, $00, $10, $00, $10, $00
+        .byt  $ff, $00, $ff, $00, $ff, $00, $ff, $00
+        .byt  $ff, $00, $ff, $00, $fe, $00, $fc, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $f8, $f8, $f0, $f0, $e0, $e0, $e0, $e0
-        .byt  $7f, $20, $7f, $20, $60, $00, $00, $20
-        .byt  $00, $3f, $c0, $3f, $ff, $40, $ff, $00
-        .byt  $3f, $20, $3f, $20, $20, $3f, $40, $7f
-        .byt  $5f, $7f, $1f, $3f, $20, $7f, $20, $3f
-        .byt  $c1, $01, $80, $00, $01, $01, $40, $40
-        .byt  $00, $c0, $40, $c0, $c0, $40, $c0, $40
-        .byt  $ff, $7f, $ff, $3e, $7e, $be, $3f, $bf
-        .byt  $bf, $bf, $bf, $ff, $3f, $ff, $3f, $ff
-        .byt  $ff, $00, $ff, $00, $01, $01, $01, $81
-        .byt  $80, $fc, $5c, $4c, $00, $00, $18, $00
-        .byt  $fe, $01, $ff, $01, $01, $ff, $00, $fe
-        .byt  $3f, $fd, $bb, $db, $ff, $ff, $e7, $e7
-        .byt  $00, $00, $00, $00, $00, $00, $c0, $c0
-        .byt  $80, $80, $00, $00, $01, $00, $03, $00
-        .byt  $ff, $ff, $ff, $ff, $ff, $ff, $3f, $ff
-        .byt  $7f, $ff, $ff, $ff, $fe, $fe, $fc, $fc
-        .byt  $46, $00, $41, $00, $40, $00, $40, $00
-        .byt  $40, $00, $80, $00, $80, $00, $00, $00
-        .byt  $81, $81, $80, $80, $80, $80, $80, $80
-        .byt  $80, $80, $00, $00, $00, $00, $00, $00
-        .byt  $44, $44, $00, $00, $78, $00, $03, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $bb, $83, $ff, $ff, $07, $07, $00, $00
-        .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $00, $00, $00, $00, $03, $00, $fc, $00
-        .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $ff, $ff, $ff, $ff, $fc, $fc, $00, $00
-        .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $60, $00, $c0, $00, $00, $00, $00, $00
-        .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $80, $80, $00, $00, $00, $00, $00, $00
-        .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $e0, $5f, $a0, $5f, $bf, $40, $bf, $60
-        .byt  $bf, $7f, $bf, $7f, $80, $40, $00, $40
-        .byt  $20, $7f, $20, $3f, $3f, $3f, $3f, $3f
-        .byt  $3f, $3f, $3f, $3f, $3f, $00, $bf, $80
-        .byt  $00, $80, $10, $c0, $c0, $40, $e0, $40
-        .byt  $c0, $c0, $e0, $e0, $60, $60, $00, $40
-        .byt  $7f, $ff, $2f, $af, $bf, $bf, $9f, $9f
-        .byt  $bf, $bf, $9f, $bf, $9f, $3f, $bf, $3f
-        .byt  $13, $00, $10, $00, $10, $00, $08, $00
-        .byt  $08, $00, $08, $00, $08, $00, $00, $00
-        .byt  $e0, $e0, $e0, $e0, $e0, $e0, $f0, $f0
-        .byt  $f0, $f0, $f0, $f0, $f0, $f0, $f8, $f8
-        .byt  $fc, $00, $00, $00, $00, $00, $00, $00
+        .byt  $80, $00, $80, $00, $80, $00, $80, $00
+        .byt  $80, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
@@ -93,36 +82,67 @@ logospr .byt  $00, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $3f, $7f, $3f, $7f, $c0, $7f, $80, $3f
-        .byt  $3f, $3f, $1f, $1f, $00, $00, $00, $00
-        .byt  $80, $80, $80, $80, $00, $40, $40, $40
-        .byt  $40, $7f, $60, $7f, $3f, $3f, $1f, $1f
-        .byt  $80, $c0, $80, $c0, $00, $c0, $40, $c0
-        .byt  $80, $80, $00, $00, $00, $00, $00, $00
-        .byt  $3f, $3f, $3f, $3f, $3f, $3f, $3f, $7f
-        .byt  $7f, $ff, $ff, $ff, $ff, $ff, $ff, $ff
-        .byt  $08, $00, $08, $00, $08, $00, $00, $00
-        .byt  $00, $00, $00, $00, $20, $00, $40, $00
-        .byt  $f0, $f0, $f0, $f0, $f0, $f0, $f0, $f0
-        .byt  $f0, $f0, $e0, $e0, $c0, $c0, $80, $80
+        .byt  $00, $20, $c0, $00, $80, $40, $c0, $40
+        .byt  $00, $80, $40, $c0, $c0, $c0, $40, $00
+        .byt  $00, $20, $40, $00, $40, $00, $40, $00
+        .byt  $00, $40, $40, $00, $40, $00, $00, $40
+        .byt  $7b, $06, $3a, $47, $3e, $43, $4c, $41
+        .byt  $0f, $00, $1f, $10, $0f, $10, $1f, $10
+        .byt  $06, $01, $06, $01, $02, $01, $30, $03
+        .byt  $08, $02, $05, $00, $0b, $00, $05, $00
+        .byt  $fc, $02, $d8, $7c, $80, $00, $80, $00
+        .byt  $80, $40, $c0, $40, $80, $80, $00, $00
+        .byt  $00, $00, $00, $40, $40, $00, $40, $40
+        .byt  $80, $00, $00, $00, $00, $80, $80, $00
+        .byt  $07, $19, $0e, $10, $14, $1a, $18, $16
+        .byt  $10, $0e, $02, $1c, $00, $1e, $10, $1e
+        .byt  $0e, $08, $0e, $00, $0e, $0a, $0e, $06
+        .byt  $1e, $1e, $0e, $0c, $0e, $0e, $0e, $0e
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
+        .byt  $0b, $1f, $15, $1e, $1e, $1e, $06, $1e
+        .byt  $0f, $1f, $1f, $0f, $0f, $0f, $0f, $0f
+        .byt  $04, $0e, $0b, $0f, $01, $0f, $09, $0e
+        .byt  $09, $0f, $14, $1f, $0a, $0f, $05, $0f
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
+        .byt  $0f, $1f, $0f, $0f, $05, $05, $0a, $0a
+        .byt  $00, $00, $00, $00, $00, $00, $00, $00
+        .byt  $0f, $0f, $1f, $1f, $1f, $05, $1f, $0a
+        .byt  $1f, $08, $1f, $00, $1f, $0a, $1f, $15
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
+        .byt  $00, $00, $00, $00, $00, $02, $00, $10
+        .byt  $00, $0e, $00, $15, $10, $0f, $10, $0f
+        .byt  $1f, $1f, $1f, $1f, $1d, $1d, $0f, $0f
+        .byt  $11, $11, $0a, $0a, $10, $10, $10, $10
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
+        .byt  $0a, $05, $05, $0a, $0f, $00, $0f, $00
+        .byt  $0f, $0a, $07, $05, $00, $00, $00, $00
+        .byt  $0a, $0a, $05, $05, $0f, $0f, $0f, $0f
+        .byt  $05, $05, $02, $02, $00, $00, $00, $00
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $5f, $2f, $5f, $2f, $70, $2f, $40, $1f
         .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $1f, $00, $1f, $00, $1f, $00, $3f, $00
+        .byt  $00, $00, $00, $00, $00, $00, $00, $00
+        .byt  $00, $00, $00, $00, $00, $00, $00, $00
+        .byt  $09, $00, $01, $08, $0f, $08, $05, $00
+        .byt  $03, $05, $07, $05, $00, $02, $06, $00
+        .byt  $07, $00, $07, $00, $05, $02, $03, $00
+        .byt  $04, $03, $05, $02, $00, $06, $00, $02
+        .byt  $00, $06, $02, $04, $06, $04, $00, $02
+        .byt  $02, $00, $00, $02, $02, $00, $02, $00
+        .byt  $00, $02, $00, $02, $02, $06, $04, $06
+        .byt  $06, $06, $04, $06, $06, $06, $06, $06
+        .byt  $02, $04, $00, $06, $02, $04, $00, $06
+        .byt  $06, $06, $04, $06, $00, $04, $00, $00
+        .byt  $06, $06, $06, $06, $06, $06, $06, $06
+        .byt  $06, $06, $06, $04, $04, $02, $00, $06

snes/main.a65

@@ -4,78 +4,179 @@
 GAME_MAIN:
 	sep #$20 : .as
 	lda #$00
-	sta @AVR_CMD
+	sta @MCU_CMD		; clear MCU command register
 	rep #$20 : .al
 	lda #$0000
-	sta @AVR_PARAM
-	sta @AVR_PARAM+2
+	sta @MCU_PARAM		; clear MCU command parameters
+	sta @MCU_PARAM+2
 	sep #$20 : .as
 	stz $4200 ; inhibit VBlank NMI
-	jsr killdma
+	rep #$20 : .al
+	lda @warm_signature	; Was CMD_RESET issued before reset?
+	cmp #$fa50		; If yes, then perform warm boot procedure
+	bne coldboot
+	lda #$0000
+	sta @warm_signature
+	lda @saved_sp		; Restore previous stack pointer
+	tcs
+	sep #$20 : .as
+
+;	jsr killdma		; The following initialization processes must not touch memory
+	jsr waitblank		; structures used by the file selector !
+	jsr snes_init
+	cli
+	lda #$01
+	sta $420d 		; fast cpu
+	jsr setup_gfx
+	jsr colortest
+	jsr video_init
+	jsr setup_hdma
+	lda #$0f
+	sta cur_bright
+	sta tgt_bright
+	sta $2100
+
+	jmp @set_bank		; Set bios bank, just to be sure
+set_bank:
+	plp			; Restore processor state
+	rts			; Jump to the routine which called the sub-routine issuing CMD_RESET
+
+coldboot:							; Regular, cold-start init
+	sep #$20 : .as
+;	jsr killdma
 	jsr waitblank
 	jsr snes_init
 	lda #$01
 	sta $420d ; fast cpu
 	jsr setup_gfx
 	jsr colortest
+	jsr filesel_init
+	jsr video_init
 	jsr setup_hdma
-	jsr menu_init
-	jsr tests
+	jsr screen_on
+
 	sep #$20 : .as
 	lda @RTC_STATUS
 	beq +
 	jsl time_init
 +
-	jsr menuloop
+	jsr fileselloop
 	cli
 	stz $4200
 	jmp @infloop	;infinite loop in WRAM
 
 killdma:
-	stz $420b
-	stz $420c
+	stz $4300
+	stz $4301
+	stz $4302
+	stz $4303
+	stz $4304
+	stz $4305
+	stz $4306
+	stz $4307
+	stz $4308
+	stz $4309
+	stz $430a
+	stz $430b
 	stz $4310
 	stz $4311
 	stz $4312
 	stz $4313
 	stz $4314
+	stz $4315
+	stz $4316
+	stz $4317
+	stz $4318
+	stz $4319
+	stz $431a
+	stz $431b
 	stz $4320
 	stz $4321
 	stz $4322
 	stz $4323
 	stz $4324
+	stz $4325
+	stz $4326
+	stz $4327
+	stz $4328
+	stz $4329
+	stz $432a
+	stz $432b
 	stz $4330
 	stz $4331
 	stz $4332
 	stz $4333
 	stz $4334
+	stz $4335
+	stz $4336
+	stz $4337
+	stz $4338
+	stz $4339
+	stz $433a
+	stz $433b
 	stz $4340
 	stz $4341
 	stz $4342
 	stz $4343
 	stz $4344
+	stz $4345
+	stz $4346
+	stz $4347
+	stz $4348
+	stz $4349
+	stz $434a
+	stz $434b
 	stz $4350
 	stz $4351
 	stz $4352
 	stz $4353
 	stz $4354
+	stz $4355
+	stz $4356
+	stz $4357
+	stz $4358
+	stz $4359
+	stz $435a
+	stz $435b
 	stz $4360
 	stz $4361
 	stz $4362
 	stz $4363
 	stz $4364
+	stz $4365
+	stz $4366
+	stz $4367
+	stz $4368
+	stz $4369
+	stz $436a
+	stz $436b
+	stz $4370
+	stz $4371
+	stz $4372
+	stz $4373
+	stz $4374
+	stz $4375
+	stz $4376
+	stz $4377
+	stz $4378
+	stz $4379
+	stz $437a
+	stz $437b
+
+	stz $420b
+	stz $420c
 	rts
 
-
-
-
 waitblank:
+	php
+	sep #$30 : .as : .xs
 -	lda $4212
 	and #$80
 	bne -
 -	lda $4212
 	and #$80
 	beq -
+	plp
 	rts
 
 colortest:
@@ -91,21 +192,14 @@ setup_gfx:
 	stz $420b
 	stz $420c
 ;clear tilemap buffers
-	ldx #$0000
+	ldx #$8000
 	stx $2181
-	lda #$01
+	lda #$00
 	sta $2183
-	DMA0(#$08, #0, #^zero, #!zero, #$80)
+	DMA0(#$08, #$8000, #^zero, #!zero, #$80)
 
-;copy 2bpp font (can be used as 4-bit lores font!)
-	ldx #$4000
-	stx $2116
-	DMA0(#$01, #$2000, #^font2, #!font2, #$18)
-
-;copy 4bpp font
-	ldx #$0000
-	stx $2116
-	DMA0(#$01, #$4000, #^font4, #!font4, #$18)
+;generate fonts
+	jsr genfonts
 
 ;clear BG1 tilemap
 	ldx #BG1_TILE_BASE
@@ -120,34 +214,40 @@ setup_gfx:
 ;clear OAM tables
 	ldx #$0000
 	stx $2102
-	DMA0(#$08, #$544, #^zero, #!zero, #$04)
+	DMA0(#$08, #$220, #^zero, #!zero, #$04)
 
 ;copy logo tiles
 	ldx #$2000
 	stx $2116
 	DMA0(#$01, #$4000, #^logo, #!logo, #$18)
 
-;copy logo tilemap
+;generate logo tilemap
 	ldx #BG1_TILE_BASE
 	stx $2116
-	DMA0(#$01, #$280, #^logomap, #!logomap, #$18)
+	ldx #$0100
+-	stx $2118
+	inx
+	cpx #$01e0
+	bne -
+
 
 ;copy sprites tiles
 	ldx #OAM_TILE_BASE
 	stx $2116
-	DMA0(#$01, #$400, #^logospr, #!logospr, #$18)
+	DMA0(#$01, #$500, #^logospr, #!logospr, #$18)
 
 ;set OAM tables
 	ldx #$0000
 	stx $2102
-	DMA0(#$00, #$5C, #^oam_data_l, #!oam_data_l, #$04)
+	DMA0(#$00, #$60, #^oam_data_l, #!oam_data_l, #$04)
 	ldx #$0100
 	stx $2102
-	DMA0(#$00, #$08, #^oam_data_h, #!oam_data_h, #$04)
+	DMA0(#$00, #$09, #^oam_data_h, #!oam_data_h, #$04)
 
 ;set palette
 	stz $2121
 	DMA0(#$00, #$200, #^palette, #!palette, #$22)
+	stz $2121
 
 ;copy hdma tables so we can work "without" the cartridge
 ;palette
@@ -197,10 +297,10 @@ setup_gfx:
 	DMA0(#$00, #$6C, #^fadeloop, #!fadeloop, #$80);
 	rts
 
-tests:
+video_init:
 	sep #$20 : .as		;8-bit accumulator
 	rep #$10 : .xl		;16-bit index
-	lda #$03		;mode 3, mode 5 via HDMA :D
+	lda #$03		;mode 3, mode 5 via HDMA
 	sta $2105
 	lda #$58		;Tilemap addr 0xB000
 	ora #$02		;SC size 32x64
@@ -226,13 +326,19 @@ tests:
 	lda #$1f
 	sta $212e
 	sta $212f
-	stz $2121
-	lda #$0f
-	sta $2100		;screen on, full brightness
-	lda #9
+;	stz $2121
+	lda #8
 	sta bar_yl
+	stz cur_bright
+	stz tgt_bright
 	rts
-	
+
+screen_on:
+	stz $2100		;screen on, 0% brightness
+	lda #$0f
+	sta tgt_bright
+	rts
+
 snes_init:
 	sep #$20 : .as		;8-bit accumulator
 	rep #$10 : .xl		;16-bit index
@@ -250,6 +356,7 @@ snes_init:
 	stz $420a		;
 	stz $420b		;
 	stz $420c		;
+	stz $420d		;
 	lda #$8f
 	sta $2100		;INIDISP: force blank
 	lda #$03		; 8x8+16x16; name=0; base=3
@@ -283,7 +390,7 @@ snes_init:
 	stz $2113		;
 	stz $2114		;
 	stz $2114		;
-	lda #$80		
+	lda #$80
 	sta $2115		;
 	stz $2116		;
 	stz $2117		;
@@ -341,7 +448,7 @@ snes_init:
 
 fadeloop:
 	sep #$30 : .as : .xs
-	ldx #$0f
+	ldx cur_bright
 	and #$00
 	pha
 	plb
@@ -387,3 +494,59 @@ fadeloop_start
 
 fadeloop_end:
 	.byt $ff
+
+genfonts:
+	php
+	rep #$10 : .xl
+	sep #$20 : .as
+
+;clear VRAM font areas
+	ldx #$0000
+	stx $2116
+	DMA0(#$09, #$4000, #^zero, #!zero, #$18)
+
+	ldx #$4000
+	stx $2116
+	DMA0(#$09, #$2000, #^zero, #!zero, #$18)
+
+	sep #$10 : .xs
+	rep #$20 : .al
+
+	stz $2116
+	ldx #$01
+	stx $4300
+	ldx #^font
+	stx $4304
+	lda #!font
+	sta $4302
+	lda #$0010
+	sta $4305
+	ldx #$18
+	stx $4301
+	lda #$0000
+-	sta $2116
+	ldx #$10
+	stx $4305
+	ldx #$01
+	stx $420b
+	clc
+	adc #$20
+	cmp #$2000
+	bne -
+	ldx #^font
+	stx $4304
+	lda #!font
+	sta $4302
+	lda #$4000
+-	sta $2116
+	ldx #$10
+	stx $4305
+	ldx #$01
+	stx $420b
+	clc
+	adc #$10
+	cmp #$5000
+	bne -
+	plp
+	rts
+

snes/mainmenu.a65

@@ -80,15 +80,12 @@ mm_entloop
 	plb
 	phx
 	jsr hiprint
-	plx
-	inx
-	inx
-	inx
-	inx
-	inx
-	inx
-	inx
-	inx
+	rep #$20 : .al
+	pla
+	clc
+	adc #$08
+	tax
+	sep #$20 : .as
 	inc mm_tmp
 	lda mm_tmp
 	cmp @main_entries

snes/memmap.i65

@@ -6,22 +6,35 @@
 /* These must be defined as constants, because they're used
  * in calculation that is sent to PPU as parameters */
 
+#define APUIO0		$2140
+#define APUIO1		$2141
+#define APUIO2		$2142
+#define APUIO3		$2143
+
 #define BG1_TILE_BASE	$5800
 #define BG2_TILE_BASE	$5000
 
 #define OAM_TILE_BASE	$6000
 
-#define BG1_TILE_BUF	$7FB000
-#define BG2_TILE_BUF	$7FA000
+#define BG1_TILE_BUF	$7EB000
+#define BG2_TILE_BUF	$7EA000
 
-#define BG1_TILE_BAK	$7F9000
-#define BG2_TILE_BAK	$7F8000
+#define BG1_TILE_BAK	$7E9000
+#define BG2_TILE_BAK	$7E8000
 
-#define AVR_CMD		$307000
-#define AVR_PARAM	$307004
+#define MCU_CMD		$307000
+#define MCU_PARAM	$307004
 #define RTC_STATUS	$307100
-#define SYSINFO_BLK	$307110
+#define LAST_STATUS	$307101
+#define SYSINFO_BLK	$307200
+#define LAST_GAME	$307420
 
 #define ROOT_DIR	$C10000
 
 #define CMD_SYSINFO	$03
+#define CMD_LOADSPC	$05
+#define CMD_RESET	$06
+
+#define SPC_DATA	$FD0000
+#define SPC_HEADER	$FE0000
+#define SPC_DSP_REGS	$FE0100

snes/pad.a65

@@ -4,7 +4,15 @@ read_pad:
 read_pad1
 	ldx pad1mem 	;byetUDLRaxlriiii
 	lda $4218
-	ora $421a
+	and #$000f
+	bne +
+	lda $4218
++	sta pad1mem
+	lda $421a
+	and #$000f
+	bne +
+	lda $421a
++	ora pad1mem
 	sta pad1mem
 	and #$0f00
 	bne read_pad1_count

snes/palette.a65

@@ -1,77 +1,64 @@
-palette
-;8bit palette; 4bit palette0; 2bit palette0
-        .byt  $42, $08, $ff, $7f, $c6, $18, $18, $63
-;2bit palette1
-        .byt  $42, $08, $ff, $43, $c6, $0c, $18, $63
-;2bit palette2
-        .byt  $42, $08, $f0, $43, $c0, $0c, $18, $63
-;2bit palette3
+palette .byt  $1f, $7c, $ff, $7f, $c6, $18, $18, $63
+        .byt  $00, $00, $ff, $43, $c6, $0c, $18, $33
+        .byt  $00, $00, $f0, $43, $c3, $0c, $0c, $33
+        .byt  $1f, $7c, $1f, $7c, $1f, $7c, $1f, $7c
+        .byt  $00, $00, $ff, $43, $c6, $0c, $18, $33
+        .byt  $1f, $7c, $1f, $7c, $1f, $7c, $1f, $7c
+        .byt  $1f, $7c, $1f, $7c, $1f, $7c, $1f, $7c
+        .byt  $1f, $7c, $1f, $7c, $1f, $7c, $1f, $7c
+        .byt  $00, $00, $f0, $43, $c3, $0c, $0c, $33
+        .byt  $40, $08, $60, $0c, $80, $10, $80, $0c
+        .byt  $80, $14, $a0, $14, $05, $21, $30, $42
+        .byt  $0f, $3e, $cd, $3d, $c1, $18, $52, $4a
+        .byt  $1f, $7c, $1f, $7c, $1f, $7c, $1f, $7c
+        .byt  $d6, $5a, $6b, $2d, $39, $67, $7a, $6b
+        .byt  $ce, $39, $46, $29, $94, $52, $ad, $35
+        .byt  $a2, $14, $aa, $35, $c0, $18, $18, $63
+        .byt  $1f, $7c, $1f, $7c, $1f, $7c, $1f, $7c
+        .byt  $e0, $1c, $a0, $18, $c3, $18, $29, $25
+        .byt  $4a, $29, $ff, $7f, $21, $04, $bd, $73
+        .byt  $fe, $7b, $e7, $18, $42, $08, $00, $00
+        .byt  $1f, $7c, $1f, $7c, $1f, $7c, $1f, $7c
+        .byt  $a5, $14, $79, $7b, $e6, $1c, $63, $0c
+        .byt  $de, $7f, $bd, $7f, $08, $21, $8c, $31
+        .byt  $6a, $2d, $08, $25, $61, $29, $00, $21
+        .byt  $1f, $7c, $1f, $7c, $1f, $7c, $1f, $7c
+        .byt  $c4, $45, $45, $5a, $a5, $6e, $e6, $7e
+        .byt  $c7, $10, $b4, $66, $82, $35, $27, $35
+        .byt  $8b, $3d, $66, $59, $85, $69, $6f, $76
+        .byt  $1f, $7c, $1f, $7c, $1f, $7c, $1f, $7c
+        .byt  $83, $75, $37, $7f, $46, $45, $0a, $7a
+        .byt  $9b, $7f, $d2, $7a, $15, $7f, $c0, $3c
+        .byt  $08, $11, $21, $25, $86, $52, $0e, $25
+        .byt  $d9, $1c, $f1, $1c, $9e, $14, $ef, $1c
+        .byt  $ca, $18, $9d, $14, $36, $29, $d3, $72
+        .byt  $50, $5a, $81, $28, $cd, $49, $6a, $26
+        .byt  $c7, $15, $63, $25, $4f, $23, $ac, $1e
+        .byt  $05, $0d, $0e, $2b, $25, $0d, $c4, $08
+        .byt  $62, $04, $e7, $29, $b2, $18, $6c, $0c
+        .byt  $82, $04, $ce, $19, $31, $1a, $ff, $17
+        .byt  $dd, $1b, $7b, $1f, $4a, $11, $d6, $1a
+        .byt  $29, $73, $4d, $63, $50, $4f, $d3, $26
+        .byt  $b8, $37, $26, $08, $fe, $20, $94, $3f
+        .byt  $a3, $04, $10, $42, $10, $42, $10, $42
         .byt  $10, $42, $10, $42, $10, $42, $10, $42
-;4bit palette1; 2bit palette4
-        .byt  $42, $08, $ff, $43, $c6, $0c, $18, $63
-;2bit palette5
+        .byt  $1f, $7c, $1f, $7c, $1f, $7c, $1f, $7c
+        .byt  $1f, $7c, $1f, $7c, $1f, $7c, $1f, $7c
+        .byt  $1f, $7c, $1f, $7c, $1f, $7c, $1f, $7c
+        .byt  $1f, $7c, $1f, $7c, $1f, $7c, $1f, $7c
+        .byt  $1f, $74, $00, $00, $08, $21, $8c, $31
+        .byt  $ce, $39, $bd, $77, $7b, $6f, $39, $67
+        .byt  $d6, $5a, $94, $52, $ff, $7f, $10, $42
+        .byt  $4a, $29, $84, $10, $c6, $18, $52, $4a
+        .byt  $1f, $74, $45, $11, $e3, $10, $a1, $0c
+        .byt  $e8, $19, $4f, $27, $0e, $23, $ed, $22
+        .byt  $2e, $23, $09, $1a, $cc, $22, $24, $11
         .byt  $10, $42, $10, $42, $10, $42, $10, $42
-;2bit palette6
-        .byt  $10, $42, $10, $42, $10, $42, $10, $42
-;2bit palette7
-        .byt  $10, $42, $10, $42, $10, $42, $10, $42
-;4bit palette2
-        .byt  $10, $42, $f0, $43, $c0, $0c, $18, $63
-;logo
-        .byt  $00, $00, $00, $00, $20, $04, $20, $00
-        .byt  $20, $00, $21, $00, $21, $08, $40, $08
-        .byt  $40, $04, $42, $04, $42, $0c, $60, $0c
-        .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $62, $0c, $61, $0c, $62, $00, $63, $0c
-        .byt  $63, $10, $62, $08, $80, $10, $64, $0c
-        .byt  $a0, $14, $84, $10, $a2, $0c, $a4, $0c
-        .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $a4, $10, $c0, $18, $a4, $14, $a6, $14
-        .byt  $a5, $14, $89, $14, $e0, $1c, $c5, $10
-        .byt  $c6, $18, $e3, $0c, $e5, $1c, $00, $21
-        .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $04, $0d, $ca, $18, $04, $11, $e7, $1c
-        .byt  $20, $25, $21, $1d, $5d, $0c, $08, $15
-        .byt  $40, $29, $08, $21, $5e, $10, $5d, $10
-        .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $cf, $20, $7b, $10, $7e, $14, $27, $25
-        .byt  $60, $31, $28, $25, $44, $29, $61, $29
-        .byt  $46, $29, $29, $25, $62, $2d, $f3, $1c
-        .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $66, $15, $d6, $18, $63, $31, $d8, $18
-        .byt  $0e, $25, $80, $35, $48, $29, $bb, $18
-        .byt  $4a, $29, $66, $2d, $4b, $29, $a3, $2d
-        .byt  $a0, $39, $f6, $20, $6a, $15, $6a, $19
-        .byt  $32, $21, $a1, $39, $a1, $41, $31, $29
-        .byt  $4e, $31, $a2, $39, $c0, $3d, $6b, $2d
-        .byt  $8a, $31, $6d, $2d, $c8, $19, $00, $42
-        .byt  $8c, $31, $e3, $3d, $ac, $19, $e3, $45
-        .byt  $ad, $15, $e3, $49, $02, $42, $e6, $2d
-        .byt  $20, $42, $ad, $35, $24, $46, $24, $4e
-        .byt  $28, $2e, $42, $46, $ee, $39, $45, $4a
-        .byt  $2a, $16, $48, $2e, $0f, $1e, $46, $56
-        .byt  $64, $4a, $44, $5e, $0f, $3e, $64, $4e
-        .byt  $65, $5a, $83, $4e, $67, $4e, $30, $42
-        .byt  $86, $4e, $32, $46, $6d, $2e, $52, $1a
-        .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $00, $00, $00, $00, $00, $00, $00, $00
-        .byt  $8b, $22, $a5, $56, $51, $46, $ab, $1a
-        .byt  $a5, $6a, $a5, $6e, $c1, $76, $c7, $5a
-        .byt  $93, $16, $e0, $7a, $72, $4a, $cc, $26
-        .byt  $b0, $2a, $93, $4e, $e5, $7e, $e8, $5e
-        .byt  $b5, $1e, $ed, $1e, $e6, $7e, $b5, $16
-        .byt  $95, $52, $b3, $56, $b5, $56, $0a, $63
-        .byt  $2d, $1b, $29, $67, $2f, $23, $f4, $2a
-        .byt  $d6, $5a, $17, $1b, $4a, $6b, $4d, $67
-        .byt  $f7, $5e, $f8, $62, $39, $1f, $18, $63
-        .byt  $6c, $73, $78, $23, $39, $67, $7b, $1b
-        .byt  $5a, $6b, $7b, $6f, $de, $17, $9c, $73
-        .byt  $bd, $77, $ff, $13, $de, $7b, $ff, $7f
-;sprite palette 7
-        .byt  $3f, $7c, $20, $08, $84, $0c, $a5, $14
-        .byt  $08, $21, $5a, $6b, $bc, $73, $fe, $7b
-        .byt  $f7, $5e, $73, $4e, $10, $42, $42, $08
-        .byt  $00, $00, $ad, $35, $b5, $56, $6b, $2d
-
+        .byt  $1f, $74, $df, $17, $47, $15, $c3, $0c
+        .byt  $0e, $12, $7b, $13, $b9, $33, $06, $7f
+        .byt  $2c, $63, $75, $3b, $72, $4f, $93, $16
+        .byt  $aa, $15, $24, $15, $17, $13, $50, $16
+        .byt  $1f, $74, $0e, $21, $54, $29, $a6, $14
+        .byt  $7e, $14, $5a, $2d, $10, $21, $0d, $25
+        .byt  $eb, $20, $9c, $14, $99, $14, $37, $29
+        .byt  $f6, $1c, $96, $14, $d3, $1c, $f1, $1c

snes/reset.a65

@@ -39,6 +39,8 @@ NMI_ROUTINE:
 	php
 	txa
 	dec
+	dec
+	dec
 	plp
 	bne small_bar
 	asl
@@ -82,9 +84,29 @@ math_cont
 	clc
 	adc bar_x	; + X start coord
 	sta $2127	; window 1 right
-	lda #$3e	; ch. 1-5
-	sta @$420c	; trigger HDMA
-	lda #$01
+;	lda #$3e	; ch. 1-5
+;	sta @$420c	; trigger HDMA
+
+	lda cur_bright
+	cmp tgt_bright
+	beq +
+	bpl bright_down
+bright_up
+	inc
+	sta cur_bright
+	lda $2100
+	and #$f0
+	ora cur_bright
+	sta $2100
+	bra +
+bright_down
+	dec
+	sta cur_bright
+	lda $2100
+	and #$f0
+	ora cur_bright
+	sta $2100
++	lda #$01
 	sta isr_done
         rtl
 

snes/spc700.a65

@@ -0,0 +1,61 @@
+; All SPC700 routines in SPC700 machine code
+; SPC loader & transfer routines by Shay Green <gblargg@gmail.com>
+
+loader				; .org $0002
+	.byt $F8,$21		;	mov x,@loader_data
+	.byt $BD		;	mov sp,x
+	.byt $CD,$22		;	mov x,#@loader_data+1
+
+	; Push PC and PSW from SPC header
+	.byt $BF		;	mov a,(x)+
+	.byt $2D		;	push a
+	.byt $BF		;	mov a,(x)+
+	.byt $2D		;	push a
+	.byt $BF		;	mov a,(x)+
+	.byt $2D		;	push a
+
+	; Set FLG to $60 rather than value from SPC
+	.byt $E8,$60		;	mov a,#$60
+	.byt $D4,$6C		;	mov FLG+x,a
+
+	; Restore DSP registers
+	.byt $8D,$00		;	mov y,#0
+	.byt $BF		; next:	mov a,(x)+
+	.byt $CB,$F2		;	mov $F2,y
+	.byt $C4,$F3		;	mov $F3,a
+	.byt $FC		;	inc y
+	.byt $10,-8		;	bpl next
+
+	.byt $8F,$6C,$F2	;	mov $F2,#FLG	; set for later
+
+	; Rerun loader
+	.byt $5F,$C0,$FF	;	jmp $FFC0
+
+;---------------------------------------
+
+transfer			; .org $0002
+
+	.byt $CD,$FE		; mov x,#$FE		; transfer 254 pages
+
+	; Transfer four-byte chunks
+	.byt $8D,$3F		; page: mov y,#$3F
+	.byt $E4,$F4		; quad: mov a,$F4
+	.byt $D6,$00,$02	; mov0: mov !$0200+y,a
+	.byt $E4,$F5		;	mov a,$F5
+	.byt $D6,$40,$02	; mov1: mov !$0240+y,a
+	.byt $E4,$F6		;	mov a,$F6
+	.byt $D6,$80,$02	; mov2: mov !$0280+y,a
+	.byt $E4,$F7		;	mov a,$F7	; tell S-CPU we're ready for more
+	.byt $CB,$F7		;	mov $F7,Y
+	.byt $D6,$C0,$02	; mov3: mov !$02C0+y,a
+	.byt $DC 		;	dec y
+	.byt $10,-25		;	bpl quad
+	; Increment MSBs of addresses
+	.byt $AB,$0A		;	inc mov0+2
+	.byt $AB,$0F		;	inc mov1+2
+	.byt $AB,$14		;	inc mov2+2
+	.byt $AB,$1B		;	inc mov3+2
+	.byt $1D    		;	dec x
+	.byt $D0,-38		;	bne page
+	; Rerun loader
+	.byt $5F,$C0,$FF	;	jmp $FFC0

snes/spcplay.a65

@@ -0,0 +1,676 @@
+#include "memmap.i65"
+
+; SPC Player
+; SPC700 transfer and IO routines by Shay Green <gblargg@gmail.com>
+
+spcplayer:
+	php
+	sep #$30 : .as : .xs
+
+	ldx #$0a	; Check if SPC header is present
+-
+	lda @SPC_HEADER,x
+	cmp @text_spcid,x
+	beq +
+	jmp spc_exit
++
+	dey
+	bne -
+
+	rep #$10 : .xl	; Now draw lots of stuff
+
+	stz bar_wl
+	dec bar_wl
+	stz bar_xl
+	dec bar_xl
+	stz bar_yl
+	dec bar_yl
+	jsr backup_screen
+
+	lda #^text_spcplay	; Loading window
+	sta window_tbank
+	ldx #!text_spcplay
+	stx window_taddr
+	lda @spcplay_win_x
+	sta window_x
+	lda @spcplay_win_y
+	sta window_y
+	lda @spcplay_win_w
+	sta window_w
+	lda @spcplay_win_h
+	sta window_h
+	jsr draw_window
+
+	lda #^text_spcload	; Loading text
+	ldx #!text_spcload
+	sta print_bank
+	stx print_src
+	stz print_pal
+	lda #29
+	sta print_count
+	lda #17
+	sta print_y
+	lda #17
+	sta print_x
+	jsr hiprint
+
+	stz isr_done
+-
+	lda isr_done		; Wait until text is being printed...
+	beq -
+
+	jsr spc700_load		; Load SPC into SPC700
+
+	lda #^text_spcplay
+	sta window_tbank
+	ldx #!text_spcplay
+	stx window_taddr
+	lda @spcstart_win_x
+	sta window_x
+	lda @spcstart_win_y
+	sta window_y
+	lda @spcstart_win_w
+	sta window_w
+	lda @spcstart_win_h
+	sta window_h
+	jsr draw_window
+
+	lda #^text_spcstarta
+	ldx #!text_spcstarta
+	sta print_bank
+	stx print_src
+	lda #$01
+	sta print_pal
+	lda #30
+	sta print_count
+	lda #15
+	sta print_y
+	lda #17
+	sta print_x
+	jsr hiprint
+
+	lda #^text_spcstartb
+	ldx #!text_spcstartb
+	sta print_bank
+	stx print_src
+	lda #$01
+	sta print_pal
+	lda #07
+	sta print_count
+	lda #17
+	sta print_y
+	lda #12
+	sta print_x
+	jsr hiprint
+
+	lda #$fe
+	ldx #$004e
+	sta print_bank
+	stx print_src
+	stz print_pal
+	lda #32
+	sta print_count
+	lda #17
+	sta print_y
+	lda #20
+	sta print_x
+	jsr hiprint
+
+	lda #^text_spcstartc
+	ldx #!text_spcstartc
+	sta print_bank
+	stx print_src
+	lda #$01
+	sta print_pal
+	lda #07
+	sta print_count
+	lda #18
+	sta print_y
+	lda #12
+	sta print_x
+	jsr hiprint
+
+	lda #$fe
+	ldx #$002e
+	sta print_bank
+	stx print_src
+	stz print_pal
+	lda #32
+	sta print_count
+	lda #18
+	sta print_y
+	lda #20
+	sta print_x
+	jsr hiprint
+
+	lda #^text_spcstartd
+	ldx #!text_spcstartd
+	sta print_bank
+	stx print_src
+	lda #$01
+	sta print_pal
+	lda #07
+	sta print_count
+	lda #19
+	sta print_y
+	lda #12
+	sta print_x
+	jsr hiprint
+
+	lda #$fe
+	ldx #$00b0
+        sta longptr+2
+	sta print_bank
+        stx longptr
+        ldy #$00
+        lda [longptr], y
+        cmp #$41
+        bpl +
+        inx
++	stx print_src
+	stz print_pal
+	lda #32
+	sta print_count
+	lda #19
+	sta print_y
+	lda #20
+	sta print_x
+	jsr hiprint
+
+spc_playloop:
+	lda isr_done	; SPC player loop
+	lsr
+	bcc spc_playloop
+	jsr printtime
+	stz isr_done
+
+	jsr read_pad
+	lda #$80
+	and pad1trig+1
+	bne spc_key_b
+	bra spc_playloop
+
+spc_key_b:
+	rep #$20 : .al
+	tsc
+	sta saved_sp	; Save SP for later re-entry
+	lda #$fa50	; Write reset signature
+	sta @warm_signature
+	sep #$20 : .as
+
+	sei		; Blank screen & issue CMD_RESET command to Microcontroller...
+	stz $2100	; ...this is required, because there is no other way to stop S-SMP & S-DSP
+	lda #CMD_RESET
+	sta @MCU_CMD
+-
+	bra -		; At this point, the SNES waits for an external reset from the Microcontroller
+
+spc_exit:		; Return from player in case of wrong SPC file data
+	plp
+	rts
+
+;---------------------------------------
+spc700_load:
+	php
+	sep #$20 : .as
+	rep #$10 : .xl
+
+	sei			; Disable NMI & IRQ
+	stz $4200		; The SPC player code is really timing sensitive ;)
+	jsr upload_dsp_regs	; Upload S-DSP registers
+	jsr upload_high_ram	; Upload 63.5K of SPC700 ram
+	jsr upload_low_ram	; Upload rest of ram
+	jsr restore_final	; Restore SPC700 state & start execution
+
+	lda #$81		; VBlank NMI + Auto Joypad Read
+	sta $4200		; enable V-BLANK NMI
+	cli
+	plp
+	rts
+;---------------------------------------
+; Uploads DSP registers and some other setup code
+upload_dsp_regs:
+
+; ---- Begin upload
+
+	ldy #$0002
+	jsr spc_begin_upload
+
+; ---- Upload loader
+
+	ldx #$0000
+-
+	lda @loader,x
+	jsr spc_upload_byte
+	inx
+	cpy #31		; size of loader
+	bne -
+
+; ---- Upload SP, PC & PSW
+
+	lda @SPC_HEADER+43
+	jsr spc_upload_byte
+	lda @SPC_HEADER+38
+	jsr spc_upload_byte
+	lda @SPC_HEADER+37
+	jsr spc_upload_byte
+	lda @SPC_HEADER+42
+	jsr spc_upload_byte
+
+; ---- Upload DSP registers
+
+	ldx #$0000
+-
+; initialize FLG and KON ($6c/$4c) to avoid artifacts
+	cpx #$4C
+	bne +
+	lda #$00
+	bra upload_skip_load
++
+	cpx #$6C
+	bne +
+	lda #$E0
+	bra upload_skip_load
++
+	lda @SPC_DSP_REGS,x
+upload_skip_load
+	jsr spc_upload_byte
+	inx
+	cpx #128
+	bne -
+
+; --- Upload fixed values for $F1-$F3
+
+	ldy #$00F1
+	jsr spc_next_upload
+
+	lda #$80        ; stop timers
+	jsr spc_upload_byte
+	lda #$6c        ; get dspaddr set for later
+	jsr spc_upload_byte
+	lda #$60
+	jsr spc_upload_byte
+
+; ---- Upload $f8-$1ff
+
+	ldy #$00F8
+	jsr spc_next_upload
+
+	ldx #$00F8
+-
+	lda @SPC_DATA,x
+	jsr spc_upload_byte
+	inx
+	cpx #$200
+	bne -
+
+; ---- Execute loader
+
+	ldy #$0002
+	jsr spc_execute
+	rts
+;---------------------------------------
+upload_high_ram:
+
+	ldy #$0002
+	jsr spc_begin_upload
+
+; ---- Upload transfer routine
+
+	ldx #$0000
+-
+	lda @transfer,x
+	jsr spc_upload_byte
+	inx
+	cpy #43		; size of transfer routine
+	bne -
+
+	ldx #$023f	; prepare transfer address
+
+; ---- Execute transfer routine
+
+	ldy #$0002
+	sty APUIO2
+	stz APUIO1
+	lda APUIO0
+	inc
+	inc
+	sta APUIO0
+; Wait for acknowledgement
+-
+	cmp APUIO0
+	bne -
+
+; ---- Burst transfer of 63.5K using custom routine
+
+outer_transfer_loop:
+	ldy #$003f		; 3
+inner_transfer_loop:
+	lda @SPC_DATA,x		; 5 |
+	sta APUIO0		; 4 |
+	lda @SPC_DATA+$40,x	; 5 |
+	sta APUIO1		; 4 |
+	lda @SPC_DATA+$80,x	; 5 |
+	sta APUIO2		; 4 |
+	lda @SPC_DATA+$C0,x	; 5 |
+	sta APUIO3		; 4 |
+	tya			; 2 >> 38 cycles
+-
+	cmp APUIO3		; 4 |
+	bne -			; 3 |
+	dex			; 2 |
+	dey			; 2 |
+	bpl inner_transfer_loop	; 3 >> 14 cycles
+
+	rep #$21 : .al		; 3 |
+	txa			; 2 |
+	adc #$140		; 3 |
+	tax			; 2 |
+	sep #$20 : .as		; 3 |
+	cpx #$003f		; 3 |
+	bne outer_transfer_loop	; 3 >> 19 cycles
+
+	rts
+
+;---------------------------------------
+upload_low_ram:
+
+; ---- Upload $0002-$00EF using IPL
+
+	ldy #$0002
+	jsr spc_begin_upload
+
+	ldx #$0002
+-
+	lda @SPC_DATA,x
+	jsr spc_upload_byte
+	inx
+	cpx #$00F0
+	bne -
+	rts
+;---------------------------------------
+; Executes final restoration code
+restore_final:
+	jsr start_exec_io ; prepare execution from I/O registers
+
+	stz $420d	; SPC700 I/O code requires SLOW timing
+
+; ---- Restore first two bytes of RAM
+
+	lda @SPC_DATA
+	xba
+	lda #$e8	; MOV A,#@SPC_DATA
+	tax
+	jsr exec_instr
+	ldx #$00C4	; MOV $00,A
+	jsr exec_instr
+
+	lda @SPC_DATA+1
+	xba
+	lda #$e8	; MOV A,#@SPC_DATA+1
+	tax
+	jsr exec_instr
+	ldx #$01C4	; MOV $01,A
+	jsr exec_instr
+
+; ---- Restore SP
+
+	lda @SPC_HEADER+43
+	sec
+	sbc #3
+	xba
+	lda #$cd	; MOV X,#@SPC_HEADER+43
+	tax
+	jsr exec_instr
+	ldx #$bd	; MOV SP,X
+	jsr exec_instr
+
+; ---- Restore X
+
+	lda @SPC_HEADER+40
+	xba
+	lda #$cd	; MOV X,#@SPC_HEADER+40
+	tax
+	jsr exec_instr
+
+; ---- Restore Y
+
+	lda @SPC_HEADER+41
+	xba
+	lda #$8d	; MOV Y,#@SPC_HEADER+41
+	tax
+	jsr exec_instr
+
+; ---- Restore DSP FLG register
+
+	lda @SPC_DSP_REGS+$6c
+	xba
+	lda #$e8	; MOV A,#@SPC_DSP_REGS+$6c
+	tax
+	jsr exec_instr
+	ldx #$f3C4	; MOV $f3,A -> $f2 has been set-up before by SPC700 loader
+	jsr exec_instr
+
+; ---- wait a bit (the newer S-APU takes its time to ramp up the volume)
+	lda #$10
+-	pha
+	jsr waitblank
+	pla
+	dec
+	bne -
+
+; ---- Restore DSP KON register
+
+	lda #$4C
+	xba
+	lda #$e8	; MOV A,#$4c
+	tax
+	jsr exec_instr
+	ldx #$f2C4	; MOV $f2,A
+	jsr exec_instr
+	lda @SPC_DSP_REGS+$4C
+	xba
+	lda #$e8	; MOV A,#@SPC_DSP_REGS+$4c
+	tax
+	jsr exec_instr
+	ldx #$f3C4	; MOV $f3,A
+	jsr exec_instr
+
+; ---- Restore DSP register address
+
+ 	lda @SPC_DATA+$F2
+	xba
+	lda #$e8	; MOV A,#@SPC_DATA+$F2
+	tax
+	jsr exec_instr
+	ldx #$f2C4	; MOV dest,A
+	jsr exec_instr
+
+; ---- Restore CONTROL register
+
+	lda @SPC_DATA+$F1
+	and #$CF	; don't clear input ports
+	xba
+	lda #$e8	; MOV A,#@SPC_DATA+$F1
+	tax
+	jsr exec_instr
+	ldx #$f1C4  	; MOV $F1,A
+	jsr exec_instr
+
+;---- Restore A
+
+	lda @SPC_HEADER+39
+	xba
+	lda #$e8	; MOV A,#@SPC_HEADER+39
+	tax
+	jsr exec_instr
+
+;---- Restore PSW and PC
+
+	ldx #$7F00	; NOP; RTI
+	stx APUIO0
+	lda #$FC	; Patch loop to execute instruction just written
+	sta APUIO3
+
+;---- restore IO ports $f4 - $f7
+
+	rep #$20 : .al
+	lda @SPC_DATA+$F4
+	tax
+	lda @SPC_DATA+$F6
+	sta APUIO2
+	stx APUIO0	; last to avoid overwriting RETI before run
+	sep #$20 : .as
+
+	lda #$01
+	sta $420d	; restore FAST CPU operation
+	rts
+;---------------------------------------
+spc_begin_upload:
+
+	sty APUIO2	; Set address
+
+	ldy #$BBAA	; Wait for SPC
+-
+	cpy APUIO0
+	bne -
+
+	lda #$CC	; Send acknowledgement
+	sta APUIO1
+	sta APUIO0
+
+-       		; Wait for acknowledgement
+	cmp APUIO0
+	bne -
+
+	ldy #0		; Initialize index
+	rts
+;---------------------------------------
+spc_upload_byte:
+	sta APUIO1
+
+	tya		; Signal it's ready
+	sta APUIO0
+-     			; Wait for acknowledgement
+	cmp APUIO0
+	bne -
+
+	iny
+
+	rts
+;---------------------------------------
+spc_next_upload:
+	sty APUIO2
+
+; Send command
+; Special case operation has been fully tested.
+	lda APUIO0
+	inc
+	inc
+	bne +
+	inc
++
+	sta APUIO1
+	sta APUIO0
+
+; Wait for acknowledgement
+-
+	cmp APUIO0
+	bne -
+
+	ldy #0
+	rts
+;---------------------------------------
+spc_execute:
+	sty APUIO2
+
+	stz APUIO1
+
+	lda APUIO0
+	inc
+	inc
+	sta APUIO0
+
+; Wait for acknowledgement
+-
+	cmp APUIO0
+	bne -
+
+	rts
+;---------------------------------------
+start_exec_io:
+; Set execution address
+	ldx #$00F5
+	stx APUIO2
+
+	stz APUIO1      ; NOP
+	ldx #$FE2F      ; BRA *-2
+
+; Signal to SPC that we're ready
+	lda APUIO0
+	inc
+	inc
+	sta APUIO0
+
+; Wait for acknowledgement
+-
+	cmp APUIO0
+	bne -
+
+; Quickly write branch
+	stx APUIO2
+
+	rts
+;---------------------------------------
+exec_instr:
+; Replace instruction
+	stx APUIO0
+	lda #$FC
+	sta APUIO3      ; 30
+
+        ; SPC BRA loop takes 4 cycles, so it reads
+        ; the branch offset every 4 SPC cycles (84 master).
+        ; We must handle the case where it read just before
+        ; the write above, and when it reads just after it.
+        ; If it reads just after, we have at least 7 SPC
+        ; cycles (147 master) to change restore the branch
+        ; offset.
+
+        ; 48 minimum, 90 maximum
+        ora #0
+        ora #0
+        ora #0
+        nop
+        nop
+        nop
+
+        ; 66 delay, about the middle of the above limits
+	phd ;4
+	pld ;5
+
+        ; Give plenty of extra time if single execution
+        ; isn't needed, as this avoids such tight timing
+        ; requirements.
+
+;	phd ;4
+;	pld ;5
+;	phd ;4
+;	pld ;5
+
+        ; Patch loop to skip first two bytes
+	lda #$FE        ; 16
+	sta APUIO3      ; 30
+
+        ; 38 minimum (assuming 66 delay above)
+	phd ; 4
+	pld ; 5
+
+        ; Give plenty of extra time if single execution
+        ; isn't needed, as this avoids such tight timing
+        ; requirements.
+
+	phd
+	pld
+	phd
+	pld
+	rts

snes/sysinfo.a65

@@ -0,0 +1,134 @@
+#include "memmap.i65"
+
+; sysinfo.a65: display sysinfo text block
+.byt "===SHOW_SYSINFO==="
+show_sysinfo:
+	php
+	sep #$20 : .as
+	rep #$10 : .xl
+	stz bar_wl
+	dec bar_wl
+	stz bar_xl
+	dec bar_xl
+	stz bar_yl
+	dec bar_yl
+	jsr backup_screen
+	lda #^text_mm_sysinfo
+	sta window_tbank
+	ldx #!text_mm_sysinfo
+	stx window_taddr
+	lda @sysinfo_win_x
+	sta window_x
+	inc
+	inc
+	pha
+	stz print_x+1
+	lda @sysinfo_win_y
+	sta window_y
+	inc
+	inc
+	pha
+	stz print_y+1
+	lda @sysinfo_win_w
+	sta window_w
+	lda @sysinfo_win_h
+	sta window_h
+	jsr draw_window
+	stz print_pal
+	
+	ldx #38
+copy_snes_system_text:
+	lda @text_system,x
+	sta @snes_system_config,x
+	dex
+	bpl copy_snes_system_text
+	
+sysinfo_printloop:
+	sep #$20 : .as
+	rep #$10 : .xl
+	lda #CMD_SYSINFO
+	sta @MCU_CMD
+	lda #^SYSINFO_BLK
+	ldx #!SYSINFO_BLK
+	sta print_bank
+	stx print_src
+	stz print_pal
+	pla
+	sta print_y
+	pla
+	sta print_x
+	lda #40
+	sta print_count
+	lda #12
+-	pha
+	jsr hiprint
+	inc print_y
+	rep #$20 : .al
+	lda print_src
+	clc
+	adc #40
+	sta print_src
+	sep #$20 : .as
+	pla
+	dec
+	bne -
+	
+	ldx #24
+	lda $213e
+	and #$0f
+	clc
+	adc #$30
+	sta @snes_system_config,x
+	
+	ldx #38
+	lda $213f
+	and #$0f
+	clc
+	adc #$30
+	sta @snes_system_config,x
+	
+	ldx #10
+	lda $4210
+	and #$0f
+	clc
+	adc #$30
+	sta @snes_system_config,x		
+	
+	lda #^snes_system_config		; System text
+	ldx #!snes_system_config
+	sta print_bank
+	stx print_src
+	stz print_pal
+	lda #39
+	sta print_count
+	lda #23
+	sta print_y
+	lda #12
+	sta print_x
+	jsr hiprint		
+	
+-	lda isr_done
+	lsr
+	bcc -
+	jsr printtime
+	jsr read_pad
+	lda #$80
+	and pad1trig
+	bne +
+	lda #$80
+	and pad1trig+1
+	bne +
+	lda @sysinfo_win_x
+	inc
+	inc
+	pha
+	lda @sysinfo_win_y
+	inc
+	inc
+	pha
+	jmp sysinfo_printloop
++	plp
+	jsr restore_screen
+	lda #$00
+	sta @MCU_CMD
+	rtl

snes/text.a65

@@ -1,143 +1,95 @@
 .text
 #include "memmap.i65"
 .byt "===HIPRINT==="
+; input:
+; print_count
+; print_x
+; print_y
+; print_src
+; print_bank
+; print_pal
+;
+; output:
+; print_done (# of chars printed)
+; print_over (char after print_count)
+
 hiprint:
+	php
 	sep #$20 : .as
-	lda print_count
-	sta print_count_tmp
-	rep #$30 : .xl : .al
-	stz print_done
-	lda print_x
-	and #$00ff
-	lsr
-	bcs print_bg1
-	ldx #!BG1_TILE_BUF ; for 2nd loop
-	phx
-	ldx #!BG2_TILE_BUF ; for 1st loop
-	phx
-	bra print_bg_cont
-print_bg1
-	ldx #!BG2_TILE_BUF+2 ; for 2nd loop
-	phx
-	ldx #!BG1_TILE_BUF ; for 1st loop da whoop
-	phx
-	bra print_bg_cont
-print_bg_cont
-	sta !print_temp
-	lda !print_y
-	and #$00ff
-	asl
-	asl
-	asl
-	asl
-	asl
-	clc
-	adc !print_temp
-	asl ; double the offset for WRAM addressing
-	tay	; zonday
-	plx
-	phy	; offset from tilemap start
-	stx !print_temp
-	clc
-	adc !print_temp
-; we need to transfer to WRAM and from there to VRAM via DMA during VBLANK
-; because VRAM can only be accessed during VBLANK and forced blanking.
-	sta $2181
-	sep #$20 : .as
-	lda #$7f ;we really only need bit 0. full bank given for clarity
-	sta $2183
-print_loop
-	ldx !print_src
-	lda !print_bank
-	pha
-	plb
-	phx	; source addr
-print_loop_inner
-	lda !0,x
-	bne +
-	jmp print_end2
-+	asl
-	sta @$2180
-	lda @print_pal
-	asl
-	asl
-	adc #$00
-	ora #$20
-	sta @$2180
-	lda @print_done
-	inc
-	sta @print_done
-	inx
-	lda !0,x
-	beq print_loop2
-	inx
-	lda !0,x
-	beq print_loop2
-	lda @print_count_tmp
-	dec
-	dec
-	sta @print_count_tmp
-	beq print_loop2
-	bmi print_loop2
-	bra print_loop_inner
-print_loop2
-	lda @print_count
-	dec
-	sta @print_count_tmp
-	beq print_end2
-	lda #$00
+	rep #$10 : .xl
+	ldx print_src
+	stx print_ptr
+	lda print_bank
+	sta print_ptr+2
+	phb
+	lda #$7e
 	pha
 	plb
 	rep #$30 : .al : .xl
-	ply	; source addr
-	iny
-	pla	; offset from tilemap start
-	plx	; other tilemap addr
-	stx !print_temp
+	lda print_pal
+	and #$00ff
+	xba
+	asl
+	asl
+	ora #$2000
+	sta print_temp
+	lda print_count
+	and #$00ff
+	beq hiprint_end
+	tay
+	lda print_x
+	and #$00ff
+	sta print_x
+	lda print_y
+	and #$00ff
+	asl
+	asl
+	asl
+	asl
+	asl
+	asl
 	clc
-	adc !print_temp ; tilemap+offset
-	sta $2181
-	tyx
+	adc print_x
+	and #$fffe
+	tax
+	lda print_x
+	lsr
+	bcs hiprint_bg1
+hiprint_bg2
+	lda [print_ptr]
+	and #$00ff
+	beq hiprint_end
+	inc print_ptr
+	asl
+	ora print_temp
+	sta !BG2_TILE_BUF, x
+	dey
+	beq hiprint_end
+hiprint_bg1
+	lda [print_ptr]
+	and #$00ff
+	beq hiprint_end
+	inc print_ptr
+	asl
+	ora print_temp
+	sta !BG1_TILE_BUF, x
+	inx
+	inx
+	dey
+	beq hiprint_end
+	bra hiprint_bg2
+hiprint_end
+	plb
 	sep #$20 : .as
-	lda print_bank
-	pha
-	plb
-print_loop2_inner
-	lda !0,x
-	bne +
-	jmp print_end
-+	asl
-	sta @$2180
-	lda @print_pal
-	asl
-	asl
-	adc #$00
-	ora #$20
-	sta @$2180
-	lda @print_done
+	lda [print_ptr]
+	sta print_over
+	tya
+	sec
+	sbc print_count
+	eor #$ff
 	inc
-	sta @print_done
-	inx
-	lda !0,x
-	beq print_end
-	inx
-	lda !0,x
-	beq print_end
-	lda @print_count_tmp
-	dec
-	dec
-	sta @print_count_tmp
-	beq print_end
-	bmi print_end
-	bra print_loop2_inner
-print_end2 ; clean up the stack (6 bytes)
-	ply
-	ply
-	ply
-print_end
-	lda #$00
-	pha
-	plb
+	sta print_done
+	plp
 	rts
 
 
@@ -287,6 +239,7 @@ draw_window:
 	sta print_count
 	jsr hiprint
 	lda print_done
+	clc
 	adc print_x
 	sta print_x
 	lda #^window_tr

snes/time.a65

@@ -86,7 +86,7 @@ time_update
 	lda #$00
 	xba
 	tax
-	lda !timebox_data, x
+	lda @timebox_data, x
 	clc
 	adc #$04
 	adc @time_win_x
@@ -95,10 +95,10 @@ time_update
 	adc #$02
 	sta bar_yl
 	inx
-	lda !timebox_data, x
+	lda @timebox_data, x
 	sta bar_wl
 	inx
-	lda !timebox_data, x
+	lda @timebox_data, x
 	sta time_ptr
 timeloop1
 	lda isr_done
@@ -263,12 +263,12 @@ time_inc_day
 	lda #$00
 	xba
 	tax
-	lda !time_month, x
+	lda @time_month, x
 	cmp time_d10
 	bne time_inc_day_normal
 	inx
 	jsr is_leapyear_feb
-	lda !time_month, x
+	lda @time_month, x
 	dec
 	adc #$00
 	cmp time_d1
@@ -309,13 +309,13 @@ time_adjust_mon
 	xba
 	tax
 	lda time_d10
-	cmp !time_month, x
+	cmp @time_month, x
 	bcs time_mon_adjust
 	rts
 time_mon_adjust
 	php
 	inx
-	lda !time_month, x
+	lda @time_month, x
 	pha
 	jsr is_leapyear_feb	; c=1 -> a leapyear february
 	pla
@@ -327,7 +327,7 @@ time_mon_adjust
 time_mon_doadjust
 	sta time_d1
 	dex
-	lda !time_month, x
+	lda @time_month, x
 	sta time_d10
 +
 	rts
@@ -446,10 +446,10 @@ time_dec_cont
 	asl
 	ldx #$0000
 	tax
-	lda !time_month, x
+	lda @time_month, x
 	sta time_d10
 	inx
-	lda !time_month, x
+	lda @time_month, x
 	pha
 	jsr is_leapyear_feb
 	pla
@@ -499,6 +499,8 @@ time_dec_y1_normal
 	rts
 
 gettime
+	php
+	sep #$20 : .as
 	lda #$0d
 	sta $2801
 	lda $2800
@@ -526,6 +528,7 @@ gettime
 	sta time_y10
 	lda $2800
 	sta time_y100
+	plp
 	rts
 
 rendertime
@@ -677,31 +680,31 @@ is_leapyear_400th
 
 settime
 	lda time_y100
-	sta @AVR_PARAM
+	sta @MCU_PARAM
 	lda time_y10
-	sta @AVR_PARAM+1
+	sta @MCU_PARAM+1
 	lda time_y1
-	sta @AVR_PARAM+2
+	sta @MCU_PARAM+2
 	lda time_mon
-	sta @AVR_PARAM+3
+	sta @MCU_PARAM+3
 	lda time_d10
-	sta @AVR_PARAM+4
+	sta @MCU_PARAM+4
 	lda time_d1
-	sta @AVR_PARAM+5
+	sta @MCU_PARAM+5
 	lda time_h10
-	sta @AVR_PARAM+6
+	sta @MCU_PARAM+6
 	lda time_h1
-	sta @AVR_PARAM+7
+	sta @MCU_PARAM+7
 	lda time_m10
-	sta @AVR_PARAM+8
+	sta @MCU_PARAM+8
 	lda time_m1
-	sta @AVR_PARAM+9
+	sta @MCU_PARAM+9
 	lda time_s10
-	sta @AVR_PARAM+10
+	sta @MCU_PARAM+10
 	lda time_s1
-	sta @AVR_PARAM+11
+	sta @MCU_PARAM+11
 	lda #$02 ; set clock
-	sta @AVR_CMD
+	sta @MCU_CMD
 	rts
 
 printtime:
@@ -710,8 +713,6 @@ printtime:
         lda listdisp
         clc
         adc #$0a
-        clc
-        adc vidmode
         sta print_y
         lda #$2b
         sta print_x

src/Makefile

@@ -55,7 +55,7 @@ TARGET = $(OBJDIR)/sd2snes
 
 
 # List C source files here. (C dependencies are automatically generated.)
-SRC = main.c ff.c ccsbcs.c clock.c uart.c power.c led.c timer.c printf.c spi.c fileops.c rtc.c fpga.c fpga_spi.c snes.c smc.c memory.c filetypes.c faulthandler.c sort.c crc32.c cic.c cli.c xmodem.c irq.c rle.c sdnative.c msu1.c crc16.c sysinfo.c
+SRC = main.c ff.c ccsbcs.c clock.c uart.c power.c led.c timer.c printf.c spi.c fileops.c rtc.c fpga.c fpga_spi.c snes.c smc.c memory.c filetypes.c faulthandler.c sort.c crc32.c cic.c cli.c xmodem.c irq.c rle.c sdnative.c msu1.c crc16.c sysinfo.c cfg.c
 
 # usbcontrol.c usb_hid.c usbhw_lpc.c usbinit.c usbstdreq.c
 
@@ -75,7 +75,7 @@ ASRC = startup.S crc.S
 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 # Use s -mcall-prologues when you really need size...
 #OPT = 2
-OPT = 2
+OPT = s
 
 # Debugging format.
 DEBUG = dwarf-2
@@ -124,7 +124,8 @@ NM = $(ARCH)-nm
 REMOVE = rm -f
 COPY = cp
 AWK = awk
-
+RLE = ../utils/rle
+BIN2H = utils/bin2h
 
 #---------------- Compiler Options ----------------
 #  -g*:          generate debugging information
@@ -197,7 +198,7 @@ ALL_ASFLAGS = -I. -x assembler-with-cpp $(ASFLAGS) $(CDEFS)
 # Default target.
 all: build
 
-build: elf bin hex
+build: elf bin hex cfgware.h
 	$(E) "  SIZE   $(TARGET).elf"
 	$(Q)$(ELFSIZE)|grep -v debug
 	cp $(TARGET).bin $(OBJDIR)/firmware.img
@@ -230,6 +231,13 @@ HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
 ELFSIZE = $(SIZE) -A $(TARGET).elf
 
 
+# Generate cfgware.h
+cfgware.h: $(OBJDIR)/fpga_rle.bit
+	$(E) "  BIN2H  $@"
+	$(Q) $(BIN2H) $< $@
+$(OBJDIR)/fpga_rle.bit: sd2sneslite.bit
+	$(E) "  RLE    $@"
+	$(Q) $(RLE) $< $@
 
 # Generate autoconf.h from config
 .PRECIOUS : $(OBJDIR)/autoconf.h
@@ -302,6 +310,7 @@ clean_list :
 	$(Q)$(REMOVE) $(TARGET).sym
 	$(Q)$(REMOVE) $(TARGET).lss
 	$(Q)$(REMOVE) $(OBJ)
+	$(Q)$(REMOVE) cfgware.h
 	$(Q)$(REMOVE) $(OBJDIR)/autoconf.h
 	$(Q)$(REMOVE) $(OBJDIR)/*.bin
 	$(Q)$(REMOVE) $(LST)

src/README

@@ -17,6 +17,7 @@ b) Cortex M3 toolchain
     - texinfo
     - libmpfr-dev
     - libgmp3-dev
+    - libmpc-dev
     - gawk
     - bison
     - recode
@@ -25,6 +26,7 @@ b) Cortex M3 toolchain
     - libexpat-dev
     - make
     - gcc
+   Package names may differ for your distribution.
    Newer gccs complain when compiling binutils, so you may have to add
    '--disable-werror' to the compiler options for binutils in the Makefile.
    The Makefile will install immediately so make sure you can write to the

src/bootldr/config.h

@@ -1,7 +1,7 @@
 #ifndef _CONFIG_H
 #define _CONFIG_H
 
-//#define DEBUG_BL
+// #define DEBUG_BL
 // #define DEBUG_SD
 // #define DEBUG_IRQ
 
@@ -55,7 +55,8 @@
 //#define CONFIG_CPU_FREQUENCY      46000000
 #define CONFIG_UART_PCLKDIV       1
 #define CONFIG_UART_TX_BUF_SHIFT  8
-#define CONFIG_UART_BAUDRATE      921600
+//#define CONFIG_UART_BAUDRATE      921600
+#define CONFIG_UART_BAUDRATE      115200
 #define CONFIG_UART_DEADLOCKABLE
 
 #define SSP_CLK_DIVISOR_FAST 2

src/bootldr/fileops.h

@@ -31,7 +31,7 @@
 
 enum filestates { FILE_OK=0, FILE_ERR, FILE_EOF };
 
-BYTE file_buf[512];
+BYTE file_buf[512] __attribute__((aligned(4)));
 FATFS fatfs;
 FIL file_handle;
 FRESULT file_res;

src/bootldr/iap.c

@@ -189,7 +189,7 @@ FLASH_RES flash_file(uint8_t *filename) {
       }
       DBG_UART uart_putc('w');
       if((res = iap_ram2flash(flash_addr, file_buf, 512)) != CMD_SUCCESS) {
-        DBG_BL printf("error %ld while writing to address %08lx (sector %d)\n", res, flash_addr, current_sec);
+        DBG_BL printf("error %ld while writing from %08lX to address %08lx (sector %d)\n", res, (uint32_t)file_buf, flash_addr, current_sec);
         DBG_UART uart_putc('X');
         return ERR_FLASH;
       }

src/bootldr/lpc1754.cfg

@@ -27,9 +27,9 @@ if { [info exists CPUTAPID ] } {
 
 #delays on reset lines
 #if your OpenOCD version rejects "jtag_nsrst_delay" replace it with:
-#adapter_nsrst_delay 200
-jtag_nsrst_delay 200
-jtag_ntrst_delay 200
+adapter_nsrst_delay 200
+#jtag_nsrst_delay 200
+#jtag_ntrst_delay 200
 
 # LPC2000 & LPC1700 -> SRST causes TRST
 #reset_config srst_pulls_trst
@@ -56,7 +56,7 @@ flash bank $_FLASHNAME lpc2000 0x0 0x20000 0 0 $_TARGETNAME \
 # Run with *real slow* clock by default since the
 # boot rom could have been playing with the PLL, so
 # we have no idea what clock the target is running at.
-jtag_khz 1000
+adapter_khz 1000
 
 $_TARGETNAME configure -event reset-init {
 	# Do not remap 0x0000-0x0020 to anything but the flash (i.e. select

src/bootldr/main.c

@@ -23,7 +23,7 @@ int i;
 volatile enum diskstates disk_state;
 extern volatile tick_t ticks;
 
-int (*chain)(void) = (void*)(FW_START+0x000001c5);
+int (*chain)(void);
 
 int main(void) {
   SNES_CIC_PAIR_REG->FIODIR = BV(SNES_CIC_PAIR_BIT);
@@ -52,8 +52,12 @@ int main(void) {
   clock_init();
 //  LPC_PINCON->PINSEL0 |= BV(20) | BV(21);                  /* MAT3.0 (FPGA clock) */
   sdn_init();
+
+  for(i = 0; i < 20; i++) uart_putc('-');
+  uart_putc('\n');
+
   DBG_BL printf("chksum=%08lx\n", *(uint32_t*)28);
-  DBG_BL printf("\n\nsd2snes mk.2 bootloader\nver.: " VER "\ncpu clock: %ld Hz\n", CONFIG_CPU_FREQUENCY);
+  /*DBG_BL*/ printf("\n\nsd2snes mk.2 bootloader\nver.: " VER "\ncpu clock: %ld Hz\n", CONFIG_CPU_FREQUENCY);
 DBG_BL printf("PCONP=%lx\n", LPC_SC->PCONP);
 /* setup timer (fpga clk) */
   LPC_TIM3->CTCR=0;
@@ -86,6 +90,16 @@ DBG_BL printf("PCONP=%lx\n", LPC_SC->PCONP);
   NVIC_DisableIRQ(UART_IRQ);
 
   SCB->VTOR=FW_START+0x00000100;
+  chain = (void*)(*((uint32_t*)(FW_START+0x00000104)));
+  uart_putc("0123456789abcdef"[((uint32_t)chain>>28)&15]);
+  uart_putc("0123456789abcdef"[((uint32_t)chain>>24)&15]);
+  uart_putc("0123456789abcdef"[((uint32_t)chain>>20)&15]);
+  uart_putc("0123456789abcdef"[((uint32_t)chain>>16)&15]);
+  uart_putc("0123456789abcdef"[((uint32_t)chain>>12)&15]);
+  uart_putc("0123456789abcdef"[((uint32_t)chain>>8)&15]);
+  uart_putc("0123456789abcdef"[((uint32_t)chain>>4)&15]);
+  uart_putc("0123456789abcdef"[((uint32_t)chain)&15]);
+  uart_putc('\n');
   chain();
   while(1);
 }

src/bootldr/openocd-usb.cfg

@@ -5,8 +5,14 @@
 #
 
 interface ft2232
-ft2232_vid_pid 0x0403 0x6010
-ft2232_device_desc "Dual RS232"
-ft2232_layout "oocdlink"
-ft2232_latency 2
+ft2232_vid_pid 0x15ba 0x0003
+ft2232_device_desc "Olimex OpenOCD JTAG"
+ft2232_layout "olimex-jtag"
+
+
+#interface ft2232
+#ft2232_vid_pid 0x0403 0x6010
+#ft2232_device_desc "Dual RS232"
+#ft2232_layout "oocdlink"
+#ft2232_latency 2
 #adapter_khz 10

src/bootldr/uart.c

@@ -119,7 +119,7 @@ void uart_init(void) {
 
   /* set baud rate - no fractional stuff for now */
   UART_REGS->LCR = BV(7) | 3; // always 8n1
-  div = 0x850004; // baud2divisor(CONFIG_UART_BAUDRATE);
+  div = 0xF80022; //0x850004; // baud2divisor(CONFIG_UART_BAUDRATE);
 
   UART_REGS->DLL = div & 0xff;
   UART_REGS->DLM = (div >> 8) & 0xff;

src/cfg.c

@@ -0,0 +1,59 @@
+#include "cfg.h"
+#include "config.h"
+#include "uart.h"
+#include "fileops.h"
+
+cfg_t CFG = {
+  .cfg_ver_maj = 1,
+  .cfg_ver_min = 0,
+  .last_game_valid = 0,
+  .vidmode_menu = VIDMODE_AUTO,
+  .vidmode_game = VIDMODE_AUTO,
+  .pair_mode_allowed = 0,
+  .bsx_use_systime = 0,
+  .bsx_time = 0x0619970301180530LL
+};
+
+int cfg_save() {
+  int err = 0;
+  file_open(CFG_FILE, FA_CREATE_ALWAYS | FA_WRITE);
+  if(file_writeblock(&CFG, 0, sizeof(CFG)) < sizeof(CFG)) {
+    err = file_res;
+  }
+  file_close();
+  return err;
+}
+
+int cfg_load() {
+  int err = 0;
+  file_open(CFG_FILE, FA_READ);
+  if(file_readblock(&CFG, 0, sizeof(CFG)) < sizeof(CFG)) {
+    err = file_res;
+  }
+  file_close();
+  return err;
+}
+
+int cfg_save_last_game(uint8_t *fn) {
+  int err = 0;
+  file_open(LAST_FILE, FA_CREATE_ALWAYS | FA_WRITE);
+  err = f_puts((const TCHAR*)fn, &file_handle);
+  file_close();
+  return err;
+}
+
+int cfg_get_last_game(uint8_t *fn) {
+  int err = 0;
+  file_open(LAST_FILE, FA_READ);
+  f_gets((TCHAR*)fn, 255, &file_handle);
+  file_close();
+  return err;
+}
+
+void cfg_set_last_game_valid(uint8_t valid) {
+  CFG.last_game_valid = valid;
+}
+
+uint8_t cfg_is_last_game_valid() {
+  return CFG.last_game_valid;
+}

src/cfg.h

@@ -0,0 +1,39 @@
+#ifndef _CFG_H
+#define _CFG_H
+
+#include <stdint.h>
+
+#define CFG_FILE ((const uint8_t*)"/sd2snes/sd2snes.cfg")
+#define LAST_FILE ((const uint8_t*)"/sd2snes/lastgame.cfg")
+
+typedef enum {
+  VIDMODE_AUTO = 0,
+  VIDMODE_60,
+  VIDMODE_50
+} cfg_vidmode_t;
+
+typedef struct _cfg_block {
+  uint8_t cfg_ver_maj;
+  uint8_t cfg_ver_min;
+  uint8_t last_game_valid;
+  uint8_t vidmode_menu;
+  uint8_t vidmode_game;
+  uint8_t pair_mode_allowed;
+  uint8_t bsx_use_systime;
+  uint64_t bsx_time;
+} cfg_t;
+
+int cfg_save(void);
+int cfg_load(void);
+
+int cfg_save_last_game(uint8_t *fn);
+int cfg_get_last_game(uint8_t *fn);
+
+cfg_vidmode_t cfg_get_vidmode_menu(void);
+cfg_vidmode_t cfg_get_vidmode_game(void);
+
+void cfg_set_last_game_valid(uint8_t);
+uint8_t cfg_is_last_game_valid(void);
+uint8_t cfg_is_pair_mode_allowed(void);
+
+#endif

src/cli.c

@@ -58,8 +58,8 @@ static char *curchar;
 
 /* Word lists */
 static char command_words[] =
-  "cd\0reset\0sreset\0dir\0ls\0test\0resume\0loadrom\0loadraw\0saveraw\0put\0rm\0d4\0vmode\0mapper\0settime\0time\0setfeature\0hexdump\0w8\0w16\0";
-enum { CMD_CD = 0, CMD_RESET, CMD_SRESET, CMD_DIR, CMD_LS, CMD_TEST, CMD_RESUME, CMD_LOADROM, CMD_LOADRAW, CMD_SAVERAW, CMD_PUT, CMD_RM, CMD_D4, CMD_VMODE, CMD_MAPPER, CMD_SETTIME, CMD_TIME, CMD_SETFEATURE, CMD_HEXDUMP, CMD_W8, CMD_W16 };
+  "cd\0reset\0sreset\0dir\0ls\0test\0exit\0loadrom\0loadraw\0saveraw\0put\0rm\0mkdir\0d4\0vmode\0mapper\0settime\0time\0setfeature\0hexdump\0w8\0w16\0memset\0";
+enum { CMD_CD = 0, CMD_RESET, CMD_SRESET, CMD_DIR, CMD_LS, CMD_TEST, CMD_EXIT, CMD_LOADROM, CMD_LOADRAW, CMD_SAVERAW, CMD_PUT, CMD_RM, CMD_MKDIR, CMD_D4, CMD_VMODE, CMD_MAPPER, CMD_SETTIME, CMD_TIME, CMD_SETFEATURE, CMD_HEXDUMP, CMD_W8, CMD_W16, CMD_MEMSET };
 
 /* ------------------------------------------------------------------------- */
 /*   Parse functions                                                         */
@@ -104,11 +104,11 @@ static int32_t parse_unsigned(uint32_t lower, uint32_t upper, uint8_t base) {
 /* Parse the string starting with curchar for a word in wordlist */
 static int8_t parse_wordlist(char *wordlist) {
   uint8_t i, matched;
-  char *cur, *ptr;
-  char c;
+  unsigned char *cur, *ptr;
+  unsigned char c;
 
   i = 0;
-  ptr = wordlist;
+  ptr = (unsigned char *)wordlist;
 
   // Command list on "?"
   if (strlen(curchar) == 1 && *curchar == '?') {
@@ -128,7 +128,7 @@ static int8_t parse_wordlist(char *wordlist) {
   }
 
   while (1) {
-    cur = curchar;
+    cur = (unsigned char *)curchar;
     matched = 1;
     c = *ptr;
     do {
@@ -138,9 +138,9 @@ static int8_t parse_wordlist(char *wordlist) {
         return -1;
       }
 
-      if (tolower(c) != tolower(*cur)) {
+      if (tolower((int)c) != tolower((int)*cur)) {
         // Check for end-of-word
-        if (cur != curchar && (*cur == ' ' || *cur == 0)) {
+        if (cur != (unsigned char*)curchar && (*cur == ' ' || *cur == 0)) {
           // Partial match found, return that
           break;
         } else {
@@ -156,7 +156,7 @@ static int8_t parse_wordlist(char *wordlist) {
     if (matched) {
       char *tmp = curchar;
 
-      curchar = cur;
+      curchar = (char *)cur;
       // Return match only if whitespace or end-of-string follows
       // (avoids mismatching partial words)
       if (skip_spaces()) {
@@ -269,7 +269,7 @@ static void cmd_show_directory(void) {
       strlwr((char *)name);
     }
 
-    printf("%s",name);
+    printf("%s [%s] (%ld)",finfo.lfname, finfo.fname, finfo.fsize);
 
     /* Directory indicator (Unix-style) */
     if (finfo.fattrib & AM_DIR)
@@ -294,7 +294,8 @@ static void cmd_loadraw(void) {
 static void cmd_saveraw(void) {
   uint32_t address = parse_unsigned(0,16777216,16);
   uint32_t length = parse_unsigned(0,16777216,16);
-  save_sram((uint8_t*)curchar, length, address);
+  if(address != -1 && length != -1)
+    save_sram((uint8_t*)curchar, length, address);
 }
 
 static void cmd_d4(void) {
@@ -348,6 +349,11 @@ void cmd_rm(void) {
   if(res) printf("Error %d removing %s\n", res, curchar);
 }
 
+void cmd_mkdir(void) {
+  FRESULT res = f_mkdir(curchar);
+  if(res) printf("Error %d creating directory %s\n", res, curchar);
+}
+
 void cmd_mapper(void) {
   int32_t mapper;
   mapper = parse_unsigned(0,7,10);
@@ -361,9 +367,7 @@ void cmd_sreset(void) {
     resetstate = parse_unsigned(0,1,10);
     snes_reset(resetstate);
   } else {
-    snes_reset(1);
-    delay_ms(20);
-    snes_reset(0);
+    snes_reset_pulse();
   }
 }
 void cmd_settime(void) {
@@ -416,6 +420,13 @@ void cmd_w16(void) {
   sram_writeshort(val, offset);
 }
 
+void cmd_memset(void) {
+  uint32_t offset = parse_unsigned(0, 16777215, 16);
+  uint32_t len = parse_unsigned(0, 16777216, 16);
+  uint8_t val = parse_unsigned(0, 255, 16);
+  sram_memset(offset, len, val);
+}
+
 /* ------------------------------------------------------------------------- */
 /*   CLI interface functions                                                 */
 /* ------------------------------------------------------------------------- */
@@ -498,7 +509,7 @@ void cli_loop(void) {
       cmd_show_directory();
       break;
 
-    case CMD_RESUME:
+    case CMD_EXIT:
       return;
       break;
 
@@ -518,6 +529,10 @@ void cli_loop(void) {
       cmd_rm();
       break;
 
+    case CMD_MKDIR:
+      cmd_mkdir();
+      break;
+
     case CMD_D4:
       cmd_d4();
       break;
@@ -561,7 +576,11 @@ void cli_loop(void) {
     case CMD_W16:
       cmd_w16();
       break;
-    }
 
+    case CMD_MEMSET:
+      cmd_memset();
+      break;
+
+    }
   }
 }

src/clock.c

@@ -27,7 +27,7 @@ void clock_init() {
    -> FPGA freq = 11289473.7Hz
    First, disable and disconnect PLL0.
 */
-//  clock_disconnect();
+  clock_disconnect();
 
 /* PLL is disabled and disconnected. setup PCLK NOW as it cannot be changed
    reliably with PLL0 connected.
@@ -48,12 +48,19 @@ void clock_init() {
  */
   enableMainOsc();
   setClkSrc(CLKSRC_MAINOSC);
-// XXX  setPLL0MultPrediv(429, 19);
-// XXX  setPLL0MultPrediv(23, 2);
-  setPLL0MultPrediv(12, 1);
+  setPLL0MultPrediv(22, 1);
   enablePLL0();
-  setCCLKDiv(3);
+  setCCLKDiv(6);
   connectPLL0();
+
+
+/* configure PLL1 for USB operation */
+  disconnectPLL1();
+  disablePLL1();
+  LPC_SC->PLL1CFG = 0x23;
+  enablePLL1();
+  connectPLL1();
+
 }
 
 void setFlashAccessTime(uint8_t clocks) {
@@ -76,7 +83,7 @@ void disablePLL0() {
 }
 
 void connectPLL0() {
-  while(!(LPC_SC->PLL0STAT&PLOCK0));
+  while(!(LPC_SC->PLL0STAT & PLOCK0));
   LPC_SC->PLL0CON |= PLLC0;
   PLL0feed();
 }
@@ -86,6 +93,32 @@ void disconnectPLL0() {
   PLL0feed();
 }
 
+void setPLL1MultPrediv(uint16_t mult, uint8_t prediv) {
+  LPC_SC->PLL1CFG=PLL_MULT(mult) | PLL_PREDIV(prediv);
+  PLL1feed();
+}
+
+void enablePLL1() {
+  LPC_SC->PLL1CON |= PLLE1;
+  PLL1feed();
+}
+
+void disablePLL1() {
+  LPC_SC->PLL1CON &= ~PLLE1;
+  PLL1feed();
+}
+
+void connectPLL1() {
+  while(!(LPC_SC->PLL1STAT & PLOCK1));
+  LPC_SC->PLL1CON |= PLLC1;
+  PLL1feed();
+}
+
+void disconnectPLL1() {
+  LPC_SC->PLL1CON &= ~PLLC1;
+  PLL1feed();
+}
+
 void setCCLKDiv(uint8_t div) {
   LPC_SC->CCLKCFG=CCLK_DIV(div);
 }
@@ -104,6 +137,11 @@ void PLL0feed() {
   LPC_SC->PLL0FEED=0x55;
 }
 
+void PLL1feed() {
+  LPC_SC->PLL1FEED=0xaa;
+  LPC_SC->PLL1FEED=0x55;
+}
+
 void setClkSrc(uint8_t src) {
   LPC_SC->CLKSRCSEL=src;
 }

src/clock.h

@@ -8,6 +8,9 @@
 #define PLLE0           (1<<0)
 #define PLLC0           (1<<1)
 #define PLOCK0          (1<<26)
+#define PLLE1           (1<<0)
+#define PLLC1           (1<<1)
+#define PLOCK1          (1<<10)
 #define OSCEN           (1<<5)
 #define OSCSTAT         (1<<6)
 #define FLASHTIM(x)     (((x-1)<<12)|0x3A)
@@ -56,14 +59,18 @@ void clock_init(void);
 void setFlashAccessTime(uint8_t clocks);
 
 void setPLL0MultPrediv(uint16_t mult, uint8_t prediv);
-
 void enablePLL0(void);
-
 void disablePLL0(void);
-
 void connectPLL0(void);
-
 void disconnectPLL0(void);
+void PLL0feed(void);
+
+void setPLL1MultPrediv(uint16_t mult, uint8_t prediv);
+void enablePLL1(void);
+void disablePLL1(void);
+void connectPLL1(void);
+void disconnectPLL1(void);
+void PLL1feed(void);
 
 void setCCLKDiv(uint8_t div);
 
@@ -71,9 +78,5 @@ void enableMainOsc(void);
 
 void disableMainOsc(void);
 
-void PLL0feed(void);
-
 void setClkSrc(uint8_t src);
-
-
 #endif

src/config

@@ -1,4 +1,4 @@
-CONFIG_VERSION="0.1.2"
-#FWVER=00010200
-CONFIG_FWVER=66048
+CONFIG_VERSION="0.1.5"
+#FWVER=00010300
+CONFIG_FWVER=0x00010500
 CONFIG_MCU_FOSC=12000000

src/config.h

@@ -35,18 +35,15 @@
 
 #define CONFIG_UART_NUM	          3
 // #define CONFIG_CPU_FREQUENCY      90315789
-#define CONFIG_CPU_FREQUENCY      96000000
+#define CONFIG_CPU_FREQUENCY      88000000
 //#define CONFIG_CPU_FREQUENCY      46000000
 #define CONFIG_UART_PCLKDIV       1
 #define CONFIG_UART_TX_BUF_SHIFT  8
-#define CONFIG_UART_BAUDRATE      921600
+//#define CONFIG_UART_BAUDRATE      921600
+#define CONFIG_UART_BAUDRATE      115200
 #define CONFIG_UART_DEADLOCKABLE
 
-#define SSP_CLK_DIVISOR_FAST 2
-#define SSP_CLK_DIVISOR_SLOW 250
-
-#define SSP_CLK_DIVISOR_FPGA_FAST 6
-#define SSP_CLK_DIVISOR_FPGA_SLOW 20
+#define SSP_CLK_DIVISOR           2
 
 #define SNES_RESET_REG            LPC_GPIO1
 #define SNES_RESET_BIT            26
@@ -67,7 +64,11 @@
 #define FPGA_MCU_RDY_BIT          9
 
 #define QSORT_MAXELEM             2048
+#define SORT_STRLEN               256
 #define CLTBL_SIZE		  100
+
+#define DIR_FILE_MAX              16380
+
 #define SSP_REGS LPC_SSP0
 #define SSP_PCLKREG PCLKSEL1
 // 1: PCLKSEL0
@@ -95,4 +96,7 @@
 
 #define SD_DAT (LPC_GPIO2->FIOPIN0)
 
+#define USB_CONNREG LPC_GPIO4
+#define USB_CONNBIT 28
+
 #endif

src/diskio.h

@@ -55,7 +55,7 @@ DRESULT disk_read (BYTE, BYTE*, DWORD, BYTE);
 #if	_READONLY == 0
 DRESULT disk_write (BYTE, const BYTE*, DWORD, BYTE);
 #endif
-#define disk_ioctl(a,b,c) RES_OK
+DRESULT disk_ioctl (BYTE, BYTE, void*);
 
 void disk_init(void);
 

src/ff.c

@@ -3644,6 +3644,7 @@ TCHAR* f_gets (
 		*p++ = c;
 		n++;
 		if (c == '\n') break;		/* Break on EOL */
+		if (c == 0) break;		/* Break on NUL */
 	}
 	*p = 0;
 	return n ? buff : 0;			/* When no data read (eof or error), return with error. */

src/ffconf.h

@@ -36,7 +36,7 @@
 /   3: f_lseek is removed in addition to 2. */
 
 
-#define	_USE_STRFUNC	0	/* 0:Disable or 1/2:Enable */
+#define	_USE_STRFUNC	1	/* 0:Disable or 1/2:Enable */
 /* To enable string functions, set _USE_STRFUNC to 1 or 2. */
 
 

src/fileops.c

@@ -55,7 +55,7 @@ void file_open_by_filinfo(FILINFO* fno) {
   file_res = l_openfilebycluster(&fatfs, &file_handle, (TCHAR*)"", fno->clust, fno->fsize);
 }
 
-void file_open(uint8_t* filename, BYTE flags) {
+void file_open(const uint8_t* filename, BYTE flags) {
   if (disk_state == DISK_CHANGED) {
     file_reinit();
     newcard = 1;

src/fileops.h

@@ -40,7 +40,7 @@ uint16_t file_block_off, file_block_max;
 enum filestates file_status;
 
 void file_init(void);
-void file_open(uint8_t* filename, BYTE flags);
+void file_open(const uint8_t* filename, BYTE flags);
 FRESULT dir_open_by_filinfo(DIR* dir, FILINFO* fno_param);
 void file_open_by_filinfo(FILINFO* fno);
 void file_close(void);

src/filetypes.c

@@ -31,7 +31,7 @@
 #include "ff.h"
 #include "smc.h"
 #include "fileops.h"
-#include "crc32.h"
+#include "crc.h"
 #include "memory.h"
 #include "led.h"
 #include "sort.h"
@@ -60,15 +60,16 @@ uint32_t scan_dir(char* path, FILINFO* fno_param, char mkdb, uint32_t this_dir_t
   uint8_t len;
   TCHAR* fn;
   static unsigned char depth = 0;
-  static uint32_t crc;
+  static uint32_t crc, fncrc;
   static uint32_t db_tgt;
   static uint32_t next_subdir_tgt;
   static uint32_t parent_tgt;
   static uint32_t dir_end = 0;
-  static uint8_t was_empty = 0;
+/*  static uint8_t was_empty = 0;*/
   static uint16_t num_files_total = 0;
   static uint16_t num_dirs_total = 0;
   uint32_t dir_tgt;
+  uint32_t switched_dir_tgt = 0;
   uint16_t numentries;
   uint32_t dirsize;
   uint8_t pass = 0;
@@ -76,6 +77,7 @@ uint32_t scan_dir(char* path, FILINFO* fno_param, char mkdb, uint32_t this_dir_t
   char *size_units[3] = {" ", "k", "M"};
   uint32_t entry_fsize;
   uint8_t entry_unit_idx;
+  uint16_t entrycnt;
 
   dir_tgt = this_dir_tgt;
   if(depth==0) {
@@ -91,17 +93,26 @@ uint32_t scan_dir(char* path, FILINFO* fno_param, char mkdb, uint32_t this_dir_t
   fno.lfsize = 255;
   fno.lfname = (TCHAR*)file_lfn;
   numentries=0;
-  for(pass = 0; pass < 2; pass++) {
+  for(pass = 0; pass < (mkdb ? 2 : 1); pass++) {
     if(pass) {
-      num_dirs_total++;
       dirsize = 4*(numentries);
+      if(((next_subdir_tgt + dirsize + 8) & 0xff0000) > (next_subdir_tgt & 0xff0000)) {
+        printf("switchdir! old=%lX ", next_subdir_tgt + dirsize + 4);
+        next_subdir_tgt &= 0xffff0000;
+        next_subdir_tgt += 0x00010004;
+        printf("new=%lx\n", next_subdir_tgt);
+        dir_tgt &= 0xffff0000;
+        dir_tgt += 0x00010004;
+      }
+      switched_dir_tgt = dir_tgt;
       next_subdir_tgt += dirsize + 4;
       if(parent_tgt) next_subdir_tgt += 4;
       if(next_subdir_tgt > dir_end) {
         dir_end = next_subdir_tgt;
       }
-//      printf("path=%s depth=%d ptr=%lx entries=%d parent=%lx next subdir @%lx\n", path, depth, db_tgt, numentries, parent_tgt, next_subdir_tgt);
+      DBG_FS printf("path=%s depth=%d ptr=%lx entries=%d parent=%lx next subdir @%lx\n", path, depth, db_tgt, numentries, parent_tgt, next_subdir_tgt);
       if(mkdb) {
+        num_dirs_total++;
 //        printf("d=%d Saving %lx to Address %lx  [end]\n", depth, 0L, next_subdir_tgt - 4);
         sram_writelong(0L, next_subdir_tgt - 4);
       }
@@ -130,27 +141,30 @@ uint32_t scan_dir(char* path, FILINFO* fno_param, char mkdb, uint32_t this_dir_t
         dir_tgt += 4;
       }
       len = strlen((char*)path);
-      for (;;) {
+      /* scan at most DIR_FILE_MAX entries per directory */
+      for(entrycnt=0; entrycnt < DIR_FILE_MAX; entrycnt++) {
 //        toggle_read_led();
         res = f_readdir(&dir, &fno);
         if (res != FR_OK || fno.fname[0] == 0) {
           if(pass) {
-            if(!numentries) was_empty=1;
+/*            if(!numentries) was_empty=1;*/
           }
           break;
         }
         fn = *fno.lfname ? fno.lfname : fno.fname;
-        if ((*fn == '.') || !(memcmp(fn, SYS_DIR_NAME, sizeof(SYS_DIR_NAME)))) continue;
+        if ((*fn == '.') || !(strncasecmp(fn, SYS_DIR_NAME, strlen(SYS_DIR_NAME)+1))) continue;
         if (fno.fattrib & AM_DIR) {
           depth++;
           if(depth < FS_MAX_DEPTH) {
             numentries++;
-            if(pass) {
+            if(pass && mkdb) {
               path[len]='/';
               strncpy(path+len+1, (char*)fn, sizeof(fs_path)-len);
+              uint16_t pathlen = 0;
+              uint32_t old_db_tgt = 0;
               if(mkdb) {
-                uint16_t pathlen = strlen(path);
-//                printf("d=%d Saving %lx to Address %lx  [dir]\n", depth, db_tgt, dir_tgt);
+                pathlen = strlen(path);
+                DBG_FS printf("d=%d Saving %lx to Address %lx  [dir]\n", depth, db_tgt, dir_tgt);
                 /* save element:
                    - path name
                    - pointer to sub dir structure */
@@ -160,22 +174,31 @@ uint32_t scan_dir(char* path, FILINFO* fno_param, char mkdb, uint32_t this_dir_t
                   db_tgt += 0x00010000;
                   printf("new=%lx\n", db_tgt);
                 }
-//                printf("    Saving dir descriptor to %lx tgt=%lx, path=%s\n", db_tgt, next_subdir_tgt, path);
                 /* write element pointer to current dir structure */
                 sram_writelong((db_tgt-SRAM_MENU_ADDR)|((uint32_t)0x80<<24), dir_tgt);
                 /* save element:
                    - path name
-                   - pointer to sub dir structure */
-                sram_writelong((next_subdir_tgt-SRAM_MENU_ADDR), db_tgt);
-                sram_writebyte(len+1, db_tgt+sizeof(next_subdir_tgt));
-                sram_writeblock(path, db_tgt+sizeof(next_subdir_tgt)+sizeof(len), pathlen);
-                sram_writeblock("/\0", db_tgt + sizeof(next_subdir_tgt) + sizeof(len) + pathlen, 2);
+                   - pointer to sub dir structure
+                   moved below */
+                old_db_tgt = db_tgt;
                 db_tgt += sizeof(next_subdir_tgt) + sizeof(len) + pathlen + 2;
               }
               parent_tgt = this_dir_tgt;
-              scan_dir(path, &fno, mkdb, next_subdir_tgt);
+              /* scan subdir before writing current dir element to account for bank switches */
+              uint32_t corrected_subdir_tgt = scan_dir(path, &fno, mkdb, next_subdir_tgt);
+              if(mkdb) {
+                DBG_FS printf("    Saving dir descriptor to %lx tgt=%lx, path=%s\n", old_db_tgt, corrected_subdir_tgt, path);
+                sram_writelong((corrected_subdir_tgt-SRAM_MENU_ADDR), old_db_tgt);
+                sram_writebyte(len+1, old_db_tgt+sizeof(next_subdir_tgt));
+                sram_writeblock(path, old_db_tgt+sizeof(next_subdir_tgt)+sizeof(len), pathlen);
+                sram_writeblock("/\0", old_db_tgt + sizeof(next_subdir_tgt) + sizeof(len) + pathlen, 2);
+              }
               dir_tgt += 4;
-              was_empty = 0;
+/*              was_empty = 0;*/
+            } else if(!mkdb) {
+              path[len]='/';
+              strncpy(path+len+1, (char*)fn, sizeof(fs_path)-len);
+              scan_dir(path, &fno, mkdb, next_subdir_tgt);
             }
           }
           depth--;
@@ -183,10 +206,10 @@ uint32_t scan_dir(char* path, FILINFO* fno_param, char mkdb, uint32_t this_dir_t
         } else {
           SNES_FTYPE type = determine_filetype((char*)fn);
           if(type != TYPE_UNKNOWN) {
-            num_files_total++;
             numentries++;
             if(pass) {
               if(mkdb) {
+                num_files_total++;
 /*                snes_romprops_t romprops; */
                 path[len]='/';
                 strncpy(path+len+1, (char*)fn, sizeof(fs_path)-len);
@@ -194,13 +217,7 @@ uint32_t scan_dir(char* path, FILINFO* fno_param, char mkdb, uint32_t this_dir_t
                 switch(type) {
                   case TYPE_IPS:
                   case TYPE_SMC:
-/*                    file_open_by_filinfo(&fno);
-                    if(file_res){
-                      printf("ZOMG NOOOO %d\n", file_res);
-                    }
-                    smc_id(&romprops);
-                    file_close(); */
-
+                  case TYPE_SPC:
                     /* write element pointer to current dir structure */
                     DBG_FS printf("d=%d Saving %lX to Address %lX  [file %s]\n", depth, db_tgt, dir_tgt, path);
                     if((db_tgt&0xffff) > ((0x10000-(sizeof(len) + pathlen + sizeof(buf)-1 + 1))&0xffff)) {
@@ -234,29 +251,31 @@ uint32_t scan_dir(char* path, FILINFO* fno_param, char mkdb, uint32_t this_dir_t
                   default:
                    break;
                 }
-                path[len]=0;
+                path[len] = 0;
 /*              printf("%s ", path);
                 _delay_ms(30); */
               }
             } else {
               TCHAR* fn2 = fn;
+              fncrc = 0;
               while(*fn2 != 0) {
-                crc += crc32_update(crc, *((unsigned char*)fn2++));
+                fncrc += crc_xmodem_update(fncrc, *((unsigned char*)fn2++));
               }
+              crc += fncrc;
             }
           }
-/*        printf("%s/%s\n", path, fn);
-          _delay_ms(50); */
         }
       }
     } else uart_putc(0x30+res);
   }
-//  printf("db_tgt=%lx dir_end=%lx\n", db_tgt, dir_end);
+  DBG_FS printf("db_tgt=%lx dir_end=%lx\n", db_tgt, dir_end);
   sram_writelong(db_tgt, SRAM_DB_ADDR+4);
   sram_writelong(dir_end, SRAM_DB_ADDR+8);
   sram_writeshort(num_files_total, SRAM_DB_ADDR+12);
   sram_writeshort(num_dirs_total, SRAM_DB_ADDR+14);
-  return crc;
+  if(depth==0) return crc;
+  else return switched_dir_tgt;
+  return was_empty; // tricky!
 }
 
 
@@ -271,18 +290,14 @@ SNES_FTYPE determine_filetype(char* filename) {
     ) {
     return TYPE_SMC;
   }
-  if(  (!strcasecmp(ext+1, "IPS"))
+/*  if(  (!strcasecmp(ext+1, "IPS"))
      ||(!strcasecmp(ext+1, "UPS"))
     ) {
     return TYPE_IPS;
-  }
-  /* later
-  if(!strcasecmp_P(ext+1, PSTR("SRM"))) {
-    return TYPE_SRM;
-  }
-  if(!strcasecmp_P(ext+1, PSTR("SPC"))) {
-    return TYPE_SPC;
   }*/
+  if(!strcasecmp(ext+1, "SPC")) {
+    return TYPE_SPC;
+  }
   return TYPE_UNKNOWN;
 }
 

src/filetypes.h

@@ -36,7 +36,7 @@
 #include "ff.h"
 
 #define FS_MAX_DEPTH	(10)
-#define SYS_DIR_NAME	((const uint8_t*)"sd2snes")
+#define SYS_DIR_NAME	((const char*)"sd2snes")
 typedef enum {
   TYPE_UNKNOWN = 0, /* 0 */
   TYPE_SMC,         /* 1 */

src/fpga.c

@@ -98,29 +98,43 @@ void fpga_pgm(uint8_t* filename) {
   uint8_t data;
   int i;
   tick_t timeout;
+  /* open configware file */
+  file_open(filename, FA_READ);
+  if(file_res) {
+    uart_putc('?');
+    uart_putc(0x30+file_res);
+    return;
+  }
+
   do {
     i=0;
-    timeout = getticks() + 100;
+    timeout = getticks() + 1;
     fpga_set_prog_b(0);
+    while(BITBAND(PROGBREG->FIOPIN, PROGBBIT)) {
+      if(getticks() > timeout) {
+        printf("PROGB is stuck high!\n");
+        led_panic(LED_PANIC_FPGA_PROGB_STUCK);
+      }
+    }
+    timeout = getticks() + 100;
     uart_putc('P');
     fpga_set_prog_b(1);
     while(!fpga_get_initb()){
       if(getticks() > timeout) {
         printf("no response from FPGA trying to initiate configuration!\n");
-        led_panic();
+        led_panic(LED_PANIC_FPGA_NO_INITB);
       }
     };
+    timeout = getticks() + 100;
+    while(fpga_get_done()) {
+      if(getticks() > timeout) {
+        printf("DONE is stuck high!\n");
+        led_panic(LED_PANIC_FPGA_DONE_STUCK);
+      }
+    }
     LPC_GPIO2->FIOMASK1 = ~(BV(0));
     uart_putc('p');
 
-
-    /* open configware file */
-    file_open(filename, FA_READ);
-    if(file_res) {
-      uart_putc('?');
-      uart_putc(0x30+file_res);
-      return;
-    }
     uart_putc('C');
 
     for (;;) {
@@ -136,7 +150,7 @@ void fpga_pgm(uint8_t* filename) {
   } while (!fpga_get_done() && retries--);
   if(!fpga_get_done()) {
     printf("FPGA failed to configure after %d tries.\n", MAXRETRIES);
-    led_panic();
+    led_panic(LED_PANIC_FPGA_NOCONF);
   }
   printf("FPGA configured\n");
   fpga_postinit();
@@ -157,9 +171,16 @@ void fpga_rompgm() {
     while(!fpga_get_initb()){
       if(getticks() > timeout) {
         printf("no response from FPGA trying to initiate configuration!\n");
-        led_panic();
+        led_panic(LED_PANIC_FPGA_NO_INITB);
       }
     };
+    timeout = getticks() + 100;
+    while(fpga_get_done()) {
+      if(getticks() > timeout) {
+        printf("DONE is stuck high!\n");
+        led_panic(LED_PANIC_FPGA_DONE_STUCK);
+      }
+    }
     LPC_GPIO2->FIOMASK1 = ~(BV(0));
     uart_putc('p');
 
@@ -178,7 +199,7 @@ void fpga_rompgm() {
   } while (!fpga_get_done() && retries--);
   if(!fpga_get_done()) {
     printf("FPGA failed to configure after %d tries.\n", MAXRETRIES);
-    led_panic();
+    led_panic(LED_PANIC_FPGA_NOCONF);
   }
   printf("FPGA configured\n");
   fpga_postinit();

src/fpga_spi.c

@@ -1,6 +1,6 @@
 /* sd2snes - SD card based universal cartridge for the SNES
-   Copyright (C) 2009-2010 Maximilian Rehkopf <otakon@gmx.net>
-   AVR firmware portion
+   Copyright (C) 2009-2012 Maximilian Rehkopf <otakon@gmx.net>
+   uC firmware portion
 
    Inspired by and based on code from sd2iec, written by Ingo Korb et al.
    See sdcard.c|h, config.h.
@@ -143,13 +143,13 @@
 #include "sdnative.h"
 
 void fpga_spi_init(void) {
-  spi_init(SPI_SPEED_FAST);
+  spi_init();
   BITBAND(FPGA_MCU_RDY_REG->FIODIR, FPGA_MCU_RDY_BIT) = 0;
 }
 
 void set_msu_addr(uint16_t address) {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0x02);
+  FPGA_TX_BYTE(FPGA_CMD_SETADDR | FPGA_TGT_MSUBUF);
   FPGA_TX_BYTE((address>>8)&0xff);
   FPGA_TX_BYTE((address)&0xff);
   FPGA_DESELECT();
@@ -157,7 +157,7 @@ void set_msu_addr(uint16_t address) {
 
 void set_dac_addr(uint16_t address) {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0x01);
+  FPGA_TX_BYTE(FPGA_CMD_SETADDR | FPGA_TGT_DACBUF);
   FPGA_TX_BYTE((address>>8)&0xff);
   FPGA_TX_BYTE((address)&0xff);
   FPGA_DESELECT();
@@ -165,7 +165,7 @@ void set_dac_addr(uint16_t address) {
 
 void set_mcu_addr(uint32_t address) {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0x00);
+  FPGA_TX_BYTE(FPGA_CMD_SETADDR | FPGA_TGT_MEM);
   FPGA_TX_BYTE((address>>16)&0xff);
   FPGA_TX_BYTE((address>>8)&0xff);
   FPGA_TX_BYTE((address)&0xff);
@@ -174,7 +174,7 @@ void set_mcu_addr(uint32_t address) {
 
 void set_saveram_mask(uint32_t mask) {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0x20);
+  FPGA_TX_BYTE(FPGA_CMD_SETRAMMASK);
   FPGA_TX_BYTE((mask>>16)&0xff);
   FPGA_TX_BYTE((mask>>8)&0xff);
   FPGA_TX_BYTE((mask)&0xff);
@@ -183,7 +183,7 @@ void set_saveram_mask(uint32_t mask) {
 
 void set_rom_mask(uint32_t mask) {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0x10);
+  FPGA_TX_BYTE(FPGA_CMD_SETROMMASK);
   FPGA_TX_BYTE((mask>>16)&0xff);
   FPGA_TX_BYTE((mask>>8)&0xff);
   FPGA_TX_BYTE((mask)&0xff);
@@ -192,14 +192,13 @@ void set_rom_mask(uint32_t mask) {
 
 void set_mapper(uint8_t val) {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0x30 | (val & 0x0f));
+  FPGA_TX_BYTE(FPGA_CMD_SETMAPPER(val));
   FPGA_DESELECT();
 }
 
 uint8_t fpga_test() {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0xF0); /* TEST */
-  FPGA_TX_BYTE(0x00); /* dummy */
+  FPGA_TX_BYTE(FPGA_CMD_TEST);
   uint8_t result = FPGA_RX_BYTE();
   FPGA_DESELECT();
   return result;
@@ -207,8 +206,7 @@ uint8_t fpga_test() {
 
 uint16_t fpga_status() {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0xF1); /* STATUS */
-  FPGA_TX_BYTE(0x00); /* dummy */
+  FPGA_TX_BYTE(FPGA_CMD_GETSTATUS);
   uint16_t result = (FPGA_RX_BYTE()) << 8;
   result |= FPGA_RX_BYTE();
   FPGA_DESELECT();
@@ -216,65 +214,50 @@ uint16_t fpga_status() {
 }
 
 void fpga_set_sddma_range(uint16_t start, uint16_t end) {
+  printf("%s %08X -> %08X\n", __func__, start, end);
   FPGA_SELECT();
-  FPGA_TX_BYTE(0x60); /* DMA_RANGE */
+  FPGA_TX_BYTE(FPGA_CMD_SDDMA_RANGE);
   FPGA_TX_BYTE(start>>8);
   FPGA_TX_BYTE(start&0xff);
   FPGA_TX_BYTE(end>>8);
   FPGA_TX_BYTE(end&0xff);
-//if(tgt==1 && (test=FPGA_RX_BYTE()) != 0x41) printf("!!!!!!!!!!!!!!! -%02x- \n", test);
   FPGA_DESELECT();
 }
 
 void fpga_sddma(uint8_t tgt, uint8_t partial) {
-  uint32_t test = 0;
-  uint8_t status = 0;
   BITBAND(SD_CLKREG->FIODIR, SD_CLKPIN) = 0;
   FPGA_SELECT();
-  FPGA_TX_BYTE(0x40 | (tgt & 0x3) | ((partial & 1) << 2) ); /* DO DMA */
+  FPGA_TX_BYTE(FPGA_CMD_SDDMA | (tgt & 3) | (partial ? FPGA_SDDMA_PARTIAL : 0));
   FPGA_TX_BYTE(0x00); /* dummy for falling DMA_EN edge */
-//if(tgt==1 && (test=FPGA_RX_BYTE()) != 0x41) printf("!!!!!!!!!!!!!!! -%02x- \n", test);
   FPGA_DESELECT();
   FPGA_SELECT();
-  FPGA_TX_BYTE(0xF1); /* STATUS */
-  FPGA_TX_BYTE(0x00); /* dummy */
+  FPGA_TX_BYTE(FPGA_CMD_GETSTATUS);
   DBG_SD printf("FPGA DMA request sent, wait for completion...");
-  while((status=FPGA_RX_BYTE()) & 0x80) {
+  while(FPGA_RX_BYTE() & 0x80) {
     FPGA_RX_BYTE(); /* eat the 2nd status byte */
-    test++;
   }
   DBG_SD printf("...complete\n");
   FPGA_DESELECT();
-//  if(test<5)printf("loopy: %ld %02x\n", test, status);
   BITBAND(SD_CLKREG->FIODIR, SD_CLKPIN) = 1;
 }
 
-void set_dac_vol(uint8_t volume) {
-  FPGA_SELECT();
-  FPGA_TX_BYTE(0x50);
-  FPGA_TX_BYTE(volume);
-  FPGA_TX_BYTE(0x00); /* latch rise */
-  FPGA_TX_BYTE(0x00); /* latch fall */
-  FPGA_DESELECT();
-}
-
 void dac_play() {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0xe2);
+  FPGA_TX_BYTE(FPGA_CMD_DACPLAY);
   FPGA_TX_BYTE(0x00); /* latch reset */
   FPGA_DESELECT();
 }
 
 void dac_pause() {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0xe1);
+  FPGA_TX_BYTE(FPGA_CMD_DACPAUSE);
   FPGA_TX_BYTE(0x00); /* latch reset */
   FPGA_DESELECT();
 }
 
 void dac_reset() {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0xe3);
+  FPGA_TX_BYTE(FPGA_CMD_DACRESETPTR);
   FPGA_TX_BYTE(0x00); /* latch reset */
   FPGA_TX_BYTE(0x00); /* latch reset */
   FPGA_DESELECT();
@@ -282,7 +265,7 @@ void dac_reset() {
 
 void msu_reset(uint16_t address) {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0xe4);
+  FPGA_TX_BYTE(FPGA_CMD_MSUSETPTR);
   FPGA_TX_BYTE((address>>8) & 0xff); /* address hi */
   FPGA_TX_BYTE(address & 0xff);      /* address lo */
   FPGA_TX_BYTE(0x00);                /* latch reset */
@@ -292,26 +275,16 @@ void msu_reset(uint16_t address) {
 
 void set_msu_status(uint8_t set, uint8_t reset) {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0xe0);
+  FPGA_TX_BYTE(FPGA_CMD_MSUSETBITS);
   FPGA_TX_BYTE(set);
   FPGA_TX_BYTE(reset);
   FPGA_TX_BYTE(0x00); /* latch reset */
   FPGA_DESELECT();
 }
 
-uint8_t get_msu_volume() {
-  FPGA_SELECT();
-  FPGA_TX_BYTE(0xF4); /* MSU_VOLUME */
-  FPGA_TX_BYTE(0x00); /* dummy */
-  uint8_t result = FPGA_RX_BYTE();
-  FPGA_DESELECT();
-  return result;
-}
-
 uint16_t get_msu_track() {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0xF3); /* MSU_TRACK */
-  FPGA_TX_BYTE(0x00); /* dummy */
+  FPGA_TX_BYTE(FPGA_CMD_MSUGETTRACK);
   uint16_t result = (FPGA_RX_BYTE()) << 8;
   result |= FPGA_RX_BYTE();
   FPGA_DESELECT();
@@ -320,8 +293,7 @@ uint16_t get_msu_track() {
 
 uint32_t get_msu_offset() {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0xF2); /* MSU_OFFSET */
-  FPGA_TX_BYTE(0x00); /* dummy */
+  FPGA_TX_BYTE(FPGA_CMD_MSUGETADDR);
   uint32_t result = (FPGA_RX_BYTE()) << 24;
   result |= (FPGA_RX_BYTE()) << 16;
   result |= (FPGA_RX_BYTE()) << 8;
@@ -332,9 +304,8 @@ uint32_t get_msu_offset() {
 
 uint32_t get_snes_sysclk() {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0xFE); /* GET_SYSCLK */
-  FPGA_TX_BYTE(0x00); /* dummy */
-  FPGA_TX_BYTE(0x00); /* dummy */
+  FPGA_TX_BYTE(FPGA_CMD_GETSYSCLK);
+  FPGA_TX_BYTE(0x00); /* dummy (copy current sysclk count to register) */
   uint32_t result = (FPGA_RX_BYTE()) << 24;
   result |= (FPGA_RX_BYTE()) << 16;
   result |= (FPGA_RX_BYTE()) << 8;
@@ -345,7 +316,7 @@ uint32_t get_snes_sysclk() {
 
 void set_bsx_regs(uint8_t set, uint8_t reset) {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0xe6);
+  FPGA_TX_BYTE(FPGA_CMD_BSXSETBITS);
   FPGA_TX_BYTE(set);
   FPGA_TX_BYTE(reset);
   FPGA_TX_BYTE(0x00); /* latch reset */
@@ -354,7 +325,7 @@ void set_bsx_regs(uint8_t set, uint8_t reset) {
 
 void set_fpga_time(uint64_t time) {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0xe5);
+  FPGA_TX_BYTE(FPGA_CMD_RTCSET);
   FPGA_TX_BYTE((time >> 48) & 0xff);
   FPGA_TX_BYTE((time >> 40) & 0xff);
   FPGA_TX_BYTE((time >> 32) & 0xff);
@@ -368,7 +339,7 @@ void set_fpga_time(uint64_t time) {
 
 void fpga_reset_srtc_state() {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0xe7);
+  FPGA_TX_BYTE(FPGA_CMD_SRTCRESET);
   FPGA_TX_BYTE(0x00);
   FPGA_TX_BYTE(0x00);
   FPGA_DESELECT();
@@ -376,7 +347,7 @@ void fpga_reset_srtc_state() {
 
 void fpga_reset_dspx_addr() {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0xe8);
+  FPGA_TX_BYTE(FPGA_CMD_DSPRESETPTR);
   FPGA_TX_BYTE(0x00);
   FPGA_TX_BYTE(0x00);
   FPGA_DESELECT();
@@ -384,7 +355,7 @@ void fpga_reset_dspx_addr() {
 
 void fpga_write_dspx_pgm(uint32_t data) {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0xe9);
+  FPGA_TX_BYTE(FPGA_CMD_DSPWRITEPGM);
   FPGA_TX_BYTE((data>>16)&0xff);
   FPGA_TX_BYTE((data>>8)&0xff);
   FPGA_TX_BYTE((data)&0xff);
@@ -395,7 +366,7 @@ void fpga_write_dspx_pgm(uint32_t data) {
 
 void fpga_write_dspx_dat(uint16_t data) {
   FPGA_SELECT();
-  FPGA_TX_BYTE(0xea);
+  FPGA_TX_BYTE(FPGA_CMD_DSPWRITEDAT);
   FPGA_TX_BYTE((data>>8)&0xff);
   FPGA_TX_BYTE((data)&0xff);
   FPGA_TX_BYTE(0x00);
@@ -405,7 +376,7 @@ void fpga_write_dspx_dat(uint16_t data) {
 
 void fpga_dspx_reset(uint8_t reset) {
   FPGA_SELECT();
-  FPGA_TX_BYTE(reset ? 0xeb : 0xec);
+  FPGA_TX_BYTE(reset ? FPGA_CMD_DSPRESET : FPGA_CMD_DSPUNRESET);
   FPGA_TX_BYTE(0x00);
   FPGA_DESELECT();
 }
@@ -413,7 +384,7 @@ void fpga_dspx_reset(uint8_t reset) {
 void fpga_set_features(uint8_t feat) {
   printf("set features: %02x\n", feat);
   FPGA_SELECT();
-  FPGA_TX_BYTE(0xed);
+  FPGA_TX_BYTE(FPGA_CMD_SETFEATURE);
   FPGA_TX_BYTE(feat);
   FPGA_DESELECT();
 }
@@ -421,7 +392,7 @@ void fpga_set_features(uint8_t feat) {
 void fpga_set_213f(uint8_t data) {
   printf("set 213f: %d\n", data);
   FPGA_SELECT();
-  FPGA_TX_BYTE(0xee);
+  FPGA_TX_BYTE(FPGA_CMD_SET213F);
   FPGA_TX_BYTE(data);
   FPGA_DESELECT();
 }

src/fpga_spi.h

@@ -47,9 +47,6 @@
 #define FPGA_TX_BLOCK(x,y) spi_tx_block(x,y)
 #define FPGA_RX_BLOCK(x,y) spi_rx_block(x,y)
 
-#define FPGA_SPI_FAST()    spi_set_speed(SPI_SPEED_FPGA_FAST)
-#define FPGA_SPI_SLOW()    spi_set_speed(SPI_SPEED_FPGA_SLOW)
-
 #define FEAT_213F          (1 << 4)
 #define FEAT_MSU1          (1 << 3)
 #define FEAT_SRTC          (1 << 2)
@@ -60,6 +57,44 @@
 
 #define FPGA_WAIT_RDY()    do {while(BITBAND(SSP_REGS->SR, SSP_BSY)); while(!BITBAND(FPGA_MCU_RDY_REG->FIOPIN, FPGA_MCU_RDY_BIT));} while (0)
 
+/* command parameters */
+#define FPGA_MEM_AUTOINC        (0x8)
+#define FPGA_SDDMA_PARTIAL      (0x4)
+#define FPGA_TGT_MEM      (0x0)
+#define FPGA_TGT_DACBUF   (0x1)
+#define FPGA_TGT_MSUBUF   (0x2)
+
+/* commands */
+#define FPGA_CMD_SETADDR        (0x00)
+#define FPGA_CMD_SETROMMASK     (0x10)
+#define FPGA_CMD_SETRAMMASK     (0x20)
+#define FPGA_CMD_SETMAPPER(x)   (0x30 | (x & 15))
+#define FPGA_CMD_SDDMA          (0x40)
+#define FPGA_CMD_SDDMA_RANGE    (0x60)
+#define FPGA_CMD_READMEM        (0x80)
+#define FPGA_CMD_WRITEMEM       (0x90)
+#define FPGA_CMD_MSUSETBITS     (0xe0)
+#define FPGA_CMD_DACPAUSE       (0xe1)
+#define FPGA_CMD_DACPLAY        (0xe2)
+#define FPGA_CMD_DACRESETPTR    (0xe3)
+#define FPGA_CMD_MSUSETPTR      (0xe4)
+#define FPGA_CMD_RTCSET         (0xe5)
+#define FPGA_CMD_BSXSETBITS     (0xe6)
+#define FPGA_CMD_SRTCRESET      (0xe7)
+#define FPGA_CMD_DSPRESETPTR    (0xe8)
+#define FPGA_CMD_DSPWRITEPGM    (0xe9)
+#define FPGA_CMD_DSPWRITEDAT    (0xea)
+#define FPGA_CMD_DSPRESET       (0xeb)
+#define FPGA_CMD_DSPUNRESET     (0xec)
+#define FPGA_CMD_SETFEATURE     (0xed)
+#define FPGA_CMD_SET213F        (0xee)
+#define FPGA_CMD_TEST           (0xf0)
+#define FPGA_CMD_GETSTATUS      (0xf1)
+#define FPGA_CMD_MSUGETADDR     (0xf2)
+#define FPGA_CMD_MSUGETTRACK    (0xf3)
+#define FPGA_CMD_GETSYSCLK      (0xfe)
+#define FPGA_CMD_ECHO           (0xff)
+
 void fpga_spi_init(void);
 uint8_t fpga_test(void);
 uint16_t fpga_status(void);
@@ -68,7 +103,6 @@ void spi_sd(void);
 void spi_none(void);
 void set_mcu_addr(uint32_t);
 void set_dac_addr(uint16_t);
-void set_dac_vol(uint8_t);
 void dac_play(void);
 void dac_pause(void);
 void dac_reset(void);
@@ -80,7 +114,6 @@ void set_rom_mask(uint32_t);
 void set_mapper(uint8_t val);
 void fpga_sddma(uint8_t tgt, uint8_t partial);
 void fpga_set_sddma_range(uint16_t start, uint16_t end);
-uint8_t get_msu_volume(void);
 uint16_t get_msu_track(void);
 uint32_t get_msu_offset(void);
 uint32_t get_snes_sysclk(void);

src/led.c

@@ -85,14 +85,17 @@ void toggle_write_led() {
   writeled(~led_writeledstate);
 }
 
-void led_panic() {
+void led_panic(uint8_t led_states) {
+  led_std();
   while(1) {
-    LPC_GPIO2->FIODIR |= BV(4) | BV(5);
-    LPC_GPIO1->FIODIR |= BV(23);
-    delay_ms(350);
-    LPC_GPIO2->FIODIR &= ~(BV(4) | BV(5));
-    LPC_GPIO1->FIODIR &= ~BV(23);
-    delay_ms(350);
+    rdyled((led_states >> 2) & 1);
+    readled((led_states >> 1) & 1);
+    writeled(led_states & 1);
+    delay_ms(100);
+    rdyled(0);
+    readled(0);
+    writeled(0);
+    delay_ms(100);
     cli_entrycheck();
   }
 }

src/led.h

@@ -3,6 +3,12 @@
 #ifndef _LED_H
 #define _LED_H
 
+#define LED_PANIC_FPGA_PROGB_STUCK (1)
+#define LED_PANIC_FPGA_NO_INITB    (2)
+#define LED_PANIC_FPGA_DONE_STUCK  (3)
+#define LED_PANIC_FPGA_NOCONF      (4)
+#define LED_PANIC_FPGA_DEAD        (5)
+
 void readbright(uint8_t bright);
 void writebright(uint8_t bright);
 void rdybright(uint8_t bright);
@@ -13,7 +19,7 @@ void led_clkout32(uint32_t val);
 void toggle_rdy_led(void);
 void toggle_read_led(void);
 void toggle_write_led(void);
-void led_panic(void);
+void led_panic(uint8_t led_states);
 void led_pwm(void);
 void led_std(void);
 void led_init(void);

src/lpc1754.cfg

@@ -26,9 +26,9 @@ if { [info exists CPUTAPID ] } {
 }
 
 #delays on reset lines
-#if your OpenOCD version rejects "jtag_nsrst_delay" replace it with:
-#adapter_nsrst_delay 200
-jtag_nsrst_delay 200
+#if your OpenOCD version rejects "adapter_nsrst_delay" replace it with:
+#jtag_nsrst_delay 200
+adapter_nsrst_delay 200
 jtag_ntrst_delay 200
 
 # LPC2000 & LPC1700 -> SRST causes TRST
@@ -39,7 +39,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
 #jtag newtap x3s tap -irlen 6 -ircapture 0x11 -irmask 0x11 -expected-id 0x0141c093
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -chain-position $_TARGETNAME -event reset-init 0
+target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME -event reset-init 0
 
 # LPC1754 has 16kB of SRAM In the ARMv7-M "Code" area (at 0x10000000)
 # and 16K more on AHB, in the ARMv7-M "SRAM" area, (at 0x2007c000).
@@ -56,7 +56,7 @@ flash bank $_FLASHNAME lpc2000 0x0 0x20000 0 0 $_TARGETNAME \
 # Run with *real slow* clock by default since the
 # boot rom could have been playing with the PLL, so
 # we have no idea what clock the target is running at.
-jtag_khz 1000
+adapter_khz 1000
 
 $_TARGETNAME configure -event reset-init {
 	# Do not remap 0x0000-0x0020 to anything but the flash (i.e. select

src/main.c

@@ -27,6 +27,7 @@
 #include "msu1.h"
 #include "rtc.h"
 #include "sysinfo.h"
+#include "cfg.h"
 
 #define EMC0TOGGLE	(3<<4)
 #define MR0R		(1<<1)
@@ -45,11 +46,16 @@ extern volatile tick_t ticks;
 extern snes_romprops_t romprops;
 extern volatile int reset_changed;
 
-enum system_states {
-  SYS_RTC_STATUS = 0
+extern volatile cfg_t CFG;
+
+enum system_states
+{
+  SYS_RTC_STATUS = 0,
+  SYS_LAST_STATUS = 1
 };
 
-int main(void) {
+int main(void)
+{
   LPC_GPIO2->FIODIR = BV(4) | BV(5);
   LPC_GPIO1->FIODIR = BV(23) | BV(SNES_CIC_PAIR_BIT);
   BITBAND(SNES_CIC_PAIR_REG->FIOSET, SNES_CIC_PAIR_BIT) = 1;
@@ -84,7 +90,9 @@ printf("PCONP=%lx\n", LPC_SC->PCONP);
   file_init();
   cic_init(0);
 /* setup timer (fpga clk) */
+  LPC_TIM3->TCR=2;
   LPC_TIM3->CTCR=0;
+  LPC_TIM3->PR=0;
   LPC_TIM3->EMR=EMC0TOGGLE;
   LPC_TIM3->MCR=MR0R;
   LPC_TIM3->MR0=1;
@@ -115,17 +123,21 @@ printf("PCONP=%lx\n", LPC_SC->PCONP);
     /* some sanity checks */
     uint8_t card_go = 0;
     while(!card_go) {
-      if(disk_status(0) & (STA_NOINIT|STA_NODISK)) {
-	snes_bootprint("        No SD Card found!       \0");
-	while(disk_status(0) & (STA_NOINIT|STA_NODISK));
-	delay_ms(200);
+      if(disk_status(0) & (STA_NOINIT|STA_NODISK))
+      {
+        snes_bootprint("        No SD Card found!       \0");
+        while(disk_status(0) & (STA_NOINIT|STA_NODISK));
+          delay_ms(200);
       }
       file_open((uint8_t*)"/sd2snes/menu.bin", FA_READ);
-      if(file_status != FILE_OK) {
-	snes_bootprint("  /sd2snes/menu.bin not found!  \0");
-	while(disk_status(0) == RES_OK);
-      } else {
-	card_go = 1;
+      if(file_status != FILE_OK)
+      {
+        snes_bootprint("  /sd2snes/menu.bin not found!  \0");
+        while(disk_status(0) == RES_OK);
+      } 
+      else
+      {
+        card_go = 1;
       }
       file_close();
     }
@@ -138,6 +150,11 @@ printf("PCONP=%lx\n", LPC_SC->PCONP);
     readled(0);
     writeled(0);
 
+    cfg_load();
+    cfg_save();
+    sram_writebyte(cfg_is_last_game_valid(), SRAM_STATUS_ADDR+SYS_LAST_STATUS);
+    cfg_get_last_game(file_lfn);
+    sram_writeblock(strrchr((const char*)file_lfn, '/')+1, SRAM_LASTGAME_ADDR, 256);
     *fs_path=0;
     uint32_t saved_dir_id;
     get_db_id(&saved_dir_id);
@@ -170,25 +187,27 @@ printf("PCONP=%lx\n", LPC_SC->PCONP);
 	snes_bootprint("        saving database ...     \0");
 	save_sram((uint8_t*)"/sd2snes/sd2snes.db", endaddr-SRAM_DB_ADDR, SRAM_DB_ADDR);
 	save_sram((uint8_t*)"/sd2snes/sd2snes.dir", direndaddr-(SRAM_DIR_ADDR), SRAM_DIR_ADDR);
+        fpga_pgm((uint8_t*)"/sd2snes/fpga_base.bit");
 	printf("done\n");
       } else {
 	printf("saved dir id = %lx\n", saved_dir_id);
 	printf("different card, consistent db, loading db...\n");
-	load_sram((uint8_t*)"/sd2snes/sd2snes.db", SRAM_DB_ADDR);
-	load_sram((uint8_t*)"/sd2snes/sd2snes.dir", SRAM_DIR_ADDR);
+        fpga_pgm((uint8_t*)"/sd2snes/fpga_base.bit");
+	load_sram_offload((uint8_t*)"/sd2snes/sd2snes.db", SRAM_DB_ADDR);
+	load_sram_offload((uint8_t*)"/sd2snes/sd2snes.dir", SRAM_DIR_ADDR);
       }
       sram_writelong(curr_dir_id, SRAM_DIRID);
       sram_writelong(0x12345678, SRAM_SCRATCHPAD);
     } else {
       snes_bootprint("    same card, loading db...     \0");
       printf("same card, loading db...\n");
-      load_sram((uint8_t*)"/sd2snes/sd2snes.db", SRAM_DB_ADDR);
-      load_sram((uint8_t*)"/sd2snes/sd2snes.dir", SRAM_DIR_ADDR);
+      fpga_pgm((uint8_t*)"/sd2snes/fpga_base.bit");
+      load_sram_offload((uint8_t*)"/sd2snes/sd2snes.db", SRAM_DB_ADDR);
+      load_sram_offload((uint8_t*)"/sd2snes/sd2snes.dir", SRAM_DIR_ADDR);
     }
     /* cli_loop(); */
     /* load menu */
 
-    fpga_pgm((uint8_t*)"/sd2snes/fpga_base.bit");
     fpga_dspx_reset(1);
     uart_putc('(');
     load_rom((uint8_t*)"/sd2snes/menu.bin", SRAM_MENU_ADDR, 0);
@@ -203,8 +222,8 @@ printf("PCONP=%lx\n", LPC_SC->PCONP);
     if((rtc_state = rtc_isvalid()) != RTC_OK) {
       printf("RTC invalid!\n");
       sram_writebyte(0xff, SRAM_STATUS_ADDR+SYS_RTC_STATUS);
-      set_bcdtime(0x20110401000000LL);
-      set_fpga_time(0x20110401000000LL);
+      set_bcdtime(0x20120701000000LL);
+      set_fpga_time(0x20120701000000LL);
       invalidate_rtc();
     } else {
       printf("RTC valid!\n");
@@ -214,13 +233,14 @@ printf("PCONP=%lx\n", LPC_SC->PCONP);
     sram_memset(SRAM_SYSINFO_ADDR, 13*40, 0x20);
     printf("SNES GO!\n");
     snes_reset(1);
-    delay_ms(1);
+    fpga_reset_srtc_state();
+    delay_ms(SNES_RESET_PULSELEN_MS);
+    sram_writebyte(32, SRAM_CMD_ADDR);
     snes_reset(0);
 
     uint8_t cmd = 0;
     uint64_t btime = 0;
     uint32_t filesize=0;
-    sram_writebyte(32, SRAM_CMD_ADDR);
     printf("test sram\n");
     while(!sram_reliable()) cli_entrycheck();
     printf("ok\n");
@@ -238,7 +258,11 @@ printf("PCONP=%lx\n", LPC_SC->PCONP);
 	case SNES_CMD_LOADROM:
 	  get_selected_name(file_lfn);
 	  printf("Selected name: %s\n", file_lfn);
+          cfg_save_last_game(file_lfn);
+          cfg_set_last_game_valid(1);
+          cfg_save();
 	  filesize = load_rom(file_lfn, SRAM_ROM_ADDR, LOADROM_WITH_SRAM | LOADROM_WITH_RESET);
+	  printf("Filesize = %lu\n", filesize);
 	  break;
 	case SNES_CMD_SETRTC:
           /* get time from RAM */
@@ -253,15 +277,35 @@ printf("PCONP=%lx\n", LPC_SC->PCONP);
           sysinfo_loop();
           cmd=0; /* stay in menu loop */
           break;
+        case SNES_CMD_LOADSPC:
+          /* load SPC file */
+          get_selected_name(file_lfn);
+          printf("Selected name: %s\n", file_lfn);
+          filesize = load_spc(file_lfn, SRAM_SPC_DATA_ADDR, SRAM_SPC_HEADER_ADDR);
+          cmd=0; /* stay in menu loop */
+          break;
+        case SNES_CMD_RESET:
+          /* process RESET request from SNES */
+          printf("RESET requested by SNES\n");
+          snes_reset_pulse();
+          cmd=0; /* stay in menu loop */
+          break;
+        case SNES_CMD_LOADLAST:
+          cfg_get_last_game(file_lfn);
+          printf("Selected name: %s\n", file_lfn);
+          filesize = load_rom(file_lfn, SRAM_ROM_ADDR, LOADROM_WITH_SRAM | LOADROM_WITH_RESET);
+          break;
 	default:
 	  printf("unknown cmd: %d\n", cmd);
 	  cmd=0; /* unknown cmd: stay in loop */
 	  break;
       }
     }
+    printf("loaded %lu bytes\n", filesize);
     printf("cmd was %x, going to snes main loop\n", cmd);
 
-    if(romprops.has_msu1 && msu1_loop()) {
+    if(romprops.has_msu1) {
+      while(!msu1_loop());
       prepare_reset();
       continue;
     }
@@ -269,30 +313,38 @@ printf("PCONP=%lx\n", LPC_SC->PCONP);
     cmd=0;
     uint8_t snes_reset_prev=0, snes_reset_now=0, snes_reset_state=0;
     uint16_t reset_count=0;
-    while(fpga_test() == FPGA_TEST_TOKEN) {
+    while(fpga_test() == FPGA_TEST_TOKEN)
+    {
       cli_entrycheck();
       sleep_ms(250);
       sram_reliable();
       printf("%s ", get_cic_statename(get_cic_state()));
-      if(reset_changed) {
+      if(reset_changed)
+      {
         printf("reset\n");
         reset_changed = 0;
         fpga_reset_srtc_state();
       }
-      snes_reset_now=get_snes_reset();
-      if(snes_reset_now) {
-	if(!snes_reset_prev) {
-	  printf("RESET BUTTON DOWN\n");
-	  snes_reset_state=1;
-	  reset_count=0;
-	}
-      } else {
-	if(snes_reset_prev) {
-	  printf("RESET BUTTON UP\n");
-	  snes_reset_state=0;
-	}
+      snes_reset_now = get_snes_reset();
+      if (snes_reset_now)
+      {
+        if (!snes_reset_prev)
+        {
+          printf("RESET BUTTON DOWN\n");
+          snes_reset_state = 1;
+          reset_count = 0;
+        }
+      } 
+      else
+      {
+        if (snes_reset_prev)
+        {
+          printf("RESET BUTTON UP\n");
+          snes_reset_state = 0;
+        }
       }
-      if(snes_reset_state) {
+      if (snes_reset_state)
+      {
 	reset_count++;
       } else {
 	sram_reliable();
@@ -307,7 +359,7 @@ printf("PCONP=%lx\n", LPC_SC->PCONP);
     }
     /* fpga test fail: panic */
     if(fpga_test() != FPGA_TEST_TOKEN){
-      led_panic();
+      led_panic(LED_PANIC_FPGA_DEAD);
     }
     /* else reset */
   }

src/memory.c

@@ -54,11 +54,12 @@ void sram_hexdump(uint32_t addr, uint32_t len) {
   uint32_t ptr;
   for(ptr=0; ptr < len; ptr += 16) {
     sram_readblock((void*)buf, ptr+addr, 16);
-    uart_trace(buf, 0, 16);
+    uart_trace(buf, 0, 16, addr);
   }
 }
 
 void sram_writebyte(uint8_t val, uint32_t addr) {
+  printf("WriteB %8Xh @%08lXh\n", val, addr);
   set_mcu_addr(addr);
   FPGA_SELECT();
   FPGA_TX_BYTE(0x98); /* WRITE */
@@ -74,10 +75,12 @@ uint8_t sram_readbyte(uint32_t addr) {
   FPGA_WAIT_RDY();
   uint8_t val = FPGA_RX_BYTE();
   FPGA_DESELECT();
+  //printf(" ReadB %8Xh @%08lXh\n", val, addr);
   return val;
 }
 
 void sram_writeshort(uint16_t val, uint32_t addr) {
+  printf("WriteS %8Xh @%08lXh\n", val, addr);
   set_mcu_addr(addr);
   FPGA_SELECT();
   FPGA_TX_BYTE(0x98); /* WRITE */
@@ -89,6 +92,7 @@ void sram_writeshort(uint16_t val, uint32_t addr) {
 }
 
 void sram_writelong(uint32_t val, uint32_t addr) {
+  printf("WriteL %8lXh @%08lXh\n", val, addr);
   set_mcu_addr(addr);
   FPGA_SELECT();
   FPGA_TX_BYTE(0x98); /* WRITE */
@@ -112,6 +116,7 @@ uint16_t sram_readshort(uint32_t addr) {
   FPGA_WAIT_RDY();
   val |= ((uint32_t)FPGA_RX_BYTE()<<8);
   FPGA_DESELECT();
+  //printf(" ReadS %8lXh @%08lXh\n", val, addr);
   return val;
 }
 
@@ -128,6 +133,7 @@ uint32_t sram_readlong(uint32_t addr) {
   FPGA_WAIT_RDY();
   val |= ((uint32_t)FPGA_RX_BYTE()<<24);
   FPGA_DESELECT();
+  //printf(" ReadL %8lXh @%08lXh\n", val, addr);
   return val;
 }
 
@@ -163,7 +169,21 @@ void sram_readblock(void* buf, uint32_t addr, uint16_t size) {
   FPGA_DESELECT();
 }
 
+void sram_readstrn(void* buf, uint32_t addr, uint16_t size) {
+  uint16_t count=size;
+  uint8_t* tgt = buf;
+  set_mcu_addr(addr);
+  FPGA_SELECT();
+  FPGA_TX_BYTE(0x88);	/* READ */
+  while(count--) {
+    FPGA_WAIT_RDY();
+    if(!(*(tgt++) = FPGA_RX_BYTE())) break;
+  }
+  FPGA_DESELECT();
+}
+
 void sram_writeblock(void* buf, uint32_t addr, uint16_t size) {
+  printf("WriteZ %08lX -> %08lX [%d]\n", addr, addr+size, size);
   uint16_t count=size;
   uint8_t* src = buf;
   set_mcu_addr(addr);
@@ -178,7 +198,7 @@ void sram_writeblock(void* buf, uint32_t addr, uint16_t size) {
 
 uint32_t load_rom(uint8_t* filename, uint32_t base_addr, uint8_t flags) {
   UINT bytes_read;
-  DWORD filesize;
+  DWORD filesize, read_size = 0;
   UINT count=0;
   tick_t ticksstart, ticks_total=0;
   ticksstart=getticks();
@@ -197,19 +217,23 @@ uint32_t load_rom(uint8_t* filename, uint32_t base_addr, uint8_t flags) {
     printf("reconfigure FPGA with %s...\n", romprops.fpga_conf);
     fpga_pgm((uint8_t*)romprops.fpga_conf);
   }
-  set_mcu_addr(base_addr);
+  set_mcu_addr(base_addr + romprops.load_address);
   file_open(filename, FA_READ);
+  ff_sd_offload=1;
+  sd_offload_tgt=0;
   f_lseek(&file_handle, romprops.offset);
   for(;;) {
     ff_sd_offload=1;
     sd_offload_tgt=0;
     bytes_read = file_read();
+    read_size += bytes_read;
     if (file_res || !bytes_read) break;
     if(!(count++ % 512)) {
       uart_putc('.');
     }
   }
   file_close();
+  printf("Read %ld [%08lX] bytes...\n", read_size, read_size);
   set_mapper(romprops.mapper_id);
   printf("rom header map: %02x; mapper id: %d\n", romprops.header.map, romprops.mapper_id);
   ticks_total=getticks()-ticksstart;
@@ -218,6 +242,8 @@ uint32_t load_rom(uint8_t* filename, uint32_t base_addr, uint8_t flags) {
     printf("BSX Flash cart image\n");
     printf("attempting to load BSX BIOS /sd2snes/bsxbios.bin...\n");
     load_sram_offload((uint8_t*)"/sd2snes/bsxbios.bin", 0x800000);
+    printf("attempting to load BS data file /sd2snes/bsxpage.bin...\n");
+    load_sram_offload((uint8_t*)"/sd2snes/bsxpage.bin", 0x900000);
     printf("Type: %02x\n", romprops.header.destcode);
     set_bsx_regs(0xc0, 0x3f);
     uint16_t rombase;
@@ -257,6 +283,9 @@ uint32_t load_rom(uint8_t* filename, uint32_t base_addr, uint8_t flags) {
     rammask = romprops.ramsize_bytes - 1;
   }
   rommask = romprops.romsize_bytes - 1;
+  if (rommask >= SRAM_SAVE_ADDR)
+    rommask = SRAM_SAVE_ADDR - 1;
+  
   printf("ramsize=%x rammask=%lx\nromsize=%x rommask=%lx\n", romprops.header.ramsize, rammask, romprops.header.romsize, rommask);
   set_saveram_mask(rammask);
   set_rom_mask(rommask);
@@ -288,15 +317,90 @@ uint32_t load_rom(uint8_t* filename, uint32_t base_addr, uint8_t flags) {
 
   if(flags & LOADROM_WITH_RESET) {
     fpga_dspx_reset(1);
-    snes_reset(1);
-    delay_ms(10);
-    snes_reset(0);
+    snes_reset_pulse();
     fpga_dspx_reset(0);
   }
 
   return (uint32_t)filesize;
 }
 
+uint32_t load_spc(uint8_t* filename, uint32_t spc_data_addr, uint32_t spc_header_addr) {
+  DWORD filesize;
+  UINT bytes_read;
+  uint8_t data;
+  UINT j;
+
+  printf("%s\n", filename);
+
+  file_open(filename, FA_READ); /* Open SPC file */
+  if(file_res) return 0;
+  filesize = file_handle.fsize;
+  if (filesize < 65920) { /*  At this point, we care about filesize only */
+    file_close();         /* since SNES decides if it is an SPC file */
+    sram_writebyte(0, spc_header_addr);	/* If file is too small, destroy previous SPC header */
+    return 0;
+  }
+
+  set_mcu_addr(spc_data_addr);
+  f_lseek(&file_handle, 0x100L); /* Load 64K data segment */
+
+  for(;;) {
+    bytes_read = file_read();
+    if (file_res || !bytes_read) break;
+    FPGA_SELECT();
+    FPGA_TX_BYTE(0x98);
+    for(j=0; j<bytes_read; j++) {
+      FPGA_TX_BYTE(file_buf[j]);
+      FPGA_WAIT_RDY();
+    }
+    FPGA_DESELECT();
+  }
+
+  file_close();
+  file_open(filename, FA_READ); /* Reopen SPC file to reset file_getc state*/
+
+  set_mcu_addr(spc_header_addr);
+  f_lseek(&file_handle, 0x0L); /* Load 256 bytes header */
+
+  FPGA_SELECT();
+  FPGA_TX_BYTE(0x98);
+  for (j = 0; j < 256; j++) {
+    data = file_getc();
+    FPGA_TX_BYTE(data);
+    FPGA_WAIT_RDY();
+  }
+  FPGA_DESELECT();
+
+  file_close();
+  file_open(filename, FA_READ); /* Reopen SPC file to reset file_getc state*/
+
+  set_mcu_addr(spc_header_addr+0x100);
+  f_lseek(&file_handle, 0x10100L); /* Load 128 DSP registers */
+
+  FPGA_SELECT();
+  FPGA_TX_BYTE(0x98);
+  for (j = 0; j < 128; j++) {
+    data = file_getc();
+    FPGA_TX_BYTE(data);
+    FPGA_WAIT_RDY();
+  }
+  FPGA_DESELECT();
+  file_close(); /* Done ! */
+
+  /* clear echo buffer to avoid artifacts */
+  uint8_t esa = sram_readbyte(spc_header_addr+0x100+0x6d);
+  uint8_t edl = sram_readbyte(spc_header_addr+0x100+0x7d);
+  uint8_t flg = sram_readbyte(spc_header_addr+0x100+0x6c);
+  if(!(flg & 0x20) && (edl & 0x0f)) {
+    int echo_start = esa << 8;
+    int echo_length = (edl & 0x0f) << 11;
+    printf("clearing echo buffer %04x-%04x...\n", echo_start, echo_start+echo_length-1);
+    sram_memset(spc_data_addr+echo_start, echo_length, 0);
+  }
+
+  return (uint32_t)filesize;
+}
+
 uint32_t load_sram_offload(uint8_t* filename, uint32_t base_addr) {
   set_mcu_addr(base_addr);
   UINT bytes_read;
@@ -381,7 +485,6 @@ uint32_t load_bootrle(uint32_t base_addr) {
 
 void save_sram(uint8_t* filename, uint32_t sram_size, uint32_t base_addr) {
   uint32_t count = 0;
-  uint32_t num = 0;
 
   FPGA_DESELECT();
   file_open(filename, FA_CREATE_ALWAYS | FA_WRITE);
@@ -398,7 +501,7 @@ void save_sram(uint8_t* filename, uint32_t sram_size, uint32_t base_addr) {
       count++;
     }
     FPGA_DESELECT();
-    num = file_write();
+    file_write();
     if(file_res) {
       uart_putc(0x30+file_res);
     }
@@ -445,9 +548,9 @@ uint8_t sram_reliable() {
     val=sram_readlong(SRAM_SCRATCHPAD);
     if(val==0x12345678) {
       score++;
-    } else {
-      printf("i=%d val=%08lX\n", i, val);
-    }
+    } //else {
+      //printf("i=%d val=%08lX\n", i, val);
+    //}
   }
   if(score<SRAM_RELIABILITY_SCORE) {
     result = 0;
@@ -502,7 +605,6 @@ uint64_t sram_gettime(uint32_t base_addr) {
 
 void load_dspx(const uint8_t *filename, uint8_t coretype) {
   UINT bytes_read;
-  DWORD filesize;
   uint16_t word_cnt;
   uint8_t wordsize_cnt = 0;
   uint16_t sector_remaining = 0;
@@ -526,7 +628,6 @@ void load_dspx(const uint8_t *filename, uint8_t coretype) {
   }
 
   file_open((uint8_t*)filename, FA_READ);
-  filesize = file_handle.fsize;
   if(file_res) {
     printf("Could not read %s: error %d\n", filename, file_res);
     return;

src/memory.h

@@ -30,25 +30,33 @@
 #include <arm/NXP/LPC17xx/LPC17xx.h>
 #include "smc.h"
 
-#define SRAM_ROM_ADDR           (0x000000L)
-#define SRAM_SAVE_ADDR          (0xE00000L)
+#define MASK_BITS                (0x000000)
 
-#define SRAM_MENU_ADDR          (0xE00000L)
-#define SRAM_DB_ADDR            (0xE40000L)
-#define SRAM_DIR_ADDR           (0xE10000L)
-#define SRAM_CMD_ADDR           (0xFF1000L)
-#define SRAM_PARAM_ADDR         (0xFF1004L)
-#define SRAM_STATUS_ADDR        (0xFF1100L)
-#define SRAM_SYSINFO_ADDR       (0xFF1110L)
-#define SRAM_MENU_SAVE_ADDR     (0xFF0000L)
-#define SRAM_SCRATCHPAD         (0xFFFF00L)
-#define SRAM_DIRID              (0xFFFFF0L)
+#define SRAM_ROM_ADDR           ((0x000000L) & ~MASK_BITS)
+#define SRAM_SAVE_ADDR          ((0x600000L) & ~MASK_BITS)
+
+#define SRAM_MENU_ADDR          ((0x500000L) & ~MASK_BITS)
+#define SRAM_DIR_ADDR           ((0x510000L) & ~MASK_BITS)
+#define SRAM_DB_ADDR            ((0x580000L) & ~MASK_BITS)
+
+#define SRAM_SPC_DATA_ADDR      ((0x7D0000L) & ~MASK_BITS)
+#define SRAM_SPC_HEADER_ADDR    ((0x7E0000L) & ~MASK_BITS)
+
+#define SRAM_MENU_SAVE_ADDR     ((0x7F0000L) & ~MASK_BITS)
+#define SRAM_CMD_ADDR           ((0x7F1000L) & ~MASK_BITS)
+#define SRAM_PARAM_ADDR         ((0x7F1004L) & ~MASK_BITS)
+#define SRAM_STATUS_ADDR        ((0x7F1100L) & ~MASK_BITS)
+#define SRAM_SYSINFO_ADDR       ((0x7F1200L) & ~MASK_BITS)
+#define SRAM_LASTGAME_ADDR      ((0x7F1420L) & ~MASK_BITS)
+#define SRAM_SCRATCHPAD         ((0x7FFF00L) & ~MASK_BITS)
+#define SRAM_DIRID              ((0x7FFFF0L) & ~MASK_BITS)
 #define SRAM_RELIABILITY_SCORE  (0x100)
 
 #define LOADROM_WITH_SRAM	(1)
 #define LOADROM_WITH_RESET	(2)
 
 uint32_t load_rom(uint8_t* filename, uint32_t base_addr, uint8_t flags);
+uint32_t load_spc(uint8_t* filename, uint32_t spc_data_addr, uint32_t spc_header_addr);
 uint32_t load_sram(uint8_t* filename, uint32_t base_addr);
 uint32_t load_sram_offload(uint8_t* filename, uint32_t base_addr);
 uint32_t load_sram_rle(uint8_t* filename, uint32_t base_addr);
@@ -62,6 +70,7 @@ void sram_writebyte(uint8_t val, uint32_t addr);
 void sram_writeshort(uint16_t val, uint32_t addr);
 void sram_writelong(uint32_t val, uint32_t addr);
 void sram_readblock(void* buf, uint32_t addr, uint16_t size);
+void sram_readstrn(void* buf, uint32_t addr, uint16_t size);
 void sram_readlongblock(uint32_t* buf, uint32_t addr, uint16_t count);
 void sram_writeblock(void* buf, uint32_t addr, uint16_t size);
 void save_sram(uint8_t* filename, uint32_t sram_size, uint32_t base_addr);

src/msu1.c

@@ -13,25 +13,132 @@
 #include "smc.h"
 
 FIL msufile;
+FRESULT msu_res;
 DWORD msu_cltbl[CLTBL_SIZE] IN_AHBRAM;
 DWORD pcm_cltbl[CLTBL_SIZE] IN_AHBRAM;
+UINT msu_audio_bytes_read = 1024;
+UINT msu_data_bytes_read = 1;
 
 extern snes_romprops_t romprops;
+uint32_t msu_loop_point = 0;
+uint32_t msu_page1_start = 0x0000;
+uint32_t msu_page2_start = 0x2000;
+uint32_t msu_page_size = 0x2000;
+uint16_t fpga_status_prev;
+uint16_t fpga_status_now;
+
+enum msu_reset_state { MSU_RESET_NONE = 0, MSU_RESET_SHORT, MSU_RESET_LONG };
+
+void prepare_audio_track(uint16_t msu_track) {
+  /* open file, fill buffer */
+  char suffix[11];
+  f_close(&file_handle);
+  snprintf(suffix, sizeof(suffix), "-%d.pcm", msu_track);
+  strcpy((char*)file_buf, (char*)file_lfn);
+  strcpy(strrchr((char*)file_buf, (int)'.'), suffix);
+  DBG_MSU1 printf("filename: %s\n", file_buf);
+  if(f_open(&file_handle, (const TCHAR*)file_buf, FA_READ) == FR_OK) {
+    file_handle.cltbl = pcm_cltbl;
+    pcm_cltbl[0] = CLTBL_SIZE;
+    f_lseek(&file_handle, CREATE_LINKMAP);
+    f_lseek(&file_handle, 4L);
+    f_read(&file_handle, &msu_loop_point, 4, &msu_audio_bytes_read);
+    DBG_MSU1 printf("loop point: %ld samples\n", msu_loop_point);
+    ff_sd_offload=1;
+    sd_offload_tgt=1;
+    f_lseek(&file_handle, 8L);
+    set_dac_addr(0);
+    dac_pause();
+    dac_reset();
+    ff_sd_offload=1;
+    sd_offload_tgt=1;
+    f_read(&file_handle, file_buf, MSU_DAC_BUFSIZE, &msu_audio_bytes_read);
+    /* clear busy bit */
+    set_msu_status(0x00, 0x28); /* set no bits, reset audio_busy + audio_error */
+  } else {
+    f_close(&file_handle);
+    set_msu_status(0x08, 0x20); /* reset audio_busy, set audio_error */
+  }
+}
+
+void prepare_data(uint32_t msu_offset) {
+  DBG_MSU1 printf("Data requested! Offset=%08lx page1=%08lx page2=%08lx\n", msu_offset, msu_page1_start, msu_page2_start);
+  if(   ((msu_offset < msu_page1_start)
+     || (msu_offset >= msu_page1_start + msu_page_size))
+     && ((msu_offset < msu_page2_start)
+     || (msu_offset >= msu_page2_start + msu_page_size))) {
+    DBG_MSU1 printf("offset %08lx out of range (%08lx-%08lx, %08lx-%08lx), reload\n", msu_offset, msu_page1_start,
+           msu_page1_start+msu_page_size-1, msu_page2_start, msu_page2_start+msu_page_size-1);
+    /* "cache miss" */
+    /* fill buffer */
+    set_msu_addr(0x0);
+    sd_offload_tgt=2;
+    ff_sd_offload=1;
+    msu_res = f_lseek(&msufile, msu_offset);
+    DBG_MSU1 printf("seek to %08lx, res = %d\n", msu_offset, msu_res);
+    sd_offload_tgt=2;
+    ff_sd_offload=1;
+    msu_res = f_read(&msufile, file_buf, 16384, &msu_data_bytes_read);
+    DBG_MSU1 printf("read res = %d\n", msu_res);
+    DBG_MSU1 printf("read %d bytes\n", msu_data_bytes_read);
+    msu_reset(0x0);
+    msu_page1_start = msu_offset;
+    msu_page2_start = msu_offset + msu_page_size;
+  } else {
+    if (msu_offset >= msu_page1_start && msu_offset <= msu_page1_start + msu_page_size) {
+      msu_reset(0x0000 + msu_offset - msu_page1_start);
+      DBG_MSU1 printf("inside page1, new offset: %08lx\n", 0x0000 + msu_offset-msu_page1_start);
+      if(!(msu_page2_start == msu_page1_start + msu_page_size)) {
+        set_msu_addr(0x2000);
+        sd_offload_tgt=2;
+        ff_sd_offload=1;
+        f_read(&msufile, file_buf, 8192, &msu_data_bytes_read);
+        DBG_MSU1 printf("next page dirty (was: %08lx), loaded page2 (start now: ", msu_page2_start);
+        msu_page2_start = msu_page1_start + msu_page_size;
+        DBG_MSU1 printf("%08lx)\n", msu_page2_start);
+      }
+    } else if (msu_offset >= msu_page2_start && msu_offset <= msu_page2_start + msu_page_size) {
+      DBG_MSU1 printf("inside page2, new offset: %08lx\n", 0x2000 + msu_offset-msu_page2_start);
+      msu_reset(0x2000 + msu_offset - msu_page2_start);
+      if(!(msu_page1_start == msu_page2_start + msu_page_size)) {
+        set_msu_addr(0x0);
+        sd_offload_tgt=2;
+        ff_sd_offload=1;
+        f_read(&msufile, file_buf, 8192, &msu_data_bytes_read);
+        DBG_MSU1 printf("next page dirty (was: %08lx), loaded page1 (start now: ", msu_page1_start);
+        msu_page1_start = msu_page2_start + msu_page_size;
+        DBG_MSU1 printf("%08lx)\n", msu_page1_start);
+      }
+    } else printf("!!!WATWATWAT!!!\n");
+  }
+  /* clear bank bit to mask bank reset artifact */
+  fpga_status_now &= ~0x2000;
+  fpga_status_prev &= ~0x2000;
+  /* clear busy bit */
+  set_msu_status(0x00, 0x10);
+}
 
 int msu1_check_reset(void) {
   static tick_t rising_ticks;
 
   static uint8_t resbutton=0, resbutton_prev=0;
+  int result = MSU_RESET_NONE;
   resbutton = get_snes_reset();
   if(resbutton && !resbutton_prev) { /* push */
     rising_ticks = getticks();
   } else if(resbutton && resbutton_prev) { /* hold */
     if(getticks() > rising_ticks + 99) {
-      return 1;
+      result = MSU_RESET_LONG;
     }
+  } else if(!resbutton && resbutton_prev) { /* release */
+    if(getticks() < rising_ticks + 99) {
+      result = MSU_RESET_SHORT;
+    }
+  } else {
+    result = MSU_RESET_NONE;
   }
   resbutton_prev = resbutton;
-  return 0;
+  return result;
 }
 
 int msu1_check(uint8_t* filename) {
@@ -54,23 +161,28 @@ int msu1_check(uint8_t* filename) {
 
 int msu1_loop() {
 /* it is assumed that the MSU file is already opened by calling msu1_check(). */
-  UINT bytes_read = 1024;
-  UINT bytes_read2 = 1;
-  FRESULT res;
-  set_dac_vol(0x00);
   while(fpga_status() & 0x4000);
-  uint16_t fpga_status_prev = fpga_status();
-  uint16_t fpga_status_now = fpga_status();
   uint16_t dac_addr = 0;
   uint16_t msu_addr = 0;
   uint8_t msu_repeat = 0;
   uint16_t msu_track = 0;
   uint32_t msu_offset = 0;
-  uint32_t msu_loop_point = 0;
+  fpga_status_prev = fpga_status();
+  fpga_status_now = fpga_status();
+  int msu_res;
 
-  uint32_t msu_page1_start = 0x0000;
-  uint32_t msu_page2_start = 0x2000;
-  uint32_t msu_page_size = 0x2000;
+/*  set_msu_addr(0x0);
+  msu_reset(0x0);
+  ff_sd_offload=1;
+  sd_offload_tgt=2;
+  f_lseek(&msufile, 0L);
+  ff_sd_offload=1;
+  sd_offload_tgt=2;
+  f_read(&msufile, file_buf, 16384, &msu_data_bytes_read);
+*/
+  set_dac_addr(dac_addr);
+  dac_pause();
+  dac_reset();
 
   set_msu_addr(0x0);
   msu_reset(0x0);
@@ -79,190 +191,110 @@ int msu1_loop() {
   f_lseek(&msufile, 0L);
   ff_sd_offload=1;
   sd_offload_tgt=2;
-  f_read(&msufile, file_buf, 16384, &bytes_read2);
+  f_read(&msufile, file_buf, 16384, &msu_data_bytes_read);
 
-  set_dac_addr(dac_addr);
-  dac_pause();
-  dac_reset();
+  prepare_audio_track(0);
+  prepare_data(0);
 /* audio_start, data_start, 0, audio_ctrl[1:0], ctrl_start */
-  while(1){
+  while((msu_res = msu1_check_reset()) == MSU_RESET_NONE){
     cli_entrycheck();
     fpga_status_now = fpga_status();
 
     /* Data buffer refill */
     if((fpga_status_now & 0x2000) != (fpga_status_prev & 0x2000)) {
       DBG_MSU1 printf("data\n");
-      uint8_t pageno = 0;
       if(fpga_status_now & 0x2000) {
-	msu_addr = 0x0;
-	msu_page1_start = msu_page2_start + msu_page_size;
-	pageno = 1;
+        msu_addr = 0x0;
+        msu_page1_start = msu_page2_start + msu_page_size;
       } else {
-	msu_addr = 0x2000;
-	msu_page2_start = msu_page1_start + msu_page_size;
-	pageno = 2;
+        msu_addr = 0x2000;
+        msu_page2_start = msu_page1_start + msu_page_size;
       }
       set_msu_addr(msu_addr);
       sd_offload_tgt=2;
       ff_sd_offload=1;
-      res = f_read(&msufile, file_buf, 8192, &bytes_read2);
-      DBG_MSU1 printf("data buffer refilled. res=%d page1=%08lx page2=%08lx\n", res, msu_page1_start, msu_page2_start);
+      msu_res = f_read(&msufile, file_buf, 8192, &msu_data_bytes_read);
+      DBG_MSU1 printf("data buffer refilled. page=%d res=%d page1=%08lx page2=%08lx\n", pageno, msu_res, msu_page1_start, msu_page2_start);
     }
 
     /* Audio buffer refill */
     if((fpga_status_now & 0x4000) != (fpga_status_prev & 0x4000)) {
       if(fpga_status_now & 0x4000) {
-	dac_addr = 0;
+        dac_addr = 0;
       } else {
-	dac_addr = MSU_DAC_BUFSIZE/2;
+        dac_addr = MSU_DAC_BUFSIZE/2;
       }
       set_dac_addr(dac_addr);
       sd_offload_tgt=1;
       ff_sd_offload=1;
-      f_read(&file_handle, file_buf, MSU_DAC_BUFSIZE/2, &bytes_read);
+      f_read(&file_handle, file_buf, MSU_DAC_BUFSIZE/2, &msu_audio_bytes_read);
     }
 
     if(fpga_status_now & 0x0020) {
-      char suffix[11];
-
       /* get trackno */
       msu_track = get_msu_track();
       DBG_MSU1 printf("Audio requested! Track=%d\n", msu_track);
 
-      /* open file, fill buffer */
-      f_close(&file_handle);
-      snprintf(suffix, sizeof(suffix), "-%d.pcm", msu_track);
-      strcpy((char*)file_buf, (char*)file_lfn);
-      strcpy(strrchr((char*)file_buf, (int)'.'), suffix);
-      DBG_MSU1 printf("filename: %s\n", file_buf);
-      f_open(&file_handle, (const TCHAR*)file_buf, FA_READ);
-      file_handle.cltbl = pcm_cltbl;
-      pcm_cltbl[0] = CLTBL_SIZE;
-      f_lseek(&file_handle, CREATE_LINKMAP);
-      f_lseek(&file_handle, 4L);
-      f_read(&file_handle, &msu_loop_point, 4, &bytes_read);
-      DBG_MSU1 printf("loop point: %ld samples\n", msu_loop_point);
-      ff_sd_offload=1;
-      sd_offload_tgt=1;
-      f_lseek(&file_handle, 8L);
-      set_dac_addr(0);
-      dac_pause();
-      dac_reset();
-      ff_sd_offload=1;
-      sd_offload_tgt=1;
-      f_read(&file_handle, file_buf, MSU_DAC_BUFSIZE, &bytes_read);
-
-      /* clear busy bit */
-      set_msu_status(0x00, 0x20); /* set no bits, reset bit 5 */
+      prepare_audio_track(msu_track);
     }
 
     if(fpga_status_now & 0x0010) {
       /* get address */
       msu_offset=get_msu_offset();
-      DBG_MSU1 printf("Data requested! Offset=%08lx page1=%08lx page2=%08lx\n", msu_offset, msu_page1_start, msu_page2_start);
-      if(   ((msu_offset < msu_page1_start)
-	 || (msu_offset >= msu_page1_start + msu_page_size))
-	 && ((msu_offset < msu_page2_start)
-	 || (msu_offset >= msu_page2_start + msu_page_size))) {
-	DBG_MSU1 printf("offset %08lx out of range (%08lx-%08lx, %08lx-%08lx), reload\n", msu_offset, msu_page1_start,
-	       msu_page1_start+msu_page_size-1, msu_page2_start, msu_page2_start+msu_page_size-1);
-	/* "cache miss" */
-	/* fill buffer */
-	set_msu_addr(0x0);
-	sd_offload_tgt=2;
-	ff_sd_offload=1;
-        res = f_lseek(&msufile, msu_offset);
-	DBG_MSU1 printf("seek to %08lx, res = %d\n", msu_offset, res);
-	sd_offload_tgt=2;
-	ff_sd_offload=1;
-
-        res = f_read(&msufile, file_buf, 16384, &bytes_read2);
-	DBG_MSU1 printf("read res = %d\n", res);
-	DBG_MSU1 printf("read %d bytes\n", bytes_read2);
-	msu_reset(0x0);
-	msu_page1_start = msu_offset;
-	msu_page2_start = msu_offset + msu_page_size;
-      } else {
-	if (msu_offset >= msu_page1_start && msu_offset <= msu_page1_start + msu_page_size) {
-	  msu_reset(0x0000 + msu_offset - msu_page1_start);
-	  DBG_MSU1 printf("inside page1, new offset: %08lx\n", 0x0000 + msu_offset-msu_page1_start);
-	  if(!(msu_page2_start == msu_page1_start + msu_page_size)) {
-	    set_msu_addr(0x2000);
-	    sd_offload_tgt=2;
-	    ff_sd_offload=1;
-	    f_read(&msufile, file_buf, 8192, &bytes_read2);
-	    DBG_MSU1 printf("next page dirty (was: %08lx), loaded page2 (start now: ", msu_page2_start);
-	    msu_page2_start = msu_page1_start + msu_page_size;
-	    DBG_MSU1 printf("%08lx)\n", msu_page2_start);
-	  }
-	} else if (msu_offset >= msu_page2_start && msu_offset <= msu_page2_start + msu_page_size) {
-	  DBG_MSU1 printf("inside page2, new offset: %08lx\n", 0x2000 + msu_offset-msu_page2_start);
-	  msu_reset(0x2000 + msu_offset - msu_page2_start);
-	  if(!(msu_page1_start == msu_page2_start + msu_page_size)) {
-	    set_msu_addr(0x0);
-	    sd_offload_tgt=2;
-	    ff_sd_offload=1;
-	    f_read(&msufile, file_buf, 8192, &bytes_read2);
-	    DBG_MSU1 printf("next page dirty (was: %08lx), loaded page1 (start now: ", msu_page1_start);
-	    msu_page1_start = msu_page2_start + msu_page_size;
-	    DBG_MSU1 printf("%08lx)\n", msu_page1_start);
-	  }
-	} else printf("!!!WATWATWAT!!!\n");
-      }
-      /* clear bank bit to mask bank reset artifact */
-      fpga_status_now &= ~0x2000;
-      fpga_status_prev &= ~0x2000;
-      /* clear busy bit */
-      set_msu_status(0x00, 0x10);
+      prepare_data(msu_offset);
     }
 
     if(fpga_status_now & 0x0001) {
       if(fpga_status_now & 0x0004) {
-	msu_repeat = 1;
-	set_msu_status(0x04, 0x01); /* set bit 2, reset bit 0 */
-	DBG_MSU1 printf("Repeat set!\n");
+        msu_repeat = 1;
+        set_msu_status(0x04, 0x01); /* set bit 2, reset bit 0 */
+        DBG_MSU1 printf("Repeat set!\n");
       } else {
-	msu_repeat = 0;
-	set_msu_status(0x00, 0x05); /* set no bits, reset bit 0+2 */
-	DBG_MSU1 printf("Repeat clear!\n");
+        msu_repeat = 0;
+        set_msu_status(0x00, 0x05); /* set no bits, reset bit 0+2 */
+        DBG_MSU1 printf("Repeat clear!\n");
       }
 
       if(fpga_status_now & 0x0002) {
-	DBG_MSU1 printf("PLAY!\n");
-	set_msu_status(0x02, 0x01); /* set bit 0, reset bit 1 */
-	dac_play();
+        DBG_MSU1 printf("PLAY!\n");
+        set_msu_status(0x02, 0x01); /* set bit 0, reset bit 1 */
+        dac_play();
       } else {
-	DBG_MSU1 printf("PAUSE!\n");
-	set_msu_status(0x00, 0x03); /* set no bits, reset bit 1+0 */
-	dac_pause();
+        DBG_MSU1 printf("PAUSE!\n");
+        set_msu_status(0x00, 0x03); /* set no bits, reset bit 1+0 */
+        dac_pause();
       }
     }
 
     fpga_status_prev = fpga_status_now;
 
     /* handle loop / end */
-    if(bytes_read < MSU_DAC_BUFSIZE / 2) {
+    if(msu_audio_bytes_read < MSU_DAC_BUFSIZE / 2) {
       ff_sd_offload=0;
       sd_offload=0;
       if(msu_repeat) {
-	DBG_MSU1 printf("loop\n");
-	ff_sd_offload=1;
-	sd_offload_tgt=1;
-	f_lseek(&file_handle, 8L+msu_loop_point*4);
-	ff_sd_offload=1;
-	sd_offload_tgt=1;
-	f_read(&file_handle, file_buf, (MSU_DAC_BUFSIZE / 2) - bytes_read, &bytes_read);
+        DBG_MSU1 printf("loop\n");
+        ff_sd_offload=1;
+        sd_offload_tgt=1;
+        f_lseek(&file_handle, 8L+msu_loop_point*4);
+        ff_sd_offload=1;
+        sd_offload_tgt=1;
+        f_read(&file_handle, file_buf, (MSU_DAC_BUFSIZE / 2) - msu_audio_bytes_read, &msu_audio_bytes_read);
       } else {
-	set_msu_status(0x00, 0x02); /* clear play bit */
-	dac_pause();
+        set_msu_status(0x00, 0x02); /* clear play bit */
+        dac_pause();
       }
-      bytes_read = MSU_DAC_BUFSIZE;
-    }
-    if(msu1_check_reset()) {
-      f_close(&msufile);
-      f_close(&file_handle);
-      return 1;
+      msu_audio_bytes_read = MSU_DAC_BUFSIZE;
     }
   }
+  f_close(&file_handle);
+  DBG_MSU1 printf("Reset ");
+  if(msu_res == MSU_RESET_LONG) {
+    f_close(&msufile);
+    DBG_MSU1 printf("to menu\n");
+    return 1;
+  }
+  DBG_MSU1 printf("game\n");
+  return 0;
 }
 /* END OF MSU1 STUFF */

src/openocd-usb.cfg

@@ -5,8 +5,14 @@
 #
 
 interface ft2232
-ft2232_vid_pid 0x0403 0x6010
-ft2232_device_desc "Dual RS232"
-ft2232_layout "oocdlink"
-ft2232_latency 2
+ft2232_vid_pid 0x15ba 0x0003
+ft2232_device_desc "Olimex OpenOCD JTAG"
+ft2232_layout "olimex-jtag"
+
+
+#interface ft2232
+#ft2232_vid_pid 0x0403 0x6010
+#ft2232_device_desc "Dual RS232"
+#ft2232_layout "oocdlink"
+#ft2232_latency 2
 #adapter_khz 10

src/power.c

@@ -21,6 +21,6 @@ void power_init() {
                 | BV(PCRTC)
                 | BV(PCGPIO)
                 | BV(PCPWM1)
-//                 | BV(PCUSB)
+                | BV(PCUSB)
   ;
 }

src/sdcard.h

@@ -1,46 +0,0 @@
-/* sd2iec - SD/MMC to Commodore serial bus interface/controller
-   Copyright (C) 2007-2010  Ingo Korb <ingo@akana.de>
-
-   Inspiration and low-level SD/MMC access based on code from MMC2IEC
-     by Lars Pontoppidan et al., see sdcard.c|h and config.h.
-
-   FAT filesystem access based on code from ChaN and Jim Brain, see ff.c|h.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; version 2 of the License only.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-
-   sdcard.h: Definitions for the SD/MMC access routines
-
-*/
-
-#ifndef SDCARD_H
-#define SDCARD_H
-
-#include "diskio.h"
-
-#define SD_TX_BYTE(x)		spi_tx_byte(x, SPI_SD);
-#define SD_RX_BYTE(x)		spi_rx_byte(x, SPI_SD);
-#define SD_TX_BLOCK(x,y)	spi_tx_block(x,y, SPI_SD);
-#define SD_RX_BLOCK(x,y)	spi_rx_block(x,y, SPI_SD);
-
-/* These functions are weak-aliased to disk_... */
-void    sd_init(void);
-DSTATUS sd_status(BYTE drv);
-DSTATUS sd_initialize(BYTE drv);
-DRESULT sd_read(BYTE drv, BYTE *buffer, DWORD sector, BYTE count);
-DRESULT sd_write(BYTE drv, const BYTE *buffer, DWORD sector, BYTE count);
-DRESULT sd_getinfo(BYTE drv, BYTE page, void *buffer);
-
-void    sd_changed(void);
-#endif

src/sdnative.c

@@ -12,6 +12,7 @@
 #include "fileops.h"
 #include "bits.h"
 #include "fpga_spi.h"
+#include "memory.h"
 
 #define MAX_CARDS 1
 
@@ -112,6 +113,7 @@ uint8_t cmd[6]={0,0,0,0,0,0};
 uint8_t rsp[17];
 uint8_t csd[17];
 uint8_t cid[17];
+diskinfo0_t di;
 uint8_t ccs=0;
 uint32_t rca;
 
@@ -360,7 +362,7 @@ int send_command_fast(uint8_t* cmd, uint8_t* rsp, uint8_t* buf){
     default:
       rsplen = 6;
   }
-  if(dat && (buf==NULL)) {
+  if(dat && (buf==NULL) && !sd_offload) {
     printf("send_command_fast error: buf is null but data transfer expected.\n");
     return 0;
   }
@@ -387,7 +389,7 @@ int send_command_fast(uint8_t* cmd, uint8_t* rsp, uint8_t* buf){
   BITBAND(SD_CMDREG->FIODIR, SD_CMDPIN) = 0;
 
   if(rsplen) {
-    uint32_t timeout=2000000;
+    uint32_t timeout=200000;
     /* wait for response */
     while((BITBAND(SD_CMDREG->FIOPIN, SD_CMDPIN)) && --timeout) {
       wiggle_fast_neg1();
@@ -466,8 +468,8 @@ int send_command_fast(uint8_t* cmd, uint8_t* rsp, uint8_t* buf){
       while((BITBAND(SD_DAT0REG->FIOPIN, SD_DAT0PIN)) && --timeout) {
         wiggle_fast_neg1();
       }
-//printf("%ld\n", timeout);
-      DBG_SD if(!timeout) printf("timed out!\n");
+// printf("%ld\n", timeout);
+      if(!timeout) printf("timed out!\n");
       wiggle_fast_neg1(); /* eat the start bit */
       if(sd_offload) {
         if(sd_offload_partial) {
@@ -777,6 +779,7 @@ void send_datablock(uint8_t *buf) {
 }
 
 void read_block(uint32_t address, uint8_t *buf) {
+  DBG_SD printf("read_block addr=%08lx last_addr=%08lx  offld=%d/%d offst=%04x offed=%04x last_off=%04x\n", address, last_block, sd_offload, sd_offload_partial, sd_offload_partial_start, sd_offload_partial_end, last_offset);
   if(during_blocktrans == TRANS_READ && (last_block == address-1)) {
 //uart_putc('r');
 #ifdef CONFIG_SD_DATACRC
@@ -854,10 +857,38 @@ void write_block(uint32_t address, uint8_t* buf) {
   }
 }
 
+/* send STOP_TRANSMISSION after multiple block write
+ * and reset during_blocktrans status */
+
+void flush_write(void) {
+  cmd_fast(STOP_TRANSMISSION, 0, 0x61, NULL, rsp);
+  wait_busy();
+  during_blocktrans = TRANS_NONE;
+}
+
 //
 // Public functions
 //
 
+DRESULT sdn_ioctl(BYTE drv, BYTE cmd, void *buffer) {
+  DRESULT res;
+  if(drv >= MAX_CARDS) {
+    res = STA_NOINIT|STA_NODISK;
+  } else {
+    switch(cmd) {
+      case CTRL_SYNC:
+        flush_write();
+        res = RES_OK;
+        break;
+
+      default:
+        res = RES_PARERR;
+    }
+  }
+  return res;
+}
+DRESULT disk_ioctl(BYTE drv, BYTE cmd, void *buffer) __attribute__ ((weak, alias("sdn_ioctl")));
+
 DRESULT sdn_read(BYTE drv, BYTE *buffer, DWORD sector, BYTE count) {
   uint8_t sec;
   if(drv >= MAX_CARDS) {
@@ -873,7 +904,7 @@ DRESULT sdn_read(BYTE drv, BYTE *buffer, DWORD sector, BYTE count) {
 }
 DRESULT disk_read(BYTE drv, BYTE *buffer, DWORD sector, BYTE count) __attribute__ ((weak, alias("sdn_read")));
 
-DRESULT sdn_initialize(BYTE drv) {
+DSTATUS sdn_initialize(BYTE drv) {
 
   uint8_t rsp[17]; /* space for response */
   int rsplen;
@@ -902,7 +933,7 @@ DRESULT sdn_initialize(BYTE drv) {
 
   if((rsplen=cmd_slow(SEND_IF_COND, 0x000001aa, 0x87, NULL, rsp))) {
     DBG_SD printf("CMD8 response:\n");
-    DBG_SD uart_trace(rsp, 0, rsplen);
+    DBG_SD uart_trace(rsp, 0, rsplen, 0);
     hcs=1;
   }
   while(1) {
@@ -928,6 +959,7 @@ DRESULT sdn_initialize(BYTE drv) {
 
   /* record CSD for getinfo */
   cmd_slow(SEND_CSD, rca, 0, NULL, csd);
+  sdn_getinfo(drv, 0, &di);
 
   /* record CID */
   cmd_slow(SEND_CID, rca, 0, NULL, cid);
@@ -970,6 +1002,7 @@ void sdn_init(void) {
   BITBAND(SD_CLKREG->FIODIR, SD_CLKPIN) = 1;
   BITBAND(SD_CMDREG->FIODIR, SD_CMDPIN) = 1;
   BITBAND(SD_CMDREG->FIOPIN, SD_CMDPIN) = 1;
+  LPC_PINCON->PINMODE0 &= ~(BV(14) | BV(15));
   LPC_GPIO2->FIOPIN0 = 0x00;
   LPC_GPIO2->FIOMASK0 = ~0xf;
 }
@@ -1056,3 +1089,55 @@ void sdn_changed() {
   }
 }
 
+/* measure sd access time */
+void sdn_gettacc(uint32_t *tacc_max, uint32_t *tacc_avg) {
+  uint32_t sec1 = 0;
+  uint32_t sec2 = 0;
+  uint32_t time, time_max = 0;
+  uint32_t time_avg = 0LL;
+  uint32_t numread = 16384;
+  int i;
+  int sec_step = di.sectorcount / numread - 1;
+  if(disk_state == DISK_REMOVED) return;
+  sdn_checkinit(0);
+  for (i=0; i < 128; i++) {
+    sd_offload_tgt=2;
+    sd_offload=1;
+    sdn_read(0, NULL, 0, 1);
+    sd_offload_tgt=2;
+    sd_offload=1;
+    sdn_read(0, NULL, i*sec_step, 1);
+  }
+  for (i=0; i < numread && sram_readbyte(SRAM_CMD_ADDR) != 0x00 && disk_state != DISK_REMOVED; i++) {
+  /* reset timer */
+    LPC_RIT->RICTRL = 0;
+    sd_offload_tgt=2;
+    sd_offload=1;
+    sdn_read(0, NULL, sec1, 2);
+    sec1 += 2;
+  /* start timer */
+    LPC_RIT->RICOUNTER = 0;
+    LPC_RIT->RICTRL = BV(RITEN);
+    sd_offload_tgt=2;
+    sd_offload=1;
+    sdn_read(0, NULL, sec2, 1);
+  /* read timer */
+    time = LPC_RIT->RICOUNTER;
+/*    sd_offload_tgt=2;
+    sd_offload=1;
+    sdn_read(0, NULL, sec2, 15);*/
+    time_avg += time/16;
+    if(time > time_max) {
+      time_max = time;
+    }
+    sec2 += sec_step;
+  }
+  time_avg = time_avg / (i+1) * 16;
+  sd_offload=0;
+  LPC_RIT->RICTRL = 0;
+  if(disk_state != DISK_REMOVED) {
+    *tacc_max = time_max/(CONFIG_CPU_FREQUENCY / 1000000)-114;
+    *tacc_avg = time_avg/(CONFIG_CPU_FREQUENCY / 1000000)-114;
+  }
+}
+

src/sdnative.h

@@ -22,9 +22,10 @@ DSTATUS sdn_initialize(BYTE drv);
 DRESULT sdn_read(BYTE drv, BYTE *buffer, DWORD sector, BYTE count);
 DRESULT sdn_write(BYTE drv, const BYTE *buffer, DWORD sector, BYTE count);
 DRESULT sdn_getinfo(BYTE drv, BYTE page, void *buffer);
+DRESULT sdn_ioctl(BYTE drv, BYTE cmd, void *buffer);
 
 void    sdn_changed(void);
 uint8_t* sdn_getcid(void);
-
+void    sdn_gettacc(uint32_t *tacc_max, uint32_t *tacc_avg);
 #endif
 

src/smc.c

@@ -59,6 +59,7 @@ void smc_id(snes_romprops_t* props) {
   uint8_t score, maxscore=1, score_idx=2; /* assume LoROM */
   snes_header_t* header = &(props->header);
 
+  props->load_address = 0;
   props->has_dspx = 0;
   props->has_st0010 = 0;
   props->has_cx4 = 0;
@@ -94,6 +95,15 @@ void smc_id(snes_romprops_t* props) {
           props->romsize_bytes = 0x100000;
           props->expramsize_bytes = 0;
           props->mapper_id = 3; /* BS-X Memory Map */
+          props->region = 0; /* BS-X only existed in Japan */
+          uint8_t alloc = header->name[0x10];
+          if(alloc) {
+            while(!(alloc & 0x01)) {
+              props->load_address += 0x20000;
+              alloc >>= 1;
+            }
+          }
+          printf("load address: %lx\n", props->load_address);
           return;
         }
       }
@@ -186,12 +196,19 @@ void smc_id(snes_romprops_t* props) {
       }
   }
   if(header->romsize == 0 || header->romsize > 13) {
-    header->romsize = 13;
+    props->romsize_bytes = 1024;
+    header->romsize = 0;
+    if(file_handle.fsize >= 1024) {
+      while(props->romsize_bytes < file_handle.fsize-1) {
+        header->romsize++;
+        props->romsize_bytes <<= 1;
+      }
+    }
   }
   props->ramsize_bytes = (uint32_t)1024 << header->ramsize;
   props->romsize_bytes = (uint32_t)1024 << header->romsize;
   props->expramsize_bytes = (uint32_t)1024 << header->expramsize;
-/*dprintf("ramsize_bytes: %ld\n", props->ramsize_bytes); */
+  //dprintf("ramsize_bytes: %ld\n", props->ramsize_bytes); 
   if(props->ramsize_bytes > 32768 || props->ramsize_bytes < 2048) {
     props->ramsize_bytes = 0;
   }

src/smc.h

@@ -84,6 +84,7 @@ typedef struct _snes_romprops {
   uint8_t has_cx4;            /* CX4 presence flag */
   uint8_t fpga_features;      /* feature/peripheral enable bits*/
   uint8_t region;             /* game region (derived from destination code) */
+  uint32_t load_address;      /* where to load the ROM image */
   snes_header_t header;       /* original header from ROM image */
 } snes_romprops_t;
 

src/snes.c

@@ -44,10 +44,11 @@ uint32_t saveram_crc, saveram_crc_old;
 extern snes_romprops_t romprops;
 
 volatile int reset_changed;
+volatile int reset_pressed;
 
 void prepare_reset() {
   snes_reset(1);
-  delay_ms(1);
+  delay_ms(SNES_RESET_PULSELEN_MS);
   if(romprops.ramsize_bytes && fpga_test() == FPGA_TEST_TOKEN) {
     writeled(1);
     save_sram(file_lfn, romprops.ramsize_bytes, SRAM_SAVE_ADDR);
@@ -70,12 +71,22 @@ void snes_init() {
   snes_reset(1);
 }
 
+void snes_reset_pulse() {
+  snes_reset(1);
+  delay_ms(SNES_RESET_PULSELEN_MS);
+  snes_reset(0);
+}
+
 /*
  * sets the SNES reset state.
  *
  *  state: put SNES in reset state when 1, release when 0
  */
 void snes_reset(int state) {
+  if (state == 0)
+    printf("Releasing SNES RESET\n");
+  else
+    printf("Pull SNES RESET\n");
   BITBAND(SNES_RESET_REG->FIODIR, SNES_RESET_BIT) = state;
 }
 
@@ -116,7 +127,7 @@ void snes_main_loop() {
       samecount++;
     }
     if(diffcount>=1 && samecount==5) {
-      printf("SaveRAM CRC: 0x%04lx; saving\n", saveram_crc);
+      printf("SaveRAM CRC: 0x%04lx; saving %s\n", saveram_crc, file_lfn);
       writeled(1);
       save_sram(file_lfn, romprops.ramsize_bytes, SRAM_SAVE_ADDR);
       writeled(0);
@@ -128,7 +139,7 @@ void snes_main_loop() {
       writeled(1);
       save_sram(file_lfn, romprops.ramsize_bytes, SRAM_SAVE_ADDR);
       didnotsave=0;
-      writeled(0);
+      writeled(1);
     }
     saveram_crc_old = saveram_crc;
   }
@@ -163,12 +174,16 @@ void get_selected_name(uint8_t* fn) {
   sram_readblock(fn, addr + 7 + SRAM_MENU_ADDR, 256);
 }
 
-void snes_bootprint(void* msg) {
+void snes_bootprint(void* msg)
+{
+  printf("%s\n", (char*)msg);
   sram_writeblock(msg, SRAM_CMD_ADDR, 33);
 }
 
-void snes_menu_errmsg(int err, void* msg) {
+void snes_menu_errmsg(int err, void* msg)
+{
+  printf("%d: %s\n", err, (char*)msg);
   sram_writeblock(msg, SRAM_CMD_ADDR+1, 64);
   sram_writebyte(err, SRAM_CMD_ADDR);
 }
-
+  

src/snes.h

@@ -30,15 +30,21 @@
 #define SNES_CMD_LOADROM   (1)
 #define SNES_CMD_SETRTC    (2)
 #define SNES_CMD_SYSINFO   (3)
+#define SNES_CMD_LOADLAST  (4)
+#define SNES_CMD_LOADSPC   (5)
+#define SNES_CMD_RESET     (6)
 
-#define MENU_ERR_OK		(0)
-#define MENU_ERR_NODSP	(1)
-#define MENU_ERR_NOBSX	(2)
+#define MENU_ERR_OK     (0)
+#define MENU_ERR_NODSP  (1)
+#define MENU_ERR_NOBSX  (2)
+
+#define SNES_RESET_PULSELEN_MS	(1)
 
 uint8_t crc_valid;
 
 void prepare_reset(void);
 void snes_init(void);
+void snes_reset_pulse(void);
 void snes_reset(int state);
 uint8_t get_snes_reset(void);
 void snes_main_loop(void);

src/sort.c

@@ -15,7 +15,7 @@
 */
 
 uint32_t stat_getstring = 0;
-static char sort_str1[21], sort_str2[21];
+static char sort_str1[SORT_STRLEN+1], sort_str2[SORT_STRLEN+1];
 uint32_t ptrcache[QSORT_MAXELEM] IN_AHBRAM;
 
 /* get element from pointer table in external RAM*/
@@ -50,13 +50,18 @@ int sort_cmp_elem(const void* elem1, const void* elem2) {
   if (!(el1 & 0x80000000) && (el2 & 0x80000000)) {
     return 1;
   }
-/*  
-  uint16_t cmp_i;
-  for(cmp_i=0; cmp_i<8 && sort_long1[cmp_i] == sort_long2[cmp_i]; cmp_i++);
-  if(cmp_i==8) {
-    return 0;
+
+  if (*sort_str1 == '.') return -1;
+  if (*sort_str2 == '.') return 1;
+
+  /* Do not compare trailing slashes of directory names */
+  if ((el1 & 0x80000000) && (el2 & 0x80000000)) {
+    char *str1_slash = strrchr(sort_str1, '/');
+    char *str2_slash = strrchr(sort_str2, '/');
+    if(str1_slash != NULL) *str1_slash = 0;
+    if(str2_slash != NULL) *str2_slash = 0;
   }
-  return sort_long1[cmp_i]-sort_long2[cmp_i]; */
+
   return strcasecmp(sort_str1, sort_str2);
 }
 
@@ -66,13 +71,12 @@ void sort_getstring_for_dirent(char *ptr, uint32_t addr) {
   if(addr & 0x80000000) {
     /* is directory link, name offset 4 */
     leaf_offset = sram_readbyte(addr + 4 + SRAM_MENU_ADDR);
-    sram_readblock(ptr, addr + 5 + leaf_offset + SRAM_MENU_ADDR, 20);
+    sram_readstrn(ptr, addr + 5 + leaf_offset + SRAM_MENU_ADDR, SORT_STRLEN);
   } else {
     /* is file link, name offset 6 */
     leaf_offset = sram_readbyte(addr + 6 + SRAM_MENU_ADDR);
-    sram_readblock(ptr, addr + 7 + leaf_offset + SRAM_MENU_ADDR, 20);
+    sram_readstrn(ptr, addr + 7 + leaf_offset + SRAM_MENU_ADDR, SORT_STRLEN);
   }
-  ptr[20]=0;
 }
 
 void sort_heapify(uint32_t addr, unsigned int i, unsigned int heapsize)

src/spi.c

@@ -36,21 +36,13 @@ void spi_preinit() {
   BITBAND(LPC_SC->SSP_PCLKREG, SSP_PCLKBIT) = 1;
 }
 
-void spi_init(spi_speed_t speed) {
+void spi_init() {
 
   /* configure data format - 8 bits, SPI, CPOL=0, CPHA=0, 1 clock per bit */
   SSP_REGS->CR0 = (8-1);
 
   /* set clock prescaler */
-  if (speed == SPI_SPEED_FAST) {
-    SSP_REGS->CPSR = SSP_CLK_DIVISOR_FAST;
-  } else if (speed == SPI_SPEED_SLOW) {
-    SSP_REGS->CPSR = SSP_CLK_DIVISOR_SLOW;
-  } else if (speed == SPI_SPEED_FPGA_FAST) {
-    SSP_REGS->CPSR = SSP_CLK_DIVISOR_FPGA_FAST;
-  } else {
-    SSP_REGS->CPSR = SSP_CLK_DIVISOR_FPGA_SLOW;
-  }
+  SSP_REGS->CPSR = SSP_CLK_DIVISOR;
 
   /* Enable SSP */
   SSP_REGS->CR1 = BV(1);
@@ -189,25 +181,3 @@ void spi_rx_block(void *ptr, unsigned int length) {
     SSP_REGS->DMACR = 0;
   }
 }
-
-void spi_set_speed(spi_speed_t speed) {
-  /* Wait until TX fifo is empty */
-  while (!BITBAND(SSP_REGS->SR, 0)) ;
-
-  /* Disable SSP (FIXME: Is this required?) */
-  SSP_REGS->CR1 = 0;
-
-  /* Change clock divisor */
-  if (speed == SPI_SPEED_FAST) {
-    SSP_REGS->CPSR = SSP_CLK_DIVISOR_FAST;
-  } else if (speed == SPI_SPEED_SLOW) {
-    SSP_REGS->CPSR = SSP_CLK_DIVISOR_SLOW;
-  } else if (speed == SPI_SPEED_FPGA_FAST) {
-    SSP_REGS->CPSR = SSP_CLK_DIVISOR_FPGA_FAST;
-  } else {
-    SSP_REGS->CPSR = SSP_CLK_DIVISOR_FPGA_SLOW;
-  }
-
-  /* Enable SSP */
-  SSP_REGS->CR1 = BV(1);
-}

src/spi.h

@@ -42,7 +42,7 @@ typedef enum { SPI_SPEED_FAST, SPI_SPEED_SLOW, SPI_SPEED_FPGA_FAST, SPI_SPEED_FP
 void spi_preinit(void);
 
 /* Initialize SPI interface */
-void spi_init(spi_speed_t speed);
+void spi_init(void);
 
 /* Transmit a single byte */
 void spi_tx_byte(uint8_t data);
@@ -59,9 +59,6 @@ uint8_t spi_rx_byte(void);
 /* Receive a data block */
 void spi_rx_block(void *data, unsigned int length);
 
-/* Switch speed of SPI interface */
-void spi_set_speed(spi_speed_t speed);
-
 /* wait for SPI TX FIFO to become empty */
 void spi_tx_sync(void);
 

src/sysinfo.c

@@ -0,0 +1,127 @@
+#include <arm/NXP/LPC17xx/LPC17xx.h>
+#include <arm/bits.h>
+#include <string.h>
+#include "config.h"
+#include "diskio.h"
+#include "ff.h"
+#include "timer.h"
+#include "uart.h"
+#include "fileops.h"
+#include "memory.h"
+#include "snes.h"
+#include "fpga.h"
+#include "fpga_spi.h"
+#include "cic.h"
+#include "sdnative.h"
+
+#include "sysinfo.h"
+
+static uint32_t sd_tacc_max, sd_tacc_avg;
+
+void sysinfo_loop() {
+  sd_tacc_max = 0;
+  sd_tacc_avg = 0;
+  while(sram_readbyte(SRAM_CMD_ADDR) != 0x00) {
+    write_sysinfo();
+    delay_ms(100);
+  }
+}
+
+void write_sysinfo() {
+  uint32_t sram_addr = SRAM_SYSINFO_ADDR;
+  char linebuf[40];
+  int len;
+  int sd_ok = 0;
+  uint8_t *sd_cid = sdn_getcid();
+  uint32_t sd_tacc_max_int = sd_tacc_max / 1000;
+  uint32_t sd_tacc_max_frac = sd_tacc_max - (sd_tacc_max_int * 1000);
+  uint32_t sd_tacc_avg_int = sd_tacc_avg / 1000;
+  uint32_t sd_tacc_avg_frac = sd_tacc_avg - (sd_tacc_avg_int * 1000);
+  uint16_t numfiles = sram_readshort(SRAM_DB_ADDR+12);
+  uint16_t numdirs = sram_readshort(SRAM_DB_ADDR+14);
+  int32_t sysclk = get_snes_sysclk();
+
+  len = snprintf(linebuf, sizeof(linebuf), "Firmware version: %s", CONFIG_VERSION);
+  sram_writeblock(linebuf, sram_addr, 40);
+  sram_memset(sram_addr+len, 40-len, 0x20);
+  sram_addr += 40;
+  len = snprintf(linebuf, sizeof(linebuf), "                                        ");
+  sram_writeblock(linebuf, sram_addr, 40);
+  sram_memset(sram_addr+len, 40-len, 0x20);
+  sram_addr += 40;
+  if(disk_state == DISK_REMOVED) {
+    sd_tacc_max = 0;
+    sd_tacc_avg = 0;
+    len = snprintf(linebuf, sizeof(linebuf), "                                        ");
+    sram_writeblock(linebuf, sram_addr, 40);
+    sram_memset(sram_addr+len, 40-len, 0x20);
+    sram_addr += 40;
+    len = snprintf(linebuf, sizeof(linebuf), "         *** SD Card removed ***        ");
+    sram_writeblock(linebuf, sram_addr, 40);
+    sram_memset(sram_addr+len, 40-len, 0x20);
+    sram_addr += 40;
+    len = snprintf(linebuf, sizeof(linebuf), "                                        ");
+    sram_writeblock(linebuf, sram_addr, 40);
+    sram_memset(sram_addr+len, 40-len, 0x20);
+    sram_addr += 40;
+    len = snprintf(linebuf, sizeof(linebuf), "                                        ");
+    sram_writeblock(linebuf, sram_addr, 40);
+    sram_memset(sram_addr+len, 40-len, 0x20);
+    sram_addr += 40;
+    sd_ok = 0;
+  } else {
+    len = snprintf(linebuf, sizeof(linebuf), "SD Maker/OEM:    0x%02x, \"%c%c\"", sd_cid[1], sd_cid[2], sd_cid[3]);
+    sram_writeblock(linebuf, sram_addr, 40);
+    sram_memset(sram_addr+len, 40-len, 0x20);
+    sram_addr += 40;
+    len = snprintf(linebuf, sizeof(linebuf), "SD Product Name: \"%c%c%c%c%c\", Rev. %d.%d", sd_cid[4], sd_cid[5], sd_cid[6], sd_cid[7], sd_cid[8], sd_cid[9]>>4, sd_cid[9]&15);
+    sram_writeblock(linebuf, sram_addr, 40);
+    sram_memset(sram_addr+len, 40-len, 0x20);
+    sram_addr += 40;
+    len = snprintf(linebuf, sizeof(linebuf), "SD Serial No.:   %02x%02x%02x%02x, Mfd. %d/%02d", sd_cid[10], sd_cid[11], sd_cid[12], sd_cid[13], 2000+((sd_cid[14]&15)<<4)+(sd_cid[15]>>4), sd_cid[15]&15);
+    sram_writeblock(linebuf, sram_addr, 40);
+    sram_memset(sram_addr+len, 40-len, 0x20);
+    sram_addr += 40;
+    if(sd_tacc_max)
+      len = snprintf(linebuf, sizeof(linebuf), "SD acc. time: %ld.%03ld / %ld.%03ld ms avg/max", sd_tacc_avg_int, sd_tacc_avg_frac, sd_tacc_max_int, sd_tacc_max_frac);
+    else
+      len = snprintf(linebuf, sizeof(linebuf), "SD acc. time: measuring...  ");
+    sram_writeblock(linebuf, sram_addr, 40);
+    sram_memset(sram_addr+len, 40-len, 0x20);
+    sram_addr += 40;
+    sd_ok = 1;
+  }
+  len = snprintf(linebuf, sizeof(linebuf), "                                        ");
+  sram_writeblock(linebuf, sram_addr, 40);
+  sram_memset(sram_addr+len, 40-len, 0x20);
+  sram_addr += 40;
+  len = snprintf(linebuf, sizeof(linebuf), "CIC state: %s", get_cic_statefriendlyname(get_cic_state()));
+  sram_writeblock(linebuf, sram_addr, 40);
+  sram_memset(sram_addr+len, 40-len, 0x20);
+  sram_addr += 40;
+  if(sysclk == -1)
+    len = snprintf(linebuf, sizeof(linebuf), "SNES master clock: measuring...");
+  else
+    len = snprintf(linebuf, sizeof(linebuf), "SNES master clock: %ldHz    ", get_snes_sysclk());
+  sram_writeblock(linebuf, sram_addr, 40);
+  sram_memset(sram_addr+len, 40-len, 0x20);
+  sram_addr += 40;
+  len = snprintf(linebuf, sizeof(linebuf), "                                        ");
+  sram_writeblock(linebuf, sram_addr, 40);
+  sram_memset(sram_addr+len, 40-len, 0x20);
+  sram_addr += 40;
+  len = snprintf(linebuf, sizeof(linebuf), "Database: %d files, %d dirs", numfiles, numdirs);
+  sram_writeblock(linebuf, sram_addr, 40);
+  sram_memset(sram_addr+len, 40-len, 0x20);
+  sram_addr += 40;
+  len = snprintf(linebuf, sizeof(linebuf), "                                        ");
+  sram_writeblock(linebuf, sram_addr, 40);
+  sram_memset(sram_addr+len, 40-len, 0x20);
+  sram_addr += 40;
+  len = snprintf(linebuf, sizeof(linebuf), "                                        ");
+  sram_writeblock(linebuf, sram_addr, 40);
+  sram_memset(sram_addr+len, 40-len, 0x20);
+  sram_hexdump(SRAM_SYSINFO_ADDR, 13*40);
+  if(sysclk != -1 && sd_ok)sdn_gettacc(&sd_tacc_max, &sd_tacc_avg);
+}
+

src/sysinfo.h

@@ -0,0 +1,7 @@
+#ifndef _SYSINFO_H
+#define _SYSINFO_H
+
+void write_sysinfo(void);
+void sysinfo_loop(void);
+
+#endif

src/tests/Makefile

@@ -138,7 +138,8 @@ CFLAGS += $(CDEFS) $(CINCS)
 CFLAGS += -O$(OPT)
 CFLAGS += $(CPUFLAGS) -nostartfiles
 #CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
-CFLAGS += -Wall -Wstrict-prototypes -Werror
+CFLAGS += -Wall -Wstrict-prototypes
+# -Werror
 CFLAGS += -Wa,-adhlns=$(OBJDIR)/$(<:.c=.lst)
 CFLAGS += -I$(OBJDIR)
 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

src/tests/cli.c

@@ -138,7 +138,7 @@ static int8_t parse_wordlist(char *wordlist) {
         return -1;
       }
 
-      if (tolower(c) != tolower(*cur)) {
+      if (tolower((int)c) != tolower((int)*cur)) {
         // Check for end-of-word
         if (cur != curchar && (*cur == ' ' || *cur == 0)) {
           // Partial match found, return that

src/tests/config.h

@@ -38,7 +38,8 @@
 //#define CONFIG_CPU_FREQUENCY      46000000
 #define CONFIG_UART_PCLKDIV       1
 #define CONFIG_UART_TX_BUF_SHIFT  8
-#define CONFIG_UART_BAUDRATE      921600
+//#define CONFIG_UART_BAUDRATE      921600
+#define CONFIG_UART_BAUDRATE 115200
 #define CONFIG_UART_DEADLOCKABLE
 
 #define SSP_CLK_DIVISOR_FAST 2

src/tests/openocd-usb.cfg

@@ -5,8 +5,14 @@
 #
 
 interface ft2232
-ft2232_vid_pid 0x0403 0x6010
-ft2232_device_desc "Dual RS232"
-ft2232_layout "oocdlink"
-ft2232_latency 2
+ft2232_vid_pid 0x15ba 0x0003
+ft2232_device_desc "Olimex OpenOCD JTAG"
+ft2232_layout "olimex-jtag"
+
+
+#interface ft2232
+#ft2232_vid_pid 0x0403 0x6010
+#ft2232_device_desc "Dual RS232"
+#ft2232_layout "oocdlink"
+#ft2232_latency 2
 #adapter_khz 10